From: Jan Dakinevich Date: Mon, 27 Feb 2012 20:51:12 +0000 (+0400) Subject: jtag: basic support for P&E Micro OSBDM (aka OSJTAG) adapter X-Git-Tag: v0.6.0-rc1~193 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=34d1f82c753982d048dc3fbb73066fc445735b04;p=openocd jtag: basic support for P&E Micro OSBDM (aka OSJTAG) adapter This driver provides support for the P&E Micro OSBDM adapter (sometimes named as OSJTAG), mounted on the Freescale TWRK60N512 bord. Thus, it provides a quick start when working with this board. The driver doesn't use BDM commands, but work with OSBDM adapter using only JTAG commands. Change-Id: Ibc3779538e666e07651d3136431e5d44344f3b07 Signed-off-by: Jan Dakinevich Reviewed-on: http://openocd.zylin.com/492 Tested-by: jenkins Reviewed-by: Tomas Frydrych Reviewed-by: Spencer Oliver --- diff --git a/configure.ac b/configure.ac index ffab637c..0b337129 100644 --- a/configure.ac +++ b/configure.ac @@ -478,6 +478,10 @@ AC_ARG_ENABLE([stlink], AS_HELP_STRING([--enable-stlink], [Enable building support for the ST-Link JTAG Programmer]), [build_stlink=$enableval], [build_stlink=no]) +AC_ARG_ENABLE([osbdm], + AS_HELP_STRING([--enable-osbdm], [Enable building support for the OSBDM (JTAG only) Programmer]), + [build_osbdm=$enableval], [build_osbdm=no]) + AC_ARG_ENABLE([minidriver_dummy], AS_HELP_STRING([--enable-minidriver-dummy], [Enable the dummy minidriver.]), [build_minidriver_dummy=$enableval], [build_minidriver_dummy=no]) @@ -783,6 +787,12 @@ else AC_DEFINE(BUILD_STLINK, 0, [0 if you don't want the ST-Link JTAG driver.]) fi +if test $build_osbdm = yes; then + AC_DEFINE(BUILD_OSBDM, 1, [1 if you want the OSBDM driver.]) +else + AC_DEFINE(BUILD_OSBDM, 0, [0 if you don't want the OSBDM driver.]) +fi + if test "$use_internal_jimtcl" = yes; then if test -f "$srcdir/jimtcl/configure.ac"; then AX_CONFIG_SUBDIR_OPTION([jimtcl], [--disable-install-jim]) @@ -1069,7 +1079,7 @@ fi # Check for libusb1 ported drivers. build_usb_ng=no -if test $build_jlink = yes -o $build_stlink = yes; then +if test $build_jlink = yes -o $build_stlink = yes -o $build_osbdm = yes; then build_usb_ng=yes fi @@ -1118,6 +1128,7 @@ AM_CONDITIONAL([ARMJTAGEW], [test $build_armjtagew = yes]) AM_CONDITIONAL([REMOTE_BITBANG], [test $build_remote_bitbang = yes]) AM_CONDITIONAL([BUSPIRATE], [test $build_buspirate = yes]) AM_CONDITIONAL([STLINK], [test $build_stlink = yes]) +AM_CONDITIONAL([OSBDM], [test $build_osbdm = yes]) AM_CONDITIONAL([USB], [test $build_usb = yes]) AM_CONDITIONAL([USB_NG], [test $build_usb_ng = yes]) AM_CONDITIONAL([USE_LIBUSB0], [test $use_libusb0 = yes]) diff --git a/src/jtag/drivers/Makefile.am b/src/jtag/drivers/Makefile.am index 134323d9..459027f9 100644 --- a/src/jtag/drivers/Makefile.am +++ b/src/jtag/drivers/Makefile.am @@ -98,6 +98,9 @@ endif if STLINK DRIVERFILES += stlink_usb.c endif +if OSBDM +DRIVERFILES += osbdm.c +endif noinst_HEADERS = \ bitbang.h \ diff --git a/src/jtag/drivers/osbdm.c b/src/jtag/drivers/osbdm.c new file mode 100644 index 00000000..1875600f --- /dev/null +++ b/src/jtag/drivers/osbdm.c @@ -0,0 +1,722 @@ +/*************************************************************************** + * Copyright (C) 2012 by Jan Dakinevich * + * jan.dakinevich@gmail.com * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the * + * Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + ***************************************************************************/ +#ifdef HAVE_CONFIG_H +# include "config.h" +#endif + +#include +#include +#include +#include +#include "libusb_common.h" + +struct sequence { + int len; + void *tms; + void *tdo; + const void *tdi; + struct sequence *next; +}; + +struct queue { + struct sequence *head; + struct sequence *tail; +}; + +static struct sequence *queue_add_tail(struct queue *queue, int len) +{ + if (len <= 0) { + LOG_ERROR("BUG: sequences with zero length are not allowed"); + return NULL; + } + + struct sequence *next; + next = (struct sequence *)malloc(sizeof(*next)); + if (next) { + next->tms = calloc(1, DIV_ROUND_UP(len, 8)); + if (next->tms) { + next->len = len; + next->tdo = NULL; + next->tdi = NULL; + next->next = NULL; + + if (!queue->head) { + /* Queue is empty at the moment */ + queue->head = next; + } else { + /* Queue already contains at least one sequence */ + queue->tail->next = next; + } + + queue->tail = next; + } else { + free(next); + next = NULL; + } + } + + if (!next) + LOG_ERROR("Not enough memory"); + + return next; +} + +static void queue_drop_head(struct queue *queue) +{ + struct sequence *head = queue->head->next; /* New head */ + free(queue->head->tms); + free(queue->head); + queue->head = head; +} + +static void queue_free(struct queue *queue) +{ + if (queue) { + while (queue->head) + queue_drop_head(queue); + + free(queue); + } +} + +static struct queue *queue_alloc(void) +{ + struct queue *queue = (struct queue *)malloc(sizeof(struct queue)); + if (queue) + queue->head = NULL; + else + LOG_ERROR("Not enough memory"); + + return queue; +} + +/* Size of usb communnication buffer */ +#define OSBDM_USB_BUFSIZE 64 +/* Timeout for USB transfer, ms */ +#define OSBDM_USB_TIMEOUT 1000 +/* Write end point */ +#define OSBDM_USB_EP_WRITE 0x01 +/* Read end point */ +#define OSBDM_USB_EP_READ 0x82 + +/* Initialize OSBDM device */ +#define OSBDM_CMD_INIT 0x11 +/* Execute special, not-BDM command. But only this + * command is used for JTAG operation */ +#define OSBDM_CMD_SPECIAL 0x27 +/* Execute JTAG swap (tms/tdi -> tdo) */ +#define OSBDM_CMD_SPECIAL_SWAP 0x05 +/* Reset control */ +#define OSBDM_CMD_SPECIAL_SRST 0x01 +/* Maximum bit-length in one swap */ +#define OSBDM_SWAP_MAX (((OSBDM_USB_BUFSIZE - 6) / 5) * 16) + +/* Lists of valid VID/PID pairs + */ +static const uint16_t osbdm_vid[] = { 0x15a2, 0x15a2, 0 }; +static const uint16_t osbdm_pid[] = { 0x0042, 0x0058, 0 }; + +struct osbdm { + struct jtag_libusb_device_handle *devh; /* USB handle */ + uint8_t buffer[OSBDM_USB_BUFSIZE]; /* Data to send and recieved */ + int count; /* Count data to send and to read */ +}; + +/* osbdm instance + */ +static struct osbdm osbdm_context; + +static int osbdm_send_and_recv(struct osbdm *osbdm) +{ + /* Send request */ + int count = jtag_libusb_bulk_write(osbdm->devh, OSBDM_USB_EP_WRITE, + (char *)osbdm->buffer, osbdm->count, OSBDM_USB_TIMEOUT); + + if (count != osbdm->count) { + LOG_ERROR("OSBDM communnication error: can't write"); + return ERROR_FAIL; + } + + /* Save command code for next checking */ + uint8_t cmd_saved = osbdm->buffer[0]; + + /* Reading answer */ + osbdm->count = jtag_libusb_bulk_read(osbdm->devh, OSBDM_USB_EP_READ, + (char *)osbdm->buffer, OSBDM_USB_BUFSIZE, OSBDM_USB_TIMEOUT); + + /* Now perform basic checks for data sent by BDM device + */ + + if (osbdm->count < 0) { + LOG_ERROR("OSBDM communnication error: can't read"); + return ERROR_FAIL; + } + + if (osbdm->count < 2) { + LOG_ERROR("OSBDM communnication error: answer