From: Eric Bollengier <eric@baculasystems.com>
Date: Wed, 26 Sep 2012 19:39:24 +0000 (+0200)
Subject: Add labels
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=37c0c3b94d60e6b3c19c1e9d8088a76493eee012;p=bacula%2Fdocs

Add labels
---

diff --git a/docs/manuals/en/main/dirdconf.tex b/docs/manuals/en/main/dirdconf.tex
index 3f3b098c..b5ae5178 100644
--- a/docs/manuals/en/main/dirdconf.tex
+++ b/docs/manuals/en/main/dirdconf.tex
@@ -101,18 +101,21 @@ index and media database redundancy.
 supplied.  
 
 \item [Name = \lt{}name\gt{}]
+   \label{Director:Name}
    \index[dir]{Name}
    \index[dir]{Directive!Name}
    The director name used by the system  administrator. This directive is
 required.  
 
 \item [Description = \lt{}text\gt{}]
+   \label{Director:Description}
    \index[dir]{Description}
    \index[dir]{Directive!Description}
    The text field contains a  description of the Director that will be displayed
 in the  graphical user interface. This directive is optional.  
 
 \item [Password = \lt{}UA-password\gt{}]
+   \label{Director:{Password}
    \index[dir]{Password}
    \index[dir]{Directive!Password}
    Specifies the password that must be supplied for the default Bacula
@@ -130,7 +133,7 @@ in the  graphical user interface. This directive is optional.
    security reasons.
 
 \item [Messages = \lt{}Messages-resource-name\gt{}]
-   \index[dir]{Messages}
+   \label{Director:Messages}
    \index[dir]{Directive!Messages}
    The messages resource  specifies where to deliver Director messages that are
    not associated  with a specific Job. Most messages are specific to a job and
@@ -139,6 +142,7 @@ in the  graphical user interface. This directive is optional.
    directive is required.  
 
 \item [Working Directory = \lt{}Directory\gt{}]
+   \label{Director:WorkingDirectory}
    \index[dir]{Working Directory}
    \index[dir]{Directive!Working Directory}
    This directive  is mandatory and specifies a directory in which the Director 
@@ -160,6 +164,7 @@ in the  graphical user interface. This directive is optional.
    be set to those values.
 
 \item [Pid Directory = \lt{}Directory\gt{}]
+   \label{Director:PidDirectory}
    \index[dir]{Pid Directory}
    \index[dir]{Directive!Pid Directory}
    This directive  is mandatory and specifies a directory in which the Director 
@@ -177,6 +182,7 @@ in the  graphical user interface. This directive is optional.
    Directory} as  defined above.  This directive is required.  
 
 \item [Scripts Directory = \lt{}Directory\gt{}]
+   \label{Director:ScriptsDirectory}
    \index[dir]{Scripts Directory}
    \index[dir]{Directive!Scripts Directory}
    This directive is optional and, if defined, specifies a directory in
@@ -187,6 +193,7 @@ in the  graphical user interface. This directive is optional.
    expanded.
 
 \item [QueryFile = \lt{}Path\gt{}]
+   \label{Director:QueryFile}
    \index[dir]{QueryFile}
    \index[dir]{Directive!QueryFile}
    This directive is mandatory and specifies a directory and file in which
@@ -196,6 +203,7 @@ in the  graphical user interface. This directive is optional.
    \$HOME} will be properly expanded.  This directive is required.
 
 \item [Heartbeat Interval = \lt{}time-interval\gt{}]
+   \label{Director:HeartbeatInterval}
    \index[dir]{Heartbeat Interval}
    \index[dir]{Directive!Heartbeat}
    This directive is optional and if specified will cause the Director to
@@ -208,6 +216,7 @@ in the  graphical user interface. This directive is optional.
 
 \label{DirMaxConJobs}
 \item [Maximum Concurrent Jobs = \lt{}number\gt{}]
+   \label{Director:MaximumConcurrentJobs}
    \index[dir]{Maximum Concurrent Jobs}
    \index[dir]{Directive!Maximum Concurrent Jobs}
    \index[general]{Simultaneous Jobs}
@@ -225,6 +234,7 @@ in the  graphical user interface. This directive is optional.
    thus avoiding excessive interleaving of the different job blocks.
 
 \item [FD Connect Timeout = \lt{}time\gt{}]
+   \label{Director:FdConnectTimeout}
    \index[dir]{FD Connect Timeout}
    \index[dir]{Directive!FD Connect Timeout}
    where {\bf time} is the time that the Director should continue
@@ -232,6 +242,7 @@ in the  graphical user interface. This directive is optional.
    the Director will cancel the job.  The default is 30 minutes.
 
 \item [SD Connect Timeout = \lt{}time\gt{}]
+   \label{Director:SdConnectTimeout}
    \index[dir]{SD Connect Timeout}
    \index[dir]{Directive!SD Connect Timeout}
    where {\bf time} is the time that the Director should continue
@@ -239,6 +250,7 @@ in the  graphical user interface. This directive is optional.
    the Director will cancel the job.  The default is 30 minutes.
 
 \item [DirAddresses = \lt{}IP-address-specification\gt{}]
+   \label{Director:DirAddresses}
    \index[dir]{DirAddresses}
    \index[dir]{Address}
    \index[general]{Address}
@@ -283,6 +295,7 @@ not use either a DirPort or a DirAddress directive in the same
 resource.
 
 \item [DirPort = \lt{}port-number\gt{}]
+   \label{Director:DirPort}
    \index[dir]{DirPort}
    \index[dir]{Directive!DirPort}
    Specify the port (a positive  integer) on which the  Director daemon will
@@ -293,6 +306,7 @@ resource.
    directive.
 
 \item [DirAddress = \lt{}IP-Address\gt{}]
+   \label{Director:DirAddress}
    \index[dir]{DirAddress}
    \index[dir]{Directive!DirAddress}
    This directive is optional, but if it is specified, it will cause the
@@ -305,6 +319,7 @@ resource.
    should not be used if you specify a DirAddresses (N.B. plural) directive.
 
 \item [DirSourceAddress = \lt{}IP-Address\gt{}]
+   \label{Director:DirSourceAddress}
    \index[fd]{DirSourceAddress}
    \index[fd]{Directive!DirSourceAddress}
    This record is optional, and if it is specified, it will cause the Director
@@ -314,6 +329,7 @@ resource.
    its outgoing connections according to the system routing table (the default).
 
 \item[Statistics Retention = \lt{}time\gt{}]
+   \label{Director:StatisticsRetention}
    \index[dir]{StatisticsRetention}
    \index[dir]{Directive!StatisticsRetention}
    \label{PruneStatistics}
@@ -334,11 +350,13 @@ resource.
    The default is 5 years.
 
 \item[VerId = \lt{}string\gt{}]
+  \label{Director:VerId}
   \index[dir]{Directive!VerId}
   where  \lt{}string\gt{} is an identifier which can be used for support purpose.
   This string is displayed using the \texttt{version} command.
 
 \item[MaximumConsoleConnections = \lt{}number\gt{}] 
+  \label{Director:MaximumConsoleConnections}
   \index[dir]{MaximumConsoleConnections}
   \index[dir]{Directive!MaximumConsoleConnections}
   \index[dir]{Console}
@@ -347,6 +365,7 @@ resource.
    larger number.
 
