From: Wolfgang Denk Date: Sat, 8 Oct 2005 23:41:48 +0000 (+0200) Subject: Add support for NetSilicon NS7520 processor. X-Git-Tag: LABEL_2006_03_12_0025~97 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=3df5bea0b0bddc196bf952c51d1dd54d966b82ba;p=u-boot Add support for NetSilicon NS7520 processor. Patch by Art Shipkowski, 12 May 2005 Cleanup. --- diff --git a/CHANGELOG b/CHANGELOG index 66994b8bae..ca73b1ec0a 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,11 @@ Changes for U-Boot 1.1.4: ====================================================================== +* Cleanup + +* Add support for NetSilicon NS7520 processor. + Patch by Art Shipkowski, 12 May 2005 + * Add support for AP1000 board. Patch by James MacAulay, 07 Oct 2005 @@ -15,7 +20,7 @@ Changes for U-Boot 1.1.4: issue - the table is aligned on a PAGE_SIZE (4096) boundary). * Fixed compilation for ARM when using a (standard) hard-FP toolchain - Patch by Anders Larsen, 07 Oct 2005 + Patch by Anders Larsen, 07 Oct 2005 * Cleanup warnings for cpu/arm720t & cpu/arm1136 files. sed the linker scripts, rather than pre-process them. diff --git a/CREDITS b/CREDITS index 23055cbafa..c1686a56ef 100644 --- a/CREDITS +++ b/CREDITS @@ -377,6 +377,10 @@ N: Robert Schwebel E: r.schwebel@pengutronix.de D: Support for csb226, logodl and innokom boards (PXA2xx) +N: Art Shipkowski +E: art@videon-central.com +D: Support for NetSilicon NS7520 + N: Yasushi Shoji E: yashi@atmark-techno.com D: Support for Xilinx MicroBlaze, for Atmark Techno SUZAKU FPGA board diff --git a/README b/README index 71e9dc91ae..a45ed6dc04 100644 --- a/README +++ b/README @@ -297,9 +297,9 @@ The following options need to be configured: CONFIG_FADS850SAR CONFIG_NX823 CONFIG_WALNUT CONFIG_FADS860T CONFIG_OCRTC CONFIG_ZPC1900 CONFIG_FLAGADM CONFIG_ORSG CONFIG_ZUMA - CONFIG_FPS850L CONFIG_OXC + CONFIG_FPS850L CONFIG_OXC CONFIG_FPS860L CONFIG_PCI405 - + ARM based boards: ----------------- diff --git a/board/amirix/ap1000/ap1000.c b/board/amirix/ap1000/ap1000.c index 743211fa97..dd836ce221 100644 --- a/board/amirix/ap1000/ap1000.c +++ b/board/amirix/ap1000/ap1000.c @@ -30,218 +30,204 @@ int board_pre_init (void) { - return 0; + return 0; } /** serial number and platform display at startup */ int checkboard (void) { - unsigned char *s = getenv ("serial#"); - unsigned char *e; - - /* After a loadace command, the SystemAce control register is left in a wonky state. */ - /* this code did not work in board_pre_init */ - unsigned char* p = (unsigned char*)AP1000_SYSACE_REGBASE; - p[SYSACE_CTRLREG0] = 0x0; - - /* add platform and device to banner */ - switch(get_device()){ - case AP1xx_AP107_TARGET:{ - puts(AP1xx_AP107_TARGET_STR); - break; - } - case AP1xx_AP120_TARGET:{ - puts(AP1xx_AP120_TARGET_STR); - break; - } - case AP1xx_AP130_TARGET:{ - puts(AP1xx_AP130_TARGET_STR); - break; - } - case AP1xx_AP1070_TARGET:{ - puts(AP1xx_AP1070_TARGET_STR); - break; - } - case AP1xx_AP1100_TARGET:{ - puts(AP1xx_AP1100_TARGET_STR); - break; - } - default:{ - puts(AP1xx_UNKNOWN_STR); - break; - } - } - puts(AP1xx_TARGET_STR); - puts(" with "); - - switch(get_platform()){ - case AP100_BASELINE_PLATFORM: - case AP1000_BASELINE_PLATFORM:{ - puts(AP1xx_BASELINE_PLATFORM_STR); - break; - } - case AP1xx_QUADGE_PLATFORM:{ - puts(AP1xx_QUADGE_PLATFORM_STR); - break; - } - case AP1xx_MGT_REF_PLATFORM:{ - puts(AP1xx_MGT_REF_PLATFORM_STR); - break; - } - case AP1xx_STANDARD_PLATFORM:{ - puts(AP1xx_STANDARD_PLATFORM_STR); - break; - } - case AP1xx_DUAL_PLATFORM:{ - puts(AP1xx_DUAL_PLATFORM_STR); - break; - } - case AP1xx_BASE_SRAM_PLATFORM:{ - puts(AP1xx_BASE_SRAM_PLATFORM_STR); - break; - } - case AP1xx_PCI_PCB_TESTPLATFORM: - case AP1000_PCI_PCB_TESTPLATFORM:{ - puts(AP1xx_PCI_PCB_TESTPLATFORM_STR); - break; - } - case AP1xx_DUAL_GE_MEZZ_TESTPLATFORM:{ - puts(AP1xx_DUAL_GE_MEZZ_TESTPLATFORM_STR); - break; - } - case AP1xx_SFP_MEZZ_TESTPLATFORM:{ - puts(AP1xx_SFP_MEZZ_TESTPLATFORM_STR); - break; - } - default:{ - puts(AP1xx_UNKNOWN_STR); - break; - } - } - - if((get_platform() & AP1xx_TESTPLATFORM_MASK) != 0){ - puts(AP1xx_TESTPLATFORM_STR); - } - else{ - puts(AP1xx_PLATFORM_STR); - } - - putc('\n'); - - puts ("Serial#: "); - - if (!s) { - printf ("### No HW ID - assuming AMIRIX"); - } else { - for (e = s; *e; ++e) { - if (*e == ' ') - break; - } - - for (; s < e; ++s) { - putc (*s); - } - } - - putc ('\n'); - - return (0); + unsigned char *s = getenv ("serial#"); + unsigned char *e; + + /* After a loadace command, the SystemAce control register is left in a wonky state. */ + /* this code did not work in board_pre_init */ + unsigned char *p = (unsigned char *) AP1000_SYSACE_REGBASE; + + p[SYSACE_CTRLREG0] = 0x0; + + /* add platform and device to banner */ + switch (get_device ()) { + case AP1xx_AP107_TARGET: + puts (AP1xx_AP107_TARGET_STR); + break; + case AP1xx_AP120_TARGET: + puts (AP1xx_AP120_TARGET_STR); + break; + case AP1xx_AP130_TARGET: + puts (AP1xx_AP130_TARGET_STR); + break; + case AP1xx_AP1070_TARGET: + puts (AP1xx_AP1070_TARGET_STR); + break; + case AP1xx_AP1100_TARGET: + puts (AP1xx_AP1100_TARGET_STR); + break; + default: + puts (AP1xx_UNKNOWN_STR); + break; + } + puts (AP1xx_TARGET_STR); + puts (" with "); + + switch (get_platform ()) { + case AP100_BASELINE_PLATFORM: + case AP1000_BASELINE_PLATFORM: + puts (AP1xx_BASELINE_PLATFORM_STR); + break; + case AP1xx_QUADGE_PLATFORM: + puts (AP1xx_QUADGE_PLATFORM_STR); + break; + case AP1xx_MGT_REF_PLATFORM: + puts (AP1xx_MGT_REF_PLATFORM_STR); + break; + case AP1xx_STANDARD_PLATFORM: + puts (AP1xx_STANDARD_PLATFORM_STR); + break; + case AP1xx_DUAL_PLATFORM: + puts (AP1xx_DUAL_PLATFORM_STR); + break; + case AP1xx_BASE_SRAM_PLATFORM: + puts (AP1xx_BASE_SRAM_PLATFORM_STR); + break; + case AP1xx_PCI_PCB_TESTPLATFORM: + case AP1000_PCI_PCB_TESTPLATFORM: + puts (AP1xx_PCI_PCB_TESTPLATFORM_STR); + break; + case AP1xx_DUAL_GE_MEZZ_TESTPLATFORM: + puts (AP1xx_DUAL_GE_MEZZ_TESTPLATFORM_STR); + break; + case AP1xx_SFP_MEZZ_TESTPLATFORM: + puts (AP1xx_SFP_MEZZ_TESTPLATFORM_STR); + break; + default: + puts (AP1xx_UNKNOWN_STR); + break; + } + + if ((get_platform () & AP1xx_TESTPLATFORM_MASK) != 0) { + puts (AP1xx_TESTPLATFORM_STR); + } else { + puts (AP1xx_PLATFORM_STR); + } + + putc ('\n'); + + puts ("Serial#: "); + + if (!s) { + printf ("### No HW ID - assuming AMIRIX"); + } else { + for (e = s; *e; ++e) { + if (*e == ' ') + break; + } + + for (; s < e; ++s) { + putc (*s); + } + } + + putc ('\n'); + + return (0); } long int initdram (int board_type) { - unsigned char *s = getenv ("dramsize"); - - if(s != NULL){ - if((s[0] == '0') && ((s[1] == 'x') || (s[1] == 'X'))){ - s += 2; - } - return simple_strtoul(s, NULL, 16); - } - else{ - /* give all 64 MB */ + unsigned char *s = getenv ("dramsize"); + + if (s != NULL) { + if ((s[0] == '0') && ((s[1] == 'x') || (s[1] == 'X'))) { + s += 2; + } + return simple_strtoul (s, NULL, 16); + } else { + /* give all 64 MB */ return 64 * 1024 * 1024; - } + } } -unsigned int get_platform(void){ - unsigned int *revision_reg_ptr = (unsigned int *)AP1xx_FPGA_REV_ADDR; - return (*revision_reg_ptr & AP1xx_PLATFORM_MASK); +unsigned int get_platform (void) +{ + unsigned int *revision_reg_ptr = (unsigned int *) AP1xx_FPGA_REV_ADDR; + + return (*revision_reg_ptr & AP1xx_PLATFORM_MASK); } -unsigned int get_device(void){ - unsigned int *revision_reg_ptr = (unsigned int *)AP1xx_FPGA_REV_ADDR; +unsigned int get_device (void) +{ + unsigned int *revision_reg_ptr = (unsigned int *) AP1xx_FPGA_REV_ADDR; - return (*revision_reg_ptr & AP1xx_TARGET_MASK); + return (*revision_reg_ptr & AP1xx_TARGET_MASK); } -#if 0 // loadace is not working; it appears to be a hardware issue with the system ace. +#if 0 /* loadace is not working; it appears to be a hardware issue with the system ace. */ /* This function loads FPGA configurations from the SystemACE CompactFlash */ -int do_loadace (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +int do_loadace (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { - unsigned char *p = (unsigned char *)AP1000_SYSACE_REGBASE; - int cfg; - - if((p[SYSACE_STATREG0] & 0x10) == 0) { - p[SYSACE_CTRLREG0] = 0x80; - printf ("\nNo CompactFlash Detected\n\n"); - p[SYSACE_CTRLREG0] = 0x00; - return 1; - } - - // reset configuration controller: | 0x80 - // select cpflash & ~0x40 - // cfg start | 0x20 - // wait for cfgstart & ~0x10 - // force cfgmode: | 0x08 - // do no force cfgaddr: & ~0x04 - // clear mpulock: & ~0x02 - // do not force lock request & ~0x01 - - p[SYSACE_CTRLREG0] = 0x80 | 0x20 | 0x08; - p[SYSACE_CTRLREG1] = 0x00; - - // force config address if arg2 exists - if (argc == 2) { - cfg = simple_strtoul(argv[1], NULL, 10); - - if(cfg > 7) { - printf ("\nInvalid Configuration\n\n"); - p[SYSACE_CTRLREG0] = 0x00; - return 1; - } - // Set config address - p[SYSACE_CTRLREG1] = (cfg << 5); - // force cfgaddr - p[SYSACE_CTRLREG0] |= 0x04; - - } else { - cfg = (p[SYSACE_STATREG1] & 0xE0) >> 5; - } - - /* release configuration controller */ - printf("\nLoading V2PRO with config %d...