From: wdenk Date: Wed, 9 Jun 2004 21:50:45 +0000 (+0000) Subject: * Patch by Yuli Barcohen, 09 Jun 2004: X-Git-Tag: LABEL_2006_03_12_0025~544 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=2d24a3a787c2376c2c2c86a511eee78ef170923f;p=u-boot * Patch by Yuli Barcohen, 09 Jun 2004: Add support for Analogue&Micro Adder87x and the older AdderII board. * Patch by Ming-Len Wu, 09 Jun 2004: Add suppport for MC9328 (Dargonball) CPU and Motorola MX1ADS board --- diff --git a/CHANGELOG b/CHANGELOG index a74b79dffb..aa5893ddb2 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,12 @@ Changes since U-Boot 1.1.1: ====================================================================== +* Patch by Yuli Barcohen, 09 Jun 2004: + Add support for Analogue&Micro Adder87x and the older AdderII board. + +* Patch by Ming-Len Wu, 09 Jun 2004: + Add suppport for MC9328 (Dargonball) CPU and Motorola MX1ADS board + * Patch by Sam Song, 09 Jun 2004: - Add support for RPXlite_DW board - Update FLASH driver for 4*AM29DL323DB90VI diff --git a/CREDITS b/CREDITS index b077a29547..8f0057c09d 100644 --- a/CREDITS +++ b/CREDITS @@ -39,6 +39,7 @@ E: yuli@arabellasw.com D: Unified support for Motorola MPC826xADS/MPC8272ADS/PQ2FADS boards. D: Support for Zephyr Engineering ZPC.1900 board. D: Support for Interphase iSPAN boards. +D: Support for Analogue&Micro Adder boards. W: http://www.arabellasw.com N: Jerry van Baren @@ -307,6 +308,10 @@ N: Erwin Rol E: erwin@muffin.org D: boot support for RTEMS +N: Paul Ruhland +E: pruhland@rochester.rr.com +D: Port to Logic Zoom LH7A40x SDK board(s) + N: Neil Russell E: caret@c-side.com D: Author of LiMon-1.4.2, which contributed some ideas @@ -347,13 +352,22 @@ N: David Updegraff E: dave@cray.com D: Port to Cray L1 board; DHCP vendor extensions +N: Christian Vejlbo +E: christian.vejlbo@tellabs.com +D: FADS860T ethernet support + N: Martin Winistoerfer E: martinwinistoerfer@gmx.ch D: Port to MPC555/556 microcontrollers and support for cmi board -N: Christian Vejlbo -E: christian.vejlbo@tellabs.com -D: FADS860T ethernet support +N: Ming-Len Wu +E: minglen_wu@techware.com.tw +D: Motorola MX1ADS board support +W: http://www.techware.com.tw/ + +N: Xianghua Xiao +E: x.xiao@motorola.com +D: Support for Motorola 85xx(PowerQUICC III) chip, MPC8540ADS and MPC8560ADS boards. N: John Zhan E: zhanz@sinovee.com @@ -363,11 +377,3 @@ N: Alex Zuepke E: azu@sysgo.de D: Overall improvements on StrongARM, ARM720TDMI; Support for Tuxscreen; initial PCMCIA support for ARM W: www.elinos.com - -N: Xianghua Xiao -E: x.xiao@motorola.com -D: Support for Motorola 85xx(PowerQUICC III) chip, MPC8540ADS and MPC8560ADS boards. - -N: Paul Ruhland -E: pruhland@rochester.rr.com -D: Port to Logic Zoom LH7A40x SDK board(s) diff --git a/MAINTAINERS b/MAINTAINERS index 58d99b80e1..4c8bb2a9cf 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -27,6 +27,7 @@ Pantelis Antoniou Yuli Barcohen + Adder MPC87x/MPC852T ISPAN MPC8260 MPC8260ADS MPC826x/MPC827x/MPC8280 ZPC1900 MPC8265 diff --git a/MAKEALL b/MAKEALL index 4d9b900504..d2fe82e103 100644 --- a/MAKEALL +++ b/MAKEALL @@ -33,6 +33,7 @@ LIST_5xxx=" \ ######################################################################### LIST_8xx=" \ + Adder GENIETV MBX860T RBC823 \ AdderII GTH MHPC rmu \ ADS860 hermes MPC86xADS RPXClassic \ AMX860 IAD210 MPC885ADS RPXlite \ @@ -49,7 +50,6 @@ LIST_8xx=" \ FPS850L LANTEC QS850 TQM855L \ GEN860T lwmon QS860T TQM860L \ GEN860T_SC MBX R360MPI v37 \ - GENIETV MBX860T RBC823 \ " ######################################################################### @@ -139,10 +139,10 @@ LIST_ARM7="B2 ep7312 impa7" LIST_ARM9=" \ at91rm9200dk integratorcp integratorap \ - lpd7a400 omap1510inn omap1610h2 \ - omap1610inn omap730p2 smdk2400 \ - smdk2410 trab VCMA9 \ - versatile \ + lpd7a400 mx1ads omap1510inn \ + omap1610h2 omap1610inn omap730p2 \ + smdk2400 smdk2410 trab \ + VCMA9 versatile \ " ######################################################################### diff --git a/Makefile b/Makefile index 32bd06b952..457832ef96 100644 --- a/Makefile +++ b/Makefile @@ -262,6 +262,14 @@ PM520_config: unconfig ## MPC8xx Systems ######################################################################### +Adder_config \ +Adder87x_config \ +Adder852_config \ + : unconfig + $(if $(findstring 852,$@), \ + @echo "#define CONFIG_MPC852T" > include/config.h) + @./mkconfig -a Adder ppc mpc8xx adder + AdderII_config: unconfig @./mkconfig $(@:_config=) ppc mpc8xx adderII @@ -1048,17 +1056,14 @@ xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$ xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1))) -SX1_config : unconfig - @./mkconfig $(@:_config=) arm arm925t sx1 - integratorcp_config : unconfig @./mkconfig $(@:_config=) arm arm926ejs integratorcp integratorap_config : unconfig @./mkconfig $(@:_config=) arm arm926ejs integratorap -versatile_config : unconfig - @./mkconfig $(@:_config=) arm arm926ejs versatile +lpd7a400_config: unconfig + @./mkconfig $(@:_config=) arm lh7a40x lpd7a40x omap1510inn_config : unconfig @./mkconfig $(@:_config=) arm arm925t omap1510inn @@ -1104,6 +1109,12 @@ smdk2400_config : unconfig smdk2410_config : unconfig @./mkconfig $(@:_config=) arm arm920t smdk2410 +SX1_config : unconfig + @./mkconfig $(@:_config=) arm arm925t sx1 + +mx1ads_config : unconfig + @./mkconfig $(@:_config=) arm mc9328 mx1ads + # TRAB default configuration: 8 MB Flash, 32 MB RAM trab_config \ trab_bigram_config \ @@ -1132,8 +1143,8 @@ trab_old_config: unconfig VCMA9_config : unconfig @./mkconfig $(@:_config=) arm arm920t vcma9 mpl -lpd7a400_config: unconfig - @./mkconfig $(@:_config=) arm lh7a40x lpd7a40x +versatile_config : unconfig + @./mkconfig $(@:_config=) arm arm926ejs versatile ######################################################################### ## S3C44B0 Systems @@ -1143,15 +1154,22 @@ B2_config : unconfig @./mkconfig $(@:_config=) arm s3c44b0 B2 dave ######################################################################### -## ARM720T Systems +## MC9328 (Dragonball) Systems ######################################################################### -impa7_config : unconfig - @./mkconfig $(@:_config=) arm arm720t impa7 +mx1ads_config : unconfig + @./mkconfig $(@:_config=) arm mc9328 mx1ads + +######################################################################### +## ARM720T Systems +######################################################################### ep7312_config : unconfig @./mkconfig $(@:_config=) arm arm720t ep7312 +impa7_config : unconfig + @./mkconfig $(@:_config=) arm arm720t impa7 + modnet50_config : unconfig @./mkconfig $(@:_config=) arm arm720t modnet50 diff --git a/board/adder/Makefile b/board/adder/Makefile new file mode 100644 index 0000000000..9123a8026d --- /dev/null +++ b/board/adder/Makefile @@ -0,0 +1,46 @@ +# +# Copyright (C) 2004 Arabella Software Ltd. +# Yuli Barcohen +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := $(BOARD).o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/board/adder/adder.c b/board/adder/adder.c new file mode 100644 index 0000000000..cab6e2f66a --- /dev/null +++ b/board/adder/adder.c @@ -0,0 +1,107 @@ +/* + * Copyright (C) 2004 Arabella Software Ltd. + * Yuli Barcohen + * + * Support for Analogue&Micro Adder boards family. + * Tested on AdderII and Adder87x. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +/* + * SDRAM is single Samsung K4S643232F-T70 chip. + * Minimal CPU frequency is 40MHz. + */ +static uint sdram_table[] = { + /* Single read (offset 0x00 in UPM RAM) */ + 0x1f07fc24, 0xe0aefc04, 0x10adfc04, 0xe0bbbc00, + 0x10f77c44, 0xf3fffc07, 0xfffffc04, 0xfffffc04, + + /* Burst read (offset 0x08 in UPM RAM) */ + 0x1f07fc24, 0xe0aefc04, 0x10adfc04, 0xf0affc00, + 0xf0affc00, 0xf0affc00, 0xf0affc00, 0x10a77c44, + 0xf7bffc47, 0xfffffc35, 0xfffffc34, 0xfffffc35, + 0xfffffc35, 0x1ff77c35, 0xfffffc34, 0x1fb57c35, + + /* Single write (offset 0x18 in UPM RAM) */ + 0x1f27fc24, 0xe0aebc04, 0x00b93c00, 0x13f77c47, + 0xfffdfc04, 0xfffffc04, 0xfffffc04, 0xfffffc04, + + /* Burst write (offset 0x20 in UPM RAM) */ + 0x1f07fc24, 0xeeaebc00, 0x10ad7c00, 0xf0affc00, + 0xf0affc00, 0xe0abbc00, 0x1fb77c47, 0xfffffc04, + 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04, + 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04, + + /* Refresh (offset 0x30 in UPM RAM) */ + 0x1ff5fca4, 0xfffffc04, 0xfffffc04, 0xfffffc04, + 0xfffffc84, 0xfffffc07, 0xfffffc04, 0xfffffc04, + 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04, + + /* Exception (offset 0x3C in UPM RAM) */ + 0xfffffc27, 0xfffffc04, 0xfffffc04, 0xfffffc04 +}; + +long int initdram (int board_type) +{ + long int msize = CFG_SDRAM_SIZE; + volatile immap_t *immap = (volatile immap_t *)CFG_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; + + upmconfig(UPMA, sdram_table, sizeof(sdram_table) / sizeof(uint)); + + /* Configure SDRAM refresh */ + memctl->memc_mptpr = MPTPR_PTP_DIV32; /* BRGCLK/32 */ + + memctl->memc_mamr = (94 << 24) | CFG_MAMR; + memctl->memc_mar = 0x0; + udelay(200); + + /* Run precharge from location 0x15 */ + memctl->memc_mcr = 0x80002115; + udelay(200); + + /* Run 8 refresh cycles */ + memctl->memc_mcr = 0x80002830; + udelay(200); + + memctl->memc_mar = 0x88; + udelay(200); + + /* Run MRS pattern from location 0x16 */ + memctl->memc_mcr = 0x80002116; + udelay(200); + + return msize; +} + +int checkboard( void ) +{ + puts("Board: Adder"); +#if defined(CONFIG_MPC885_FAMILY) + puts("87x\n"); +#elif defined(CONFIG_MPC866_FAMILY) + puts("II\n"); +#endif + + return 0; +} diff --git a/board/adder/config.mk b/board/adder/config.mk new file mode 100644 index 0000000000..4691a69ef1 --- /dev/null +++ b/board/adder/config.mk @@ -0,0 +1,27 @@ +# +# Copyright (C) 2004 Arabella Software Ltd. +# Yuli Barcohen +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# Analogue&Micro Adder boards family +# +TEXT_BASE = 0xFE000000 diff --git a/board/adder/u-boot.lds b/board/adder/u-boot.lds new file mode 100644 index 0000000000..1d2a7d764b --- /dev/null +++ b/board/adder/u-boot.lds @@ -0,0 +1,122 @@ +/* + * (C) Copyright 2001-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Modified by Yuli Barcohen + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/mpc8xx/start.o (.text) + *(.text) + *(.fixup) + *(.got1) + . = ALIGN(16); + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x0FFF) & 0xFFFFF000; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(4096); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(4096); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} +ENTRY(_start) diff --git a/board/mx1ads/Makefile b/board/mx1ads/Makefile new file mode 100644 index 0000000000..8a17702d0b --- /dev/null +++ b/board/mx1ads/Makefile @@ -0,0 +1,50 @@ +#/* +#* board/mx1ads/Makefile +#* +#* (c) Copyright 2004 +#* Techware Information Technology, Inc. +#* http://www.techware.com.tw/ +#* +#* Ming-Len Wu +#* +#* This program is free software; you can redistribute it and/or +#* modify it under the terms of the GNU General Public License as +#* published by the Free Software Foundation; either version 2 of +#* the License, or (at your option) any later version. +#* +#* This program is distributed in the hope that it will be useful, +#* but WITHOUT ANY WARRANTY; without even the implied warranty of +#* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +#* GNU General Public License for more details. +#* +#* You should have received a copy of the GNU General Public License +#* along with this program; if not, write to the Free Software +#* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +#* MA 02111-1307 USA +#*/ + + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := mx1ads.o syncflash.o +SOBJS := memsetup.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/board/mx1ads/config.mk b/board/mx1ads/config.mk new file mode 100644 index 0000000000..16a0b84b2e --- /dev/null +++ b/board/mx1ads/config.mk @@ -0,0 +1,28 @@ +#/* +#* board/mx1ads/config.mk +#* +#* (c) Copyright 2004 +#* Techware Information Technology, Inc. +#* http://www.techware.com.tw/ +#* +#* Ming-Len Wu +#* +#* This program is free software; you can redistribute it and/or +#* modify it under the terms of the GNU General Public License as +#* published by the Free Software Foundation; either version 2 of +#* the License, or (at your option) any later version. +#* +#* This program is distributed in the hope that it will be useful, +#* but WITHOUT ANY WARRANTY; without even the implied warranty of +#* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +#* GNU General Public License for more details. +#* +#* You should have received a copy of the GNU General Public License +#* along with this program; if not, write to the Free Software +#* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +#* MA 02111-1307 USA +#*/ + + +TEXT_BASE = 0x08400000 + diff --git a/board/mx1ads/memsetup.S b/board/mx1ads/memsetup.S new file mode 100644 index 0000000000..39b71fefe4 --- /dev/null +++ b/board/mx1ads/memsetup.S @@ -0,0 +1,82 @@ +/* + * board/mx1ads/memsetup.S + * + * (c) Copyright 2004 + * Techware Information Technology, Inc. + * http://www.techware.com.tw/ + * + * Ming-Len Wu + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#define SDCTL0 0x221000 +#define SDCTL1 0x221004 + + +_TEXT_BASE: + .word TEXT_BASE + +.globl memsetup +memsetup: +/* memory controller init */ + + ldr r1, =SDCTL0 + +/* Set Precharge Command */ + + ldr r3, =0x92120200 +/* ldr r3, =0x92120251 +*/ + str r3, [r1] + +/* Issue Precharge All Commad */ + ldr r3, =0x8200000 + ldr r2, [r3] + +/* Set AutoRefresh Command */ + ldr r3, =0xA2120200 + str r3, [r1] + +/* Issue AutoRefresh Command */ + ldr r3, =0x8000000 + ldr r2, [r3] + ldr r2, [r3] + ldr r2, [r3] + ldr r2, [r3] + ldr r2, [r3] + ldr r2, [r3] + ldr r2, [r3] + ldr r2, [r3] + +/* Set Mode