From: Wolfgang Denk Date: Sat, 16 May 2009 08:47:45 +0000 (+0200) Subject: MPC512x: remove include/mpc512x.h X-Git-Tag: v2009.08-rc1~153^2~43 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=3b74e7ec58e2cc352b0a396a614065cfeb8d138f;p=u-boot MPC512x: remove include/mpc512x.h Move needed definitions (register descriptions etc.) from include/mpc512x.h into include/asm-ppc/immap_512x.h. Instead of using a #define'd register offset, use a function that provides the PATA controller's base address. All the rest of include/mpc512x.h are register offset definitions which can be eliminated by proper use of C structures. There are only a few register offsets remaining that are needed in cpu/mpc512x/start.S; for these we provide cpu/mpc512x/asm-offsets.h which is intended as a temporary workaround only. In a later patch this file will be removed, too, and then auto-generated from the respective C structs. Signed-off-by: Wolfgang Denk Cc: John Rigby --- diff --git a/common/cmd_ide.c b/common/cmd_ide.c index feda773bee..4d7a0ac9e4 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -45,10 +45,6 @@ #include #endif -#ifdef CONFIG_MPC512X -#include -#endif - #include #include diff --git a/cpu/mpc512x/asm-offsets.h b/cpu/mpc512x/asm-offsets.h new file mode 100644 index 0000000000..4b147783fb --- /dev/null +++ b/cpu/mpc512x/asm-offsets.h @@ -0,0 +1,15 @@ +/* + * needed for cpu/mpc512x/start.S + * + * These should be auto-generated + */ +#define LPCS0AW 0x0024 +#define SRAMBAR 0x00C4 +#define SWCRR 0x0904 +#define LPC_OFFSET 0x10000 +#define CS0_CONFIG 0x00000 +#define CS_CTRL 0x00020 +#define CS_CTRL_ME 0x01000000 /* CS Master Enable bit */ + +#define EXC_OFF_SYS_RESET 0x0100 +#define _START_OFFSET EXC_OFF_SYS_RESET diff --git a/cpu/mpc512x/cpu.c b/cpu/mpc512x/cpu.c index 8021bc15e3..42ccd81e76 100644 --- a/cpu/mpc512x/cpu.c +++ b/cpu/mpc512x/cpu.c @@ -29,7 +29,6 @@ #include #include -#include #include #include #include diff --git a/cpu/mpc512x/cpu_init.c b/cpu/mpc512x/cpu_init.c index 69ec871995..fe6beaf84d 100644 --- a/cpu/mpc512x/cpu_init.c +++ b/cpu/mpc512x/cpu_init.c @@ -25,7 +25,6 @@ */ #include -#include #include #include diff --git a/cpu/mpc512x/i2c.c b/cpu/mpc512x/i2c.c index 4a3f9a0873..97bda0d84e 100644 --- a/cpu/mpc512x/i2c.c +++ b/cpu/mpc512x/i2c.c @@ -30,7 +30,6 @@ DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_HARD_I2C -#include #include /* by default set I2C bus 0 active */ diff --git a/cpu/mpc512x/speed.c b/cpu/mpc512x/speed.c index 0fec00461c..ce8d0949b2 100644 --- a/cpu/mpc512x/speed.c +++ b/cpu/mpc512x/speed.c @@ -26,7 +26,6 @@ */ #include -#include #include #include #include diff --git a/cpu/mpc512x/start.S b/cpu/mpc512x/start.S index 360682dafc..178e5d1b3c 100644 --- a/cpu/mpc512x/start.S +++ b/cpu/mpc512x/start.S @@ -1,7 +1,7 @@ /* * Copyright (C) 1998 Dan Malek * Copyright (C) 1999 Magnus Damm - * Copyright (C) 2000, 2001, 2002, 2007 Wolfgang Denk + * Copyright (C) 2000-2009 Wolfgang Denk * Copyright Freescale Semiconductor, Inc. 2004, 2006. All rights reserved. * * See file CREDITS for list of people who contributed to this @@ -30,12 +30,14 @@ */ #include -#include #include #include #define CONFIG_521X 1 /* needed for Linux kernel header files*/ +#include +#include "asm-offsets.h" + #include #include diff --git a/drivers/net/mpc512x_fec.c b/drivers/net/mpc512x_fec.c index 62931d1c99..fb2c19a71b 100644 --- a/drivers/net/mpc512x_fec.c +++ b/drivers/net/mpc512x_fec.c @@ -7,7 +7,6 @@ */ #include -#include #include #include #include @@ -27,11 +26,11 @@ DECLARE_GLOBAL_DATA_PTR; #endif #if (DEBUG & 0x40) -static uint32 local_crc32(char *string, unsigned int crc_value, int len); +static u32 local_crc32(char *string, unsigned int crc_value, int len); #endif -int fec512x_miiphy_read(char *devname, uint8 phyAddr, uint8 regAddr, uint16 * retVal); -int fec512x_miiphy_write(char *devname, uint8 phyAddr, uint8 regAddr, uint16 data); +int fec512x_miiphy_read(char *devname, u8 phyAddr, u8 regAddr, u16 * retVal); +int fec512x_miiphy_write(char *devname, u8 phyAddr, u8 regAddr, u16 data); int mpc512x_fec_init_phy(struct eth_device *dev, bd_t * bis); static uchar rx_buff[FEC_BUFFER_SIZE]; @@ -41,9 +40,9 @@ static int rx_buff_idx = 0; #if (DEBUG & 0x2) static void mpc512x_fec_phydump (char *devname) { - uint16 phyStatus, i; - uint8 phyAddr = CONFIG_PHY_ADDR; - uint8 reg_mask[] = { + u16 phyStatus, i; + u8 phyAddr = CONFIG_PHY_ADDR; + u8 reg_mask[] = { /* regs to print: 0...8, 21,27,31 */ 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, @@ -68,7 +67,7 @@ static int mpc512x_fec_bd_init (mpc512x_fec_priv *fec) */ for (ix = 0; ix < FEC_RBD_NUM; ix++) { fec->bdBase->rbd[ix].dataPointer = - (uint32)&fec->bdBase->recv_frames[ix]; + (u32)&fec->bdBase->recv_frames[ix]; fec->bdBase->rbd[ix].status = FEC_RBD_EMPTY; fec->bdBase->rbd[ix].dataLength = 0; } @@ -167,10 +166,10 @@ static void mpc512x_fec_tbd_scrub (mpc512x_fec_priv *fec) /********************************************************************/ static void mpc512x_fec_set_hwaddr (mpc512x_fec_priv *fec, char *mac) { - uint8 currByte; /* byte for which to compute the CRC */ + u8 currByte; /* byte for which to compute the CRC */ int byte; /* loop - counter */ int bit; /* loop - counter */ - uint32 crc = 0xffffffff; /* initial value */ + u32 crc = 0xffffffff; /* initial value */ /* * The algorithm used is the following: @@ -257,8 +256,8 @@ static int mpc512x_fec_init (struct eth_device *dev, bd_t * bis) out_be32(&fec->eth->r_buff_size, FEC_BUFFER_SIZE); /* Setup BD base addresses */ - out_be32(&fec->eth->r_des_start, (uint32)fec->bdBase->rbd); - out_be32(&fec->eth->x_des_start, (uint32)fec->bdBase->tbd); + out_be32(&fec->eth->r_des_start, (u32)fec->bdBase->rbd); + out_be32(&fec->eth->x_des_start, (u32)fec->bdBase->tbd); /* DMA Control */ out_be32(&fec->eth->dma_control, 0xc0000000); @@ -282,9 +281,9 @@ static int mpc512x_fec_init (struct eth_device *dev, bd_t * bis) int mpc512x_fec_init_phy (struct eth_device *dev, bd_t * bis) { mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv; - const uint8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */ + const u8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */ int timeout = 1; - uint16 phyStatus; + u16 phyStatus; #if (DEBUG & 0x1) printf ("mpc512x_fec_init_phy... Begin\n"); @@ -495,7 +494,7 @@ static int mpc512x_fec_send (struct eth_device *dev, volatile void *eth_data, */ pTbd = &fec->bdBase->tbd[fec->tbdIndex]; pTbd->dataLength = data_length; - pTbd->dataPointer = (uint32)eth_data; + pTbd->dataPointer = (u32)eth_data; pTbd->status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY; fec->tbdIndex = (fec->tbdIndex + 1) % FEC_TBD_NUM; @@ -581,7 +580,7 @@ static int mpc512x_fec_recv (struct eth_device *dev) printf ("recv data length 0x%08x data hdr: ", pRbd->dataLength); for (i = 0; i < 14; i++) - printf ("%x ", *((uint8*)pRbd->dataPointer + i)); + printf ("%x ", *((u8*)pRbd->dataPointer + i)); printf("\n"); } #endif @@ -647,14 +646,15 @@ int mpc512x_fec_initialize (bd_t * bis) #endif /* Clean up space FEC's MIB and FIFO RAM ...*/ - memset ((void *) MPC512X_FEC + 0x200, 0x00, 0x400); + memset ((void *)&im->fec.mib, 0x00, sizeof(im->fec.mib)); + memset ((void *)&im->fec.fifo, 0x00, sizeof(im->fec.fifo)); /* * Malloc space for BDs (must be quad word-aligned) * this pointer is lost, so cannot be freed */ bd = malloc (sizeof(mpc512x_buff_descs) + 0x1f); - fec->bdBase = (mpc512x_buff_descs*)((uint32)bd & 0xfffffff0); + fec->bdBase = (mpc512x_buff_descs*)((u32)bd & 0xfffffff0); memset ((void *) bd, 0x00, sizeof(mpc512x_buff_descs) + 0x1f); /* @@ -691,12 +691,12 @@ int mpc512x_fec_initialize (bd_t * bis) /* MII-interface related functions */ /********************************************************************/ -int fec512x_miiphy_read (char *devname, uint8 phyAddr, uint8 regAddr, uint16 * retVal) +int fec512x_miiphy_read (char *devname, u8 phyAddr, u8 regAddr, u16 * retVal) { volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; volatile fec512x_t *eth = &im->fec; - uint32 reg; /* convenient holder for the PHY register */ - uint32 phy; /* convenient holder for the PHY */ + u32 reg; /* convenient holder for the PHY register */ + u32 phy; /* convenient holder for the PHY */ int timeout = 0xffff; /* @@ -732,18 +732,18 @@ int fec512x_miiphy_read (char *devname, uint8 phyAddr, uint8 regAddr, uint16 * r /* * it's now safe to read the PHY's register */ - *retVal = (uint16) in_be32(ð->mii_data); + *retVal = (u16) in_be32(ð->mii_data); return 0; } /********************************************************************/ -int fec512x_miiphy_write (char *devname, uint8 phyAddr, uint8 regAddr, uint16 data) +int fec512x_miiphy_write (char *devname, u8 phyAddr, u8 regAddr, u16 data) { volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; volatile fec512x_t *eth = &im->fec; - uint32 reg; /* convenient holder for the PHY register */ - uint32 phy; /* convenient holder for the PHY */ + u32 reg; /* convenient holder for the PHY register */ + u32 phy; /* convenient holder for the PHY */ int timeout = 0xffff; reg = regAddr << FEC_MII_DATA_RA_SHIFT; @@ -776,7 +776,7 @@ int fec512x_miiphy_write (char *devname, uint8 phyAddr, uint8 regAddr, uint16 da } #if (DEBUG & 0x40) -static uint32 local_crc32 (char *string, unsigned int crc_value, int len) +static u32 local_crc32 (char *string, unsigned int crc_value, int len) { int i; char c; diff --git a/drivers/net/mpc512x_fec.h b/drivers/net/mpc512x_fec.h index f24f529a79..a083cca2f8 100644 --- a/drivers/net/mpc512x_fec.h +++ b/drivers/net/mpc512x_fec.h @@ -9,23 +9,18 @@ #define __MPC512X_FEC_H #include -#include - -typedef unsigned long uint32; -typedef unsigned short uint16; -typedef unsigned char uint8; /* Receive & Transmit Buffer Descriptor definitions */ typedef struct BufferDescriptor { - uint16 status; - uint16 dataLength; - uint32 dataPointer; + u16 status; + u16 dataLength; + u32 dataPointer; } FEC_RBD; typedef struct { - uint16 status; - uint16 dataLength; - uint32 dataPointer; + u16 status; + u16 dataLength; + u32 dataPointer; } FEC_TBD; /* private structure */ @@ -46,7 +41,7 @@ typedef enum { #define FEC_BUFFER_SIZE ((FEC_MAX_FRAME_LEN + 0x10) & (~0xf)) typedef struct { - uint8 frame[FEC_BUFFER_SIZE]; + u8 frame[FEC_BUFFER_SIZE]; } mpc512x_frame; typedef struct { @@ -59,10 +54,10 @@ typedef struct { volatile fec512x_t *eth; xceiver_type xcv_type; /* transceiver type */ mpc512x_buff_descs *bdBase; /* BD rings and recv buffer */ - uint16 rbdIndex; /* next receive BD to read */ - uint16 tbdIndex; /* next transmit BD to send */ - uint16 usedTbdIndex; /* next transmit BD to clean */ - uint16 cleanTbdNum; /* the number of available transmit BDs */ + u16 rbdIndex; /* next receive BD to read */ + u16 tbdIndex; /* next transmit BD to send */ + u16 usedTbdIndex; /* next transmit BD to clean */ + u16 cleanTbdNum; /* the number of available transmit BDs */ } mpc512x_fec_priv; /* RBD bits definitions */ diff --git a/include/asm-ppc/immap_512x.h b/include/asm-ppc/immap_512x.h index bd40c04e14..444e028885 100644 --- a/include/asm-ppc/immap_512x.h +++ b/include/asm-ppc/immap_512x.h @@ -25,7 +25,28 @@ #define __IMMAP_512x__ #include +#if defined(CONFIG_E300) +#include +#endif +/* + * System reset offset (PowerPC standard) + */ +#define EXC_OFF_SYS_RESET 0x0100 +#define _START_OFFSET EXC_OFF_SYS_RESET + +#define SPR_5121E 0x80180000 + +/* + * IMMRBAR - Internal Memory Register Base Address + */ +#define CONFIG_DEFAULT_IMMR 0xFF400000 /* Default IMMR base address */ +#define IMMRBAR 0x0000 /* Register offset to immr */ +#define IMMRBAR_BASE_ADDR 0xFFF00000 /* Base address mask */ +#define IMMRBAR_RES ~(IMMRBAR_BASE_ADDR) + + +#ifndef __ASSEMBLY__ typedef struct law512x { u32 bar; /* Base Addr Register */ u32 ar; /* Attributes Register */ @@ -60,6 +81,8 @@ typedef struct sysconf512x { u8 res5[0xf8]; } sysconf512x_t; +#define LAWBAR_BAR 0xFFFFF000 /* Base address mask */ + /* * Watch Dog Timer (WDT) Registers */ @@ -124,6 +147,34 @@ typedef struct reset512x { u8 res1[0xDC]; } reset512x_t; +/* RSR - Reset Status Register */ +#define RSR_SWSR 0x00002000 /* software soft reset */ +#define RSR_SWHR 0x00001000 /* software hard reset */ +#define RSR_JHRS 0x00000200 /* jtag hreset */ +#define RSR_JSRS 0x00000100 /* jtag sreset status */ +#define RSR_CSHR 0x00000010 /* checkstop reset status */ +#define RSR_SWRS 0x00000008 /* software watchdog reset status */ +#define RSR_BMRS 0x00000004 /* bus monitop reset status */ +#define RSR_SRS 0x00000002 /* soft reset status */ +#define RSR_HRS 0x00000001 /* hard reset status */ +#define RSR_RES ~(RSR_SWSR | RSR_SWHR |\ + RSR_JHRS | RSR_JSRS | RSR_CSHR | RSR_SWRS |\ + RSR_BMRS | RSR_SRS | RSR_HRS) + +/* RMR - Reset Mode Register */ +#define RMR_CSRE 0x00000001 /* checkstop reset enable */ +#define RMR_CSRE_SHIFT 0 +#define RMR_RES (~(RMR_CSRE)) + +/* RCR - Reset Control Register */ +#define RCR_SWHR 0x00000002 /* software hard reset */ +#define RCR_SWSR 0x00000001 /* software soft reset */ +#define RCR_RES (~(RCR_SWHR | RCR_SWSR)) + +/* RCER - Reset Control Enable Register */ +#define RCER_CRE 0x00000001 /* software hard reset */ +#define RCER_RES (~(RCER_CRE)) + /* * Clock Module */ @@ -140,6 +191,56 @@ typedef struct clk512x { u8 res1[0xa8]; } clk512x_t; +/* SPMR - System PLL Mode Register */ +#define SPMR_SPMF 0x0F000000 +#define SPMR_SPMF_SHIFT 24 +#define SPMR_CPMF 0x000F0000 +#define SPMR_CPMF_SHIFT 16 + +/* System Clock Control Register 1 commands */ +#define CLOCK_SCCR1_CFG_EN 0x80000000 +#define CLOCK_SCCR1_LPC_EN 0x40000000 +#define CLOCK_SCCR1_NFC_EN 0x20000000 +#define CLOCK_SCCR1_PATA_EN 0x10000000 +#define CLOCK_SCCR1_PSC_EN(cn) (0x08000000 >> (cn)) +#define CLOCK_SCCR1_PSCFIFO_EN 0x00008000 +#define CLOCK_SCCR1_SATA_EN 0x00004000 +#define CLOCK_SCCR1_FEC_EN 0x00002000 +#define CLOCK_SCCR1_TPR_EN 0x00001000 +#define CLOCK_SCCR1_PCI_EN 0x00000800 +#define CLOCK_SCCR1_DDR_EN 0x00000400 + +/* System Clock Control Register 2 commands */ +#define CLOCK_SCCR2_DIU_EN 0x80000000 +#define CLOCK_SCCR2_AXE_EN 0x40000000 +#define CLOCK_SCCR2_MEM_EN 0x20000000 +#define CLOCK_SCCR2_USB2_EN 0x10000000 +#define CLOCK_SCCR2_USB1_EN 0x08000000 +#define CLOCK_SCCR2_I2C_EN 0x04000000 +#define CLOCK_SCCR2_BDLC_EN 0x02000000 +#define CLOCK_SCCR2_SDHC_EN 0x01000000 +#define CLOCK_SCCR2_SPDIF_EN 0x00800000 +#define CLOCK_SCCR2_MBX_BUS_EN 0x00400000 +#define CLOCK_SCCR2_MBX_EN 0x00200000 +#define CLOCK_SCCR2_MBX_3D_EN 0x00100000 +#define CLOCK_SCCR2_IIM_EN 0x00080000 + +/* SCFR1 System Clock Frequency Register 1 */ +#define SCFR1_IPS_DIV 0x3 +#define SCFR1_IPS_DIV_MASK 0x03800000 +#define SCFR1_IPS_DIV_SHIFT 23 + +#define SCFR1_PCI_DIV 0x6 +#define SCFR1_PCI_DIV_MASK 0x00700000 +#define SCFR1_PCI_DIV_SHIFT 20 + +/* SCFR2 System Clock Frequency Register 2 */ +#define SCFR2_SYS_DIV 0xFC000000 +#define SCFR2_SYS_DIV_SHIFT 26 + +/* SPCR - System Priority Configuration Register */ +#define SPCR_TBEN 0x00400000 /* E300 core time base unit enable */ + /* * Power Management Control Module */ @@ -266,6 +367,40 @@ typedef struct pci_outbound_window { u8 res2[4]; } pot512x_t; +/* POTAR - PCI Outbound Translation Address Register */ +#define POTAR_TA_MASK 0x000fffff + +/* POBAR - PCI Outbound Base Address Register */ +#define POBAR_BA_MASK 0x000fffff + +/* POCMR - PCI Outbound Comparision Mask Register */ +#define POCMR_EN 0x80000000 +#define POCMR_IO 0x40000000 /* 0-memory space 1-I/O space */ +#define POCMR_PRE 0x20000000 /* prefetch enable */ +#define POCMR_SBS 0x00100000 /* special byte swap enable */ +#define POCMR_CM_MASK 0x000fffff +#define POCMR_CM_4G 0x00000000 +#define POCMR_CM_2G 0x00080000 +#define POCMR_CM_1G 0x000C0000 +#define POCMR_CM_512M 0x000E0000 +#define POCMR_CM_256M 0x000F0000 +#define POCMR_CM_128M 0x000F8000 +#define POCMR_CM_64M 0x000FC000 +#define POCMR_CM_32M 0x000FE000 +#define POCMR_CM_16M 0x000FF000 +#define POCMR_CM_8M 0x000FF800 +#define POCMR_CM_4M 0x000FFC00 +#define POCMR_CM_2M 0x000FFE00 +#define POCMR_CM_1M 0x000FFF00 +#define POCMR_CM_512K 0x000FFF80 +#define POCMR_CM_256K 0x000FFFC0 +#define POCMR_CM_128K 0x000FFFE0 +#define POCMR_CM_64K 0x000FFFF0 +#define POCMR_CM_32K 0x000FFFF8 +#define POCMR_CM_16K 0x000FFFFC +#define POCMR_CM_8K 0x000FFFFE +#define POCMR_CM_4K 0x000FFFFF + /* * Sequencer */ @@ -315,6 +450,27 @@ typedef struct pcictrl512x { } pcictrl512x_t; +/* PITAR - PCI Inbound Translation Address Register + */ +#define PITAR_TA_MASK 0x000fffff + +/* PIBAR - PCI Inbound Base/Extended Address Register + */ +#define PIBAR_MASK 0xffffffff +#define PIEBAR_EBA_MASK 0x000fffff + +/* PIWAR - PCI Inbound Windows Attributes Register + */ +#define PIWAR_EN 0x80000000 +#define PIWAR_SBS 0x40000000 +#define PIWAR_PF 0x20000000 +#define PIWAR_RTT_MASK 0x000f0000 +#define PIWAR_RTT_NO_SNOOP 0x00040000 +#define PIWAR_RTT_SNOOP 0x00050000 +#define PIWAR_WTT_MASK 0x0000f000 +#define