From: Piotr Wilczek Date: Wed, 20 Nov 2013 09:43:49 +0000 (+0100) Subject: driver:i2c:s3c24x0: adapt driver to new i2c X-Git-Tag: v2014.01-rc2~45^2~7 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=2d8f1e27695a8a9a3ed863a510be58284b6b411c;p=u-boot driver:i2c:s3c24x0: adapt driver to new i2c This patch adapts the s3c24x0 driver to the new i2c framework. Config file is modified for all the boards that use the driver. Signed-off-by: Piotr Wilczek Signed-off-by: Kyungmin Park CC: Minkyu Kang CC: Heiko Schocher CC: Inderpal Singh CC: David Müller CC: Chander Kashyap CC: Lukasz Majewski Tested-by: Naveen Krishna Chatradhi Reviewed-by: Naveen Krishna Chatradhi --- diff --git a/board/samsung/smdk5250/exynos5-dt.c b/board/samsung/smdk5250/exynos5-dt.c index 6bcc883b10..6aa0509823 100644 --- a/board/samsung/smdk5250/exynos5-dt.c +++ b/board/samsung/smdk5250/exynos5-dt.c @@ -150,8 +150,6 @@ int power_init_board(void) set_ps_hold_ctrl(); - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - if (pmic_init(I2C_PMIC)) return -1; diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c index 7012c134fb..44be5fcaf9 100644 --- a/board/samsung/trats/trats.c +++ b/board/samsung/trats/trats.c @@ -57,15 +57,18 @@ int board_init(void) void i2c_init_board(void) { - struct exynos4_gpio_part1 *gpio1 = - (struct exynos4_gpio_part1 *)samsung_get_base_gpio_part1(); + int err; struct exynos4_gpio_part2 *gpio2 = (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2(); - /* I2C_5 -> PMIC -> Adapter 0 */ - s5p_gpio_direction_output(&gpio1->b, 7, 1); - s5p_gpio_direction_output(&gpio1->b, 6, 1); - /* I2C_9 -> FG -> Adapter 1 */ + /* I2C_5 -> PMIC */ + err = exynos_pinmux_config(PERIPH_ID_I2C5, PINMUX_FLAG_NONE); + if (err) { + debug("I2C%d not configured\n", (I2C_5)); + return; + } + + /* I2C_8 -> FG */ s5p_gpio_direction_output(&gpio2->y4, 0, 1); s5p_gpio_direction_output(&gpio2->y4, 1, 1); } @@ -290,10 +293,10 @@ int power_init_board(void) * The FUEL_GAUGE is marked as I2C9 on the schematic, but connected * to logical I2C adapter 1 */ - ret = pmic_init(I2C_0); + ret = pmic_init(I2C_5); ret |= pmic_init_max8997(); - ret |= power_fg_init(I2C_1); - ret |= power_muic_init(I2C_0); + ret |= power_fg_init(I2C_8); + ret |= power_muic_init(I2C_5); ret |= power_bat_init(0); if (ret) return ret; diff --git a/board/samsung/trats2/trats2.c b/board/samsung/trats2/trats2.c index d44d825e80..8df85ee396 100644 --- a/board/samsung/trats2/trats2.c +++ b/board/samsung/trats2/trats2.c @@ -115,12 +115,17 @@ static void board_external_gpio_init(void) #ifdef CONFIG_SYS_I2C_INIT_BOARD static void board_init_i2c(void) { + int err; + gpio1 = (struct exynos4x12_gpio_part1 *)EXYNOS4X12_GPIO_PART1_BASE; gpio2 = (struct exynos4x12_gpio_part2 *)EXYNOS4X12_GPIO_PART2_BASE; /* I2C_7 */ - s5p_gpio_direction_output(&gpio1->d0, 2, 1); - s5p_gpio_direction_output(&gpio1->d0, 3, 1); + err = exynos_pinmux_config(PERIPH_ID_I2C7, PINMUX_FLAG_NONE); + if (err) { + debug("I2C%d not configured\n", (I2C_7)); + return; + } /* I2C_8 */ s5p_gpio_direction_output(&gpio1->f1, 4, 1); @@ -132,6 +137,24 @@ static void board_init_i2c(void) } #endif +#ifdef CONFIG_SYS_I2C_SOFT +int get_soft_i2c_scl_pin(void) +{ + if (I2C_ADAP_HWNR) + return exynos4x12_gpio_part2_get_nr(m2, 1); /* I2C9 */ + else + return exynos4x12_gpio_part1_get_nr(f1, 4); /* I2C8 */ +} + +int get_soft_i2c_sda_pin(void) +{ + if (I2C_ADAP_HWNR) + return exynos4x12_gpio_part2_get_nr(m2, 0); /* I2C9 */ + else + return exynos4x12_gpio_part1_get_nr(f1, 5); /* I2C8 */ +} +#endif + int board_early_init_f(void) { check_hw_revision(); @@ -167,11 +190,11 @@ int power_init_board(void) #ifdef CONFIG_SYS_I2C_INIT_BOARD board_init_i2c(); #endif - pmic_init(I2C_0); /* I2C adapter 0 - bus name I2C_5 */ + pmic_init(I2C_7); /* I2C adapter 7 - bus name s3c24x0_7 */ pmic_init_max77686(); - pmic_init_max77693(I2C_2); /* I2C adapter 2 - bus name I2C_10 */ - power_muic_init(I2C_2); /* I2C adapter 2 - bus name I2C_10 */ - power_fg_init(I2C_1); /* I2C adapter 1 - bus name I2C_9 */ + pmic_init_max77693(I2C_9); /* I2C adapter 9 - bus name soft1 */ + power_muic_init(I2C_9); /* I2C adapter 9 - bus name soft1 */ + power_fg_init(I2C_8); /* I2C adapter 8 - bus name soft0 */ power_bat_init(0); p_chrg = pmic_get("MAX77693_PMIC"); diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index 553b519cca..fa3a875705 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -12,7 +12,6 @@ obj-$(CONFIG_I2C_MVTWSI) += mvtwsi.o obj-$(CONFIG_I2C_MV) += mv_i2c.o obj-$(CONFIG_I2C_MXS) += mxs_i2c.o obj-$(CONFIG_PCA9564_I2C) += pca9564_i2c.o -obj-$(CONFIG_DRIVER_S3C24X0_I2C) += s3c24x0_i2c.o obj-$(CONFIG_TSI108_I2C) += tsi108_i2c.o obj-$(CONFIG_U8500_I2C) += u8500_i2c.o obj-$(CONFIG_SH_SH7734_I2C) += sh_sh7734_i2c.o @@ -24,6 +23,7 @@ obj-$(CONFIG_SYS_I2C_OMAP24XX) += omap24xx_i2c.o obj-$(CONFIG_SYS_I2C_OMAP34XX) += omap24xx_i2c.o obj-$(CONFIG_SYS_I2C_PPC4XX) += ppc4xx_i2c.o obj-$(CONFIG_SYS_I2C_RCAR) += rcar_i2c.o +obj-$(CONFIG_SYS_I2C_S3C24X0) += s3c24x0_i2c.o obj-$(CONFIG_SYS_I2C_SH) += sh_i2c.o obj-$(CONFIG_SYS_I2C_SOFT) += soft_i2c.o obj-$(CONFIG_SYS_I2C_TEGRA) += tegra_i2c.o diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c index f77a9d1a1f..5dc35e7fb2 100644 --- a/drivers/i2c/s3c24x0_i2c.c +++ b/drivers/i2c/s3c24x0_i2c.c @@ -23,8 +23,6 @@ #include #include "s3c24x0_i2c.h" -#ifdef CONFIG_HARD_I2C - #define I2C_WRITE 0 #define I2C_READ 1 @@ -127,7 +125,6 @@ * For SPL boot some boards need i2c before SDRAM is initialised so force * variables to live in SRAM */ -static unsigned int g_current_bus __attribute__((section(".data"))); static struct s3c24x0_i2c_bus i2c_bus[CONFIG_MAX_I2C_NUM] __attribute__((section(".data"))); @@ -254,17 +251,17 @@ static void ReadWriteByte(struct s3c24x0_i2c *i2c) writel(readl(&i2c->iiccon) & ~I2CCON_IRPND, &i2c->iiccon); } -static struct s3c24x0_i2c *get_base_i2c(void) +static