From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Mon, 28 Feb 2011 19:40:44 +0000 (+0100)
Subject: jlink: add new PID and VID
X-Git-Tag: v0.5.0-rc1~159
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=2ed3f5554768791d29e017825a8866677ed4a533;p=openocd

jlink: add new PID and VID

The default pid of the segger is 0x0101
But when you change the USB Address it will also

pid = ( usb_address > 0x4) ? 0x0101 : (0x101 + usb_address)

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---

diff --git a/src/jtag/drivers/jlink.c b/src/jtag/drivers/jlink.c
index bc5448d5..f1b97115 100644
--- a/src/jtag/drivers/jlink.c
+++ b/src/jtag/drivers/jlink.c
@@ -37,8 +37,14 @@
 http://www.segger.com/cms/admin/uploads/productDocs/RM08001_JLinkUSBProtocol.pdf
  */
 
-#define VID 0x1366
-#define PID 0x0101
+/*
+ * The default pid of the segger is 0x0101
+ * But when you change the USB Address it will also
+ *
+ * pid = ( usb_address > 0x4) ? 0x0101 : (0x101 + usb_address)
+ */
+#define VID 0x1366, 0x1366, 0x1366, 0x1366
+#define PID 0x0101, 0x0102, 0x0103, 0x0104
 
 #define JLINK_WRITE_ENDPOINT	0x02
 #define JLINK_READ_ENDPOINT		0x81