\n", cfg); - p[SYSACE_CTRLREG0] &= ~0x80; - - - while((p[SYSACE_STATREG1] & 0x01) == 0) { - - if(p[SYSACE_ERRREG0] & 0x80) { - // attempting to load an invalid configuration makes the cpflash - // appear to be removed. Reset here to avoid that problem - p[SYSACE_CTRLREG0] = 0x80; - printf("\nConfiguration %d Read Error\n\n", cfg); - p[SYSACE_CTRLREG0] = 0x00; - return 1; - } - } - - p[SYSACE_CTRLREG0] |= 0x20; - - return 0; + unsigned char *p = (unsigned char *) AP1000_SYSACE_REGBASE; + int cfg; + + if ((p[SYSACE_STATREG0] & 0x10) == 0) { + p[SYSACE_CTRLREG0] = 0x80; + printf ("\nNo CompactFlash Detected\n\n"); + p[SYSACE_CTRLREG0] = 0x00; + return 1; + } + + /* reset configuration controller: | 0x80 */ + /* select cpflash & ~0x40 */ + /* cfg start | 0x20 */ + /* wait for cfgstart & ~0x10 */ + /* force cfgmode: | 0x08 */ + /* do no force cfgaddr: & ~0x04 */ + /* clear mpulock: & ~0x02 */ + /* do not force lock request & ~0x01 */ + + p[SYSACE_CTRLREG0] = 0x80 | 0x20 | 0x08; + p[SYSACE_CTRLREG1] = 0x00; + + /* force config address if arg2 exists */ + if (argc == 2) { + cfg = simple_strtoul (argv[1], NULL, 10); + + if (cfg > 7) { + printf ("\nInvalid Configuration\n\n"); + p[SYSACE_CTRLREG0] = 0x00; + return 1; + } + /* Set config address */ + p[SYSACE_CTRLREG1] = (cfg << 5); + /* force cfgaddr */ + p[SYSACE_CTRLREG0] |= 0x04; + + } else { + cfg = (p[SYSACE_STATREG1] & 0xE0) >> 5; + } + + /* release configuration controller */ + printf ("\nLoading V2PRO with config %d...\n", cfg); + p[SYSACE_CTRLREG0] &= ~0x80; + + + while ((p[SYSACE_STATREG1] & 0x01) == 0) { + + if (p[SYSACE_ERRREG0] & 0x80) { + /* attempting to load an invalid configuration makes the cpflash */ + /* appear to be removed. Reset here to avoid that problem */ + p[SYSACE_CTRLREG0] = 0x80; + printf ("\nConfiguration %d Read Error\n\n", cfg); + p[SYSACE_CTRLREG0] = 0x00; + return 1; + } + } + + p[SYSACE_CTRLREG0] |= 0x20; + + return 0; } #endif @@ -260,106 +246,112 @@ int do_loadace (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) * -1 if failed * */ -int do_swconfigbyte(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]){ - unsigned char *sector_buffer = NULL; - unsigned char input_char; - int write_result; - unsigned int input_uint; - - /* display value if no argument */ - if(argc < 2){ - printf("Software configuration byte is currently: 0x%02x\n", - *((unsigned char *) (SW_BYTE_SECTOR_ADDR + SW_BYTE_SECTOR_OFFSET))); - return 0; - } - else if(argc > 3){ - printf("Too many arguments\n"); - return -1; - } - - /* if 3 arguments, 3rd argument is the address to use */ - if(argc == 3){ - input_uint = simple_strtoul(argv[1], NULL, 16); - sector_buffer = (unsigned char *)input_uint; - } - else{ - sector_buffer = (unsigned char *)DEFAULT_TEMP_ADDR; - } - - input_char = simple_strtoul(argv[1], NULL, 0); - if((input_char & ~SW_BYTE_MASK) != 0){ - printf("Input of 0x%02x will be masked to 0x%02x\n", - input_char, (input_char & SW_BYTE_MASK)); - input_char = input_char & SW_BYTE_MASK; - } - - memcpy(sector_buffer, (void *)SW_BYTE_SECTOR_ADDR, SW_BYTE_SECTOR_SIZE); - sector_buffer[SW_BYTE_SECTOR_OFFSET] = input_char; - - - printf("Erasing Flash..."); - if (flash_sect_erase (SW_BYTE_SECTOR_ADDR, (SW_BYTE_SECTOR_ADDR + SW_BYTE_SECTOR_OFFSET))){ - return -1; - } - - printf("Writing to Flash... "); - write_result = flash_write(sector_buffer, SW_BYTE_SECTOR_ADDR, SW_BYTE_SECTOR_SIZE); - if (write_result != 0) { - flash_perror (write_result); - return -1; - } - else{ - printf("done\n"); - printf("Software configuration byte is now: 0x%02x\n", - *((unsigned char *) (SW_BYTE_SECTOR_ADDR + SW_BYTE_SECTOR_OFFSET))); - } - - return 0; +int do_swconfigbyte (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + unsigned char *sector_buffer = NULL; + unsigned char input_char; + int write_result; + unsigned int input_uint; + + /* display value if no argument */ + if (argc < 2) { + printf ("Software configuration byte is currently: 0x%02x\n", + *((unsigned char *) (SW_BYTE_SECTOR_ADDR + + SW_BYTE_SECTOR_OFFSET))); + return 0; + } else if (argc > 3) { + printf ("Too many arguments\n"); + return -1; + } + + /* if 3 arguments, 3rd argument is the address to use */ + if (argc == 3) { + input_uint = simple_strtoul (argv[1], NULL, 16); + sector_buffer = (unsigned char *) input_uint; + } else { + sector_buffer = (unsigned char *) DEFAULT_TEMP_ADDR; + } + + input_char = simple_strtoul (argv[1], NULL, 0); + if ((input_char & ~SW_BYTE_MASK) != 0) { + printf ("Input of 0x%02x will be masked to 0x%02x\n", + input_char, (input_char & SW_BYTE_MASK)); + input_char = input_char & SW_BYTE_MASK; + } + + memcpy (sector_buffer, (void *) SW_BYTE_SECTOR_ADDR, + SW_BYTE_SECTOR_SIZE); + sector_buffer[SW_BYTE_SECTOR_OFFSET] = input_char; + + + printf ("Erasing Flash..."); + if (flash_sect_erase + (SW_BYTE_SECTOR_ADDR, + (SW_BYTE_SECTOR_ADDR + SW_BYTE_SECTOR_OFFSET))) { + return -1; + } + + printf ("Writing to Flash... "); + write_result = + flash_write (sector_buffer, SW_BYTE_SECTOR_ADDR, + SW_BYTE_SECTOR_SIZE); + if (write_result != 0) { + flash_perror (write_result); + return -1; + } else { + printf ("done\n"); + printf ("Software configuration byte is now: 0x%02x\n", + *((unsigned char *) (SW_BYTE_SECTOR_ADDR + + SW_BYTE_SECTOR_OFFSET))); + } + + return 0; } #define ONE_SECOND 1000000 -int do_pause(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]){ - int pause_time; - unsigned int delay_time; - int break_loop = 0; - - /* display value if no argument */ - if(argc < 2){ - pause_time = 1; - } - - else if(argc > 2){ - printf("Too many arguments\n"); - return -1; - } - else{ - pause_time = simple_strtoul(argv[1], NULL, 0); - } - - printf("Pausing with a poll time of %d, press any key to reactivate\n", pause_time); - delay_time = pause_time * ONE_SECOND; - while(break_loop == 0){ - udelay(delay_time); - if(serial_tstc() != 0){ - break_loop = 1; - /* eat user key presses */ - while(serial_tstc() != 0){ - serial_getc(); - } - } - } - - return 0; +int do_pause (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + int pause_time; + unsigned int delay_time; + int break_loop = 0; + + /* display value if no argument */ + if (argc < 2) { + pause_time = 1; + } + + else if (argc > 2) { + printf ("Too many arguments\n"); + return -1; + } else { + pause_time = simple_strtoul (argv[1], NULL, 0); + } + + printf ("Pausing with a poll time of %d, press any key to reactivate\n", pause_time); + delay_time = pause_time * ONE_SECOND; + while (break_loop == 0) { + udelay (delay_time); + if (serial_tstc () != 0) { + break_loop = 1; + /* eat user key presses */ + while (serial_tstc () != 0) { + serial_getc (); + } + } + } + + return 0; } -int do_swreconfig(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]){ - printf("Triggering software reconfigure (software config byte is 0x%02x)...\n", - *((unsigned char *) (SW_BYTE_SECTOR_ADDR + SW_BYTE_SECTOR_OFFSET))); - udelay (1000); - *((unsigned char*)AP1000_CPLD_BASE) = 1; +int do_swreconfig (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + printf ("Triggering software reconfigure (software config byte is 0x%02x)...\n", + *((unsigned char *) (SW_BYTE_SECTOR_ADDR + SW_BYTE_SECTOR_OFFSET))); + udelay (1000); + *((unsigned char *) AP1000_CPLD_BASE) = 1; - return 0; + return 0; } #define GET_DECIMAL(low_byte) ((low_byte >> 5) * 125) @@ -372,301 +364,336 @@ int do_swreconfig(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]){ #define TEMP_ETHERM_BIT 0x02 #define TEMP_LTHERM_BIT 0x01 -int do_temp_sensor(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]){ - char cmd; - int ret_val = 0; - unsigned char temp_byte; - int temp; - int temp_low; - int low; - int low_low; - int high; - int high_low; - int therm; - unsigned char user_data[4] = { 0 }; - int user_data_count = 0; - int ii; - - if(argc > 1){ - cmd = argv[1][0]; - } - else{ - cmd = 's'; /* default to status */ - } - - user_data_count = argc - 2; - for(ii = 0;ii < user_data_count;ii++){ - user_data[ii] = simple_strtoul(argv[2 + ii], NULL, 0); - } - switch (cmd){ - case 's':{ - - if(I2CAccess(0x2, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &temp_byte, I2C_READ) != 0){ - goto fail; - } - printf("Status : 0x%02x ", temp_byte); - if(temp_byte & TEMP_BUSY_BIT){ - printf("BUSY "); - } - - if(temp_byte & TEMP_LHIGH_BIT){ - printf("LHIGH "); - } - - if(temp_byte & TEMP_LLOW_BIT){ - printf("LLOW "); - } - - if(temp_byte & TEMP_EHIGH_BIT){ - printf("EHIGH "); - } - - if(temp_byte & TEMP_ELOW_BIT){ - printf("ELOW "); - } - - if(temp_byte & TEMP_OPEN_BIT){ - printf("OPEN "); - } - - if(temp_byte & TEMP_ETHERM_BIT){ - printf("ETHERM "); - } - - if(temp_byte & TEMP_LTHERM_BIT){ - printf("LTHERM"); - } - printf("\n"); - - if(I2CAccess(0x3, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &temp_byte, I2C_READ) != 0){ - goto fail; - } - printf("Config : 0x%02x ", temp_byte); - - if(I2CAccess(0x4, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &temp_byte, I2C_READ) != 0){ - printf("\n"); - goto fail; - } - printf("Conversion: 0x%02x\n", temp_byte); - if(I2CAccess(0x22, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &temp_byte, I2C_READ) != 0){ - goto fail; - } - printf("Cons Alert: 0x%02x ", temp_byte); - - if(I2CAccess(0x21, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &temp_byte, I2C_READ) != 