too small"); + return ERROR_FAIL; + } + + if (osbdm->count != osbdm->buffer[1]) { + LOG_ERROR("OSBDM communnication error: answer size mismatch"); + return ERROR_FAIL; + } + + if (cmd_saved != osbdm->buffer[0]) { + LOG_ERROR("OSBDM communnication error: answer command mismatch"); + return ERROR_FAIL; + } + + return ERROR_OK; +} + +static int osbdm_srst(struct osbdm *osbdm, int srst) +{ + osbdm->count = 0; + (void)memset(osbdm->buffer, 0, OSBDM_USB_BUFSIZE); + + /* Composing request + */ + osbdm->buffer[osbdm->count++] = OSBDM_CMD_SPECIAL; /* Command */ + osbdm->buffer[osbdm->count++] = OSBDM_CMD_SPECIAL_SRST; /* Subcommand */ + /* Length in bytes - not used */ + osbdm->buffer[osbdm->count++] = 0; + osbdm->buffer[osbdm->count++] = 0; + /* SRST state */ + osbdm->buffer[osbdm->count++] = (srst ? 0 : 0x08); + + /* Sending data + */ + if (osbdm_send_and_recv(osbdm) != ERROR_OK) + return ERROR_FAIL; + + return ERROR_OK; +} + +static int osbdm_swap(struct osbdm *osbdm, void *tms, void *tdi, + void *tdo, int length) +{ + if (length > OSBDM_SWAP_MAX) { + LOG_ERROR("BUG: bit sequence too long"); + return ERROR_FAIL; + } + + if (length <= 0) { + LOG_ERROR("BUG: bit sequence equal or less to 0"); + return ERROR_FAIL; + } + + int swap_count = DIV_ROUND_UP(length, 16); + + /* cleanup */ + osbdm->count = 0; + (void)memset(osbdm->buffer, 0, OSBDM_USB_BUFSIZE); + + /* Composing request + */ + + osbdm->buffer[osbdm->count++] = OSBDM_CMD_SPECIAL; /* Command */ + osbdm->buffer[osbdm->count++] = OSBDM_CMD_SPECIAL_SWAP; /* Subcommand */ + /* Length in bytes - not used */ + osbdm->buffer[osbdm->count++] = 0; + osbdm->buffer[osbdm->count++] = 0; + /* Swap count */ + osbdm->buffer[osbdm->count++] = 0; + osbdm->buffer[osbdm->count++] = (uint8_t)swap_count; + + for (int bit_idx = 0; bit_idx < length; ) { + /* Bit count in swap */ + int bit_count = length - bit_idx; + if (bit_count > 16) + bit_count = 16; + + osbdm->buffer[osbdm->count++] = (uint8_t)bit_count; + + /* Copying TMS and TDI data to output buffer */ + uint32_t tms_data = buf_get_u32(tms, bit_idx, bit_count); + uint32_t tdi_data = buf_get_u32(tdi, bit_idx, bit_count); + osbdm->buffer[osbdm->count++] = (uint8_t)(tdi_data >> 8); + osbdm->buffer[osbdm->count++] = (uint8_t)tdi_data; + osbdm->buffer[osbdm->count++] = (uint8_t)(tms_data >> 8); + osbdm->buffer[osbdm->count++] = (uint8_t)tms_data; + + /* Next bit offset */ + bit_idx += bit_count; + } + + assert(osbdm->count <= OSBDM_USB_BUFSIZE); + + /* Sending data + */ + if (osbdm_send_and_recv(osbdm) != ERROR_OK) + return ERROR_FAIL; + + /* Extra check + */ + if (((osbdm->buffer[2] << 8) | osbdm->buffer[3]) != 2 * swap_count) { + LOG_ERROR("OSBDM communnication error: not proper answer to swap command"); + return ERROR_FAIL; + } + + /* Copy TDO responce + */ + uint8_t *buffer = (uint8_t *)osbdm->buffer + 4; + for (int bit_idx = 0; bit_idx < length; ) { + int bit_count = length - bit_idx; + if (bit_count > 16) + bit_count = 16; + + /* Prepare data */ + uint32_t tdo_data = 0; + tdo_data |= (*buffer++) << 8; + tdo_data |= (*buffer++); + tdo_data >>= (16 - bit_count); + + /* Copy TDO to return */ + buf_set_u32(tdo, bit_idx, bit_count, tdo_data); + + bit_idx += bit_count; + } + + return ERROR_OK; +} + +static int osbdm_flush(struct osbdm *osbdm, struct queue* queue) +{ + uint8_t tms[DIV_ROUND_UP(OSBDM_SWAP_MAX, 8)]; + uint8_t tdi[DIV_ROUND_UP(OSBDM_SWAP_MAX, 8)]; + uint8_t tdo[DIV_ROUND_UP(OSBDM_SWAP_MAX, 8)]; + + int