PIWAR_WTT_NO_SNOOP 0x00004000 +#define PIWAR_WTT_SNOOP 0x00005000 + /* * MSCAN */ @@ -355,13 +511,34 @@ typedef struct i2c512x_dev { u8 res0[0x0C]; } i2c512x_dev_t; +/* Number of I2C buses */ +#define I2C_BUS_CNT 3 + typedef struct i2c512x { - i2c512x_dev_t dev[3]; + i2c512x_dev_t dev[I2C_BUS_CNT]; volatile u32 icr; volatile u32 mifr; u8 res0[0x98]; } i2c512x_t; +/* I2Cn control register bits */ +#define I2C_EN 0x80 +#define I2C_IEN 0x40 +#define I2C_STA 0x20 +#define I2C_TX 0x10 +#define I2C_TXAK 0x08 +#define I2C_RSTA 0x04 +#define I2C_INIT_MASK (I2C_EN | I2C_STA | I2C_TX | I2C_RSTA) + +/* I2Cn status register bits */ +#define I2C_CF 0x80 +#define I2C_AAS 0x40 +#define I2C_BB 0x20 +#define I2C_AL 0x10 +#define I2C_SRW 0x04 +#define I2C_IF 0x02 +#define I2C_RXAK 0x01 + /* * AXE */ @@ -653,6 +830,27 @@ typedef struct ioctrl512x { u8 reserved[0x0cfc]; /* fill to 4096 bytes size */ } ioctrl512x_t; +/* Indexes in regs array */ +/* Set for DDR */ +#define IOCTRL_MUX_DDR 0x00000036 + +/* IO pin fields */ +#define IO_PIN_FMUX(v) ((v) << 7) /* pin function */ +#define IO_PIN_HOLD(v) ((v) << 5) /* hold time, pci only */ +#define IO_PIN_PUD(v) ((v) << 4) /* if PUE, 0=pull-down, 1=pull-up */ +#define IO_PIN_PUE(v) ((v) << 3) /* pull up/down enable */ +#define IO_PIN_ST(v) ((v) << 2) /* schmitt trigger */ +#define IO_PIN_DS(v) ((v)) /* slew rate */ + +typedef struct iopin_t { + int p_offset; /* offset from IOCTL_MEM_OFFSET */ + int nr_pins; /* number of pins to set this way */ + int bit_or; /* or in the value instead of overwrite */ + u_long val; /* value to write or or */ +}iopin_t; + +void iopin_initialize(iopin_t *,int); + /* * IIM */ @@ -834,6 +1032,51 @@ typedef struct psc512x { #define rfdata_32 rfdata_buffer.buffer_32 } psc512x_t; +/* PSC FIFO Command values */ +#define PSC_FIFO_RESET_SLICE 0x80 +#define PSC_FIFO_ENABLE_SLICE 0x01 + +/* PSC FIFO Controller Command values */ +#define FIFOC_ENABLE_CLOCK_GATE 0x01 +#define FIFOC_DISABLE_CLOCK_GATE 0x00 + +/* PSC FIFO status */ +#define PSC_FIFO_EMPTY 0x01 + +/* PSC Command values */ +#define PSC_RX_ENABLE 0x01 +#define PSC_RX_DISABLE 0x02 +#define PSC_TX_ENABLE 0x04 +#define PSC_TX_DISABLE 0x08 +#define PSC_SEL_MODE_REG_1 0x10 +#define PSC_RST_RX 0x20 +#define PSC_RST_TX 0x30 +#define PSC_RST_ERR_STAT 0x40 +#define PSC_RST_BRK_CHG_INT 0x50 +#define PSC_START_BRK 0x60 +#define PSC_STOP_BRK 0x70 + +/* PSC status register bits */ +#define PSC_SR_CDE 0x0080 +#define PSC_SR_TXEMP 0x0800 +#define PSC_SR_OE 0x1000 +#define PSC_SR_PE 0x2000 +#define PSC_SR_FE 0x4000 +#define PSC_SR_RB 0x8000 + +/* PSC mode fields */ +#define PSC_MODE_5_BITS 0x00 +#define PSC_MODE_6_BITS 0x01 +#define PSC_MODE_7_BITS 0x02 +#define PSC_MODE_8_BITS 0x03 +#define PSC_MODE_PAREVEN 0x00 +#define PSC_MODE_PARODD 0x04 +#define PSC_MODE_PARFORCE 0x08 +#define PSC_MODE_PARNONE 0x10 +#define PSC_MODE_ENTIMEOUT 0x20 +#define PSC_MODE_RXRTS 0x80 +#define PSC_MODE_1_STOPBIT 0x07 + /* * FIFOC */ @@ -846,6 +1089,76 @@ typedef struct fifoc512x { u8 fixme[0xEC]; } fifoc512x_t; +/* + * Centralized FIFO Controller has internal memory for all 12 PSCs FIFOs + * + * NOTE: individual PSC units are free to use whatever area (and size) of the + * FIFOC internal memory, so make sure memory areas for FIFO slices used by + * different PSCs do not overlap! + * + * Overall size of FIFOC memory is not documented in the MPC5121e RM, but + * tests indicate that it is 1024 words total. + */ +#define FIFOC_PSC0_TX_SIZE 0x0 /* number of 4-byte words for FIFO slice */ +#define FIFOC_PSC0_TX_ADDR 0x0 +#define FIFOC_PSC0_RX_SIZE 0x0 +#define FIFOC_PSC0_RX_ADDR 0x0 + +#define FIFOC_PSC1_TX_SIZE 0x0 +#define FIFOC_PSC1_TX_ADDR 0x0 +#define FIFOC_PSC1_RX_SIZE 0x0 +#define FIFOC_PSC1_RX_ADDR 0x0 + +#define FIFOC_PSC2_TX_SIZE 0x0 +#define FIFOC_PSC2_TX_ADDR 0x0 +#define FIFOC_PSC2_RX_SIZE 0x0 +#define FIFOC_PSC2_RX_ADDR 0x0 + +#define FIFOC_PSC3_TX_SIZE 0x04 +#define FIFOC_PSC3_TX_ADDR 0x0 +#define FIFOC_PSC3_RX_SIZE 0x04 +#define FIFOC_PSC3_RX_ADDR 0x10 + +#define FIFOC_PSC4_TX_SIZE 0x0 +#define FIFOC_PSC4_TX_ADDR 0x0 +#define FIFOC_PSC4_RX_SIZE 0x0 +#define FIFOC_PSC4_RX_ADDR 0x0 + +#define FIFOC_PSC5_TX_SIZE 0x0 +#define FIFOC_PSC5_TX_ADDR 0x0 +#define FIFOC_PSC5_RX_SIZE 0x0 +#define FIFOC_PSC5_RX_ADDR 0x0 + +#define FIFOC_PSC6_TX_SIZE 0x0 +#define FIFOC_PSC6_TX_ADDR 0x0 +#define FIFOC_PSC6_RX_SIZE 0x0 +#define FIFOC_PSC6_RX_ADDR 0x0 + +#define FIFOC_PSC7_TX_SIZE 0x0 +#define FIFOC_PSC7_TX_ADDR 0x0 +#define FIFOC_PSC7_RX_SIZE 0x0 +#define FIFOC_PSC7_RX_ADDR 0x0 + +#define FIFOC_PSC8_TX_SIZE 0x0 +#define FIFOC_PSC8_TX_ADDR 0x0 +#define FIFOC_PSC8_RX_SIZE 0x0 +#define FIFOC_PSC8_RX_ADDR 0x0 + +#define FIFOC_PSC9_TX_SIZE 0x0 +#define FIFOC_PSC9_TX_ADDR 0x0 +#define FIFOC_PSC9_RX_SIZE 0x0 +#define FIFOC_PSC9_RX_ADDR 0x0 + +#define FIFOC_PSC10_TX_SIZE 0x0 +#define FIFOC_PSC10_TX_ADDR 0x0 +#define FIFOC_PSC10_RX_SIZE 0x0 +#define FIFOC_PSC10_RX_ADDR 0x0 + +#define FIFOC_PSC11_TX_SIZE 0x0 +#define FIFOC_PSC11_TX_ADDR 0x0 +#define FIFOC_PSC11_RX_SIZE 0x0 +#define FIFOC_PSC11_RX_ADDR 0x0 + /* * SATA */ @@ -903,4 +1216,13 @@ typedef struct immap { sata512x_t sata; /* Serial ATA */ u8 res13[0xde000]; } immap_t; + +/* provide interface to get PATA base address */ +static inline u32 get_pata_base (void) +{ + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; + return (u32)(&im->pata); +} +#endif /* __ASSEMBLY__ */ + #endif /* __IMMAP_512x__ */ diff --git a/include/common.h b/include/common.h index df0f5a01e1..4c00491685 100644 --- a/include/common.h +++ b/include/common.