From: Øyvind Harboe Date: Mon, 5 Mar 2012 20:37:14 +0000 (+0100) Subject: ecosboard: delete bit-rotted eCos code X-Git-Tag: v0.6.0-rc1~192 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=39650e22;p=openocd ecosboard: delete bit-rotted eCos code Change-Id: Iff7943eb9da3f41dcc45492acd0f36cf63b3497f Signed-off-by: Øyvind Harboe Reviewed-on: http://openocd.zylin.com/503 Reviewed-by: Øyvind Harboe Tested-by: jenkins --- diff --git a/README b/README index f49dd31f..c6186b23 100644 --- a/README +++ b/README @@ -249,7 +249,6 @@ options may be available there: --enable-ep93xx Enable building support for EP93xx based SBCs --enable-at91rm9200 Enable building support for AT91RM9200 based SBCs - --enable-ecosboard Enable building support for eCos based JTAG debugger --enable-zy1000 Enable ZY1000 interface --enable-minidriver-dummy diff --git a/configure.ac b/configure.ac index 0b337129..0a9a6586 100644 --- a/configure.ac +++ b/configure.ac @@ -396,10 +396,6 @@ AC_ARG_ENABLE([amtjtagaccel], AS_HELP_STRING([--enable-amtjtagaccel], [Enable building the Amontec JTAG-Accelerator driver]), [build_amtjtagaccel=$enableval], [build_amtjtagaccel=no]) -AC_ARG_ENABLE([ecosboard], - AS_HELP_STRING([--enable-ecosboard], [Enable building support for eCos based JTAG debugger]), - [build_ecosboard=$enableval], [build_ecosboard=no]) - AC_ARG_ENABLE([zy1000_master], AS_HELP_STRING([--enable-zy1000-master], [Use ZY1000 JTAG master registers]), [build_zy1000_master=$enableval], [build_zy1000_master=no]) @@ -632,12 +628,6 @@ else AC_DEFINE([BUILD_EP93XX], [0], [0 if you don't want ep93xx.]) fi -if test $build_ecosboard = yes; then - AC_DEFINE([BUILD_ECOSBOARD], [1], [1 if you want eCosBoard.]) -else - AC_DEFINE([BUILD_ECOSBOARD], [0], [0 if you don't want eCosBoard.]) -fi - if test $build_zy1000 = yes; then AC_DEFINE([BUILD_ZY1000], [1], [1 if you want ZY1000.]) else @@ -1104,7 +1094,6 @@ AM_CONDITIONAL([PARPORT], [test $build_parport = yes]) AM_CONDITIONAL([DUMMY], [test $build_dummy = yes]) AM_CONDITIONAL([GIVEIO], [test x$parport_use_giveio = xyes]) AM_CONDITIONAL([EP93XX], [test $build_ep93xx = yes]) -AM_CONDITIONAL([ECOSBOARD], [test $build_ecosboard = yes]) AM_CONDITIONAL([ZY1000], [test $build_zy1000 = yes]) AM_CONDITIONAL([ZY1000_MASTER], [test $build_zy1000_master = yes]) AM_CONDITIONAL([IOUTIL], [test $build_ioutil = yes]) diff --git a/src/Makefile.am b/src/Makefile.am index 3a92fffe..c78e81c8 100644 --- a/src/Makefile.am +++ b/src/Makefile.am @@ -15,11 +15,7 @@ SUBDIRS = \ lib_LTLIBRARIES = libopenocd.la bin_PROGRAMS = openocd -if ECOSBOARD -MAINFILE = ecosboard.c -else MAINFILE = main.c -endif openocd_SOURCES = $(MAINFILE) openocd_LDADD = libopenocd.la diff --git a/src/ecosboard.c b/src/ecosboard.c deleted file mode 100644 index 0805e6fc..00000000 --- a/src/ecosboard.c +++ /dev/null @@ -1,1670 +0,0 @@ -/*************************************************************************** - * Copyright (C) 2007-2010 by Øyvind Harboe * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License as published by * - * the Free Software Foundation; either version 2 of the License, or * - * (at your option) any later version. * - * * - * This program is distributed in the hope that it will be useful, * - * but WITHOUT ANY WARRANTY; without even the implied warranty of * - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * - * GNU General Public License for more details. * - * * - * You should have received a copy of the GNU General Public License * - * along with this program; if not, write to the * - * Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - ***************************************************************************/ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include - -#include -#include -#include -#include -#include -#include - -#include -#include // Address of JFFS2 -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "rom.h" - -#ifdef CYGPKG_HAL_NIOS2 -#include -#define ZY1000_SER_DEV "/dev/uart_0" -#else -#define ZY1000_SER_DEV "/dev/ser0" - -#endif - - -#define MAX_IFS 64 -#if defined(CYGPKG_NET_FREEBSD_STACK) -#include -/* posix compatibility broken*/ -struct tftpd_fileops fileops = -{ - (int (*)(const char *, int))open, - close, - (int (*)(int, const void *, int))write, - (int (*)(int, void *, int))read -}; - -#endif - - -void diag_write(char *buf, int len) -{ - int j; - for (j = 0; j < len; j++) - { - diag_printf("%c", buf[j]); - } -} - -static bool serialLog = true; -static bool writeLog = true; - -char hwaddr[512]; - -#ifdef CYGPKG_PROFILE_GPROF -#include - -extern char _stext, _etext; // Defined by the linker - -static char *start_of_code=&_stext; -static char *end_of_code=&_etext; - -void start_profile(void) -{ - // This starts up the system-wide profiling, gathering - // profile information on all of the code, with a 16 byte - // "bucket" size, at a rate of 100us/profile hit. - // Note: a bucket size of 16 will give pretty good function - // resolution. Much smaller and the buffer becomes - // much too large for very little gain. - // Note: a timer period of 100us is also a reasonable - // compromise. Any smaller and the overhead of - // handling the timter (profile) interrupt could - // swamp the system. A fast processor might get - // by with a smaller value, but a slow one could - // even be swamped by this value. If the value is - // too large, the usefulness of the profile is reduced. - - // no more interrupts than 1/10ms. - //profile_on((void *)0, (void *)0x40000, 16, 10000); // SRAM - // profile_on(0, &_etext, 16, 10000); // SRAM & DRAM - profile_on(start_of_code, end_of_code, 16, 10000); // Nios DRAM -} -#endif - -static FILE *log; - -static char reboot_stack[2048]; - -static void zylinjtag_reboot(cyg_addrword_t data) -{ - serialLog = true; - diag_printf("Rebooting in 500 ticks..\n"); - cyg_thread_delay(500); - diag_printf("Unmounting /config..\n"); - umount("/config"); - diag_printf("Rebooting..