From: Valentin Longchamp Date: Tue, 17 Nov 2015 09:53:36 +0000 (+0100) Subject: km8309: change the default QE_FW address X-Git-Tag: v2016.01-rc2~251 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=38467df5d67a61a8ccd8d052249e195e0fe9ab07;p=u-boot km8309: change the default QE_FW address It should be after the u-boot reserved sectors and before the env sectors, since the solution used for kmvect1 (tell the linker to put the firmware into the u-boot produced binary, at the end of the area) should be the exception. The #define is only "conditional" so that we can still support kmvect1. Signed-off-by: Valentin Longchamp --- diff --git a/include/configs/km/km8309-common.h b/include/configs/km/km8309-common.h index c880b4a9b5..d21b500d74 100644 --- a/include/configs/km/km8309-common.h +++ b/include/configs/km/km8309-common.h @@ -28,8 +28,10 @@ /* QE microcode/firmware address */ #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -/* at end of uboot partition, before env */ -#define CONFIG_SYS_QE_FW_ADDR 0xF00B0000 +/* between the u-boot partition and env */ +#ifndef CONFIG_SYS_QE_FW_ADDR +#define CONFIG_SYS_QE_FW_ADDR 0xF00C0000 +#endif /* * System IO Config