seq_back_len = 0; + + while (queue->head) { + (void)memset(tms, 0, sizeof(tms)); + (void)memset(tdi, 0, sizeof(tdi)); + (void)memset(tdo, 0, sizeof(tdo)); + + int seq_len; + int swap_len; + struct sequence *seq; + + /* Copy from queue to tms/tdi streams + */ + seq = queue->head; + seq_len = seq_back_len; + swap_len = 0; + + while (seq && swap_len != OSBDM_SWAP_MAX) { + /* Count bit for copy at this iteration. + * len should fit into remaining space + * in tms/tdo bitstreams + */ + int len = seq->len - seq_len; + if (len > OSBDM_SWAP_MAX - swap_len) + len = OSBDM_SWAP_MAX - swap_len; + + /* Set tms data */ + buf_set_buf(seq->tms, seq_len, tms, swap_len, len); + + /* Set tdi data if they exists */ + if (seq->tdi) + buf_set_buf(seq->tdi, seq_len, tdi, swap_len, len); + + swap_len += len; + seq_len += len; + if (seq_len == seq->len) { + seq = seq->next; /* Move to next sequence */ + seq_len = 0; + } + } + + if (osbdm_swap(osbdm, tms, tdi, tdo, swap_len)) + return ERROR_FAIL; + + /* Copy from tdo stream to queue + */ + + for (int swap_back_len = 0; swap_back_len < swap_len; ) { + int len = queue->head->len - seq_back_len; + if (len > swap_len - swap_back_len) + len = swap_len - swap_back_len; + + if (queue->head->tdo) + buf_set_buf(tdo, swap_back_len, queue->head->tdo, seq_back_len, len); + + swap_back_len += len; + seq_back_len += len; + if (seq_back_len == queue->head->len) { + queue_drop_head(queue); + seq_back_len = 0; + } + } + } + + return ERROR_OK; +} + +/* Basic operation for opening USB device */ +static int osbdm_open(struct osbdm *osbdm) +{ + (void)memset(osbdm, 0, sizeof(*osbdm)); + if (jtag_libusb_open(osbdm_vid, osbdm_pid, &osbdm->devh) != ERROR_OK) + return ERROR_FAIL; + + if (jtag_libusb_claim_interface(osbdm->devh, 0) != ERROR_OK) + return ERROR_FAIL; + + return ERROR_OK; +} + +static int osbdm_quit(void) +{ + jtag_libusb_close(osbdm_context.devh); + return ERROR_OK; +} + +static int osbdm_add_pathmove( + struct queue *queue, + tap_state_t *path, + int num_states) +{ + assert(num_states <= 32); + + struct sequence *next = queue_add_tail(queue, num_states); + if (!next) { + LOG_ERROR("BUG: can't allocate bit sequence"); + return ERROR_FAIL; + } + + uint32_t tms = 0; + for (int i = 0; i < num_states; i++) { + if (tap_state_transition(tap_get_state(), 1) == path[i]) { + tms |= (1 << i); + } else if (tap_state_transition(tap_get_state(), 0) == path[i]) { + tms &= ~(1 << i); /* This line not so needed */ + } else { + LOG_ERROR("BUG: %s -> %s isn't a valid TAP state transition", + tap_state_name(tap_get_state()), + tap_state_name(path[i])); + return ERROR_FAIL; + } + + tap_set_state(path[i]); + } + + buf_set_u32(next->tms, 0, num_states, tms); + tap_set_end_state(tap_get_state()); + + return ERROR_OK; +} + +static int osbdm_add_statemove( + struct queue *queue, + tap_state_t new_state, + int skip_first) +{ + int len = 0; + int tms; + + tap_set_end_state(new_state); + if (tap_get_end_state() == TAP_RESET) { + /* Ignore current state */ + tms = 0xff; + len = 5; + } else if (tap_get_state() != tap_get_end_state()) { + tms = tap_get_tms_path(tap_get_state(), new_state); + len = tap_get_tms_path_len(tap_get_state(), new_state); + } + + if (len && skip_first) { + len--; + tms >>= 1; + } + + if (len) { + struct sequence *next = queue_add_tail(queue, len); + if (!next) { + LOG_ERROR("BUG: can't allocate bit sequence"); + return ERROR_FAIL; + } + buf_set_u32(next->tms, 