From: Stefan Roese Date: Tue, 14 Aug 2007 14:36:29 +0000 (+0200) Subject: Merge with git://www.denx.de/git/u-boot.git X-Git-Tag: v1.3.0-rc1~19^2~17^2 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=3b3bff4cbf2cb14f9a3e7d03f26ebab900efe4ae;p=u-boot Merge with git://www.denx.de/git/u-boot.git --- 3b3bff4cbf2cb14f9a3e7d03f26ebab900efe4ae diff --cc MAKEALL index 8d1830f05c,7fb10b3648..1219fb373f --- a/MAKEALL +++ b/MAKEALL @@@ -74,25 -150,73 +150,77 @@@ LIST_8xx=" ## PPC4xx Systems ######################################################################### - LIST_4xx=" \ - acadia acadia_nand ADCIOP alpr \ - AP1000 AR405 ASH405 bamboo \ - bamboo_nand bubinga CANBT CMS700 \ - CPCI2DP CPCI405 CPCI4052 CPCI405AB \ - CPCI405DT CPCI440 CPCIISER4 CRAYL1 \ - csb272 csb472 DASA_SIM DP405 \ - DU405 ebony ERIC EXBITGEN \ - G2000 HH405 hcu4 hcu5 \ - HUB405 JSE KAREF katmai \ - luan lwmon5 METROBOX MIP405 \ - MIP405T ML2 ml300 ocotea \ - OCRTC ORSG p3p440 PCI405 \ - pcs440ep PIP405 PLU405 PMC405 \ - PPChameleonEVB sbc405 sc3 sequoia \ - sequoia_nand taihu taishan VOH405 \ - VOM405 W7OLMC W7OLMG walnut \ - WUH405 XPEDITE1K yellowstone yosemite \ - yucca zeus \ + LIST_4xx=" \ + acadia \ + acadia_nand \ + ADCIOP \ + alpr \ + AP1000 \ + AR405 \ + ASH405 \ + bamboo \ + bamboo_nand \ + bubinga \ + CANBT \ + CMS700 \ + CPCI2DP \ + CPCI405 \ + CPCI4052 \ + CPCI405AB \ + CPCI405DT \ + CPCI440 \ + CPCIISER4 \ + CRAYL1 \ + csb272 \ + csb472 \ + DASA_SIM \ + DP405 \ + DU405 \ + ebony \ + ERIC \ + EXBITGEN \ + G2000 \ ++ hcu4 \ ++ hcu5 \ + HH405 \ + HUB405 \ + JSE \ + KAREF \ + katmai \ + luan \ + lwmon5 \ + METROBOX \ + MIP405 \ + MIP405T \ + ML2 \ + ml300 \ + ocotea \ + OCRTC \ + ORSG \ + p3p440 \ + PCI405 \ + pcs440ep \ + PIP405 \ + PLU405 \ + PMC405 \ + PPChameleonEVB \ + sbc405 \ + sc3 \ + sequoia \ + sequoia_nand \ ++ taihu \ + taishan \ + VOH405 \ + VOM405 \ + W7OLMC \ + W7OLMG \ + walnut \ + WUH405 \ + XPEDITE1K \ + yellowstone \ + yosemite \ + yucca \ ++ zeus \ " ######################################################################### diff --cc board/netstal/common/nm_bsp.c index 1e06780c0e,0000000000..a9de45ea70 mode 100644,000000..100644 --- a/board/netstal/common/nm_bsp.c +++ b/board/netstal/common/nm_bsp.c @@@ -1,41 -1,0 +1,41 @@@ +/* + *(C) Copyright 2005-2007 Netstal Maschinen AG + * Niklaus Giger (Niklaus.Giger@netstal.com) + * + * This source code is free software; you can redistribute it + * and/or modify it in source code form under the terms of the GNU + * General Public License as published by the Free Software + * Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA + */ + +#include +#include + - #if (CONFIG_COMMANDS & CFG_CMD_BSP) ++#ifdef CONFIG_CMD_BSP +/* + * Command nm_bsp: Netstal Maschinen BSP specific command + */ +int nm_bsp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + printf("%s: flag %d, argc %d, argv[0] %s\n", __FUNCTION__, + flag, argc, argv[0]); + printf("Netstal Maschinen BSP specific command. None at the moment.\n"); + return 0; +} + +U_BOOT_CMD( + nm_bsp, 1, 1, nm_bsp, + "nm_bsp - Netstal Maschinen BSP specific command. \n", + "Help for Netstal Maschinen BSP specific command.\n" + ); +#endif diff --cc board/netstal/hcu4/hcu4.c index 252aaa76b2,0000000000..2b9560484d mode 100644,000000..100644 --- a/board/netstal/hcu4/hcu4.c +++ b/board/netstal/hcu4/hcu4.c @@@ -1,403 -1,0 +1,400 @@@ +/* + *(C) Copyright 2005-2007 Netstal Maschinen AG + * Niklaus Giger (Niklaus.Giger@netstal.com) + * + * This source code is free software; you can redistribute it + * and/or modify it in source code form under the terms of the GNU + * General Public License as published by the Free Software + * Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA + */ + +#include +#include +#include +#include +#include +#include "../common/nm_bsp.c" + +DECLARE_GLOBAL_DATA_PTR; + +#define HCU_MACH_VERSIONS_REGISTER (0x7C000000 + 0xF00000) + - #define mtsdram(reg, data) { mtdcr(memcfga,reg);mtdcr(memcfgd,data); } - #define mfsdram(value, reg) { mtdcr(memcfga,reg); value = mfdcr(memcfgd); } - +#define SDRAM_LEN 32*1024*1024 /* 32 MB -RAM */ + +#define DO_UGLY_SDRAM_WORKAROUND + +enum { + /* HW_GENERATION_HCU wird nicht mehr unterstuetzt */ + HW_GENERATION_HCU2 = 0x10, + HW_GENERATION_HCU3 = 0x10, + HW_GENERATION_HCU4 = 0x20, + HW_GENERATION_MCU = 0x08, + HW_GENERATION_MCU20 = 0x0a, + HW_GENERATION_MCU25 = 0x09, +}; + +void sysLedSet(u32 value); +long int spd_sdram(int(read_spd)(uint addr)); + +#ifdef CONFIG_SPD_EEPROM +#define DEBUG +#endif + +#if defined(DEBUG) +void show_sdram_registers(void); +#endif + +/* + * This function is run very early, out of flash, and before devices are + * initialized. It is called by lib_ppc/board.c:board_init_f by virtue + * of being in the init_sequence array. + * + * The SDRAM has been initialized already -- start.S:start called + * init.S:init_sdram early on -- but it is not yet being used for + * anything, not even stack. So be careful. + */ + +#define CPC0_CR0 0xb1 /* Chip control register 0 */ +#define CPC0_CR1 0xb2 /* Chip control register 1 */ +/* Attention: If you want 1 microsecs times from the external oscillator + * use 0x00804051. But this causes problems with u-boot and linux! + */ +#define CPC0_CR1_VALUE 0x00004051 +#define CPC0_ECR 0xaa /* Edge condition register */ +#define EBC0_CFG 0x23 /* External Peripheral Control Register */ +#define CPC0_EIRR 0xb6 /* External Interrupt Register */ + + +int board_early_init_f (void) +{ + /*-------------------------------------------------------------------+ + | Interrupt controller setup for the HCU4 board. + | Note: IRQ 0-15 405GP internally generated; high; level sensitive + | IRQ 16 405GP internally generated; low; level sensitive + | IRQ 17-24 RESERVED/UNUSED + | IRQ 31 (EXT IRQ 6) (unused) + +-------------------------------------------------------------------*/ + mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr (uicer, 0x00000000); /* disable all ints */ + mtdcr (uiccr, 0x00000000); /* set all to be non-critical */ + mtdcr (uicpr, 0xFFFFFF87); /* set int polarities */ + mtdcr (uictr, 0x10000000); /* set int trigger levels */ + mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + + mtdcr(CPC0_CR1, CPC0_CR1_VALUE); + mtdcr(CPC0_ECR, 0x60606000); + mtdcr(CPC0_EIRR, 0x7c000000); + + return 0; +} + +#ifdef CONFIG_BOARD_PRE_INIT +int board_pre_init (void) +{ + return board_early_init_f (); +} +#endif + +int checkboard (void) +{ + unsigned int j; + u16 *boardVersReg = (u16 *) HCU_MACH_VERSIONS_REGISTER; + u16 generation = *boardVersReg & 0xf0; + u16 index = *boardVersReg & 0x0f; + + /* Force /RTS to active. The board it not wired quite + correctly to use cts/rtc flow control, so just force the + /RST active and forget about it. */ + writeb (readb (0xef600404) | 0x03, 0xef600404); + printf ("\nNetstal Maschinen AG "); + if (generation == HW_GENERATION_HCU3) + printf ("HCU3: index %d\n\n", index); + else if (generation == HW_GENERATION_HCU4) + printf ("HCU4: index %d\n\n", index); + /* GPIO here noch nicht richtig initialisert !!! */ + sysLedSet(0); + for (j = 0; j < 7; j++) { + sysLedSet(1 << j); + udelay(50 * 1000); + } + + return 0; +} + +u32 sysLedGet(void) +{ + return (~((*(u32 *)GPIO0_OR)) >> 23) & 0xff; +} + +void sysLedSet(u32 value /* value to place in LEDs */) +{ + u32 tmp = ~value; + u32 *ledReg; + + tmp = (tmp << 23) | 0x7FFFFF; + ledReg = (u32 *)GPIO0_OR; + *ledReg = tmp; +} + +/* + * sdram_init - Dummy implementation for start.S, spd_sdram or initdram + * used for HCUx + */ +void sdram_init(void) +{ + return; +} + +#if defined(DEBUG) +void show_sdram_registers(void) +{ + u32 value; + + printf ("SDRAM Controller Registers --\n"); - mfsdram(value, mem_mcopt1); ++ mfsdram(mem_mcopt1, value); + printf (" SDRAM0_CFG : 