Register */ + ldr r3, =0xB2120200 + str r3, [r1] + +/* Issue Mode Register Command */ + ldr r3, =0x08111800 /* Mode Register Value */ + ldr r2, [r3] + +/* Set Normal Mode */ + ldr r3, =0x82124200 + str r3, [r1] + +/* everything is fine now */ + mov pc, lr + diff --git a/board/mx1ads/mx1ads.c b/board/mx1ads/mx1ads.c new file mode 100644 index 0000000000..567f88a7b2 --- /dev/null +++ b/board/mx1ads/mx1ads.c @@ -0,0 +1,183 @@ +/* + * board/mx1ads/mx1ads.c + * + * (c) Copyright 2004 + * Techware Information Technology, Inc. + * http://www.techware.com.tw/ + * + * Ming-Len Wu + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include +#include + +/* ------------------------------------------------------------------------- */ + +#define FCLK_SPEED 1 + +#if FCLK_SPEED==0 /* Fout = 203MHz, Fin = 12MHz for Audio */ +#define M_MDIV 0xC3 +#define M_PDIV 0x4 +#define M_SDIV 0x1 +#elif FCLK_SPEED==1 /* Fout = 202.8MHz */ +#define M_MDIV 0xA1 +#define M_PDIV 0x3 +#define M_SDIV 0x1 +#endif + +#define USB_CLOCK 1 + +#if USB_CLOCK==0 +#define U_M_MDIV 0xA1 +#define U_M_PDIV 0x3 +#define U_M_SDIV 0x1 +#elif USB_CLOCK==1 +#define U_M_MDIV 0x48 +#define U_M_PDIV 0x3 +#define U_M_SDIV 0x2 +#endif + +#if 0 + +static inline void delay (unsigned long loops) { + __asm__ volatile ("1:\n" + "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0" (loops)); +} + +#endif + +/* + * Miscellaneous platform dependent initialisations + */ + + +void SetAsynchMode(void) { + __asm__ ( + "mrc p15,0,r0,c1,c0,0 \n" + "mov r2, #0xC0000000 \n" + "orr r0,r2,r0 \n" + "mcr p15,0,r0,c1,c0,0 \n" + ); +} + +static u32 mc9328sid; + +int board_init (void) { + + DECLARE_GLOBAL_DATA_PTR; + + volatile unsigned int tmp; + + mc9328sid = MX1_SIDR; + + MX1_GPCR = 0x000003AB; /* I/O pad driving strength */ + +/* MX1_CS1U = 0x00000A00; */ /* SRAM initialization */ +/* MX1_CS1L = 0x11110601; */ + + + MX1_MPCTL0 = 0x04632410; /* setting for 150 MHz MCU PLL CLK */ + +/* MX1_MPCTL0 = 0x003f1437; *//* setting for 192 MHz MCU PLL CLK */ + + + +/* set FCLK divider 1 (i.e. FCLK to MCU PLL CLK) and + * BCLK divider to 2 (i.e. BCLK to 48 MHz) + */ + MX1_CSCR = 0xAF000403; + + MX1_CSCR |= 0x00200000; /* Trigger the restart bit(bit 21) */ + MX1_CSCR &= 0xFFFF7FFF; /* Program PRESC bit(bit 15) to 0 to divide-by-1 */ + +/* setup cs4 for cs8900 ethernet */ + + MX1_CS4U = 0x00000F00; /* Initialize CS4 for CS8900 ethernet */ + MX1_CS4L = 0x00001501; + + MX1_GIUS_A &= 0xFF3FFFFF; + MX1_GPR_A &= 0xFF3FFFFF; + + tmp = *(unsigned int *)(0x1500000C); + tmp = *(unsigned int *)(0x1500000C); + +/* setup timer 1 as system timer */ + + MX1_TPRER1 = 0x1f; /* divide by 32 */ + MX1_TCTL1 = 0x19; /* clock in from 32k Osc. */ + + + SetAsynchMode(); + + gd->bd->bi_arch_number = 160; /* Arch number of MX1ADS Board */ + + gd->bd->bi_boot_params = 0x08000100; /* adress of boot parameters */ + + icache_enable(); + dcache_enable(); + +/* set PERCLKs */ + MX1_PCDR = 0x00000055; /* set PERCLKS */ + +/* PERCLK3 is only used by SSI so the SSI driver can set it any value it likes + * PERCLK1 and PERCLK2 are shared so DO NOT change it in any other place + * all sources selected as normal interrupt + */ + MX1_INTTYPEH = 0; + MX1_INTTYPEL = 0; + + return 0; +} + + +int board_late_init(void) { + + setenv("stdout", "serial"); + setenv("stderr", "serial"); + + switch (mc9328sid) { + case 0x0005901d : + printf ("MX1ADS board with MC9328 MX1 (0L44N), Silicon ID 0x%08x \n\n",mc9328sid); + break; + case 0x04d4c01d : + printf ("MX1ADS board with MC9328 MXL (1L45N), Silicon ID 0x%08x \n\n",mc9328sid); + break; + case 0x00d4c01d : + printf ("MX1ADS board with MC9328 MXL (2L45N), Silicon ID 0x%08x \n\n",mc9328sid); + break; + + default : + printf ("MX1ADS board with UNKNOWN MC9328 cpu, Silicon ID 0x%08x \n",mc9328sid); + break; + + } + + return 0; +} + + +int dram_init (void) { + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return 0; +} diff --git a/board/mx1ads/syncflash.c b/board/mx1ads/syncflash.c new file mode 100644 index 0000000000..afbe78653d --- /dev/null +++ b/board/mx1ads/syncflash.c @@ -0,0 +1,334 @@ +/* + * board/mx1ads/syncflash.c + * + * (c) Copyright 2004 + * Techware Information Technology, Inc. + * http://www.techware.com.tw/ + * + * Ming-Len Wu + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +typedef unsigned long * p_u32; + +/* 4Mx16x2 IAM=0 CSD1 */ + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ + +/* Following Setting is for CSD1 */ +#define SFCTL 0x00221004 +#define reg_SFCTL __REG(SFCTL) + +#define SYNCFLASH_A10 (0x00100000) + +#define CMD_NORMAL (0x81020300) /* Normal Mode */ +#define CMD_PREC (CMD_NORMAL + 0x10000000) /* Precharge Command */ +#define CMD_AUTO (CMD_NORMAL + 0x20000000) /* Auto Refresh Command */ +#define CMD_LMR (CMD_NORMAL + 0x30000000) /* Load Mode Register Command */ +#define CMD_LCR (CMD_NORMAL + 0x60000000) /* LCR Command */ +#define CMD_PROGRAM (CMD_NORMAL + 0x70000000) + +#define MODE_REG_VAL (CFG_FLASH_BASE+0x0008CC00) /* Cas Latency 3 */ + +/* LCR Command */ +#define LCR_READSTATUS (0x0001C000) /* 0x70 */ +#define LCR_ERASE_CONFIRM (0x00008000) /* 0x20 */ +#define LCR_ERASE_NVMODE (0x0000C000) /* 0x30 */ +#define LCR_PROG_NVMODE (0x00028000) /* 0xA0 */ +#define LCR_SR_CLEAR (0x00014000) /* 0x50 */ + + +/* Get Status register */ +u32 SF_SR(void) { + u32 tmp,tmp1; + + reg_SFCTL = CMD_PROGRAM; + tmp = __REG(CFG_FLASH_BASE); + + reg_SFCTL = CMD_NORMAL; + + reg_SFCTL = CMD_LCR; /* Activate LCR Mode */ + tmp1 = __REG(CFG_FLASH_BASE + LCR_SR_CLEAR); + + return tmp; +} + +/* check if SyncFlash is ready */ +u8 SF_Ready(void) { + u32 tmp; + + tmp = SF_SR(); + + if ((tmp & 0x00800000) && (tmp & 0x001C0000)) { + printf ("SyncFlash Error code %08x\n",tmp); + }; + + if ((tmp & 0x00000080) && (tmp & 0x0000001C)) { + printf ("SyncFlash Error code %08x\n",tmp); + + }; + + if (tmp == 0x00800080) /* Test Bit 7 of SR */ + return 1; + else + return 0; +} + +/* Issue the precharge all command */ +void SF_PrechargeAll(void) { + + u32 tmp; + + reg_SFCTL = CMD_PREC; /* Set Precharge Command */ + tmp = __REG(CFG_FLASH_BASE + SYNCFLASH_A10); /* Issue Precharge All Command */ + +} + +/* set SyncFlash to normal mode */ +void SF_Normal(void) { + + SF_PrechargeAll(); + + reg_SFCTL = CMD_NORMAL; +} + +/* Erase SyncFlash */ +void SF_Erase(u32 RowAddress) { + u32 tmp; + + reg_SFCTL = CMD_NORMAL; + tmp = __REG(RowAddress); + + reg_SFCTL = CMD_PREC; + tmp = __REG(RowAddress); + + reg_SFCTL = CMD_LCR; /* Set LCR mode */ + __REG(RowAddress + LCR_ERASE_CONFIRM) = 0; /* Issue Erase Setup Command */ + + reg_SFCTL = CMD_NORMAL; /* return to Normal mode */ + __REG(RowAddress) = 0xD0D0D0D0; /* Confirm */ + + while(!SF_Ready()); +} + + +void SF_NvmodeErase(void) { + SF_PrechargeAll(); + + reg_SFCTL = CMD_LCR; /* Set to LCR mode */ + __REG(CFG_FLASH_BASE + LCR_ERASE_NVMODE) = 0; /* Issue Erase Nvmode Reg Command */ + + reg_SFCTL = CMD_NORMAL; /* Return to Normal mode */ + __REG(CFG_FLASH_BASE + LCR_ERASE_NVMODE) = 0xC0C0C0C0; /* Confirm */ + + while(!SF_Ready()); +} + +void SF_NvmodeWrite(void) { + SF_PrechargeAll(); + + reg_SFCTL = CMD_LCR; /* Set to LCR mode */ + __REG(CFG_FLASH_BASE+LCR_PROG_NVMODE) = 0; /* Issue Program Nvmode reg command */ + + reg_SFCTL = CMD_NORMAL; /* Return to Normal mode */ + __REG(CFG_FLASH_BASE+LCR_PROG_NVMODE) = 0xC0C0C0C0; /* Confirm not needed */ + +} + + +/****************************************************************************************/ + +ulong flash_init(void) { + int i, j; + u32 tmp; + +/* Turn on CSD1 for negating RESETSF of SyncFLash */ + + reg_SFCTL |= 0x80000000; /* enable CSD1 for SyncFlash */ + udelay(200); + + reg_SFCTL = CMD_LMR; /* Set Load Mode Register Command */ + tmp = __REG(MODE_REG_VAL); /* Issue Load Mode Register Command */ + + SF_Normal(); + + i = 0; + + flash_info[i].flash_id = FLASH_MAN_MT | FLASH_MT28S4M16LC; + + flash_info[i].size = FLASH_BANK_SIZE; + flash_info[i].sector_count = CFG_MAX_FLASH_SECT; + + memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); + + for (j = 0; j < flash_info[i].sector_count; j++) { + flash_info[i].start[j] = CFG_FLASH_BASE + j * 0x00100000; + } + + flash_protect(FLAG_PROTECT_SET, + CFG_FLASH_BASE, + CFG_FLASH_BASE + monitor_flash_len - 1, + &flash_info[0]); + + flash_protect(FLAG_PROTECT_SET, + CFG_ENV_ADDR, + CFG_ENV_ADDR + CFG_ENV_SIZE - 1, + &flash_info[0]); + + return FLASH_BANK_SIZE; +} + + +void flash_print_info (flash_info_t *info) { + + int i; + + switch (info->flash_id & FLASH_VENDMASK) { + case (FLASH_MAN_MT & FLASH_VENDMASK): + printf("Micron: "); + break; + default: + printf("Unknown Vendor "); + break; + } + + + switch (info->flash_id & FLASH_TYPEMASK) { + case (FLASH_MT28S4M16LC & FLASH_TYPEMASK): + printf("2x FLASH_MT28S4M16LC (16MB Total)\n"); + break; + default: + printf("Unknown Chip Type\n"); + return; + break; + } + + printf(" Size: %ld MB in %d Sectors\n", + info->size >> 20, info->sector_count); + + printf(" Sector Start Addresses: "); + + for (i = 0; i < info->sector_count; i++) { + if ((i % 5) == 0) + printf ("\n "); + + printf (" %08lX%s", info->start[i], + info->protect[i] ? " (RO)" : " "); + } + + printf ("\n"); +} + + +/*-----------------------------------------------------------------------*/ + +int flash_erase (flash_info_t *info, int s_first, int s_last) { + int iflag, cflag, prot, sect; + int rc = ERR_OK; + +/* first look for protection bits */ + + if (info->flash_id == FLASH_UNKNOWN) + return ERR_UNKNOWN_FLASH_TYPE; + + if ((s_first < 0) || (s_first > s_last)) + return ERR_INVAL; + + if ((info->flash_id & FLASH_VENDMASK) != (FLASH_MAN_MT & FLASH_VENDMASK)) + return ERR_UNKNOWN_FLASH_VENDOR; + + prot = 0; + + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) + prot++; + } + + if (prot) { + printf("protected!\n"); + return ERR_PROTECTED; + } +/* + * Disable interrupts which might cause a timeout + * here. Remember that our exception vectors are + * at address 0 in the flash, and we don't want a + * (ticker) exception to happen while the flash + * chip is in programming mode. + */ + + cflag = icache_status(); + icache_disable(); + iflag = disable_interrupts(); + +/* Start erase on unprotected sectors */ + for (sect = s_first; sect <= s_last && !ctrlc(); sect++) { + + printf("Erasing sector %2d ... ", sect); + +/* arm simple, non interrupt dependent timer */ + + reset_timer_masked(); + + SF_NvmodeErase(); + SF_NvmodeWrite(); + + SF_Erase(CFG_FLASH_BASE + (0x0100000 * sect)); + SF_Normal(); + + printf("ok.\n"); + } + + if (ctrlc()) + printf("User Interrupt!\n"); + + if (iflag) + enable_interrupts(); + + if (cflag) + icache_enable(); + + return rc; +} + + + +/*----------------------------------------------------------------------- + * Copy memory to flash. + */ + +int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) { + int i; + + for(i = 0; i < cnt; i += 4) { + + SF_PrechargeAll(); + + reg_SFCTL = CMD_PROGRAM; /* Enter SyncFlash Program mode */ + __REG(addr + i) = __REG((u32)src + i); + + while(!SF_Ready()); + } + + SF_Normal(); + + return ERR_OK; +} + + diff --git a/board/mx1ads/u-boot.lds b/board/mx1ads/u-boot.lds new file mode 100644 index 0000000000..946994d507 --- /dev/null +++ b/board/mx1ads/u-boot.lds @@ -0,0 +1,58 @@ +/* + * board/mx1ads/u-boot.lds + * + * (c) Copyright 2004 + * Techware Information Technology, Inc. + * http://www.techware.com.tw/ + * + * Ming-Len Wu + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/mc9328/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/cpu/mc9328/Makefile b/cpu/mc9328/Makefile new file mode 100644 index 0000000000..0261ba6e7b --- /dev/null +++ b/cpu/mc9328/Makefile @@ -0,0 +1,43 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(CPU).a + +START = start.o +OBJS = serial.o interrupts.o cpu.o + +all: .depend $(START) $(LIB) + +$(LIB): $(OBJS) + $(AR) crv $@ $(OBJS) + +######################################################################### + +.