From: Stephan Linz <linz@li-pro.net>
Date: Sat, 25 Feb 2012 00:48:34 +0000 (+0000)
Subject: microblaze: Wire up LL_TEMAC driver initialization
X-Git-Tag: v2012.04-rc2~8^2~8
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=3ceecef14e2258157c846b3aaa26d7cdcd833b05;p=u-boot

microblaze: Wire up LL_TEMAC driver initialization

Initialize ll_temac driver.

Reported-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Stephan Linz <linz@li-pro.net>
---

diff --git a/board/xilinx/microblaze-generic/microblaze-generic.c b/board/xilinx/microblaze-generic/microblaze-generic.c
index c4c13a6682..a1e2bfee87 100644
--- a/board/xilinx/microblaze-generic/microblaze-generic.c
+++ b/board/xilinx/microblaze-generic/microblaze-generic.c
@@ -90,5 +90,41 @@ int board_eth_init(bd_t *bis)
 	ret |= xilinx_emaclite_initialize(bis, XILINX_EMACLITE_BASEADDR,
 			txpp, rxpp);
 #endif
+
+#ifdef CONFIG_XILINX_LL_TEMAC
+# ifdef XILINX_LLTEMAC_BASEADDR
+#  ifdef XILINX_LLTEMAC_FIFO_BASEADDR
+	ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR,
+			XILINX_LL_TEMAC_M_FIFO, XILINX_LLTEMAC_FIFO_BASEADDR);
+#  elif XILINX_LLTEMAC_SDMA_CTRL_BASEADDR
+#   if XILINX_LLTEMAC_SDMA_USE_DCR == 1
+	ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR,
+			XILINX_LL_TEMAC_M_SDMA_DCR,
+			XILINX_LLTEMAC_SDMA_CTRL_BASEADDR);
+#   else
+	ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR,
+			XILINX_LL_TEMAC_M_SDMA_PLB,
+			XILINX_LLTEMAC_SDMA_CTRL_BASEADDR);
+#   endif
+#  endif
+# endif
+# ifdef XILINX_LLTEMAC_BASEADDR1
+#  ifdef XILINX_LLTEMAC_FIFO_BASEADDR1
+	ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR1,
+			XILINX_LL_TEMAC_M_FIFO, XILINX_LLTEMAC_FIFO_BASEADDR1);
+#  elif XILINX_LLTEMAC_SDMA_CTRL_BASEADDR1
+#   if XILINX_LLTEMAC_SDMA_USE_DCR == 1
+	ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR1,
+			XILINX_LL_TEMAC_M_SDMA_DCR,
+			XILINX_LLTEMAC_SDMA_CTRL_BASEADDR1);
+#   else
+	ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR1,
+			XILINX_LL_TEMAC_M_SDMA_PLB,
+			XILINX_LLTEMAC_SDMA_CTRL_BASEADDR1);
+#   endif
+#  endif
+# endif
+#endif
+
 	return ret;
 }