  \item[MaximumReloadRequests = \lt{}number\gt{}]
+\label{Director:MaximumReloadRequests}
 \index[dir]{MaximumReloadRequests}
 \index[dir]{Directive!MaximumReloadRequests}
 \index[dir]{Console}
@@ -355,32 +374,33 @@ Where \lt{}number\gt{} is the maximum number of \texttt{reload} command that
 can be done while jobs are running. The default is set to 32 and is usually
 sufficient.
 
- \item[SharedStorage = \lt{}yes\vb{}no\gt{}] 
-   \index[dir]{SharedStorage}
-   \index[dir]{Directive!SharedStorage}
-   
-   The \texttt{Shared Storage} directive is a Bacula Enterprise feature that
-   allows you to share volumes between different Storage resources. This
-   directive should be used \textbf{only} if all \texttt{Media Type} are
-   correctly set across all Devices.
-
-   The \texttt{Shared Storage} directive should be used when using the SAN
-   Shared Storage plugin or when accessing from the Director Storage resources
-   directly to Devices of an Autochanger.
-
-   When sharing volumes between different Storage resources, you will
-   need also to use the \texttt{reset-storageid} script before using the
-   \texttt{update slots} command. This script can be scheduled once a day in
-   an Admin job.
-
-\begin{verbatim}
- $ /opt/bacula/scripts/reset-storageid MediaType StorageName
- $ bconsole
- * update slots storage=StorageName drive=0
-\end{verbatim}
-
-   Please contact Bacula Systems support to get help on this advanced
-   configuration.
+%\item[SharedStorage = \lt{}yes\vb{}no\gt{}] 
+%   \label{Director:SharedStorage}
+%   \index[dir]{SharedStorage}
+%   \index[dir]{Directive!SharedStorage}
+%   
+%   The \texttt{Shared Storage} directive is a Bacula Enterprise feature that
+%   allows you to share volumes between different Storage resources. This
+%   directive should be used \textbf{only} if all \texttt{Media Type} are
+%   correctly set across all Devices.
+%
+%   The \texttt{Shared Storage} directive should be used when using the SAN
+%   Shared Storage plugin or when accessing from the Director Storage resources
+%   directly to Devices of an Autochanger.
+%
+%   When sharing volumes between different Storage resources, you will
+%   need also to use the \texttt{reset-storageid} script before using the
+%   \texttt{update slots} command. This script can be scheduled once a day in
+%   an Admin job.
+%
+%\begin{verbatim}
+% $ /opt/bacula/scripts/reset-storageid MediaType StorageName
+% $ bconsole
+% * update slots storage=StorageName drive=0
+%\end{verbatim}
+%
+%   Please contact Bacula Systems support to get help on this advanced
+%   configuration.
 
 \end{description}
 
@@ -442,6 +462,7 @@ the FileSets may be the same).
    Start of the Job resource. At least one Job  resource is required. 
 
 \item [Name = \lt{}name\gt{}]
+   \label{Job:Name}
    \index[dir]{Name}
    \index[dir]{Directive!Name}
    The Job name. This name can be specified  on the {\bf Run} command in the
@@ -455,12 +476,14 @@ the FileSets may be the same).
    execution. This directive is required. 
 
 \item [Enabled = \lt{}yes\vb{}no\gt{}]
+  \label{Job:Enable}
   \index[dir]{Enable}
   \index[dir]{Directive!Enable}
   This directive allows you to enable or disable automatic execution
   via the scheduler of a Job.
 
 \item [Type = \lt{}job-type\gt{}]
+   \label{Job:Type}
    \index[dir]{Type}
    \index[dir]{Directive!Type}
    The {\bf Type} directive specifies  the Job type, which may be one of the
@@ -510,6 +533,7 @@ the FileSets may be the same).
 \label{Level}
 
 \item [Level = \lt{}job-level\gt{}]
+\label{Job:Level}
 \index[dir]{Level}
 \index[dir]{Directive!Level}
    The Level directive specifies the default Job level to be run.  Each
@@ -749,6 +773,7 @@ For a {\bf Verify} Job, the Level may be one of the  following:
 \end{description}
 
 \item [Accurate = \lt{}yes\vb{}no\gt{}]
+\label{Job:Accurate}
 \index[dir]{Accurate}
    In accurate mode, the File daemon knowns exactly which files were present
    after the last backup. So it is able to handle deleted or renamed files.
@@ -770,6 +795,7 @@ For a {\bf Verify} Job, the Level may be one of the  following:
    required information.
 
 \item [Verify Job = \lt{}Job-Resource-Name\gt{}]
+   \label{Job:VerifyJob}
    \index[dir]{Verify Job}
    \index[dir]{Directive!Verify Job}
    If you run a verify job without this directive, the last job run will be
@@ -781,6 +807,7 @@ For a {\bf Verify} Job, the Level may be one of the  following:
    written is re-read.
 
 \item [JobDefs = \lt{}JobDefs-Resource-Name\gt{}]
+\label{Job:JobDefs}
 \index[dir]{JobDefs}
 \index[dir]{Directive!JobDefs}
    If a JobDefs-Resource-Name is specified, all the values contained in the
@@ -794,6 +821,7 @@ For a {\bf Verify} Job, the Level may be one of the  following:
    JobDefs is provided in the default bacula-dir.conf file.
 
 \item [Bootstrap = \lt{}bootstrap-file\gt{}]
+\label{Job:Bootstrap}
 \index[dir]{Bootstrap}
 \index[dir]{Directive!Bootstrap}
    The Bootstrap directive specifies a bootstrap file that, if provided,
@@ -814,6 +842,7 @@ For a {\bf Verify} Job, the Level may be one of the  following:
 
 \label{writebootstrap}
 \item [Write Bootstrap =  \lt{}bootstrap-file-specification\gt{}]
+\label{Job:WriteBootstrap}
 \index[dir]{Write Bootstrap}
 \index[dir]{Directive!Write Bootstrap}
    The {\bf writebootstrap} directive specifies a file name where Bacula
@@ -855,6 +884,7 @@ JobDefs {
    \ilink{The Bootstrap File}{BootstrapChapter} of this manual.
 
 \item [Client = \lt{}client-resource-name\gt{}]
+\label{Job:Client}
 \index[dir]{Client}
 \index[dir]{Directive!Client}
    The Client directive  specifies the Client (File daemon) that will be used in
@@ -866,6 +896,7 @@ JobDefs {
    This directive is required. 
 
 \item [FileSet = \lt{}FileSet-resource-name\gt{}]
+\label{Job:FileSet}
 \index[dir]{FileSet}
 \index[dir]{Directive!FileSet}
    The FileSet directive specifies the FileSet that will be used in the
@@ -876,6 +907,7 @@ JobDefs {
    this chapter.  This directive is required.
 
 \item [Base = \lt{}job-resource-name, ...\gt{}]
+\label{Job:Base}
 \index[dir]{Base}
 \index[dir]{Directive!Base}
 The Base directive permits to specify the list of jobs that will be used during
@@ -883,6 +915,7 @@ Full backup as base. This directive is optional. See the \ilink{Base Job
 chapter}{basejobs} for more information.
 