0){ - printf("\n"); - goto fail; - } - printf("Therm Hyst: %d\n", temp_byte); - - if(I2CAccess(0x0, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &temp_byte, I2C_READ) != 0){ - goto fail; - } - temp = temp_byte; - if(I2CAccess(0x6, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &temp_byte, I2C_READ) != 0){ - goto fail; - } - low = temp_byte; - if(I2CAccess(0x5, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &temp_byte, I2C_READ) != 0){ - goto fail; - } - high = temp_byte; - if(I2CAccess(0x20, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &temp_byte, I2C_READ) != 0){ - goto fail; - } - therm = temp_byte; - printf("Local Temp: %2d Low: %2d High: %2d THERM: %2d\n", temp, low, high, therm); - - if(I2CAccess(0x1, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &temp_byte, I2C_READ) != 0){ - goto fail; - } - temp = temp_byte; - if(I2CAccess(0x10, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &temp_byte, I2C_READ) != 0){ - goto fail; - } - temp_low = temp_byte; - if(I2CAccess(0x8, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &temp_byte, I2C_READ) != 0){ - goto fail; - } - low = temp_byte; - if(I2CAccess(0x14, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &temp_byte, I2C_READ) != 0){ - goto fail; - } - low_low = temp_byte; - if(I2CAccess(0x7, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &temp_byte, I2C_READ) != 0){ - goto fail; - } - high = temp_byte; - if(I2CAccess(0x13, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &temp_byte, I2C_READ) != 0){ - goto fail; - } - high_low = temp_byte; - if(I2CAccess(0x19, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &temp_byte, I2C_READ) != 0){ - goto fail; - } - therm = temp_byte; - if(I2CAccess(0x11, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &temp_byte, I2C_READ) != 0){ - goto fail; - } - printf("Ext Temp : %2d.%03d Low: %2d.%03d High: %2d.%03d THERM: %2d Offset: %2d\n", temp, GET_DECIMAL(temp_low), low, GET_DECIMAL(low_low), high, GET_DECIMAL(high_low), therm, temp_byte); - break; - } - case 'l':{ /* alter local limits : low, high, therm */ - if(argc < 3){ - goto usage; - } - - /* low */ - if(I2CAccess(0xC, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &user_data[0], I2C_WRITE) != 0){ - goto fail; - } - - if(user_data_count > 1){ - /* high */ - if(I2CAccess(0xB, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &user_data[1], I2C_WRITE) != 0){ - goto fail; - } - } - - if(user_data_count > 2){ - /* therm */ - if(I2CAccess(0x20, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &user_data[2], I2C_WRITE) != 0){ - goto fail; - } - } - break; - } - case 'e':{ /* alter external limits: low, high, therm, offset */ - if(argc < 3){ - goto usage; - } - - /* low */ - if(I2CAccess(0xE, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &user_data[0], I2C_WRITE) != 0){ - goto fail; - } - - if(user_data_count > 1){ - /* high */ - if(I2CAccess(0xD, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &user_data[1], I2C_WRITE) != 0){ - goto fail; - } - } - - if(user_data_count > 2){ - /* therm */ - if(I2CAccess(0x19, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &user_data[2], I2C_WRITE) != 0){ - goto fail; - } - } - - if(user_data_count > 3){ - /* offset */ - if(I2CAccess(0x11, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &user_data[3], I2C_WRITE) != 0){ - goto fail; - } - } - break; - } - case 'c':{ /* alter config settings: config, conv, cons alert, therm hyst */ - if(argc < 3){ - goto usage; - } - - /* config */ - if(I2CAccess(0x9, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &user_data[0], I2C_WRITE) != 0){ - goto fail; - } - - if(user_data_count > 1){ - /* conversion */ - if(I2CAccess(0xA, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &user_data[1], I2C_WRITE) != 0){ - goto fail; - } - } - - if(user_data_count > 2){ - /* cons alert */ - if(I2CAccess(0x22, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &user_data[2], I2C_WRITE) != 0){ - goto fail; - } - } - - if(user_data_count > 3){ - /* therm hyst */ - if(I2CAccess(0x21, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &user_data[3], I2C_WRITE) != 0){ - goto fail; - } - } - break; - } - default:{ - goto usage; - } - } - - goto done; - fail: - printf("Access to sensor failed\n"); - ret_val = -1; - goto done; - usage: - printf ("Usage:\n%s\n", cmdtp->help); - - done: - return ret_val; +int do_temp_sensor (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + char cmd; + int ret_val = 0; + unsigned char temp_byte; + int temp; + int temp_low; + int low; + int low_low; + int high; + int high_low; + int therm; + unsigned char user_data[4] = { 0 }; + int user_data_count = 0; + int ii; + + if (argc > 1) { + cmd = argv[1][0]; + } else { + cmd = 's'; /* default to status */ + } + + user_data_count = argc - 2; + for (ii = 0; ii < user_data_count; ii++) { + user_data[ii] = simple_strtoul (argv[2 + ii], NULL, 0); + } + switch (cmd) { + case 's': + if (I2CAccess + (0x2, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, + &temp_byte, I2C_READ) != 0) { + goto fail; + } + printf ("Status : 0x%02x ", temp_byte); + if (temp_byte & TEMP_BUSY_BIT) + printf ("BUSY "); + + if (temp_byte & TEMP_LHIGH_BIT) + printf ("LHIGH "); + + if (temp_byte & TEMP_LLOW_BIT) + printf ("LLOW "); + + if (temp_byte & TEMP_EHIGH_BIT) + printf ("EHIGH "); + + if (temp_byte & TEMP_ELOW_BIT) + printf ("ELOW "); + + if (temp_byte & TEMP_OPEN_BIT) + printf ("OPEN "); + + if (temp_byte & TEMP_ETHERM_BIT) + printf ("ETHERM "); + + if (temp_byte & TEMP_LTHERM_BIT) + printf ("LTHERM"); + + printf ("\n"); + + if (I2CAccess + (0x3, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, + &temp_byte, I2C_READ) != 0) { + goto fail; + } + printf ("Config : 0x%02x ", temp_byte); + + if (I2CAccess + (0x4, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, + &temp_byte, I2C_READ) != 0) { + printf ("\n"); + goto fail; + } + printf ("Conversion: 0x%02x\n", temp_byte); + if (I2CAccess + (0x22, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, + &temp_byte, I2C_READ) != 0) { + goto fail; + } + printf ("Cons Alert: 0x%02x ", temp_byte); + + if (I2CAccess + (0x21, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, + &temp_byte, I2C_READ) != 0) { + printf ("\n"); + goto fail; + } + printf ("Therm Hyst: %d\n", temp_byte); + + if (I2CAccess + (0x0, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, + &temp_byte, I2C_READ) != 0) { + goto fail; + } + temp = temp_byte; + if (I2CAccess + (0x6, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, + &temp_byte, I2C_READ) != 0) { + goto fail; + } + low = temp_byte; + if (I2CAccess + (0x5, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, + &temp_byte, I2C_READ) != 0) { + goto fail; + } + high = temp_byte; + if (I2CAccess + (0x20, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, + &temp_byte, I2C_READ) != 0) { + goto fail; + } + therm = temp_byte; + printf ("Local Temp: %2d Low: %2d High: %2d THERM: %2d\n", temp, low, high, therm); + + if (I2CAccess + (0x1, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, + &temp_byte, I2C_READ) != 0) { + goto fail; + } + temp = temp_byte; + if (I2CAccess + (0x10, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, + &temp_byte, I2C_READ) != 0) { + goto fail; + } + temp_low = temp_byte; + if (I2CAccess + (0x8, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, + &temp_byte, I2C_READ) != 0) { + goto fail; + } + low = temp_byte; + if (I2CAccess + (0x14, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, + &temp_byte, I2C_READ) != 0) { + goto fail; + } + low_low = temp_byte; + if (I2CAccess + (0x7, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, + &temp_byte, I2C_READ) != 0) { + goto fail; + } + high = temp_byte; + if (I2CAccess + (0x13, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, + &temp_byte, I2C_READ) != 0) { + goto fail; + } + high_low = temp_byte; + if (I2CAccess + (0x19, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, + &temp_byte, I2C_READ) != 0) { + goto fail; + } + therm = temp_byte; + if (I2CAccess + (0x11, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, + &temp_byte, I2C_READ) != 0) { + goto fail; + } + printf ("Ext Temp : %2d.%03d Low: %2d.%03d High: %2d.