\n"); -#ifdef CYGPKG_HAL_NIOS2 - /* This will reboot & reconfigure the FPGA from the bootloader - * and on. - */ - IOWR(REMOTE_UPDATE_BASE, 0x20, 0x1); -#else - HAL_PLATFORM_RESET(); -#endif -} -static cyg_thread zylinjtag_thread_object; -static cyg_handle_t zylinjtag_thread_handle; - -void reboot(void) -{ - cyg_thread_create(1, zylinjtag_reboot, (cyg_addrword_t) 0, "reboot Thread", - (void *) reboot_stack, sizeof(reboot_stack), - &zylinjtag_thread_handle, &zylinjtag_thread_object); - cyg_thread_resume(zylinjtag_thread_handle); -} - -static char zylinjtag_reboot_port_stack[2048]; -static cyg_thread zylinjtag_reboot_port_thread_object; -static cyg_handle_t zylinjtag_reboot_port_thread_handle; - -static void zylinjtag_reboot_port_task(cyg_addrword_t data) -{ - int so_reuseaddr_option = 1; - - int fd; - if ((fd = socket(AF_INET, SOCK_STREAM, 0)) == -1) - { - LOG_ERROR("error creating socket: %s", strerror(errno)); - exit(-1); - } - - setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, (void*) &so_reuseaddr_option, - sizeof(int)); - - struct sockaddr_in sin; - unsigned int address_size; - address_size = sizeof(sin); - memset(&sin, 0, sizeof(sin)); - sin.sin_family = AF_INET; - sin.sin_addr.s_addr = INADDR_ANY; - sin.sin_port = htons(1234); - - if (bind(fd, (struct sockaddr *) &sin, sizeof(sin)) == -1) - { - LOG_ERROR("couldn't bind to socket: %s", strerror(errno)); - exit(-1); - } - - if (listen(fd, 1) == -1) - { - LOG_ERROR("couldn't listen on socket: %s", strerror(errno)); - exit(-1); - } - // socket_nonblock(fd); - - - accept(fd, (struct sockaddr *) &sin, &address_size); - - diag_printf("Got reboot signal on port 1234"); - - reboot(); - -} - -void reboot_port(void) -{ - cyg_thread_create(1, zylinjtag_reboot_port_task, (cyg_addrword_t) 0, "wait for reboot signal on port 1234", - (void *) zylinjtag_reboot_port_stack, sizeof(zylinjtag_reboot_port_stack), - &zylinjtag_reboot_port_thread_handle, &zylinjtag_reboot_port_thread_object); - cyg_thread_resume(zylinjtag_reboot_port_thread_handle); -} - -int configuration_output_handler(struct command_context *context, - const char* line) -{ - diag_printf("%s", line); - - return ERROR_OK; -} - -int zy1000_configuration_output_handler_log(struct command_context *context, - const char* line) -{ - LOG_USER_N("%s", line); - - return ERROR_OK; -} - -#ifdef CYGPKG_PROFILE_GPROF -//extern int64_t totaltime; - -static int zylinjtag_Jim_Command_profile(Jim_Interp *interp, int argc, - Jim_Obj * const *argv) -{ - if ((argc == 2) && (strcmp(Jim_GetString(argv[1], NULL), "stats")==0)) - { -// profile_off(); - //LOG_USER("Stats %dms sleeping in select()", (int)totaltime); - } else - { - LOG_USER("Profiling started"); - start_profile(); - //totaltime = 0; - } - return ERROR_OK; -} - -#endif - -externC void phi_init_all_network_interfaces(void); - -struct command_context *cmd_ctx; - -static bool webRunning = false; - -void keep_webserver(void) -{ - // Target initialisation is only attempted at startup, so we sleep forever and - // let the http server bail us out(i.e. get config files set up). - diag_printf("OpenOCD has invoked exit().\n" - "Use web server to correct any configuration settings and reboot.\n"); - if (!webRunning) - reboot(); - - // exit() will terminate the current thread and we we'll then sleep eternally or - // we'll have a reboot scheduled. -} - -extern void printDccChar(char c); - -static char logBuffer[128 * 1024]; -static const int logSize = sizeof(logBuffer); -int writePtr = 0; -int logCount = 0; - -void _zylinjtag_diag_write_char(char c, void **param) -{ - if (writeLog) - { - logBuffer[writePtr] = c; - writePtr = (writePtr + 1) % logSize; - logCount++; - } - if (serialLog) - { - if (c == '\n') - { - HAL_DIAG_WRITE_CHAR('\r'); - } - HAL_DIAG_WRITE_CHAR(c); - } - -#ifdef CYGPKG_HAL_ZYLIN_PHI - printDccChar(c); -#endif -} - -void copyfile(char *name2, char *name1); - -void copydir(char *name, char *destdir); - -#if 0 -MTAB_ENTRY(romfs_mte1, - "/rom", - "romfs", - "", - (CYG_ADDRWORD) &filedata[0]); -#endif - -void openocd_sleep_prelude(void) -{ - cyg_mutex_unlock(&httpstate.jim_lock); -} - -void openocd_sleep_postlude(void) -{ - cyg_mutex_lock(&httpstate.jim_lock); -} - -void format(void) -{ -#ifdef CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 - diag_printf("Formatting JFFS2...\n"); - - cyg_io_handle_t handle; - - Cyg_ErrNo err; - err = cyg_io_lookup(CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1, &handle); - if (err != ENOERR) - { - diag_printf("Flash Error cyg_io_lookup: %d\n", err); - reboot(); - } - - cyg_uint32 len; - cyg_io_flash_getconfig_devsize_t ds; - len = sizeof(ds); - err = cyg_io_get_config(handle, CYG_IO_GET_CONFIG_FLASH_DEVSIZE, &ds, &len); - if (err != ENOERR) - { - diag_printf("Flash error cyg_io_get_config %d\n", err); - reboot(); - } - - cyg_io_flash_getconfig_erase_t e; - len = sizeof(e); - - e.offset = 0; - e.len = ds.dev_size; - - diag_printf("Formatting 0x%08x bytes\n", (int)ds.dev_size); - err = cyg_io_get_config(handle, CYG_IO_GET_CONFIG_FLASH_ERASE, &e, &len); - if (err != ENOERR) - { - diag_printf("Flash erase error %d offset 0x%08x\n", err, e.err_address); - reboot(); - } - - diag_printf("Flash formatted successfully\n"); -#endif - - reboot(); -} - -static int zylinjtag_Jim_Command_format_jffs2(Jim_Interp *interp, int argc, - Jim_Obj * const *argv) -{ - if (argc != 1) - { - return JIM_ERR; - } - - format(); - for (;;) - ; -} - -static int zylinjtag_Jim_Command_threads(Jim_Interp *interp, int argc, - Jim_Obj * const *argv) -{ - cyg_handle_t thread = 0; - cyg_uint16 id = 0; - Jim_Obj *threads = Jim_NewListObj(interp, NULL, 0); - - /* Loop over the threads, and generate a table row for - * each. - */ - while (cyg_thread_get_next(&thread, &id)) - { - Jim_Obj *threadObj = Jim_NewListObj(interp, NULL, 0); - - cyg_thread_info info; - char *state_string; - - cyg_thread_get_info(thread, id, &info); - - if (info.name == NULL) - info.name = ""; - - Jim_ListAppendElement(interp, threadObj, Jim_NewStringObj(interp, - info.name, strlen(info.name))); - - /* Translate the state into a string. - */ - if (info.state == 0) - state_string = "RUN"; - else if (info.state & 0x04) - state_string = "SUSP"; - else - switch (info.state & 0x1b) - { - case 0x01: - state_string = "SLEEP"; - break; - case 0x02: - state_string = "CNTSLEEP"; - break; - case 0x08: - state_string = "CREATE"; - break; - case 0x10: - state_string = "EXIT"; - break; - default: - state_string = "????"; - break; - } - - Jim_ListAppendElement(interp, threadObj, Jim_NewStringObj(interp, - state_string, strlen(state_string))); - - Jim_ListAppendElement(interp, threadObj, Jim_NewIntObj(interp, id)); - Jim_ListAppendElement(interp, threadObj, Jim_NewIntObj(interp, - info.set_pri)); - Jim_ListAppendElement(interp, threadObj, Jim_NewIntObj(interp, - info.cur_pri)); - - Jim_ListAppendElement(interp, threads, threadObj); - } - Jim_SetResult(interp, threads); - - return JIM_OK; -} - -static int zylinjtag_Jim_Command_log(Jim_Interp *interp, int argc, - Jim_Obj * const *argv) -{ - Jim_Obj *tclOutput = Jim_NewStringObj(interp, "", 0); - - if (logCount >= logSize) - { - Jim_AppendString(httpstate.jim_interp, tclOutput, logBuffer + logCount - % logSize, logSize - logCount % logSize); - } - Jim_AppendString(httpstate.jim_interp, tclOutput, logBuffer, writePtr); - - Jim_SetResult(interp, tclOutput); - return JIM_OK; -} - -static int zylinjtag_Jim_Command_reboot(Jim_Interp *interp, int argc, - Jim_Obj * const *argv) -{ - reboot(); - return JIM_OK; -} - -static void zylinjtag_startNetwork(void) -{ - // Bring TCP/IP up immediately before we're ready to accept