From: Codrin Ciubotariu Date: Fri, 24 Jul 2015 13:52:45 +0000 (+0300) Subject: drivers/net/vsc9953: Cleanup patch X-Git-Tag: v2015.10-rc4~23^2~14 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=3cc8cfffb21b618a51a51e746aac709a12540b79;p=u-boot drivers/net/vsc9953: Cleanup patch This patch groups some macros defined for registers and replaces some magic numbers from vsc9953 with macros. Also, "port" and "port_nr" words are replaced with "port_no", puts each variable declaration on a line and removes unnecessary tabs. Signed-off-by: Codrin Ciubotariu Acked-by: Joe Hershberger Reviewed-by: York Sun --- diff --git a/drivers/net/vsc9953.c b/drivers/net/vsc9953.c index 068ab8695b..524b979d52 100644 --- a/drivers/net/vsc9953.c +++ b/drivers/net/vsc9953.c @@ -10,6 +10,8 @@ #include #include #include +#include +#include #include static struct vsc9953_info vsc9953_l2sw = { @@ -25,50 +27,50 @@ static struct vsc9953_info vsc9953_l2sw = { .port[9] = VSC9953_PORT_INFO_INITIALIZER(9), }; -void vsc9953_port_info_set_mdio(int port, struct mii_dev *bus) +void vsc9953_port_info_set_mdio(int port_no, struct mii_dev *bus) { - if (!VSC9953_PORT_CHECK(port)) + if (!VSC9953_PORT_CHECK(port_no)) return; - vsc9953_l2sw.port[port].bus = bus; + vsc9953_l2sw.port[port_no].bus = bus; } -void vsc9953_port_info_set_phy_address(int port, int address) +void vsc9953_port_info_set_phy_address(int port_no, int address) { - if (!VSC9953_PORT_CHECK(port)) + if (!VSC9953_PORT_CHECK(port_no)) return; - vsc9953_l2sw.port[port].phyaddr = address; + vsc9953_l2sw.port[port_no].phyaddr = address; } -void vsc9953_port_info_set_phy_int(int port, phy_interface_t phy_int) +void vsc9953_port_info_set_phy_int(int port_no, phy_interface_t phy_int) { - if (!VSC9953_PORT_CHECK(port)) + if (!VSC9953_PORT_CHECK(port_no)) return; - vsc9953_l2sw.port[port].enet_if = phy_int; + vsc9953_l2sw.port[port_no].enet_if = phy_int; } -void vsc9953_port_enable(int port) +void vsc9953_port_enable(int port_no) { - if (!VSC9953_PORT_CHECK(port)) + if (!VSC9953_PORT_CHECK(port_no)) return; - vsc9953_l2sw.port[port].enabled = 1; + vsc9953_l2sw.port[port_no].enabled = 1; } -void vsc9953_port_disable(int port) +void vsc9953_port_disable(int port_no) { - if (!VSC9953_PORT_CHECK(port)) + if (!VSC9953_PORT_CHECK(port_no)) return; - vsc9953_l2sw.port[port].enabled = 0; + vsc9953_l2sw.port[port_no].enabled = 0; } static void vsc9953_mdio_write(struct vsc9953_mii_mng *phyregs, int port_addr, int regnum, int value) { - int timeout = 50000; + int timeout = 50000; out_le32(&phyregs->miimcmd, (0x1 << 31) | ((port_addr & 0x1f) << 25) | ((regnum & 0x1f) << 20) | ((value & 0xffff) << 4) | @@ -85,8 +87,8 @@ static void vsc9953_mdio_write(struct vsc9953_mii_mng *phyregs, int port_addr, static int vsc9953_mdio_read(struct vsc9953_mii_mng *phyregs, int