 \item [Messages = \lt{}messages-resource-name\gt{}]
+\label{Job:Messages}
 \index[dir]{Messages}
 \index[dir]{Directive!Messages}
    The Messages directive defines what Messages resource should be used for
@@ -893,6 +926,7 @@ chapter}{basejobs} for more information.
    directive is required.
 
 \item [Pool = \lt{}pool-resource-name\gt{}]
+\label{Job:Pool}
 \index[dir]{Pool}
 \index[dir]{Directive!Pool}
    The Pool directive defines the pool of Volumes where your data can be
@@ -903,6 +937,7 @@ chapter}{basejobs} for more information.
    section}{PoolResource} of this chapter.  This directive is required.
 
 \item [Full Backup Pool = \lt{}pool-resource-name\gt{}]
+\label{Job:FullBackupPool}
 \index[dir]{Full Backup Pool}
 \index[dir]{Directive!Full Backup Pool}
    The {\it Full Backup Pool} specifies a Pool to be used for Full backups.
@@ -910,6 +945,7 @@ chapter}{basejobs} for more information.
    directive is optional.
    
 \item [Differential Backup Pool = \lt{}pool-resource-name\gt{}]  
+\label{Job:DifferentialBackupPool}
 \index[dir]{Differential Backup Pool}
 \index[dir]{Directive!Differential Backup Pool}
    The {\it Differential Backup Pool} specifies a Pool to be used for
@@ -917,6 +953,7 @@ chapter}{basejobs} for more information.
    Differential backup.  This directive is optional.
    
 \item [Incremental Backup Pool = \lt{}pool-resource-name\gt{}]  
+\label{Job:IncrementalBackupPool}
 \index[dir]{Incremental Backup Pool}
 \index[dir]{Directive!Incremental Backup Pool}
    The {\it Incremental Backup Pool} specifies a Pool to be used for
@@ -924,6 +961,7 @@ chapter}{basejobs} for more information.
    Incremental backup.  This directive is optional.
 
 \item [Schedule = \lt{}schedule-name\gt{}]
+\label{Job:Schedule}
 \index[dir]{Schedule}
 \index[dir]{Directive!Schedule}
    The Schedule directive defines what schedule is to be used for the Job.
@@ -941,6 +979,7 @@ chapter}{basejobs} for more information.
           
 
 \item [Storage = \lt{}storage-resource-name\gt{}]
+\label{Job:Storage}
 \index[dir]{Storage}
 \index[dir]{Directive!Storage}
    The Storage directive defines the name of the storage services where you
@@ -953,6 +992,7 @@ chapter}{basejobs} for more information.
    one or the other, if not an error will result.
 
 \item [Max Start Delay = \lt{}time\gt{}]
+\label{Job:MaxStartDelay}
 \index[dir]{Max Start Delay}
 \index[dir]{Directive!Max Start Delay}
    The time specifies the maximum delay between the scheduled time and the
@@ -964,6 +1004,7 @@ chapter}{basejobs} for more information.
    which indicates no limit.
 
 \item [Max Run Time = \lt{}time\gt{}]
+\label{Job:MaxRunTime}
 \index[dir]{Max Run Time}
 \index[dir]{Directive!Max Run Time}
    The time specifies the maximum allowed time that a job may run, counted
@@ -976,6 +1017,7 @@ chapter}{basejobs} for more information.
 
 
 \item [Incremental|Differential Max Wait Time = \lt{}time\gt{}]
+\label{Job:IncrementalWaitRunTime}
 \index[dir]{Incremental Wait Run Time}
 \index[dir]{Differential Wait Run Time}
 \index[dir]{Directive!Differential Max Wait Time}
@@ -983,6 +1025,7 @@ chapter}{basejobs} for more information.
     \texttt{Incremental|Differential Max Run Time} since bacula 2.3.18.
 
 \item [Incremental Max Run Time = \lt{}time\gt{}]
+\label{Job:IncrementalMaxRunTime}
 \index[dir]{Incremental Max Run Time}
 \index[dir]{Directive!Incremental Max Run Time}
 The time specifies the maximum allowed time that an Incremental backup job may
@@ -990,6 +1033,7 @@ run, counted from when the job starts, ({\bf not} necessarily the same as when
 the job was scheduled).
 
 \item [Differential Max Wait Time = \lt{}time\gt{}]
+\label{Job:DifferentialMaxRunTime}
 \index[dir]{Differential Max Run Time}
 \index[dir]{Directive!Differential Max Run Time}
 The time specifies the maximum allowed time that a Differential backup job may
@@ -997,6 +1041,7 @@ run, counted from when the job starts, ({\bf not} necessarily the same as when
 the job was scheduled).
 
 \item [Max Run Sched Time = \lt{}time\gt{}]
+\label{Job:MaxRunSchedTime}
 \index[dir]{Max Run Sched Time}
 \index[dir]{Directive!Max Run Sched Time}
 
@@ -1006,6 +1051,7 @@ during working hours. We can see it like \texttt{Max Start Delay + Max Run
   Time}.
 
 \item [Max Wait Time = \lt{}time\gt{}]
+\label{Job:MaxWaitTime}
 \index[dir]{Max Wait Time}
 \index[dir]{Directive!Max Wait Time}
    The time specifies the maximum allowed time that a job may block waiting
@@ -1022,6 +1068,7 @@ during working hours. We can see it like \texttt{Max Start Delay + Max Run
 \end{figure}
 
 \item [Maximum Bandwidth = \lt{}speed\gt{}]
+\label{Job:MaximumBandwidth}
 \index[dir]{Maximum Bandwidth}
 \index[dir]{Directive!Maximum Bandwidth}
 
@@ -1029,6 +1076,7 @@ The speed parameter specifies the maximum allowed bandwidth that a job may
 use. The speed parameter should be specified in k/s, kb/s, m/s or mb/s.
 
 \item [Max Full Interval = \lt{}time\gt{}]
+\label{Job:MaxFullInterval}
 \index[dir]{Max Full Interval}
 \index[dir]{Directive!Max Full Interval}
    The time specifies the maximum allowed age (counting from start time) of
@@ -1041,6 +1089,7 @@ use. The speed parameter should be specified in k/s, kb/s, m/s or mb/s.
 
 \label{PreferMountedVolumes}
 \item [Prefer Mounted Volumes = \lt{}yes\vb{}no\gt{}]
+\label{Job:Prefer Mounted Volumes}
 \index[dir]{Prefer Mounted Volumes}
 \index[dir]{Directive!Prefer Mounted Volumes}
    If the Prefer Mounted Volumes directive is set to {\bf yes} (default
@@ -1077,6 +1126,7 @@ use. The speed parameter should be specified in k/s, kb/s, m/s or mb/s.
    on different drives.
 
 \item [Prune Jobs = \lt{}yes\vb{}no\gt{}]
+\label{Job:PruneJobs}
 \index[dir]{Prune Jobs}
 \index[dir]{Directive!Prune Jobs}
    Normally, pruning of Jobs from the Catalog is specified on a Client by
@@ -1087,6 +1137,7 @@ use. The speed parameter should be specified in k/s, kb/s, m/s or mb/s.
 
 
 \item [Prune Files = \lt{}yes\vb{}no\gt{}]
+\label{Job:PruneFiles}
 \index[dir]{Prune Files}
 \index[dir]{Directive!Prune Files}
    Normally, pruning of Files from the Catalog is specified on a Client by
@@ -1096,6 +1147,7 @@ use. The speed parameter should be specified in k/s, kb/s, m/s or mb/s.
    default is {\bf no}.
 