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/cpu/mc9328/config.mk b/cpu/mc9328/config.mk new file mode 100644 index 0000000000..cef7d26f1c --- /dev/null +++ b/cpu/mc9328/config.mk @@ -0,0 +1,27 @@ +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \ + -mshort-load-bytes -msoft-float + +PLATFORM_CPPFLAGS += -mapcs-32 -march=armv4 diff --git a/cpu/mc9328/cpu.c b/cpu/mc9328/cpu.c new file mode 100644 index 0000000000..2a2b578017 --- /dev/null +++ b/cpu/mc9328/cpu.c @@ -0,0 +1,183 @@ +/* + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Marius Groeger + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * CPU specific code + */ + +#include +#include +#include + +/* read co-processor 15, register #1 (control register) */ +static unsigned long read_p15_c1 (void) +{ + unsigned long value; + + __asm__ __volatile__( + "mrc p15, 0, %0, c1, c0, 0 @ read control reg\n" + : "=r" (value) + : + : "memory"); + +#ifdef MMU_DEBUG + printf ("p15/c1 is = %08lx\n", value); +#endif + return value; +} + +/* write to co-processor 15, register #1 (control register) */ +static void write_p15_c1 (unsigned long value) +{ +#ifdef MMU_DEBUG + printf ("write %08lx to p15/c1\n", value); +#endif + __asm__ __volatile__( + "mcr p15, 0, %0, c1, c0, 0 @ write it back\n" + : + : "r" (value) + : "memory"); + + read_p15_c1 (); +} + +static void cp_delay (void) +{ + volatile int i; + + /* copro seems to need some delay between reading and writing */ + for (i = 0; i < 100; i++); +} + +/* See also ARM Ref. Man. */ +#define C1_MMU (1<<0) /* mmu off/on */ +#define C1_ALIGN (1<<1) /* alignment faults off/on */ +#define C1_DC (1<<2) /* dcache off/on */ +#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */ +#define C1_SYS_PROT (1<<8) /* system protection */ +#define C1_ROM_PROT (1<<9) /* ROM protection */ +#define C1_IC (1<<12) /* icache off/on */ +#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */ +#define RESERVED_1 (0xf << 3) /* must be 111b for R/W */ + +int cpu_init (void) +{ + /* + * setup up stacks if necessary + */ +#ifdef CONFIG_USE_IRQ + DECLARE_GLOBAL_DATA_PTR; + + IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4; + FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ; +#endif + return 0; +} + +int cleanup_before_linux (void) +{ + /* + * this function is called just before we call linux + * it prepares the processor for linux + * + * we turn off caches etc ... + */ + + unsigned long i; + + disable_interrupts (); + + /* turn off I/D-cache */ + asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i)); + i &= ~(C1_DC | C1_IC); + asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i)); + + /* flush I/D-cache */ + i = 0; + asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i)); + return (0); +} + +int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + extern void reset_cpu (ulong addr); + + disable_interrupts (); + reset_cpu (0); + /*NOTREACHED*/ + return (0); +} + +void icache_enable (void) +{ + ulong reg; + + reg = read_p15_c1 (); + cp_delay (); + write_p15_c1 (reg | C1_IC); +} + +void icache_disable (void) +{ + ulong reg; + + reg = read_p15_c1 (); + cp_delay (); + write_p15_c1 (reg & ~C1_IC); +} + +int icache_status (void) +{ + return (read_p15_c1 () & C1_IC) != 0; +} + +#ifdef USE_920T_MMU +/* It makes no sense to use the dcache if the MMU is not enabled */ +void dcache_enable (void) +{ + ulong reg; + + reg = read_p15_c1 (); + cp_delay (); + write_p15_c1 (reg | C1_DC); +} + +void dcache_disable (void) +{ + ulong reg; + + reg = read_p15_c1 (); + cp_delay (); + reg &= ~C1_DC; + write_p15_c1 (reg); +} + +int dcache_status (void) +{ + return (read_p15_c1 () & C1_DC) != 0; +} +#endif diff --git a/cpu/mc9328/interrupts.c b/cpu/mc9328/interrupts.c new file mode 100644 index 0000000000..3a922cfc4f --- /dev/null +++ b/cpu/mc9328/interrupts.c @@ -0,0 +1,250 @@ +/* + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Marius Groeger + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Alex Zuepke + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include + +extern void reset_cpu(ulong addr); +int timer_load_val = 0; + +#ifdef CONFIG_USE_IRQ +/* enable IRQ interrupts */ +void enable_interrupts (void) +{ + unsigned long temp; + __asm__ __volatile__("mrs %0, cpsr\n" + "bic %0, %0, #0x80\n" + "msr cpsr_c, %0" + : "=r" (temp) + : + : "memory"); +} + + +/* + * disable IRQ/FIQ interrupts + * returns true if interrupts had been enabled before we disabled them + */ +int disable_interrupts (void) +{ + unsigned long old,temp; + __asm__ __volatile__("mrs %0, cpsr\n" + "orr %1, %0, #0xc0\n" + "msr cpsr_c, %1" + : "=r" (old), "=r" (temp) + : + : "memory"); + return (old & 0x80) == 0; +} +#else +void enable_interrupts (void) +{ + return; +} +int disable_interrupts (void) +{ + return 0; +} +#endif + + +void bad_mode (void) +{ + panic ("Resetting CPU ...\n"); + reset_cpu (0); +} + +void show_regs (struct pt_regs *regs) +{ + unsigned long flags; + const char *processor_modes[] = { + "USER_26", "FIQ_26", "IRQ_26", "SVC_26", + "UK4_26", "UK5_26", "UK6_26", "UK7_26", + "UK8_26", "UK9_26", "UK10_26", "UK11_26", + "UK12_26", "UK13_26", "UK14_26", "UK15_26", + "USER_32", "FIQ_32", "IRQ_32", "SVC_32", + "UK4_32", "UK5_32", "UK6_32", "ABT_32", + "UK8_32", "UK9_32", "UK10_32", "UND_32", + "UK12_32", "UK13_32", "UK14_32", "SYS_32", + }; + + flags = condition_codes (regs); + + printf ("pc : [<%08lx>] lr : [<%08lx>]\n" + "sp : %08lx ip : %08lx fp : %08lx\n", + instruction_pointer (regs), + regs->ARM_lr, regs->ARM_sp, regs->ARM_ip, regs->ARM_fp); + printf ("r10: %08lx r9 : %08lx r8 : %08lx\n", + regs->ARM_r10, regs->ARM_r9, regs->ARM_r8); + printf ("r7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n", + regs->ARM_r7, regs->ARM_r6, regs->ARM_r5, regs->ARM_r4); + printf ("r3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n", + regs->ARM_r3, regs->ARM_r2, regs->ARM_r1, regs->ARM_r0); + printf ("Flags: %c%c%c%c", + flags & CC_N_BIT ? 'N' : 'n', + flags & CC_Z_BIT ? 'Z' : 'z', + flags & CC_C_BIT ? 'C' : 'c', flags & CC_V_BIT ? 'V' : 'v'); + printf (" IRQs %s FIQs %s Mode %s%s\n", + interrupts_enabled (regs) ? "on" : "off", + fast_interrupts_enabled (regs) ? "on" : "off", + processor_modes[processor_mode (regs)], + thumb_mode (regs) ? " (T)" : ""); +} + +void do_undefined_instruction (struct pt_regs *pt_regs) +{ + printf ("undefined instruction\n"); + show_regs (pt_regs); + bad_mode (); +} + +void do_software_interrupt (struct pt_regs *pt_regs) +{ + printf ("software interrupt\n"); + show_regs (pt_regs); + bad_mode (); +} + +void do_prefetch_abort (struct pt_regs *pt_regs) +{ + printf ("prefetch abort\n"); + show_regs (pt_regs); + bad_mode (); +} + +void do_data_abort (struct pt_regs *pt_regs) +{ + printf ("data abort\n"); + show_regs (pt_regs); + bad_mode (); +} + +void do_not_used (struct pt_regs *pt_regs) +{ + printf ("not used\n"); + show_regs (pt_regs); + bad_mode (); +} + +void do_fiq (struct pt_regs *pt_regs) +{ + printf ("fast interrupt request\n"); + show_regs (pt_regs); + bad_mode (); +} + +void do_irq (struct pt_regs *pt_regs) +{ + printf ("interrupt request\n"); + show_regs (pt_regs); + bad_mode (); +} + + +int interrupt_init (void) +{ + +/* we don't use interrupt */ + return(0); +} + +/* + * timer without interrupts + */ + +void reset_timer (void) +{ + reset_timer_masked (); +} + +ulong get_timer (ulong base) +{ + return get_timer_masked (); +} + +void set_timer (ulong t) +{ +/* Nop */ +} + +void udelay (unsigned long usec) +{ + udelay_masked (usec); +} + +void reset_timer_masked (void) +{ + u32 tmp; + MX1_TCTL1 = 0x09; + tmp = 0x1f; /* a little delay for timer to reset */ + MX1_TPRER1 = 0x1f; + MX1_TCTL1 = 0x19; +} + +ulong get_timer_masked (void) +{ + return MX1_TCN1; +} + +void udelay_masked (unsigned long usec) +{ + ulong tmo; + + tmo = usec / 1000; + tmo *= CFG_HZ; + tmo /= 1000; + + reset_timer_masked (); + + while (get_timer_masked () < tmo); +} + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On ARM it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + return get_timer(0); +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ + +ulong get_tbclk (void) { + return CFG_HZ; +} + diff --git a/cpu/mc9328/serial.c b/cpu/mc9328/serial.c new file mode 100644 index 0000000000..45b6f8afd4 --- /dev/null +++ b/cpu/mc9328/serial.c @@ -0,0 +1,146 @@ +/* + * cpu/mc9328/serial.c + * + * (c) Copyright 2004 + * Techware Information Technology, Inc. + * http://www.techware.com.tw/ + * + * Ming-Len Wu + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include +#include + +#if defined(CONFIG_UART1) +/* GPIO PORT B */ + +#define reg_GIUS MX1_GIUS_C +#define reg_GPR MX1_GPR_B +#define GPIO_MASK 0xFFFFE1FF +#define UART_BASE 0x00206000 + + +#elif defined (CONFIG_UART2) +/* GPIO PORT C */ + +#define reg_GIUS MX1_GIUS_C +#define reg_GPR MX1_GPR_C +#define GPIO_MASK 0x0FFFFFFF +#define UART_BASE 0x207000 + +#endif + +#define reg_URXD (*((volatile u32 *)(UART_BASE+0x00))) +#define reg_UTXD (*((volatile u32 *)(UART_BASE+0x40))) +#define reg_UCR1 (*((volatile u32 *)(UART_BASE+0x80))) +#define reg_UCR2 (*((volatile u32 *)(UART_BASE+0x84))) +#define reg_UCR3 (*((volatile u32 *)(UART_BASE+0x88))) +#define reg_UCR4 (*((volatile u32 *)(UART_BASE+0x8C))) +#define reg_UFCR (*((volatile u32 *)(UART_BASE+0x90))) +#define reg_USR1 (*((volatile u32 *)(UART_BASE+0x94))) +#define reg_USR2 (*((volatile u32 *)(UART_BASE+0x98))) +#define reg_UESC (*((volatile u32 *)(UART_BASE+0x9C))) +#define reg_UTIM (*((volatile u32 *)(UART_BASE+0xA0))) +#define reg_UBIR (*((volatile u32 *)(UART_BASE+0xA4))) +#define reg_UBMR (*((volatile u32 *)(UART_BASE+0xA8))) +#define reg_UBRC (*((volatile u32 *)(UART_BASE+0xAC))) + +#define TXFE_MASK 0x4000 /* Tx buffer empty */ +#define RDR_MASK 0x0001 /* receive data ready */ + + +void serial_setbrg (void) { + +/* config I/O pins for UART */ + + reg_GIUS &= GPIO_MASK; + reg_GPR &= GPIO_MASK; + +/* config UART */ + + reg_UCR1 = 5; + reg_UCR2 = 0x4027; + reg_UCR4 = 1; + reg_UFCR = 0xA81; + + reg_UBIR = 0xF; + reg_UBMR = 0x8A; + reg_UBRC = 8; +} + + + +/* + * Initialise the serial port with the given baudrate. The settings + * are always 8 data bits, no parity, 1 stop bit, no start bits. + * + */ + +int serial_init (void) { + serial_setbrg (); + + return (0); +} + + + +/* + * Read a single byte from the serial port. Returns 1 on success, 0 + * otherwise. When the function is succesfull, the character read is + * written into its argument c. + */ +int serial_getc (void) { + + while (!(reg_USR2 & RDR_MASK)) ; /* wait until RDR bit set */ + + return (u8)reg_URXD; +} + + +/* + * Output a single byte to the serial port. + */ +void serial_putc (const char c) { + + while (!(reg_USR2 & TXFE_MASK)); /* wait until TXFE bit set */ + + reg_UTXD = (u16) c; + + if (c == '\n') { /* carriage return ? append line-feed */ + while (!(reg_USR2 & TXFE_MASK)); /* wait until TXFE bit set */ + reg_UTXD = '\r'; + } + +} + + +/* + * Test whether a character is in the RX buffer + */ +int serial_tstc (void) { + return reg_USR2 & RDR_MASK; +} + + +void serial_puts (const char *s) { + while (*s) { + serial_putc (*s++); + } +} + diff --git a/cpu/mc9328/start.S b/cpu/mc9328/start.S new file mode 100644 index 0000000000..edfce121b7 --- /dev/null +++ b/cpu/mc9328/start.S @@ -0,0 +1,388 @@ +/* + * armboot - Startup Code for ARM920 CPU-core + * + * Copyright (c) 2001 Marius Gröger + * Copyright (c) 2002 Alex Züpke + * Copyright (c) 2002 Gary Jennejohn + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include +#include + + +/* + ************************************************************************* + * + * Jump vector table as in table 3.1 in [1] + * + ************************************************************************* + */ + + +.globl _start +_start: b reset + ldr pc, _undefined_instruction + ldr pc, _software_interrupt + ldr pc, _prefetch_abort + ldr pc, _data_abort + ldr pc, _not_used + ldr pc, _irq + ldr pc, _fiq + +_undefined_instruction: .word undefined_instruction +_software_interrupt: .word software_interrupt +_prefetch_abort: .word prefetch_abort +_data_abort: .word data_abort +_not_used: .word not_used +_irq: .word irq +_fiq: .word fiq + + .balignl 16,0xdeadbeef + + +/* + ************************************************************************* + * + * Startup Code (reset vector) + * + * do important init only if we don't start from memory! + * relocate armboot to ram + * setup stack + * jump to second stage + * + ************************************************************************* + */ + +_TEXT_BASE: + .word TEXT_BASE + +.globl _armboot_start +_armboot_start: + .word _start + +/* + * These are defined in the board-specific linker script. + */ +.globl _bss_start +_bss_start: + .word __bss_start + +.globl _bss_end +_bss_end: + .word _end + +#ifdef CONFIG_USE_IRQ +/* IRQ stack memory (calculated at run-time) */ +.globl IRQ_STACK_START +IRQ_STACK_START: + .word 0x0badc0de + +/* IRQ stack memory (calculated at run-time) */ +.globl FIQ_STACK_START +FIQ_STACK_START: + .word 0x0badc0de +#endif + + +/* + * the actual reset code + */ + +reset: + /* + * set the cpu to SVC32 mode + */ + mrs r0,cpsr + bic r0,r0,#0x1f + orr r0,r0,#0xd3 + msr cpsr,r0 + + /* + * we do sys-critical inits only at reboot, + * not when booting from ram! + */ +#ifdef CONFIG_INIT_CRITICAL + bl cpu_init_crit +#endif + +relocate: /* relocate U-Boot to RAM */ + adr r0, _start /* r0 <- current position of code */ + ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ + cmp r0, r1 /* don't reloc during debug */ + beq stack_setup + + ldr r2, _armboot_start + ldr r3, _bss_start + sub r2, r3, r2 /* r2 <- size of armboot */ + add r2, r0, r2 /* r2 <- source end address */ + +copy_loop: + ldmia r0!, {r3-r10} /* copy from source address [r0] */ + stmia r1!, {r3-r10} /* copy to target address [r1] */ + cmp r0, r2 /* until source end addreee [r2] */ + ble copy_loop + + /* Set up the stack */ +stack_setup: + ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ + sub r0, r0, #CFG_MALLOC_LEN /* malloc area */ + sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */ +#ifdef CONFIG_USE_IRQ + sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) +#endif + sub sp, r0, #12 /* leave 3 words for abort-stack */ + +clear_bss: + ldr r0, _bss_start /* find start of bss segment */ + ldr r1, _bss_end /* stop here */ + mov r2, #0x00000000 /* clear */ + +clbss_l:str r2, [r0] /* clear loop... */ + add r0, r0, #4 + cmp r0, r1 + bne clbss_l + + ldr pc, _start_armboot + +_start_armboot: .word start_armboot + + +/* + ************************************************************************* + * + * CPU_init_critical registers + * + * setup important registers + * setup memory timing + * + ************************************************************************* + */ + + +cpu_init_crit: + /* + * flush v4 I/D caches + */ + mov r0, #0 + mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */ + mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */ + + /* + * disable MMU stuff and caches + */ + mrc p15, 0, r0, c1, c0, 0 + bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS) + bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM) + orr r0, r0, #0x00000002 @ set bit 2 (A) Align + orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache + mcr p15, 0, r0, c1, c0, 0 + + + /* + * before relocating, we have to setup RAM timing + * because memory timing is board-dependend, you will + * find a memsetup.S in your board directory. + */ + mov ip, lr + bl memsetup + mov lr, ip + + mov pc, lr + + +/* + ************************************************************************* + * + * Interrupt handling + * + ************************************************************************* + */ + +@ +@ IRQ stack frame. +@ +#define S_FRAME_SIZE 72 + +#define S_OLD_R0 68 +#define S_PSR 64 +#define S_PC 60 +#define S_LR 56 +#define S_SP 52 + +#define S_IP 48 +#define S_FP 44 +#define S_R10 40 +#define S_R9 36 +#define S_R8 32 +#define S_R7 28 +#define S_R6 24 +#define S_R5 20 +#define S_R4 16 +#define S_R3 12 +#define S_R2 8 +#define S_R1 4 +#define S_R0 0 + +#define MODE_SVC 0x13 +#define I_BIT 0x80 + +/* + * use bad_save_user_regs for abort/prefetch/undef/swi ... + * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling + */ + + .macro bad_save_user_regs + sub sp, sp, #S_FRAME_SIZE + stmia sp, {r0 - r12} @ Calling r0-r12 + ldr r2, _armboot_start + sub r2, r2, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN) + sub r2, r2, #(CFG_GBL_DATA_SIZE+8) @ set base 2 words into abort stack + ldmia r2, {r2 - r3} @ get pc, cpsr + add r0, sp, #S_FRAME_SIZE @ restore sp_SVC + + add r5, sp, #S_SP + mov r1, lr + stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr + mov r0, sp + .endm + + .macro irq_save_user_regs + sub sp, sp, #S_FRAME_SIZE + stmia sp, {r0 - r12} @ Calling r0-r12 + add r8, sp, #S_PC + stmdb r8, {sp, lr}^ @ Calling SP, LR + str lr, [r8, #0] @ Save calling PC + mrs r6, spsr + str r6, [r8, #4] @ Save CPSR + str r0, [r8, #8] @ Save OLD_R0 + mov r0, sp + .endm + + .macro irq_restore_user_regs + ldmia sp, {r0 - lr}^ @ Calling r0 - lr + mov r0, r0 + ldr lr, [sp, #S_PC] @ Get PC + add sp, sp, #S_FRAME_SIZE + subs pc, lr, #4 @ return & move spsr_svc into cpsr + .endm + + .macro get_bad_stack + ldr r13, _armboot_start @ setup our mode stack + sub r13, r13, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN) + sub r13, r13, #(CFG_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack + + str lr, [r13] @ save caller lr / spsr + mrs lr, spsr + str lr, [r13, #4] + + mov r13, #MODE_SVC @ prepare SVC-Mode + @ msr spsr_c, r13 + msr spsr, r13 + mov lr, pc + movs pc, lr + .endm + + .macro get_irq_stack @ setup IRQ stack + ldr sp, IRQ_STACK_START + .endm + + .macro get_fiq_stack @ setup FIQ stack + ldr sp, FIQ_STACK_START + .endm + +/* + * exception handlers + */ + .align 5 +undefined_instruction: + get_bad_stack + bad_save_user_regs + bl do_undefined_instruction + + .align 5 +software_interrupt: + get_bad_stack + bad_save_user_regs + bl do_software_interrupt + + .align 5 +prefetch_abort: + get_bad_stack + bad_save_user_regs + bl do_prefetch_abort + + .align 5 +data_abort: + get_bad_stack + bad_save_user_regs + bl do_data_abort + + .align 5 +not_used: + get_bad_stack + bad_save_user_regs + bl do_not_used + +#ifdef CONFIG_USE_IRQ + + .align 5 +irq: + get_irq_stack + irq_save_user_regs + bl do_irq + irq_restore_user_regs + + .align 5 +fiq: + get_fiq_stack + /* someone ought to write a more effiction fiq_save_user_regs */ + irq_save_user_regs + bl do_fiq + irq_restore_user_regs + +#else + + .align 5 +irq: + get_bad_stack + bad_save_user_regs + bl do_irq + + .align 5 +fiq: + get_bad_stack + bad_save_user_regs + bl do_fiq + +#endif + + .align 5 +.globl reset_cpu +reset_cpu: + mov ip, #0 + mcr p15, 0, ip, c7, c7, 0 @ invalidate cache + mcr p15, 0, ip, c8, c7, 0 @ flush TLB (v4) + mrc p15, 0, ip, c1, c0, 0 @ get ctrl register + bic ip, ip, #0x000f @ ............wcam + bic ip, ip, #0x2100 @ ..v....s........ + mcr p15, 0, ip, c1, c0, 0 @ ctrl register + mov pc, r0 diff --git a/include/configs/Adder.h b/include/configs/Adder.h new file mode 100644 index 0000000000..11a82c9fc7 --- /dev/null +++ b/include/configs/Adder.h @@ -0,0 +1,185 @@ +/* + * Copyright (C) 2004 Arabella Software Ltd. + * Yuli Barcohen + * + * Support for Analogue&Micro Adder boards family. + * Tested on AdderII and Adder87x. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#if !defined(CONFIG_MPC875) && !defined(CONFIG_MPC852T) +#define CONFIG_MPC875 +#endif + +#define CONFIG_ADDER /* Analogue&Micro Adder board */ + +#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ +#define CONFIG_BAUDRATE 38400 + +#define CONFIG_FEC_ENET /* Ethernet is on FEC */ +#ifdef CONFIG_FEC_ENET +#define CFG_DISCOVER_PHY +#define FEC_ENET +#endif /* CONFIG_FEC_ENET */ + +#define CONFIG_8xx_OSCLK 10000000 /* 10 MHz oscillator on EXTCLK */ + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ + | CFG_CMD_DHCP \ + | CFG_CMD_IMMAP \ + | CFG_CMD_MII \ + | CFG_CMD_PING \ + ) + +/* This must be included AFTER the definition of CONFIG_COMMANDS */ +#include + +#define CONFIG_BOOTDELAY 5 /* Autoboot after 5 seconds */ +#define CONFIG_BOOTCOMMAND "bootm fe040000" /* Autoboot command */ +#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rw" + +#define CONFIG_BZIP2 /* Include support for bzip2 compressed images */ +#undef CONFIG_WATCHDOG /* Disable platform specific watchdog */ + +/*----------------------------------------------------------------------- + * Miscellaneous configurable options + */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#define CFG_LONGHELP /* #undef to save memory */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* Max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_LOAD_ADDR 0x100000 /* Default load address */ + +#define CFG_HZ 1000 /* Decrementer freq: 1 ms ticks */ + +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/*----------------------------------------------------------------------- + * RAM configuration (note that CFG_SDRAM_BASE must be zero) + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_SIZE 0x00800000 /* 8 Mbyte */ + +#define CFG_OR1_PRELIM (0xFF800000 | OR_CSNT_SAM | OR_ACS_DIV2) +#define CFG_BR1_PRELIM (CFG_SDRAM_BASE | BR_PS_32 | BR_MS_UPMA | BR_V) + +#define CFG_MAMR 0x00802114 + +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00700000 /* 1 ... 7 MB in SDRAM */ + +#define CFG_RESET_ADDRESS 0x09900000 + +/*----------------------------------------------------------------------- + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 KB for Monitor */ +#ifdef CONFIG_BZIP2 +#define CFG_MALLOC_LEN (2500 << 10) /* Reserve ~2.5 MB for malloc() */ +#else +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 KB for malloc() */ +#endif /* CONFIG_BZIP2 */ + +/*----------------------------------------------------------------------- + * Flash organisation + */ +#define CFG_FLASH_BASE 0xFE000000 +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CFG_MAX_FLASH_BANKS 1 /* Max number of flash banks */ +#define CFG_MAX_FLASH_SECT 128 /* Max num of sects on one chip */ + +/* Environment is in flash */ +#define CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE 0x10000 /* We use one complete sector */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) + +#define CFG_OR0_PRELIM 0xFF000774 +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | BR_PS_16 | BR_MS_GPCM | BR_V) + +/*----------------------------------------------------------------------- + * Internal Memory Map Register + */ +#define CFG_IMMR 0xFF000000 + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR CFG_IMMR +#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CFG_GBL_DATA_SIZE 128 /* Size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Configuration registers + */ +#ifdef CONFIG_WATCHDOG +#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | \ + SYPCR_SWF | SYPCR_SWE | SYPCR_SWRI | \ + SYPCR_SWP) +#else +#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | \ + SYPCR_SWF | SYPCR_SWP) +#endif /* CONFIG_WATCHDOG */ + +#define CFG_SIUMCR (SIUMCR_MLRC01 | SIUMCR_DBGC11) + +/* TBSCR - Time Base Status and Control Register */ +#define CFG_TBSCR (TBSCR_TBF | TBSCR_TBE) + +/* PISCR - Periodic Interrupt Status and Control */ +#define CFG_PISCR (PISCR_PS | PISCR_PITF) + +/* PLPRCR - PLL, Low-Power, and Reset Control Register */ +/* #define CFG_PLPRCR PLPRCR_TEXPS */ + +/* SCCR - System Clock and reset Control Register */ +#define SCCR_MASK SCCR_EBDF11 +#define CFG_SCCR SCCR_RTSEL + +#define CFG_DER 0 + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx chips */ + +/*----------------------------------------------------------------------- + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from flash */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#endif /* __CONFIG_H */ diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h new file mode 100644 index 0000000000..9d4ab2b52e --- /dev/null +++ b/include/configs/mx1ads.h @@ -0,0 +1,185 @@ +/* + * include/configs/mx1ads.h + * + * (c) Copyright 2004 + * Techware Information Technology, Inc. + * http://www.techware.com.tw/ + * + * Ming-Len Wu + * + * This is the Configuration setting for Motorola MX1ADS board + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * If we are developing, we might want to start armboot from ram + * so we MUST NOT initialize critical regs like mem-timing ... + */ +#define CONFIG_INIT_CRITICAL /* undef for developing */ + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ +#define CONFIG_MC9328 1 /* It's a Motorola MC9328 SoC */ +#define CONFIG_MX1ADS 1 /* on a Motorola MX1ADS Board */ + +#define BOARD_LATE_INIT 1 + + +#define USE_920T_MMU 1 +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#if 0 +#define CFG_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */ +#define CFG_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */ +#define CFG_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */ +#endif + +/* + * Size of malloc() pool + */ + +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * CS8900 Ethernet drivers + */ +#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */ +#define CS8900_BASE 0x15000300 +#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */ + +/* + * select serial console configuration + */ + +#define CONFIG_UART1 1 +/* #define CONFIG_UART2 1 */ + +#define CONFIG_BAUDRATE 115200 + +/*********************************************************** + * Command definition + ***********************************************************/ + +#define CONFIG_COMMANDS \ + (CONFIG_CMD_DFL | \ + CFG_CMD_CACHE | \ + /*CFG_CMD_NAND |*/ \ + /*CFG_CMD_EEPROM |*/ \ + /*CFG_CMD_I2C |*/ \ + /*CFG_CMD_USB |*/ \ + CFG_CMD_REGINFO | \ + CFG_CMD_ELF) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTARGS "root=/dev/docbp mem=48M" +#define CONFIG_ETHADDR 08:00:3e:26:0a:5c +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.0.22 +#define CONFIG_SERVERIP 192.168.0.11 +#define CONFIG_BOOTFILE "mx1ads" +/*#define CONFIG_BOOTCOMMAND "tftp; bootm" */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ + /* what's this ? it's not used anywhere */ +#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + */ + +#define CFG_HUSH_PARSER 1 +#define CFG_PROMPT_HUSH_PS2 "> " + +#define CFG_LONGHELP /* undef to save memory */ + +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT "MX1ADS$ " /* Monitor Command Prompt */ +#else +#define CFG_PROMPT "MX1ADS=> " /* Monitor Command Prompt */ +#endif + +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) + /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x09000000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0AF00000 /* 63 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0x08800000 /* default load address */ + + +#define CFG_HZ 1000 + +/* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ + + +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */ +#define PHYS_SDRAM_1 0x08000000 /* SDRAM on CSD0 */ +#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ + +#define CFG_MAX_FLASH_BANKS 1 /* 1 bank of SyncFlash */ +#define CFG_FLASH_BASE 0x0C000000 /* SyncFlash on CSD1 */ +#define FLASH_BANK_SIZE 0x01000000 /* 16 MB Total */ + + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ + + +#define CONFIG_SYNCFLASH 1 +#define PHYS_FLASH_SIZE 0x01000000 +#define CFG_MAX_FLASH_SECT (16) +#define CFG_ENV_ADDR (CFG_FLASH_BASE+0x00ff0000) + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 0x0f000 /* Total Size of Environment Sector */ +#define CFG_ENV_SECT_SIZE 0x100000 +#endif /* __CONFIG_H */ diff --git a/include/flash.h b/include/flash.h index 190eb17d09..ddba7e51e6 100644 --- a/include/flash.h +++ b/include/flash.h @@ -372,6 +372,7 @@ extern void flash_read_factory_serial(flash_info_t * info, void * buffer, int of #define FLASH_FUJLV650 0x00B4 /* Fujitsu MBM 29LV650UE/651UE */ +#define FLASH_MT28S4M16LC 0x00B5 /* Micron MT28S4M16LC */ #define FLASH_UNKNOWN 0xFFFF /* unknown flash type */ diff --git a/include/mc9328.h b/include/mc9328.h new file mode 100644 index 0000000000..5adbf2c6cd --- /dev/null +++ b/include/mc9328.h @@ -0,0 +1,1221 @@ +/* + * include/mc9328.h + * + * (c) Copyright 2004 + * Techware Information Technology, Inc. + * http://www.techware.com.tw/ + * + * Ming-Len Wu + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#ifndef __MC9328_H__ +#define __MC9328_H__ + +typedef volatile unsigned long VU32; +typedef VU32 * P_VU32; + +#define __REG(x) (*((volatile u32 *)(x))) + + +/* + * MX1 Chip selects & internal memory's + */ + + +#define MX1_DMI_PHYS 0x00000000 /* double map image */ +#define MX1_BROM_PHYS 0x00100000 /* Bootstrape ROM */ +#define MX1_ESRAM_PHYS 0x00300000 /* Embedded SRAM (128KB)*/ + +#define MX1_CSD0_PHYS 0x08000000 /* CSD0 64MB (SDRAM) */ +#define MX1_CSD1_PHYS 0x0C000000 /* CSD1 64MB (SDRAM) */ +#define MX1_CS0_PHYS 0x10000000 /* CS0 32MB (Flash) */ +#define MX1_CS1_PHYS 0x12000000 /* CS1 16MB (Flash) */ +#define MX1_CS2_PHYS 0x13000000 /* CS2 16MB (Ext SRAM) */ +#define MX1_CS3_PHYS 0x14000000 /* CS3 16MB (Spare) */ +#define MX1_CS4_PHYS 0x15000000 /* CS4 16MB (Spare) */ +#define MX1_CS5_PHYS 0x16000000 /* CS5 16MB (Spare) */ + + + +/* + * MX1 Watchdog registers + */ + +#define MX1_WCR __REG(0x00201000) /* Watchdog Control Register */ +#define MX1_WSR __REG(0x00201004) /* Watchdog Service Register */ +#define MX1_WSTR __REG(0x00201008) /* Watchdog Status Register */ + + + +/* + * MX1 Timer registers + */ + +#define MX1_TCTL1 __REG(0x00202000) /* Timer 1 Control Register */ +#define MX1_TPRER1 __REG(0x00202004) /* Timer 1 Prescaler Register */ +#define MX1_TCMP1 __REG(0x00202008) /* Timer 1 Compare Register */ +#define MX1_TCR1 __REG(0x0020200C) /* Timer 1 Capture Register */ +#define MX1_TCN1 __REG(0x00202010) /* Timer 1 Counter Register */ +#define MX1_TSTAT1 __REG(0x00202014) /* Timer 1 Status Register */ + + +#define MX1_TCTL2 __REG(0x00203000) /* Timer 2 Control Register */ +#define MX1_TPRER2 __REG(0x00203004) /* Timer 2 Prescaler Register */ +#define MX1_TCMP2 __REG(0x00203008) /* Timer 2 Compare Register */ +#define MX1_TCR2 __REG(0x0020300C) /* Timer 2 Capture Register */ +#define MX1_TCN2 __REG(0x00203010) /* Timer 2 Counter Register */ +#define MX1_TSTAT2 __REG(0x00203014) /* Timer 2 Status Register */ + + + +/* + * MX1 RTC registers + */ + +#define MX1_HOURMIN __REG(0x00204000) /* RTC Hour & Min Counter Registers */ +#define MX1_SECONDS __REG(0x00204004) /* RTC Seconds Counter Registers */ +#define MX1_ALRM_HM __REG(0x00204008) /* RTC Hour & Min Alarm Registers */ +#define MX1_ALRM_SEC __REG(0x0020400C) /* RTC Seconds Alarm Registers */ +#define MX1_RCCTL __REG(0x00204010) /* RTC Control Registers */ +#define MX1_RTCISR __REG(0x00204014) /* RTC Interrupt Status Registers */ +#define MX1_RTCIENR __REG(0x00204018) /* RTC Interrupt Enable Registers */ +#define MX1_STPWCH __REG(0x0020401C) /* RTC Stopwatch Minutes Registers */ +#define MX1_DAYR __REG(0x00204020) /* RTC Days Counter Registers */ +#define MX1_DAYALARM __REG(0x00204020) /* RTC Day Alarm Registers */ + + +/* + * MX1 LCD Controller registers + */ + +#define MX1_SSA __REG(0x00205000) /* Screen Start Address Register */ +#define MX1_SIZE __REG(0x00205004) /* Size Register */ +#define MX1_VPW __REG(0x00205008) /* Virtual Page Width Register */ +#define MX1_CPOS __REG(0x0020500C) /* LCD Cursor Position Register */ +#define MX1_LCWHB __REG(0x00205010) /* LCD Cursor Width Height & Blink Register */ +#define MX1_LCHCC __REG(0x00205014) /* LCD Color Cursor Mapping Register */ +#define MX1_PCR __REG(0x00205018) /* LCD Panel Configuration Register */ +#define MX1_HCR __REG(0x0020501C) /* Horizontal Configuration Register */ +#define MX1_VCR __REG(0x00205020) /* Vertical Configuration Register */ +#define MX1_POS __REG(0x00205024) /* Panning Offset Register */ +#define MX1_LGPMR __REG(0x00205028) /* LCD Gray Palette Mapping Register */ +#define MX1_PWMR __REG(0x0020502C) /* PWM Contrast Control Register */ +#define MX1_DMACR __REG(0x00205030) /* DMA Control Register */ +#define MX1_RMCR __REG(0x00205034) /* Refresh Mode Control Register */ +#define MX1_LCDICR __REG(0x00205038) /* Interrupt Configuration Register */ +#define MX1_LCDISR __REG(0x00205040) /* Interrupt Status Register */ + + +/* + * MX1 UART registers + */ + +/* UART 1 */ +#define MX1_URX0D_1 __REG(0x00206000) /* UART 1 Receiver Register 0 */ +#define MX1_URX1D_1 __REG(0x00206004) /* UART 1 Receiver Register 1 */ +#define MX1_URX2D_1 __REG(0x00206008) /* UART 1 Receiver Register 2 */ +#define MX1_URX3D_1 __REG(0x0020600C) /* UART 1 Receiver Register 3 */ +#define MX1_URX4D_1 __REG(0x00206010) /* UART 1 Receiver Register 4 */ +#define MX1_URX5D_1 __REG(0x00206014) /* UART 1 Receiver Register 5 */ +#define MX1_URX6D_1 __REG(0x00206018) /* UART 1 Receiver Register 6 */ +#define MX1_URX7D_1 __REG(0x0020601C) /* UART 1 Receiver Register 7 */ +#define MX1_URX8D_1 __REG(0x00206020) /* UART 1 Receiver Register 8 */ +#define MX1_URX9D_1 __REG(0x00206024) /* UART 1 Receiver Register 9 */ +#define MX1_URX10D_1 __REG(0x00206028) /* UART 1 Receiver Register 10 */ +#define MX1_URX11D_1 __REG(0x0020602C) /* UART 1 Receiver Register 11 */ +#define MX1_URX12D_1 __REG(0x00206030) /* UART 1 Receiver Register 12 */ +#define MX1_URX13D_1 __REG(0x00206034) /* UART 1 Receiver Register 13 */ +#define MX1_URX14D_1 __REG(0x00206038) /* UART 1 Receiver Register 14 */ +#define MX1_URX15D_1 __REG(0x0020603c) /* UART 1 Receiver Register 15 */ + + +#define MX1_UTX0D_1 __REG(0x00206040) /* UART 1 Transmitter Register 0 */ +#define MX1_UTX1D_1 __REG(0x00206044) /* UART 1 Transmitter Register 1 */ +#define MX1_UTX2D_1 __REG(0x00206048) /* UART 1 Transmitter Register 2 */ +#define MX1_UTX3D_1 __REG(0x0020604C) /* UART 1 Transmitter Register 3 */ +#define MX1_UTX4D_1 __REG(0x00206050) /* UART 1 Transmitter Register 4 */ +#define MX1_UTX5D_1 __REG(0x00206054) /* UART 1 Transmitter Register 5 */ +#define MX1_UTX6D_1 __REG(0x00206058) /* UART 1 Transmitter Register 6 */ +#define MX1_UTX7D_1 __REG(0x0020605C) /* UART 1 Transmitter Register 7 */ +#define MX1_UTX8D_1 __REG(0x00206060) /* UART 1 Transmitter Register 8 */ +#define MX1_UTX9D_1 __REG(0x00206064) /* UART 1 Transmitter Register 9 */ +#define MX1_UTX10D_1 __REG(0x00206068) /* UART 1 Transmitter Register 10 */ +#define MX1_UTX11D_1 __REG(0x0020606C) /* UART 1 Transmitter Register 11 */ +#define MX1_UTX12D_1 __REG(0x00206060) /* UART 1 Transmitter Register 12 */ +#define MX1_UTX13D_1 __REG(0x00206074) /* UART 1 Transmitter Register 13 */ +#define MX1_UTX14D_1 __REG(0x00206078) /* UART 1 Transmitter Register 14 */ +#define MX1_UTX15D_1 __REG(0x0020607c) /* UART 1 Transmitter Register 15 */ + +#define MX1_UCR1_1 __REG(0x00206080) /* UART 1 Control Register 1 */ +#define MX1_UCR2_1 __REG(0x00206084) /* UART 1 Control Register 2 */ +#define MX1_UCR3_1 __REG(0x00206088) /* UART 1 Control Register 3 */ +#define MX1_UCR4_1 __REG(0x0020608C) /* UART 1 Control Register 4 */ +#define MX1_UFCR_1 __REG(0x00206090) /* UART 1 FIFO Control Register */ +#define MX1_USR1_1 __REG(0x00206094) /* UART 1 Status Register 1 */ +#define MX1_USR2_1 __REG(0x00206098) /* UART 1 Status Register 2 */ +#define MX1_UESC_1 __REG(0x0020609C) /* UART 1 Escape Character Register */ +#define MX1_UTIM_1 __REG(0x002060A0) /* UART 1 Escape Timer Register */ +#define MX1_UBIR_1 __REG(0x002060A4) /* UART 1 BRM Incremental Register */ +#define MX1_UBMR_1 __REG(0x002060A8) /* UART 1 BRM Modulator Register */ +#define MX1_UBRC_1 __REG(0x002060AC) /* UART 1 Baud Rate Count Register */ +#define MX1_BIPR1_1 __REG(0x002060B0) /* UART 1 BRM Incremental Preset Register 1 */ +#define MX1_BIPR2_1 __REG(0x002060B4) /* UART 1 BRM Incremental Preset Register 2 */ +#define MX1_BIPR3_1 __REG(0x002060B8) /* UART 1 BRM Incremental Preset Register 3 */ +#define MX1_BIPR4_1 __REG(0x002060BC) /* UART 1 BRM Incremental Preset Register 4 */ +#define MX1_BMPR1_1 __REG(0x002060C0) /* UART 1 BRM Modulator Preset Register 1 */ +#define MX1_BMPR2_1 __REG(0x002060C4) /* UART 1 BRM Modulator Preset Register 2 */ +#define MX1_BMPR3_1 __REG(0x002060C8) /* UART 1 BRM Modulator Preset Register 3 */ +#define MX1_BMPR4_1 __REG(0x002060CC) /* UART 1 BRM Modulator Preset Register 4 */ +#define MX1_UTS_1 __REG(0x002060D0) /* UART 1 Test Register 1 */ + + +/* UART 2 */ +#define MX1_URX0D_2 __REG(0x00207000) /* UART 2 Receiver Register 0 */ +#define MX1_URX1D_2 __REG(0x00207004) /* UART 2 Receiver Register 1 */ +#define MX1_URX2D_2 __REG(0x00207008) /* UART 2 Receiver Register 2 */ +#define MX1_URX3D_2 __REG(0x0020700C) /* UART 2 Receiver Register 3 */ +#define MX1_URX4D_2 __REG(0x00207010) /* UART 2 Receiver Register 4 */ +#define MX1_URX5D_2 __REG(0x00207014) /* UART 2 Receiver Register 5 */ +#define MX1_URX6D_2 __REG(0x00207018) /* UART 2 Receiver Register 6 */ +#define MX1_URX7D_2 __REG(0x0020701C) /* UART 2 Receiver Register 7 */ +#define MX1_URX8D_2 __REG(0x00207020) /* UART 2 Receiver Register 8 */ +#define MX1_URX9D_2 __REG(0x00207024) /* UART 2 Receiver Register 9 */ +#define MX1_URX10D_2 __REG(0x00207028) /* UART 2 Receiver Register 10 */ +#define MX1_URX11D_2 __REG(0x0020702C) /* UART 2 Receiver Register 11 */ +#define MX1_URX12D_2 __REG(0x00207030) /* UART 2 Receiver Register 12 */ +#define MX1_URX13D_2 __REG(0x00207034) /* UART 2 Receiver Register 13 */ +#define MX1_URX14D_2 __REG(0x00207038) /* UART 2 Receiver Register 14 */ +#define MX1_URX15D_2 __REG(0x0020703c) /* UART 2 Receiver Register 15 */ + + +#define MX1_UTX0D_2 __REG(0x00207040) /* UART 2 Transmitter Register 0 */ +#define MX1_UTX1D_2 __REG(0x00207044) /* UART 2 Transmitter Register 1 */ +#define MX1_UTX2D_2 __REG(0x00207048) /* UART 2 Transmitter Register 2 */ +#define MX1_UTX3D_2 __REG(0x0020704C) /* UART 2 Transmitter Register 3 */ +#define MX1_UTX4D_2 __REG(0x00207050) /* UART 2 Transmitter Register 4 */ +#define MX1_UTX5D_2 __REG(0x00207054) /* UART 2 Transmitter Register 5 */ +#define MX1_UTX6D_2 __REG(0x00207058) /* UART 2 Transmitter Register 6 */ +#define MX1_UTX7D_2 __REG(0x0020705C) /* UART 2 Transmitter Register 7 */ +#define MX1_UTX8D_2 __REG(0x00207060) /* UART 2 Transmitter Register 8 */ +#define MX1_UTX9D_2 __REG(0x00207064) /* UART 2 Transmitter Register 9 */ +#define MX1_UTX10D_2 __REG(0x00207068) /* UART 2 Transmitter Register 10 */ +#define MX1_UTX11D_2 __REG(0x0020706C) /* UART 2 Transmitter Register 11 */ +#define MX1_UTX12D_2 __REG(0x00207060) /* UART 2 Transmitter Register 12 */ +#define MX1_UTX13D_2 __REG(0x00207074) /* UART 2 Transmitter Register 13 */ +#define MX1_UTX14D_2 __REG(0x00207078) /* UART 2 Transmitter Register 14 */ +#define MX1_UTX15D_2 __REG(0x0020707c) /* UART 2 Transmitter Register 15 */ + +#define MX1_UCR1_2 __REG(0x00207080) /* UART 2 Control Register 1 */ +#define MX1_UCR2_2 __REG(0x00207084) /* UART 2 Control Register 2 */ +#define MX1_UCR3_2 __REG(0x00207088) /* UART 2 Control Register 3 */ +#define MX1_UCR4_2 __REG(0x0020708C) /* UART 2 Control Register 4 */ +#define MX1_UFCR_2 __REG(0x00207090) /* UART 2 FIFO Control Register */ +#define MX1_USR1_2 __REG(0x00207094) /* UART 2 Status Register 1 */ +#define MX1_USR2_2 __REG(0x00207098) /* UART 2 Status Register 2 */ +#define MX1_UESC_2 __REG(0x0020709C) /* UART 2 Escape Character Register */ +#define MX1_UTIM_2 __REG(0x002070A0) /* UART 2 Escape Timer Register */ +#define MX1_UBIR_2 __REG(0x002070A4) /* UART 2 BRM Incremental Register */ +#define MX1_UBMR_2 __REG(0x002070A8) /* UART 2 BRM Modulator Register */ +#define MX1_UBRC_2 __REG(0x002070AC) /* UART 2 Baud Rate Count Register */ +#define MX1_BIPR1_2 __REG(0x002070B0) /* UART 2 BRM Incremental Preset Register 1 */ +#define MX1_BIPR2_2 __REG(0x002070B4) /* UART 2 BRM Incremental Preset Register 2 */ +#define MX1_BIPR3_2 __REG(0x002070B8) /* UART 2 BRM Incremental Preset Register 3 */ +#define MX1_BIPR4_2 __REG(0x002070BC) /* UART 2 BRM Incremental Preset Register 4 */ +#define MX1_BMPR1_2 __REG(0x002070C0) /* UART 2 BRM Modulator Preset Register 1 */ +#define MX1_BMPR2_2 __REG(0x002070C4) /* UART 2 BRM Modulator Preset Register 2 */ +#define MX1_BMPR3_2 __REG(0x002070C8) /* UART 2 BRM Modulator Preset Register 3 */ +#define MX1_BMPR4_2 __REG(0x002070CC) /* UART 2 BRM Modulator Preset Register 4 */ +#define MX1_UTS_2 __REG(0x002070D0) /* UART 2 Test Register 1 */ + + +/* + * MX1 PWM registers + */ + +#define MX1_PWMC __REG(0x00208000) /* PWM Control Register */ +#define MX1_PWMS __REG(0x00208004) /* PWM Sample Register */ +#define MX1_PWMP __REG(0x00208008) /* PWM Period Register */ +#define MX1_PWMCNT __REG(0x0020800C) /* PWM Counter Register */ + + + +/* + * MX1 DMAC registers + */ + +#define MX1_DCR __REG(0x00209000) /* DMA Control Register */ +#define MX1_DISR __REG(0x00209004) /* DMA Interrupt Status Register */ +#define MX1_DIMR __REG(0x00209008) /* DMA Interrupt Mask Register */ +#define MX1_DBTOSR __REG(0x0020900C) /* DMA Burst Time-Out Status Register */ +#define MX1_DRTOSR __REG(0x00209010) /* DMA Request Time-Out Status Register */ +#define MX1_DSESR __REG(0x00209014) /* DMA Request Time-Out Status Register */ +#define MX1_DBOSR __REG(0x00209018) /* DMA Buffer Overflow Status Register */ +#define MX1_DBTOCR __REG(0x0020901C) /* DMA Burst Time-Out Control Register */ + +#define MX1_WSRA __REG(0x00209040) /* DMA W-Size Register A */ +#define MX1_XSRA __REG(0x00209044) /* DMA X-Size Register A */ +#define MX1_YSRA __REG(0x00209048) /* DMA Y-Size Register A */ + +#define MX1_WSRB __REG(0x0020904C) /* DMA W-Size Register B */ +#define MX1_XSRB __REG(0x00209050) /* DMA X-Size Register B */ +#define MX1_YSRB __REG(0x00209054) /* DMA Y-Size Register B */ + +/* Channel 0 */ + +#define MX1_SAR0 __REG(0x00209080) /* Channel 0 Source Address Register */ +#define MX1_DAR0 __REG(0x00209084) /* Channel 0 Destination Address Register */ +#define MX1_CNTR0 __REG(0x00209088) /* Channel 0 Count Register */ +#define MX1_CCR0 __REG(0x0020908C) /* Channel 0 Control Register */ +#define MX1_RSSR0 __REG(0x00209090) /* Channel 0 Request Source Select Register */ +#define MX1_BLR0 __REG(0x00209094) /* Channel 0 Burst Length Register */ +#define MX1_RTOR0 __REG(0x00209098) /* Channel 0 Request Time-Out Register */ +#define MX1_BUCR0 __REG(0x00209098) /* Channel 0 Bus Utilization Control Register */ + + +/* Channel 1 */ + +#define MX1_SAR1 __REG(0x002090C0) /* Channel 1 Source Address Register */ +#define MX1_DAR1 __REG(0x002090C4) /* Channel 1 Destination Address Register */ +#define MX1_CNTR1 __REG(0x002090C8) /* Channel 1 Count Register */ +#define MX1_CCR1 __REG(0x002090CC) /* Channel 1 Control Register */ +#define MX1_RSSR1 __REG(0x002090D0) /* Channel 1 Request Source Select Register */ +#define MX1_BLR1 __REG(0x002090D4) /* Channel 1 Burst Length Register */ +#define MX1_RTOR1 __REG(0x002090D8) /* Channel 1 Request Time-Out Register */ +#define MX1_BUCR1 __REG(0x002090D8) /* Channel 1 Bus Utilization Control Register */ + + +/* Channel 2 */ + +#define MX1_SAR2 __REG(0x00209100) /* Channel 2 Source Address Register */ +#define MX1_DAR2 __REG(0x00209104) /* Channel 2 Destination Address Register */ +#define MX1_CNTR2 __REG(0x00209108) /* Channel 2 Count Register */ +#define MX1_CCR2 __REG(0x0020910C) /* Channel 2 Control Register */ +#define MX1_RSSR2 __REG(0x00209110) /* Channel 