struct s3c24x0_i2c *get_base_i2c(int bus) { #ifdef CONFIG_EXYNOS4 struct s3c24x0_i2c *i2c = (struct s3c24x0_i2c *)(samsung_get_base_i2c() + (EXYNOS4_I2C_SPACING - * g_current_bus)); + * bus)); return i2c; #elif defined CONFIG_EXYNOS5 struct s3c24x0_i2c *i2c = (struct s3c24x0_i2c *)(samsung_get_base_i2c() + (EXYNOS5_I2C_SPACING - * g_current_bus)); + * bus)); return i2c; #else return s3c24x0_get_base_i2c(); @@ -298,7 +295,6 @@ static void i2c_ch_init(struct s3c24x0_i2c *i2c, int speed, int slaveadd) writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->iicstat); } -#ifdef CONFIG_I2C_MULTI_BUS static int hsi2c_get_clk_details(struct s3c24x0_i2c_bus *i2c_bus) { struct exynos5_hsi2c *hsregs = i2c_bus->hsregs; @@ -330,7 +326,6 @@ static int hsi2c_get_clk_details(struct s3c24x0_i2c_bus *i2c_bus) } return -1; } -#endif static void hsi2c_ch_init(struct s3c24x0_i2c_bus *i2c_bus) { @@ -401,49 +396,18 @@ static void exynos5_i2c_reset(struct s3c24x0_i2c_bus *i2c_bus) hsi2c_ch_init(i2c_bus); } -/* - * MULTI BUS I2C support - */ - -#ifdef CONFIG_I2C_MULTI_BUS -int i2c_set_bus_num(unsigned int bus) -{ - struct s3c24x0_i2c_bus *i2c_bus; - - i2c_bus = get_bus(bus); - if (!i2c_bus) - return -1; - g_current_bus = bus; - - if (i2c_bus->is_highspeed) { - if (hsi2c_get_clk_details(i2c_bus)) - return -1; - hsi2c_ch_init(i2c_bus); - } else { - i2c_ch_init(i2c_bus->regs, i2c_bus->clock_frequency, - CONFIG_SYS_I2C_SLAVE); - } - - return 0; -} - -unsigned int i2c_get_bus_num(void) -{ - return g_current_bus; -} -#endif - -void i2c_init(int speed, int slaveadd) +static void s3c24x0_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd) { struct s3c24x0_i2c *i2c; + struct s3c24x0_i2c_bus *bus; + #if !(defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5) struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio(); #endif ulong start_time = get_timer(0); /* By default i2c channel 0 is the current bus */ - g_current_bus = 0; - i2c = get_base_i2c(); + i2c = get_base_i2c(adap->hwadapnr); /* * In case the previous transfer is still going, wait to give it a @@ -505,6 +469,10 @@ void i2c_init(int speed, int slaveadd) } #endif /* #if !(defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5) */ i2c_ch_init(i2c, speed, slaveadd); + + bus = &i2c_bus[adap->hwadapnr]; + bus->active = true; + bus->regs = i2c; } /* @@ -728,6 +696,29 @@ static int hsi2c_read(struct exynos5_hsi2c *i2c, return rv; } +static unsigned int s3c24x0_i2c_set_bus_speed(struct i2c_adapter *adap, + unsigned int speed) +{ + struct s3c24x0_i2c_bus *i2c_bus; + + i2c_bus = get_bus(adap->hwadapnr); + if (!i2c_bus) + return -1; + + i2c_bus->clock_frequency = speed; + + if (i2c_bus->is_highspeed) { + if (hsi2c_get_clk_details(i2c_bus)) + return -1; + hsi2c_ch_init(i2c_bus); + } else { + i2c_ch_init(i2c_bus->regs, i2c_bus->clock_frequency, + CONFIG_SYS_I2C_S3C24X0_SLAVE); + } + + return 0; +} + /* * cmd_type is 0 for write, 1 for read. * @@ -840,13 +831,13 @@ bailout: return result; } -int i2c_probe(uchar chip) +static int s3c24x0_i2c_probe(struct i2c_adapter *adap, uchar chip) { struct s3c24x0_i2c_bus *i2c_bus; uchar buf[1]; int ret; - i2c_bus = get_bus(g_current_bus); + i2c_bus = get_bus(adap->hwadapnr); if (!i2c_bus) return -1; buf[0] = 0; @@ -864,11 +855,11 @@ int i2c_probe(uchar chip) I2C_READ, chip << 1, 0, 0, buf, 1); } - return ret != I2C_OK; } -int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) +static int s3c24x0_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr, + int alen, uchar *buffer, int len) { struct s3c24x0_i2c_bus *i2c_bus; uchar xaddr[4]; @@ -902,7 +893,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW); #endif - i2c_bus = get_bus(g_current_bus); + i2c_bus = get_bus(adap->hwadapnr); if (!i2c_bus) return -1; @@ -922,7 +913,8 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) return 0; } -int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) +static int s3c24x0_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr, + int alen, uchar *buffer, int len) { struct s3c24x0_i2c_bus *i2c_bus; uchar xaddr[4]; @@ -955,7 +947,7 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW); #endif - i2c_bus = get_bus(g_current_bus); + i2c_bus = get_bus(adap->hwadapnr); if (!i2c_bus) return -1; @@ -1001,8 +993,8 @@ static void process_nodes(const void *blob, int node_list[], int count, bus->id = pinmux_decode_periph_id(blob, node); bus->clock_frequency = fdtdec_get_int(blob, node, - "clock-frequency", - CONFIG_SYS_I2C_SPEED); + "clock-frequency", + CONFIG_SYS_I2C_S3C24X0_SPEED); bus->node = node; bus->bus_num = i; exynos_pinmux_config(bus->id, 0); @@ -1044,7 +1036,6 @@ int i2c_get_bus_num_fdt(int node) return -1; } -#ifdef CONFIG_I2C_MULTI_BUS int i2c_reset_port_fdt(const void *blob, int node) { struct s3c24x0_i2c_bus *i2c_bus; @@ -1068,12 +1059,61 @@ int i2c_reset_port_fdt(const void *blob, int node) hsi2c_ch_init(i2c_bus); } else { i2c_ch_init(i2c_bus->regs, i2c_bus->clock_frequency, - CONFIG_SYS_I2C_SLAVE); + CONFIG_SYS_I2C_S3C24X0_SLAVE); } return 0; } #endif -#endif -#endif /* CONFIG_HARD_I2C */ +/* + * Register s3c24x0 i2c adapters + */ +U_BOOT_I2C_ADAP_COMPLETE(s3c24x0_0, s3c24x0_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, + 0) +U_BOOT_I2C_ADAP_COMPLETE(s3c24x0_1, s3c24x0_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, + 1) +U_BOOT_I2C_ADAP_COMPLETE(s3c24x0_2, s3c24x0_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, + 2) +U_BOOT_I2C_ADAP_COMPLETE(s3c24x0_3, s3c24x0_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, + 3) +U_BOOT_I2C_ADAP_COMPLETE(s3c24x0_4, s3c24x0_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, + 4) +U_BOOT_I2C_ADAP_COMPLETE(s3c24x0_5, s3c24x0_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, + 5) +U_BOOT_I2C_ADAP_COMPLETE(s3c24x0_6, s3c24x0_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, + 