From: Vikas Manocha Date: Tue, 18 Nov 2014 18:42:23 +0000 (-0800) Subject: stv0991: enable ethernet support X-Git-Tag: v2015.01-rc4~35 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=2ce4eaf4c89e371aeb69392b68dbb2f705c28144;p=u-boot stv0991: enable ethernet support Signed-off-by: Vikas Manocha --- diff --git a/arch/arm/cpu/armv7/stv0991/clock.c b/arch/arm/cpu/armv7/stv0991/clock.c index aca6aba414..70b8a8d984 100644 --- a/arch/arm/cpu/armv7/stv0991/clock.c +++ b/arch/arm/cpu/armv7/stv0991/clock.c @@ -13,6 +13,13 @@ static struct stv0991_cgu_regs *const stv0991_cgu_regs = \ (struct stv0991_cgu_regs *) (CGU_BASE_ADDR); +void enable_pll1(void) +{ + /* pll1 already configured for 1000Mhz, just need to enable it */ + writel(readl(&stv0991_cgu_regs->pll1_ctrl) & ~(0x01), + &stv0991_cgu_regs->pll1_ctrl); +} + void clock_setup(int peripheral) { switch (peripheral) { @@ -20,6 +27,13 @@ void clock_setup(int peripheral) writel(UART_CLK_CFG, &stv0991_cgu_regs->uart_freq); break; case ETH_CLOCK_CFG: + enable_pll1(); + writel(ETH_CLK_CFG, &stv0991_cgu_regs->eth_freq); + + /* Clock selection for ethernet tx_clk & rx_clk*/ + writel((readl(&stv0991_cgu_regs->eth_ctrl) & ETH_CLK_MASK) + | ETH_CLK_CTRL, &stv0991_cgu_regs->eth_ctrl); + break; default: break; diff --git a/arch/arm/cpu/armv7/stv0991/pinmux.c b/arch/arm/cpu/armv7/stv0991/pinmux.c index 6d4414aaa5..1d086a235d 100644 --- a/arch/arm/cpu/armv7/stv0991/pinmux.c +++ b/arch/arm/cpu/armv7/stv0991/pinmux.c @@ -41,6 +41,20 @@ int stv0991_pinmux_config(int peripheral) CFG_GPIOB_16_UART_TX, &stv0991_creg->mux7); break; + case ETH_GPIOB_10_31_C_0_4: + writel(readl(&stv0991_creg->mux6) & 0x000000FF, + &stv0991_creg->mux6); + writel(0x00000000, &stv0991_creg->mux7); + writel(0x00000000, &stv0991_creg->mux8); + writel(readl(&stv0991_creg->mux9) & 0xFFF00000, + &stv0991_creg->mux9); + /* Ethernet Voltage configuration to 1.8V*/ + writel((readl(&stv0991_creg->vdd_pad1) & VDD_ETH_PS_MASK) | + ETH_VDD_CFG, &stv0991_creg->vdd_pad1); + writel((readl(&stv0991_creg->vdd_pad1) & VDD_ETH_PS_MASK) | + ETH_M_VDD_CFG, &stv0991_creg->vdd_pad1); + + break; default: break; } diff --git a/arch/arm/include/asm/arch-stv0991/gpio.h b/arch/arm/include/asm/arch-stv0991/gpio.h new file mode 100644 index 0000000000..9131ded5eb --- /dev/null +++ b/arch/arm/include/asm/arch-stv0991/gpio.h @@ -0,0 +1,22 @@ +/* + * (C) Copyright 2014 + * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARCH_STV0991_GPIO_H +#define __ASM_ARCH_STV0991_GPIO_H + +enum gpio_direction { + GPIO_DIRECTION_IN, + GPIO_DIRECTION_OUT, +}; + +struct gpio_regs { + u32 data; /* offset 0x0 */ + u32 reserved[0xff]; /* 0x4--0x3fc */ + u32 dir; /* offset 0x400 */ +}; + +#endif /* __ASM_ARCH_STV0991_GPIO_H */ diff --git a/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h b/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h index 4926395622..ddcbb57a92 100644 --- a/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h +++ b/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h @@ -77,4 +77,40 @@ struct stv0991_cgu_regs { #define UART_CLK_CFG (4 << DIV_SHIFT_UART \ | 1 << MDIV_SHIFT_UART | CLK_UART_MCLK) +/* CGU Ethernet clock config */ +#define CLK_ETH_MCLK 0 +#define CLK_ETH_PLL1 1 +#define CLK_ETH_PLL2 2 + +#define MDIV_SHIFT_ETH 3 +#define DIV_SHIFT_ETH 6 +#define DIV_ETH_125 9 +#define DIV_ETH_50 12 +#define DIV_ETH_P2P 15 + +#define ETH_CLK_CFG (4 << DIV_ETH_P2P | 4 << DIV_ETH_50 \ + | 1 << DIV_ETH_125 \ + | 0 << DIV_SHIFT_ETH \ + | 3 << MDIV_SHIFT_ETH | CLK_ETH_PLL1) + /* CGU Ethernet control */ + +#define ETH_CLK_TX_EXT_PHY 0 +#define ETH_CLK_TX_125M 1 +#define ETH_CLK_TX_25M 2 +#define ETH_CLK_TX_2M5 3 +#define ETH_CLK_TX_DIS 7 + +#define ETH_CLK_RX_EXT_PHY 0 +#define ETH_CLK_RX_25M 1 +#define ETH_CLK_RX_2M5 2 +#define ETH_CLK_RX_DIS 3 +#define RX_CLK_SHIFT 3 +#define ETH_CLK_MASK ~(0x1F) + +#define ETH_PHY_MODE_GMII 0 +#define ETH_PHY_MODE_RMII 1 +#define ETH_PHY_CLK_DIS 1 + +#define ETH_CLK_CTRL (ETH_CLK_RX_EXT_PHY << RX_CLK_SHIFT \ + | ETH_CLK_TX_EXT_PHY) #endif diff --git a/arch/arm/include/asm/arch-stv0991/stv0991_creg.h b/arch/arm/include/asm/arch-stv0991/stv0991_creg.h index 045dbfe472..c804eb5e4c 100644 --- a/arch/arm/include/asm/arch-stv0991/stv0991_creg.h +++ b/arch/arm/include/asm/arch-stv0991/stv0991_creg.h @@ -79,4 +79,17 @@ struct stv0991_creg { #define CFG_GPIOC_30_MODE_LOW (0 << GPIOC_30_MODE_SHIFT) #define CFG_GPIOC_30_MODE_HIGH (1 << GPIOC_30_MODE_SHIFT) +/* CREG Ethernet pad config */ + +#define VDD_ETH_PS_1V8 0 +#define VDD_ETH_PS_2V5 2 +#define VDD_ETH_PS_3V3 3 +#define VDD_ETH_PS_MASK 0x3 + +#define VDD_ETH_PS_SHIFT 12 +#define ETH_VDD_CFG (VDD_ETH_PS_1V8 << VDD_ETH_PS_SHIFT) + +#define VDD_ETH_M_PS_SHIFT 28 +#define ETH_M_VDD_CFG (VDD_ETH_PS_1V8 << VDD_ETH_M_PS_SHIFT) + #endif diff --git a/arch/arm/include/asm/arch-stv0991/stv0991_periph.h b/arch/arm/include/asm/arch-stv0991/stv0991_periph.h index f72377110a..f728c83cb7 100644 --- a/arch/arm/include/asm/arch-stv0991/stv0991_periph.h +++ b/arch/arm/include/asm/arch-stv0991/stv0991_periph.h @@ -17,6 +17,7 @@ enum periph_id { UART_GPIOC_30_31 = 0, UART_GPIOB_16_17, + ETH_GPIOB_10_31_C_0_4, PERIPH_ID_I2C0, PERIPH_ID_I2C1, PERIPH_ID_I2C2, diff --git a/board/st/stv0991/stv0991.c b/board/st/stv0991/stv0991.c index bdeb53c1a7..989fb5e558 100644 --- a/board/st/stv0991/stv0991.c +++ b/board/st/stv0991/stv0991.c @@ -9,9 +9,16 @@ #include #include #include +#include +#include +#include +#include DECLARE_GLOBAL_DATA_PTR; +struct gpio_regs *const gpioa_regs = + (struct gpio_regs *) GPIOA_BASE_ADDR; + #ifdef CONFIG_SHOW_BOOT_PROGRESS void show_boot_progress(int progress) { @@ -19,11 +26,26 @@ void show_boot_progress(int progress) } #endif +void enable_eth_phy(void) +{ + /* Set GPIOA_06 pad HIGH (Appli board)*/ + writel(readl(&gpioa_regs->dir) | 0x40, &gpioa_regs->dir); + writel(readl(&gpioa_regs->data) | 0x40, &gpioa_regs->data); +} +int board_eth_enable(void) +{ + stv0991_pinmux_config(ETH_GPIOB_10_31_C_0_4); + clock_setup(ETH_CLOCK_CFG); + enable_eth_phy(); + return 0; +} + /* * Miscellaneous platform dependent initialisations */ int board_init(void) { + board_eth_enable(); return 0; } @@ -33,6 +55,7 @@ int board_uart_init(void) clock_setup(UART_CLOCK_CFG); return 0; } + #ifdef CONFIG_BOARD_EARLY_INIT_F int board_early_init_f(void) { @@ -52,3 +75,17 @@ void dram_init_banksize(void) gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int ret = 0; + +#if defined(CONFIG_DESIGNWARE_ETH) + u32 interface = PHY_INTERFACE_MODE_MII; + if (designware_initialize(GMAC_BASE_ADDR, interface) >= 0) + ret++; +#endif + return ret; +} +#endif diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h index 864a63f0de..a316f63528 100644 --- a/include/configs/stv0991.h +++ b/include/configs/stv0991.h @@ -7,11 +7,11 @@ #ifndef __CONFIG_STV0991_H #define __CONFIG_STV0991_H - #define CONFIG_SYS_DCACHE_OFF #define CONFIG_SYS_ICACHE_OFF #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH #define CONFIG_BOARD_EARLY_INIT_F + #define CONFIG_SYS_CORTEX_R4 #define CONFIG_SYS_GENERIC_BOARD @@ -55,4 +55,17 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) +/* GMAC related configs */ + +#define CONFIG_MII +#define CONFIG_PHYLIB +#define CONFIG_CMD_NET +#define CONFIG_DESIGNWARE_ETH +#define CONFIG_DW_ALTDESCRIPTOR +#define CONFIG_PHY_MICREL + +/* Command support defines */ +#define CONFIG_CMD_PING +#define CONFIG_PHY_RESET_DELAY 10000 /* in usec */ + #endif /* __CONFIG_H */