2 Request Source Select Register */ +#define MX1_BLR2 __REG(0x00209114) /* Channel 2 Burst Length Register */ +#define MX1_RTOR2 __REG(0x00209118) /* Channel 2 Request Time-Out Register */ +#define MX1_BUCR2 __REG(0x00209118) /* Channel 2 Bus Utilization Control Register */ + + + +/* Channel 3 */ + +#define MX1_SAR3 __REG(0x00209140) /* Channel 3 Source Address Register */ +#define MX1_DAR3 __REG(0x00209144) /* Channel 3 Destination Address Register */ +#define MX1_CNTR3 __REG(0x00209148) /* Channel 3 Count Register */ +#define MX1_CCR3 __REG(0x0020914C) /* Channel 3 Control Register */ +#define MX1_RSSR3 __REG(0x00209150) /* Channel 3 Request Source Select Register */ +#define MX1_BLR3 __REG(0x00209154) /* Channel 3 Burst Length Register */ +#define MX1_RTOR3 __REG(0x00209158) /* Channel 3 Request Time-Out Register */ +#define MX1_BUCR3 __REG(0x00209158) /* Channel 3 Bus Utilization Control Register */ + + +/* Channel 4 */ + +#define MX1_SAR4 __REG(0x00209180) /* Channel 4 Source Address Register */ +#define MX1_DAR4 __REG(0x00209184) /* Channel 4 Destination Address Register */ +#define MX1_CNTR4 __REG(0x00209188) /* Channel 4 Count Register */ +#define MX1_CCR4 __REG(0x0020918C) /* Channel 4 Control Register */ +#define MX1_RSSR4 __REG(0x00209190) /* Channel 4 Request Source Select Register */ +#define MX1_BLR4 __REG(0x00209194) /* Channel 4 Burst Length Register */ +#define MX1_RTOR4 __REG(0x00209198) /* Channel 4 Request Time-Out Register */ +#define MX1_BUCR4 __REG(0x00209198) /* Channel 4 Bus Utilization Control Register */ + + +/* Channel 5 */ + +#define MX1_SAR5 __REG(0x002091C0) /* Channel 5 Source Address Register */ +#define MX1_DAR5 __REG(0x002091C4) /* Channel 5 Destination Address Register */ +#define MX1_CNTR5 __REG(0x002091C8) /* Channel 5 Count Register */ +#define MX1_CCR5 __REG(0x002091CC) /* Channel 5 Control Register */ +#define MX1_RSSR5 __REG(0x002091D0) /* Channel 5 Request Source Select Register */ +#define MX1_BLR5 __REG(0x002091D4) /* Channel 5 Burst Length Register */ +#define MX1_RTOR5 __REG(0x002091D8) /* Channel 5 Request Time-Out Register */ +#define MX1_BUCR5 __REG(0x002091D8) /* Channel 5 Bus Utilization Control Register */ + + +/* Channel 6 */ + +#define MX1_SAR6 __REG(0x00209200) /* Channel 6 Source Address Register */ +#define MX1_DAR6 __REG(0x00209204) /* Channel 6 Destination Address Register */ +#define MX1_CNTR6 __REG(0x00209208) /* Channel 6 Count Register */ +#define MX1_CCR6 __REG(0x0020920C) /* Channel 6 Control Register */ +#define MX1_RSSR6 __REG(0x00209210) /* Channel 6 Request Source Select Register */ +#define MX1_BLR6 __REG(0x00209214) /* Channel 6 Burst Length Register */ +#define MX1_RTOR6 __REG(0x00209218) /* Channel 6 Request Time-Out Register */ +#define MX1_BUCR6 __REG(0x00209218) /* Channel 6 Bus Utilization Control Register */ + + +/* Channel 7 */ + +#define MX1_SAR7 __REG(0x00209240) /* Channel 7 Source Address Register */ +#define MX1_DAR7 __REG(0x00209244) /* Channel 7 Destination Address Register */ +#define MX1_CNTR7 __REG(0x00209248) /* Channel 7 Count Register */ +#define MX1_CCR7 __REG(0x0020924C) /* Channel 7 Control Register */ +#define MX1_RSSR7 __REG(0x00209250) /* Channel 7 Request Source Select Register */ +#define MX1_BLR7 __REG(0x00209254) /* Channel 7 Burst Length Register */ +#define MX1_RTOR7 __REG(0x00209258) /* Channel 7 Request Time-Out Register */ +#define MX1_BUCR7 __REG(0x00209258) /* Channel 7 Bus Utilization Control Register */ + + +/* Channel 8 */ + +#define MX1_SAR8 __REG(0x00209280) /* Channel 8 Source Address Register */ +#define MX1_DAR8 __REG(0x00209284) /* Channel 8 Destination Address Register */ +#define MX1_CNTR8 __REG(0x00209288) /* Channel 8 Count Register */ +#define MX1_CCR8 __REG(0x0020928C) /* Channel 8 Control Register */ +#define MX1_RSSR8 __REG(0x00209290) /* Channel 8 Request Source Select Register */ +#define MX1_BLR8 __REG(0x00209294) /* Channel 8 Burst Length Register */ +#define MX1_RTOR8 __REG(0x00209298) /* Channel 8 Request Time-Out Register */ +#define MX1_BUCR8 __REG(0x00209298) /* Channel 8 Bus Utilization Control Register */ + + +/* Channel 9 */ + +#define MX1_SAR9 __REG(0x002092C0) /* Channel 9 Source Address Register */ +#define MX1_DAR9 __REG(0x002092C4) /* Channel 9 Destination Address Register */ +#define MX1_CNTR9 __REG(0x002092C8) /* Channel 9 Count Register */ +#define MX1_CCR9 __REG(0x002092CC) /* Channel 9 Control Register */ +#define MX1_RSSR9 __REG(0x002092D0) /* Channel 9 Request Source Select Register */ +#define MX1_BLR9 __REG(0x002092D4) /* Channel 9 Burst Length Register */ +#define MX1_RTOR9 __REG(0x002092D8) /* Channel 9 Request Time-Out Register */ +#define MX1_BUCR9 __REG(0x002092D8) /* Channel 9 Bus Utilization Control Register */ + + +/* Channel 10 */ + +#define MX1_SAR10 __REG(0x00209300) /* Channel 10 Source Address Register */ +#define MX1_DAR10 __REG(0x00209304) /* Channel 10 Destination Address Register */ +#define MX1_CNTR10 __REG(0x00209308) /* Channel 10 Count Register */ +#define MX1_CCR10 __REG(0x0020930C) /* Channel 10 Control Register */ +#define MX1_RSSR10 __REG(0x00209310) /* Channel 10 Request Source Select Register */ +#define MX1_BLR10 __REG(0x00209314) /* Channel 10 Burst Length Register */ +#define MX1_RTOR10 __REG(0x00209318) /* Channel 10 Request Time-Out Register */ +#define MX1_BUCR10 __REG(0x00209318) /* Channel 10 Bus Utilization Control Register */ + + +#define MX1_TCR __REG(0x00209340) /* Test Control Register */ +#define MX1_TFIFOAR __REG(0x00209344) /* Test FIFO A Register */ +#define MX1_TDRR __REG(0x00209348) /* Test DMA Request Register */ +#define MX1_TDIPR __REG(0x0020934C) /* Test DMA In Progress Register */ +#define MX1_TFIFOBR __REG(0x00209350) /* Test FIFO B Register */ + + + +/* + * MX1 SIM registers + */ + +#define MX1_PORT_CNTL __REG(0x00211000) /* Port Control Register */ +#define MX1_CNTL __REG(0x00211004) /* Control Register */ +#define MX1_RCV_THRESHOLD __REG(0x00211008)/* Receive Threshold Register */ +#define MX1_ENABLE __REG(0x0021100C) /* Transmit/Receive Enable Register */ +#define MX1_XMT_STATUS __REG(0x00211010) /* Transmit Status Register */ +#define MX1_RCV_STATUS __REG(0x00211014) /* Receive Status Register */ +#define MX1_SIM_INT_MASK __REG(0x00211018) /* Interrupt Mask Register */ +#define MX1_XMT_BUF __REG(0x0021101C) /* Port Transmit Buffer Register */ +#define MX1_RCV_BUF __REG(0x00211020) /* Receive Buffer Register */ +#define MX1_PORT_DETECT __REG(0x00211024) /* Detect Register */ +#define MX1_XMT_THRESHOLD __REG(0x00211028)/* Transmit Threshold Register */ +#define MX1_GUARD_CNTL __REG(0x0021102C) /* Transmit Guard Control Register */ +#define MX1_OD_CONFIG __REG(0x00211030) /* Open-Drain Configuration Control Register */ +#define MX1_RESET_CNTL __REG(0x00211034) /* Reset Control Register */ +#define MX1_CHAR_WAIT __REG(0x00211038) /* Charactor Wait Timer Register */ +#define MX1_GPCNT __REG(0x0021103C) /* General Purpose Counter Register */ +#define MX1_DIVISOR __REG(0x00211040) /* Divisor Register */ + + +/* + * MX1 USBD registers + */ + +#define MX1_USB_FRAME __REG(0x00212000) /* USB Frame Number and Match Register */ +#define MX1_USB_SPEC __REG(0x00212004) /* USB Spec & Release Number Register */ +#define MX1_USB_STAT __REG(0x00212008) /* USB Status Register */ +#define MX1_USB_CTRL __REG(0x0021200C) /* USB Control Register */ +#define MX1_USB_DADR __REG(0x00212010) /* USB Descriptor RAM Address Register */ +#define MX1_USB_DDAT __REG(0x00212014) /* USB Descriptor RAM/Endpoint buffer Data Register */ +#define MX1_USB_INTR __REG(0x00212018) /* USB Interrupt Status Register */ +#define MX1_USB_MASK __REG(0x0021201C) /* USB Interrupt Mask Register */ +#define MX1_USB_ENAB __REG(0x00212024) /* USB Enable Register */ + + +/* Endpoint 0 */ +#define MX1_USB_EP0_STAT __REG(0x00212030) /* Endpoint 0 Status/Control Register */ +#define MX1_USB_EP0_INTR __REG(0x00212034) /* Endpoint 0 Interrupt Status Register */ +#define MX1_USB_EP0_MASK __REG(0x00212038) /* Endpoint 0 Interrupt Mask Register */ +#define MX1_USB_EP0_FDAT __REG(0x0021203C) /* Endpoint 0 FIFO Data Register */ +#define MX1_USB_EP0_FSTAT __REG(0x00212040) /* Endpoint 0 FIFO Status Register */ +#define MX1_USB_EP0_FCTRL __REG(0x00212044) /* Endpoint 0 FIFO Control Register */ +#define MX1_USB_EP0_LRFP __REG(0x00212048) /* Endpoint 0 Last Read Frame Pointer Register */ +#define MX1_USB_EP0_LWFP __REG(0x0021204C) /* Endpoint 0 Last Write Frame Pointer Register */ +#define MX1_USB_EP0_FALRM __REG(0x00212050) /* Endpoint 0 FIFO Alarm Register */ +#define MX1_USB_EP0_FRDP __REG(0x00212054) /* Endpoint 0 FIFO Read Pointer Register */ +#define MX1_USB_EP0_FWRP __REG(0x00212058) /* Endpoint 0 FIFO Write Pointer Register */ + + +/* Endpoint 1 */ +#define MX1_USB_EP1_STAT __REG(0x00212060) /* Endpoint 1 Status/Control Register */ +#define MX1_USB_EP1_INTR __REG(0x00212064) /* Endpoint 1 Interrupt Status Register */ +#define MX1_USB_EP1_MASK __REG(0x00212068) /* Endpoint 1 Interrupt Mask Register */ +#define MX1_USB_EP1_FDAT __REG(0x0021206C) /* Endpoint 1 FIFO Data Register */ +#define MX1_USB_EP1_FSTAT __REG(0x00212070) /* Endpoint 1 FIFO Status Register */ +#define MX1_USB_EP1_FCTRL __REG(0x00212074) /* Endpoint 1 FIFO Control Register */ +#define MX1_USB_EP1_LRFP __REG(0x00212078) /* Endpoint 1 Last Read Frame Pointer Register */ +#define MX1_USB_EP1_LWFP __REG(0x0021207C) /* Endpoint 1 Last Write Frame Pointer Register */ +#define MX1_USB_EP1_FALRM __REG(0x00212080) /* Endpoint 1 FIFO Alarm Register */ +#define MX1_USB_EP1_FRDP __REG(0x00212084) /* Endpoint 1 FIFO Read Pointer Register */ +#define MX1_USB_EP1_FWRP __REG(0x00212088) /* Endpoint 1 FIFO Write Pointer Register */ + + +/* Endpoint 2 */ +#define MX1_USB_EP2_STAT __REG(0x00212090) /* Endpoint 2 Status/Control Register */ +#define MX1_USB_EP2_INTR __REG(0x00212094) /* Endpoint 2 Interrupt Status Register */ +#define MX1_USB_EP2_MASK __REG(0x00212098) /* Endpoint 2 Interrupt Mask Register */ +#define MX1_USB_EP2_FDAT __REG(0x0021209C) /* Endpoint 2 FIFO Data Register */ +#define MX1_USB_EP2_FSTAT __REG(0x002120A0) /* Endpoint 2 FIFO Status Register */ +#define MX1_USB_EP2_FCTRL __REG(0x002120A4) /* Endpoint 2 FIFO Control Register */ +#define MX1_USB_EP2_LRFP __REG(0x002120A8) /* Endpoint 2 Last Read Frame Pointer Register */ +#define MX1_USB_EP2_LWFP __REG(0x002120AC) /* Endpoint 2 Last Write Frame Pointer Register */ +#define MX1_USB_EP2_FALRM __REG(0x002120B0) /* Endpoint 2 FIFO Alarm Register */ +#define MX1_USB_EP2_FRDP __REG(0x002120B4) /* Endpoint 2 FIFO Read Pointer Register */ +#define MX1_USB_EP2_FWRP __REG(0x002120B8) /* Endpoint 2 FIFO Write Pointer Register */ + + +/* Endpoint 3 */ +#define MX1_USB_EP3_STAT __REG(0x002120C0) /* Endpoint 3 Status/Control Register */ +#define MX1_USB_EP3_INTR __REG(0x002120C4) /* Endpoint 3 Interrupt Status Register */ +#define MX1_USB_EP3_MASK __REG(0x002120C8) /* Endpoint 3 Interrupt Mask Register */ +#define MX1_USB_EP3_FDAT __REG(0x002120CC) /* Endpoint 3 FIFO Data Register */ +#define MX1_USB_EP3_FSTAT __REG(0x002120D0) /* Endpoint 3 FIFO Status Register */ +#define MX1_USB_EP3_FCTRL __REG(0x002120D4) /* Endpoint 3 FIFO Control Register */ +#define MX1_USB_EP3_LRFP __REG(0x002120D8) /* Endpoint 3 Last Read Frame Pointer Register */ +#define MX1_USB_EP3_LWFP __REG(0x002120DC) /* Endpoint 3 Last Write Frame Pointer Register */ +#define MX1_USB_EP3_FALRM __REG(0x002120E0) /* Endpoint 3 FIFO Alarm Register */ +#define MX1_USB_EP3_FRDP __REG(0x002120E4) /* Endpoint 3 FIFO Read Pointer Register */ +#define MX1_USB_EP3_FWRP __REG(0x002120E8) /* Endpoint 3 FIFO Write Pointer Register */ + + + +/* Endpoint 4 */ +#define MX1_USB_EP4_STAT __REG(0x002120F0) /* Endpoint 4 Status/Control Register */ +#define MX1_USB_EP4_INTR __REG(0x002120F4) /* Endpoint 4 Interrupt Status Register */ +#define MX1_USB_EP4_MASK __REG(0x002120F8) /* Endpoint 4 Interrupt Mask Register */ +#define MX1_USB_EP4_FDAT __REG(0x002120FC) /* Endpoint 4 FIFO Data Register */ +#define MX1_USB_EP4_FSTAT __REG(0x00212100) /* Endpoint 4 FIFO Status Register */ +#define MX1_USB_EP4_FCTRL __REG(0x00212104) /* Endpoint 4 FIFO Control Register */ +#define MX1_USB_EP4_LRFP __REG(0x00212108) /* Endpoint 4 Last Read Frame Pointer Register */ +#define MX1_USB_EP4_LWFP __REG(0x0021210C) /* Endpoint 4 Last Write Frame Pointer Register */ +#define MX1_USB_EP4_FALRM __REG(0x00212110) /* Endpoint 4 FIFO Alarm Register */ +#define MX1_USB_EP4_FRDP __REG(0x00212114) /* Endpoint 4 FIFO Read Pointer Register */ +#define MX1_USB_EP4_FWRP __REG(0x00212118) /* Endpoint 4 FIFO Write Pointer Register */ + + + +/* Endpoint 5 */ +#define MX1_USB_EP5_STAT __REG(0x00212120) /* Endpoint 5 Status/Control Register */ +#define MX1_USB_EP5_INTR __REG(0x00212124) /* Endpoint 5 Interrupt Status Register */ +#define MX1_USB_EP5_MASK __REG(0x00212128) /* Endpoint 5 Interrupt Mask Register */ +#define MX1_USB_EP5_FDAT __REG(0x0021212C) /* Endpoint 5 FIFO Data Register */ +#define MX1_USB_EP5_FSTAT __REG(0x00212130) /* Endpoint 5 FIFO Status Register */ +#define MX1_USB_EP5_FCTRL __REG(0x00212134) /* Endpoint 5 FIFO Control Register */ +#define MX1_USB_EP5_LRFP __REG(0x00212138) /* Endpoint 5 Last Read Frame Pointer Register */ +#define MX1_USB_EP5_LWFP __REG(0x0021213C) /* Endpoint 5 Last Write Frame Pointer Register */ +#define MX1_USB_EP5_FALRM __REG(0x00212140) /* Endpoint 5 FIFO Alarm Register */ +#define MX1_USB_EP5_FRDP __REG(0x00212144) /* Endpoint 5 FIFO Read Pointer Register */ +#define MX1_USB_EP5_FWRP __REG(0x00212148) /* Endpoint 5 FIFO Write Pointer Register */ + + + + +/* + * MX1 SPI 1 registers + */ + +#define MX1_RXDATAREG1 __REG(0x00213000) /* SPI 1 Rx Data Register */ +#define MX1_TXDATAREG1 __REG(0x00213004) /* SPI 