From: Fabio Estevam <fabio.estevam@freescale.com>
Date: Sun, 5 May 2013 15:52:55 +0000 (+0000)
Subject: mx23evk: Do not set voltage selection bit for SSP pads
X-Git-Tag: v2013.07-rc1~85^2~9
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=3d11444c42a9f72953f258dd58248e39c659292d;p=u-boot

mx23evk: Do not set voltage selection bit for SSP pads

mx23 SSP pad registers do not contain voltage selection bit, so just remove it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---

diff --git a/board/freescale/mx23evk/spl_boot.c b/board/freescale/mx23evk/spl_boot.c
index 8da992b0b8..6be8c8d9d0 100644
--- a/board/freescale/mx23evk/spl_boot.c
+++ b/board/freescale/mx23evk/spl_boot.c
@@ -25,7 +25,7 @@
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/sys_proto.h>
 
-#define	MUX_CONFIG_SSP1	(MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
+#define	MUX_CONFIG_SSP1	(MXS_PAD_8MA | MXS_PAD_PULLUP)
 #define	MUX_CONFIG_EMI	(MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP)
 
 const iomux_cfg_t iomux_setup[] = {