 \item [Prune Volumes = \lt{}yes\vb{}no\gt{}]
+\label{Job:PruneVolumes}
 \index[dir]{Prune Volumes}
 \index[dir]{Directive!Prune Volumes}
    Normally, pruning of Volumes from the Catalog is specified on a Pool by
@@ -1106,6 +1158,7 @@ use. The speed parameter should be specified in k/s, kb/s, m/s or mb/s.
    Pool resource.  The default is {\bf no}.
 
 \item [RunScript \{\lt{}body-of-runscript\gt{}\}]
+   \label{Job:RunScript}
    \index[dir]{RunScript}
    \index[dir]{Directive!Run Script}
 
@@ -1204,6 +1257,7 @@ Console          &       &          & Console command\\
 Some character substitutions are not available in all situations. The Job Exit
 Status code \%e edits the following values:
 
+
 \index[dir]{Exit Status}
 \begin{itemize}
 \item OK
@@ -1438,6 +1492,7 @@ It is important to redirect the input and outputs of a backgrounded command to
 /dev/null to prevent the script from blocking.
 
 \item [Run Before Job = \lt{}command\gt{}]
+\label{Job:RunBeforeJob}
 \index[dir]{Run Before Job}
 \index[dir]{Directive!Run Before Job}
 \index[dir]{Directive!Run Before Job}
@@ -1468,6 +1523,7 @@ RunScript {
    before leaving will be used.
 
 \item [Run After Job = \lt{}command\gt{}]
+\label{Job:RunAfterJob}
 \index[dir]{Run After Job}
 \index[dir]{Directive!Run After Job}
    The specified {\bf command} is run as an external program if the current
@@ -1485,6 +1541,7 @@ RunScript {
    non-normal status.
 
 \item [Run After Failed Job = \lt{}command\gt{}]
+\label{Job:RunAfterJob}
 \index[dir]{Run After Job}
 \index[dir]{Directive!Run After Job}
    The specified {\bf command} is run as an external program after the current
@@ -1510,6 +1567,7 @@ RunScript {
   
 
 \item [Client Run Before Job = \lt{}command\gt{}]
+\label{Job:ClientRunBeforeJob}
 \index[dir]{Client Run Before Job}
 \index[dir]{Directive!Client Run Before Job}
    This directive is the same as {\bf Run Before Job} except that the
@@ -1517,6 +1575,7 @@ RunScript {
    Unix systems as noted above for the {\bf RunScript}.
 
 \item [Client Run After Job = \lt{}command\gt{}]
+   \label{Job:ClientRunAfterJob}
    \index[dir]{Client Run After Job}
    \index[dir]{Directive!Client Run After Job}
    The specified {\bf command} is run on the client machine as soon
@@ -1527,6 +1586,7 @@ RunScript {
    concerning Windows clients.
 
 \item [Rerun Failed Levels = \lt{}yes\vb{}no\gt{}]
+   \label{Job:RerunFailedLevels}
    \index[dir]{Rerun Failed Levels}
    \index[dir]{Directive!Rerun Failed Levels}
    If this directive is set to {\bf yes} (default no), and Bacula detects that
@@ -1545,6 +1605,7 @@ RunScript {
    trigger a rerun.
 
 \item [Spool Data = \lt{}yes\vb{}no\gt{}]
+   \label{Job:SpoolData}
    \index[dir]{Spool Data}
    \index[dir]{Directive!Spool Data}
 
@@ -1568,12 +1629,14 @@ RunScript {
    automatically set to yes.
 
 \item [SpoolData=yes\vb{}no]
+   \label{Job:SpoolData}
    \index[dir]{SpoolData}
    \index[dir]{Directive!SpoolData}
    tells Bacula to request the Storage  daemon to spool data to a disk file
    before writing it to the Volume (normally a tape). 
 
 \item [Spool Attributes = \lt{}yes\vb{}no\gt{}]
+   \label{Job:SpoolAttributes}
    \index[dir]{Spool Attributes}
    \index[dir]{Directive!Spool Attributes}
    \index[dir]{slow}
@@ -1593,6 +1656,7 @@ RunScript {
    automatically set to yes.
 
 \item [SpoolSize={\it bytes}]
+   \label{Job:SpoolSize}
    \index[dir]{SpoolSize}
    \index[dir]{Directive!SpoolSize}
    where the bytes specify the maximum spool size for this job.
@@ -1602,6 +1666,7 @@ RunScript {
 
 
 \item [Where = \lt{}directory\gt{}]
+   \label{Job:Where}
    \index[dir]{Where}
    \index[dir]{Directive!Where}
    This directive applies only to a Restore job and specifies a prefix to
@@ -1615,6 +1680,7 @@ RunScript {
 
 \item [Add Prefix = \lt{}directory\gt{}]
   \label{confaddprefix}
+  \label{Job:AddPrefix}
   \index[dir]{AddPrefix}
   \index[dir]{Directive!AddPrefix}
   This directive applies only to a Restore job and specifies a prefix to the
@@ -1622,6 +1688,7 @@ RunScript {
   Relocation}{filerelocation} feature implemented in Bacula 2.1.8 or later.  
 
 \item [Add Suffix = \lt{}extention\gt{}]
+  \label{Job:AddSuffix}
   \index[dir]{AddSuffix}
   \index[dir]{Directive!AddSuffix}
   This directive applies only to a Restore job and specifies a suffix to all
@@ -1632,6 +1699,7 @@ RunScript {
   \texttt{/etc/passwsd.old}
 
 \item [Strip Prefix = \lt{}directory\gt{}]
+  \label{Job:StripPrefix}
   \index[dir]{StripPrefix}
   \index[dir]{Directive!StripPrefix}
   This directive applies only to a Restore job and specifies a prefix to remove
@@ -1651,6 +1719,7 @@ RunScript {
 \end{verbatim}
 
 \item [RegexWhere = \lt{}expressions\gt{}]
+  \label{Job:RegexWhere}
   \index[dir]{RegexWhere}
   \index[dir]{Directive!RegexWhere}
   This directive applies only to a Restore job and specifies a regex filename
@@ -1661,6 +1730,7 @@ RunScript {
   \ilink{this}{useregexwhere}.
 
 \item [Replace = \lt{}replace-option\gt{}]
+   \label{Job:Replace}
    \index[dir]{Replace}
    \index[dir]{Directive!Replace}
    This directive applies only to a Restore job and specifies what happens
@@ -1690,6 +1760,7 @@ RunScript {
 \end{description}
 
 \item [Prefix Links=\lt{}yes\vb{}no\gt{}]
+   \label{Job:PrefixLinks}
    \index[dir]{Prefix Links}
    \index[dir]{Directive!Prefix Links}
    If a {\bf Where} path prefix is specified for a recovery job, apply it
@@ -1701,6 +1772,7 @@ RunScript {
    original locations, all files linked with absolute names will be broken.
 
 \item [Maximum Concurrent Jobs = \lt{}number\gt{}]
+   \label{Job:MaximumConcurrentJobs}
    \index[dir]{Maximum Concurrent Jobs}
    \index[dir]{Directive!Maximum Concurrent Jobs}
    where \lt{}number\gt{} is the maximum number of Jobs from the current
@@ -1714,6 +1786,7 @@ RunScript {
    Director's resource.
 