%03d THERM: %2d Offset: %2d\n", temp, GET_DECIMAL (temp_low), low, GET_DECIMAL (low_low), high, GET_DECIMAL (high_low), therm, temp_byte); + break; + case 'l': /* alter local limits : low, high, therm */ + if (argc < 3) { + goto usage; + } + + /* low */ + if (I2CAccess + (0xC, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, + &user_data[0], I2C_WRITE) != 0) { + goto fail; + } + + if (user_data_count > 1) { + /* high */ + if (I2CAccess + (0xB, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, + &user_data[1], I2C_WRITE) != 0) { + goto fail; + } + } + + if (user_data_count > 2) { + /* therm */ + if (I2CAccess + (0x20, I2C_SENSOR_DEV, + I2C_SENSOR_CHIP_SEL, &user_data[2], + I2C_WRITE) != 0) { + goto fail; + } + } + break; + case 'e': /* alter external limits: low, high, therm, offset */ + if (argc < 3) { + goto usage; + } + + /* low */ + if (I2CAccess + (0xE, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, + &user_data[0], I2C_WRITE) != 0) { + goto fail; + } + + if (user_data_count > 1) { + /* high */ + if (I2CAccess + (0xD, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, + &user_data[1], I2C_WRITE) != 0) { + goto fail; + } + } + + if (user_data_count > 2) { + /* therm */ + if (I2CAccess + (0x19, I2C_SENSOR_DEV, + I2C_SENSOR_CHIP_SEL, &user_data[2], + I2C_WRITE) != 0) { + goto fail; + } + } + + if (user_data_count > 3) { + /* offset */ + if (I2CAccess + (0x11, I2C_SENSOR_DEV, + I2C_SENSOR_CHIP_SEL, &user_data[3], + I2C_WRITE) != 0) { + goto fail; + } + } + break; + case 'c': /* alter config settings: config, conv, cons alert, therm hyst */ + if (argc < 3) { + goto usage; + } + + /* config */ + if (I2CAccess + (0x9, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, + &user_data[0], I2C_WRITE) != 0) { + goto fail; + } + + if (user_data_count > 1) { + /* conversion */ + if (I2CAccess + (0xA, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, + &user_data[1], I2C_WRITE) != 0) { + goto fail; + } + } + + if (user_data_count > 2) { + /* cons alert */ + if (I2CAccess + (0x22, I2C_SENSOR_DEV, + I2C_SENSOR_CHIP_SEL, &user_data[2], + I2C_WRITE) != 0) { + goto fail; + } + } + + if (user_data_count > 3) { + /* therm hyst */ + if (I2CAccess + (0x21, I2C_SENSOR_DEV, + I2C_SENSOR_CHIP_SEL, &user_data[3], + I2C_WRITE) != 0) { + goto fail; + } + } + break; + default: + goto usage; + } + + goto done; +fail: + printf ("Access to sensor failed\n"); + ret_val = -1; + goto done; +usage: + printf ("Usage:\n%s\n", cmdtp->help); + +done: + return ret_val; } -U_BOOT_CMD( - temp, 6, 0, do_temp_sensor, - "temp - interact with the temperature sensor\n", - "temp [s]\n" - " - Show status.\n" - "temp l LOW [HIGH] [THERM]\n" - " - Set local limits.\n" - "temp e LOW [HIGH] [THERM] [OFFSET]\n" - " - Set external limits.\n" - "temp c CONFIG [CONVERSION] [CONS. ALERT] [THERM HYST]\n" - " - Set config options.\n" - "\n" - "All values can be decimal or hex (hex preceded with 0x).\n" - "Only whole numbers are supported for external limits.\n" -); +U_BOOT_CMD (temp, 6, 0, do_temp_sensor, + "temp - interact with the temperature sensor\n", + "temp [s]\n" + " - Show status.\n" + "temp l LOW [HIGH] [THERM]\n" + " - Set local limits.\n" + "temp e LOW [HIGH] [THERM] [OFFSET]\n" + " - Set external limits.\n" + "temp c CONFIG [CONVERSION] [CONS. ALERT] [THERM HYST]\n" + " - Set config options.\n" + "\n" + "All values can be decimal or hex (hex preceded with 0x).\n" + "Only whole numbers are supported for external limits.\n"); #if 0 -U_BOOT_CMD( - loadace, 2, 0, do_loadace, - "loadace - load fpga configuration from System ACE compact flash\n", - "N\n" - " - Load configuration N (0-7) from System ACE compact flash\n" - "loadace\n" - " - loads default configuration\n" -); +U_BOOT_CMD (loadace, 2, 0, do_loadace, + "loadace - load fpga configuration from System ACE compact flash\n", + "N\n" + " - Load configuration N (0-7) from System ACE compact flash\n" + "loadace\n" " - loads default configuration\n"); #endif -U_BOOT_CMD( - swconfig, 2, 0, do_swconfigbyte, - "swconfig- display or modify the software configuration byte\n", - "N [ADDRESS]\n" - " - set software configuration byte to N, optionally use ADDRESS as\n" - " location of buffer for flash copy\n" - "swconfig\n" - " - display software configuration byte\n" -); - -U_BOOT_CMD( - pause, 2, 0, do_pause, - "pause - sleep processor until any key is pressed with poll time of N seconds\n", - "N\n" - " - sleep processor until any key is pressed with poll time of N seconds\n" - "pause\n" - " - sleep processor until any key is pressed with poll time of 1 second\n" -); - -U_BOOT_CMD( - swrecon, 1, 0, do_swreconfig, - "swrecon - trigger a board reconfigure to the software selected configuration\n", - "\n" - " - trigger a board reconfigure to the software selected configuration\n" -); - +U_BOOT_CMD (swconfig, 2, 0, do_swconfigbyte, + "swconfig- display or modify the software configuration byte\n", + "N [ADDRESS]\n" + " - set software configuration byte to N, optionally use ADDRESS as\n" + " location of buffer for flash copy\n" + "swconfig\n" " - display software configuration byte\n"); + +U_BOOT_CMD (pause, 2, 0, do_pause, + "pause - sleep processor until any key is pressed with poll time of N seconds\n", + "N\n" + " - sleep processor until any key is pressed with poll time of N seconds\n" + "pause\n" + " - sleep processor until any key is pressed with poll time of 1 second\n"); + +U_BOOT_CMD (swrecon, 1, 0, do_swreconfig, + "swrecon - trigger a board reconfigure to the software selected configuration\n", + "\n" + " - trigger a board reconfigure to the software selected configuration\n"); diff --git a/board/amirix/ap1000/ap1000.h b/board/amirix/ap1000/ap1000.h index c93736f428..118c4d1b9a 100644 --- a/board/amirix/ap1000/ap1000.h +++ b/board/amirix/ap1000/ap1000.h @@ -20,22 +20,22 @@ */ #define AP1xx_FPGA_REV_ADDR 0x29000000 -#define AP1xx_PLATFORM_MASK 0xFF000000 -#define AP100_BASELINE_PLATFORM 0x01000000 -#define AP1xx_QUADGE_PLATFORM 0x02000000 -#define AP1xx_MGT_REF_PLATFORM 0x03000000 -#define AP1xx_STANDARD_PLATFORM 0x04000000 -#define AP1xx_DUAL_PLATFORM 0x05000000 +#define AP1xx_PLATFORM_MASK 0xFF000000 +#define AP100_BASELINE_PLATFORM 0x01000000 +#define AP1xx_QUADGE_PLATFORM 0x02000000 +#define AP1xx_MGT_REF_PLATFORM 0x03000000 +#define AP1xx_STANDARD_PLATFORM 0x04000000 +#define AP1xx_DUAL_PLATFORM 0x05000000 #define AP1xx_BASE_SRAM_PLATFORM 0x06000000 #define AP1000_BASELINE_PLATFORM 0x21000000 -#define AP1xx_TESTPLATFORM_MASK 0xC0000000 -#define AP1xx_PCI_PCB_TESTPLATFORM 0xC0000000 +#define AP1xx_TESTPLATFORM_MASK 0xC0000000 +#define AP1xx_PCI_PCB_TESTPLATFORM 0xC0000000 #define AP1xx_DUAL_GE_MEZZ_TESTPLATFORM 0xC1000000 -#define AP1xx_SFP_MEZZ_TESTPLATFORM 0xC2000000 +#define AP1xx_SFP_MEZZ_TESTPLATFORM 0xC2000000 -#define AP1000_PCI_PCB_TESTPLATFORM 0xC3000000 +#define AP1000_PCI_PCB_TESTPLATFORM 0xC3000000 #define AP1xx_TARGET_MASK 0x00FF0000 #define AP1xx_AP107_TARGET 0x00010000 @@ -46,18 +46,18 @@ #define AP1xx_UNKNOWN_STR "Unknown" -#define AP1xx_PLATFORM_STR " Platform" +#define AP1xx_PLATFORM_STR " Platform" #define AP1xx_BASELINE_PLATFORM_STR "Baseline" #define AP1xx_QUADGE_PLATFORM_STR "Quad GE" #define AP1xx_MGT_REF_PLATFORM_STR "MGT Reference" #define AP1xx_STANDARD_PLATFORM_STR "Standard" -#define AP1xx_DUAL_PLATFORM_STR "Dual" +#define AP1xx_DUAL_PLATFORM_STR "Dual" #define AP1xx_BASE_SRAM_PLATFORM_STR "Baseline with SRAM" -#define AP1xx_TESTPLATFORM_STR " Test Platform" -#define AP1xx_PCI_PCB_TESTPLATFORM_STR "Base" +#define AP1xx_TESTPLATFORM_STR " Test Platform" +#define AP1xx_PCI_PCB_TESTPLATFORM_STR "Base" #define AP1xx_DUAL_GE_MEZZ_TESTPLATFORM_STR "Dual GE Mezzanine" -#define AP1xx_SFP_MEZZ_TESTPLATFORM_STR "SFP Mezzanine" +#define AP1xx_SFP_MEZZ_TESTPLATFORM_STR "SFP Mezzanine" #define AP1xx_TARGET_STR " Board" #define AP1xx_AP107_TARGET_STR "AP107" @@ -78,84 +78,84 @@ */ #define AP1000_SYSACE_REGBASE 0x28000000 -#define SYSACE_STATREG0 0x04 // 7:0 -#define SYSACE_STATREG1 0x05 // 15:8 -#define SYSACE_STATREG2 0x06 // 23:16 -#define SYSACE_STATREG3 0x07 // 31:24 +#define SYSACE_STATREG0 0x04 /* 7:0 */ +#define SYSACE_STATREG1 0x05 /* 15:8 */ +#define SYSACE_STATREG2 0x06 /* 23:16 */ +#define SYSACE_STATREG3 0x07 /* 31:24 */ -#define SYSACE_ERRREG0 0x08 // 7:0 -#define SYSACE_ERRREG1 0x09 // 15:8 -#define SYSACE_ERRREG2 0x0a // 23:16 -#define SYSACE_ERRREG3 0x0b // 31:24 +#define SYSACE_ERRREG0 0x08 /* 7:0 */ +#define SYSACE_ERRREG1 0x09 /* 15:8 */ +#define SYSACE_ERRREG2 0x0a /* 23:16 */ +#define SYSACE_ERRREG3 0x0b /* 31:24 */ -#define SYSACE_CTRLREG0 0x18 // 7:0 -#define SYSACE_CTRLREG1 0x19 // 15:8 -#define SYSACE_CTRLREG2 0x1A // 23:16 -#define SYSACE_CTRLREG3 0x1B // 31:24 +#define SYSACE_CTRLREG0 0x18 /* 7:0 */ +#define SYSACE_CTRLREG1 0x19 /* 15:8 */ +#define SYSACE_CTRLREG2 0x1A /* 23:16 */ +#define SYSACE_CTRLREG3 0x1B /* 31:24 */ /* * Software reconfig thing */ -#define SW_BYTE_SECTOR_ADDR 0x24FE0000 -#define SW_BYTE_SECTOR_OFFSET 0x0001FFFF -#define SW_BYTE_SECTOR_SIZE 0x00020000 -#define SW_BYTE_MASK 0x00000003 +#define SW_BYTE_SECTOR_ADDR 0x24FE0000 +#define SW_BYTE_SECTOR_OFFSET 0x0001FFFF +#define SW_BYTE_SECTOR_SIZE 0x00020000 +#define SW_BYTE_MASK 0x00000003 -#define DEFAULT_TEMP_ADDR 0x00100000 +#define DEFAULT_TEMP_ADDR 0x00100000 -#define AP1000_CPLD_BASE 0x26000000 +#define AP1000_CPLD_BASE 0x26000000 /* PowerSpan II Stuff */ #define PSII_SYNC() asm("eieio") #define PSPAN_BASEADDR 0x30000000 -#define EEPROM_DEFAULT { 0x01, /* Byte 0 - Long Load = 0x02, short = 01, use 0xff for try no load */ \ - 0x0,0x0,0x0, /* Bytes 1 - 3 Power span reserved */ \ - 0x0, /* Byte 4 - Powerspan reserved - start of short load */ \ - 0x0F, /* Byte 5 - Enable PCI 1 & 2 as Bus masters and Memory targets. */ \ - 0x0E, /* Byte 6 - PCI 1 Target image prefetch - on for image 0,1,2, off for i20 & 3. */ \ - 0x00, 0x00, /* Byte 7,8 - PCI-1 Subsystem ID - */ \ - 0x00, 0x00, /* Byte 9,10 - PCI-1 Subsystem Vendor Id - */ \ - 0x00, /* Byte 11 - No PCI interrupt generation on PCI-1 PCI-2 int A */ \ - 0x1F, /* Byte 12 - PCI-1 enable bridge registers, all target images */ \ - 0xBA, /* Byte 13 - Target 0 