From: Mike Frysinger Date: Tue, 21 Sep 2010 23:47:27 +0000 (-0400) Subject: Blackfin: bf526-ezbrd: enable BootROM-OOB layout when booting from NAND X-Git-Tag: v2010.12-rc1~169^2~8 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=301e66a956db6401f4f008a1667b12d2546b1e7b;p=u-boot Blackfin: bf526-ezbrd: enable BootROM-OOB layout when booting from NAND We need to use the Blackfin BootROM-specific OOB layout when we boot out of NAND as that is what the on-chip ROM expects. Also need to increase the monitor size a little to accommodate the extra NAND code overhead. Signed-off-by: Mike Frysinger --- diff --git a/include/configs/bf526-ezbrd.h b/include/configs/bf526-ezbrd.h index eeca9caf8b..4c30c25392 100644 --- a/include/configs/bf526-ezbrd.h +++ b/include/configs/bf526-ezbrd.h @@ -52,7 +52,7 @@ #define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_15 | B1RAT_15 | B1HT_3 | B1RDYPOL | B0WAT_15 | B0RAT_15 | B0HT_3 | B0RDYPOL) #define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_15 | B3RAT_15 | B3HT_3 | B3RDYPOL | B2WAT_15 | B2RAT_15 | B2HT_3 | B2RDYPOL) -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MONITOR_LEN (768 * 1024) #define CONFIG_SYS_MALLOC_LEN (512 * 1024) @@ -61,7 +61,8 @@ * (can't be used same time as ethernet) */ #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND) -#define CONFIG_BFIN_NFC +# define CONFIG_BFIN_NFC +# define CONFIG_BFIN_NFC_BOOTROM_ECC #endif #ifdef CONFIG_BFIN_NFC #define CONFIG_BFIN_NFC_CTL_VAL 0x0033