 \item [Reschedule On Error = \lt{}yes\vb{}no\gt{}]
+   \label{Job:RescheduleOnError}
    \index[dir]{Reschedule On Error}
    \index[dir]{Directive!Reschedule On Error}
    If this directive is enabled, and the job terminates in error, the job
@@ -1726,6 +1799,7 @@ RunScript {
    machines that are not always connected to the network or switched on.
 
 \item [Reschedule Interval = \lt{}time-specification\gt{}]
+   \label{Job:RescheduleInterval}
    \index[dir]{Reschedule Interval}
    \index[dir]{Directive!Reschedule Interval}
    If you have specified {\bf Reschedule On Error = yes} and the job
@@ -1736,6 +1810,7 @@ RunScript {
    rescheduled on error.
 
 \item [Reschedule Times = \lt{}count\gt{}]
+   \label{Job:RescheduleTimes}
    \index[dir]{Reschedule Times}
    \index[dir]{Directive!Reschedule Times}
    This directive specifies the maximum number of times to reschedule the
@@ -1743,6 +1818,7 @@ RunScript {
    indefinite number of times.
 
 \item [Allow Duplicate Jobs = \lt{}yes\vb{}no\gt{}]
+\label{Job:AllowDuplicateJobs}
 \index[general]{Allow Duplicate Jobs}
 
 \begin{figure}[htbp]
@@ -1767,6 +1843,7 @@ runs longer than expected because no tapes are available.
   will be cancelled.
 
 \item [Allow Higher Duplicates = \lt{}yes\vb{}no\gt{}]
+\label{Job:AllowHigherDuplicates}
 \index[general]{Allow Higher Duplicates}
   This directive was implemented in version 5.0.0, but does not work
   as expected. If used, it should always be set to no.  In later versions
@@ -1774,6 +1851,7 @@ runs longer than expected because no tapes are available.
 
 
 \item [Cancel Lower Level Duplicates = \lt{}yes\vb{}no\gt{}]
+\label{Job:CancelLowerLevelDuplicates}
 \index[general]{Cancel Lower Level Duplicates}
   If \textbf{Allow Duplicates Jobs} is set to \textbf{no} and this
   directive is set to \textbf{yes}, Bacula will choose between duplicated
@@ -1784,6 +1862,7 @@ runs longer than expected because no tapes are available.
   Cancel XXX Duplicate directives will be examined.
 
 \item [Cancel Queued Duplicates = \lt{}yes\vb{}no\gt{}]
+\label{Job:CancelQueuedDuplicates}
 \index[general]{Cancel Queued Duplicates}
   If {\bf Allow Duplicate Jobs} is set to {\bf no} and
   if this directive is set to {\bf yes} any job that is
@@ -1791,6 +1870,7 @@ runs longer than expected because no tapes are available.
   The default is {\bf no}. 
 
 \item[Cancel Running Duplicates = \lt{}yes\vb{}no\gt{}]
+\label{Job:CancelRunningDuplicates}
 \index[general]{Cancel Running Duplicates}
   If {\bf Allow Duplicate Jobs} is set to {\bf no} and
   if this directive is set to {\bf yes} any job that is already running
@@ -1804,6 +1884,7 @@ runs longer than expected because no tapes are available.
 %%  idea to cancel it.
 
 \item [Run = \lt{}job-name\gt{}]
+   \label{Job:Run}
    \index[dir]{Run}
    \index[dir]{Directive!Run}
    \index[dir]{Clone a Job}
@@ -1848,6 +1929,7 @@ runs longer than expected because no tapes are available.
 
 \label{Priority}
 \item [Priority = \lt{}number\gt{}]
+   \label{Job:Priority}
    \index[dir]{Priority}
    \index[dir]{Directive!Priority}
    This directive permits you to control the order in which your jobs will
@@ -1900,6 +1982,7 @@ correct order, and that your priority scheme will be respected.
 
 \label{AllowMixedPriority}
 \item [Allow Mixed Priority = \lt{}yes\vb{}no\gt{}]
+\label{Job:AllowMixedPriority}
 \index[dir]{Allow Mixed Priority}
    This directive is only implemented in version 2.5 and later.  When
    set to {\bf yes} (default {\bf no}), this job may run even if lower
@@ -1917,6 +2000,7 @@ correct order, and that your priority scheme will be respected.
 
 \label{WritePartAfterJob}
 \item [Write Part After Job = \lt{}yes\vb{}no\gt{}]
+\label{Job:WritePartAfterJob}
 \index[dir]{Write Part After Job}
 \index[dir]{Directive!Write Part After Job}
    This directive is only implemented in version 1.37 and later.
@@ -1987,11 +2071,13 @@ be run manually. In general, you specify an action to be taken and when.
    automatically started.
 
 \item [Name = \lt{}name\gt{}]
+   \label{Schdedule:Name}
    \index[dir]{Name}
    \index[dir]{Directive!Name}
    The name of the schedule being defined.  The Name directive is required. 
 
 \item [Run = \lt{}Job-overrides\gt{} \lt{}Date-time-specification\gt{}]
+   \label{Schdedule:Run}
    \index[dir]{Run}
    \index[dir]{Directive!Run}
    The Run directive defines when a Job is to be run, and what overrides if
@@ -2271,12 +2357,14 @@ one Client resource definition for each machine to be backed up.
    Start of the Client directives.  
 
 \item [Name = \lt{}name\gt{}]
+   \label{Client:Name}
    \index[dir]{Name}
    \index[dir]{Directive!Name}
    The client name which will be used in the  Job resource directive or in the
 console run command.  This directive is required.  
 
 \item [Address = \lt{}address\gt{}]
+   \label{Client:Address}
    \index[dir]{Address}
    \index[dir]{Directive!FD Address}
    \index[dir]{File Daemon Address}
@@ -2286,18 +2374,21 @@ console run command.  This directive is required.
    This directive is required.
 
 \item [FD Port = \lt{}port-number\gt{}]
+   \label{Client:FdPort}
    \index[dir]{FD Port}
    \index[dir]{Directive!FD Port}
    Where the port is a port  number at which the Bacula File server daemon can
    be contacted.  The default is 9102. 
 
 \item [Catalog = \lt{}Catalog-resource-name\gt{}]
+   \label{Client:Catalog}
    \index[dir]{Catalog}
    \index[dir]{Directive!Catalog}
    This specifies the  name of the catalog resource to be used for this Client. 
    This directive is required.  
 
 \item [Password = \lt{}password\gt{}]
+   \label{Client:Password}
    \index[dir]{Password}
    \index[dir]{Directive!Password}
    This is the password to be  used when establishing a connection with the File
@@ -2314,6 +2405,7 @@ console run command.  This directive is required.
 \label{FileRetention}
 \item [File Retention = \lt{}time-period-specification\gt{}]
    \label{FileRetention}
+   \label{Client:FileRetention}
    \index[dir]{File Retention}
    \index[dir]{Directive!File Retention}
    The File Retention directive defines the length of time that  Bacula will
@@ -2335,9 +2427,9 @@ console run command.  This directive is required.
 
    The  default is 60 days. 
 