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2007 + * (C) Copyright 2000-2009 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -66,7 +66,6 @@ typedef volatile unsigned char vu_char; #elif defined(CONFIG_MPC5xxx) #include #elif defined(CONFIG_MPC512X) -#include #include #elif defined(CONFIG_MPC8220) #include diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h index 9e3b0b7317..dff7f1a4f1 100644 --- a/include/configs/mpc5121ads.h +++ b/include/configs/mpc5121ads.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007, 2008 DENX Software Engineering + * (C) Copyright 2007-2009 DENX Software Engineering * * See file CREDITS for list of people who contributed to this * project. @@ -519,7 +519,7 @@ #define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 1 drive per IDE bus */ #define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 -#define CONFIG_SYS_ATA_BASE_ADDR MPC512X_PATA +#define CONFIG_SYS_ATA_BASE_ADDR get_pata_base() /* Offset for data I/O RefMan MPC5121EE Table 28-10 */ #define CONFIG_SYS_ATA_DATA_OFFSET (0x00A0) @@ -533,7 +533,7 @@ /* Interval between registers */ #define CONFIG_SYS_ATA_STRIDE 4 -#define ATA_BASE_ADDR MPC512X_PATA +#define ATA_BASE_ADDR get_pata_base() /* * Control register bit definitions diff --git a/include/mpc512x.h b/include/mpc512x.h deleted file mode 100644 index 0f022939da..0000000000 --- a/include/mpc512x.h +++ /dev/null @@ -1,702 +0,0 @@ -/* - * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. - * (C) Copyright 2007 DENX Software Engineering - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * Derived from the MPC83xx header. - */ - -#ifndef __MPC512X_H__ -#define __MPC512X_H__ - -#include -#if defined(CONFIG_E300) -#include -#endif - -/* System reset offset (PowerPC standard) - */ -#define EXC_OFF_SYS_RESET 0x0100 -#define _START_OFFSET EXC_OFF_SYS_RESET - - -/* IMMRBAR - Internal Memory Register Base Address - */ -#define CONFIG_DEFAULT_IMMR 0xFF400000 /* Default IMMR base address */ -#define IMMRBAR 0x0000 /* Register offset to immr */ -#define IMMRBAR_BASE_ADDR 0xFFF00000 /* Base address mask */ -#define IMMRBAR_RES ~(IMMRBAR_BASE_ADDR) - -/* LAWBAR - Local Access Window Base Address Register - */ -#define LPBAW 0x0020 /* Register offset to immr */ -#define LPCS0AW 0x0024 -#define LPCS1AW 0x0028 -#define LPCS2AW 0x002C -#define LPCS3AW 0x0030 -#define LPCS4AW 0x0034 -#define LPCS5AW 0x0038 -#define LPCS6AW 0x003C -#define LPCA7AW 0x0040 -#define SRAMBAR 0x00C4 -#define LAWBAR_BAR 0xFFFFF000 /* Base address mask */ - -#define LPC_OFFSET 0x10000 - -#define CS0_CONFIG 0x00000 -#define CS1_CONFIG 0x00004 -#define CS2_CONFIG 0x00008 -#define CS3_CONFIG 0x0000C -#define CS4_CONFIG 0x00010 -#define CS5_CONFIG 0x00014 -#define CS6_CONFIG 0x00018 -#define CS7_CONFIG 0x0001C -#define CS_ALE_TIMING_CONFIG 0x00034 - -#define CS_CTRL 0x00020 -#define CS_CTRL_ME 0x01000000 /* CS Master Enable bit */ -#define CS_CTRL_IE 0x08000000 /* CS Interrupt Enable bit */ - -/* SPRIDR - System Part and Revision ID Register - */ -#define SPRIDR_PARTID 0xFFFF0000 /* Part Identification */ -#define SPRIDR_REVID 0x0000FFFF /* Revision Identification */ - -#define SPR_5121E 0x80180000 - -/* SPCR - System Priority Configuration Register - */ -#define SPCR_PCIHPE 0x10000000 /* PCI Highest Priority Enable */ -#define SPCR_PCIHPE_SHIFT (31-3) -#define SPCR_PCIPR 0x03000000 /* PCI bridge system bus request priority */ -#define SPCR_PCIPR_SHIFT (31-7) -#define SPCR_TBEN 0x00400000 /* E300 PowerPC core time base unit enable */ -#define SPCR_TBEN_SHIFT (31-9) -#define SPCR_COREPR 0x00300000 /* E300 PowerPC Core system bus request priority */ -#define SPCR_COREPR_SHIFT (31-11) - -/* SWCRR - System Watchdog Control Register - */ -#define SWCRR 0x0904 /* Register offset to immr */ -#define SWCRR_SWTC 0xFFFF0000 /* Software Watchdog Time Count */ -#define SWCRR_SWEN 0x00000004 /* Watchdog Enable bit */ -#define SWCRR_SWRI 0x00000002 /* Software Watchdog Reset/Interrupt Select bit */ -#define SWCRR_SWPR 0x00000001 /* Software Watchdog Counter Prescale bit */ -#define SWCRR_RES ~(SWCRR_SWTC | SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR) - -/* SWCNR - System Watchdog Counter Register - */ -#define SWCNR 0x0908 /* Register offset to immr */ -#define SWCNR_SWCN 0x0000FFFF /* Software Watchdog Count mask */ -#define SWCNR_RES ~(SWCNR_SWCN) - -/* SWSRR - System Watchdog Service Register - */ -#define SWSRR 0x090E /* Register offset to immr */ - -/* ACR - Arbiter Configuration Register - */ -#define ACR_COREDIS 0x10000000 /* Core disable */ -#define ACR_COREDIS_SHIFT (31-7) -#define ACR_PIPE_DEP 0x00070000 /* Pipeline depth */ -#define ACR_PIPE_DEP_SHIFT (31-15) -#define ACR_PCI_RPTCNT 0x00007000 /* PCI repeat count */ -#define ACR_PCI_RPTCNT_SHIFT (31-19) -#define ACR_RPTCNT 0x00000700 /* Repeat count */ -#define ACR_RPTCNT_SHIFT (31-23) -#define ACR_APARK 0x00000030 /* Address parking */ -#define ACR_APARK_SHIFT (31-27) -#define ACR_PARKM 0x0000000F /* Parking master */ -#define ACR_PARKM_SHIFT (31-31) - -/* ATR - Arbiter Timers Register - */ -#define ATR_DTO 0x00FF0000 /* Data time out */ -#define ATR_ATO 0x000000FF /* Address time out */ - -/* AER - Arbiter Event Register - */ -#define AER_ETEA 0x00000020 /* Transfer error */ -#define AER_RES 0x00000010 /* Reserved transfer type */ -#define AER_ECW 0x00000008 /* External control word transfer type */ -#define AER_AO 0x00000004 /* Address Only transfer type */ -#define AER_DTO 0x00000002 /* Data time out */ -#define AER_ATO 0x00000001 /* Address time out */ - -/* AEATR - Arbiter Event Address Register - */ -#define AEATR_EVENT 0x07000000 /* Event type */ -#define AEATR_MSTR_ID 0x001F0000 /* Master Id */ -#define