image 128 Meg(Ram), Target 1 image 64 Meg. (config Flash/CPLD )*/ \ - 0xA0, /* Byte 14 - Target 2 image 64 Meg(program Flash), target 3 64k. */ \ - 0x00, /* Byte 15 - Vital Product Data Disabled. */ \ - 0x88, /* Byte 16 - PCI arbiter config complete, all requests routed through PCI-1, Unlock PCI-1 */ \ - 0x40, /* Byte 17 - Interrupt direction control - PCI-1 Int A out, everything else in. */ \ - 0x00, /* Byte 18 - I2O disabled */ \ - 0x00, /* Byte 19 - PCI-2 Target image prefetch - off for all images. */ \ - 0x00,0x00, /* Bytes 20,21 - PCI 2 Subsystem Id */ \ - 0x00,0x00, /* Bytes 22,23 - PCI 2 Subsystem Vendor id */ \ - 0x0C, /* Byte 24 - PCI-2 BAR enables, target image 0, & 1 */ \ - 0xBB, /* Byte 25 - PCI-2 target 0 - 128 Meg(Ram), target 1 - 128 Meg (program/config flash) */ \ - 0x00, /* Byte 26 - PCI-2 target 2 & 3 unused. */ \ - 0x00,0x00,0x00,0x00,0x00, /* Bytes 27,28,29,30, 31 - Reserved */ \ - /* Long Load Information */ \ - 0x82,0x60, /* Bytes 32,33 - PCI-1 Device ID - Powerspan II */ \ - 0x10,0xE3, /* Bytes 24,35 - PCI-1 Vendor ID - Tundra */ \ - 0x06, /* Byte 36 - PCI-1 Class Base - Bridge device. */ \ - 0x80, /* Byte 37 - PCI-1 Class sub class - Other bridge. */ \ - 0x00, /* Byte 38 - PCI-1 Class programing interface - Other bridge */ \ - 0x01, /* Byte 39 - Power span revision 1. */ \ - 0x6E, /* Byte 40 - PB SI0 enabled, translation enabled, decode enabled, 64 Meg */ \ - 0x40, /* Byte 41 - PB SI0 memory command mode, PCI-1 dest */ \ - 0x22, /* Byte 42 - Prefetch discard after read, PCI-little endian conversion, 32 byte prefetch */ \ - 0x00,0x00, /* Bytes 43, 44 - Translation address for SI0, set to zero for now. */ \ - 0x0E, /* Byte 45 - Translation address (0) and PB bus master enables - all. */ \ - 0x2c,00,00, /* Bytes 46,47,48 - PB SI0 processor base address - 0x2C000000 */ \ - 0x30,00,00, /* Bytes 49,50,51 - PB Address for Powerspan registers - 0x30000000, big Endian */ \ - 0x82,0x60, /* Bytes 52, 53 - PCI-2 Device ID - Powerspan II */ \ - 0x10,0xE3, /* Bytes 54,55 - PCI 2 Vendor Id - Tundra */ \ - 0x06, /* Byte 56 - PCI-2 Class Base - Bridge device */ \ - 0x80, /* Byte 57 - PCI-2 Class sub class - Other Bridge. */ \ - 0x00, /* Byte 58 - PCI-2 class programming interface - Other bridge */ \ - 0x01, /* Byte 59 - PCI-2 class revision 1 */ \ - 0x00,0x00,0x00,0x00 }; /* Bytes 60,61, 62, 63 - Powerspan reserved */ - - -#define EEPROM_LENGTH 64 /* Long Load */ - -#define I2C_SENSOR_DEV 0x9 +#define EEPROM_DEFAULT { 0x01, /* Byte 0 - Long Load = 0x02, short = 01, use 0xff for try no load */ \ + 0x0,0x0,0x0, /* Bytes 1 - 3 Power span reserved */ \ + 0x0, /* Byte 4 - Powerspan reserved - start of short load */ \ + 0x0F, /* Byte 5 - Enable PCI 1 & 2 as Bus masters and Memory targets. */ \ + 0x0E, /* Byte 6 - PCI 1 Target image prefetch - on for image 0,1,2, off for i20 & 3. */ \ + 0x00, 0x00, /* Byte 7,8 - PCI-1 Subsystem ID - */ \ + 0x00, 0x00, /* Byte 9,10 - PCI-1 Subsystem Vendor Id - */ \ + 0x00, /* Byte 11 - No PCI interrupt generation on PCI-1 PCI-2 int A */ \ + 0x1F, /* Byte 12 - PCI-1 enable bridge registers, all target images */ \ + 0xBA, /* Byte 13 - Target 0 image 128 Meg(Ram), Target 1 image 64 Meg. (config Flash/CPLD )*/ \ + 0xA0, /* Byte 14 - Target 2 image 64 Meg(program Flash), target 3 64k. */ \ + 0x00, /* Byte 15 - Vital Product Data Disabled. */ \ + 0x88, /* Byte 16 - PCI arbiter config complete, all requests routed through PCI-1, Unlock PCI-1 */ \ + 0x40, /* Byte 17 - Interrupt direction control - PCI-1 Int A out, everything else in. */ \ + 0x00, /* Byte 18 - I2O disabled */ \ + 0x00, /* Byte 19 - PCI-2 Target image prefetch - off for all images. */ \ + 0x00,0x00, /* Bytes 20,21 - PCI 2 Subsystem Id */ \ + 0x00,0x00, /* Bytes 22,23 - PCI 2 Subsystem Vendor id */ \ + 0x0C, /* Byte 24 - PCI-2 BAR enables, target image 0, & 1 */ \ + 0xBB, /* Byte 25 - PCI-2 target 0 - 128 Meg(Ram), target 1 - 128 Meg (program/config flash) */ \ + 0x00, /* Byte 26 - PCI-2 target 2 & 3 unused. */ \ + 0x00,0x00,0x00,0x00,0x00, /* Bytes 27,28,29,30, 31 - Reserved */ \ + /* Long Load Information */ \ + 0x82,0x60, /* Bytes 32,33 - PCI-1 Device ID - Powerspan II */ \ + 0x10,0xE3, /* Bytes 24,35 - PCI-1 Vendor ID - Tundra */ \ + 0x06, /* Byte 36 - PCI-1 Class Base - Bridge device. */ \ + 0x80, /* Byte 37 - PCI-1 Class sub class - Other bridge. */ \ + 0x00, /* Byte 38 - PCI-1 Class programing interface - Other bridge */ \ + 0x01, /* Byte 39 - Power span revision 1. */ \ + 0x6E, /* Byte 40 - PB SI0 enabled, translation enabled, decode enabled, 64 Meg */ \ + 0x40, /* Byte 41 - PB SI0 memory command mode, PCI-1 dest */ \ + 0x22, /* Byte 42 - Prefetch discard after read, PCI-little endian conversion, 32 byte prefetch */ \ + 0x00,0x00, /* Bytes 43, 44 - Translation address for SI0, set to zero for now. */ \ + 0x0E, /* Byte 45 - Translation address (0) and PB bus master enables - all. */ \ + 0x2c,00,00, /* Bytes 46,47,48 - PB SI0 processor base address - 0x2C000000 */ \ + 0x30,00,00, /* Bytes 49,50,51 - PB Address for Powerspan registers - 0x30000000, big Endian */ \ + 0x82,0x60, /* Bytes 52, 53 - PCI-2 Device ID - Powerspan II */ \ + 0x10,0xE3, /* Bytes 54,55 - PCI 2 Vendor Id - Tundra */ \ + 0x06, /* Byte 56 - PCI-2 Class Base - Bridge device */ \ + 0x80, /* Byte 57 - PCI-2 Class sub class - Other Bridge. */ \ + 0x00, /* Byte 58 - PCI-2 class programming interface - Other bridge */ \ + 0x01, /* Byte 59 - PCI-2 class revision 1 */ \ + 0x00,0x00,0x00,0x00 }; /* Bytes 60,61, 62, 63 - Powerspan reserved */ + + +#define EEPROM_LENGTH 64 /* Long Load */ + +#define I2C_SENSOR_DEV 0x9 #define I2C_SENSOR_CHIP_SEL 0x4 /* diff --git a/board/amirix/ap1000/flash.c b/board/amirix/ap1000/flash.c index f07edf0e16..1a3b25218c 100644 --- a/board/amirix/ap1000/flash.c +++ b/board/amirix/ap1000/flash.c @@ -94,275 +94,273 @@ #define FLASH_OFFSET_USER_PROTECTION 0x85 #define FLASH_OFFSET_INTEL_PROTECTION 0x81 - #define FLASH_MAN_CFI 0x01000000 - - - typedef union { - unsigned char c; - unsigned short w; - unsigned long l; + unsigned char c; + unsigned short w; + unsigned long l; } cfiword_t; typedef union { - unsigned char * cp; - unsigned short *wp; - unsigned long *lp; + unsigned char *cp; + unsigned short *wp; + unsigned long *lp; } cfiptr_t; #define NUM_ERASE_REGIONS 4 -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ - +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ /*----------------------------------------------------------------------- * Functions */ - - -static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c); -static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf); -static void flash_write_cmd(flash_info_t * info, int sect, uchar offset, uchar cmd); -static int flash_isequal(flash_info_t * info, int sect, uchar offset, uchar cmd); -static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd); -static int flash_detect_cfi(flash_info_t * info); +static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c); +static void flash_make_cmd (flash_info_t * info, uchar cmd, void *cmdbuf); +static void flash_write_cmd (flash_info_t * info, int sect, uchar offset, + uchar cmd); +static int flash_isequal (flash_info_t * info, int sect, uchar offset, + uchar cmd); +static int flash_isset (flash_info_t * info, int sect, uchar offset, + uchar cmd); +static int flash_detect_cfi (flash_info_t * info); static ulong flash_get_size (ulong base, int banknum); -static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword); -static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt); +static int flash_write_cfiword (flash_info_t * info, ulong dest, + cfiword_t cword); +static int flash_full_status_check (flash_info_t * info, ulong sector, + ulong tout, char *prompt); #ifdef CFG_FLASH_USE_BUFFER_WRITE -static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len); +static int flash_write_cfibuffer (flash_info_t * info, ulong dest, uchar * cp, + int len); #endif /*----------------------------------------------------------------------- * create an address based on the offset and the port width */ -uchar * flash_make_addr(flash_info_t * info, int sect, int offset) +uchar *flash_make_addr (flash_info_t * info, int sect, int offset) { - return ((uchar *)(info->start[sect] + (offset * info->chipwidth))); + return ((uchar *) (info->start[sect] + (offset * info->chipwidth))); } + /*----------------------------------------------------------------------- * read a character at a port width address */ -uchar flash_read_uchar(flash_info_t * info, uchar offset) +uchar flash_read_uchar (flash_info_t * info, uchar offset) { - if (info->portwidth == FLASH_CFI_8BIT) { - volatile uchar *cp; - uchar c; - cp = flash_make_addr(info, 0, offset); - c = *cp; + if (info->portwidth == FLASH_CFI_8BIT) { + volatile uchar *cp; + uchar c; + + cp = flash_make_addr (info, 0, offset); + c = *cp; #ifdef DEBUG_FLASH - printf("flash_read_uchar offset=%04x ptr=%08x c=%02x\n", - offset, (unsigned int)cp, c); + printf ("flash_read_uchar offset=%04x ptr=%08x c=%02x\n", + offset, (unsigned int) cp, c); #endif - return (c); - - } else if (info->portwidth == FLASH_CFI_16BIT) { - volatile ushort *sp; - ushort s; - uchar c; - sp = (ushort*)flash_make_addr(info, 0, offset); - s = *sp; - c = (uchar)s; + return (c); + + } else if (info->portwidth == FLASH_CFI_16BIT) { + volatile ushort *sp; + ushort s; + uchar c; + + sp = (ushort *) flash_make_addr (info, 0, offset); + s = *sp; + c = (uchar) s; #ifdef DEBUG_FLASH - printf("flash_read_uchar offset=%04x ptr=%08x s=%04x c=%02x\n", - offset, (unsigned int)sp, s, c); + printf ("flash_read_uchar offset=%04x ptr=%08x s=%04x c=%02x\n", offset, (unsigned int) sp, s, c); #endif - return (c); + return (c); - } + } - return 0; + return 0; } /*----------------------------------------------------------------------- * read a short word by swapping for ppc format. */ -ushort flash_read_ushort(flash_info_t * info, int sect, uchar offset) +ushort flash_read_ushort (flash_info_t * info, int sect, uchar offset) { - if (info->portwidth == FLASH_CFI_8BIT) { - volatile uchar *cp; - uchar c0, c1; - ushort s; - cp = flash_make_addr(info, 0, offset); - c1 = cp[2]; - c0 = cp[0]; - s = c1<<8 | c0; + if (info->portwidth == FLASH_CFI_8BIT) { + volatile uchar *cp; + uchar c0, c1; + ushort s; + + cp = flash_make_addr (info, 0, offset); + c1 = cp[2]; + c0 = cp[0]; + s = c1 << 8 | c0; #ifdef DEBUG_FLASH - printf("flash_read_ushort offset=%04x ptr=%08x c1=%02x c0=%02x s=%04x\n", - offset, (unsigned int)cp, c1, c0, s); + printf ("flash_read_ushort offset=%04x ptr=%08x c1=%02x c0=%02x s=%04x\n", offset, (unsigned int) cp, c1, c0, s); #endif - return (s); - - } else if (info->portwidth == FLASH_CFI_16BIT) { - volatile ushort *sp; - ushort s; - uchar c0, c1; - sp = (ushort*)flash_make_addr(info, 0, offset); - s = *sp; - c1 = (uchar)sp[1]; - c0 = (uchar)sp[0]; - s = c1<<8 | c0; + return (s); + + } else if (info->portwidth == FLASH_CFI_16BIT) { + volatile ushort *sp; + ushort s; + uchar c0, c1; + + sp = (ushort *) flash_make_addr (info, 0, offset); + s = *sp; + c1 = (uchar) sp[1]; + c0 = (uchar) sp[0]; + s = c1 << 8 | c0; #ifdef DEBUG_FLASH - printf("flash_read_ushort offset=%04x ptr=%08x c1=%02x c0=%02x s=%04x\n", - offset, (unsigned int)sp, c1, c0, s); + printf ("flash_read_ushort offset=%04x ptr=%08x c1=%02x c0=%02x s=%04x\n", offset, (unsigned int) sp, c1, c0, s); #endif - return (s); + return (s); - } + } - return 0; + return 0; } /*----------------------------------------------------------------------- * read a long word by picking the least significant byte of each maiximum * port size word. Swap for ppc format. */ -ulong flash_read_long(flash_info_t * info, int sect, uchar offset) +ulong flash_read_long (flash_info_t * info, int sect, uchar offset) { - if (info->portwidth == FLASH_CFI_8BIT) { - volatile uchar *cp; - uchar c0, c1, c2, c3; - ulong l; - cp = flash_make_addr(info, 0, offset); - c3 = cp[6]; - c2 = cp[4]; - c1 = cp[2]; - c0 = cp[0]; - l = c3<<24 | c2<<16 | c1<<8 | c0; + if (info->portwidth == FLASH_CFI_8BIT) { + volatile uchar *cp; + uchar c0, c1, c2, c3; + ulong l; + + cp = flash_make_addr (info, 0, offset); + c3 = cp[6]; + c2 = cp[4]; + c1 = cp[2]; + c0 = cp[0]; + l = c3 << 24 | c2 << 16 | c1 << 8 | c0; #ifdef DEBUG_FLASH - printf("flash_read_long offset=%04x ptr=%08x c3=%02x c2=%02x c1=%02x c0=%02x l=%08x\n", - offset, (unsigned int)cp, c3, c2, c1, c0, l); + printf ("flash_read_long offset=%04x ptr=%08x c3=%02x c2=%02x c1=%02x c0=%02x l=%08x\n", offset, (unsigned int) cp, c3, c2, c1, c0, l); #endif - return (l); - - } else if (info->portwidth == FLASH_CFI_16BIT) { - volatile ushort *sp; - uchar c0, c1, c2, c3; - ulong l; - sp = (ushort*)flash_make_addr(info, 0, offset); - c3 = (uchar)sp[3]; - c2 = (uchar)sp[2]; - c1 = (uchar)sp[1]; - c0 = (uchar)sp[0]; - l = c3<<24 | c2<<16 | c1<<8 | c0; + return (l); + + } else if (info->portwidth == FLASH_CFI_16BIT) { + volatile ushort *sp; + uchar c0, c1, c2, c3; + ulong l; + + sp = (ushort *) flash_make_addr (info, 0, offset); + c3 = (uchar) sp[3]; + c2 = (uchar) sp[2]; + c1 = (uchar) sp[1]; + c0 = (uchar) sp[0]; + l = c3 << 24 | c2 << 16 | c1 << 8 | c0; #ifdef DEBUG_FLASH - printf("flash_read_long offset=%04x ptr=%08x c3=%02x c2=%02x c1=%02x c0=%02x l=%08x\n", - offset, (unsigned int)sp, c3, c2, c1, c0, l); + printf ("flash_read_long offset=%04x ptr=%08x c3=%02x c2=%02x c1=%02x c0=%02x l=%08x\n", offset, (unsigned int) sp, c3, c2, c1, c0, l); #endif - return (l); + return (l); - } + } - return 0; + return 0; } /*----------------------------------------------------------------------- */ unsigned long flash_init (void) { - unsigned long size; - - size = 0; - - flash_info[0].flash_id = FLASH_UNKNOWN; - flash_info[0].portwidth = FLASH_CFI_16BIT; - flash_info[0].chipwidth = FLASH_CFI_16BIT; - size += flash_info[0].size = flash_get_size(CFG_PROGFLASH_BASE, 0); - if (flash_info[0].flash_id == FLASH_UNKNOWN) { - printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", 1, - flash_info[0].size, flash_info[0].size<<20); - }; - - flash_info[1].flash_id = FLASH_UNKNOWN; - flash_info[1].portwidth = FLASH_CFI_8BIT; - flash_info[1].chipwidth = FLASH_CFI_16BIT; - size += flash_info[1].size = flash_get_size(CFG_CONFFLASH_BASE, 1); - if (flash_info[1].flash_id == FLASH_UNKNOWN) { - printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", 2, - flash_info[1].size, flash_info[1].size<<20); - }; - - return (size); + unsigned long size; + + size = 0; + + flash_info[0].flash_id = FLASH_UNKNOWN; + flash_info[0].portwidth = FLASH_CFI_16BIT; + flash_info[0].chipwidth = FLASH_CFI_16BIT; + size += flash_info[0].size = flash_get_size (CFG_PROGFLASH_BASE, 0); + if (flash_info[0].flash_id == FLASH_UNKNOWN) { + printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", 1, flash_info[0].size, flash_info[0].size << 20); + }; + + flash_info[1].flash_id = FLASH_UNKNOWN; + flash_info[1].portwidth = FLASH_CFI_8BIT; + flash_info[1].chipwidth = FLASH_CFI_16BIT; + size += flash_info[1].size = flash_get_size (CFG_CONFFLASH_BASE, 1); + if (flash_info[1].flash_id == FLASH_UNKNOWN) { + printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", 2, flash_info[1].size, flash_info[1].size << 20); + }; + + return (size); } /*----------------------------------------------------------------------- */ -int flash_erase (flash_info_t *info, int s_first, int s_last) +int flash_erase (flash_info_t * info, int s_first, int s_last) { - int rcode = 0; - int prot; - int sect; - - if( info->flash_id != FLASH_MAN_CFI) { - printf ("Can't erase unknown flash type - aborted\n"); - return 1; - } - if ((s_first < 0) || (s_first > s_last)) { - printf ("- no sectors to erase\n"); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - flash_write_cmd(info, sect, 0, FLASH_CMD_CLEAR_STATUS); - flash_write_cmd(info, sect, 0, FLASH_CMD_BLOCK_ERASE); - flash_write_cmd(info, sect, 0, FLASH_CMD_ERASE_CONFIRM); - - if(flash_full_status_check(info, sect, info->erase_blk_tout, "erase")) { - rcode = 1; - } else - printf("."); - } - } - printf (" done\n"); - return rcode; + int rcode = 0; + int prot; + int sect; + + if (info->flash_id != FLASH_MAN_CFI) { + printf ("Can't erase unknown flash type - aborted\n"); + return 1; + } + if ((s_first < 0) || (s_first > s_last)) { + printf ("- no sectors to erase\n"); + return 1; + } + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + if (prot) { + printf ("- Warning: %d protected sectors will not be erased!\n", prot); + } else { + printf ("\n"); + } + + for (sect = s_first; sect <= s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + flash_write_cmd (info, sect, 0, + FLASH_CMD_CLEAR_STATUS); + flash_write_cmd (info, sect, 0, + FLASH_CMD_BLOCK_ERASE); + flash_write_cmd (info, sect, 0, + FLASH_CMD_ERASE_CONFIRM); + + if (flash_full_status_check + (info, sect, info->erase_blk_tout, "erase")) { + rcode = 1; + } else + printf ("."); + } + } + printf (" done\n"); + return rcode; } /*----------------------------------------------------------------------- */ -void flash_print_info (flash_info_t *info) +void flash_print_info (flash_info_t * info) { - int i; - - if (info->flash_id != FLASH_MAN_CFI) { - printf ("missing or unknown FLASH type\n"); - return; - } - - printf("CFI conformant FLASH (x%d device in x%d mode)", - (info->chipwidth << 3 ), (info->portwidth << 3 )); - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - printf(" Erase timeout %ld ms, write timeout %ld ms, buffer write timeout %ld ms, buffer size %d\n", - info->erase_blk_tout, info->write_tout, info->buffer_write_tout, info->buffer_size); - - printf (" Sector Start Addresses:"); - for (i=0; isector_count; ++i) { - if ((i % 5) == 0) - printf ("\n"); - printf (" %08lX%5s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); - return; + int i; + + if (info->flash_id != FLASH_MAN_CFI) { + printf ("missing or unknown FLASH type\n"); + return; + } + + printf ("CFI conformant FLASH (x%d device in x%d mode)", + (info->chipwidth << 3), (info->portwidth << 3)); + printf (" Size: %ld MB in %d Sectors\n", + info->size >> 20, info->sector_count); + printf (" Erase timeout %ld ms, write timeout %ld ms, buffer write timeout %ld ms, buffer size %d\n", info->erase_blk_tout, info->write_tout, info->buffer_write_tout, info->buffer_size); + + printf (" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; ++i) { + if ((i % 5) == 