From: Jörg Krause Date: Thu, 26 Mar 2015 22:53:11 +0000 (+0100) Subject: ARM: mxs: Get boot mode from OCRAM X-Git-Tag: v2015.07-rc1~63^2~49 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=32f9ef3e2ba813ea541f08c551b9188ef4749307;p=u-boot ARM: mxs: Get boot mode from OCRAM Reading the boot mode pins after power-up does not necessarily represent the boot mode used by the ROM loader. For example the state of a pin may have changed because a recovery switch which was pressed to enter USB mode is already released after plugging in USB. The ROM loader stores the value a fixed address in OCRAM. Use this value instead of reading the boot map pins. The GLOBAL_BOOT_MODE_ADDR for i.MX28 is taken from an U-Boot patch for the MX28EVK: http://repository.timesys.com/buildsources/u/u-boot/u-boot-2009.08/u-boot-2009.08-mx28-201012211513.patch Leave the boot mode detection for the i.MX23 untouched. Someone has to test whether the i.MX ROM loader does also store the boot mode in OCRAM and if the address match. This patch superseeds my incorrect patch: ARM: mxs: get boot mode from OTP http://patchwork.ozlabs.org/patch/454930/ Signed-off-by: Jörg Krause Cc: Stefano Babic --- diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c index d7956e57de..eb8669bb2e 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c @@ -49,13 +49,6 @@ static const iomux_cfg_t iomux_boot[] = { MX23_PAD_LCD_D03__GPIO_1_3 | MUX_CONFIG_BOOTMODE_PAD, MX23_PAD_LCD_D04__GPIO_1_4 | MUX_CONFIG_BOOTMODE_PAD, MX23_PAD_LCD_D05__GPIO_1_5 | MUX_CONFIG_BOOTMODE_PAD, -#elif defined(CONFIG_MX28) - MX28_PAD_LCD_D00__GPIO_1_0 | MUX_CONFIG_BOOTMODE_PAD, - MX28_PAD_LCD_D01__GPIO_1_1 | MUX_CONFIG_BOOTMODE_PAD, - MX28_PAD_LCD_D02__GPIO_1_2 | MUX_CONFIG_BOOTMODE_PAD, - MX28_PAD_LCD_D03__GPIO_1_3 | MUX_CONFIG_BOOTMODE_PAD, - MX28_PAD_LCD_D04__GPIO_1_4 | MUX_CONFIG_BOOTMODE_PAD, - MX28_PAD_LCD_D05__GPIO_1_5 | MUX_CONFIG_BOOTMODE_PAD, #endif }; @@ -65,10 +58,10 @@ static uint8_t mxs_get_bootmode_index(void) int i; uint8_t masked; +#if defined(CONFIG_MX23) /* Setup IOMUX of bootmode pads to GPIO */ mxs_iomux_setup_multiple_pads(iomux_boot, ARRAY_SIZE(iomux_boot)); -#if defined(CONFIG_MX23) /* Setup bootmode pins as GPIO input */ gpio_direction_input(MX23_PAD_LCD_D00__GPIO_1_0); gpio_direction_input(MX23_PAD_LCD_D01__GPIO_1_1); @@ -83,21 +76,11 @@ static uint8_t mxs_get_bootmode_index(void) bootmode |= (gpio_get_value(MX23_PAD_LCD_D03__GPIO_1_3) ? 1 : 0) << 3; bootmode |= (gpio_get_value(MX23_PAD_LCD_D05__GPIO_1_5) ? 1 : 0) << 5; #elif defined(CONFIG_MX28) - /* Setup bootmode pins as GPIO input */ - gpio_direction_input(MX28_PAD_LCD_D00__GPIO_1_0); - gpio_direction_input(MX28_PAD_LCD_D01__GPIO_1_1); - gpio_direction_input(MX28_PAD_LCD_D02__GPIO_1_2); - gpio_direction_input(MX28_PAD_LCD_D03__GPIO_1_3); - gpio_direction_input(MX28_PAD_LCD_D04__GPIO_1_4); - gpio_direction_input(MX28_PAD_LCD_D05__GPIO_1_5); - - /* Read bootmode pads */ - bootmode |= (gpio_get_value(MX28_PAD_LCD_D00__GPIO_1_0) ? 1 : 0) << 0; - bootmode |= (gpio_get_value(MX28_PAD_LCD_D01__GPIO_1_1) ? 1 : 0) << 1; - bootmode |= (gpio_get_value(MX28_PAD_LCD_D02__GPIO_1_2) ? 1 : 0) << 2; - bootmode |= (gpio_get_value(MX28_PAD_LCD_D03__GPIO_1_3) ? 1 : 0) << 3; - bootmode |= (gpio_get_value(MX28_PAD_LCD_D04__GPIO_1_4) ? 1 : 0) << 4; - bootmode |= (gpio_get_value(MX28_PAD_LCD_D05__GPIO_1_5) ? 1 : 0) << 5; + /* The global boot mode will be detected by ROM code and its value + * is stored at the fixed address 0x00019BF0 in OCRAM. + */ +#define GLOBAL_BOOT_MODE_ADDR 0x00019BF0 + bootmode = __raw_readl(GLOBAL_BOOT_MODE_ADDR); #endif for (i = 0; i < ARRAY_SIZE(mxs_boot_modes); i++) {