commands. - // - // That is as soon as a PING responds, we're accepting telnet sessions. -#if defined(CYGPKG_NET_FREEBSD_STACK) - phi_init_all_network_interfaces(); -#else - lwip_init(); -#endif - if (!eth0_up) - { - diag_printf("Network not up and running\n"); - exit(-1); - } - - /* very first thing we want is a reboot capability */ - reboot_port(); - -#if defined(CYGPKG_NET_FREEBSD_STACK) - /*start TFTP*/ - tftpd_start(69, &fileops); -#endif - - cyg_httpd_init_tcl_interpreter(); - - // Kludge! Why can't I do this from httpd.c??? I get linker errors... - // some of that --start/end-group stuff? - Jim_InitStaticExtensions(httpstate.jim_interp); - - Jim_CreateCommand(httpstate.jim_interp, "log", zylinjtag_Jim_Command_log, - NULL, NULL); - Jim_CreateCommand(httpstate.jim_interp, "zy1000_reboot", - zylinjtag_Jim_Command_reboot, NULL, NULL); - Jim_CreateCommand(httpstate.jim_interp, "threads", - zylinjtag_Jim_Command_threads, NULL, NULL); - Jim_CreateCommand(httpstate.jim_interp, "format_jffs2", - zylinjtag_Jim_Command_format_jffs2, NULL, NULL); - - cyg_httpd_start(); - - webRunning = true; - - diag_printf("Web server running\n"); - - int s; - struct ifreq ifr; - s = socket(AF_INET, SOCK_DGRAM, 0); - if (s >= 0) - { - strcpy(ifr.ifr_name, "eth0"); - int res; - res = ioctl(s, SIOCGIFHWADDR, &ifr); - close(s); - - if (res < 0) - { - diag_printf("Can't obtain MAC address\n"); - reboot(); - } - } - - sprintf(hwaddr, "%02x:%02x:%02x:%02x:%02x:%02x", - (int) ((unsigned char *) &ifr.ifr_hwaddr.sa_data)[0], - (int) ((unsigned char *) &ifr.ifr_hwaddr.sa_data)[1], - (int) ((unsigned char *) &ifr.ifr_hwaddr.sa_data)[2], - (int) ((unsigned char *) &ifr.ifr_hwaddr.sa_data)[3], - (int) ((unsigned char *) &ifr.ifr_hwaddr.sa_data)[4], - (int) ((unsigned char *) &ifr.ifr_hwaddr.sa_data)[5]); - - discover_message - = alloc_printf("ZY1000 Zylin JTAG debugger MAC %s", hwaddr); - - discover_launch(); -} - -static void print_exception_handler(cyg_addrword_t data, cyg_code_t exception, - cyg_addrword_t info) -{ - writeLog = false; - serialLog = true; - char *infoStr = "unknown"; - switch (exception) - { -#ifdef CYGNUM_HAL_VECTOR_UNDEF_INSTRUCTION - case CYGNUM_HAL_VECTOR_UNDEF_INSTRUCTION: - infoStr = "undefined instruction"; - break; - case CYGNUM_HAL_VECTOR_SOFTWARE_INTERRUPT: - infoStr = "software interrupt"; - break; - case CYGNUM_HAL_VECTOR_ABORT_PREFETCH: - infoStr = "abort prefetch"; - break; - case CYGNUM_HAL_VECTOR_ABORT_DATA: - infoStr = "abort data"; - break; -#endif - default: - break; - } - - diag_printf("Exception: %08x(%s) %08x\n", exception, infoStr, info); - - diag_printf("Dumping log\n---\n"); - if (logCount >= logSize) - { - diag_write(logBuffer + logCount % logSize, logSize - logCount % logSize); - } - diag_write(logBuffer, writePtr); - - diag_printf("---\nLogdump complete.\n"); - diag_printf("Exception: %08x(%s) %08x\n", exception, infoStr, info); - diag_printf("\n---\nRebooting\n"); - HAL_PLATFORM_RESET(); - -} - -#ifdef CYGNUM_HAL_VECTOR_UNDEF_INSTRUCTION -static void setHandler(cyg_code_t exception) -{ - cyg_exception_handler_t *old_handler; - cyg_addrword_t old_data; - - cyg_exception_set_handler(exception, print_exception_handler, 0, - &old_handler, &old_data); -} -#endif - -static cyg_thread zylinjtag_uart_thread_object; -static cyg_handle_t zylinjtag_uart_thread_handle; -static char uart_stack[4096]; - -static char forwardBuffer[1024]; // NB! must be smaller than a TCP/IP packet!!!!! -static char backwardBuffer[1024]; - -void setNoDelay(int session, int flag) -{ -#if 1 - // This decreases latency dramatically for e.g. GDB load which - // does not have a sliding window protocol - // - // Can cause *lots* of TCP/IP packets to be sent and it would have - // to be enabled/disabled on the fly to avoid the CPU being - // overloaded... - setsockopt(session, /* socket affected */ - IPPROTO_TCP, /* set option at TCP level */ - TCP_NODELAY, /* name of option */ - (char *) &flag, /* the cast is historical - cruft */ - sizeof(int)); /* length of option value */ -#endif -} - -#define TEST_TCPIP() 0 - -#if TEST_TCPIP -struct -{ - int req; - int actual; - int req2; - int actual2; -} tcpipSent[512 * 1024]; -int cur; -#endif - -static void zylinjtag_uart(cyg_addrword_t data) -{ - int so_reuseaddr_option = 1; - - int fd; - if ((fd = socket(AF_INET, SOCK_STREAM, 0)) == -1) - { - LOG_ERROR("error creating socket: %s", strerror(errno)); - exit(-1); - } - - setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, (void*) &so_reuseaddr_option, - sizeof(int)); - - struct sockaddr_in sin; - unsigned int address_size; - address_size = sizeof(sin); - memset(&sin, 0, sizeof(sin)); - sin.sin_family = AF_INET; - sin.sin_addr.s_addr = INADDR_ANY; - sin.sin_port = htons(5555); - - if (bind(fd, (struct sockaddr *) &sin, sizeof(sin)) == -1) - { - LOG_ERROR("couldn't bind to socket: %s", strerror(errno)); - exit(-1); - } - - if (listen(fd, 1) == -1) - { - LOG_ERROR("couldn't listen on socket: %s", strerror(errno)); - exit(-1); - } - // socket_nonblock(fd); - - - for (;;) - { - int session = accept(fd, (struct sockaddr *) &sin, &address_size); - if (session < 0) - { - continue; - } - - setNoDelay(session, 1); - int oldopts = fcntl(session, F_GETFL, 0); - fcntl(session, F_SETFL, oldopts | O_NONBLOCK); // - - int serHandle = open(ZY1000_SER_DEV, O_RDWR | O_NONBLOCK); - if (serHandle < 0) - { - close(session); - continue; - } - -#ifdef CYGPKG_PROFILE_GPROF - start_profile(); -#endif - size_t actual = 0; - size_t actual2 = 0; - size_t pos, pos2; - pos = 0; - pos2 = 0; -#if TEST_TCPIP - cur = 0; -#endif - for (;;) - { - fd_set write_fds; - fd_set read_fds; - FD_ZERO(&write_fds); - FD_ZERO(&read_fds); - int fd_max = -1; - FD_SET(session, &read_fds); - fd_max = session; - FD_SET(serHandle, &read_fds); - if (serHandle > fd_max) - { - fd_max = serHandle; - } - /* Wait... */ - - cyg_thread_delay(5); // 50ms fixed delay to wait for data to be sent/received - if ((actual == 0) && (actual2 == 0)) - { - int retval = select(fd_max + 1, &read_fds, NULL, NULL, NULL); - if (retval <= 0) - { - break; - } - } - - if (actual2 <= 0) - { - memset(backwardBuffer, 's', sizeof(backwardBuffer)); - int t; - t = read(serHandle, backwardBuffer, - sizeof(backwardBuffer)); - actual2 = t; - if (t < 0) - { - if (errno != EAGAIN) - { - goto closeSession; - } - actual2 = 0; - } - pos2 = 0; - } - - size_t y = 0; - if (actual2 > 0) - { - int written = write(session, backwardBuffer + pos2, actual2); - if (written <= 0) - goto closeSession; - actual2 -= written; - pos2 += written; - y = written; - } - - if (FD_ISSET(session, &read_fds) - && (sizeof(forwardBuffer) > actual)) - { - // NB! Here it is important that we empty the TCP/IP read buffer - // to make transmission tick right - memmove(forwardBuffer, forwardBuffer + pos, actual); - pos = 0; - int t; - // this will block if there is no data at all - t = read_socket(session, forwardBuffer + actual, - sizeof(forwardBuffer) - actual); - if (t <= 0) - { - goto closeSession; - } - actual += t; - } - - int y2 = 0; - if (actual > 0) - { - /* Do not put things into the serial buffer if it has something to send - * as that can cause a single byte to be sent at the time. - * - * - */ - int written = write(serHandle, forwardBuffer + pos, actual); - if (written < 0) - { - if (errno != EAGAIN) - { - goto closeSession; - } - // The serial buffer is full - written = 0; - } - else - { - actual -= written; - pos += written; - } - y2 = written; - } -#if TEST_TCPIP - if (cur < 1024) - { - tcpipSent[cur].req = x; - tcpipSent[cur].actual = y; - tcpipSent[cur].req2 = x2; - tcpipSent[cur].actual2 = y2; - cur++; - } -#endif - } - closeSession: close(session); - close(serHandle); - -#if TEST_TCPIP - int i; - for (i = 0; i < 1024; i++) - { - diag_printf("%d %d %d %d\n", tcpipSent[i].req, tcpipSent[i].actual, - tcpipSent[i].req2, tcpipSent[i].actual2); - - } -#endif - } - close(fd); - -} - -void startUart(void) -{ - cyg_thread_create(1, zylinjtag_uart, (cyg_addrword_t) 0, "uart thread", - (void *) uart_stack, sizeof(uart_stack), - &zylinjtag_uart_thread_handle, &zylinjtag_uart_thread_object); - cyg_thread_set_priority(zylinjtag_uart_thread_handle, 1); // low priority as it sits in a busy loop - cyg_thread_resume(zylinjtag_uart_thread_handle); -} - -static int zylinjtag_Jim_Command_uart(Jim_Interp *interp, int argc, - Jim_Obj * const *argv) -{ - static int current_baud = 38400; - if (argc == 1) - { - Jim_SetResult(interp, Jim_NewIntObj(interp, current_baud)); - return JIM_OK; - } - else if (argc != 2) - { - return JIM_ERR; - } - - long new_baudrate; - if (Jim_GetLong(interp, argv[1], &new_baudrate) != JIM_OK) - return JIM_ERR; - - current_baud = new_baudrate; - - int baud; - switch (current_baud) - { - case 9600: - baud = CYGNUM_SERIAL_BAUD_9600; - break; - case 19200: - baud = CYGNUM_SERIAL_BAUD_19200; - break; - case 38400: - baud = CYGNUM_SERIAL_BAUD_38400; - break; - case 57600: - baud = CYGNUM_SERIAL_BAUD_57600; - break; - case 115200: - baud = CYGNUM_SERIAL_BAUD_115200; - break; - case 230400: - baud = CYGNUM_SERIAL_BAUD_230400; - break; - default: - Jim_SetResult(interp, Jim_NewStringObj(interp, "unsupported baudrate", -1)); - return JIM_ERR; - } - - cyg_serial_info_t buf; - cyg_uint32 len = 1; - //get existing serial configuration - len = sizeof(cyg_serial_info_t); - int err; - cyg_io_handle_t serial_handle; - - err = cyg_io_lookup(ZY1000_SER_DEV, &serial_handle); - if (err != ENOERR) - { - Jim_SetResult(interp, Jim_NewStringObj(interp, "Could not open serial port", -1)); - return JIM_ERR; - } - - err = cyg_io_get_config(serial_handle, - CYG_IO_GET_CONFIG_SERIAL_OUTPUT_DRAIN, &buf, &len); - err = cyg_io_get_config(serial_handle, CYG_IO_GET_CONFIG_SERIAL_INFO, &buf, - &len); - if (err != ENOERR) - { - Jim_SetResult(interp, Jim_NewStringObj(interp, "Failed to get serial port settings", -1)); - return JIM_ERR; - } - buf.baud = baud; - - err = cyg_io_set_config(serial_handle, CYG_IO_SET_CONFIG_SERIAL_INFO, &buf, - &len); - if (err != ENOERR) - { - Jim_SetResult(interp, Jim_NewStringObj(interp, "Failed to set serial port settings", -1)); - return JIM_ERR; - } - - return JIM_OK; -} - -bool logAllToSerial = false; - - -int boolParam(char *var); - - -static const char *zylin_config_dir="/config/settings"; - -static int add_default_dirs(void) -{ - add_script_search_dir(zylin_config_dir); - add_script_search_dir("/rom/lib/openocd"); - add_script_search_dir("/rom"); - return ERROR_OK; -} - -int main(int argc, char *argv[]) -{ - /* ramblockdevice will be the same address every time. The deflate app uses a buffer 16mBytes out, so we - * need to allocate towards the end of the heap. */ - -#ifdef CYGNUM_HAL_VECTOR_UNDEF_INSTRUCTION - setHandler(CYGNUM_HAL_VECTOR_UNDEF_INSTRUCTION); - setHandler(CYGNUM_HAL_VECTOR_ABORT_PREFETCH); - setHandler(CYGNUM_HAL_VECTOR_ABORT_DATA); -#endif - - int err; - - atexit(keep_webserver); - - diag_init_putc(_zylinjtag_diag_write_char); - // We want this in the log. -#ifdef CYGPKG_HAL_NIOS2 - diag_printf("Zylin ZY1000 PCB revc.\n"); -#else - diag_printf("Zylin ZY1000 PCB revb.\n"); -#endif - - err = mount("", "/ram", "ramfs"); - if (err < 0) - { - diag_printf("unable to mount ramfs\n"); - } - chdir("/ram"); - - char address[16]; - sprintf(address, "%p", &filedata[0]); - err = mount(address, "/rom", "romfs"); - if (err < 0) - { - diag_printf("unable to mount /rom\n"); - } - - err = mount("", "/log", "logfs"); - if (err < 0) - { - diag_printf("unable to mount logfs\n"); - } - - err = mount("", "/tftp", "tftpfs"); - if (err < 0) - { - diag_printf("unable to mount logfs\n"); - } - - log = fopen("/log/log", "w"); - if (log == NULL) - { - diag_printf("Could not open log file /ram/log\n"); - exit(-1); - } - - - copydir("/rom", "/ram/cgi"); - -#ifdef CYGPKG_HAL_NIOS2 - cyg_flashaddr_t err_address; -#define UNCACHED_EXT_FLASH_BASE (0x80000000 + EXT_FLASH_BASE) - /* The revc flash is locked upon reset, unlock it */ -#ifdef CYGHWR_IO_FLASH_BLOCK_LOCKING - if ((err = flash_unlock((void *) UNCACHED_EXT_FLASH_BASE, EXT_FLASH_SPAN, - (void **) &err_address)) != 0) - { - diag_printf("Error: could not unlock flash\n"); - } -#endif -#endif - - - err = mount("/dev/flash1", "/config", "jffs2"); - if (err < 0) - { - diag_printf("unable to mount jffs2, falling back to ram disk..\n"); - err = mount("", "/config", "ramfs"); - if (err < 0) - { - diag_printf("unable to mount /config as ramdisk.\n"); - reboot(); - } - } - else - { - /* are we using a ram disk instead of a flash disk? This is used - * for ZY1000 live demo... - * - * copy over flash disk to ram block device - */ - if (boolParam("ramdisk")) - { - diag_printf("Unmounting /config from flash and using ram instead\n"); - err = umount("/config"); - if (err < 0) - { - diag_printf("unable to unmount jffs\n"); - reboot(); - } - - err = mount("/dev/flash1", "/config2", "jffs2"); - if (err < 0) - { - diag_printf("unable to mount jffs\n"); - reboot(); - } - - err = mount("", "/config", "ramfs"); - if (err < 0) - { - diag_printf("unable to mount ram block device\n"); - reboot(); - } - - // copydir("/config2", "/config"); - copyfile("/config2/ip", "/config/ip"); - copydir("/config2/settings", "/config/settings"); - - umount("/config2"); - } - } - - mkdir(zylin_config_dir, 0777); - char *dirname = alloc_printf("%s/target", zylin_config_dir); - mkdir(dirname, 0777); - free(dirname); - dirname = alloc_printf("%s/board", zylin_config_dir); - mkdir(dirname, 0777); - free(dirname); - dirname = alloc_printf("%s/event", zylin_config_dir); - mkdir(dirname, 0777); - free(dirname); - - logAllToSerial = boolParam("logserial"); - - // We need the network & web server in case there is something wrong with - // the config files that invoke exit() - zylinjtag_startNetwork(); - - /* we're going to access the jim interpreter from here on... */ - openocd_sleep_postlude(); - startUart(); - - add_default_dirs(); - - /* initialize commandline interface */ - struct command_context * cmd_ctx; - struct command_context *setup_command_handler(Jim_Interp *interp); - cmd_ctx = setup_command_handler(httpstate.jim_interp); - command_set_output_handler(cmd_ctx, configuration_output_handler, NULL); - command_context_mode(cmd_ctx, COMMAND_CONFIG); - - if (util_init(cmd_ctx) != ERROR_OK) - return EXIT_FAILURE; - - if (ioutil_init(cmd_ctx) != ERROR_OK) - return EXIT_FAILURE; - -#ifdef CYGPKG_PROFILE_GPROF - Jim_CreateCommand(httpstate.jim_interp, "zy1000_profile", zylinjtag_Jim_Command_profile, - NULL, NULL); -#endif - - Jim_CreateCommand(httpstate.jim_interp, "zy1000_uart", zylinjtag_Jim_Command_uart, NULL, NULL); - - - log_init(); - - set_log_output(cmd_ctx, log); - - LOG_DEBUG("log init complete"); - - // diag_printf("Executing config files\n"); - - if (logAllToSerial) - { - diag_printf( - "%s/logserial = 1 => sending log output to serial port using \"debug_level 3\" as default.\n", zylin_config_dir); - command_run_line(cmd_ctx, "debug_level 3"); - } - - command_run_linef(cmd_ctx, "script /rom/openocd.cfg"); - - int ret; - ret = server_init(cmd_ctx); - if (ERROR_OK != ret) - return EXIT_FAILURE; - - /* we MUST always run the init command as it will launch telnet sessions */ - command_run_line(cmd_ctx, "init"); - - // FIX!!! Yuk! - // diag_printf() is really invoked from many more places than we trust it - // not to cause instabilities(e.g. invoking fputc() from an interrupt is *BAD*). - // - // Disabling it here is safe and gives us enough logged debug output for now. Crossing - // fingers that it doesn't cause any crashes. - diag_printf("Init complete, GDB & telnet servers launched.\n"); - command_set_output_handler(cmd_ctx, - zy1000_configuration_output_handler_log, NULL); - if (!logAllToSerial) - { - serialLog = false; - } - - /* handle network connections */ - server_loop(cmd_ctx); - openocd_sleep_prelude(); - - /* shut server down */ - server_quit(); - - /* free commandline interface */ - command_done(cmd_ctx); - umount("/config"); - - exit(0); - for (;;) - ; -} - -cyg_int32 cyg_httpd_exec_cgi_tcl(char *file_name); -cyg_int32 homeForm(CYG_HTTPD_STATE *p) -{ - cyg_httpd_exec_cgi_tcl("/ram/cgi/index.tcl"); - return 0; -} - -CYG_HTTPD_HANDLER_TABLE_ENTRY(root_label, "/", homeForm); - -CYG_HTTPD_MIME_TABLE_ENTRY(text_mime_label, "text", "text/plain"); -CYG_HTTPD_MIME_TABLE_ENTRY(bin_mime_label, "bin", "application/octet-stream"); - -#include -#include -#include -#include -#include - -#include // base kernel types -#include // tracing macros -#include // assertion macros -#include -#include -#include - -//========================================================================== -// Eventually we want to eXecute In Place from the ROM in a protected -// environment, so we'll need executables to be aligned to a boundary -// suitable for MMU protection. A suitable boundary would be the 4k -// boundary in all the CPU architectures I am currently aware of. - -// Forward definitions - -// Filesystem operations -static int tftpfs_mount(cyg_fstab_entry *fste, cyg_mtab_entry *mte); -static int tftpfs_umount(cyg_mtab_entry *mte); -static int tftpfs_open(cyg_mtab_entry *mte, cyg_dir dir, const char *name, - int mode, cyg_file *fte); -static int tftpfs_fo_read(struct CYG_FILE_TAG *fp, struct CYG_UIO_TAG *uio); -static int tftpfs_fo_write(struct CYG_FILE_TAG *fp, struct CYG_UIO_TAG *uio); - -// File operations -static int tftpfs_fo_fsync(struct CYG_FILE_TAG *fp, int mode); -static int tftpfs_fo_close(struct CYG_FILE_TAG *fp); -static int tftpfs_fo_lseek(struct CYG_FILE_TAG *fp, off_t *apos, int whence); - -//========================================================================== -// Filesystem table entries - -// ------------------------------------------------------------------------- -// Fstab entry. -// This defines the entry in the filesystem table. -// For simplicity we use _FILESYSTEM synchronization for all accesses since -// we should never block in any filesystem operations. -#if 1 -FSTAB_ENTRY(tftpfs_fste, "tftpfs", 0, - CYG_SYNCMODE_NONE, - tftpfs_mount, - tftpfs_umount, - tftpfs_open, - (cyg_fsop_unlink *)cyg_fileio_erofs, - (cyg_fsop_mkdir *)cyg_fileio_erofs, - (cyg_fsop_rmdir *)cyg_fileio_erofs, - (cyg_fsop_rename *)cyg_fileio_erofs, - (cyg_fsop_link *)cyg_fileio_erofs, - (cyg_fsop_opendir *)cyg_fileio_erofs, - (cyg_fsop_chdir *)cyg_fileio_erofs, - (cyg_fsop_stat *)cyg_fileio_erofs, - (cyg_fsop_getinfo *)cyg_fileio_erofs, - (cyg_fsop_setinfo *)cyg_fileio_erofs); -#endif - -// ------------------------------------------------------------------------- -// mtab entry. -// This defines a single ROMFS loaded into ROM at the configured address -// -// MTAB_ENTRY(rom_mte, // structure name -// "/rom", // mount point -// "romfs", // FIlesystem type -// "", // hardware device -// (CYG_ADDRWORD) CYGNUM_FS_ROM_BASE_ADDRESS // Address in ROM -//); - - -// ------------------------------------------------------------------------- -// File operations. -// This set of file operations are used for normal open files. - -static cyg_fileops tftpfs_fileops = -{ tftpfs_fo_read, tftpfs_fo_write, tftpfs_fo_lseek, - (cyg_fileop_ioctl *) cyg_fileio_erofs, cyg_fileio_seltrue, - tftpfs_fo_fsync, tftpfs_fo_close, - (cyg_fileop_fstat *) cyg_fileio_erofs, - (cyg_fileop_getinfo *) cyg_fileio_erofs, - (cyg_fileop_setinfo *) cyg_fileio_erofs, }; - -// ------------------------------------------------------------------------- -// tftpfs_mount() -// Process a mount request. This mainly finds root for the -// filesystem. - -static int tftpfs_mount(cyg_fstab_entry *fste, cyg_mtab_entry *mte) -{ - return ENOERR; -} - -static int tftpfs_umount(cyg_mtab_entry *mte) -{ - return ENOERR; -} - -struct Tftp -{ - int write; - int readFile; - cyg_uint8 *mem; - int actual; - char *server; - int port; - char *file; -}; - -static void freeTftp(struct Tftp *t) -{ - if (t == NULL) - return; - if (t->mem) - free(t->mem); - if (t->server) - free(t->server); - if (t->file) - free(t->file); - free(t); -} - -static const int tftpMaxSize = 8192 * 1024; -static int tftpfs_open(cyg_mtab_entry *mte, cyg_dir dir, const char *name, - int mode, cyg_file *file) -{ - struct Tftp *tftp; - tftp = malloc(sizeof(struct Tftp)); - if (tftp == NULL) - return EMFILE; - memset(tftp, 0, sizeof(struct Tftp)); - - file->f_flag |= mode & CYG_FILE_MODE_MASK; - file->f_type = CYG_FILE_TYPE_FILE; - file->f_ops = &tftpfs_fileops; - file->f_offset = 0; - file->f_data = 0; - file->f_xops = 0; - - tftp->mem = malloc(tftpMaxSize); - if (tftp->mem == NULL) - { - freeTftp(tftp); - return EMFILE; - } - - char *server = strchr(name, '/'); - if (server == NULL) - { - freeTftp(tftp); - return EMFILE; - } - - tftp->server = malloc(server - name + 1); - if (tftp->server == NULL) - { - freeTftp(tftp); - return EMFILE; - } - strncpy(tftp->server, name, server - name); - tftp->server[server - name] = 0; - - tftp->port = 0; /* default port 69 */ - char *port; - port = strchr(tftp->server, ':'); - if (port != NULL) - { - tftp->port = atoi(port + 1); - *port = 0; - } - - tftp->file = strdup(server + 1); - if (tftp->file == NULL) - { - freeTftp(tftp); - return EMFILE; - } - - file->f_data = (CYG_ADDRWORD) tftp; - - return ENOERR; -} - -static int fetchTftp(struct Tftp *tftp) -{ - if (!tftp->readFile) - { - int err; - tftp->actual = tftp_client_get(tftp->file, tftp->server, tftp->port, tftp->mem, - tftpMaxSize, TFTP_OCTET, &err); - - if (tftp->actual < 0) - { - return EMFILE; - } - tftp->readFile = 1; - } - return ENOERR; -} - -// ------------------------------------------------------------------------- -// tftpfs_fo_write() -// Read data from file. - -static int tftpfs_fo_read(struct CYG_FILE_TAG *fp, struct CYG_UIO_TAG *uio) -{ - struct Tftp *tftp = (struct Tftp *) fp->f_data; - - if (fetchTftp(tftp) != ENOERR) - return EMFILE; - - int i; - off_t pos = fp->f_offset; - int resid = 0; - for (i = 0; i < uio->uio_iovcnt; i++) - { - cyg_iovec *iov = &uio->uio_iov[i]; - char *buf = (char *) iov->iov_base; - off_t len = iov->iov_len; - - if (len + pos > tftp->actual) - { - len = tftp->actual - pos; - } - resid += iov->iov_len - len; - - memcpy(buf, tftp->mem + pos, len); - pos += len; - - } - uio->uio_resid = resid; - fp->f_offset = pos; - - return ENOERR; -} - -static int tftpfs_fo_write(struct CYG_FILE_TAG *fp, struct CYG_UIO_TAG *uio) -{ - struct Tftp *tftp = (struct Tftp *) fp->f_data; - - int i; - off_t pos = fp->f_offset; - int resid = 0; - for (i = 0; i < uio->uio_iovcnt; i++) - { - cyg_iovec *iov = &uio->uio_iov[i]; - char *buf = (char *) iov->iov_base; - off_t len = iov->iov_len; - - if (len + pos > tftpMaxSize) - { - len = tftpMaxSize - pos; - } - resid += iov->iov_len - len; - - memcpy(tftp->mem + pos, buf, len); - pos += len; - - } - uio->uio_resid = resid; - fp->f_offset = pos; - - tftp->write = 1; - - return ENOERR; -} - -static int tftpfs_fo_fsync(struct CYG_FILE_TAG *fp, int mode) -{ - int error = ENOERR; - return error; -} - -// ------------------------------------------------------------------------- -// romfs_fo_close() -// Close a file. We just clear out the data pointer. - -static int tftpfs_fo_close(struct CYG_FILE_TAG *fp) -{ - struct Tftp *tftp = (struct Tftp *) fp->f_data; - int error = ENOERR; - - if (tftp->write) - { - tftp_client_put(tftp->file, tftp->server, 0, tftp->mem, fp->f_offset, - TFTP_OCTET, &error); - } - - freeTftp(tftp); - fp->f_data = 0; - return error; -} - -// ------------------------------------------------------------------------- -// romfs_fo_lseek() -// Seek to a new file position. - -static int tftpfs_fo_lseek(struct CYG_FILE_TAG *fp, off_t *apos, int whence) -{ - struct Tftp *tftp = (struct Tftp *) fp->f_data; - off_t pos = *apos; - - if (fetchTftp(tftp) != ENOERR) - return EMFILE; - - switch (whence) - { - case SEEK_SET: - // Pos is already where we want to be. - break; - - case SEEK_CUR: - // Add pos to current offset. - pos += fp->f_offset; - break; - - case SEEK_END: - // Add pos to file size. - pos += tftp->actual; - break; - - default: - return EINVAL; - } - - // Check that pos is still within current file size, or at the - // very end. - if (pos < 0 || pos > tftp->actual) - return EINVAL; - - // All OK, set fp offset and return new position. - *apos = fp->f_offset = pos; - - return ENOERR; -} - -void usleep(int us) -{ - if (us > 10000) - cyg_thread_delay(us / 10000 + 1); - else - HAL_DELAY_US(us); -} - -// Chunked version. -cyg_int32 show_log_entry(CYG_HTTPD_STATE *phttpstate) -{ - cyg_httpd_start_chunked("text"); - if (logCount >= logSize) - { - cyg_httpd_write_chunked(logBuffer + logCount % logSize, logSize - - logCount % logSize); - } - cyg_httpd_write_chunked(logBuffer, writePtr); - cyg_httpd_end_chunked(); - return -1; -} - -CYG_HTTPD_HANDLER_TABLE_ENTRY(show_log, "/ram/log", show_log_entry); - -// Filesystem operations -static int logfs_mount(cyg_fstab_entry *fste, cyg_mtab_entry *mte); -static int logfs_umount(cyg_mtab_entry *mte); -static int logfs_open(cyg_mtab_entry *mte, cyg_dir dir, const char *name, - int mode, cyg_file *fte); -static int logfs_fo_write(struct CYG_FILE_TAG *fp, struct CYG_UIO_TAG *uio); - -// File operations -static int logfs_fo_fsync(struct CYG_FILE_TAG *fp, int mode); -static int logfs_fo_close(struct CYG_FILE_TAG *fp); - -#include - -//========================================================================== -// Filesystem table entries - -// ------------------------------------------------------------------------- -// Fstab entry. -// This defines the entry in the filesystem table. -// For simplicity we use _FILESYSTEM synchronization for all accesses since -// we should never block in any filesystem operations. -FSTAB_ENTRY(logfs_fste, "logfs", 0, - CYG_SYNCMODE_FILE_FILESYSTEM | CYG_SYNCMODE_IO_FILESYSTEM, - logfs_mount, - logfs_umount, - logfs_open, - (cyg_fsop_unlink *)cyg_fileio_erofs, - (cyg_fsop_mkdir *)cyg_fileio_erofs, - (cyg_fsop_rmdir *)cyg_fileio_erofs, - (cyg_fsop_rename *)cyg_fileio_erofs, - (cyg_fsop_link *)cyg_fileio_erofs, - (cyg_fsop_opendir *)cyg_fileio_erofs, - (cyg_fsop_chdir *)cyg_fileio_erofs, - (cyg_fsop_stat *)cyg_fileio_erofs, - (cyg_fsop_getinfo *)cyg_fileio_erofs, - (cyg_fsop_setinfo *)cyg_fileio_erofs); - -// ------------------------------------------------------------------------- -// File operations. -// This set of file operations are used for normal open files. - -static cyg_fileops logfs_fileops = -{ (cyg_fileop_read *) cyg_fileio_erofs, (cyg_fileop_write *) logfs_fo_write, - (cyg_fileop_lseek *) cyg_fileio_erofs, - (cyg_fileop_ioctl *) cyg_fileio_erofs, cyg_fileio_seltrue, - logfs_fo_fsync, logfs_fo_close, (cyg_fileop_fstat *) cyg_fileio_erofs, - (cyg_fileop_getinfo *) cyg_fileio_erofs, - (cyg_fileop_setinfo *) cyg_fileio_erofs, }; - -// ------------------------------------------------------------------------- -// logfs_mount() -// Process a mount request. This mainly finds root for the -// filesystem. - -static int logfs_mount(cyg_fstab_entry *fste, cyg_mtab_entry *mte) -{ - return ENOERR; -} - -static int logfs_umount(cyg_mtab_entry *mte) -{ - return ENOERR; -} - -static int logfs_open(cyg_mtab_entry *mte, cyg_dir dir, const char *name, - int mode, cyg_file *file) -{ - file->f_flag |= mode & CYG_FILE_MODE_MASK; - file->f_type = CYG_FILE_TYPE_FILE; - file->f_ops = &logfs_fileops; - file->f_offset = 0; - file->f_data = 0; - file->f_xops = 0; - return ENOERR; -} - -// ------------------------------------------------------------------------- -// logfs_fo_write() -// Write data to file. - -static int logfs_fo_write(struct CYG_FILE_TAG *fp, struct CYG_UIO_TAG *uio) -{ - int i; - for (i = 0; i < uio->uio_iovcnt; i++) - { - cyg_iovec *iov = &uio->uio_iov[i]; - char *buf = (char *) iov->iov_base; - off_t len = iov->iov_len; - - diag_write(buf, len); - } - uio->uio_resid = 0; - - return ENOERR; -} -static int logfs_fo_fsync(struct CYG_FILE_TAG *fp, int mode) -{ - return ENOERR; -} - -// ------------------------------------------------------------------------- -// romfs_fo_close() -// Close a file. We just clear out the data pointer. - -static int logfs_fo_close(struct CYG_FILE_TAG *fp) -{ - return ENOERR; -} - -int loadFile(const char *fileName, void **data, int *len); - -/* boolean parameter stored on config */ -int boolParam(char *var) -{ - bool result = false; - char *name = alloc_printf("%s/%s", zylin_config_dir, var); - if (name == NULL) - return result; - - void *data; - int len; - if (loadFile(name, &data, &len) == ERROR_OK) - { - if (len > 1) - len = 1; - result = strncmp((char *) data, "1", len) == 0; - free(data); - } - free(name); - return result; -} - diff --git a/src/helper/Makefile.am b/src/helper/Makefile.am index c9479b43..6189b63a 100644 --- a/src/helper/Makefile.am +++ b/src/helper/Makefile.am @@ -3,13 +3,7 @@ include $(top_srcdir)/common.mk METASOURCES = AUTO noinst_LTLIBRARIES = libhelper.la -if ECOSBOARD -CONFIGFILES = time_support_ecos.c -else CONFIGFILES = options.c time_support_common.c -endif - - libhelper_la_SOURCES = \ binarybuffer.c \ diff --git a/src/helper/command.c b/src/helper/command.c index c218f3fc..fb1a709a 100644 --- a/src/helper/command.c +++ b/src/helper/command.c @@ -31,10 +31,8 @@ #include "config.h" #endif -#if !BUILD_ECOSBOARD /* see Embedder-HOWTO.txt in Jim Tcl project hosted on BerliOS*/ #define JIM_EMBEDDED -#endif /* @todo the inclusion of target.h here is a layering violation */ #include @@ -1280,7 +1278,6 @@ struct command_context *command_init(const char *startup_tcl, Jim_Interp *interp context->output_handler = NULL; context->output_handler_priv = NULL; -#if !BUILD_ECOSBOARD /* Create a jim interpreter if we were not handed one */ if (interp == NULL) { /* Create an interpreter */ @@ -1289,7 +1286,7 @@ struct command_context *command_init(const char *startup_tcl, Jim_Interp *interp Jim_RegisterCoreCommands(interp); Jim_InitStaticExtensions(interp); } -#endif + context->interp = interp; /* Stick to lowercase for HostOS strings. */ @@ -1349,7 +1346,6 @@ int command_context_mode(struct command_context *cmd_ctx, enum command_mode mode void process_jim_events(struct command_context *cmd_ctx) { -#if !BUILD_ECOSBOARD static int recursion; if (recursion) return; @@ -1357,7 +1353,6 @@ void process_jim_events(struct command_context *cmd_ctx) recursion++; Jim_ProcessEvents(cmd_ctx->interp, JIM_ALL_EVENTS | JIM_DONT_WAIT); recursion--; -#endif } #define DEFINE_PARSE_NUM_TYPE(name, type, func, min, max) \ diff --git a/src/helper/command.h b/src/helper/command.h index 01316a1a..7cd5cc4c 100644 --- a/src/helper/command.h +++ b/src/helper/command.h @@ -26,12 +26,6 @@ #include -/* Integrate the JIM TCL interpretor into the command processing. */ -#if BUILD_ECOSBOARD -#include -#include -#endif - #include #include diff --git a/src/helper/ioutil.c b/src/helper/ioutil.c index 4e9d6878..684950d1 100644 --- a/src/helper/ioutil.c +++ b/src/helper/ioutil.c @@ -48,10 +48,8 @@ #include #endif #ifdef HAVE_MALLOC_H -#if !BUILD_ECOSBOARD #include #endif -#endif /* loads a file and returns a pointer to it in memory. The file contains * a 0 byte(sentinel) after len bytes - the length of the file. */ diff --git a/src/helper/replacements.h b/src/helper/replacements.h index 6f2e9595..ceb22584 100644 --- a/src/helper/replacements.h +++ b/src/helper/replacements.h @@ -128,12 +128,8 @@ static inline unsigned usleep(unsigned int usecs) return 0; } #else -#if BUILD_ECOSBOARD -void usleep(int us); -#else #error no usleep defined for your platform #endif -#endif #endif /* HAVE_USLEEP */ /* Windows specific */ diff --git a/src/helper/system.h b/src/helper/system.h index 85e0b1ee..82d0cae7 100644 --- a/src/helper/system.h +++ b/src/helper/system.h @@ -45,9 +45,6 @@ /* --- AC_HEADER_TIME --- */ /* +++ platform specific headers +++ */ -#if BUILD_ECOSBOARD == 1 -#include -#endif #ifdef _WIN32 #include #include diff --git a/src/helper/time_support_ecos.c b/src/helper/time_support_ecos.c deleted file mode 100644 index 110edd24..00000000 --- a/src/helper/time_support_ecos.c +++ /dev/null @@ -1,44 +0,0 @@ -/*************************************************************************** - * Copyright (C) 2006 by Dominic Rath * - * Dominic.Rath@gmx.de * - * * - * Copyright (C) 2007,2008 Øyvind Harboe * - * oyvind.harboe@zylin.com * - * * - * Copyright (C) 2008 by Spencer Oliver * - * spen@spen-soft.co.uk * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License as published by * - * the Free Software Foundation; either version 2 of the License, or * - * (at your option) any later version. * - * * - * This program is distributed in the hope that it will be useful, * - * but WITHOUT ANY WARRANTY; without even the implied warranty of * - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * - * GNU General Public License for more details. * - * * - * You should have received a copy of the GNU General Public License * - * along with this program; if not, write to the * - * Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - ***************************************************************************/ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "time_support.h" - -#include - -int64_t timeval_ms() -{ - /* Faster/less noisy implementation of getting ms when - * profiling - */ - static const int ms_per_tick = - (CYGNUM_HAL_RTC_NUMERATOR / CYGNUM_HAL_RTC_DENOMINATOR) / 1000000; - cyg_tick_count_t cur_time = cyg_current_time(); - return ((int)cur_time) * ms_per_tick; -} diff --git a/src/jtag/zy1000/jtag_minidriver.h b/src/jtag/zy1000/jtag_minidriver.h index 15d92183..ac6da536 100644 --- a/src/jtag/zy1000/jtag_minidriver.h +++ b/src/jtag/zy1000/jtag_minidriver.h @@ -23,17 +23,10 @@ #if BUILD_ZY1000_MASTER -#if BUILD_ECOSBOARD -#include /* low level i/o */ -#include /* low level i/o */ -#define ZY1000_PEEK(a, b) HAL_READ_UINT32(a, b) -#define ZY1000_POKE(a, b) HAL_WRITE_UINT32(a, b) -#else #define ZY1000_PEEK(a, b) do {b = *((volatile uint32_t *)(a)); } while (0) #define ZY1000_POKE(a, b) do {*((volatile uint32_t *)(a)) = b; } while (0) extern volatile void *zy1000_jtag_master; #define ZY1000_JTAG_BASE ((unsigned long)zy1000_jtag_master) -#endif #else diff --git a/src/jtag/zy1000/zy1000.c b/src/jtag/zy1000/zy1000.c index e61a6183..027049d8 100644 --- a/src/jtag/zy1000/zy1000.c +++ b/src/jtag/zy1000/zy1000.c @@ -55,30 +55,8 @@ #include -#if BUILD_ECOSBOARD -#include "zy1000_version.h" - -#include /* low level i/o */ -#include - -#ifdef CYGPKG_HAL_NIOS2 -#include -#include -#define ZYLIN_KHZ 60000 -#else -#define ZYLIN_KHZ 64000 -#endif - -#define ZYLIN_VERSION GIT_ZY1000_VERSION -#define ZYLIN_DATE __DATE__ -#define ZYLIN_TIME __TIME__ -#define ZYLIN_OPENOCD GIT_OPENOCD_VERSION -#define ZYLIN_OPENOCD_VERSION "ZY1000 " ZYLIN_VERSION " " ZYLIN_DATE - -#else /* Assume we're connecting to a revc w/60MHz clock. */ #define ZYLIN_KHZ 60000 -#endif /* The software needs to check if it's in RCLK mode or not */ static bool zy1000_rclk; @@ -312,111 +290,6 @@ static int jim_zy1000_server(Jim_Interp *interp, int argc, Jim_Obj * const *argv } #endif -#if BUILD_ECOSBOARD -/* Give TELNET a way to find out what version this is */ -static int jim_zy1000_version(Jim_Interp *interp, int argc, Jim_Obj * const *argv) -{ - if ((argc < 1) || (argc > 3)) - return JIM_ERR; - const char *version_str = NULL; - - if (argc == 1) - version_str = ZYLIN_OPENOCD_VERSION; - else { - const char *str = Jim_GetString(argv[1], NULL); - const char *str2 = NULL; - if (argc > 2) - str2 = Jim_GetString(argv[2], NULL); - if (strcmp("openocd", str) == 0) - version_str = ZYLIN_OPENOCD; - else if (strcmp("zy1000", str) == 0) - version_str = ZYLIN_VERSION; - else if (strcmp("date", str) == 0) - version_str = ZYLIN_DATE; - else if (strcmp("time", str) == 0) - version_str = ZYLIN_TIME; - else if (strcmp("pcb", str) == 0) { -#ifdef CYGPKG_HAL_NIOS2 - version_str = "c"; -#else - version_str = "b"; -#endif - } -#ifdef CYGPKG_HAL_NIOS2 - else if (strcmp("fpga", str) == 0) { - - /* return a list of 32 bit integers to describe the expected - * and actual FPGA - */ - static char *fpga_id = "0x12345678 0x12345678 0x12345678 0x12345678"; - uint32_t id, timestamp; - HAL_READ_UINT32(SYSID_BASE, id); - HAL_READ_UINT32(SYSID_BASE+4, timestamp); - sprintf(fpga_id, - "0x%08x 0x%08x 0x%08x 0x%08x", - id, - timestamp, - SYSID_ID, - SYSID_TIMESTAMP); - version_str = fpga_id; - if ((argc > 2) && (strcmp("time", str2) == 0)) { - time_t last_mod = timestamp; - char *t = ctime(&last_mod); - t[strlen(t)-1] = 0; - version_str = t; - } - } -#endif - - else - return JIM_ERR; - } - - Jim_SetResult(interp, Jim_NewStringObj(interp, version_str, -1)); - - return JIM_OK; -} -#endif - -#ifdef CYGPKG_HAL_NIOS2 - - -struct info_forward { - void *data; - struct cyg_upgrade_info *upgraded_file; -}; - -static void report_info(void *data, const char *format, va_list args) -{ - char *s = alloc_vprintf(format, args); - LOG_USER_N("%s", s); - free(s); -} - -struct cyg_upgrade_info firmware_info = { - (uint8_t *)0x84000000, - "/ram/firmware.phi", - "Firmware", - 0x0300000, - 0x1f00000 - - 0x0300000, - "ZylinNiosFirmware\n", - report_info, -}; - -/* File written to /ram/firmware.phi before arriving at this fn */ -static int jim_zy1000_writefirmware(Jim_Interp *interp, int argc, Jim_Obj * const *argv) -{ - if (argc != 1) - return JIM_ERR; - - if (!cyg_firmware_upgrade(NULL, firmware_info)) - return JIM_ERR; - - return JIM_OK; -} -#endif - static int zylinjtag_Jim_Command_powerstatus(Jim_Interp *interp, int argc, Jim_Obj * const *argv) @@ -918,17 +791,7 @@ static const struct command_registration zy1000_commands[] = { "With no arguments, prints status.", .usage = "('on'|'off)", }, -#if BUILD_ZY1000_MASTER -#if BUILD_ECOSBOARD - { - .name = "zy1000_version", - .mode = COMMAND_ANY, - .jim_handler = jim_zy1000_version, - .help = "Print version info for zy1000.", - .usage = "['openocd'|'zy1000'|'date'|'time'|'pcb'|'fpga']", - }, -#endif -#else +#if !BUILD_ZY1000_MASTER { .name = "zy1000_server", .mode = COMMAND_ANY, @@ -943,15 +806,6 @@ static const struct command_registration zy1000_commands[] = { .jim_handler = zylinjtag_Jim_Command_powerstatus, .help = "Returns power status of target", }, -#ifdef CYGPKG_HAL_NIOS2 - { - .name = "updatezy1000firmware", - .mode = COMMAND_ANY, - .jim_handler = jim_zy1000_writefirmware, - .help = "writes firmware to flash", - /* .usage = "some_string", */ - }, -#endif COMMAND_REGISTRATION_DONE }; @@ -1269,12 +1123,6 @@ static void writeShiftValue(uint8_t *data, int bits) #if BUILD_ZY1000_MASTER -#if BUILD_ECOSBOARD -static char watchdog_stack[2048]; -static cyg_thread watchdog_thread_object; -static cyg_handle_t watchdog_thread_handle; -#endif - #ifdef WATCHDOG_BASE /* If we connect to port 8888 we must send a char every 10s or the board resets itself */ static void watchdog_server(cyg_addrword_t data) @@ -1359,16 +1207,14 @@ int interface_jtag_add_sleep(uint32_t us) } #endif -#if BUILD_ZY1000_MASTER && !BUILD_ECOSBOARD +#if BUILD_ZY1000_MASTER volatile void *zy1000_jtag_master; #include #endif int zy1000_init(void) { -#if BUILD_ECOSBOARD - LOG_USER("%s", ZYLIN_OPENOCD_VERSION); -#elif BUILD_ZY1000_MASTER +#if BUILD_ZY1000_MASTER int fd = open("/dev/mem", O_RDWR | O_SYNC); if (fd == -1) { LOG_ERROR("No access to /dev/mem"); @@ -1400,17 +1246,6 @@ int zy1000_init(void) /* deassert resets. Important to avoid infinite loop waiting for SRST to deassert */ zy1000_reset(0, 0); -#if BUILD_ZY1000_MASTER -#if BUILD_ECOSBOARD -#ifdef WATCHDOG_BASE - cyg_thread_create(1, watchdog_server, (cyg_addrword_t) 0, "watchdog tcip/ip server", - (void *) watchdog_stack, sizeof(watchdog_stack), - &watchdog_thread_handle, &watchdog_thread_object); - cyg_thread_resume(watchdog_thread_handle); -#endif -#endif -#endif - return ERROR_OK; } diff --git a/src/server/Makefile.am b/src/server/Makefile.am index a7c318ce..04d3035f 100644 --- a/src/server/Makefile.am +++ b/src/server/Makefile.am @@ -5,9 +5,7 @@ noinst_LTLIBRARIES = libserver.la noinst_HEADERS = server.h telnet_server.h gdb_server.h libserver_la_SOURCES = server.c telnet_server.c gdb_server.c -if !ECOSBOARD libserver_la_SOURCES += server_stubs.c -endif libserver_la_CFLAGS = if IS_MINGW diff --git a/src/server/server.h b/src/server/server.h index b6ff5ed9..bbcfdc0f 100644 --- a/src/server/server.h +++ b/src/server/server.h @@ -87,11 +87,11 @@ int connection_write(struct connection *connection, const void *data, int len); int connection_read(struct connection *connection, void *data, int len); /** - * Used by server_loop(), defined in server_stubs.c or ecosboard.c + * Used by server_loop(), defined in server_stubs.c */ void openocd_sleep_prelude(void); /** - * Used by server_loop(), defined in server_stubs.c or ecosboard.c + * Used by server_loop(), defined in server_stubs.c */ void openocd_sleep_postlude(void);