0x%08x\n", value); - mfsdram(value, mem_status); ++ mfsdram(mem_status, value); + printf (" SDRAM0_STATUS: 0x%08x\n", value); - mfsdram(value, mem_mb0cf); ++ mfsdram(mem_mb0cf, value); + printf (" SDRAM0_B0CR : 0x%08x\n", value); - mfsdram(value, mem_mb1cf); ++ mfsdram(mem_mb1cf, value); + printf (" SDRAM0_B1CR : 0x%08x\n", value); - mfsdram(value, mem_sdtr1); ++ mfsdram(mem_sdtr1, value); + printf (" SDRAM0_TR : 0x%08x\n", value); - mfsdram(value, mem_rtr); ++ mfsdram(mem_rtr, value); + printf (" SDRAM0_RTR : 0x%08x\n", value); +} +#endif + +/* + * this is even after checkboard. It returns the size of the SDRAM + * that we have installed. This function is called by board_init_f + * in lib_ppc/board.c to initialize the memory and return what I + * found. These are default value, which will be overridden later. + */ + +long int fixed_hcu4_sdram (int board_type) +{ +#ifdef DEBUG + printf (__FUNCTION__); +#endif + /* disable memory controller */ + mtdcr (memcfga, mem_mcopt1); + mtdcr (memcfgd, 0x00000000); + + udelay (500); + + /* Clear SDRAM0_BESR0 (Bus Error Syndrome Register) */ + mtdcr (memcfga, mem_besra); + mtdcr (memcfgd, 0xffffffff); + + /* Clear SDRAM0_BESR1 (Bus Error Syndrome Register) */ + mtdcr (memcfga, mem_besrb); + mtdcr (memcfgd, 0xffffffff); + + /* Clear SDRAM0_ECCCFG (disable ECC) */ + mtdcr (memcfga, mem_ecccf); + mtdcr (memcfgd, 0x00000000); + + /* Clear SDRAM0_ECCESR (ECC Error Syndrome Register) */ + mtdcr (memcfga, mem_eccerr); + mtdcr (memcfgd, 0xffffffff); + + /* Timing register: CASL=2, PTA=2, CTP=2, LDF=1, RFTA=5, RCD=2 + * TODO ngngng + */ + mtdcr (memcfga, mem_sdtr1); + mtdcr (memcfgd, 0x008a4015); + + /* Memory Bank 0 Config == BA=0x00000000, SZ=64M, AM=3, BE=1 + * TODO ngngng + */ + mtdcr (memcfga, mem_mb0cf); + mtdcr (memcfgd, 0x00062001); + + /* refresh timer = 0x400 */ + mtdcr (memcfga, mem_rtr); + mtdcr (memcfgd, 0x04000000); + + /* Power management idle timer set to the default. */ + mtdcr (memcfga, mem_pmit); + mtdcr (memcfgd, 0x07c00000); + + udelay (500); + + /* Enable banks (DCE=1, BPRF=1, ECCDD=1, EMDUL=1) TODO */ + mtdcr (memcfga, mem_mcopt1); + mtdcr (memcfgd, 0x90800000); + +#ifdef DEBUG + printf ("%s: done\n", __FUNCTION__); +#endif + return SDRAM_LEN; +} + +/*---------------------------------------------------------------------------+ + * getSerialNr + *---------------------------------------------------------------------------*/ +static u32 getSerialNr(void) +{ + u32 *serial = (u32 *)CFG_FLASH_BASE; + + if (*serial == 0xffffffff) + return get_ticks(); + + return *serial; +} + + +/*---------------------------------------------------------------------------+ + * misc_init_r. + *---------------------------------------------------------------------------*/ + +int misc_init_r(void) +{ + char *s = getenv("ethaddr"); + char *e; + int i; + u32 serial = getSerialNr(); + + for (i = 0; i < 6; ++i) { + gd->bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0; + if (s) + s = (*e) ? e + 1 : e; + } + + if (gd->bd->bi_enetaddr[3] == 0 && + gd->bd->bi_enetaddr[4] == 0 && + gd->bd->bi_enetaddr[5] == 0) { + char ethaddr[22]; + /* [0..3] Must be in sync with CONFIG_ETHADDR */ + gd->bd->bi_enetaddr[0] = 0x00; + gd->bd->bi_enetaddr[1] = 0x60; + gd->bd->bi_enetaddr[2] = 0x13; + gd->bd->bi_enetaddr[3] = (serial >> 16) & 0xff; + gd->bd->bi_enetaddr[4] = (serial >> 8) & 0xff; + gd->bd->bi_enetaddr[5] = (serial >> 0) & 0xff; + sprintf (ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X\0", + gd->bd->bi_enetaddr[0], gd->bd->bi_enetaddr[1], + gd->bd->bi_enetaddr[2], gd->bd->bi_enetaddr[3], + gd->bd->bi_enetaddr[4], gd->bd->bi_enetaddr[5]) ; + printf("%s: Setting eth %s serial 0x%x\n", __FUNCTION__, + ethaddr, serial); + setenv ("ethaddr", ethaddr); + } + return 0; +} + +#ifdef DO_UGLY_SDRAM_WORKAROUND +#include "i2c.h" + +void set_spd_default_value(unsigned int spd_addr,uchar def_val) +{ + uchar value; + int res = i2c_read(SPD_EEPROM_ADDRESS, spd_addr, 1, &value, 1) ; + + if (res == 0 && value == 0xff) { + res = i2c_write(SPD_EEPROM_ADDRESS, + spd_addr, 1, &def_val, 1) ; +#ifdef DEBUG + printf("%s: Setting spd offset %3d to %3d res %d\n", + __FUNCTION__, spd_addr, def_val, res); +#endif + } +} +#endif + +long int initdram(int board_type) +{ + long dram_size = 0; + +#if !defined(CONFIG_SPD_EEPROM) + dram_size = fixed_hcu4_sdram(); +#else +#ifdef DO_UGLY_SDRAM_WORKAROUND + /* Workaround if you have no working I2C-EEPROM-SPD-configuration */ + i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE); + set_spd_default_value(2, 4); /* SDRAM Type */ + set_spd_default_value(7, 0); /* module width, high byte */ + set_spd_default_value(12, 1); /* Refresh or 0x81 */ + + /* Only correct for HCU3 with 32 MB RAM*/ + /* Number of bytes used by module manufacturer */ + set_spd_default_value( 0, 128); + set_spd_default_value( 1, 11 ); /* Total SPD memory size */ + set_spd_default_value( 2, 4 ); /* Memory type */ + set_spd_default_value( 3, 12 ); /* Number of row address bits */ + set_spd_default_value( 4, 9 ); /* Number of column address bits */ + set_spd_default_value( 5, 1 ); /* Number of module rows */ + set_spd_default_value( 6, 32 ); /* Module data width, LSB */ + set_spd_default_value( 7, 0 ); /* Module data width, MSB */ + set_spd_default_value( 8, 1 ); /* Module interface signal levels */ + /* SDRAM cycle time for highest CL (Tclk) */ + set_spd_default_value( 9, 112); + /* SDRAM access time from clock for highest CL (Tac) */ + set_spd_default_value(10, 84 ); + set_spd_default_value(11, 2 ); /* Module configuration type */ + set_spd_default_value(12, 128); /* Refresh rate/type */ + set_spd_default_value(13, 16 ); /* Primary SDRAM width */ + set_spd_default_value(14, 8 ); /* Error Checking SDRAM width */ + /* SDRAM device attributes, min clock delay for back to back */ + /*random column addresses (Tccd) */ + set_spd_default_value(15, 1 ); + /* SDRAM device attributes, burst lengths supported */ + set_spd_default_value(16, 143); + /* SDRAM device attributes, number of banks on SDRAM device */ + set_spd_default_value(17, 4 ); + /* SDRAM device attributes, CAS latency */ + set_spd_default_value(18, 6 ); + /* SDRAM device attributes, CS latency */ + set_spd_default_value(19, 1 ); + /* SDRAM device attributes, WE latency */ + set_spd_default_value(20, 1 ); + set_spd_default_value(21, 0 ); /* SDRAM module attributes */ + /* SDRAM device attributes, general */ + set_spd_default_value(22, 14 ); + /* SDRAM cycle time for 2nd highest CL (Tclk) */ + set_spd_default_value(23, 117); + /* SDRAM access time from clock for2nd highest CL (Tac) */ + set_spd_default_value(24, 84 ); + /* SDRAM cycle time for 3rd highest CL (Tclk) */ + set_spd_default_value(25, 0 ); + /* SDRAM access time from clock for3rd highest CL (Tac) */ + set_spd_default_value(26, 0 ); + set_spd_default_value(27, 15 ); /* Minimum row precharge time (Trp) */ + /* Minimum row active to row active delay (Trrd) */ + set_spd_default_value(28, 14 ); + set_spd_default_value(29, 15 ); /* Minimum CAS to RAS delay (Trcd) */ + set_spd_default_value(30, 37 ); /* Minimum RAS pulse width (Tras) */ + set_spd_default_value(31, 8 ); /* Module bank density */ + /* Command and Address signal input setup time */ + set_spd_default_value(32, 21 ); + /* Command and Address signal input hold time */ + set_spd_default_value(33, 8 ); + set_spd_default_value(34, 21 ); /* Data signal input setup time */ + set_spd_default_value(35, 8 ); /* Data signal input hold time */ +#endif /* DO_UGLY_SDRAM_WORKAROUND */ + dram_size = spd_sdram(0); +#endif + +#ifdef DEBUG + show_sdram_registers(); +#endif + +#if defined(CFG_DRAM_TEST) + bcu4_testdram(dram_size); + printf("%s %d MB of SDRAM\n", __FUNCTION__, dram_size/(1024*1024)); +#endif + + return dram_size; +} diff --cc cpu/ppc4xx/traps.c index de5fde9e29,899cdbd1f4..f5365cb76a mode 100755,100644..100644 --- a/cpu/ppc4xx/traps.c +++ b/cpu/ppc4xx/traps.c diff --cc cpu/ppc4xx/usb.c index 0000000000,2837b37c58..272ed8c15e mode 000000,100644..100644 --- a/cpu/ppc4xx/usb.c +++ b/cpu/ppc4xx/usb.c @@@ -1,0 -1,50 +1,50 @@@ + /* + * (C) Copyright 2007 + * Markus Klotzbuecher, DENX Software Engineering + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + #include + + #if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT) + + #include "usbdev.h" + -int usb_cpu_init() ++int usb_cpu_init(void) + { + + #if defined(CONFIG_440EP) || defined(CONFIG_440EPX) + usb_dev_init(); + #endif + + return 0; + } + -int usb_cpu_stop() ++int usb_cpu_stop(void) + { + return 0; + } + -int usb_cpu_init_fail() ++int usb_cpu_init_fail(void) + { + return 0; + } + + #endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */ diff --cc include/configs/hcu4.h index 9e45e903d2,0000000000..577f459e29 mode 100644,000000..100644 --- a/include/configs/hcu4.h +++ b/include/configs/hcu4.h @@@ -1,341 -1,0 +1,348 @@@ +/* + *(C) Copyright 2005-2007 Netstal Maschinen AG + * Niklaus Giger (Niklaus.Giger@netstal.