0) + printf ("\n"); + printf (" %08lX%5s", + info->start[i], info->protect[i] ? " (RO)" : " "); + } + printf ("\n"); + return; } /*----------------------------------------------------------------------- @@ -371,260 +369,281 @@ void flash_print_info (flash_info_t *info) * 1 - write timeout * 2 - Flash not erased */ -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) +int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) { - ulong wp; - ulong cp; - int aln; - cfiword_t cword; - int i, rc; - - /* get lower aligned address */ - wp = (addr & ~(info->portwidth - 1)); - - /* handle unaligned start */ - if((aln = addr - wp) != 0) { - cword.l = 0; - cp = wp; - for(i=0;iportwidth) && (cnt > 0) ; i++) { - flash_add_byte(info, &cword, *src++); - cnt--; - cp++; - } - for(; (cnt == 0) && (i < info->portwidth); ++i, ++cp) - flash_add_byte(info, &cword, (*(uchar *)cp)); - if((rc = flash_write_cfiword(info, wp, cword)) != 0) - return rc; - wp = cp; - } - + ulong wp; + ulong cp; + int aln; + cfiword_t cword; + int i, rc; + + /* get lower aligned address */ + wp = (addr & ~(info->portwidth - 1)); + + /* handle unaligned start */ + if ((aln = addr - wp) != 0) { + cword.l = 0; + cp = wp; + for (i = 0; i < aln; ++i, ++cp) + flash_add_byte (info, &cword, (*(uchar *) cp)); + + for (; (i < info->portwidth) && (cnt > 0); i++) { + flash_add_byte (info, &cword, *src++); + cnt--; + cp++; + } + for (; (cnt == 0) && (i < info->portwidth); ++i, ++cp) + flash_add_byte (info, &cword, (*(uchar *) cp)); + if ((rc = flash_write_cfiword (info, wp, cword)) != 0) + return rc; + wp = cp; + } #ifdef CFG_FLASH_USE_BUFFER_WRITE - while(cnt >= info->portwidth) { - i = info->buffer_size > cnt? cnt: info->buffer_size; - if((rc = flash_write_cfibuffer(info, wp, src,i)) != ERR_OK) - return rc; - wp += i; - src += i; - cnt -=i; - } + while (cnt >= info->portwidth) { + i = info->buffer_size > cnt ? cnt : info->buffer_size; + if ((rc = flash_write_cfibuffer (info, wp, src, i)) != ERR_OK) + return rc; + wp += i; + src += i; + cnt -= i; + } #else - /* handle the aligned part */ - while(cnt >= info->portwidth) { - cword.l = 0; - for(i = 0; i < info->portwidth; i++) { - flash_add_byte(info, &cword, *src++); - } - if((rc = flash_write_cfiword(info, wp, cword)) != 0) - return rc; - wp += info->portwidth; - cnt -= info->portwidth; - } + /* handle the aligned part */ + while (cnt >= info->portwidth) { + cword.l = 0; + for (i = 0; i < info->portwidth; i++) { + flash_add_byte (info, &cword, *src++); + } + if ((rc = flash_write_cfiword (info, wp, cword)) != 0) + return rc; + wp += info->portwidth; + cnt -= info->portwidth; + } #endif /* CFG_FLASH_USE_BUFFER_WRITE */ - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - cword.l = 0; - for (i=0, cp=wp; (iportwidth) && (cnt>0); ++i, ++cp) { - flash_add_byte(info, &cword, *src++); - --cnt; - } - for (; iportwidth; ++i, ++cp) { - flash_add_byte(info, & cword, (*(uchar *)cp)); - } - - return flash_write_cfiword(info, wp, cword); + if (cnt == 0) { + return (0); + } + + /* + * handle unaligned tail bytes + */ + cword.l = 0; + for (i = 0, cp = wp; (i < info->portwidth) && (cnt > 0); ++i, ++cp) { + flash_add_byte (info, &cword, *src++); + --cnt; + } + for (; i < info->portwidth; ++i, ++cp) { + flash_add_byte (info, &cword, (*(uchar *) cp)); + } + + return flash_write_cfiword (info, wp, cword); } /*----------------------------------------------------------------------- */ -int flash_real_protect(flash_info_t *info, long sector, int prot) +int flash_real_protect (flash_info_t * info, long sector, int prot) { - int retcode = 0; - - flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS); - flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT); - if(prot) - flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_SET); - else - flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_CLEAR); - - if((retcode = flash_full_status_check(info, sector, info->erase_blk_tout, - prot?"protect":"unprotect")) == 0) { - - info->protect[sector] = prot; - /* Intel's unprotect unprotects all locking */ - if(prot == 0) { - int i; - for(i = 0 ; isector_count; i++) { - if(info->protect[i]) - flash_real_protect(info, i, 1); - } - } - } - - return retcode; + int retcode = 0; + + flash_write_cmd (info, sector, 0, FLASH_CMD_CLEAR_STATUS); + flash_write_cmd (info, sector, 0, FLASH_CMD_PROTECT); + if (prot) + flash_write_cmd (info, sector, 0, FLASH_CMD_PROTECT_SET); + else + flash_write_cmd (info, sector, 0, FLASH_CMD_PROTECT_CLEAR); + + if ((retcode = + flash_full_status_check (info, sector, info->erase_blk_tout, + prot ? "protect" : "unprotect")) == 0) { + + info->protect[sector] = prot; + /* Intel's unprotect unprotects all locking */ + if (prot == 0) { + int i; + + for (i = 0; i < info->sector_count; i++) { + if (info->protect[i]) + flash_real_protect (info, i, 1); + } + } + } + + return retcode; } + /*----------------------------------------------------------------------- * wait for XSR.7 to be set. Time out with an error if it does not. * This routine does not set the flash to read-array mode. */ -static int flash_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt) +static int flash_status_check (flash_info_t * info, ulong sector, ulong tout, + char *prompt) { - ulong start; - - /* Wait for command completion */ - start = get_timer (0); - while(!flash_isset(info, sector, 0, FLASH_STATUS_DONE)) { - if (get_timer(start) > info->erase_blk_tout) { - printf("Flash %s timeout at address %lx\n", prompt, info->start[sector]); - flash_write_cmd(info, sector, 0, FLASH_CMD_RESET); - return ERR_TIMOUT; - } - } - return ERR_OK; + ulong start; + + /* Wait for command completion */ + start = get_timer (0); + while (!flash_isset (info, sector, 0, FLASH_STATUS_DONE)) { + if (get_timer (start) > info->erase_blk_tout) { + printf ("Flash %s timeout at address %lx\n", prompt, + info->start[sector]); + flash_write_cmd (info, sector, 0, FLASH_CMD_RESET); + return ERR_TIMOUT; + } + } + return ERR_OK; } + /*----------------------------------------------------------------------- * Wait for XSR.7 to be set, if it times out print an error, otherwise do a full status check. * This routine sets the flash to read-array mode. */ -static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt) +static int flash_full_status_check (flash_info_t * info, ulong sector, + ulong tout, char *prompt) { - int retcode; - retcode = flash_status_check(info, sector, tout, prompt); - if((retcode == ERR_OK) && !flash_isequal(info,sector, 0, FLASH_STATUS_DONE)) { - retcode = ERR_INVAL; - printf("Flash %s error at address %lx\n", prompt,info->start[sector]); - if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS | FLASH_STATUS_PSLBS)){ - printf("Command Sequence Error.\n"); - } else if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS)){ - printf("Block Erase Error.\n"); - retcode = ERR_NOT_ERASED; - } else if (flash_isset(info, sector, 0, FLASH_STATUS_PSLBS)) { - printf("Locking Error\n"); - } - if(flash_isset(info, sector, 0, FLASH_STATUS_DPS)){ - printf("Block locked.\n"); - retcode = ERR_PROTECTED; - } - if(flash_isset(info, sector, 0, FLASH_STATUS_VPENS)) - printf("Vpp Low Error.\n"); - } - flash_write_cmd(info, sector, 0, FLASH_CMD_RESET); - return retcode; + int retcode; + + retcode = flash_status_check (info, sector, tout, prompt); + if ((retcode == ERR_OK) + && !flash_isequal (info, sector, 0, FLASH_STATUS_DONE)) { + retcode = ERR_INVAL; + printf ("Flash %s error at address %lx\n", prompt, + info->start[sector]); + if (flash_isset + (info, sector, 0, + FLASH_STATUS_ECLBS | FLASH_STATUS_PSLBS)) { + printf ("Command Sequence Error.\n"); + } else if (flash_isset (info, sector, 0, FLASH_STATUS_ECLBS)) { + printf ("Block Erase Error.\n"); + retcode = ERR_NOT_ERASED; + } else if (flash_isset (info, sector, 0, FLASH_STATUS_PSLBS)) { + printf ("Locking Error\n"); + } + if (flash_isset (info, sector, 0, FLASH_STATUS_DPS)) { + printf ("Block locked.\n"); + retcode = ERR_PROTECTED; + } + if (flash_isset (info, sector, 0, FLASH_STATUS_VPENS)) + printf ("Vpp Low Error.