-\label{JobRetention}
 \item [Job Retention = \lt{}time-period-specification\gt{}]
    \label{JobRetention}
+   \label{Client:JobRetention}
    \index[dir]{Job Retention}
    \index[dir]{Directive!Job Retention}
    The Job Retention directive defines the length of time that  Bacula will keep
@@ -2365,6 +2457,7 @@ console run command.  This directive is required.
 
 \label{AutoPrune}
 \item [AutoPrune = \lt{}yes\vb{}no\gt{}]
+   \label{Client:AutoPrune}
    \index[dir]{AutoPrune}
    \index[dir]{Directive!AutoPrune}
    If AutoPrune is set to  {\bf yes} (default), Bacula (version 1.20 or greater)
@@ -2375,6 +2468,7 @@ console run command.  This directive is required.
    stored in the backup archives (on Volumes).  
 
 \item [Maximum Concurrent Jobs = \lt{}number\gt{}]
+   \label{Client:MaximumConcurrentJobs}
    \index[dir]{Maximum Concurrent Jobs}
    \index[dir]{Directive!Maximum Concurrent Jobs}
    where \lt{}number\gt{}  is the maximum number of Jobs with the current Client
@@ -2385,6 +2479,7 @@ console run command.  This directive is required.
    The  default is set to 1, but you may set it to a larger number.
 
 \item [Maximum Bandwidth Per Job = \lt{}speed\gt{}]
+\label{Client:MaximumBandwidthPerJob}
 \index[dir]{Maximum Bandwidth Per Job}
 \index[dir]{Directive!Maximum Bandwidth Per Job}
 
@@ -2412,6 +2507,7 @@ k/s, Kb/s, m/s or Mb/s.
 % \end{figure}
 
 \item [Priority = \lt{}number\gt{}]
+   \label{Client:Priority}
    \index[dir]{Priority}
    \index[dir]{Directive!Priority}
    The number specifies the  priority of this client relative to other clients
@@ -2450,12 +2546,14 @@ the Director.
    specified. 
 
 \item [Name = \lt{}name\gt{}]
+   \label{Storage:Name}
    \index[dir]{Name}
    \index[dir]{Directive!Name}
    The name of the storage resource. This  name appears on the Storage directive
    specified in the Job resource and is required. 
 
 \item [Address = \lt{}address\gt{}]
+   \label{Storage:Address}
    \index[dir]{Address}
    \index[dir]{Directive!SD Address}
    \index[dir]{Storage daemon Address}
@@ -2466,7 +2564,9 @@ the Director.
    the  name but rather a fully qualified machine name or an IP address.  This
    directive is required. 
 
- \item [FD Storage Address = \lt{}address\gt{}] \index[dir]{FDStorageAddress}
+ \item [FD Storage Address = \lt{}address\gt{}] 
+   \label{Storage:FDStorageAddress}
+   \index[dir]{FDStorageAddress}
    \index[dir]{Directive!FD Storage Address} \index[dir]{Storage daemon
      Address} Where the address is a host name, a {\bf fully qualified domain
      name}, or an {\bf IP address}. Please note that the \lt{}address\gt{} as
@@ -2482,6 +2582,7 @@ the Director.
 \end{figure}
 
 \item [SD Port = \lt{}port\gt{}]
+   \label{Storage:SdPort}
    \index[dir]{SD Port}
    \index[dir]{Directive!SD Port}
    Where port is the port to use to  contact the storage daemon for information
@@ -2489,6 +2590,7 @@ the Director.
    of the  Storage daemon's configuration file. The default is 9103. 
 
 \item [Password = \lt{}password\gt{}]
+   \label{Storage:Password}
    \index[dir]{Password}
    \index[dir]{Directive!Password}
    This is the password to be used  when establishing a connection with the
@@ -2502,6 +2604,7 @@ the Director.
    process, but it is preferable for security reasons to use random text.
 
 \item [Device = \lt{}device-name\gt{}]
+   \label{Storage:Device}
    \index[dir]{Device}
    \index[dir]{Directive!Device}
    This directive specifies the Storage daemon's name of the device
@@ -2522,6 +2625,7 @@ the Director.
 
 \label{MediaType}
 \item [Media Type = \lt{}MediaType\gt{}]
+   \label{Storage:MediaType}
    \index[dir]{Media Type}
    \index[dir]{Directive!Media Type}
    This directive specifies the Media Type to be used to store the data.
@@ -2582,6 +2686,7 @@ the Director.
 
 \label{Autochanger1}
 \item [Autochanger = \lt{}yes\vb{}no\gt{}]  
+   \label{Storage:Autochanger}
    \index[dir]{Autochanger}
    \index[dir]{Directive!Autochanger}
    If you specify {\bf yes} for this command (the default is {\bf no}),
@@ -2608,6 +2713,7 @@ the Director.
    details of using autochangers.
 
 \item [Maximum Concurrent Jobs = \lt{}number\gt{}]
+   \label{Storage:MaximumConcurrentJobs}
    \index[dir]{Maximum Concurrent Jobs}
    \index[dir]{Directive!Maximum Concurrent Jobs}
    where \lt{}number\gt{}  is the maximum number of Jobs with the current
@@ -2624,6 +2730,7 @@ the Director.
 
 \item [AllowCompression = \lt{}yes\vb{}no\gt{}]
   \label{AllowCompression}
+   \label{Storage:AllowCompression}
    \index[dir]{AllowCompression}
    \index[dir]{Directive!AllowCompression}
 
@@ -2634,6 +2741,7 @@ the Director.
    resource.
 
 \item [Heartbeat Interval = \lt{}time-interval\gt{}]
+   \label{Storage:Heartbeat Interval}
    \index[dir]{Heartbeat Interval}
    \index[dir]{Directive!Heartbeat}
    This directive is optional and if specified will cause the Director to
@@ -2746,6 +2854,7 @@ The Pool Resource defined in the Director's configuration file
 
 
 \item [Name = \lt{}name\gt{}]
+   \label{Pool:Name}
    \index[dir]{Name}
    \index[dir]{Directive!Name}
    The name of the pool.  For most applications, you will use the default
@@ -2753,6 +2862,7 @@ The Pool Resource defined in the Director's configuration file
 
 \label{MaxVolumes}
 \item [Maximum Volumes = \lt{}number\gt{}]
+   \label{Pool:MaximumVolumes}
    \index[dir]{Maximum Volumes}
    \index[dir]{Directive!Maximum Volumes}
    This directive specifies the maximum number of volumes (tapes or files)
@@ -2763,6 +2873,7 @@ The Pool Resource defined in the Director's configuration file
    made to disk files do not become too numerous or consume too much space.
 
 \item [Pool Type = \lt{}type\gt{}]
+   \label{Pool:PoolType}
    \index[dir]{Pool Type}
    \index[dir]{Directive!Pool Type}
    This directive defines the pool type, which corresponds to the type of
@@ -2779,6 +2890,7 @@ The Pool Resource defined in the Director's configuration file
    Note, only Backup is current implemented.
 
 \item [Storage = \lt{}storage-resource-name\gt{}]
+\label{Pool:Storage}
 \index[dir]{Storage}
 \index[dir]{Directive!Storage}
    The Storage directive defines the name of the storage services where you
@@ -2791,6 +2903,7 @@ The Pool Resource defined in the Director's configuration file
    one or the other.  If not configuration error will result.
 