AEATR_TBST 0x00000800 /* Transfer burst */ -#define AEATR_TSIZE 0x00000700 /* Transfer Size */ -#define AEATR_TTYPE 0x0000001F /* Transfer Type */ - -/* RSR - Reset Status Register - */ -#define RSR_SWSR 0x00002000 /* software soft reset */ -#define RSR_SWSR_SHIFT 13 -#define RSR_SWHR 0x00001000 /* software hard reset */ -#define RSR_SWHR_SHIFT 12 -#define RSR_JHRS 0x00000200 /* jtag hreset */ -#define RSR_JHRS_SHIFT 9 -#define RSR_JSRS 0x00000100 /* jtag sreset status */ -#define RSR_JSRS_SHIFT 8 -#define RSR_CSHR 0x00000010 /* checkstop reset status */ -#define RSR_CSHR_SHIFT 4 -#define RSR_SWRS 0x00000008 /* software watchdog reset status */ -#define RSR_SWRS_SHIFT 3 -#define RSR_BMRS 0x00000004 /* bus monitop reset status */ -#define RSR_BMRS_SHIFT 2 -#define RSR_SRS 0x00000002 /* soft reset status */ -#define RSR_SRS_SHIFT 1 -#define RSR_HRS 0x00000001 /* hard reset status */ -#define RSR_HRS_SHIFT 0 -#define RSR_RES ~(RSR_SWSR | RSR_SWHR |\ - RSR_JHRS | RSR_JSRS | RSR_CSHR | RSR_SWRS |\ - RSR_BMRS | RSR_SRS | RSR_HRS) -/* RMR - Reset Mode Register - */ -#define RMR_CSRE 0x00000001 /* checkstop reset enable */ -#define RMR_CSRE_SHIFT 0 -#define RMR_RES ~(RMR_CSRE) - -/* RCR - Reset Control Register - */ -#define RCR_SWHR 0x00000002 /* software hard reset */ -#define RCR_SWSR 0x00000001 /* software soft reset */ -#define RCR_RES ~(RCR_SWHR | RCR_SWSR) - -/* RCER - Reset Control Enable Register - */ -#define RCER_CRE 0x00000001 /* software hard reset */ -#define RCER_RES ~(RCER_CRE) - -/* SPMR - System PLL Mode Register - */ -#define SPMR_SPMF 0x0F000000 -#define SPMR_SPMF_SHIFT 24 -#define SPMR_CPMF 0x000F0000 -#define SPMR_CPMF_SHIFT 16 - -/* SCFR1 System Clock Frequency Register 1 - */ -#define SCFR1_IPS_DIV 0x3 -#define SCFR1_IPS_DIV_MASK 0x03800000 -#define SCFR1_IPS_DIV_SHIFT 23 - -#define SCFR1_PCI_DIV 0x6 -#define SCFR1_PCI_DIV_MASK 0x00700000 -#define SCFR1_PCI_DIV_SHIFT 20 - -/* SCFR2 System Clock Frequency Register 2 - */ -#define SCFR2_SYS_DIV 0xFC000000 -#define SCFR2_SYS_DIV_SHIFT 26 - -/* SCCR - System Clock Control Registers - */ - -/* System Clock Control Register 1 commands */ -#define CLOCK_SCCR1_CFG_EN 0x80000000 -#define CLOCK_SCCR1_LPC_EN 0x40000000 -#define CLOCK_SCCR1_NFC_EN 0x20000000 -#define CLOCK_SCCR1_PATA_EN 0x10000000 -#define CLOCK_SCCR1_PSC_EN(cn) (0x08000000 >> (cn)) -#define CLOCK_SCCR1_PSCFIFO_EN 0x00008000 -#define CLOCK_SCCR1_SATA_EN 0x00004000 -#define CLOCK_SCCR1_FEC_EN 0x00002000 -#define CLOCK_SCCR1_TPR_EN 0x00001000 -#define CLOCK_SCCR1_PCI_EN 0x00000800 -#define CLOCK_SCCR1_DDR_EN 0x00000400 - -/* System Clock Control Register 2 commands */ -#define CLOCK_SCCR2_DIU_EN 0x80000000 -#define CLOCK_SCCR2_AXE_EN 0x40000000 -#define CLOCK_SCCR2_MEM_EN 0x20000000 -#define CLOCK_SCCR2_USB2_EN 0x10000000 -#define CLOCK_SCCR2_USB1_EN 0x08000000 -#define CLOCK_SCCR2_I2C_EN 0x04000000 -#define CLOCK_SCCR2_BDLC_EN 0x02000000 -#define CLOCK_SCCR2_SDHC_EN 0x01000000 -#define CLOCK_SCCR2_SPDIF_EN 0x00800000 -#define CLOCK_SCCR2_MBX_BUS_EN 0x00400000 -#define CLOCK_SCCR2_MBX_EN 0x00200000 -#define CLOCK_SCCR2_MBX_3D_EN 0x00100000 -#define CLOCK_SCCR2_IIM_EN 0x00080000 - -/* PSC FIFO Command values */ -#define PSC_FIFO_RESET_SLICE 0x80 -#define PSC_FIFO_ENABLE_SLICE 0x01 - -/* PSC FIFO Controller Command values */ -#define FIFOC_ENABLE_CLOCK_GATE 0x01 -#define FIFOC_DISABLE_CLOCK_GATE 0x00 - -/* PSC FIFO status */ -#define PSC_FIFO_EMPTY 0x01 - -/* PSC Command values */ -#define PSC_RX_ENABLE 0x01 -#define PSC_RX_DISABLE 0x02 -#define PSC_TX_ENABLE 0x04 -#define PSC_TX_DISABLE 0x08 -#define PSC_SEL_MODE_REG_1 0x10 -#define PSC_RST_RX 0x20 -#define PSC_RST_TX 0x30 -#define PSC_RST_ERR_STAT 0x40 -#define PSC_RST_BRK_CHG_INT 0x50 -#define PSC_START_BRK 0x60 -#define PSC_STOP_BRK 0x70 - -/* PSC status register bits */ -#define PSC_SR_CDE 0x0080 -#define PSC_SR_TXEMP 0x0800 -#define PSC_SR_OE 0x1000 -#define PSC_SR_PE 0x2000 -#define PSC_SR_FE 0x4000 -#define PSC_SR_RB 0x8000 - -/* PSC mode fields */ -#define PSC_MODE_5_BITS 0x00 -#define PSC_MODE_6_BITS 0x01 -#define PSC_MODE_7_BITS 0x02 -#define PSC_MODE_8_BITS 0x03 -#define PSC_MODE_PAREVEN 0x00 -#define PSC_MODE_PARODD 0x04 -#define PSC_MODE_PARFORCE 0x08 -#define PSC_MODE_PARNONE 0x10 -#define PSC_MODE_ENTIMEOUT 0x20 -#define PSC_MODE_RXRTS 0x80 -#define PSC_MODE_1_STOPBIT 0x07 - -/* - * Centralized FIFO Controller has internal memory for all 12 PSCs FIFOs - * - * NOTE: individual PSC units are free to use whatever area (and size) of the - * FIFOC internal memory, so make sure memory areas for FIFO slices used by - * different PSCs do not overlap! - * - * Overall size of FIFOC memory is not documented in the MPC5121e RM, but - * tests indicate that it is 1024 words total. - */ -#define FIFOC_PSC0_TX_SIZE 0x0 /* number of 4-byte words for FIFO slice */ -#define FIFOC_PSC0_TX_ADDR 0x0 -#define FIFOC_PSC0_RX_SIZE 0x0 -#define FIFOC_PSC0_RX_ADDR 0x0 - -#define FIFOC_PSC1_TX_SIZE 0x0 -#define FIFOC_PSC1_TX_ADDR 0x0 -#define FIFOC_PSC1_RX_SIZE 0x0 -#define FIFOC_PSC1_RX_ADDR 0x0 - -#define FIFOC_PSC2_TX_SIZE 0x0 -#define FIFOC_PSC2_TX_ADDR 0x0 -#define FIFOC_PSC2_RX_SIZE 0x0 -#define FIFOC_PSC2_RX_ADDR 0x0 - -#define FIFOC_PSC3_TX_SIZE 0x04 -#define FIFOC_PSC3_TX_ADDR 0x0 -#define FIFOC_PSC3_RX_SIZE 0x04 -#define FIFOC_PSC3_RX_ADDR 0x10 - -#define FIFOC_PSC4_TX_SIZE 0x0 -#define FIFOC_PSC4_TX_ADDR 0x0 -#define FIFOC_PSC4_RX_SIZE 0x0 -#define FIFOC_PSC4_RX_ADDR 0x0 - -#define FIFOC_PSC5_TX_SIZE 0x0 -#define FIFOC_PSC5_TX_ADDR 0x0 -#define FIFOC_PSC5_RX_SIZE 0x0 -#define FIFOC_PSC5_RX_ADDR 0x0 - -#define FIFOC_PSC6_TX_SIZE 0x0 -#define