From: Fabio Estevam Date: Fri, 11 Apr 2014 20:43:53 +0000 (-0300) Subject: nitrogen6x: Fix the PAD settings for the ECSPI chipselect X-Git-Tag: v2014.07-rc2~9^2~3^2~15 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=3b31605aef069d183a9d0c1e3aa6f957503cd56b;p=u-boot nitrogen6x: Fix the PAD settings for the ECSPI chipselect ECSPI chipselect (MX6_PAD_EIM_D19__GPIO3_IO19) is used with GPIO functionality, so it does not make sense to set its pad as SPI pin. Signed-off-by: Fabio Estevam Tested-by: Eric Nelson Acked-by: Eric Nelson --- diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index 8475653e51..84294db859 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -330,7 +330,7 @@ int board_mmc_init(bd_t *bis) #ifdef CONFIG_MXC_SPI iomux_v3_cfg_t const ecspi1_pads[] = { /* SS1 */ - MX6_PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL), MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL), MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL), MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),