port_addr, int regnum) { - int value = 0xFFFF; - int timeout = 50000; + int value = 0xFFFF; + int timeout = 50000; while ((in_le32(&phyregs->miimstatus) & MIIMIND_OPR_PEND) && --timeout) udelay(1); @@ -120,8 +122,8 @@ static int vsc9953_mdio_read(struct vsc9953_mii_mng *phyregs, int port_addr, static int init_phy(struct eth_device *dev) { - struct vsc9953_port_info *l2sw_port = dev->priv; - struct phy_device *phydev = NULL; + struct vsc9953_port_info *l2sw_port = dev->priv; + struct phy_device *phydev = NULL; #ifdef CONFIG_PHYLIB if (!l2sw_port->bus) @@ -148,21 +150,21 @@ static int init_phy(struct eth_device *dev) return 0; } -static int vsc9953_port_init(int port) +static int vsc9953_port_init(int port_no) { - struct eth_device *dev; + struct eth_device *dev; /* Internal ports never have a PHY */ - if (VSC9953_INTERNAL_PORT_CHECK(port)) + if (VSC9953_INTERNAL_PORT_CHECK(port_no)) return 0; /* alloc eth device */ dev = (struct eth_device *)calloc(1, sizeof(struct eth_device)); if (!dev) - return 1; + return -ENOMEM; - sprintf(dev->name, "SW@PORT%d", port); - dev->priv = &vsc9953_l2sw.port[port]; + sprintf(dev->name, "SW@PORT%d", port_no); + dev->priv = &vsc9953_l2sw.port[port_no]; dev->init = NULL; dev->halt = NULL; dev->send = NULL; @@ -170,7 +172,7 @@ static int vsc9953_port_init(int port) if (init_phy(dev)) { free(dev); - return 1; + return -ENODEV; } return 0; @@ -178,13 +180,15 @@ static int vsc9953_port_init(int port) void vsc9953_init(bd_t *bis) { - u32 i, hdx_cfg = 0, phy_addr = 0; - int timeout; - struct vsc9953_system_reg *l2sys_reg; - struct vsc9953_qsys_reg *l2qsys_reg; - struct vsc9953_dev_gmii *l2dev_gmii_reg; - struct vsc9953_analyzer *l2ana_reg; - struct vsc9953_devcpu_gcb *l2dev_gcb; + u32 i; + u32 hdx_cfg = 0; + u32 phy_addr = 0; + int timeout; + struct vsc9953_system_reg *l2sys_reg; + struct vsc9953_qsys_reg *l2qsys_reg; + struct vsc9953_dev_gmii *l2dev_gmii_reg; + struct vsc9953_analyzer *l2ana_reg; + struct vsc9953_devcpu_gcb *l2dev_gcb; l2dev_gmii_reg = (struct vsc9953_dev_gmii *)(VSC9953_OFFSET + VSC9953_DEV_GMII_OFFSET); @@ -312,83 +316,81 @@ void vsc9953_init(bd_t *bis) #ifdef CONFIG_VSC9953_CMD /* Enable/disable status of a VSC9953 port */ -static void vsc9953_port_status_set(int port_nr, u8 enabled) +static void vsc9953_port_status_set(int port_no, u8 enabled) { - u32 val; - struct vsc9953_qsys_reg *l2qsys_reg; + struct vsc9953_qsys_reg *l2qsys_reg; /* Administrative down */ - if (vsc9953_l2sw.port[port_nr].enabled == 0) + if (!vsc9953_l2sw.port[port_no].enabled) return; l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET + VSC9953_QSYS_OFFSET); - val = in_le32(&l2qsys_reg->sys.switch_port_mode[port_nr]); - if (enabled == 1) - val |= (1 << 13); + if (enabled) + setbits_le32(&l2qsys_reg->sys.switch_port_mode[port_no], + VSC9953_PORT_ENA); else - val &= ~(1 << 13); - - out_le32(&l2qsys_reg->sys.switch_port_mode[port_nr], val); + clrbits_le32(&l2qsys_reg->sys.switch_port_mode[port_no], + VSC9953_PORT_ENA); } /* Set all VSC9953 ports' status */ static void vsc9953_port_all_status_set(u8 enabled) { - int i; + int i; for (i = 0; i < VSC9953_MAX_PORTS; i++) vsc9953_port_status_set(i, enabled); } /* Start autonegotiation for a VSC9953 PHY */ -static void vsc9953_phy_autoneg(int port_nr) +static void vsc9953_phy_autoneg(int port_no) { - if (!vsc9953_l2sw.port[port_nr].phydev) + if (!vsc9953_l2sw.port[port_no].phydev) return; - if (vsc9953_l2sw.port[port_nr].phydev->drv->startup( - vsc9953_l2sw.port[port_nr].phydev)) - printf("Failed to start PHY for port %d\n", port_nr); + if (vsc9953_l2sw.port[port_no].phydev->drv->startup( + vsc9953_l2sw.port[port_no].phydev)) + printf("Failed to start PHY for port %d\n", port_no); } /* Start autonegotiation for all VSC9953 PHYs */ static void vsc9953_phy_all_autoneg(void) { - int i; + int i; for (i = 0; i < VSC9953_MAX_PORTS; i++) vsc9953_phy_autoneg(i); } /* Print a VSC9953 port's configuration */ -static void vsc9953_port_config_show(int port) +static void vsc9953_port_config_show(int port_no) { - int speed; - int duplex; - int link; - u8 enabled; - u32 val; + int speed; + int duplex; + int link; + u8 enabled; + u32 val; struct vsc9953_qsys_reg *l2qsys_reg; l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET + VSC9953_QSYS_OFFSET); - val = in_le32(&l2qsys_reg->sys.switch_port_mode[port]); - enabled = vsc9953_l2sw.port[port].enabled & - ((val & 0x00002000) >> 13); + val = in_le32(&l2qsys_reg->sys.switch_port_mode[port_no]); + enabled = vsc9953_l2sw.port[port_no].enabled && + (val & VSC9953_PORT_ENA); /* internal ports (8 and 9) are fixed */ - if (VSC9953_INTERNAL_PORT_CHECK(port)) { + if (VSC9953_INTERNAL_PORT_CHECK(port_no)) { link = 1; speed = SPEED_2500; duplex = DUPLEX_FULL; } else { - if (vsc9953_l2sw.port[port].phydev) { - link = vsc9953_l2sw.port[port].phydev->link; - speed = vsc9953_l2sw.port[port].phydev->speed; - duplex = vsc9953_l2sw.port[port].phydev->duplex; + if (vsc9953_l2sw.port[port_no].phydev) { + link = vsc9953_l2sw.port[port_no].phydev->link; + speed = vsc9953_l2sw.port[port_no].phydev->speed; + duplex = vsc9953_l2sw.port[port_no].phydev->duplex; } else { link = -1; speed = -1; @@ -396,7 +398,7 @@ static void vsc9953_port_config_show(int port) } } - printf("%8d ", port); + printf("%8d ", port_no); printf("%8s ", enabled == 1 ? "enabled" : "disabled"); printf("%8s ", link == 1 ? "up" : "down"); @@ -426,7 +428,7 @@ static void vsc9953_port_config_show(int port) /* Print VSC9953 ports' configuration */ static void vsc9953_port_all_config_show(void) { - int i; + int i; for (i = 0; i < VSC9953_MAX_PORTS; i++) vsc9953_port_config_show(i); @@ -487,11 +489,11 @@ static int do_ethsw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) U_BOOT_CMD(ethsw, 5, 0, do_ethsw, "vsc9953 l2 switch commands", - "port enable|disable\n" + "port enable|disable\n" " - enable/disable an l2 switch port\n" - " port_nr=0..9; use \"all\" for all ports\n" - "ethsw port show\n" + " port_no=0..9; use \"all\" for all ports\n" + "ethsw port show\n" " - show an l2 switch port's configuration\n" - " port_nr=0..9; use \"all\" for all ports\n" + " port_no=0..9; use \"all\" for all ports\n" ); #endif /* CONFIG_VSC9953_CMD */ diff --git a/include/vsc9953.h b/include/vsc9953.h index 3f14dad313..6ebe141d68 100644 --- a/include/vsc9953.h +++ b/include/vsc9953.h @@ -17,7 +17,6 @@ #include #include #include -#include #define VSC9953_OFFSET (CONFIG_SYS_CCSRBAR_DEFAULT + 0x800000) @@ -33,29 +32,57 @@ #define T1040_SWITCH_GMII_DEV_OFFSET 0x010000 #define VSC9953_PHY_REGS_OFFST 0x0000AC +/* Macros for vsc9953_chip_regs.soft_rst register */ #define VSC9953_SOFT_SWC_RST_ENA 0x00000001 + +/* Macros for vsc9953_sys_sys.reset_cfg register */ #define VSC9953_CORE_ENABLE 0x80 #define VSC9953_MEM_ENABLE 0x40 #define VSC9953_MEM_INIT 0x20 -#define VSC9953_PORT_ENA 0x00003a00 +/* Macros for vsc9953_dev_gmii_mac_cfg_status.mac_ena_cfg register */ #define VSC9953_MAC_ENA_CFG 0x00000011 + +/* Macros for vsc9953_dev_gmii_mac_cfg_status.mac_mode_cfg register */ #define VSC9953_MAC_MODE_CFG 0x00000011 + +/* Macros for vsc9953_dev_gmii_mac_cfg_status.mac_ifg_cfg register */ #define VSC9953_MAC_IFG_CFG 0x00000515 + +/* Macros for vsc9953_dev_gmii_mac_cfg_status.mac_hdx_cfg register */ #define VSC9953_MAC_HDX_CFG 0x00001043 + +/* Macros for vsc9953_dev_gmii_mac_cfg_status.mac_maxlen_cfg register */ +#define VSC9953_MAC_MAX_LEN 0x000005ee + +/* Macros for vsc9953_dev_gmii_port_mode.clock_cfg register */ #define VSC9953_CLOCK_CFG 0x00000001 #define VSC9953_CLOCK_CFG_1000M 0x00000001 + +/* Macros for vsc9953_sys_sys.front_port_mode register */ +#define VSC9953_FRONT_PORT_MODE 0x00000000 + +/* Macros for vsc9953_ana_pfc.pfc_cfg register */ #define VSC9953_PFC_FC 0x00000001 #define VSC9953_PFC_FC_QSGMII 0x00000000 + +/* Macros for vsc9953_sys_pause_cfg.mac_fc_cfg register */ #define VSC9953_MAC_FC_CFG 0x04700000 #define VSC9953_MAC_FC_CFG_QSGMII 0x00700000 + +/* Macros for vsc9953_sys_pause_cfg.pause_cfg register */ #define VSC9953_PAUSE_CFG 0x001ffffe + +/* Macros for vsc9953_sys_pause_cfgtot_tail_drop_lvl register */ #define VSC9953_TOT_TAIL_DROP_LVL 0x000003ff -#define VSC9953_FRONT_PORT_MODE 0x00000000 -#define VSC9953_MAC_MAX_LEN 0x000005ee +/* Macros for vsc9953_vcap_core_cfg.vcap_mv_cfg register */ #define VSC9953_VCAP_MV_CFG 0x0000ffff #define VSC9953_VCAP_UPDATE_CTRL 0x01000004 + +/* Macros for vsc9953_qsys_sys.switch_port_mode register */ +#define VSC9953_PORT_ENA 0x00003a00 + #define VSC9953_MAX_PORTS 10 #define VSC9953_PORT_CHECK(port) \ (((port) < 0 || (port) >= VSC9953_MAX_PORTS) ? 