6) +U_BOOT_I2C_ADAP_COMPLETE(s3c24x0_7, s3c24x0_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, + 7) diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index 79a6079370..57b620d481 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -73,12 +73,12 @@ * the MPL VCMA9 is equipped with an ATMEL 24C256 EEPROM at * address 0x50 with 16bit addressing */ -#define CONFIG_HARD_I2C /* I2C with hardware support */ -#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed */ -#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave addr */ +#define CONFIG_SYS_I2C /* we use the built-in I2C controller */ -#define CONFIG_DRIVER_S3C24X0_I2C +#define CONFIG_SYS_I2C_S3C24X0 +#define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 /* I2C speed */ +#define CONFIG_SYS_I2C_S3C24X0_SLAVE 0x7F /* I2C slave addr */ #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 diff --git a/include/configs/arndale.h b/include/configs/arndale.h index 45fa047b35..ea8753b544 100644 --- a/include/configs/arndale.h +++ b/include/configs/arndale.h @@ -214,13 +214,12 @@ /* I2C */ #define CONFIG_SYS_I2C_INIT_BOARD -#define CONFIG_HARD_I2C +#define CONFIG_SYS_I2C #define CONFIG_CMD_I2C -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 Kbps */ -#define CONFIG_DRIVER_S3C24X0_I2C -#define CONFIG_I2C_MULTI_BUS +#define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 /* 100 Kbps */ +#define CONFIG_SYS_I2C_S3C24X0 #define CONFIG_MAX_I2C_NUM 8 -#define CONFIG_SYS_I2C_SLAVE 0x0 +#define CONFIG_SYS_I2C_S3C24X0_SLAVE 0x0 #define CONFIG_I2C_EDID /* PMIC */ diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h index bdefee108d..0155322a31 100644 --- a/include/configs/exynos5250-dt.h +++ b/include/configs/exynos5250-dt.h @@ -249,13 +249,13 @@ /* I2C */ #define CONFIG_SYS_I2C_INIT_BOARD -#define CONFIG_HARD_I2C +#define CONFIG_SYS_I2C #define CONFIG_CMD_I2C -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 Kbps */ -#define CONFIG_DRIVER_S3C24X0_I2C +#define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 /* 100 Kbps */ +#define CONFIG_SYS_I2C_S3C24X0 #define CONFIG_I2C_MULTI_BUS #define CONFIG_MAX_I2C_NUM 8 -#define CONFIG_SYS_I2C_SLAVE 0x0 +#define CONFIG_SYS_I2C_S3C24X0_SLAVE 0x0 #define CONFIG_I2C_EDID /* PMIC */ diff --git a/include/configs/trats.h b/include/configs/trats.h index 3d080c4d19..f163303142 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -16,6 +16,7 @@ */ #define CONFIG_SAMSUNG /* in a SAMSUNG core */ #define CONFIG_S5P /* which is in a S5P Family */ +#define CONFIG_EXYNOS4 /* which is in a EXYNOS4XXX */ #define CONFIG_EXYNOS4210 /* which is in a EXYNOS4210 */ #define CONFIG_TRATS /* working with TRATS */ #define CONFIG_TIZEN /* TIZEN lib */ @@ -268,31 +269,21 @@ #define CONFIG_SYS_CACHELINE_SIZE 32 #define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_S3C24X0 +#define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 +#define CONFIG_SYS_I2C_S3C24X0_SLAVE 0xFE +#define CONFIG_MAX_I2C_NUM 8 #define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ #define CONFIG_SYS_I2C_SOFT_SPEED 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE -#define I2C_SOFT_DECLARATIONS2 -#define CONFIG_SYS_I2C_SOFT_SPEED_2 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE_2 0x7F +#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F #define CONFIG_SOFT_I2C_READ_REPEATED_START #define CONFIG_SYS_I2C_INIT_BOARD -#define CONFIG_I2C_MULTI_BUS -#define CONFIG_SOFT_I2C_MULTI_BUS -#define CONFIG_SYS_MAX_I2C_BUS 15 #include -/* I2C PMIC */ -#define CONFIG_SOFT_I2C_I2C5_SCL exynos4_gpio_part1_get_nr(b, 7) -#define CONFIG_SOFT_I2C_I2C5_SDA exynos4_gpio_part1_get_nr(b, 6) - /* I2C FG */ -#define CONFIG_SOFT_I2C_I2C9_SCL exynos4_gpio_part2_get_nr(y4, 1) -#define CONFIG_SOFT_I2C_I2C9_SDA exynos4_gpio_part2_get_nr(y4, 0) - -#define CONFIG_SOFT_I2C_GPIO_SCL get_multi_scl_pin() -#define CONFIG_SOFT_I2C_GPIO_SDA get_multi_sda_pin() -#define I2C_INIT multi_i2c_init() +#define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_part2_get_nr(y4, 1) +#define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_part2_get_nr(y4, 0) #define CONFIG_POWER #define CONFIG_POWER_I2C diff --git a/include/configs/trats2.h b/include/configs/trats2.h index 0e93836c0c..3bcdfb140c 100644 --- a/include/configs/trats2.h +++ b/include/configs/trats2.h @@ -260,30 +260,25 @@ #include #define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ +#define CONFIG_SYS_I2C_S3C24X0 +#define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 +#define CONFIG_SYS_I2C_S3C24X0_SLAVE 0 +#define CONFIG_MAX_I2C_NUM 8 +#define CONFIG_SYS_I2C_SOFT #define CONFIG_SYS_I2C_SOFT_SPEED 50000 #define CONFIG_SYS_I2C_SOFT_SLAVE 0x00 #define I2C_SOFT_DECLARATIONS2 #define CONFIG_SYS_I2C_SOFT_SPEED_2 50000 #define CONFIG_SYS_I2C_SOFT_SLAVE_2 0x00 -#define I2C_SOFT_DECLARATIONS3 -#define CONFIG_SYS_I2C_SOFT_SPEED_3 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE_3 0x00 #define CONFIG_SOFT_I2C_READ_REPEATED_START #define CONFIG_SYS_I2C_INIT_BOARD -#define CONFIG_I2C_MULTI_BUS -#define CONFIG_SOFT_I2C_MULTI_BUS -#define CONFIG_SYS_MAX_I2C_BUS 15 - -#define CONFIG_SOFT_I2C_I2C5_SCL exynos4x12_gpio_part1_get_nr(d0, 3) -#define CONFIG_SOFT_I2C_I2C5_SDA exynos4x12_gpio_part1_get_nr(d0, 2) -#define CONFIG_SOFT_I2C_I2C9_SCL exynos4x12_gpio_part1_get_nr(f1, 4) -#define CONFIG_SOFT_I2C_I2C9_SDA exynos4x12_gpio_part1_get_nr(f1, 5) -#define CONFIG_SOFT_I2C_I2C10_SCL exynos4x12_gpio_part2_get_nr(m2, 1) -#define CONFIG_SOFT_I2C_I2C10_SDA exynos4x12_gpio_part2_get_nr(m2, 0) -#define CONFIG_SOFT_I2C_GPIO_SCL get_multi_scl_pin() -#define CONFIG_SOFT_I2C_GPIO_SDA get_multi_sda_pin() -#define I2C_INIT multi_i2c_init() + +#ifndef __ASSEMBLY__ +int get_soft_i2c_scl_pin(void); +int get_soft_i2c_sda_pin(void); +#endif +#define CONFIG_SOFT_I2C_GPIO_SCL get_soft_i2c_scl_pin() +#define CONFIG_SOFT_I2C_GPIO_SDA get_soft_i2c_sda_pin() /* POWER */ #define CONFIG_POWER