From: Stephen Warren Date: Thu, 15 Sep 2016 18:19:37 +0000 (-0600) Subject: ARM: tegra: fix USB ULPI PHY reset signal inversion confusion X-Git-Tag: v2016.11-rc1~34^2~3 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=2f6a7e8ce5df8b99d84bfd486c6f99d92322ce04;p=u-boot ARM: tegra: fix USB ULPI PHY reset signal inversion confusion USB ULPI PHY reset signals are typically active low. Consequently, they should be marked as GPIO_ACTIVE_LOW in device tree, and indeed they are in the Linux kernel DTs, and in DT properties that U-Boot doesn't yet use. However, in DT properties that U-Boot does use, the value has been set to 0 (== GPIO_ACTIVE_HIGH) to work around a bug in U-Boot. This change fixes the DT to correctly represent the HW, and fixes the Tegra USB driver to cope with the fact that dm_gpio_set_value() internally handles any inversions implied by the DT value GPIO_ACTIVE_LOW. Cc: Marcel Ziswiler Signed-off-by: Stephen Warren Reviewed-by: Simon Glass Signed-off-by: Tom Warren --- diff --git a/arch/arm/dts/tegra20-colibri.dts b/arch/arm/dts/tegra20-colibri.dts index a291d93c7d..777f63e5bd 100644 --- a/arch/arm/dts/tegra20-colibri.dts +++ b/arch/arm/dts/tegra20-colibri.dts @@ -39,7 +39,8 @@ usb@c5004000 { statuc = "okay"; /* VBUS_LAN */ - nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>; + nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) + GPIO_ACTIVE_LOW>; nvidia,vbus-gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/dts/tegra20-harmony.dts b/arch/arm/dts/tegra20-harmony.dts index cace743394..5aec150b5e 100644 --- a/arch/arm/dts/tegra20-harmony.dts +++ b/arch/arm/dts/tegra20-harmony.dts @@ -626,7 +626,8 @@ usb@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) 0>; + nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) + GPIO_ACTIVE_LOW>; }; usb-phy@c5004000 { diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index eb54df471d..e3620da15f 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -600,9 +600,18 @@ static int init_ulpi_usb_controller(struct fdt_usb *config, /* reset ULPI phy */ if (dm_gpio_is_valid(&config->phy_reset_gpio)) { - dm_gpio_set_value(&config->phy_reset_gpio, 0); - mdelay(5); + /* + * This GPIO is typically active-low, and marked as such in + * device tree. dm_gpio_set_value() takes this into account + * and inverts the value we pass here if required. In other + * words, this first call logically asserts the reset signal, + * which typically results in driving the physical GPIO low, + * and the second call logically de-asserts the reset signal, + * which typically results in driver the GPIO high. + */ dm_gpio_set_value(&config->phy_reset_gpio, 1); + mdelay(5); + dm_gpio_set_value(&config->phy_reset_gpio, 0); } /* Reset the usb controller */