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************ + * hcu4.h - configuration for HCU4 board (similar to hcu5.h) + ***********************************************************************/ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +#define CONFIG_HCU4 1 /* Board is HCU4 */ +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_405GPr 1 /* HCU4 has a 405GPr */ +#define CONFIG_405GP 1 +#define CONFIG_4xx 1 + +#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ + +/*----------------------------------------------------------------------- + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) +*----------------------------------------------------------------------*/ +#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */ +#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */ + + +#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ +#define CFG_FLASH_BASE 0xfff80000 /* start of FLASH */ +#define CFG_MONITOR_BASE TEXT_BASE + +/* ... with on-chip memory here (4KBytes) */ +#define CFG_OCM_DATA_ADDR 0xF4000000 +#define CFG_OCM_DATA_SIZE 0x00001000 +/* Do not set up locked dcache as init ram. */ +#undef CFG_INIT_DCACHE_CS + +/* Use the On-Chip-Memory (OCM) as a temporary stack for the startup code. */ +#define CFG_TEMP_STACK_OCM 1 + +#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* OCM */ +#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE +#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +/* + * If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1. + * If CFG_405_UART_ERRATA_59, then UART divisor is 31. + * Otherwise, UART divisor is determined by CPU Clock and CFG_BASE_BAUD value. + * The Linux BASE_BAUD define should match this configuration. + * baseBaud = cpuClock/(uartDivisor*16) + * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock, + * set Linux BASE_BAUD to 403200. + */ +#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */ +#undef CONFIG_SERIAL_MULTI /* needed to be able to define + CONFIG_SERIAL_SOFTWARE_FIFO */ +#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ +#define CFG_BASE_BAUD 691200 + +/* Size (bytes) of interrupt driven serial port buffer. + * Set to 0 to use polling instead of interrupts. + * Setting to 0 will also disable RTS/CTS handshaking. + */ +#undef CONFIG_SERIAL_SOFTWARE_FIFO + +/* Set console baudrate to 9600 */ +#define CONFIG_BAUDRATE 9600 + + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +/*----------------------------------------------------------------------- + * Environment + *----------------------------------------------------------------------*/ + +#undef CFG_ENV_IS_IN_NVRAM +#undef CFG_ENV_IS_IN_FLASH +#define CFG_ENV_IS_IN_EEPROM +#undef CFG_ENV_IS_NOWHERE + +#ifdef CFG_ENV_IS_IN_EEPROM +/* Put the environment after the SDRAM configuration */ +#define PROM_SIZE 2048 +#define CFG_ENV_OFFSET 512 +#define CFG_ENV_SIZE (PROM_SIZE-CFG_ENV_OFFSET) +#endif + +#ifdef CFG_ENV_IS_IN_FLASH +/* Put the environment in Flash */ +#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#endif + +/*----------------------------------------------------------------------- + * I2C stuff for a ATMEL AT24C16 (2kB holding ENV, we are using the + * the first internal I2C controller of the PPC440EPx + *----------------------------------------------------------------------*/ +#define CFG_SPD_BUS_NUM 0 + +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +/* This is the 7bit address of the device, not including P. */ +#define CFG_I2C_EEPROM_ADDR 0x50 +#define CFG_I2C_EEPROM_ADDR_LEN 1 + +/* The EEPROM can do 16byte ( 1 << 4 ) page writes. */ +#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07 +#define CFG_EEPROM_PAGE_WRITE_BITS 4 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 +#define CFG_EEPROM_PAGE_WRITE_ENABLE +#undef CFG_I2C_MULTI_EEPROMS + + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +/* Setup some board specific values for the default environment variables */ +#define CONFIG_HOSTNAME hcu4 +#define CONFIG_IPADDR 172.25.1.42 +#define CONFIG_ETHADDR 00:60:13:00:00:00 /* Netstal Machines AG MAC */ +#define CONFIG_OVERWRITE_ETHADDR_ONCE +#define CONFIG_SERVERIP 172.25.1.3 + +#define CFG_TFTP_LOADADDR 0x01000000 /* @16 MB */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "loadaddr=0x01000000\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "rootpath=/home/diagnose/eldk/ppc_4xx\0" \ + "bootfile=/tftpboot/hcu4/uImage\0" \ + "load=tftp 100000 hcu4/u-boot.bin\0" \ + "update=protect off FFFa0000 FFFFFFFF;era FFFa0000 FFFFFFFF;" \ + "cp.b 100000 FFFa0000 60000\0" \ + "upd=run load;run update\0" \ + "vx=tftp ${loadaddr} hcu4_vx_rom;" \ + "setenv bootargs emac(0,0)hcu4_vx_rom e=${ipaddr} " \ + " h=${serverip} u=dpu pw=netstal8752 tn=hcu4 f=0x3008;" \ + "bootvx ${loadaddr}\0" \ + "" +#define CONFIG_BOOTCOMMAND "run vx" + +#if 0 +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#else +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 1 /* PHY address */ + +#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ + +#define CONFIG_HAS_ETH0 +#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */ - #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_BSP | \ - CFG_CMD_CACHE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_FLASH | \ - CFG_CMD_I2C | \ - CFG_CMD_IMMAP | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM \ - ) - - /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ - #include ++ ++/* ++ * BOOTP options ++ */ ++#define CONFIG_BOOTP_BOOTFILESIZE ++#define CONFIG_BOOTP_BOOTPATH ++#define CONFIG_BOOTP_GATEWAY ++#define CONFIG_BOOTP_HOSTNAME ++ ++/* ++ * Command line configuration. ++ */ ++#include ++ ++#define CONFIG_CMD_ASKENV ++#define CONFIG_CMD_BSP ++#define CONFIG_CMD_CACHE ++#define CONFIG_CMD_DHCP ++#define CONFIG_CMD_DIAG ++#define CONFIG_CMD_EEPROM ++#define CONFIG_CMD_ELF ++#define CONFIG_CMD_FLASH ++#define CONFIG_CMD_I2C ++#define CONFIG_CMD_IMMAP ++#define CONFIG_CMD_IRQ ++#define CONFIG_CMD_MII ++#define CONFIG_CMD_NET ++#define CONFIG_CMD_PING ++#define CONFIG_CMD_REGINFO ++#define CONFIG_CMD_SDRAM + +/* SPD EEPROM (sdram speed config) disabled */ +#define CONFIG_SPD_EEPROM 1 +#define SPD_EEPROM_ADDRESS 0x50 + +/*----------------------------------------------------------------------- + * Miscellaneous configurable options + *----------------------------------------------------------------------*/ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ - #if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#if defined(CONFIG_CMD_KGDB) + #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else + #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +/*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + */ + +/* Memory Bank 0 (Flash Bank 0) initialization */ +#define CFG_EBC_PB0AP 0x02005400 +#define CFG_EBC_PB0CR 0xFFF18000 /* BAS=0xFFF,BS=1MB,BU=R/W,BW=8bit */ + +#define CFG_EBC_PB1AP 0x03041200 +#define CFG_EBC_PB1CR 0x7009A000 /* BAS=,BS=MB,BU=R/W,BW=bit */ + +#define CFG_EBC_PB2AP 0x02054500 +#define CFG_EBC_PB2CR 0x78018000 /* BAS=,BS=MB,BU=R/W,BW=bit */ + +#define CFG_EBC_PB3AP 0x01840300 +#define CFG_EBC_PB3CR 0x7c0ba000 /* BAS=,BS=MB,BU=R/W,BW=bit */ + +#define CFG_EBC_PB4AP 0x01800300 +#define CFG_EBC_PB4CR 0x7e0ba000 /* BAS=,BS=MB,BU=R/W,BW=bit */ + +#define CFG_GPIO0_TCR 0x7ffe0000 /* GPIO value */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ + + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +/* Init Memory Controller: + * + * BR0/1 and OR0/1 (FLASH) + */ + +#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */ +#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */ + + +/* Configuration Port location */ +#define CONFIG_PORT_ADDR 0xF0000500 + + +/*----------------------------------------------------------------------- + * Cache Configuration + *----------------------------------------------------------------------*/ +#define CFG_DCACHE_SIZE 16384 /* For IBM 405GPr CPUs */ +#define CFG_CACHELINE_SIZE 32 /* ... */ - #if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ - #endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_HUSH_PARSER /* use "hush" command parser */ +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + - #if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#if defined(CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif +#endif /* __CONFIG_H */ diff --cc include/configs/hcu5.h index fa6ca37534,0000000000..d0bf2516ed mode 100644,000000..100644 --- a/include/configs/hcu5.h +++ b/include/configs/hcu5.h @@@ -1,388 -1,0 +1,393 @@@ +/* + * (C) Copyright 2007 Netstal Maschinen AG + * Niklaus Giger (Niklaus.Giger@netstal.com) + * + * (C) Copyright 2006-2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * (C) Copyright 2006 + * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com + * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************ + * hcu5.h - configuration for HCU5 board (derived from sequoia.h) + ***********************************************************************/ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +#define CONFIG_HCU5 1 /* Board is HCU5 */ +#define CONFIG_440EPX 1 /* Specific PPC440EPx */ +#define CONFIG_440 1 /* ... PPC440 family */ +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ +#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ + +/*----------------------------------------------------------------------- + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + *----------------------------------------------------------------------*/ +#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */ +#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */ + +#define CFG_BOOT_BASE_ADDR 0xfff00000 +#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ +#define CFG_FLASH_BASE 0xfff80000 /* start of FLASH */ +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_OCM_BASE 0xe0010000 /* ocm */ +#define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */ +#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */ +#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000 +#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000 +#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000 + +/* Don't change either of these */ +#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */ + +#define CFG_USB2D0_BASE 0xe0000100 +#define CFG_USB_DEVICE 0xe0000000 +#define CFG_USB_HOST 0xe0000400 + +/*----------------------------------------------------------------------- + * Initial RAM & stack pointer + *----------------------------------------------------------------------*/ +/* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */ +#define CFG_INIT_RAM_OCM 1 /* OCM as init ram */ +#define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */ + +#define CFG_INIT_RAM_END (4 << 10) +#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */ +#define CONFIG_BAUDRATE 9600 +#undef CONFIG_SERIAL_MULTI /* needed to be able to define + CONFIG_SERIAL_SOFTWARE_FIFO, but + CONFIG_SERIAL_SOFTWARE_FIFO (16) does not work */ +/* Size (bytes) of interrupt driven serial port buffer. + * Set to 0 to use polling instead of interrupts. + * Setting to 0 will also disable RTS/CTS handshaking. + */ +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#undef CONFIG_UART1_CONSOLE + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +/*----------------------------------------------------------------------- + * Environment + *----------------------------------------------------------------------*/ + +#undef CFG_ENV_IS_IN_NVRAM +#undef CFG_ENV_IS_IN_FLASH +#define CFG_ENV_IS_IN_EEPROM +#undef CFG_ENV_IS_NOWHERE + +#ifdef CFG_ENV_IS_IN_EEPROM +/* Put the environment after the SDRAM and bootstrap configuration */ +#define PROM_SIZE 2048 +#define CFG_BOOSTRAP_OPTION_OFFSET 512 +#define CFG_ENV_OFFSET (CFG_BOOSTRAP_OPTION_OFFSET + 0x10) +#define CFG_ENV_SIZE (PROM_SIZE-CFG_ENV_OFFSET) +#endif + +#ifdef CFG_ENV_IS_IN_FLASH +/* Put the environment in Flash */ +#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#endif + +/*----------------------------------------------------------------------- + * DDR SDRAM + *----------------------------------------------------------------------*/ +#define CFG_MBYTES_SDRAM (128) /* 128 MB or 256 MB */ +#define CFG_DDR_CACHED_ADDR 0x40000000 /* setup 2nd TLB cached here */ +#undef CONFIG_DDR_DATA_EYE /* Do not use DDR2 optimization */ +#define CONFIG_DDR_ECC 1 /* enable ECC */ + +/*----------------------------------------------------------------------- + * I2C stuff for a ATMEL AT24C16 (2kB holding ENV, we are using the + * the second internal I2C controller of the PPC440EPx + *----------------------------------------------------------------------*/ +#define CFG_SPD_BUS_NUM 1 + +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +/* This is the 7bit address of the device, not including P. */ +#define CFG_I2C_EEPROM_ADDR 0x50 +#define CFG_I2C_EEPROM_ADDR_LEN 1 + +/* The EEPROM can do 16byte ( 1 << 4 ) page writes. */ +#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07 +#define CFG_EEPROM_PAGE_WRITE_BITS 4 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 +#define CFG_EEPROM_PAGE_WRITE_ENABLE +#undef CFG_I2C_MULTI_EEPROMS + + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run nfs\" to mount Linux root filesystem over NFS;"\ + "echo" + +#undef CONFIG_BOOTARGS + +/* Setup some board specific values for the default environment variables */ +#define CONFIG_HOSTNAME hcu5 +#define CONFIG_IPADDR 172.25.1.42 +#define CONFIG_ETHADDR 00:60:13:00:00:00 /* Netstal Machines AG MAC */ +#define CONFIG_OVERWRITE_ETHADDR_ONCE +#define CONFIG_SERVERIP 172.25.1.3 + +#define CFG_TFTP_LOADADDR 0x01000000 /* @16 MB */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "loadaddr=0x01000000\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "bootfile=hcu5/uImage\0" \ + "rootpath=/home/hcu/eldk/ppc_4xxFP\0" \ + "load=tftp 100000 hcu5/u-boot.bin\0" \ + "update=protect off FFFa0000 FFFFFFFF;era FFFa0000 FFFFFFFF;" \ + "cp.b 100000 FFFa0000 60000\0" \ + "upd=run load;run update\0" \ + "vx=tftp ${loadaddr} hcu5/hcu5_vx_rom;" \ + "setenv bootargs emac(0,0)hcu5_vx_rom e=${ipaddr} " \ + " h=${serverip} u=dpu pw=netstal8752 tn=hcu5 f=0x3008;" \ + "bootvx ${loadaddr}\0" \ + "" +#define CONFIG_BOOTCOMMAND "run vx" + +#if 0 +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#else +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_M88E1111_PHY 1 +#define