0 : 1) @@ -74,9 +101,9 @@ struct vsc9953_mdio_info { char *name; }; -/* VSC9953 ANA structure for T1040 U-boot*/ +/* VSC9953 ANA structure */ -struct vsc9953_ana_port { +struct vsc9953_ana_port { u32 vlan_cfg; u32 drop_cfg; u32 qos_cfg; @@ -138,7 +165,7 @@ struct vsc9953_ana_pgid { u32 port_grp_id[91]; }; -struct vsc9953_ana_pfc { +struct vsc9953_ana_pfc { u32 pfc_cfg; u32 reserved1[15]; }; @@ -149,7 +176,7 @@ struct vsc9953_ana_pol_misc { u32 pol_hyst; }; -struct vsc9953_ana_common { +struct vsc9953_ana_common { u32 aggr_cfg; u32 cpuq_cfg; u32 cpuq_8021_cfg; @@ -176,18 +203,18 @@ struct vsc9953_analyzer { u32 reserved5[196]; struct vsc9953_ana_common common; }; -/* END VSC9953 ANA structure for T1040 U-boot*/ +/* END VSC9953 ANA structure t*/ -/* VSC9953 DEV_GMII structure for T1040 U-boot*/ +/* VSC9953 DEV_GMII structure */ -struct vsc9953_dev_gmii_port_mode { +struct vsc9953_dev_gmii_port_mode { u32 clock_cfg; u32 port_misc; u32 reserved1; u32 eee_cfg; }; -struct vsc9953_dev_gmii_mac_cfg_status { +struct vsc9953_dev_gmii_mac_cfg_status { u32 mac_ena_cfg; u32 mac_mode_cfg; u32 mac_maxlen_cfg; @@ -205,11 +232,11 @@ struct vsc9953_dev_gmii { struct vsc9953_dev_gmii_mac_cfg_status mac_cfg_status; }; -/* END VSC9953 DEV_GMII structure for T1040 U-boot*/ +/* END VSC9953 DEV_GMII structure */ -/* VSC9953 QSYS structure for T1040 U-boot*/ +/* VSC9953 QSYS structure */ -struct vsc9953_qsys_hsch { +struct vsc9953_qsys_hsch { u32 cir_cfg; u32 reserved1; u32 se_cfg; @@ -218,7 +245,7 @@ struct vsc9953_qsys_hsch { u32 reserved2[20]; }; -struct vsc9953_qsys_sys { +struct vsc9953_qsys_sys { u32 port_mode[12]; u32 switch_port_mode[11]; u32 stat_cnt_cfg; @@ -232,32 +259,32 @@ struct vsc9953_qsys_sys { u32 reserved1[23]; }; -struct vsc9953_qsys_qos_cfg { +struct vsc9953_qsys_qos_cfg { u32 red_profile[16]; u32 res_qos_mode; }; -struct vsc9953_qsys_drop_cfg { +struct vsc9953_qsys_drop_cfg { u32 egr_drop_mode; }; -struct vsc9953_qsys_mmgt { +struct vsc9953_qsys_mmgt { u32 eq_cntrl; u32 reserved1; }; -struct vsc9953_qsys_hsch_misc { +struct vsc9953_qsys_hsch_misc { u32 hsch_misc_cfg; u32 reserved1[546]; }; -struct vsc9953_qsys_res_ctrl { +struct vsc9953_qsys_res_ctrl { u32 res_cfg; u32 res_stat; }; -struct vsc9953_qsys_reg { +struct vsc9953_qsys_reg { struct vsc9953_qsys_hsch hsch[108]; struct vsc9953_qsys_sys sys; struct vsc9953_qsys_qos_cfg qos_cfg; @@ -267,18 +294,18 @@ struct vsc9953_qsys_reg { struct vsc9953_qsys_res_ctrl res_ctrl[1024]; }; -/* END VSC9953 QSYS structure for T1040 U-boot*/ +/* END VSC9953 QSYS structure */ -/* VSC9953 SYS structure for T1040 U-boot*/ +/* VSC9953 SYS structure */ -struct vsc9953_sys_stat { +struct vsc9953_sys_stat { u32 rx_cntrs[64]; u32 tx_cntrs[64]; u32 