1 Tx Data Register */ +#define MX1_CONTROLREG1 __REG(0x00213008) /* SPI 1 Control Register */ +#define MX1_INTREG1 __REG(0x0021300C) /* SPI 1 Interrupt Control/Status Register */ +#define MX1_TESTREG1 __REG(0x00213010) /* SPI 1 Test Register */ +#define MX1_PERIODREG1 __REG(0x00213014) /* SPI 1 Sample Period Control Register */ +#define MX1_DMAREG1 __REG(0x00213018) /* SPI 1 DMA Control Register */ +#define MX1_RESETREG1 __REG(0x00213018) /* SPI 1 Soft Reset Register */ + + + + +/* + * MX1 MMC/SDHC registers + */ + +#define MX1_STR_STP_CLK __REG(0x00214000) /* MMC/SD Clock Control Register */ +#define MX1_STATUS __REG(0x00214004) /* MMC/SD Status Register */ +#define MX1_CLK_RATE __REG(0x00214008) /* MMC/SD Clock Rate Register */ +#define MX1_CMD_DAT_CONT __REG(0x0021400C) /* MMC/SD Command & Data Control Register */ +#define MX1_RES_TO __REG(0x00214010) /* MMC/SD Response Time Out Register */ +#define MX1_READ_TO __REG(0x00214014) /* MMC/SD Read Time Out Register */ +#define MX1_BLK_LEN __REG(0x00214018) /* MMC/SD Block Length Register */ +#define MX1_NOB __REG(0x0021401C) /* MMC/SD Number of Block Register */ +#define MX1_REV_NO __REG(0x00214020) /* MMC/SD Revision Number Register */ +#define MX1_MMC_INT_MASK __REG(0x00214024) /* MMC/SD Interrupt Mask Register */ +#define MX1_CMD __REG(0x00214028) /* MMC/SD Command Number Register */ +#define MX1_ARGH __REG(0x0021402C) /* MMC/SD Higher Argument Register */ +#define MX1_ARGL __REG(0x00214030) /* MMC/SD Lower Argument Register */ +#define MX1_RES_FIFO __REG(0x00214034) /* MMC/SD Response FIFO Register */ +#define MX1_BUFFER_ACCESS __REG(0x00214038) /* MMC/SD Buffer Access Register */ + + + +/* + * MX1 ASP registers + */ + +#define MX1_ASP_PADFIFO __REG(0x00215000) /* Pen Sample FIFO */ +#define MX1_ASP_VADFIFO __REG(0x00215004) /* Voice ADC Register */ +#define MX1_ASP_VDAFIFO __REG(0x00215008) /* Voice DAC Register */ +#define MX1_ASP_VADCOEF __REG(0x0021500C) /* Voice ADC FIR Coefficients RAM */ +#define MX1_ASP_ACNTLCR __REG(0x00215010) /* Control Register */ +#define MX1_ASP_PSMPLRG __REG(0x00215014) /* Pen A/D Sample Rate Control Register */ +#define MX1_ASP_ICNTLR __REG(0x00215018) /* Interrupt Control Register */ +#define MX1_ASP_ISTATR __REG(0x0021501C) /* Interrupt/Error Status Register */ +#define MX1_ASP_VADGAIN __REG(0x00215020) /* Voice ADC Control Register */ +#define MX1_ASP_VDAGAIN __REG(0x00215024) /* Voice DAC Control Register */ +#define MX1_ASP_VDACOEF __REG(0x00215028) /* Voice DAC FIR Coefficients RAM */ +#define MX1_ASP_CLKDIV __REG(0x0021502C) /* Clock Divide Register */ +#define MX1_ASP_CMPCNTL __REG(0x0021502C) /* Compare Control Register */ + + + +/* + * MX1 BTA registers + */ + + +/* + * MX1 I2C registers + */ + +#define MX1_IADR __REG(0x00217000) /* I2C Address Register */ +#define MX1_IFDR __REG(0x00217004) /* I2C Frequency Divider Register */ +#define MX1_I2CR __REG(0x00217008) /* I2C Control Register */ +#define MX1_I2CSR __REG(0x0021700C) /* I2C Status Register */ +#define MX1_I2DR __REG(0x00217010) /* I2C Data I/O Register */ + + + +/* + * MX1 SSI registers + */ + +#define MX1_STX __REG(0x00218000) /* SSI Transmit Data Register */ +#define MX1_SRX __REG(0x00218004) /* SSI Receive Data Register */ +#define MX1_SCSR __REG(0x00218008) /* SSI Control/Status Register */ +#define MX1_STCR __REG(0x0021800C) /* SSI Transmit Configuration Register */ +#define MX1_SRCR __REG(0x00218010) /* SSI Recieve Configuration Register */ +#define MX1_STCCR __REG(0x00218014) /* SSI Transmit Clock Control Register */ +#define MX1_SRCCR __REG(0x00218018) /* SSI Receive Clock Control Register */ +#define MX1_STSR __REG(0x0021801C) /* SSI Time Slot Register */ +#define MX1_SFCSR __REG(0x00218020) /* SSI FIFO Control/Status Register */ +#define MX1_SOR __REG(0x00218024) /* SSI Option Register */ + + + +/* + * MX1 SPI 2 registers + */ + +#define MX1_RXDATAREG2 __REG(0x00219000) /* SPI 2 Rx Data Register */ +#define MX1_TXDATAREG2 __REG(0x00219004) /* SPI 2 Tx Data Register */ +#define MX1_CONTROLREG2 __REG(0x00219008) /* SPI 2 Control Register */ +#define MX1_INTREG2 __REG(0x0021900C) /* SPI 2 Interrupt Control/Status Register */ +#define MX1_TESTREG2 __REG(0x00219010) /* SPI 2 Test Register */ +#define MX1_PERIODREG2 __REG(0x00219014) /* SPI 2 Sample Period Control Register */ +#define MX1_DMAREG2 __REG(0x00219018) /* SPI 2 DMA Control Register */ +#define MX1_RESETREG2 __REG(0x00219018) /* SPI 2 Soft Reset Register */ + + + +/* + * MX1 MSHC registers + */ + +#define MX1_MSCMD __REG(0x0021A000) /* Memory Stick Command Register */ +#define MX1_MSCS __REG(0x0021A002) /* Memory Stick Control/Status Register */ +#define MX1_MSTDATA __REG(0x0021A004) /* Memory Stick Transmit FIFO Data Register */ +#define MX1_MSRDATA __REG(0x0021A004) /* Memory Stick Recieve FIFO Data Register */ +#define MX1_MSICS __REG(0x0021A006) /* Memory Stick Interrupt Control/Status Register */ +#define MX1_MSPPCD __REG(0x0021A008) /* Memory Stick Parallel Port Control/Data Register */ +#define MX1_MSC2 __REG(0x0021A00A) /* Memory Stick Control 2 Register */ +#define MX1_MSACD __REG(0x0021A00C) /* Memory Stick Auto Command Register */ +#define MX1_MSFAECS __REG(0x0021A00E) /* Memory Stick FIFO Access Error Control/Status Register */ +#define MX1_MSCLKD __REG(0x0021A010) /* Memory Stick Serial Clock divider Register */ +#define MX1_MSDRQC __REG(0x0021A012) /* Memory Stick DMA Request Control Register */ + + + +/* + * MX1 PLLCLK registers + */ + +#define MX1_CSCR __REG(0x0021B000) /* Clock Source Control Register */ +#define MX1_MPCTL0 __REG(0x0021B004) /* MCU PLL Control Register 0 */ +#define MX1_MPCTL1 __REG(0x0021B008) /* MCU PLL & System Clock Control Register 1 */ +#define MX1_UPCTL0 __REG(0x0021B00C) /* USB PLL Control Register 0 */ +#define MX1_UPCTL1 __REG(0x0021B010) /* USB PLL Control Register 1 */ +#define MX1_PCDR __REG(0x0021B020) /* Peripheral Clock Divider Register */ + + +/* + * MX1 RESET registers + */ + +#define MX1_RSR __REG(0x0021B800) /* Reset Source Register */ + + + +/* + * MX1 SYS CTRL registers + */ + +#define MX1_SIDR __REG(0x0021B804) /* Silicon ID Register */ +#define MX1_FMCR __REG(0x0021B808) /* Function MultiPlexing Control Register */ +#define MX1_GPCR __REG(0x0021B80C) /* Global Peripheral Control Register */ + + +/* + * MX1 GPIO registers + */ + +/* Port A */ +#define MX1_DDIR_A __REG(0x0021C000) /* Port A Data Direction Register */ +#define MX1_OCR1_A __REG(0x0021C004) /* Port A Output Configuration Register 1 */ +#define MX1_OCR2_A __REG(0x0021C008) /* Port A Output Configuration Register 2 */ +#define MX1_ICONFA1_A __REG(0x0021C00C) /* Port A Input Configuration Register A1 */ +#define MX1_ICONFA2_A __REG(0x0021C010) /* Port A Input Configuration Register A2 */ +#define MX1_ICONFB1_A __REG(0x0021C014) /* Port A Input Configuration Register B1 */ +#define MX1_ICONFB2_A __REG(0x0021C018) /* Port A Input Configuration Register B2 */ +#define MX1_DR_A __REG(0x0021C01C) /* Port A Data Register */ +#define MX1_GIUS_A __REG(0x0021C020) /* Port A GPIO In Use Register */ +#define MX1_SSR_A __REG(0x0021C024) /* Port A Sample Status Register */ +#define MX1_ICR1_A __REG(0x0021C028) /* Port A Interrupt Configuration Register 1 */ +#define MX1_ICR2_A __REG(0x0021C02C) /* Port A Interrupt Configuration Register 2 */ +#define MX1_IMR_A __REG(0x0021C030) /* Port A Interrupt Mask Register */ +#define MX1_ISR_A __REG(0x0021C034) /* Port A Interrupt Status Register */ +#define MX1_GPR_A __REG(0x0021C038) /* Port A General Purpose Register */ +#define MX1_SWR_A __REG(0x0021C03C) /* Port A Software Reset Register */ +#define MX1_PUEN_A __REG(0x0021C040) /* Port A Pull Up Enable Register */ + + +/* Port B */ +#define MX1_DDIR_B __REG(0x0021C100) /* Port B Data Direction Register */ +#define MX1_OCR1_B __REG(0x0021C104) /* Port B Output Configuration Register 1 */ +#define MX1_OCR2_B __REG(0x0021C108) /* Port B Output Configuration Register 2 */ +#define MX1_ICONFA1_B __REG(0x0021C10C) /* Port B Input Configuration Register A1 */ +#define MX1_ICONFA2_B __REG(0x0021C110) /* Port B Input Configuration Register A2 */ +#define MX1_ICONFB1_B __REG(0x0021C114) /* Port B Input Configuration Register B1 */ +#define MX1_ICONFB2_B __REG(0x0021C118) /* Port B Input Configuration Register B2 */ +#define MX1_DR_B __REG(0x0021C11C) /* Port B Data Register */ +#define MX1_GIUS_B __REG(0x0021C120) /* Port B GPIO In Use Register */ +#define MX1_SSR_B __REG(0x0021C124) /* Port B Sample Status Register */ +#define MX1_ICR1_B __REG(0x0021C128) /* Port B Interrupt Configuration Register 1 */ +#define MX1_ICR2_B __REG(0x0021C12C) /* Port B Interrupt Configuration Register 2 */ +#define MX1_IMR_B __REG(0x0021C130) /* Port B Interrupt Mask Register */ +#define MX1_ISR_B __REG(0x0021C134) /* Port B Interrupt Status Register */ +#define MX1_GPR_B __REG(0x0021C138) /* Port B General Purpose Register */ +#define MX1_SWR_B __REG(0x0021C13C) /* Port B Software Reset Register */ +#define MX1_PUEN_B __REG(0x0021C140) /* Port B Pull Up Enable Register */ + + + +/* Port C */ +#define MX1_DDIR_C __REG(0x0021C200) /* Port C Data Direction Register */ +#define MX1_OCR1_C __REG(0x0021C204) /* Port C Output Configuration Register 1 */ +#define MX1_OCR2_C __REG(0x0021C208) /* Port C Output Configuration Register 2 */ +#define MX1_ICONFA1_C __REG(0x0021C20C) /* Port C Input Configuration Register A1 */ +#define MX1_ICONFA2_C __REG(0x0021C210) /* Port C Input Configuration Register A2 */ +#define MX1_ICONFB1_C __REG(0x0021C214) /* Port C Input Configuration Register B1 */ +#define MX1_ICONFB2_C __REG(0x0021C218) /* Port C Input Configuration Register B2 */ +#define MX1_DR_C __REG(0x0021C21C) /* Port C Data Register */ +#define MX1_GIUS_C __REG(0x0021C220) /* Port C GPIO In Use Register */ +#define MX1_SSR_C __REG(0x0021C224) /* Port C Sample Status Register */ +#define MX1_ICR1_C __REG(0x0021C228) /* Port C Interrupt Configuration Register 1 */ +#define MX1_ICR2_C __REG(0x0021C22C) /* Port C Interrupt Configuration Register 2 */ +#define MX1_IMR_C __REG(0x0021C230) /* Port C Interrupt Mask Register */ +#define MX1_ISR_C __REG(0x0021C234) /* Port C Interrupt Status Register */ +#define MX1_GPR_C __REG(0x0021C238) /* Port C General Purpose Register */ +#define MX1_SWR_C __REG(0x0021C23C) /* Port C Software Reset Register */ +#define MX1_PUEN_C __REG(0x0021C240) /* Port C Pull Up Enable Register */ + + + +/* Port D */ +#define MX1_DDIR_D __REG(0x0021C300) /* Port D Data Direction Register */ +#define MX1_OCR1_D __REG(0x0021C304) /* Port D Output Configuration Register 1 */ +#define MX1_OCR2_D __REG(0x0021C308) /* Port D Output Configuration Register 2 */ +#define MX1_ICONFA1_D __REG(0x0021C30C) /* Port D Input Configuration Register A1 */ +#define MX1_ICONFA2_D __REG(0x0021C310) /* Port D Input Configuration Register A2 */ +#define MX1_ICONFB1_D __REG(0x0021C314) /* Port D Input Configuration Register B1 */ +#define MX1_ICONFB2_D __REG(0x0021C318) /* Port D Input Configuration Register B2 */ +#define MX1_DR_D __REG(0x0021C31C) /* Port D Data Register */ +#define MX1_GIUS_D __REG(0x0021C320) /* Port D GPIO In Use Register */ +#define MX1_SSR_D __REG(0x0021C324) /* Port D Sample Status Register */ +#define MX1_ICR1_D __REG(0x0021C328) /* Port D Interrupt Configuration Register 1 */ +#define MX1_ICR2_D __REG(0x0021C32C) /* Port D Interrupt Configuration Register 2 */ +#define MX1_IMR_D __REG(0x0021C330) /* Port D Interrupt Mask Register */ +#define MX1_ISR_D __REG(0x0021C334) /* Port D Interrupt Status Register */ +#define MX1_GPR_D __REG(0x0021C338) /* Port D General Purpose Register */ +#define MX1_SWR_D __REG(0x0021C33C) /* Port D Software Reset Register */ +#define MX1_PUEN_D __REG(0x0021C340) /* Port D Pull Up Enable Register */ + + + +/* + * MX1 EIM registers + */ + +#define MX1_CS0U __REG(0x00220000) /* Chip Select 0 Upper Control Register */ +#define MX1_CS0L __REG(0x00220004) /* Chip Select 0 Lower Control Register */ +#define MX1_CS1U __REG(0x00220008) /* Chip Select 1 Upper Control Register */ +#define MX1_CS1L __REG(0x0022000C) /* Chip Select 1 Lower Control Register */ +#define MX1_CS2U __REG(0x00220010) /* Chip Select 2 Upper Control Register */ +#define MX1_CS2L __REG(0x00220014) /* Chip Select 2 Lower Control Register */ +#define MX1_CS3U __REG(0x00220018) /* Chip Select 3 Upper Control Register */ +#define MX1_CS3L __REG(0x0022001C) /* Chip Select 3 Lower Control Register */ +#define MX1_CS4U __REG(0x00220020) /* Chip Select 4 Upper Control Register */ +#define MX1_CS4L __REG(0x00220024) /* Chip Select 4 Lower Control Register */ +#define MX1_CS5U __REG(0x00220028) /* Chip Select 5 Upper Control Register */ +#define MX1_CS5L __REG(0x0022002C) /* Chip Select 5 Lower Control Register */ +#define MX1_WEIM __REG(0x00220030) /* weim cONFIGURATION Register */ + + + +/* + * MX1 SDRAMC registers + */ + +#define MX1_SDCTL0 __REG(0x00221000) /* SDRAM 0 Control Register */ +#define MX1_SDCTL1 __REG(0x00221004) /* SDRAM 1 Control Register */ +#define MX1_MISCELLANEOUS __REG(0x00221014) /* Miscellaneous Register */ +#define MX1_SDRST __REG(0x00221018) /* SDRAM Reset Register */ + + + +/* + * MX1 MMA registers + */ + +#define MX1_MMA_MAC_MOD __REG(0x00222000) /* MMA MAC Module Register */ +#define MX1_MMA_MAC_CTRL __REG(0x00222004) /* MMA MAC Control Register */ +#define MX1_MMA_MAC_MULT __REG(0x00222008) /* MMA MAC Multiply Counter Register */ +#define MX1_MMA_MAC_ACCU __REG(0x0022200C) /* MMA MAC Accumulate Counter Register */ +#define MX1_MMA_MAC_INTR __REG(0x00222010) /* MMA MAC Interrupt Register */ +#define MX1_MMA_MAC_INTR_MASK __REG(0x00222014) /* MMA MAC Interrupt Mask Register */ +#define MX1_MMA_MAC_FIFO __REG(0x00222018) /* MMA MAC FIFO Register */ +#define MX1_MMA_MAC_FIFO_STAT __REG(0x0022201C) /* MMA