FIFOC_PSC6_TX_ADDR 0x0 -#define FIFOC_PSC6_RX_SIZE 0x0 -#define FIFOC_PSC6_RX_ADDR 0x0 - -#define FIFOC_PSC7_TX_SIZE 0x0 -#define FIFOC_PSC7_TX_ADDR 0x0 -#define FIFOC_PSC7_RX_SIZE 0x0 -#define FIFOC_PSC7_RX_ADDR 0x0 - -#define FIFOC_PSC8_TX_SIZE 0x0 -#define FIFOC_PSC8_TX_ADDR 0x0 -#define FIFOC_PSC8_RX_SIZE 0x0 -#define FIFOC_PSC8_RX_ADDR 0x0 - -#define FIFOC_PSC9_TX_SIZE 0x0 -#define FIFOC_PSC9_TX_ADDR 0x0 -#define FIFOC_PSC9_RX_SIZE 0x0 -#define FIFOC_PSC9_RX_ADDR 0x0 - -#define FIFOC_PSC10_TX_SIZE 0x0 -#define FIFOC_PSC10_TX_ADDR 0x0 -#define FIFOC_PSC10_RX_SIZE 0x0 -#define FIFOC_PSC10_RX_ADDR 0x0 - -#define FIFOC_PSC11_TX_SIZE 0x0 -#define FIFOC_PSC11_TX_ADDR 0x0 -#define FIFOC_PSC11_RX_SIZE 0x0 -#define FIFOC_PSC11_RX_ADDR 0x0 - -/* IO Control Register - */ -#define IOCTL_MEM 0x000 -#define IOCTL_GP 0x004 -#define IOCTL_LPC_CLK 0x008 -#define IOCTL_LPC_OE 0x00C -#define IOCTL_LPC_RWB 0x010 -#define IOCTL_LPC_ACK 0x014 -#define IOCTL_LPC_CS0 0x018 -#define IOCTL_NFC_CE0 0x01C -#define IOCTL_LPC_CS1 0x020 -#define IOCTL_LPC_CS2 0x024 -#define IOCTL_LPC_AX03 0x028 -#define IOCTL_EMB_AX02 0x02C -#define IOCTL_EMB_AX01 0x030 -#define IOCTL_EMB_AX00 0x034 -#define IOCTL_EMB_AD31 0x038 -#define IOCTL_EMB_AD30 0x03C -#define IOCTL_EMB_AD29 0x040 -#define IOCTL_EMB_AD28 0x044 -#define IOCTL_EMB_AD27 0x048 -#define IOCTL_EMB_AD26 0x04C -#define IOCTL_EMB_AD25 0x050 -#define IOCTL_EMB_AD24 0x054 -#define IOCTL_EMB_AD23 0x058 -#define IOCTL_EMB_AD22 0x05C -#define IOCTL_EMB_AD21 0x060 -#define IOCTL_EMB_AD20 0x064 -#define IOCTL_EMB_AD19 0x068 -#define IOCTL_EMB_AD18 0x06C -#define IOCTL_EMB_AD17 0x070 -#define IOCTL_EMB_AD16 0x074 -#define IOCTL_EMB_AD15 0x078 -#define IOCTL_EMB_AD14 0x07C -#define IOCTL_EMB_AD13 0x080 -#define IOCTL_EMB_AD12 0x084 -#define IOCTL_EMB_AD11 0x088 -#define IOCTL_EMB_AD10 0x08C -#define IOCTL_EMB_AD09 0x090 -#define IOCTL_EMB_AD08 0x094 -#define IOCTL_EMB_AD07 0x098 -#define IOCTL_EMB_AD06 0x09C -#define IOCTL_EMB_AD05 0x0A0 -#define IOCTL_EMB_AD04 0x0A4 -#define IOCTL_EMB_AD03 0x0A8 -#define IOCTL_EMB_AD02 0x0AC -#define IOCTL_EMB_AD01 0x0B0 -#define IOCTL_EMB_AD00 0x0B4 -#define IOCTL_PATA_CE1 0x0B8 -#define IOCTL_PATA_CE2 0x0BC -#define IOCTL_PATA_ISOLATE 0x0C0 -#define IOCTL_PATA_IOR 0x0C4 -#define IOCTL_PATA_IOW 0x0C8 -#define IOCTL_PATA_IOCHRDY 0x0CC -#define IOCTL_PATA_INTRQ 0x0D0 -#define IOCTL_PATA_DRQ 0x0D4 -#define IOCTL_PATA_DACK 0x0D8 -#define IOCTL_NFC_WP 0x0DC -#define IOCTL_NFC_RB 0x0E0 -#define IOCTL_NFC_ALE 0x0E4 -#define IOCTL_NFC_CLE 0x0E8 -#define IOCTL_NFC_WE 0x0EC -#define IOCTL_NFC_RE 0x0F0 -#define IOCTL_PCI_AD31 0x0F4 -#define IOCTL_PCI_AD30 0x0F8 -#define IOCTL_PCI_AD29 0x0FC -#define IOCTL_PCI_AD28 0x100 -#define IOCTL_PCI_AD27 0x104 -#define IOCTL_PCI_AD26 0x108 -#define IOCTL_PCI_AD25 0x10C -#define IOCTL_PCI_AD24 0x110 -#define IOCTL_PCI_AD23 0x114 -#define IOCTL_PCI_AD22 0x118 -#define IOCTL_PCI_AD21 0x11C -#define IOCTL_PCI_AD20 0x120 -#define IOCTL_PCI_AD19 0x124 -#define IOCTL_PCI_AD18 0x128 -#define IOCTL_PCI_AD17 0x12C -#define IOCTL_PCI_AD16 0x130 -#define IOCTL_PCI_AD15 0x134 -#define IOCTL_PCI_AD14 0x138 -#define IOCTL_PCI_AD13 0x13C -#define IOCTL_PCI_AD12 0x140 -#define IOCTL_PCI_AD11 0x144 -#define IOCTL_PCI_AD10 0x148 -#define IOCTL_PCI_AD09 0x14C -#define IOCTL_PCI_AD08 0x150 -#define IOCTL_PCI_AD07 0x154 -#define IOCTL_PCI_AD06 0x158 -#define IOCTL_PCI_AD05 0x15C -#define IOCTL_PCI_AD04 0x160 -#define IOCTL_PCI_AD03 0x164 -#define IOCTL_PCI_AD02 0x168 -#define IOCTL_PCI_AD01 0x16C -#define IOCTL_PCI_AD00 0x170 -#define IOCTL_PCI_CBE0 0x174 -#define IOCTL_PCI_CBE1 0x178 -#define IOCTL_PCI_CBE2 0x17C -#define IOCTL_PCI_CBE3 0x180 -#define IOCTL_PCI_GNT2 0x184 -#define IOCTL_PCI_REQ2 0x188 -#define IOCTL_PCI_GNT1 0x18C -#define IOCTL_PCI_REQ1 0x190 -#define IOCTL_PCI_GNT0 0x194 -#define IOCTL_PCI_REQ0 0x198 -#define IOCTL_PCI_INTA 0x19C -#define IOCTL_PCI_CLK 0x1A0 -#define IOCTL_PCI_RST_OUT 0x1A4 -#define IOCTL_PCI_FRAME 0x1A8 -#define IOCTL_PCI_IDSEL 0x1AC -#define IOCTL_PCI_DEVSEL 0x1B0 -#define IOCTL_PCI_IRDY 0x1B4 -#define IOCTL_PCI_TRDY 0x1B8 -#define IOCTL_PCI_STOP 0x1BC -#define IOCTL_PCI_PAR 0x1C0 -#define IOCTL_PCI_PERR 0x1C4 -#define IOCTL_PCI_SERR 0x1C8 -#define IOCTL_SPDIF_TXCLK 0x1CC -#define IOCTL_SPDIF_TX 0x1D0 -#define IOCTL_SPDIF_RX 0x1D4 -#define IOCTL_I2C0_SCL 0x1D8 -#define IOCTL_I2C0_SDA 0x1DC -#define IOCTL_I2C1_SCL 0x1E0 -#define IOCTL_I2C1_SDA 0x1E4 -#define IOCTL_I2C2_SCL 0x1E8 -#define IOCTL_I2C2_SDA 0x1EC -#define IOCTL_IRQ0 0x1F0 -#define IOCTL_IRQ1 0x1F4 -#define IOCTL_CAN1_TX 0x1F8 -#define IOCTL_CAN2_TX 0x1FC -#define IOCTL_J1850_TX 0x200 -#define IOCTL_J1850_RX 0x204 -#define IOCTL_PSC_MCLK_IN 0x208 -#define IOCTL_PSC0_0 0x20C -#define IOCTL_PSC0_1 0x210 -#define IOCTL_PSC0_2 0x214 -#define IOCTL_PSC0_3 0x218 -#define IOCTL_PSC0_4 0x21C -#define IOCTL_PSC1_0 0x220 -#define IOCTL_PSC1_1 0x224 -#define IOCTL_PSC1_2 0x228 -#define IOCTL_PSC1_3 0x22C -#define IOCTL_PSC1_4 0x230 -#define IOCTL_PSC2_0 0x234 -#define IOCTL_PSC2_1 0x238 -#define IOCTL_PSC2_2 0x23C -#define IOCTL_PSC2_3 0x240 -#define IOCTL_PSC2_4 0x244 -#define IOCTL_PSC3_0 0x248 -#define IOCTL_PSC3_1 0x24C -#define IOCTL_PSC3_2 0x250 -#define IOCTL_PSC3_3 0x254 -#define IOCTL_PSC3_4 0x258 -#define IOCTL_PSC4_0 0x25C -#define IOCTL_PSC4_1 0x260 -#define IOCTL_PSC4_2 0x264 -#define IOCTL_PSC4_3 0x268 -#define IOCTL_PSC4_4 0x26C -#define IOCTL_PSC5_0 0x270 -#define IOCTL_PSC5_1 0x274 -#define IOCTL_PSC5_2 0x278 -#define IOCTL_PSC5_3 0x27C -#define IOCTL_PSC5_4 0x280 -#define IOCTL_PSC6_0 0x284 -#define IOCTL_PSC6_1 0x288 -#define IOCTL_PSC6_2 0x28C -#define IOCTL_PSC6_3 