drop_cntrs[64]; u32 reserved1[6]; }; -struct vsc9953_sys_sys { +struct vsc9953_sys_sys { u32 reset_cfg; u32 reserved1; u32 vlan_etype_cfg; @@ -289,7 +316,7 @@ struct vsc9953_sys_sys { u32 reserved2[50]; }; -struct vsc9953_sys_pause_cfg { +struct vsc9953_sys_pause_cfg { u32 pause_cfg[11]; u32 pause_tot_cfg; u32 tail_drop_level[11]; @@ -297,29 +324,29 @@ struct vsc9953_sys_pause_cfg { u32 mac_fc_cfg[10]; }; -struct vsc9953_sys_mmgt { +struct vsc9953_sys_mmgt { u16 free_cnt; }; -struct vsc9953_system_reg { +struct vsc9953_system_reg { struct vsc9953_sys_stat stat; struct vsc9953_sys_sys sys; struct vsc9953_sys_pause_cfg pause_cfg; struct vsc9953_sys_mmgt mmgt; }; -/* END VSC9953 SYS structure for T1040 U-boot*/ +/* END VSC9953 SYS structure */ -/* VSC9953 DEVCPU_GCB structure for T1040 U-boot*/ +/* VSC9953 DEVCPU_GCB structure */ -struct vsc9953_chip_regs { +struct vsc9953_chip_regs { u32 chipd_id; u32 gpr; u32 soft_rst; }; -struct vsc9953_gpio { +struct vsc9953_gpio { u32 gpio_out_set[10]; u32 gpio_out_clr[10]; u32 gpio_out[10]; @@ -338,31 +365,31 @@ struct vsc9953_mii_mng { u32 miiscan_lst_rslts_valid; }; -struct vsc9953_mii_read_scan { +struct vsc9953_mii_read_scan { u32 mii_scan_results_sticky[2]; }; -struct vsc9953_devcpu_gcb { +struct vsc9953_devcpu_gcb { struct vsc9953_chip_regs chip_regs; struct vsc9953_gpio gpio; struct vsc9953_mii_mng mii_mng[2]; struct vsc9953_mii_read_scan mii_read_scan; }; -/* END VSC9953 DEVCPU_GCB structure for T1040 U-boot*/ +/* END VSC9953 DEVCPU_GCB structure */ -/* VSC9953 IS* structure for T1040 U-boot*/ +/* VSC9953 IS* structure */ -struct vsc9953_vcap_core_cfg { +struct vsc9953_vcap_core_cfg { u32 vcap_update_ctrl; u32 vcap_mv_cfg; }; -struct vsc9953_vcap { -struct vsc9953_vcap_core_cfg vcap_core_cfg; +struct vsc9953_vcap { + struct vsc9953_vcap_core_cfg vcap_core_cfg; }; -/* END VSC9953 IS* structure for T1040 U-boot*/ +/* END VSC9953 IS* structure */ #define VSC9953_PORT_INFO_INITIALIZER(idx) \ { \ @@ -388,15 +415,15 @@ struct vsc9953_port_info { /* Structure to describe a VSC9953 switch */ struct vsc9953_info { - struct vsc9953_port_info port[VSC9953_MAX_PORTS]; + struct vsc9953_port_info port[VSC9953_MAX_PORTS]; }; void vsc9953_init(bd_t *bis); -void vsc9953_port_info_set_mdio(int port, struct mii_dev *bus); -void vsc9953_port_info_set_phy_address(int port, int address); -void vsc9953_port_enable(int port); -void vsc9953_port_disable(int port); -void vsc9953_port_info_set_phy_int(int port, phy_interface_t phy_int); +void vsc9953_port_info_set_mdio(int port_no, struct mii_dev *bus); +void vsc9953_port_info_set_phy_address(int port_no, int address); +void vsc9953_port_enable(int port_no); +void vsc9953_port_disable(int port_no); +void vsc9953_port_info_set_phy_int(int port_no, phy_interface_t phy_int); #endif /* _VSC9953_H_ */