From: oharboe Date: Fri, 18 Jul 2008 14:43:29 +0000 (+0000) Subject: "reset" without arguments now execute a "reset run". X-Git-Tag: v0.1.0~467 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=35e84a2a254b20b6a67b716fe967d9227fc80858;p=openocd "reset" without arguments now execute a "reset run". the reset mode argument to the target command is deprecated(ignored w/error message). git-svn-id: svn://svn.berlios.de/openocd/trunk@832 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- diff --git a/doc/openocd.texi b/doc/openocd.texi index e91e8a0a..2edb8560 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -516,7 +516,7 @@ Currently, there are no options available for the ep93xx interface. @section Target configuration @itemize @bullet -@item @b{target} <@var{type}> <@var{endianess}> <@var{reset_mode}> <@var{JTAG pos}> +@item @b{target} <@var{type}> <@var{endianess}> <@var{JTAG pos}> <@var{variant}> @cindex target Defines a target that should be debugged. Currently supported types are: @@ -538,29 +538,6 @@ target board Endianess may be @option{little} or @option{big}. -The reset_mode specifies what should happen to the target when a reset occurs: -@itemize @minus -@item @b{reset_halt} -@cindex reset_halt -Immediately request a target halt after reset. This allows targets to be debugged -from the very first instruction. This is only possible with targets and JTAG -interfaces that correctly implement the reset signals. -@item @b{reset_init} -@cindex reset_init -Similar to @option{reset_halt}, but executes the script file defined to handle the -'reset' event for the target. Like @option{reset_halt} this only works with -correct reset implementations. -@item @b{reset_run} -@cindex reset_run -Simply let the target run after a reset. -@item @b{run_and_halt} -@cindex run_and_halt -Let the target run for some time (default: 1s), and then request halt. -@item @b{run_and_init} -@cindex run_and_init -A combination of @option{reset_init} and @option{run_and_halt}. The target is allowed -to run for some time, then halted, and the @option{reset} event script is executed. -@end itemize On JTAG interfaces / targets where system reset and test-logic reset can't be driven completely independent (like the LPC2000 series), or where the JTAG interface is @@ -591,7 +568,7 @@ a working_area that doesn't need to be backed up, as performing a backup slows d @subsection arm7tdmi options @cindex arm7tdmi options -target arm7tdmi <@var{endianess}> <@var{reset_mode}> <@var{jtag#}> +target arm7tdmi <@var{endianess}> <@var{jtag#}> The arm7tdmi target definition requires at least one additional argument, specifying the position of the target in the JTAG daisy-chain. The first JTAG device is number 0. The optional [@var{variant}] parameter has been removed in recent versions. @@ -829,12 +806,15 @@ OpenOCD will wait 5 seconds for the target to resume. @cindex step Single-step the target at its current code position, or at an optional address. + @item @b{reset} [@option{run}|@option{halt}|@option{init}|@option{run_and_halt} |@option{run_and_init}] @cindex reset Perform a hard-reset. The optional parameter specifies what should happen after the reset. This optional parameter overrides the setting specified in the configuration file, making the new behaviour the default for the @option{reset} command. + +With no arguments a "reset run" is executed @itemize @minus @item @b{run} @cindex reset run diff --git a/src/target/target.c b/src/target/target.c index 1c3e0ad2..0a528057 100644 --- a/src/target/target.c +++ b/src/target/target.c @@ -302,6 +302,8 @@ int target_process_reset(struct command_context_s *cmd_ctx) if ((retval = jtag_init_reset(cmd_ctx)) != ERROR_OK) return retval; + keep_alive(); /* we might be running on a very slow JTAG clk */ + /* First time this is executed after launching OpenOCD, it will read out * the type of CPU, etc. and init Embedded ICE registers in host * memory. @@ -315,6 +317,8 @@ int target_process_reset(struct command_context_s *cmd_ctx) if ((retval = target_examine(cmd_ctx)) != ERROR_OK) return retval; + keep_alive(); /* we might be running on a very slow JTAG clk */ + /* prepare reset_halt where necessary */ target = targets; while (target) @@ -949,6 +953,7 @@ int target_register_commands(struct command_context_s *cmd_ctx) register_command(cmd_ctx, NULL, "virt2phys", handle_virt2phys_command, COMMAND_ANY, "virt2phys "); register_command(cmd_ctx, NULL, "profile", handle_profile_command, COMMAND_EXEC, "PRELIMINARY! - profile "); + /* script procedures */ register_jim(cmd_ctx, "openocd_mem2array", jim_mem2array, "read memory and return as a TCL array for script processing"); register_jim(cmd_ctx, "openocd_array2mem", jim_array2mem, "convert a TCL array to memory locations and write the values"); @@ -1413,18 +1418,26 @@ int handle_target_command(struct command_context_s *cmd_ctx, char *cmd, char **a return ERROR_COMMAND_SYNTAX_ERROR; } - /* what to do on a target reset */ - (*last_target_p)->reset_mode = RESET_INIT; /* default */ if (strcmp(args[2], "reset_halt") == 0) - (*last_target_p)->reset_mode = RESET_HALT; + { + LOG_WARNING("reset_mode argument is deprecated. reset_mode = reset_run"); + } else if (strcmp(args[2], "reset_run") == 0) - (*last_target_p)->reset_mode = RESET_RUN; + { + LOG_WARNING("reset_mode argument is deprecated. reset_mode = reset_run"); + } else if (strcmp(args[2], "reset_init") == 0) - (*last_target_p)->reset_mode = RESET_INIT; + { + LOG_WARNING("reset_mode argument is deprecated. reset_mode = reset_run"); + } else if (strcmp(args[2], "run_and_halt") == 0) - (*last_target_p)->reset_mode = RESET_RUN_AND_HALT; + { + LOG_WARNING("reset_mode argument is deprecated. reset_mode = reset_run"); + } else if (strcmp(args[2], "run_and_init") == 0) - (*last_target_p)->reset_mode = RESET_RUN_AND_INIT; + { + LOG_WARNING("reset_mode argument is deprecated. reset_mode = reset_run"); + } else { /* Kludge! we want to make this reset arg optional while remaining compatible! */ @@ -1800,8 +1813,7 @@ int handle_soft_reset_halt_command(struct command_context_s *cmd_ctx, char *cmd, int handle_reset_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc) { target_t *target = get_current_target(cmd_ctx); - enum target_reset_mode reset_mode = target->reset_mode; - enum target_reset_mode save = target->reset_mode; + enum target_reset_mode reset_mode = RESET_RUN; LOG_DEBUG("-"); @@ -1842,9 +1854,6 @@ int handle_reset_command(struct command_context_s *cmd_ctx, char *cmd, char **ar /* reset *all* targets */ target_process_reset(cmd_ctx); - /* Restore default reset mode for this target */ - target->reset_mode = save; - return ERROR_OK; } @@ -2862,7 +2871,7 @@ static int jim_array2mem(Jim_Interp *interp, int argc, Jim_Obj *const *argv) u32 v; const char *varname; u8 buffer[4096]; - int i, n, e, retval; + int i, n, e, retval; /* argv[1] = name of array to get the data * argv[2] = desired width