0x290 -#define IOCTL_PSC6_4 0x294 -#define IOCTL_PSC7_0 0x298 -#define IOCTL_PSC7_1 0x29C -#define IOCTL_PSC7_2 0x2A0 -#define IOCTL_PSC7_3 0x2A4 -#define IOCTL_PSC7_4 0x2A8 -#define IOCTL_PSC8_0 0x2AC -#define IOCTL_PSC8_1 0x2B0 -#define IOCTL_PSC8_2 0x2B4 -#define IOCTL_PSC8_3 0x2B8 -#define IOCTL_PSC8_4 0x2BC -#define IOCTL_PSC9_0 0x2C0 -#define IOCTL_PSC9_1 0x2C4 -#define IOCTL_PSC9_2 0x2C8 -#define IOCTL_PSC9_3 0x2CC -#define IOCTL_PSC9_4 0x2D0 -#define IOCTL_PSC10_0 0x2D4 -#define IOCTL_PSC10_1 0x2D8 -#define IOCTL_PSC10_2 0x2DC -#define IOCTL_PSC10_3 0x2E0 -#define IOCTL_PSC10_4 0x2E4 -#define IOCTL_PSC11_0 0x2E8 -#define IOCTL_PSC11_1 0x2EC -#define IOCTL_PSC11_2 0x2F0 -#define IOCTL_PSC11_3 0x2F4 -#define IOCTL_PSC11_4 0x2F8 -#define IOCTL_HRESET 0x2FC -#define IOCTL_SRESET 0x300 -#define IOCTL_CKSTP_OUT 0x304 -#define IOCTL_USB2_VBUS_PWR_FAULT 0x308 -#define IOCTL_USB2_VBUS_PWR_SELECT 0x30C -#define IOCTL_USB2_PHY_DRVV_BUS 0x310 - -#ifndef __ASSEMBLY__ - - -/* IO pin fields */ -#define IO_PIN_FMUX(v) ((v) << 7) /* pin function */ -#define IO_PIN_HOLD(v) ((v) << 5) /* hold time, pci only */ -#define IO_PIN_PUD(v) ((v) << 4) /* if PUE, 0=pull-down, 1=pull-up */ -#define IO_PIN_PUE(v) ((v) << 3) /* pull up/down enable */ -#define IO_PIN_ST(v) ((v) << 2) /* schmitt trigger */ -#define IO_PIN_DS(v) ((v)) /* slew rate */ - -typedef struct iopin_t { - int p_offset; /* offset from IOCTL_MEM_OFFSET */ - int nr_pins; /* number of pins to set this way */ - int bit_or; /* or in the value instead of overwrite */ - u_long val; /* value to write or or */ -}iopin_t; - -void iopin_initialize(iopin_t *,int); -#endif - -/* Indexes in regs array */ -/* Set for DDR */ -#define IOCTRL_MUX_DDR 0x00000036 - - /* Register Offset Base */ -#define MPC512X_FEC (CONFIG_SYS_IMMR + 0x02800) -#define MPC512X_PATA (CONFIG_SYS_IMMR + 0x10200) - -/* IIM control */ -#define IIM_SET_UA(bk, f) ((bk << 3) | (f >> 5)) -#define IIM_SET_LA(f, bit) (((f & 0x0000001f) << 3) | bit) -#define IIM_STAT_BUSY 0x00000080 -#define IIM_STAT_PRGD 0x00000002 -#define IIM_STAT_SNSD 0x00000001 -#define IIM_ERR_WPE 0x00000040 -#define IIM_ERR_OPE 0x00000020 -#define IIM_ERR_RPE 0x00000010 -#define IIM_ERR_WLRE 0x00000008 -#define IIM_ERR_SNSE 0x00000004 -#define IIM_ERR_PARITYE 0x00000002 -#define IIM_PRG_P_SET 0x000000aa -#define IIM_PRG_P_UNSET 0 -#define IIM_FCTL_PROG_PULSE 0x00000020 -#define IIM_FCTL_PROG 0x00000001 -#define IIM_FCTL_ESNS_N 0x00000008 -#define IIM_FBAC_FBWP 0x00000080 -#define IIM_FBAC_FBOP 0x00000040 -#define IIM_FBAC_FBRP 0x00000020 -#define IIM_FBAC_FBESP 0x00000008 -#define IIM_PROTECTION 0x000000e8 -#define IIM_FMAX 31 - -/* Number of I2C buses */ -#define I2C_BUS_CNT 3 - -/* I2Cn control register bits */ -#define I2C_EN 0x80 -#define I2C_IEN 0x40 -#define I2C_STA 0x20 -#define I2C_TX 0x10 -#define I2C_TXAK 0x08 -#define I2C_RSTA 0x04 -#define I2C_INIT_MASK (I2C_EN | I2C_STA | I2C_TX | I2C_RSTA) - -/* I2Cn status register bits */ -#define I2C_CF 0x80 -#define I2C_AAS 0x40 -#define I2C_BB 0x20 -#define I2C_AL 0x10 -#define I2C_SRW 0x04 -#define I2C_IF 0x02 -#define I2C_RXAK 0x01 - -/* POTAR - PCI Outbound Translation Address Register - */ -#define POTAR_TA_MASK 0x000fffff - -/* POBAR - PCI Outbound Base Address Register - */ -#define POBAR_BA_MASK 0x000fffff - -/* POCMR - PCI Outbound Comparision Mask Register - */ -#define POCMR_EN 0x80000000 -#define POCMR_IO 0x40000000 /* 0-memory space 1-I/O space */ -#define POCMR_PRE 0x20000000 /* prefetch enable */ -#define POCMR_SBS 0x00100000 /* special byte swap enable */ -#define POCMR_CM_MASK 0x000fffff -#define POCMR_CM_4G 0x00000000 -#define POCMR_CM_2G 0x00080000 -#define POCMR_CM_1G 0x000C0000 -#define POCMR_CM_512M 0x000E0000 -#define POCMR_CM_256M 0x000F0000 -#define POCMR_CM_128M 0x000F8000 -#define POCMR_CM_64M 0x000FC000 -#define POCMR_CM_32M 0x000FE000 -#define POCMR_CM_16M 0x000FF000 -#define POCMR_CM_8M 0x000FF800 -#define POCMR_CM_4M 0x000FFC00 -#define POCMR_CM_2M 0x000FFE00 -#define POCMR_CM_1M 0x000FFF00 -#define POCMR_CM_512K 0x000FFF80 -#define POCMR_CM_256K 0x000FFFC0 -#define POCMR_CM_128K 0x000FFFE0 -#define POCMR_CM_64K 0x000FFFF0 -#define POCMR_CM_32K 0x000FFFF8 -#define POCMR_CM_16K 0x000FFFFC -#define POCMR_CM_8K 0x000FFFFE -#define POCMR_CM_4K 0x000FFFFF - -/* PITAR - PCI Inbound Translation Address Register - */ -#define PITAR_TA_MASK 0x000fffff - -/* PIBAR - PCI Inbound Base/Extended Address Register - */ -#define PIBAR_MASK 0xffffffff -#define PIEBAR_EBA_MASK 0x000fffff - -/* PIWAR - PCI Inbound Windows Attributes Register - */ -#define PIWAR_EN 0x80000000 -#define PIWAR_SBS 0x40000000 -#define PIWAR_PF 0x20000000 -#define PIWAR_RTT_MASK 0x000f0000 -#define PIWAR_RTT_NO_SNOOP 0x00040000 -#define PIWAR_RTT_SNOOP 0x00050000 -#define PIWAR_WTT_MASK 0x0000f000 -#define PIWAR_WTT_NO_SNOOP 0x00004000 -#define PIWAR_WTT_SNOOP 0x00005000 -#define PIWAR_IWS_MASK 0x0000003F -#define PIWAR_IWS_4K 0x0000000B -#define PIWAR_IWS_8K 0x0000000C -#define PIWAR_IWS_16K 0x0000000D -#define PIWAR_IWS_32K 0x0000000E -#define PIWAR_IWS_64K 0x0000000F -#define PIWAR_IWS_128K 0x00000010 -#define PIWAR_IWS_256K 0x00000011 -#define PIWAR_IWS_512K 0x00000012 -#define PIWAR_IWS_1M 0x00000013 -#define PIWAR_IWS_2M 0x00000014 -#define PIWAR_IWS_4M 0x00000015 -#define PIWAR_IWS_8M 0x00000016 -#define PIWAR_IWS_16M 0x00000017 -#define PIWAR_IWS_32M 0x00000018 -#define PIWAR_IWS_64M 0x00000019 -#define PIWAR_IWS_128M 0x0000001A -#define PIWAR_IWS_256M 0x0000001B -#define PIWAR_IWS_512M 0x0000001C -#define PIWAR_IWS_1G 0x0000001D -#define PIWAR_IWS_2G 0x0000001E - -#endif /* __MPC512X_H__ */