 \item [Use Volume Once = \lt{}yes\vb{}no\gt{}]
+   \label{Pool:UseVolumeOnce}
    \index[dir]{Use Volume Once}
    \index[dir]{Directive!Use Volume Once}
    This directive if set to {\bf yes} specifies that each volume is to be
@@ -2810,6 +2923,7 @@ The Pool Resource defined in the Director's configuration file
    using this directive with multiple simultaneous jobs.
 
 \item [Maximum Volume Jobs = \lt{}positive-integer\gt{}]
+   \label{Pool:MaximumVolumeJobs}
    \index[dir]{Maximum Volume Jobs}
    \index[dir]{Directive!Maximum Volume Jobs}
    This directive specifies the maximum number of Jobs that can be written
@@ -2835,6 +2949,7 @@ The Pool Resource defined in the Director's configuration file
    longer be written.
 
 \item [Maximum Volume Files = \lt{}positive-integer\gt{}]
+   \label{Pool:MaximumVolumeFiles}
    \index[dir]{Maximum Volume Files}
    \index[dir]{Directive!Maximum Volume Files}
    This directive specifies the maximum number of files that can be written
@@ -2854,6 +2969,7 @@ The Pool Resource defined in the Director's configuration file
    Volume you must use the {\bf update} command in the Console.
 
 \item [Maximum Volume Bytes = \lt{}size\gt{}]
+   \label{Pool:MaximumVolumeBytes}
    \index[dir]{Maximum Volume Bytes}
    \index[dir]{Directive!Maximum Volume Bytes}
    This directive specifies the maximum number of bytes that can be written
@@ -2877,6 +2993,7 @@ The Pool Resource defined in the Director's configuration file
    Volume you must use the {\bf update} command in the Console.
 
 \item [Volume Use Duration = \lt{}time-period-specification\gt{}]
+   \label{Pool:VolumeUseDuration}
    \index[dir]{Volume Use Duration}
    \index[dir]{Directive!Volume Use Duration}
    The Volume Use Duration directive defines the time period that the
@@ -2921,6 +3038,7 @@ The Pool Resource defined in the Director's configuration file
    \ilink{\bf update volume}{UpdateCommand} command in the Console.  
 
 \item [Catalog Files = \lt{}yes\vb{}no\gt{}]
+   \label{Pool:CatalogFiles}
    \index[dir]{Catalog Files}
    \index[dir]{Directive!Catalog Files}
    This directive defines whether or not you want the names of the files
@@ -2934,6 +3052,7 @@ The Pool Resource defined in the Director's configuration file
    
 \label{PoolAutoPrune}
 \item [AutoPrune = \lt{}yes\vb{}no\gt{}]
+   \label{Pool:AutoPrune}
    \index[dir]{AutoPrune}
    \index[dir]{Directive!AutoPrune}
    If AutoPrune is set to {\bf yes} (default), Bacula (version 1.20 or
@@ -2945,6 +3064,7 @@ The Pool Resource defined in the Director's configuration file
    
 \label{VolRetention}
 \item [Volume Retention = \lt{}time-period-specification\gt{}]
+   \label{Pool:VolumeRetention}
    \index[dir]{Volume Retention}
    \index[dir]{Directive!Volume Retention}
    The Volume Retention directive defines the length of time that {\bf
@@ -2991,6 +3111,7 @@ The Pool Resource defined in the Director's configuration file
    Volume you must use the {\bf update} command in the Console.
 
 \item [Action On Purge = \lt{Truncate}]
+\label{Pool:ActionOnPurge}
 \index[dir]{actiononpurge}
 
 This directive \textbf{ActionOnPurge=Truncate} instructs Bacula to truncate the
@@ -3023,6 +3144,7 @@ Job {
 
 \label{PoolScratchPool}
 \item [ScratchPool = \lt{}pool-resource-name\gt{}]
+   \label{Pool:ScrachPool}
    \index[dir]{ScrachPool}
    \index[dir]{Directive!ScrachPool}
    This directive permits to specify a dedicate \textsl{Scratch} for the
@@ -3034,6 +3156,7 @@ Job {
 
 \label{PoolRecyclePool}
 \item [RecyclePool = \lt{}pool-resource-name\gt{}]
+   \label{Pool:RecyclePool}
    \index[dir]{RecyclePool}
    \index[dir]{Directive!RecyclePool}
    This directive defines to which pool
@@ -3054,6 +3177,7 @@ Job {
    
 \label{PoolRecycle}
 \item [Recycle = \lt{}yes\vb{}no\gt{}]
+   \label{Pool:Recycle}
    \index[dir]{Recycle}
    \index[dir]{Directive!Recycle}
    This directive specifies whether or not Purged Volumes may be recycled.
@@ -3083,6 +3207,7 @@ Job {
 
 \label{RecycleOldest}
 \item [Recycle Oldest Volume = \lt{}yes\vb{}no\gt{}]
+   \label{Pool:RecycleOldestVolume}
    \index[dir]{Recycle Oldest Volume}
    \index[dir]{Directive!Recycle Oldest Volume}
    This directive instructs the Director to search for the oldest used
@@ -3107,6 +3232,7 @@ Job {
 \label{RecycleCurrent}
 
 \item [Recycle Current Volume = \lt{}yes\vb{}no\gt{}]
+   \label{Pool:RecycleCurrentVolume}
    \index[dir]{Recycle Current Volume}
    \index[dir]{Directive!Recycle Current Volume}
    If Bacula needs a new Volume, this directive instructs Bacula to Prune
@@ -3130,6 +3256,7 @@ Job {
 \label{PurgeOldest}
 
 \item [Purge Oldest Volume = \lt{}yes\vb{}no\gt{}]
+   \label{Pool:PurgeOldestVolume}
    \index[dir]{Purge Oldest Volume}
    \index[dir]{Directive!Purge Oldest Volume}
    This directive instructs the Director to search for the oldest used
@@ -3159,6 +3286,7 @@ Job {
    data.  The default is {\bf no}.
 
 \item [File Retention = \lt{}time-period-specification\gt{}]
+   \label{Pool:FileRetention}
    \index[dir]{File Retention}
    \index[dir]{Directive!File Retention}
    The File Retention directive defines the length of time that  Bacula will
@@ -3176,6 +3304,7 @@ Job {
    \ilink{FileRetention}{FileRetention}
 
 \item [Job Retention = \lt{}time-period-specification\gt{}]
+   \label{Pool:JobRetention}
    \index[dir]{Job Retention}
    \index[dir]{Directive!Job Retention}
 
@@ -3192,6 +3321,7 @@ Job {
    \ilink{JobRetention}{JobRetention}
 
 \item [Cleaning Prefix = \lt{}string\gt{}]
+   \label{Pool:CleaningPrefix}
    \index[dir]{Cleaning Prefix}
    \index[dir]{Directive!Cleaning Prefix}
    This directive defines a prefix string, which if it matches the
@@ -3203,6 +3333,7 @@ Job {
 
 \label{Label}
 \item [Label Format = \lt{}format\gt{}]
+   \label{Pool:LabelFormat}
    \index[dir]{Label Format}
    \index[dir]{Directive!Label Format}
    This directive specifies the format of the labels contained in this
@@ -3308,6 +3439,7 @@ defined.
 
