From: Bill Kendrick Date: Mon, 14 Jan 2019 04:32:55 +0000 (-0800) Subject: POKEY: Add register #defines & internal kybd codes X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=3783010091b8f845b05e1bf0d3e789c14b7c35d8;p=cc65 POKEY: Add register #defines & internal kybd codes Add #defines for certain registers' values. Also add #defines for internal keyboard codes (unrelated to ATASCII; e.g. [Q] = 47, [W] = 46, [Shift] adds 64, etc), as seen in KBCODE. --- diff --git a/include/_pokey.h b/include/_pokey.h index fed8628b6..5cbf11f68 100644 --- a/include/_pokey.h +++ b/include/_pokey.h @@ -4,9 +4,17 @@ /* */ /* Internal include file, do not use directly */ /* */ +/* POKEY, Pot Keyboard Integrated Circuit, is a digital I/O chip designed */ +/* for the Atari 8-bit family of home computers; it combines functions for */ +/* sampling (ADC) potentiometers (such as game paddles) and scan matrices of */ +/* switches (such as a computer keyboard) as well as sound generation. */ +/* It produces four voices of distinctive square wave sound, either as clear */ +/* tones or modified with a number of distortion settings. - Wikipedia */ +/* "POKEY" article. */ /* */ /* */ /* (C) 2000 Freddy Offenga */ +/* 2019-01-13: Bill Kendrick : More defines for registers */ /* */ /* */ /* This software is provided 'as-is', without any expressed or implied */ @@ -35,7 +43,7 @@ -/* Define a structure with the pokey register offsets */ +/* Define a structure with the POKEY register offsets for write (W) */ struct __pokey_write { unsigned char audf1; /* audio channel #1 frequency */ unsigned char audc1; /* audio channel #1 control */ @@ -45,15 +53,71 @@ struct __pokey_write { unsigned char audc3; /* audio channel #3 control */ unsigned char audf4; /* audio channel #4 frequency */ unsigned char audc4; /* audio channel #4 control */ + +/* The values for the distortion bits (AUDCx) are as follows; + the first process is to divide the clock value by the frequency, + then mask the output using the polys in the order below; + finally, the result is divided by two */ +#define AUDC_POLYS_5_17 0x00 +#define AUDC_POLYS_5 0x20 /* Same as 0x60 */ +#define AUDC_POLYS_5_4 0x40 +#define AUDC_POLYS_17 0x80 +#define AUDC_POLYS_NONE 0xA0 /* Same as 0xE0 */ +#define AUDC_POLYS_4 0xC0 + +#define AUDC_VOLUME_ONLY 0x10 + + unsigned char audctl; /* audio control */ + +#define AUDCTL_CLOCKBASE_15HZ 0x01 /* Switch main clock base from 64 KHz to 15 KHz */ +#define AUDCTL_HIGHPASS_CHAN2 0x02 /* Insert high pass filter into channel two, clocked by channel four */ +#define AUDCTL_HIGHPASS_CHAN1 0x04 /* Insert high pass filter into channel one, clocked by channel two */ +#define AUDCTL_JOIN_CHAN34 0x08 /* Join channels four and three (16 bit) */ +#define AUDCTL_JOIN_CHAN12 0x10 /* Join channels two and one (16 bit) */ +#define AUDCTL_CLOCK_CHAN3_179MHZ 0x20 /* Clock channel three with 1.79 MHz */ +#define AUDCTL_CLOCK_CHAN1_179MHZ 0x40 /* Clock channel one with 1.79 MHz */ +#define AUDCTL_9BIT_POLY 0x80 /* Makes the 17 bit poly counter into nine bit poly (see also: RANDOM) */ + unsigned char stimer; /* start pokey timers */ - unsigned char skrest; /* reset serial port status reg. */ - unsigned char potgo; /* start paddle scan sequence */ + + unsigned char skrest; /* reset serial port status reg.; + Reset BITs 5 - 7 of the serial port status register (SKCTL) to "1" */ + + unsigned char potgo; /* start paddle scan sequence (see "ALLPOT") */ unsigned char unuse1; /* unused */ unsigned char serout; /* serial port data output */ + unsigned char irqen; /* interrupt request enable */ +#define POKMSK *(unsigned char *) 0x10 /* POKEY interrupts: the IRQ service uses and alters this location */ +#define IRQEN_TIMER_1 0x01 /* The POKEY timer one interrupt is enabled */ +#define IRQEN_TIMER_2 0x02 /* The POKEY timer two interrupt is enabled */ +#define IRQEN_TIMER_4 0x04 /* The POKEY timer four interrupt is enabled */ +#define IRQEN_SERIAL_TRANS_FINISHED 0x08 /* The serial out transmission finished interrupt is enabled */ +#define IRQEN_SERIAL_OUT_DATA_REQUIRED 0x10 /* The serial output data required interrupt is enabled */ +#define IRQEN_SERIAL_IN_DATA_READY 0x20 /* The serial input data ready interrupt is enabled. */ +#define IRQEN_OTHER_KEY 0x40 /* The "other key" interrupt is enabled */ +#define IRQEN_BREAK_KEY 0x80 /* The BREAK key is enabled */ + + unsigned char