CONFIG_IBM_EMAC4_V4 1 +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */ + +#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ + +#define CONFIG_HAS_ETH0 +#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ + +#define CONFIG_NET_MULTI 1 +#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ +#define CONFIG_PHY1_ADDR 1 + +/* USB */ +#define CONFIG_USB_OHCI +#define CONFIG_USB_STORAGE + +/* Comment this out to enable USB 1.1 device */ +#define USB_2_0_DEVICE + - #define CMD_USB CFG_CMD_USB - +/* Partitions */ +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION + - #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_BSP | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_IMMAP | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM | \ - CMD_USB) ++/* ++ * BOOTP options ++ */ ++#define CONFIG_BOOTP_BOOTFILESIZE ++#define CONFIG_BOOTP_BOOTPATH ++#define CONFIG_BOOTP_GATEWAY ++#define CONFIG_BOOTP_HOSTNAME + - #define CONFIG_SUPPORT_VFAT ++/* ++ * Command line configuration. ++ */ ++#include ++ ++#define CONFIG_CMD_ASKENV ++#define CONFIG_CMD_BSP ++#define CONFIG_CMD_DHCP ++#define CONFIG_CMD_DIAG ++#define CONFIG_CMD_EEPROM ++#define CONFIG_CMD_ELF ++#define CONFIG_CMD_FLASH ++#define CONFIG_CMD_FAT ++#define CONFIG_CMD_I2C ++#define CONFIG_CMD_IMMAP ++#define CONFIG_CMD_IRQ ++#define CONFIG_CMD_MII ++#define CONFIG_CMD_NET ++#define CONFIG_CMD_NFS ++#define CONFIG_CMD_PING ++#define CONFIG_CMD_REGINFO ++#define CONFIG_CMD_SDRAM ++#define CONFIG_CMD_USB + - /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ - #include ++#define CONFIG_SUPPORT_VFAT + +/*----------------------------------------------------------------------- + * Miscellaneous configurable options + *----------------------------------------------------------------------*/ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ - #if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#if defined(CONFIG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------*/ +/* General PCI */ +#define CONFIG_PCI /* include pci support */ +#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/ + +/* Board-specific PCI */ +#define CFG_PCI_TARGET_INIT +#define CFG_PCI_MASTER_INIT + +#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ +#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + *----------------------------------------------------------------------*/ +#define CFG_FLASH CFG_FLASH_BASE +#define CFG_CS_1 0xC8000000 /* CAN */ +#define CFG_CS_2 0xCC000000 /* CPLD and IMC-Bus Standard */ +#define CFG_CPLD CFG_CS_2 +#define CFG_CS_3 0xCD000000 /* CPLD and IMC-Bus Fast */ + +/*----------------------------------------------------------------------- + * FLASH organization + * Memory Bank 0 (BOOT-FLASH) initialization + */ +#define CFG_BOOTFLASH_CS 0 /* Boot Flash chip connected to CSx */ +#define CFG_EBC_PB0AP 0x02005400 +#define CFG_EBC_PB0CR 0xFFF18000 /* (CFG_FLASH | 0xda000) */ +#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 32 /* max number of sectors on one chip */ + + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +/* Memory Bank 1 CAN-Chips initialization */ +#define CFG_EBC_PB1AP 0x02054500 +#define CFG_EBC_PB1CR 0xC8018000 + +/* Memory Bank 2 CPLD/IMC-Bus standard initialization */ +#define CFG_EBC_PB2AP 0x01840300 +#define CFG_EBC_PB2CR 0xCC0BA000 + +/* Memory Bank 3 IMC-Bus fast mode initialization */ +#define CFG_EBC_PB3AP 0x01800300 +#define CFG_EBC_PB3CR 0xCE0BA000 + +/* Memory Bank 4 (not used) initialization */ +#undef CFG_EBC_PB4AP +#undef CFG_EBC_PB4CR + +/* Memory Bank 5 (not used) initialization */ +#undef CFG_EBC_PB5AP +#undef CFG_EBC_PB5CR + +#define HCU_CPLD_VERSION_REGISTER ( CFG_CPLD + 0x0F00000 ) +#define HCU_HW_VERSION_REGISTER ( CFG_CPLD + 0x1400000 ) + +/*----------------------------------------------------------------------- + * Cache Configuration + *----------------------------------------------------------------------*/ +#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */ +#define CFG_CACHELINE_SIZE 32 /* ... */ - #if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ - #endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_HUSH_PARSER /* use "hush" command parser */ +#ifdef CFG_HUSH_PARSER + #define CFG_PROMPT_HUSH_PS2 "> " +#endif + - #if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#if defined(CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif +#endif /* __CONFIG_H */ diff --cc include/configs/luan.h index e192d06923,72aae09d03..26dbec92e9 --- a/include/configs/luan.h +++ b/include/configs/luan.h @@@ -212,25 -213,36 +212,32 @@@ #define CONFIG_HW_WATCHDOG /* watchdog */ #endif - #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_ELF | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM | \ - 0) -- - /* this must be included AFTER the definition of CONFIG_COMMANDS */ - #include + /* + * BOOTP options + */ + #define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_BOOTP_BOOTPATH + #define CONFIG_BOOTP_GATEWAY + #define CONFIG_BOOTP_HOSTNAME + - + /* + * Command line configuration. + */ + #include + + #define CONFIG_CMD_ASKENV + #define CONFIG_CMD_DHCP -#define CONFIG_CMD_ELF + #define CONFIG_CMD_EEPROM + #define CONFIG_CMD_I2C + #define CONFIG_CMD_IRQ + #define CONFIG_CMD_MII + #define CONFIG_CMD_NET + #define CONFIG_CMD_NFS + #define CONFIG_CMD_PCI + #define CONFIG_CMD_PING + #define CONFIG_CMD_REGINFO + #define CONFIG_CMD_SDRAM - /* * Miscellaneous configurable options */ diff --cc include/configs/lwmon5.h index 52db71e89d,ef9ab22b60..604b7d12f8 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@@ -252,31 -223,43 +249,41 @@@ #define CONFIG_DOS_PARTITION #define CONFIG_ISO_PARTITION - #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_FAT | \ - CFG_CMD_LOG | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM | \ - CMD_USB) - + /* + * BOOTP options + */ + #define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_BOOTP_BOOTPATH + #define CONFIG_BOOTP_GATEWAY + #define CONFIG_BOOTP_HOSTNAME - #define CONFIG_SUPPORT_VFAT - + /* + * Command line configuration. + */ + #include + + #define CONFIG_CMD_ASKENV + #define CONFIG_CMD_DATE + #define CONFIG_CMD_DHCP + #define CONFIG_CMD_DIAG + #define CONFIG_CMD_EEPROM + #define CONFIG_CMD_ELF + #define CONFIG_CMD_FAT + #define CONFIG_CMD_I2C + #define CONFIG_CMD_IRQ ++#define CONFIG_CMD_LOG + #define CONFIG_CMD_MII + #define CONFIG_CMD_NET + #define CONFIG_CMD_NFS + #define CONFIG_CMD_PCI + #define CONFIG_CMD_PING + #define CONFIG_CMD_REGINFO + #define CONFIG_CMD_SDRAM - /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ - #include + #ifdef CONFIG_440EPX + #define CONFIG_CMD_USB + #endif - /*----------------------------------------------------------------------- * Miscellaneous configurable options *----------------------------------------------------------------------*/ diff --cc include/configs/taihu.h index 61814a8096,0000000000..d623e56009 mode 100644,000000..100644 --- a/include/configs/taihu.h +++ b/include/configs/taihu.h @@@ -1,473 -1,0 +1,476 @@@ +/* + * (C) Copyright 2000-2005 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2005-2007 + * Beijing UD Technology Co., Ltd., taihusupport@amcc.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + + +#define CONFIG_405EP 1 /* this is a PPC405 CPU */ +#define CONFIG_4xx 1 /* member of PPC4xx family */ +#define CONFIG_TAIHU 1 /* on a taihu board */ + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f */ + +#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ + +#define CONFIG_NO_SERIAL_EEPROM + +/*----------------------------------------------------------------------------*/ +#ifdef CONFIG_NO_SERIAL_EEPROM + +/* +!------------------------------------------------------------------------------- +! PLL settings for 333MHz CPU, 111MHz PLB/SDRAM, 55MHz EBC, 33MHz PCI, +! assuming a 33MHz input clock to the 405EP from the C9531. +!