 
 \item [Name = \lt{}name\gt{}]
+   \label{Catalog:Name}
    \index[dir]{Name}
    \index[dir]{Directive!Name}
    The name of the Catalog.  No necessary relation to the database server
@@ -3316,12 +3448,14 @@ defined.
    Catalog.  This directive is required.
 
 \item [password = \lt{}password\gt{}]
+   \label{Catalog:Password}
    \index[dir]{password}
    \index[dir]{Directive!password}
    This specifies the password to use when logging into the database.  This
    directive is required.
 
 \item [DB Name = \lt{}name\gt{}]
+   \label{Catalog:DbName}
    \index[dir]{DB Name}
    \index[dir]{Directive!DB Name}
    This specifies the name of the database.  If you use multiple catalogs
@@ -3331,12 +3465,14 @@ defined.
    tables using this name.  This directive is required.
 
 \item [user = \lt{}user\gt{}]
+   \label{Catalog:User}
    \index[dir]{user}
    \index[dir]{Directive!user}
    This specifies what user name to use to log into the database.  This
    directive is required.
 
 \item [DB Socket = \lt{}socket-name\gt{}]
+   \label{Catalog:DbSocket}
    \index[dir]{DB Socket}
    \index[dir]{Directive!DB Socket}
    This is the name of  a socket to use on the local host to connect to the
@@ -3346,6 +3482,7 @@ defined.
    MySQL server must reside on the same machine as the Director.
 
 \item [DB Address = \lt{}address\gt{}]
+   \label{Catalog:DBAddress}
    \index[dir]{DB Address}
    \index[dir]{Directive!DB Address}
    This is the host address  of the database server. Normally, you would specify
@@ -3355,6 +3492,7 @@ defined.
    This directive is optional.  
 
 \item [DB Port = \lt{}port\gt{}]
+   \label{Catalog:DbPort}
    \index[dir]{DB Port}
    \index[dir]{Directive!DB Port}
    This defines the port to  be used in conjunction with {\bf DB Address} to
@@ -3363,7 +3501,7 @@ defined.
    directive is optional.
 
 %% \item [Multiple Connections = \lt{}yes\vb{}no\gt{}]
-%% \index[dir]{Multiple Connections}
+
 %% \index[dir]{Directive!Multiple Connections}
 %% By default, this  directive is set to no. In that case, each job that uses
 the
@@ -3477,6 +3615,7 @@ directives are permitted within the Director's configuration resource:
 \begin{description}
 
 \item [Name = \lt{}name\gt{}]
+   \label{Console:Name}
    \index[dir]{Name}
    \index[dir]{Directive!Name}
    The name of the console. This  name must match the name specified in the
@@ -3484,6 +3623,7 @@ Console's configuration  resource (much as is the case with Client
 definitions).  
 
 \item [Password = \lt{}password\gt{}]
+   \label{Console:Password}
    \index[dir]{Password}
    \index[dir]{Directive!Password}
    Specifies the password that must be supplied for a named Bacula Console
@@ -3500,6 +3640,7 @@ definitions).
    random text.      
 
 \item [JobACL = \lt{}name-list\gt{}]
+   \label{Console:JobAcl}
    \index[dir]{JobACL}
    \index[dir]{Directive!JobACL}
    This directive is used to specify a list of Job resource names that can
@@ -3521,6 +3662,7 @@ With the above specification, the console can access the Director's  resources
 for the four jobs named on the JobACL directives,  but for no others.  
 
 \item [ClientACL = \lt{}name-list\gt{}]
+   \label{Console:ClientAcl}
    \index[dir]{ClientACL}
    \index[dir]{Directive!ClientACL}
    This directive is used to  specify a list of Client resource names that can
@@ -3528,42 +3670,49 @@ be
 accessed by  the console.  
 
 \item [StorageACL = \lt{}name-list\gt{}]
+   \label{Console:StorageAcl}
    \index[dir]{StorageACL}
    \index[dir]{Directive!StorageACL}
    This directive is used to  specify a list of Storage resource names that can
 be accessed by  the console.  
 
 \item [ScheduleACL = \lt{}name-list\gt{}]
+   \label{Console:ScheduleAcl}
    \index[dir]{ScheduleACL}
    \index[dir]{Directive!ScheduleACL}
    This directive is used to  specify a list of Schedule resource names that can
    be accessed by the console.
 
 \item [PoolACL = \lt{}name-list\gt{}]
+   \label{Console:PoolAcl}
    \index[dir]{PoolACL}
    \index[dir]{Directive!PoolACL}
    This directive is used to  specify a list of Pool resource names that can be
    accessed by the console.
 
 \item [FileSetACL = \lt{}name-list\gt{}]
+   \label{Console:FileSetAcl}
    \index[dir]{FileSetACL}
    \index[dir]{Directive!FileSetACL}
    This directive is used to specify a list of FileSet resource names that
    can be accessed by the console.
 
 \item [CatalogACL = \lt{}name-list\gt{}]
+   \label{Console:CatalogAcl}
    \index[dir]{CatalogACL}
    \index[dir]{Directive!CatalogACL}
    This directive is used to specify a list of Catalog resource names that
    can be accessed by the console.
 
 \item [CommandACL = \lt{}name-list\gt{}]
+   \label{Console:CommandAcl}
    \index[dir]{CommandACL}
    \index[dir]{Directive!CommandACL}
    This directive is used to specify a list of of console commands that can
    be executed by the console.
 
 \item [WhereACL = \lt{}string\gt{}]
+   \label{Console:WhereAcl}
    \index[dir]{WhereACL}
    \index[dir]{Directive!WhereACL}
    This directive permits you to specify where a restricted console
@@ -3605,18 +3754,21 @@ details.
    Start of the Counter resource.  Counter directives are optional. 
 
 \item [Name = \lt{}name\gt{}]
+   \label{Counter:Name}
    \index[dir]{Name}
    \index[dir]{Directive!Name}
    The name of the Counter.  This is the name you will use in the variable
 expansion  to reference the counter value.  
 
 \item [Minimum = \lt{}integer\gt{}]
+   \label{Counter:Minimum}
    \index[dir]{Minimum}
    \index[dir]{Directive!Minimum}
    This specifies the minimum  value that the counter can have. It also becomes
 the default.  If not supplied, zero is assumed.  
 
 \item [Maximum = \lt{}integer\gt{}]
+   \label{Counter:Maximum}
    \index[dir]{Maximum}
    \index[dir]{Directive!Maximum}
    \index[dir]{Directive!Maximum}
@@ -3626,6 +3778,7 @@ the 31 power). When the counter is incremented past  this value, it is reset
 to the Minimum.  
 
 \item [*WrapCounter = \lt{}counter-name\gt{}]
+   \label{Counter:*WrapCounter}
    \index[dir]{*WrapCounter}
    \index[dir]{Directive!*WrapCounter}
    If this value  is specified, when the counter is incremented past the
@@ -3634,6 +3787,7 @@ and thus reset to the minimum, the counter specified on the  {\bf WrapCounter}
 is incremented. (This is not currently  implemented). 
 
 \item [Catalog = \lt{}catalog-name\gt{}]
+   \label{Counter:Catalog}
    \index[dir]{Catalog}
    \index[dir]{Directive!Catalog}
    If this directive is  specified, the counter and its values will be saved in