skctl; /* serial port control */ + +#define SKCTL_KEYBOARD_DEBOUNCE 0x01 /* Enable keyboard debounce circuits */ +#define SKCTL_KEYBOARD_SCANNING 0x02 /* Enable keyboard scanning circuit */ +#define SKCTL_FAST_POT_SCAN 0x04 /* Fast pot scan */ +/* the pot scan counter completes its sequence in two TV line times instead of + one frame time (228 scan lines). Not as accurate as the normal pot scan */ +#define SKCTL_TWO_TONE_MODE 0x08 /* Serial output is transmitted as a two-tone +signal rather than a logic true/false. POKEY two-tone mode. */ +/* Serial port mode control used to set the bi-directional clock lines */ +#define SKCTL_BIT4 0x10 /* FIXME; more meaningful name */ +#define SKCTL_BIT5 0x20 /* FIXME; more meaningful name */ +#define SKCTL_BIT6 0x40 /* FIXME; more meaningful name */ +#define SKCTL_FORCE_BREAK 0x80 /* Force break (serial output to zero) */ }; + + +/* Define a structure with the POKEY register offsets for read (R) */ struct __pokey_read { unsigned char pot0; /* paddle 0 value */ unsigned char pot1; /* paddle 1 value */ @@ -63,17 +127,104 @@ struct __pokey_read { unsigned char pot5; /* paddle 5 value */ unsigned char pot6; /* paddle 6 value */ unsigned char pot7; /* paddle 7 value */ - unsigned char allpot; /* eight paddle port status */ + unsigned char allpot; /* eight paddle port status (see "POTGO") */ unsigned char kbcode; /* keyboard code */ unsigned char random; /* random number generator */ unsigned char unuse2; /* unused */ unsigned char unuse3; /* unused */ unsigned char serin; /* serial port input */ unsigned char irqst; /* interrupt request status */ + unsigned char skstat; /* serial port status */ +#define SKSTAT_SERIN_SHIFTREG_BUSY 0x02 /* Serial input shift register busy */ +#define SKSTAT_LASTKEY_PRESSED 0x04 /* the last key is still pressed */ +#define SKSTAT_SHIFTKEY_PRESSED 0x08 /* the [Shift] key is pressed */ +#define SKSTAT_DATA_READ_INGORING_SHIFTREG 0x10 /* Data can be read directly from the serial input port, ignoring the shift register. */ +#define SKSTAT_KEYBOARD_OVERRUN 0x20 /* Keyboard over-run; Reset BITs 7, 6 and 5 (latches) to 1, using SKREST */ +#define SKSTAT_INPUT_OVERRUN 0x40 /* Serial data input over-run. Reset latches as above. */ +#define SKSTAT_INPUT_FRAMEERROR 0x80 /* Serial data input frame error caused by missing or extra bits. Reset latches as above. */ }; +/* Internal keyboard codes from http://www.atariarchives.org/c3ba/page004.php */ +/* (Defined below in the order the keys appear on a 1200XL keyboard, from top left to bottom right) */ +/* (Note: Numerous Shift+Ctrl+key combos are unavailable) */ + +#define KEYCODE_NONE 255 /* 255 = no key pressed (but is also same as Ctrl+Shift+A) */ + +/* Fn (function) keys only available on 1200XL */ +#define KEYCODE_F1 3 +#define KEYCODE_F2 4 +#define KEYCODE_F3 19 +#define KEYCODE_F4 20 + +/* HELP key only available on XL/XE series */ +#define KEYCODE_HELP 17 + +#define KEYCODE_ESC 28 +#define KEYCODE_1 31 +#define KEYCODE_2 30 +#define KEYCODE_3 26 +#define KEYCODE_4 24 +#define KEYCODE_5 29 +#define KEYCODE_6 27 +#define KEYCODE_7 51 +#define KEYCODE_8 53 +#define KEYCODE_9 48 +#define KEYCODE_0 50 +#define KEYCODE_LT 54 +#define KEYCODE_GT 55 +#define KEYCODE_BKSPC 52 + +#define KEYCODE_TAB 44 +#define KEYCODE_Q 47 +#define KEYCODE_W 46 +#define KEYCODE_E 42 +#define KEYCODE_R 40 +#define KEYCODE_T 45 +#define KEYCODE_Y 43 +#define KEYCODE_U 11 +#define KEYCODE_I 13 +#define KEYCODE_O 8 +#define KEYCODE_P 10 +#define KEYCODE_MINUS 14 +#define KEYCODE_EQUALS 15 +#define KEYCODE_RETURN 12 + +#define KEYCODE_CTRL 128 /* binary OR'd */ + +#define KEYCODE_A 63 +#define KEYCODE_S 62 +#define KEYCODE_D 58 +#define KEYCODE_F 56 +#define KEYCODE_G 61 +#define KEYCODE_H 57 +#define KEYCODE_J 1 +#define KEYCODE_K 5 +#define KEYCODE_L 0 +#define KEYCODE_; 2 +#define KEYCODE_PLUS 6 +#define KEYCODE_ASTERISK 7 +#define KEYCODE_CAPS 60 + +#define KEYCODE_SHIFT 64 /* binary OR'd */ + +#define KEYCODE_Z 23 +#define KEYCODE_X 22 +#define KEYCODE_C 18 +#define KEYCODE_V 16 +#define KEYCODE_B 21 +#define KEYCODE_N 35 +#define KEYCODE_M 37 +#define KEYCODE_COMMA 32 +#define KEYCODE_PERIOD 34 +#define KEYCODE_SLASH 38 +#define KEYCODE_FUJI 39 /* (as seen on 400/800) */ +#define KEYCODE_INVERSE 39 /* (alternative name; as seen on XL/XE) */ + +#define KEYCODE_SPACE 33 + + /* End of _pokey.h */ #endif /* #ifndef __POKEY_H */