------------------------------------------------------------------------------- +*/ +#define PLLMR0_333_111_55_37 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \ + PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \ + PLL_MALDIV_1 | PLL_PCIDIV_3) +#define PLLMR1_333_111_55_37 (PLL_FBKDIV_10 | \ + PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI) +#define PLLMR0_333_111_55_111 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \ + PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \ + PLL_MALDIV_1 | PLL_PCIDIV_1) +#define PLLMR1_333_111_55_111 (PLL_FBKDIV_10 | \ + PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI) + +#define PLLMR0_DEFAULT PLLMR0_333_111_55_37 +#define PLLMR1_DEFAULT PLLMR1_333_111_55_37 +#define PLLMR0_DEFAULT_PCI66 PLLMR0_333_111_55_111 +#define PLLMR1_DEFAULT_PCI66 PLLMR1_333_111_55_111 + +#endif +/*----------------------------------------------------------------------------*/ + +#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ + +#define CONFIG_ENV_OVERWRITE 1 +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootfile=/tftpboot/taihu/uImage\0" \ + "rootpath=/opt/eldk/ppc_4xx\0" \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "kernel_addr=FC000000\0" \ + "ramdisk_addr=FC180000\0" \ + "load=tftp 200000 /tftpboot/taihu/u-boot.bin\0" \ + "update=protect off FFFC0000 FFFFFFFF;era FFFC0000 FFFFFFFF;" \ + "cp.b 200000 FFFC0000 40000\0" \ + "upd=run load;run update\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" + +#if 0 +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#else +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 0x14 /* PHY address */ +#define CONFIG_HAS_ETH1 +#define CONFIG_PHY1_ADDR 0x10 /* EMAC1 PHY address */ +#define CONFIG_NET_MULTI 1 +#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */ +#define CONFIG_PHY_RESET 1 + - #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_CACHE | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_SPI | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM ) - - /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ - #include ++/* ++ * BOOTP options ++ */ ++#define CONFIG_BOOTP_BOOTFILESIZE ++#define CONFIG_BOOTP_BOOTPATH ++#define CONFIG_BOOTP_GATEWAY ++#define CONFIG_BOOTP_HOSTNAME ++ ++/* ++ * Command line configuration. ++ */ ++#include ++ ++#define CONFIG_CMD_ASKENV ++#define CONFIG_CMD_CACHE ++#define CONFIG_CMD_DHCP ++#define CONFIG_CMD_EEPROM ++#define CONFIG_CMD_ELF ++#define CONFIG_CMD_I2C ++#define CONFIG_CMD_IRQ ++#define CONFIG_CMD_MII ++#define CONFIG_CMD_NET ++#define CONFIG_CMD_PCI ++#define CONFIG_CMD_PING ++#define CONFIG_CMD_REGINFO ++#define CONFIG_CMD_SDRAM ++#define CONFIG_CMD_SPI + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +#undef CONFIG_SPD_EEPROM /* use SPD EEPROM for setup */ +#define CFG_SDRAM_SIZE_PER_BANK 0x04000000 /* 64MB */ +#define CFG_SDRAM_BANKS 2 + +/* + * SDRAM configuration (please see cpu/ppc/sdram.[ch]) + */ +#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ +#define CONFIG_SDRAM_BANK1 1 /* init onboard SDRAM bank 1 */ + +/* SDRAM timings used in datasheet */ +#define CFG_SDRAM_CL 3 /* CAS latency */ +#define CFG_SDRAM_tRP 20 /* PRECHARGE command period */ +#define CFG_SDRAM_tRC 66 /* ACTIVE-to-ACTIVE command period */ +#define CFG_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */ +#define CFG_SDRAM_tRFC 66 /* Auto refresh period */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ - #if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#if defined(CONFIG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* print buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +/* + * If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1. + * If CFG_405_UART_ERRATA_59, then UART divisor is 31. + * Otherwise, UART divisor is determined by CPU Clock and CFG_BASE_BAUD value. + * The Linux BASE_BAUD define should match this configuration. + * baseBaud = cpuClock/(uartDivisor*16) + * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock, + * set Linux BASE_BAUD to 403200. + */ +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */ +#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ +#define CFG_BASE_BAUD 691200 + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_UART1_CONSOLE 1 + - +/* The following table includes the supported baudrates */ +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +/*----------------------------------------------------------------------- + * I2C stuff + *----------------------------------------------------------------------- + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +#define CFG_I2C_NOPROBES { 0x69 } /* avoid iprobe hangup (why?) */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 6 /* 24C02 requires 5ms delay */ + - #if (CONFIG_COMMANDS & CFG_CMD_EEPROM) +#define CFG_I2C_EEPROM_ADDR 0x50 /* I2C boot EEPROM (24C02W) */ +#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ - #endif - + +#define CONFIG_SOFT_SPI +#define SPI_SCL spi_scl +#define SPI_SDA spi_sda +#define SPI_READ spi_read() +#define SPI_DELAY udelay(2) +#ifndef __ASSEMBLY__ +void spi_scl(int); +void spi_sda(int); +unsigned char spi_read(void); +#endif + +/* standard dtt sensor configuration */ +#define CONFIG_DTT_DS1775 1 +#define CONFIG_DTT_SENSORS { 0 } + +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------- + */ +#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ +#define PCI_HOST_FORCE 1 /* configure as pci host */ +#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ + +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + /* resource configuration */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ + +#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ +#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ +#define CFG_PCI_CLASSCODE 0x0600 /* PCI Class Code: bridge/host */ +#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ +#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */ +#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ +#define CFG_PCI_PTM2LA 0x00000000 /* disabled */ +#define CFG_PCI_PTM2MS 0x00000000 /* disabled */ +#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ +#define CONFIG_EEPRO100 1 + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE 0xFFE00000 +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ +#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN) + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ + +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_FLASH_ADDR0 0x555 +#define CFG_FLASH_ADDR1 0x2aa +#define CFG_FLASH_WORD_SIZE unsigned short + +#ifdef CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#endif /* CFG_ENV_IS_IN_FLASH */ + +/*----------------------------------------------------------------------- + * NVRAM organization + */ +#define CFG_NVRAM_BASE_ADDR 0xf0000000 /* NVRAM base address */ +#define CFG_NVRAM_SIZE 0x1ff8 /* NVRAM size */ + +#ifdef CFG_ENV_IS_IN_NVRAM +#define CFG_ENV_SIZE 0x0ff8 /* Size of Environment vars */ +#define CFG_ENV_ADDR \ + (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE) /* Env*/ +#endif + +/*----------------------------------------------------------------------- + * PPC405 GPIO Configuration + */ +#define CFG_440_GPIO_TABLE { /* GPIO Alternate1 */ \ +{ \ +/* GPIO Core 0 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO0 PerBLast SPI CS */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO1 TS1E */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO2 TS2E */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO3 TS1O */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO4 TS2O */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO5 TS3 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO6 