From: Albin Tonnerre Date: Thu, 20 Aug 2009 14:04:49 +0000 (+0200) Subject: Support for the Calao TNY-A9260/TNY-A9G20 boards X-Git-Tag: v2009.11-rc1~183^2~7 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=2dc851e3b0f07a56f83060f13882ff4b62cf5112;p=u-boot Support for the Calao TNY-A9260/TNY-A9G20 boards The Calao TNY-A9260 and TNY-9G20 are boards manufactured and sold by Calao Systems . Their components are very similar to the AT91SAM9260EK board, so their configuration is based on the configuration of this board. There are however some differences: different clocks, no LCD, no ethernet. They also can use SPI EEPROM to store the environment. Signed-off-by: Albin Tonnerre Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- diff --git a/MAINTAINERS b/MAINTAINERS index a971b2fe33..e4f3dee83c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -693,6 +693,8 @@ Andrea Scian Albin Tonnerre sbc35_a9g20 ARM926EJS (AT91SAM9G20 SoC) + tny_a9260 ARM926EJS (AT91SAM9260 SoC) + tny_a9g20 ARM926EJS (AT91SAM9G20 SoC) Greg Ungerer diff --git a/MAKEALL b/MAKEALL index aeca193acb..03e8b7a205 100755 --- a/MAKEALL +++ b/MAKEALL @@ -613,7 +613,9 @@ LIST_at91=" \ m501sk \ pm9261 \ pm9263 \ - SBC35_A9G20 \ + SBC35_A9G20 \ + TNY_A9260 \ + TNY_A9G20 \ " ######################################################################### diff --git a/Makefile b/Makefile index ee464eb83d..9d14210cb5 100644 --- a/Makefile +++ b/Makefile @@ -2904,6 +2904,16 @@ SBC35_A9G20_config : unconfig @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h @$(MKCONFIG) -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91 +TNY_A9G20_NANDFLASH_config \ +TNY_A9G20_EEPROM_config \ +TNY_A9G20_config \ +TNY_A9260_NANDFLASH_config \ +TNY_A9260_EEPROM_config \ +TNY_A9260_config : unconfig + @mkdir -p $(obj)include + @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h + @$(MKCONFIG) -a tny_a9260 arm arm926ejs tny_a9260 calao at91 + ######################################################################## ## ARM Integrator boards - see doc/README-integrator for more info. integratorap_config \ diff --git a/board/calao/tny_a9260/Makefile b/board/calao/tny_a9260/Makefile new file mode 100644 index 0000000000..21f5ed1006 --- /dev/null +++ b/board/calao/tny_a9260/Makefile @@ -0,0 +1,55 @@ +# +# (C) Copyright 2003-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Stelian Pop +# Lead Tech Design +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y += tny_a9260.o +COBJS-$(CONFIG_ATMEL_SPI) += spi.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/calao/tny_a9260/config.mk b/board/calao/tny_a9260/config.mk new file mode 100644 index 0000000000..ff2cfd170b --- /dev/null +++ b/board/calao/tny_a9260/config.mk @@ -0,0 +1 @@ +TEXT_BASE = 0x23f00000 diff --git a/board/calao/tny_a9260/spi.c b/board/calao/tny_a9260/spi.c new file mode 100644 index 0000000000..2db9f84aab --- /dev/null +++ b/board/calao/tny_a9260/spi.c @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2009 + * Albin Tonnerre, Free Electrons + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +#define TNY_A9260_CS_PIN AT91_PIN_PC11 + +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + return bus == 0 && cs == 1; +} + +void spi_cs_activate(struct spi_slave *slave) +{ + at91_set_gpio_value(TNY_A9260_CS_PIN, 0); +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + at91_set_gpio_value(TNY_A9260_CS_PIN, 1); +} + +void spi_init_f(void) +{ + /* everything done in board_init */ +} diff --git a/board/calao/tny_a9260/tny_a9260.c b/board/calao/tny_a9260/tny_a9260.c new file mode 100644 index 0000000000..d51ca150cc --- /dev/null +++ b/board/calao/tny_a9260/tny_a9260.c @@ -0,0 +1,110 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop + * Lead Tech Design + * + * Copyright (C) 2009 + * Albin Tonnerre, Free Electrons + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +/* ------------------------------------------------------------------------- */ +/* + * Miscelaneous platform dependent initialisations + */ + +static void tny_a9260_nand_hw_init(void) +{ + unsigned long csa; + + /* Enable CS3 */ + csa = at91_sys_read(AT91_MATRIX_EBICSA); + at91_sys_write(AT91_MATRIX_EBICSA, + csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); + + /* Configure SMC CS3 for NAND/SmartMedia */ + at91_sys_write(AT91_SMC_SETUP(3), + AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) | + AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0)); + at91_sys_write(AT91_SMC_PULSE(3), + AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) | + AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3)); + at91_sys_write(AT91_SMC_CYCLE(3), + AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5)); + at91_sys_write(AT91_SMC_MODE(3), + AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_EXNWMODE_DISABLE | +#ifdef CONFIG_SYS_NAND_DBW_16 + AT91_SMC_DBW_16 | +#else /* CONFIG_SYS_NAND_DBW_8 */ + AT91_SMC_DBW_8 | +#endif + AT91_SMC_TDF_(2)); + + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC); + + /* Configure RDY/BSY */ + at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); + + /* Enable NandFlash */ + at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); +} + +int board_init(void) +{ + /* Enable Ctrlc */ + console_init_f(); + +#if defined(CONFIG_TNY_A9260) + gd->bd->bi_arch_number = MACH_TYPE_TNY_A9260; +#elif defined(CONFIG_TNY_A9G20) + gd->bd->bi_arch_number = MACH_TYPE_TNY_A9G20; +#endif + /* adress of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + at91_serial_hw_init(); + tny_a9260_nand_hw_init(); + at91_spi0_hw_init(1 << 5); + return 0; +} + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM; + if(get_ram_size((long *) PHYS_SDRAM, PHYS_SDRAM_SIZE) != PHYS_SDRAM_SIZE) + return -1; + + gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; + return 0; +} diff --git a/include/configs/tny_a9260.h b/include/configs/tny_a9260.h new file mode 100644 index 0000000000..4ad081b0ba --- /dev/null +++ b/include/configs/tny_a9260.h @@ -0,0 +1,172 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop + * Lead Tech Design + * + * Copyright (C) 2009 + * Albin Tonnerre, Free Electrons + * + * Configuation settings for the Calao TNY-A9260 and TNY-A9G20 boards + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#if defined(CONFIG_TNY_A9260_NANDFLASH) || defined(CONFIG_TNY_A9260_EEPROM) +#define CONFIG_TNY_A9260 +#elif defined(CONFIG_TNY_A9G20_NANDFLASH) || defined(CONFIG_TNY_A9G20_EEPROM) +#define CONFIG_TNY_A9G20 +#endif + +#ifdef CONFIG_TNY_A9260 +#define CONFIG_AT91SAM9260 +#else +#define CONFIG_AT91SAM9G20 +#endif + +#if defined(CONFIG_TNY_A9260_NANDFLASH) || defined(CONFIG_TNY_A9G20_NANDFLASH) +#define CONFIG_ENV_IS_IN_NAND +#else +#define CONFIG_ENV_IS_IN_EEPROM +#endif + +/* ARM asynchronous clock */ +#define AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */ +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ +#define CONFIG_ARCH_CPU_INIT +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SKIP_RELOCATE_UBOOT + +/* + * Hardware drivers + */ +#define CONFIG_ATMEL_USART 1 +#undef CONFIG_USART0 +#undef CONFIG_USART1 +#undef CONFIG_USART2 +#define CONFIG_USART3 1 /* USART 3 is DBGU */ + +#define CONFIG_BOOTDELAY 3 + +/* + * Command line configuration. + */ +#include +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_SOURCE +#undef CONFIG_CMD_USB + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM 0x20000000 +#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ + +/* SPI EEPROM */ +#define CONFIG_SPI +#define CONFIG_CMD_SPI +#define CONFIG_ATMEL_SPI +#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) + +#define CONFIG_CMD_EEPROM +#define CONFIG_SPI_M95XXX +#define CONFIG_SYS_EEPROM_SIZE 0x10000 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 + +/* NAND flash */ +#define CONFIG_CMD_NAND +#define CONFIG_NAND_ATMEL +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_DBW_8 1 +/* our ALE is AD21 */ +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +/* our CLE is AD22 */ +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 + +/* NOR flash - no real flash on this board */ +#define CONFIG_SYS_NO_FLASH 1 + +#define CONFIG_DOS_PARTITION 1 +#define CONFIG_CMD_FAT 1 + +#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ + +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM +#define CONFIG_SYS_MEMTEST_END 0x23e00000 + +/* Env in EEPROM, bootstrap + u-boot in NAND*/ +#ifdef CONFIG_ENV_IS_IN_EEPROM +#define CONFIG_ENV_OFFSET 0x20 +#define CONFIG_ENV_SIZE 0x1000 +#endif + +/* Env, bootstrap and u-boot in NAND */ +#ifdef CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0x60000 +#define CONFIG_ENV_OFFSET_REDUND 0x80000 +#define CONFIG_ENV_SIZE 0x20000 +#endif + +#define CONFIG_BOOTCOMMAND "nboot 0x21000000 0 400000" +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "root=/dev/mtdblock1 " \ + "mtdparts=atmel_nand:16M(kernel)ro," \ + "120M(rootfs),-(other) " \ + "rw rootfstype=jffs2" + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } + +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LONGHELP 1 +#define CONFIG_CMDLINE_EDITING 1 + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ + +#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ + +#ifdef CONFIG_USE_IRQ +#error CONFIG_USE_IRQ not supported +#endif + +#endif