0, len, tms); + } + + tap_set_state(tap_get_end_state()); + return ERROR_OK; +} + +static int osbdm_add_stableclocks( + struct queue *queue, + int count) +{ + if (!tap_is_state_stable(tap_get_state())) { + LOG_ERROR("BUG: current state (%s) is not stable", + tap_state_name(tap_get_state())); + return ERROR_FAIL; + } + + struct sequence *next = queue_add_tail(queue, count); + if (!next) { + LOG_ERROR("BUG: can't allocate bit sequence"); + return ERROR_FAIL; + } + + if (tap_get_state() == TAP_RESET) + (void)memset(next->tms, 0xff, DIV_ROUND_UP(count, 8)); + + return ERROR_OK; +} + +static int osbdm_add_tms( + struct queue *queue, + const uint8_t *tms, + int num_bits) +{ + struct sequence *next = queue_add_tail(queue, num_bits); + if (!next) { + LOG_ERROR("BUG: can't allocate bit sequence"); + return ERROR_FAIL; + } + buf_set_buf(tms, 0, next->tms, 0, num_bits); + + return ERROR_OK; +} + +static int osbdm_add_scan( + struct queue *queue, + struct scan_field *fields, + int num_fields, + tap_state_t end_state, + bool ir_scan) +{ + /* Move to desired shift state */ + if (ir_scan) { + if (tap_get_state() != TAP_IRSHIFT) { + if (osbdm_add_statemove(queue, TAP_IRSHIFT, 0) != ERROR_OK) + return ERROR_FAIL; + } + } else { + if (tap_get_state() != TAP_DRSHIFT) { + if (osbdm_add_statemove(queue, TAP_DRSHIFT, 0) != ERROR_OK) + return ERROR_FAIL; + } + } + + /* Add scan */ + tap_set_end_state(end_state); + for (int idx = 0; idx < num_fields; idx++) { + struct sequence *next = queue_add_tail(queue, fields[idx].num_bits); + if (!next) { + LOG_ERROR("Can't allocate bit sequence"); + return ERROR_FAIL; + } + + (void)memset(next->tms, 0, DIV_ROUND_UP(fields[idx].num_bits, 8)); + next->tdi = fields[idx].out_value; + next->tdo = fields[idx].in_value; + } + + /* Move to end state + */ + if (tap_get_state() != tap_get_end_state()) { + /* Exit from IRSHIFT/DRSHIFT */ + buf_set_u32(queue->tail->tms, queue->tail->len - 1, 1, 1); + + /* Move with skip_first flag */ + if (osbdm_add_statemove(queue, tap_get_end_state(), 1) != ERROR_OK) + return ERROR_FAIL; + } + + return ERROR_OK; +} + +static int osbdm_add_runtest( + struct queue *queue, + int num_cycles, + tap_state_t end_state) +{ + if (osbdm_add_statemove(queue, TAP_IDLE, 0) != ERROR_OK) + return ERROR_FAIL; + + if (osbdm_add_stableclocks(queue, num_cycles) != ERROR_OK) + return ERROR_FAIL; + + if (osbdm_add_statemove(queue, end_state, 0) != ERROR_OK) + return ERROR_FAIL; + + return ERROR_OK; +} + +static int osbdm_execute_command( + struct osbdm *osbdm, + struct queue *queue, + struct jtag_command *cmd) +{ + int retval = ERROR_OK; + + switch (cmd->type) { + case JTAG_RESET: + if (cmd->cmd.reset->trst) { + LOG_ERROR("BUG: nTRST signal is not supported"); + retval = ERROR_FAIL; + } else { + retval = osbdm_flush(osbdm, queue); + if (retval == ERROR_OK) + retval = osbdm_srst(osbdm, cmd->cmd.reset->srst); + } + break; + + case JTAG_PATHMOVE: + retval = osbdm_add_pathmove( + queue, + cmd->cmd.pathmove->path, + cmd->cmd.pathmove->num_states); + break; + + case JTAG_TLR_RESET: + retval = osbdm_add_statemove( + queue, + cmd->cmd.statemove->end_state, + 0); + break; + + case JTAG_STABLECLOCKS: + retval = osbdm_add_stableclocks( + queue, + cmd->cmd.stableclocks->num_cycles); + break; + + case JTAG_TMS: + retval = osbdm_add_tms( + queue, + cmd->cmd.tms->bits, + cmd->cmd.tms->num_bits); + break; + + case JTAG_SCAN: + retval = osbdm_add_scan( + queue, + cmd->cmd.scan->fields, + cmd->cmd.scan->num_fields, + cmd->cmd.scan->end_state, + cmd->cmd.scan->ir_scan); + break; + + case