TS4 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO7 TS5 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO8 TS6 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO9 TrcClk */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO10 PerCS1 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO11 PerCS2 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO12 PerCS3 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO13 PerCS4 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO14 PerAddr03 SPI SCLK */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO15 PerAddr04 SPI DI */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO16 PerAddr05 SPI DO */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO17 IRQ0 PCI INTA */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO18 IRQ1 PCI INTB */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO19 IRQ2 PCI INTC */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO20 IRQ3 PCI INTD */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO21 IRQ4 USB */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO22 IRQ5 EBC */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO23 IRQ6 unused */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO24 UART0_DCD UART1 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO25 UART0_DSR */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO26 UART0_RI */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO27 UART0_DTR */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28 UART1_Rx UART0 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO29 UART1_Tx */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO30 RejectPkt0 User LED1 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO31 RejectPkt1 User LED2 */ \ +} \ +} + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_DCACHE_SIZE 16384 /* For IBM 405EP CPU */ +#define CFG_CACHELINE_SIZE 32 - #if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ - #endif + +/* + * Init Memory Controller: + * + * BR0/1 and OR0/1 (FLASH) + */ + +#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */ +#define FLASH_BASE1_PRELIM 0xFC000000 /* FLASH bank #1 */ + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in data cache) + */ +/* use on chip memory (OCM) for temperary stack until sdram is tested */ +#define CFG_TEMP_STACK_OCM 1 + +/* On Chip Memory location */ +#define CFG_OCM_DATA_ADDR 0xF8000000 +#define CFG_OCM_DATA_SIZE 0x1000 +#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of SDRAM */ +#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */ + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + */ + +/* Memory Bank 0 (Flash/SRAM) initialization */ +#define CFG_EBC_PB0AP 0x03815600 +#define CFG_EBC_PB0CR 0xFFE3A000 /* BAS=0xFFE,BS=2MB,BU=R/W,BW=16bit */ + +/* Memory Bank 1 (NVRAM/RTC) initialization */ +#define CFG_EBC_PB1AP 0x05815600 +#define CFG_EBC_PB1CR 0xFC0BA000 /* BAS=0xFc0,BS=32MB,BU=R/W,BW=16bit */ + +/* Memory Bank 2 (USB device) initialization */ +#define CFG_EBC_PB2AP 0x03016600 +#define CFG_EBC_PB2CR 0x50018000 /* BAS=0x500,BS=1MB,BU=R/W,BW=8bit */ + +/* Memory Bank 3 (LCM and D-flip-flop) initialization */ +#define CFG_EBC_PB3AP 0x158FF600 +#define CFG_EBC_PB3CR 0x50118000 /* BAS=0x501,BS=1MB,BU=R/W,BW=8bit */ + +/* Memory Bank 4 (not install) initialization */ +#define CFG_EBC_PB4AP 0x158FF600 +#define CFG_EBC_PB4CR 0x5021A000 + +/*----------------------------------------------------------------------- + * Definitions for GPIO setup (PPC405EP specific) + * + * GPIO0[0] - External Bus Controller BLAST output + * GPIO0[1-9] - Instruction trace outputs + * GPIO0[10-13] - External Bus Controller CS_1 - CS_4 outputs + * GPIO0[14-16] - External Bus Controller ABUS3-ABUS5 outputs + * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs + * GPIO0[24-27] - UART0 control signal inputs/outputs + * GPIO0[28-29] - UART1 data signal input/output + * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs + */ +#define CFG_GPIO0_OSRH 0x15555550 /* output select high/low */ +#define CFG_GPIO0_OSRL 0x00000110 +#define CFG_GPIO0_ISR1H 0x00000001 /* input select high/low */ +#define CFG_GPIO0_ISR1L 0x15545440 +#define CFG_GPIO0_TSRH 0x00000000 /* three-state select high/low */ +#define CFG_GPIO0_TSRL 0x00000000 +#define CFG_GPIO0_TCR 0xFFFE8117 /* three-state control */ +#define CFG_GPIO0_ODR 0x00000000 /* open drain */ + +#define GPIO0 0 /* GPIO controller 0 */ + +/* the GPIO macros in include/ppc405.h for High/Low registers are backwards */ + +#define GPIOx_OSL (GPIO0_OSRH-GPIO_BASE) +#define GPIOx_TSL (GPIO0_TSRH-GPIO_BASE) +#define GPIOx_IS1L (GPIO0_ISR1H-GPIO_BASE) +#define GPIOx_IS2L (GPIO0_ISR1H-GPIO_BASE) +#define GPIOx_IS3L (GPIO0_ISR1H-GPIO_BASE) + +#define GPIO_OS(x) (x+GPIOx_OSL) /* GPIO output select */ +#define GPIO_TS(x) (x+GPIOx_TSL) /* GPIO three-state select */ +#define GPIO_IS1(x) (x+GPIOx_IS1L) /* GPIO input select */ +#define GPIO_IS2(x) (x+GPIOx_IS1L) +#define GPIO_IS3(x) (x+GPIOx_IS1L) + +#define CPLD_REG0_ADDR 0x50100000 +#define CPLD_REG1_ADDR 0x50100001 +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + - #if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#if defined(CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +#endif /* __CONFIG_H */ diff --cc include/configs/zeus.h index 86a16e77a5,0000000000..605755a87e mode 100644,000000..100644 --- a/include/configs/zeus.h +++ b/include/configs/zeus.h @@@ -1,375 -1,0 +1,382 @@@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************ + * zeus.h - configuration for Zeus board + ***********************************************************************/ +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +#define CONFIG_ZEUS 1 /* Board is Zeus */ +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_405EP 1 /* Specifc 405EP support*/ + +#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ + +#define PLLMR0_DEFAULT PLLMR0_333_111_55_111 +#define PLLMR1_DEFAULT PLLMR1_333_111_55_111 + +#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ + +#define CONFIG_OVERWRITE_ETHADDR_ONCE 1 + +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 0x01 /* PHY address */ +#define CONFIG_HAS_ETH1 1 +#define CONFIG_PHY1_ADDR 0x11 /* EMAC1 PHY address */ +#define CONFIG_NET_MULTI 1 +#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */ +#define CONFIG_PHY_RESET 1 +#define CONFIG_PHY_RESET_DELAY 300 /* PHY RESET recovery delay */ + - #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_CACHE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_LOG | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO) ++/* ++ * BOOTP options ++ */ ++#define CONFIG_BOOTP_BOOTFILESIZE ++#define CONFIG_BOOTP_BOOTPATH ++#define CONFIG_BOOTP_GATEWAY ++#define CONFIG_BOOTP_HOSTNAME ++ ++/* ++ * Command line configuration. ++ */ ++#include ++ ++#define CONFIG_CMD_ASKENV ++#define CONFIG_CMD_CACHE ++#define CONFIG_CMD_DHCP ++#define CONFIG_CMD_DIAG ++#define CONFIG_CMD_EEPROM ++#define CONFIG_CMD_ELF ++#define CONFIG_CMD_I2C ++#define CONFIG_CMD_IRQ ++#define CONFIG_CMD_LOG ++#define CONFIG_CMD_MII ++#define CONFIG_CMD_NET ++#define CONFIG_CMD_NFS ++#define CONFIG_CMD_PING ++#define CONFIG_CMD_REGINFO + +/* POST support */ +#define CONFIG_POST (CFG_POST_MEMORY | \ + CFG_POST_CPU | \ + CFG_POST_CACHE | \ + CFG_POST_UART | \ + CFG_POST_ETHER) + +#define CFG_POST_ETHER_EXT_LOOPBACK /* eth POST using ext loopack connector */ + +/* Define here the base-addresses of the UARTs to test in POST */ +#define CFG_POST_UART_TABLE {UART0_BASE} + +#define CONFIG_LOGBUFFER +#define CFG_POST_CACHE_ADDR 0x00800000 /* free virtual address */ + +#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */ + - /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ - #include - +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/*----------------------------------------------------------------------- + * SDRAM + *----------------------------------------------------------------------*/ +/* + * SDRAM configuration (please see cpu/ppc/sdram.