From: uz Date: Thu, 4 Feb 2010 19:19:17 +0000 (+0000) Subject: New extended memory driver for the C256K memory extension. Written and X-Git-Tag: V2.13.2~24 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=37fbe08df22ac0fe4ad528dfa49548208c4033c8;p=cc65 New extended memory driver for the C256K memory extension. Written and contributed by Marco van den Heuvel with several changes by me. git-svn-id: svn://svn.cc65.org/cc65/trunk@4577 b7a2c559-68d2-44c3-8de9-860c34a00d81 --- diff --git a/doc/c64.sgml b/doc/c64.sgml index e91288211..eca6cec01 100644 --- a/doc/c64.sgml +++ b/doc/c64.sgml @@ -165,6 +165,10 @@ configuration. + + A driver for the C64 256K memory expansion. This driver offers 768 pages of + 256 bytes each. Written and contributed by Marco van den Heuvel. + A driver for the Berkeley Softworks GeoRam cartridge. The driver will determine the available RAM from the connected cartridge. It supports 64KB diff --git a/libsrc/c64/Makefile b/libsrc/c64/Makefile index 747516a8a..126807676 100644 --- a/libsrc/c64/Makefile +++ b/libsrc/c64/Makefile @@ -71,7 +71,8 @@ OBJS = _scrsize.o \ #-------------------------------------------------------------------------- # Drivers -EMDS = c64-georam.emd \ +EMDS = c64-c256k.emd \ + c64-georam.emd \ c64-isepic.emd \ c64-ram.emd \ c64-ramcart.emd \ diff --git a/libsrc/c64/c64-c256k.s b/libsrc/c64/c64-c256k.s new file mode 100755 index 000000000..0578f337b --- /dev/null +++ b/libsrc/c64/c64-c256k.s @@ -0,0 +1,506 @@ +; +; Extended memory driver for the C256K memory expansion +; Marco van den Heuvel, 2010-01-27 +; + + .include "zeropage.inc" + + .include "em-kernel.inc" + .include "em-error.inc" + + + .macpack generic + + +; ------------------------------------------------------------------------ +; Header. Includes jump table + +.segment "JUMPTABLE" + +; Driver signature + + .byte $65, $6d, $64 ; "emd" + .byte EMD_API_VERSION ; EM API version number + +; Jump table. + + .word INSTALL + .word UNINSTALL + .word PAGECOUNT + .word MAP + .word USE + .word COMMIT + .word COPYFROM + .word COPYTO + +; ------------------------------------------------------------------------ +; Constants + +BASE = $4000 +PAGES = 3 * 256 +CHECKC256K = $0200 +TRANSFERC256K = $0200 +STASHOPCODE = $91 +pia = $DFC0 + +; ------------------------------------------------------------------------ +; Data. + +.data + + +; This function is used to copy code from and to the extended memory +.proc c256kcopycode +.org ::TRANSFERC256K ; Assemble for target location + stx pia +::STASHC256K := * ; Location and opcode is patched at runtime +::VECC256K := *+1 + lda ($00),y + ldx #$dc + stx pia + rts +.reloc +.endproc + +; This function is used to check for the existence of the extended memory +.proc c256kcheckcode +.org ::CHECKC256K + ldy #$00 ; Assume hardware not present + + lda #$fc + sta pia + lda $01 + tax + and #$f8 + sta $01 + lda $4000 + cmp $c000 + bne done ; Jump if not found + inc $c000 + cmp $4000 + beq done ; Jump if not found + + ; Hardware is present + iny +done: stx $01 + ldx #$dc + stx pia + rts +.reloc +.endproc + +; Since the functions above are copied to $200, the current contents of this +; memory area must be saved into backup storage. Calculate the amount of +; space necessary. +.if .sizeof (c256kcopycode) > .sizeof (c256kcheckcode) +backupspace = .sizeof (c256kcopycode) +.else +backupspace = .sizeof (c256kcheckcode) +.endif + + +.bss + +curpage: .res 2 ; Current page number +curbank: .res 1 ; Current bank +backup: .res backupspace ; Backup area of data in the location + ; where the copy and check routines will be +window: .res 256 ; Memory "window" + + +.code +; ------------------------------------------------------------------------ +; INSTALL routine. Is called after the driver is loaded into memory. If +; possible, check if the hardware is present and determine the amount of +; memory available. +; Must return an EM_ERR_xx code in a/x. +; + +INSTALL: + lda pia+1 ; Select Peripheral Registers + ora #4 + sta pia+1 + tax + lda pia+3 + ora #4 + sta pia+3 + tay + + lda #$DC ; Set the default memory bank data + sta pia + lda #$FE + sta pia+2 + + txa ; Select Data Direction Registers + and #$FB + sta pia+1 + tya + and #$FB + sta pia+3 + + lda #$FF ; Set the ports to output + sta pia + sta pia+2 + + txa + and #$C7 + ora #$30 ; Set CA1 and + sta pia+1 ; select Peripheral Registers + sty pia+3 + + jsr backup_and_setup_check_routine + jsr CHECKC256K + cli + ldx #$29 + jsr restore_data + cpy #$01 + beq @present + lda #EM_ERR_NO_DEVICE + rts + +@present: + lda #EM_ERR_OK +; rts ; Run into UNINSTALL instead + +; ------------------------------------------------------------------------ +; UNINSTALL routine. Is called before the driver is removed from memory. +; Can do cleanup or whatever. Must not return anything. +; + +UNINSTALL: + rts + + +; ------------------------------------------------------------------------ +; PAGECOUNT: Return the total number of available pages in a/x. +; + +PAGECOUNT: + lda #PAGES + rts + +; ------------------------------------------------------------------------ +; MAP: Map the page in a/x into memory and return a pointer to the page in +; a/x. The contents of the currently mapped page (if any) may be discarded +; by the driver. +; + +MAP: + sei + sta curpage ; Remember the new page + stx curpage+1 + jsr adjust_page_and_bank + stx curbank + clc + adc #>BASE + sta ptr1+1 + ldy #0 + sty ptr1 + jsr backup_and_setup_copy_routine + ldx #window ; Return the window address + cli + rts + +; ------------------------------------------------------------------------ +; USE: Tell the driver that the window is now associated with a given page. + +USE: sta curpage ; Remember the page + stx curpage+1 + lda #window ; Return the window + rts + +; ------------------------------------------------------------------------ +; COMMIT: Commit changes in the memory window to extended storage. + +COMMIT: + sei + lda curpage ; Get the current page + ldx curpage+1 + + jsr adjust_page_and_bank + stx curbank + clc + adc #>BASE + sta ptr1+1 + ldy #0 + sty ptr1 + jsr backup_and_setup_copy_routine + ldx #BASE + sta ptr4+1 + lda tmp2 + clc + adc #$10 + sta tmp2 + jmp @L3 + +; ------------------------------------------------------------------------ +; COPYTO: Copy from linear into extended memory. A pointer to a structure +; describing the request is passed in a/x. +; The function must not return anything. +; + +COPYTO: + sei + jsr setup + jsr backup_and_setup_copy_routine + +; Setup is: +; +; - ptr1 contains the struct pointer +; - ptr2 contains the linear memory buffer +; - ptr3 contains -(count-1) +; - ptr4 contains the page memory buffer plus offset +; - tmp1 contains zero (to be used for linear memory buffer offset) +; - tmp2 contains the bank value + + lda #BASE + sta ptr4+1 + lda tmp2 + clc + adc #$10 + sta tmp2 + jmp @L3 + +; ------------------------------------------------------------------------ +; Helper function for COPYFROM and COPYTO: Store the pointer to the request +; structure and prepare data for the copy + +setup: + sta ptr1 + stx ptr1+1 ; Save passed pointer + +; Get the page number from the struct and adjust it so that it may be used +; with the hardware. That is: ptr4 has the page address and page offset +; tmp2 will hold the bank value + + ldy #EM_COPY::PAGE+1 + lda (ptr1),y + tax + ldy #EM_COPY::PAGE + lda (ptr1),y + jsr adjust_page_and_bank + clc + adc #>BASE + sta ptr4+1 + stx tmp2 + +; Get the buffer pointer into ptr2 + + ldy #EM_COPY::BUF + lda (ptr1),y + sta ptr2 + iny + lda (ptr1),y + sta ptr2+1 + +; Get the count, calculate -(count-1) and store it into ptr3 + + ldy #EM_COPY::COUNT + lda (ptr1),y + eor #$FF + sta ptr3 + iny + lda (ptr1),y + eor #$FF + sta ptr3+1 + +; Get the page offset into ptr4 and clear tmp1 + + ldy #EM_COPY::OFFS + lda (ptr1),y + sta ptr4 + lda #0 + sta tmp1 + +; Done + + rts + +; Helper routines for copying to and from the +256k ram + +backup_and_setup_copy_routine: + ldx #.sizeof (c256kcopycode) - 1 +@L1: + lda TRANSFERC256K,x + sta backup,x + lda c256kcopycode,x + sta TRANSFERC256K,x + dex + bpl @L1 + rts + +backup_and_setup_check_routine: + ldx #.sizeof (c256kcheckcode) - 1 +@L1: + lda CHECKC256K,x + sta backup,x + lda c256kcheckcode,x + sta CHECKC256K,x + dex + bpl @L1 + rts + +restore_data: + lda backup,x + sta CHECKC256K,x + dex + bpl restore_data + rts + +; Helper routine to correct for the bank and page +adjust_page_and_bank: + sta tmp4 + lda #$0C + sta tmp3 + lda tmp4 + and #$c0 + lsr + lsr + ora tmp3 + sta tmp3 + txa + asl + asl + asl + asl + asl + asl + ora tmp3 + tax + lda tmp4 + and #$3f + rts