JTAG_SLEEP: + retval = osbdm_flush(osbdm, queue); + if (retval == ERROR_OK) + jtag_sleep(cmd->cmd.sleep->us); + break; + + case JTAG_RUNTEST: + retval = osbdm_add_runtest( + queue, + cmd->cmd.runtest->num_cycles, + cmd->cmd.runtest->end_state); + break; + + default: + LOG_ERROR("BUG: unknown JTAG command type encountered"); + retval = ERROR_FAIL; + break; + } + + return retval; +} + +static int osbdm_execute_queue(void) +{ + int retval = ERROR_OK; + + struct queue *queue = queue_alloc(); + if (!queue) { + LOG_ERROR("BUG: can't allocate bit queue"); + retval = ERROR_FAIL; + } else { + struct jtag_command *cmd = jtag_command_queue; + + while (retval == ERROR_OK && cmd) { + retval = osbdm_execute_command(&osbdm_context, queue, cmd); + cmd = cmd->next; + } + + if (retval == ERROR_OK) + retval = osbdm_flush(&osbdm_context, queue); + + queue_free(queue); + } + + if (retval != ERROR_OK) { + LOG_ERROR("FATAL: can't execute jtag command"); + exit(-1); + } + + return retval; +} + +static int osbdm_init(void) +{ + /* Open device */ + if (osbdm_open(&osbdm_context) != ERROR_OK) { + LOG_ERROR("Can't open OSBDM device"); + return ERROR_FAIL; + } else { + /* Device successfully opened */ + LOG_INFO("OSBDM has opened"); + } + + /* Perform initialize command */ + osbdm_context.count = 0; + osbdm_context.buffer[osbdm_context.count++] = OSBDM_CMD_INIT; + if (osbdm_send_and_recv(&osbdm_context) != ERROR_OK) + return ERROR_FAIL; + + return ERROR_OK; +} + +static int osbdm_khz(int khz, int *speed) +{ + *speed = khz; + return ERROR_OK; +} + +static int osbdm_speed(int speed) +{ + return ERROR_OK; +} + +static int osbdm_speed_div(int speed, int *khz) +{ + *khz = speed; + return ERROR_OK; +} + +struct jtag_interface osbdm_interface = { + .name = "osbdm", + + .transports = jtag_only, + .execute_queue = osbdm_execute_queue, + + .khz = osbdm_khz, + .speed = osbdm_speed, + .speed_div = osbdm_speed_div, + + .init = osbdm_init, + .quit = osbdm_quit +}; diff --git a/src/jtag/interfaces.c b/src/jtag/interfaces.c index 304dab62..4937adba 100644 --- a/src/jtag/interfaces.c +++ b/src/jtag/interfaces.c @@ -104,6 +104,9 @@ extern struct jtag_interface remote_bitbang_interface; #if BUILD_STLINK == 1 extern struct jtag_interface stlink_interface; #endif +#if BUILD_OSBDM == 1 +extern struct jtag_interface osbdm_interface; +#endif #endif /* standard drivers */ /** @@ -176,6 +179,9 @@ struct jtag_interface *jtag_interfaces[] = { #if BUILD_STLINK == 1 &stlink_interface, #endif +#if BUILD_OSBDM == 1 + &osbdm_interface, +#endif #endif /* standard drivers */ NULL, }; diff --git a/tcl/board/twr-k60n512.cfg b/tcl/board/twr-k60n512.cfg index 00cf0423..4fe35bb0 100644 --- a/tcl/board/twr-k60n512.cfg +++ b/tcl/board/twr-k60n512.cfg @@ -1,10 +1,12 @@ # -# Freescale KwikStik development board +# Freescale TWRK60N512 development board # source [find target/k60.cfg] -reset_config trst_and_srst +$_TARGETNAME configure -event reset-init { + puts "-event reset-init occured" +} # # Bank definition for the 'program flash' (instructions and/or data) diff --git a/tcl/interface/osbdm.cfg b/tcl/interface/osbdm.cfg new file mode 100644 index 00000000..4d0c79d3 --- /dev/null +++ b/tcl/interface/osbdm.cfg @@ -0,0 +1,12 @@ +# +# P&E Micro OSBDM (aka OSJTAG) interface +# +# http://pemicro.com/osbdm/ +# +interface osbdm +reset_config srst_only + +# +# OSBDM doesn't support speed control +# +adapter_khz 1