From: Bin Meng Date: Wed, 31 Dec 2014 08:05:12 +0000 (+0800) Subject: serial: ns16550: Support ns16550 compatible pci uart devices X-Git-Tag: v2015.04-rc1~195^2~36 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=3db886a5bf38700b51a1d7a7b00ec8b64c9c2089;p=u-boot serial: ns16550: Support ns16550 compatible pci uart devices There are many pci uart devices which are ns16550 compatible. We can describe them in the board dts file and use it as the U-Boot serial console as specified in the chosen node 'stdout-path' property. Those pci uart devices can have their register be memory-mapped, or i/o-mapped. The driver will try to use the memory-mapped register if the reg property in the node has an entry to describe the memory-mapped register, otherwise i/o-mapped register will be used. Signed-off-by: Bin Meng Acked-by: Simon Glass --- diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index af5beba39f..70c946249f 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -289,7 +289,38 @@ int ns16550_serial_ofdata_to_platdata(struct udevice *dev) struct ns16550_platdata *plat = dev->platdata; fdt_addr_t addr; + /* try Processor Local Bus device first */ addr = fdtdec_get_addr(gd->fdt_blob, dev->of_offset, "reg"); +#ifdef CONFIG_PCI + if (addr == FDT_ADDR_T_NONE) { + /* then try pci device */ + struct fdt_pci_addr pci_addr; + u32 bar; + int ret; + + /* we prefer to use a memory-mapped register */ + ret = fdtdec_get_pci_addr(gd->fdt_blob, dev->of_offset, + FDT_PCI_SPACE_MEM32, "reg", + &pci_addr); + if (ret) { + /* try if there is any i/o-mapped register */ + ret = fdtdec_get_pci_addr(gd->fdt_blob, + dev->of_offset, + FDT_PCI_SPACE_IO, + "reg", &pci_addr); + if (ret) + return ret; + } + + ret = fdtdec_get_pci_bar32(gd->fdt_blob, dev->of_offset, + &pci_addr, &bar); + if (ret) + return ret; + + addr = bar; + } +#endif + if (addr == FDT_ADDR_T_NONE) return -EINVAL;