MAC FIFO Status Register */ +#define MX1_MMA_MAC_BURST __REG(0x00222020) /* MMA MAC Burst Count Register */ +#define MX1_MMA_MAC_BITSEL __REG(0x00222024) /* MMA MAC Bit Select Register */ + +#define MX1_MMA_MAC_XBASE __REG(0x00222200) /* MMA MAC X Base Address Register */ +#define MX1_MMA_MAC_XINDEX __REG(0x00222204) /* MMA MAC X Index Register */ +#define MX1_MMA_MAC_XLENGTH __REG(0x00222208) /* MMA MAC X Length Register */ +#define MX1_MMA_MAC_XMODIFY __REG(0x0022220C) /* MMA MAC X Modify Register */ +#define MX1_MMA_MAC_XINCR __REG(0x00222210) /* MMA MAC X Increment Register */ +#define MX1_MMA_MAC_XCOUNT __REG(0x00222214) /* MMA MAC X Count Register */ + + +#define MX1_MMA_MAC_YBASE __REG(0x00222300) /* MMA MAC Y Base Address Register */ +#define MX1_MMA_MAC_YINDEX __REG(0x00222304) /* MMA MAC Y Index Register */ +#define MX1_MMA_MAC_YLENGTH __REG(0x00222308) /* MMA MAC Y Length Register */ +#define MX1_MMA_MAC_YMODIFY __REG(0x0022230C) /* MMA MAC Y Modify Register */ +#define MX1_MMA_MAC_YINCR __REG(0x00222310) /* MMA MAC Y Increment Register */ +#define MX1_MMA_MAC_YCOUNT __REG(0x00222314) /* MMA MAC Y Count Register */ + + +#define MX1_MMA_DCTCTRL __REG(0x00222400) /* DCT/iDCT Control Register */ +#define MX1_MMA_DCTVERSION __REG(0x00222404) /* DCT/iDCT Version Register */ +#define MX1_MMA_DCTIRQENA __REG(0x00222408) /* DCT/iDCT IRQ Enable Register */ +#define MX1_MMA_DCTIRQSTAT __REG(0x0022240C) /* DCT/iDCT IRQ Status Register */ +#define MX1_MMA_DCTSRCDATA __REG(0x00222410) /* DCT/iDCT Source Data Address */ +#define MX1_MMA_DCTDESDATA __REG(0x00222414) /* DCT/iDCT Destination Data Address */ +#define MX1_MMA_DCTXOFF __REG(0x00222418) /* DCT/iDCT X-Offset Address */ +#define MX1_MMA_DCTYOFF __REG(0x0022241C) /* DCT/iDCT Y-Offset Address */ +#define MX1_MMA_DCTXYCNT __REG(0x00222420) /* DCT/iDCT XY Count */ +#define MX1_MMA_DCTSKIP __REG(0x00222424) /* DCT/iDCT Skip Address */ +#define MX1_MMA_DCTFIFO __REG(0x00222500) /* DCT/iDCT Data FIFO */ + + + + +/* + * MX1 AITC registers + */ + +#define MX1_INTCNTL __REG(0x00223000) /* Interrupt Control Register */ +#define MX1_NIMASK __REG(0x00223004) /* Normal Interrupt Mask Register */ +#define MX1_INTENNUM __REG(0x00223008) /* Interrupt Enable Number Register */ +#define MX1_INTDISNUM __REG(0x0022300C) /* Interrupt Disable Number Register */ +#define MX1_INTENABLEH __REG(0x00223010) /* Interrupt Enable Register High */ +#define MX1_INTENABLEL __REG(0x00223014) /* Interrupt Enable Register Low */ +#define MX1_INTTYPEH __REG(0x00223018) /* Interrupt Type Register High */ +#define MX1_INTTYPEL __REG(0x0022301C) /* Interrupt Type Register Low */ +#define MX1_NIPRIORITY7 __REG(0x00223020) /* Normal Interrupt Priority Level Register 7*/ +#define MX1_NIPRIORITY6 __REG(0x00223024) /* Normal Interrupt Priority Level Register 6*/ +#define MX1_NIPRIORITY5 __REG(0x00223028) /* Normal Interrupt Priority Level Register 5*/ +#define MX1_NIPRIORITY4 __REG(0x0022302C) /* Normal Interrupt Priority Level Register 4*/ +#define MX1_NIPRIORITY3 __REG(0x00223030) /* Normal Interrupt Priority Level Register 3*/ +#define MX1_NIPRIORITY2 __REG(0x00223034) /* Normal Interrupt Priority Level Register 2*/ +#define MX1_NIPRIORITY1 __REG(0x00223038) /* Normal Interrupt Priority Level Register 1*/ +#define MX1_NIPRIORITY0 __REG(0x0022303C) /* Normal Interrupt Priority Level Register 0*/ +#define MX1_NIVECSR __REG(0x00223040) /* Normal Interrupt Vector & Status Register */ +#define MX1_FIVECSR __REG(0x00223044) /* Fast Interrupt Vector & Status Register */ +#define MX1_INTSRCH __REG(0x00223048) /* Interrupt Source Register High */ +#define MX1_INTSRCL __REG(0x0022304C) /* Interrupt Source Register Low */ +#define MX1_INTFRCH __REG(0x00223050) /* Interrupt Force Register High */ +#define MX1_INTFRCL __REG(0x00223054) /* Interrupt Force Register Low */ +#define MX1_NIPNDH __REG(0x00223058) /* Normal Interrupt Pending Register High */ +#define MX1_NIPNDL __REG(0x0022305C) /* Normal Interrupt Pending Register Low */ +#define MX1_FIPNDH __REG(0x00223060) /* Fast Interrupt Pending Register High */ +#define MX1_FIPNDL __REG(0x00223064) /* Fast Interrupt Pending Register Low */ + + +/* + * MX1 CSI registers + */ + +#define MX1_CSICR1 __REG(0x00224000) /* CSI Control Register 1 */ +#define MX1_CSICR2 __REG(0x00224004) /* CSI Control Register 2 */ +#define MX1_CSISR __REG(0x00224008) /* CSI Status Register 1 */ +#define MX1_CSISTATR __REG(0x0022400C) /* CSI Statistic FIFO Register 1 */ +#define MX1_CSIRXR __REG(0x00224010) /* CSI RxFIFO Register 1 */ + + + +#endif /* __MC9328_H__ */ + + + + + + + + + + + + + + + + + + + + + + + +#if 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +/* + MX1 dma definition +*/ + +#define MAX_DMA_ADDRESS 0xffffffff + +//#define MAX_DMA_CHANNELS 0 + +#define MAX_DMA_CHANNELS 11 +#define MAX_DMA_2D_REGSET 2 + +/* MX1 DMA module registers' address */ + +#define MX1_DMA_BASE IO_ADDRESS(0x00209000) +#define MX1_DMA_DCR (MX1_DMA_BASE + 0x00) // DMA control register +#define MX1_DMA_DISR (MX1_DMA_BASE + 0x04) // DMA interrupt status register +#define MX1_DMA_DIMR (MX1_DMA_BASE + 0x08) // DMA interrupt mask register +#define MX1_DMA_DBTOSR (MX1_DMA_BASE + 0x0C) // DMA burst time-out status register +#define MX1_DMA_DRTOSR (MX1_DMA_BASE + 0x10) // DMA request time-out status register +#define MX1_DMA_DSESR (MX1_DMA_BASE + 0x14) // DMA transfer error status register +#define MX1_DMA_DBOSR (MX1_DMA_BASE + 0x18) // DMA buffer overflow status register +#define MX1_DMA_DBTOCR (MX1_DMA_BASE + 0x1C) // DMA burst time-out control register +#define MX1_DMA_WSRA (MX1_DMA_BASE + 0x40) // W-size register A +#define MX1_DMA_XSRA (MX1_DMA_BASE + 0x44) // X-size register A +#define MX1_DMA_YSRA (MX1_DMA_BASE + 0x48) // Y-size register A +#define MX1_DMA_WSRB (MX1_DMA_BASE + 0x4C) // W-size register B +#define MX1_DMA_XSRB (MX1_DMA_BASE + 0x50) // X-size register B +#define MX1_DMA_YSRB (MX1_DMA_BASE + 0x54) // Y-size register B + +#define MX1_DMA_SAR0 (MX1_DMA_BASE + 0x80) // source address register 0 +#define MX1_DMA_DAR0 (MX1_DMA_BASE + 0x84) // destination address register 0 +#define MX1_DMA_CNTR0 (MX1_DMA_BASE + 0x88) // count register 0 +#define MX1_DMA_CCR0 (MX1_DMA_BASE + 0x8C) // channel control register 0 +#define MX1_DMA_RSSR0 (MX1_DMA_BASE + 0x90) // request source select register 0 +#define MX1_DMA_BLR0 (MX1_DMA_BASE + 0x94) // burst length register 0 +#define MX1_DMA_RTOR0 (MX1_DMA_BASE + 0x98) // request time-out register 0 +#define MX1_DMA_BUCR0 (MX1_DMA_BASE + 0x98) // bus utilization control register 0 + +/* register set 1 to 10 are offseted by 0x40 each = 0x10 pointers away */ + +#define DMA_REG_SET_OFS 0x10 + + +/* MX1 DMA module registers */ +#define _reg_DMA_DCR (*((P_VU32)MX1_DMA_DCR)) +#define _reg_DMA_DISR (*((P_VU32)MX1_DMA_DISR)) +#define _reg_DMA_DIMR (*((P_VU32)MX1_DMA_DIMR)) +#define _reg_DMA_DBTOSR (*((P_VU32)MX1_DMA_DBTOSR)) +#define _reg_DMA_DRTOSR (*((P_VU32)MX1_DMA_DRTOSR)) +#define _reg_DMA_DSESR (*((P_VU32)MX1_DMA_DSESR)) +#define _reg_DMA_DBOSR (*((P_VU32)MX1_DMA_DBOSR)) +#define _reg_DMA_DBTOCR (*((P_VU32)MX1_DMA_DBTOCR)) +#define _reg_DMA_WSRA (*((P_VU32)MX1_DMA_WSRA)) +#define _reg_DMA_XSRA (*((P_VU32)MX1_DMA_XSRA)) +#define _reg_DMA_YSRA (*((P_VU32)MX1_DMA_YSRA)) +#define _reg_DMA_WSRB (*((P_VU32)MX1_DMA_WSRB)) +#define _reg_DMA_XSRB (*((P_VU32)MX1_DMA_XSRB)) +#define _reg_DMA_YSRB (*((P_VU32)MX1_DMA_YSRB)) +#define _reg_DMA_SAR0 (*((P_VU32)MX1_DMA_SAR0)) +#define _reg_DMA_DAR0 (*((P_VU32)MX1_DMA_DAR0)) +#define _reg_DMA_CNTR0 (*((P_VU32)MX1_DMA_CNTR0)) +#define _reg_DMA_CCR0 (*((P_VU32)MX1_DMA_CCR0)) +#define _reg_DMA_RSSR0 (*((P_VU32)MX1_DMA_RSSR0)) +#define _reg_DMA_BLR0 (*((P_VU32)MX1_DMA_BLR0)) +#define _reg_DMA_RTOR0 (*((P_VU32)MX1_DMA_RTOR0)) +#define _reg_DMA_BUCR0 (*((P_VU32)MX1_DMA_BUCR0)) + +/* DMA error type definition */ +#define MX1_DMA_ERR_BTO 0 // burst time-out +#define MX1_DMA_ERR_RTO 1 // request time-out +#define MX1_DMA_ERR_TE 2 // transfer error +#define MX1_DMA_ERR_BO 3 // buffer overflow + + +/* Embedded SRAM */ + +#define MX1_SRAM_BASE 0x00300000 +#define MX1_SRAM_SIZE 0x00020000 + +#define + + +#define MX1ADS_SFLASH_BASE 0x0C000000 +#define MX1ADS_SFLASH_SIZE SZ_16M + +#define MX1ADS_IO_BASE 0x00200000 +#define MX1ADS_IO_SIZE SZ_256K + +#define MX1ADS_VID_BASE 0x00300000 +#define MX1ADS_VID_SIZE 0x26000 + +#define MX1ADS_VID_START IO_ADDRESS(MX1ADS_VID_BASE) + +#define MX1_GPIO_BASE 0x0021C000 // GPIO +#define MX1_EXT_UART_BASE 0x15000000 // external UART +#define MX1_TMR1_BASE 0x00202000 // Timer1 +#define MX1ADS_FLASH_BASE 0x0C000000 // sync FLASH +#define MX1_ESRAM_BASE 0x00300000 // embedded SRAM +#define MX1ADS_SDRAM_DISK_BASE 0x0B000000 // SDRAM disk base (last 16M of SDRAM) + +/* ------------------------------------------------------------------------ + * Motorola MX1 system registers + * ------------------------------------------------------------------------ + * + */ + +/* + * Register offests. + * + */ + +#define MX1ADS_AIPI1_OFFSET 0x00000 +#define MX1ADS_WDT_OFFSET 0x01000 +#define MX1ADS_TIM1_OFFSET 0x02000 +#define MX1ADS_TIM2_OFFSET 0x03000 +#define MX1ADS_RTC_OFFSET 0x04000 +#define MX1ADS_LCDC_OFFSET 0x05000 +#define MX1ADS_UART1_OFFSET 0x06000 +#define MX1ADS_UART2_OFFSET 0x07000 +#define MX1ADS_PWM_OFFSET 0x08000 +#define MX1ADS_DMAC_OFFSET 0x09000 +#define MX1ADS_AIPI2_OFFSET 0x10000 +#define MX1ADS_SIM_OFFSET 0x11000 +#define MX1ADS_USBD_OFFSET 0x12000 +#define MX1ADS_SPI1_OFFSET 0x13000 +#define MX1ADS_MMC_OFFSET 0x14000 +#define MX1ADS_ASP_OFFSET 0x15000 +#define MX1ADS_BTA_OFFSET 0x16000 +#define MX1ADS_I2C_OFFSET 0x17000 +#define MX1ADS_SSI_OFFSET 0x18000 +#define MX1ADS_SPI2_OFFSET 0x19000 +#define MX1ADS_MSHC_OFFSET 0x1A000 +#define MX1ADS_PLL_OFFSET 0x1B000 +#define MX1ADS_GPIO_OFFSET 0x1C000 +#define MX1ADS_EIM_OFFSET 0x20000 +#define MX1ADS_SDRAMC_OFFSET 0x21000 +#define MX1ADS_MMA_OFFSET 0x22000 +#define MX1ADS_AITC_OFFSET 0x23000 +#define MX1ADS_CSI_OFFSET 0x24000 + + +/* + * Register BASEs, based on OFFSETs + * + */ + +#define MX1ADS_AIPI1_BASE (MX1ADS_AIPI1_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_WDT_BASE (MX1ADS_WDT_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_TIM1_BASE (MX1ADS_TIM1_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_TIM2_BASE (MX1ADS_TIM2_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_RTC_BASE (MX1ADS_RTC_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_LCDC_BASE (MX1ADS_LCDC_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_UART1_BASE (MX1ADS_UART1_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_UART2_BASE (MX1ADS_UART2_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_PWM_BASE (MX1ADS_PWM_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_DMAC_BASE (MX1ADS_DMAC_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_AIPI2_BASE (MX1ADS_AIPI2_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_SIM_BASE (MX1ADS_SIM_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_USBD_BASE (MX1ADS_USBD_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_SPI1_BASE (MX1ADS_SPI1_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_MMC_BASE (MX1ADS_MMC_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_ASP_BASE (MX1ADS_ASP_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_BTA_BASE (MX1ADS_BTA_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_I2C_BASE (MX1ADS_I2C_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_SSI_BASE (MX1ADS_SSI_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_SPI2_BASE (MX1ADS_SPI2_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_MSHC_BASE (MX1ADS_MSHC_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_PLL_BASE (MX1ADS_PLL_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_GPIO_BASE (MX1ADS_GPIO_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_EIM_BASE (MX1ADS_EIM_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_SDRAMC_BASE (MX1ADS_SDRAMC_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_MMA_BASE (MX1ADS_MMA_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_AITC_BASE (MX1ADS_AITC_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_CSI_BASE (MX1ADS_CSI_OFFSET + MX1ADS_IO_BASE) + + +/* + * MX1 Interrupt numbers + * + */ +#define INT_SOFTINT 0 +#define CSI_INT 6 +#define DSPA_MAC_INT 7 +#define DSPA_INT 8 +#define COMP_INT 9 +#define MSHC_XINT 10 +#define GPIO_INT_PORTA 11 +#define GPIO_INT_PORTB 12 +#define GPIO_INT_PORTC 13 +#define LCDC_INT 14 +#define SIM_INT 15 +#define SIM_DATA_INT 16 +#define RTC_INT 17 +#define RTC_SAMINT 18 +#define UART2_MINT_PFERR 19 +#define UART2_MINT_RTS 20 +#define UART2_MINT_DTR 21 +#define UART2_MINT_UARTC 22 +#define UART2_MINT_TX 23 +#define UART2_MINT_RX 24 +#define UART1_MINT_PFERR 25 +#define UART1_MINT_RTS 26 +#define UART1_MINT_DTR 27 +#define UART1_MINT_UARTC 28 +#define UART1_MINT_TX 29 +#define UART1_MINT_RX 30 +#define VOICE_DAC_INT 31 +#define VOICE_ADC_INT 32 +#define PEN_DATA_INT 33 +#define PWM_INT 34 +#define SDHC_INT 35 +#define I2C_INT 39 +#define CSPI_INT 41 +#define SSI_TX_INT 42 +#define SSI_TX_ERR_INT 43 +#define SSI_RX_INT 44 +#define SSI_RX_ERR_INT 45 +#define TOUCH_INT 46 +#define USBD_INT0 47 +#define USBD_INT1 48 +#define USBD_INT2 49 +#define USBD_INT3 50 +#define USBD_INT4 51 +#define USBD_INT5 52 +#define USBD_INT6 53 +#define BTSYS_INT 55 +#define BTTIM_INT 56 +#define BTWUI_INT 57 +#define TIMER2_INT 58 +#define TIMER1_INT 59 +#define DMA_ERR 60 +#define DMA_INT 61 +#define GPIO_INT_PORTD 62 + + +#define MAXIRQNUM 62 +#define MAXFIQNUM 62 +#define MAXSWINUM 62 + + +#define TICKS_PER_uSEC 24 + +/* + * These are useconds NOT ticks. + * + */ +#define mSEC_1 1000 +#define mSEC_5 (mSEC_1 * 5) +#define mSEC_10 (mSEC_1 * 10) +#define mSEC_25 (mSEC_1 * 25) +#define SEC_1 (mSEC_1 * 1000) + + +#endif + +