[ch]) + */ +#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ +#define CONFIG_SDRAM_BANK1 1 /* init onboard SDRAM bank 1 */ + +/* SDRAM timings used in datasheet */ +#define CFG_SDRAM_CL 3 /* CAS latency */ +#define CFG_SDRAM_tRP 20 /* PRECHARGE command period */ +#define CFG_SDRAM_tRC 66 /* ACTIVE-to-ACTIVE command period */ +#define CFG_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */ +#define CFG_SDRAM_tRFC 66 /* Auto refresh period */ + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */ +#define CFG_BASE_BAUD 691200 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SERIAL_MULTI + +/* The following table includes the supported baudrates */ +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} + +/*----------------------------------------------------------------------- + * Miscellaneous configurable options + *----------------------------------------------------------------------*/ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ - #if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#if defined(CONFIG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +/*----------------------------------------------------------------------- + * I2C + *----------------------------------------------------------------------*/ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +/* these are for the ST M24C02 2kbit serial i2c eeprom */ +#define CFG_I2C_EEPROM_ADDR 0x50 /* base address */ +#define CFG_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */ +/* mask of address bits that overflow into the "EEPROM chip address" */ +#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07 + +#define CFG_EEPROM_PAGE_WRITE_ENABLE 1 /* write eeprom in pages */ +#define CFG_EEPROM_PAGE_WRITE_BITS 3 /* 8 byte write page size */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ + +/* + * The layout of the I2C EEPROM, used for bootstrap setup and for board- + * specific values, like ethaddr... that can be restored via the sw-reset + * button + */ +#define FACTORY_RESET_I2C_EEPROM 0x50 +#define FACTORY_RESET_ENV_OFFS 0x80 +#define FACTORY_RESET_ENV_SIZE 0x80 + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE 0xFF000000 +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ +#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN) + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ + +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } + +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */ + +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ + +#ifdef CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ +#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#endif + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_DCACHE_SIZE 16384 /* For IBM 405EP CPU */ +#define CFG_CACHELINE_SIZE 32 /* ... */ - #if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ - #endif + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in data cache) + */ +/* use on chip memory (OCM) for temperary stack until sdram is tested */ +#define CFG_TEMP_STACK_OCM 1 + +/* On Chip Memory location */ +#define CFG_OCM_DATA_ADDR 0xF8000000 +#define CFG_OCM_DATA_SIZE 0x1000 +#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of OCM */ +#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */ + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +/* reserve some memory for POST and BOOT limit info */ +#define CFG_INIT_SP_OFFSET (CFG_GBL_DATA_OFFSET - 16) + +/* extra data in OCM */ +#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 4) +#define CFG_POST_MAGIC (CFG_OCM_DATA_ADDR + CFG_GBL_DATA_OFFSET - 8) +#define CFG_POST_VAL (CFG_OCM_DATA_ADDR + CFG_GBL_DATA_OFFSET - 12) + +/*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + */ + +/* Memory Bank 0 (Flash 16M) initialization */ +#define CFG_EBC_PB0AP 0x05815600 +#define CFG_EBC_PB0CR 0xFF09A000 /* BAS=0xFF0,BS=16MB,BU=R/W,BW=16bit */ + +/*----------------------------------------------------------------------- + * Definitions for GPIO setup (PPC405EP specific) + * + * GPIO0[0] - External Bus Controller BLAST output + * GPIO0[1-9] - Instruction trace outputs + * GPIO0[10-13] - External Bus Controller CS_1 - CS_4 outputs + * GPIO0[14-16] - External Bus Controller ABUS3-ABUS5 outputs + * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs + * GPIO0[24-27] - UART0 control signal inputs/outputs + * GPIO0[28-29] - UART1 data signal input/output + * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs + */ +#define CFG_GPIO0_OSRH 0x15555550 /* Chip selects */ +#define CFG_GPIO0_OSRL 0x00000110 /* UART_DTR-pin 27 alt out */ +#define CFG_GPIO0_ISR1H 0x10000041 /* Pin 2, 12 is input */ +#define CFG_GPIO0_ISR1L 0x15505440 /* OUT: LEDs 22/23; IN: pin12,2, NVALID# */ +#define CFG_GPIO0_TSRH 0x00000000 +#define CFG_GPIO0_TSRL 0x00000000 +#define CFG_GPIO0_TCR 0xBFF68317 /* 3-state OUT: 22/23/29; 12,2 is not 3-state */ +#define CFG_GPIO0_ODR 0x00000000 + +#define CFG_GPIO_SW_RESET 1 +#define CFG_GPIO_ZEUS_PE 12 +#define CFG_GPIO_LED_RED 22 +#define CFG_GPIO_LED_GREEN 23 + +/* Time in milli-seconds */ +#define CFG_TIME_POST 5000 +#define CFG_TIME_FACTORY_RESET 10000 + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + - #if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#if defined(CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* ENVIRONMENT VARS */ + +#define CONFIG_PREBOOT "echo;echo Welcome to Bulletendpoints board v1.1;echo" +#define CONFIG_IPADDR 192.168.1.10 +#define CONFIG_SERVERIP 192.168.1.100 +#define CONFIG_GATEWAYIP 192.168.1.100 +#define CONFIG_ETHADDR 50:00:00:00:06:00 +#define CONFIG_ETH1ADDR 50:00:00:00:06:01 +#if 0 +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#else +#define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */ +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "logversion=2\0" \ + "hostname=zeus\0" \ + "netdev=eth0\0" \ + "ethact=ppc_4xx_eth0\0" \ + "netmask=255.255.255.0\0" \ + "ramdisk_size=50000\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw" \ + " nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw" \ + " ramdisk=${ramdisk_size}\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0," \ + "${baudrate}\0" \ + "net_nfs=tftp ${kernel_mem_addr} ${file_kernel};" \ + "run nfsargs addip addtty;bootm\0" \ + "net_ram=tftp ${kernel_mem_addr} ${file_kernel};" \ + "tftp ${ramdisk_mem_addr} ${file_fs};" \ + "run ramargs addip addtty;" \ + "bootm ${kernel_mem_addr} ${ramdisk_mem_addr}\0" \ + "rootpath=/target_fs/zeus\0" \ + "kernel_fl_addr=ff000000\0" \ + "kernel_mem_addr=200000\0" \ + "ramdisk_fl_addr=ff300000\0" \ + "ramdisk_mem_addr=4000000\0" \ + "uboot_fl_addr=fffc0000\0" \ + "uboot_mem_addr=100000\0" \ + "file_uboot=/zeus/u-boot.bin\0" \ + "tftp_uboot=tftp 100000 ${file_uboot}\0" \ + "update_uboot=protect off fffc0000 ffffffff;" \ + "era fffc0000 ffffffff;cp.b 100000 fffc0000 40000;" \ + "protect on fffc0000 ffffffff\0" \ + "upd_uboot=run tftp_uboot;run update_uboot\0" \ + "file_kernel=/zeus/uImage_ba\0" \ + "tftp_kernel=tftp 100000 ${file_kernel}\0" \ + "update_kernel=protect off ff000000 ff17ffff;" \ + "era ff000000 ff17ffff;cp.b 100000 ff000000 180000\0" \ + "upd_kernel=run tftp_kernel;run update_kernel\0" \ + "file_fs=/zeus/rootfs_ba.img\0" \ + "tftp_fs=tftp 100000 ${file_fs}\0" \ + "update_fs=protect off ff300000 ff87ffff;era ff300000 ff87ffff;"\ + "cp.b 100000 ff300000 580000\0" \ + "upd_fs=run tftp_fs;run update_fs\0" \ + "bootcmd=chkreset;run ramargs addip addtty addmisc;" \ + "bootm ${kernel_fl_addr} ${ramdisk_fl_addr}\0" \ + "" + +#endif /* __CONFIG_H */