\n"); + } + flash_write_cmd (info, sector, 0, FLASH_CMD_RESET); + return retcode; } + /*----------------------------------------------------------------------- */ -static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c) +static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c) { - switch(info->portwidth) { - case FLASH_CFI_8BIT: - cword->c = c; - break; - case FLASH_CFI_16BIT: - cword->w = (cword->w << 8) | c; - break; - case FLASH_CFI_32BIT: - cword->l = (cword->l << 8) | c; - } + switch (info->portwidth) { + case FLASH_CFI_8BIT: + cword->c = c; + break; + case FLASH_CFI_16BIT: + cword->w = (cword->w << 8) | c; + break; + case FLASH_CFI_32BIT: + cword->l = (cword->l << 8) | c; + } } - /*----------------------------------------------------------------------- * make a proper sized command based on the port and chip widths */ -static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf) +static void flash_make_cmd (flash_info_t * info, uchar cmd, void *cmdbuf) { - //int i; - uchar *cp = (uchar *)cmdbuf; - // for(i=0; i< info->portwidth; i++) - // *cp++ = ((i+1) % info->chipwidth) ? '\0':cmd; - if (info->portwidth == FLASH_CFI_8BIT && info->chipwidth == FLASH_CFI_16BIT) { - cp[0] = cmd; - } else if (info->portwidth == FLASH_CFI_16BIT && info->chipwidth == FLASH_CFI_16BIT) { - cp[0] = '\0'; - cp[1] = cmd; - }; + /*int i; */ + uchar *cp = (uchar *) cmdbuf; + + /* for(i=0; i< info->portwidth; i++) */ + /* *cp++ = ((i+1) % info->chipwidth) ? '\0':cmd; */ + if (info->portwidth == FLASH_CFI_8BIT + && info->chipwidth == FLASH_CFI_16BIT) { + cp[0] = cmd; + } else if (info->portwidth == FLASH_CFI_16BIT + && info->chipwidth == FLASH_CFI_16BIT) { + cp[0] = '\0'; + cp[1] = cmd; + }; } /* * Write a proper sized command to the correct address */ -static void flash_write_cmd(flash_info_t * info, int sect, uchar offset, uchar cmd) +static void flash_write_cmd (flash_info_t * info, int sect, uchar offset, + uchar cmd) { - volatile cfiptr_t addr; - cfiword_t cword; - addr.cp = flash_make_addr(info, sect, offset); - flash_make_cmd(info, cmd, &cword); - switch(info->portwidth) { - case FLASH_CFI_8BIT: - *addr.cp = cword.c; - break; - case FLASH_CFI_16BIT: - *addr.wp = cword.w; - break; - case FLASH_CFI_32BIT: - *addr.lp = cword.l; - break; - } + volatile cfiptr_t addr; + cfiword_t cword; + + addr.cp = flash_make_addr (info, sect, offset); + flash_make_cmd (info, cmd, &cword); + switch (info->portwidth) { + case FLASH_CFI_8BIT: + *addr.cp = cword.c; + break; + case FLASH_CFI_16BIT: + *addr.wp = cword.w; + break; + case FLASH_CFI_32BIT: + *addr.lp = cword.l; + break; + } } /*----------------------------------------------------------------------- */ -static int flash_isequal(flash_info_t * info, int sect, uchar offset, uchar cmd) +static int flash_isequal (flash_info_t * info, int sect, uchar offset, + uchar cmd) { - cfiptr_t cptr; - cfiword_t cword; - int retval; - cptr.cp = flash_make_addr(info, sect, offset); - flash_make_cmd(info, cmd, &cword); - switch(info->portwidth) { - case FLASH_CFI_8BIT: - retval = (cptr.cp[0] == cword.c); - break; - case FLASH_CFI_16BIT: - retval = (cptr.wp[0] == cword.w); - break; - case FLASH_CFI_32BIT: - retval = (cptr.lp[0] == cword.l); - break; - default: - retval = 0; - break; - } - return retval; + cfiptr_t cptr; + cfiword_t cword; + int retval; + + cptr.cp = flash_make_addr (info, sect, offset); + flash_make_cmd (info, cmd, &cword); + switch (info->portwidth) { + case FLASH_CFI_8BIT: + retval = (cptr.cp[0] == cword.c); + break; + case FLASH_CFI_16BIT: + retval = (cptr.wp[0] == cword.w); + break; + case FLASH_CFI_32BIT: + retval = (cptr.lp[0] == cword.l); + break; + default: + retval = 0; + break; + } + return retval; } + /*----------------------------------------------------------------------- */ -static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd) +static int flash_isset (flash_info_t * info, int sect, uchar offset, + uchar cmd) { - cfiptr_t cptr; - cfiword_t cword; - int retval; - cptr.cp = flash_make_addr(info, sect, offset); - flash_make_cmd(info, cmd, &cword); - switch(info->portwidth) { - case FLASH_CFI_8BIT: - retval = ((cptr.cp[0] & cword.c) == cword.c); - break; - case FLASH_CFI_16BIT: - retval = ((cptr.wp[0] & cword.w) == cword.w); - break; - case FLASH_CFI_32BIT: - retval = ((cptr.lp[0] & cword.l) == cword.l); - break; - default: - retval = 0; - break; - } - return retval; + cfiptr_t cptr; + cfiword_t cword; + int retval; + + cptr.cp = flash_make_addr (info, sect, offset); + flash_make_cmd (info, cmd, &cword); + switch (info->portwidth) { + case FLASH_CFI_8BIT: + retval = ((cptr.cp[0] & cword.c) == cword.c); + break; + case FLASH_CFI_16BIT: + retval = ((cptr.wp[0] & cword.w) == cword.w); + break; + case FLASH_CFI_32BIT: + retval = ((cptr.lp[0] & cword.l) == cword.l); + break; + default: + retval = 0; + break; + } + return retval; } /*----------------------------------------------------------------------- @@ -632,152 +651,177 @@ static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd) * http://www.jedec.org/download/search/jesd68.pdf * */ -static int flash_detect_cfi(flash_info_t * info) +static int flash_detect_cfi (flash_info_t * info) { #if 0 - for(info->portwidth=FLASH_CFI_8BIT; info->portwidth <= FLASH_CFI_32BIT; - info->portwidth <<= 1) { - for(info->chipwidth =FLASH_CFI_BY8; - info->chipwidth <= info->portwidth; - info->chipwidth <<= 1) { - flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); - flash_write_cmd(info, 0, FLASH_OFFSET_CFI, FLASH_CMD_CFI); - if(flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP,'Q') && - flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R') && - flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y')) - return 1; - } - } + for (info->portwidth = FLASH_CFI_8BIT; + info->portwidth <= FLASH_CFI_32BIT; info->portwidth <<= 1) { + for (info->chipwidth = FLASH_CFI_BY8; + info->chipwidth <= info->portwidth; + info->chipwidth <<= 1) { + flash_write_cmd (info, 0, 0, FLASH_CMD_RESET); + flash_write_cmd (info, 0, FLASH_OFFSET_CFI, + FLASH_CMD_CFI); + if (flash_isequal + (info, 0, FLASH_OFFSET_CFI_RESP, 'Q') + && flash_isequal (info, 0, + FLASH_OFFSET_CFI_RESP + 1, 'R') + && flash_isequal (info, 0, + FLASH_OFFSET_CFI_RESP + 2, 'Y')) + return 1; + } + } #endif - flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); - flash_write_cmd(info, 0, FLASH_OFFSET_CFI, FLASH_CMD_CFI); - if(flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP,'Q') && - flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R') && - flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y')) { - return 1; - } else { - return 0; - }; + flash_write_cmd (info, 0, 0, FLASH_CMD_RESET); + flash_write_cmd (info, 0, FLASH_OFFSET_CFI, FLASH_CMD_CFI); + if (flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP, 'Q') && + flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R') && + flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y')) { + return 1; + } else { + return 0; + }; } + /* * The following code cannot be run from FLASH! * */ static ulong flash_get_size (ulong base, int banknum) { - flash_info_t * info = &flash_info[banknum]; - int i, j; - int sect_cnt; - unsigned long sector; - unsigned long tmp; - int size_ratio; - uchar num_erase_regions; - int erase_region_size; - int erase_region_count; - - info->start[0] = base; - - if(flash_detect_cfi(info)){ + flash_info_t *info = &flash_info[banknum]; + int i, j; + int sect_cnt; + unsigned long sector; + unsigned long tmp; + int size_ratio; + uchar num_erase_regions; + int erase_region_size; + int erase_region_count; + + info->start[0] = base; + + if (flash_detect_cfi (info)) { #ifdef DEBUG_FLASH - printf("portwidth=%d chipwidth=%d\n", info->portwidth, info->chipwidth); /* test-only */ + printf ("portwidth=%d chipwidth=%d\n", info->portwidth, info->chipwidth); /* test-only */ #endif - size_ratio = 1; // info->portwidth / info->chipwidth; - num_erase_regions = flash_read_uchar(info, FLASH_OFFSET_NUM_ERASE_REGIONS); + size_ratio = 1; /* info->portwidth / info->chipwidth; */ + num_erase_regions = + flash_read_uchar (info, + FLASH_OFFSET_NUM_ERASE_REGIONS); #ifdef DEBUG_FLASH - printf("found %d erase regions\n", num_erase_regions); + printf ("found %d erase regions\n", num_erase_regions); #endif - sect_cnt = 0; - sector = base; - for(i = 0 ; i < num_erase_regions; i++) { - if(i > NUM_ERASE_REGIONS) { - printf("%d erase regions found, only %d used\n", - num_erase_regions, NUM_ERASE_REGIONS); - break; - } - tmp = flash_read_long(info, 0, FLASH_OFFSET_ERASE_REGIONS); - erase_region_count = (tmp & 0xffff) +1; - tmp >>= 16; - erase_region_size = (tmp & 0xffff)? ((tmp & 0xffff) * 256): 128; - for(j = 0; j< erase_region_count; j++) { - info->start[sect_cnt] = sector; - sector += (erase_region_size * size_ratio); - info->protect[sect_cnt] = flash_isset(info, sect_cnt, FLASH_OFFSET_PROTECT, FLASH_STATUS_PROTECT); - sect_cnt++; - } - } - - info->sector_count = sect_cnt; - /* multiply the size by the number of chips */ - info->size = (1 << flash_read_uchar(info, FLASH_OFFSET_SIZE)) * size_ratio; - info->buffer_size = (1 << flash_read_ushort(info, 0, FLASH_OFFSET_BUFFER_SIZE)); - tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_ETOUT); - info->erase_blk_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_EMAX_TOUT))); - tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WBTOUT); - info->buffer_write_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_WBMAX_TOUT))); - tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WTOUT); - info->write_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_WMAX_TOUT)))/ 1000; - info->flash_id = FLASH_MAN_CFI; - } - - flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); - return(info->size); + sect_cnt = 0; + sector = base; + for (i = 0; i < num_erase_regions; i++) { + if (i > NUM_ERASE_REGIONS) { + printf ("%d erase regions found, only %d used\n", num_erase_regions, NUM_ERASE_REGIONS); + break; + } + tmp = flash_read_long (info, 0, + FLASH_OFFSET_ERASE_REGIONS); + erase_region_count = (tmp & 0xffff) + 1; + tmp >>= 16; + erase_region_size = + (tmp & 0xffff) ? ((tmp & 0xffff) * 256) : 128; + for (j = 0; j < erase_region_count; j++) { + info->start[sect_cnt] = sector; + sector += (erase_region_size * size_ratio); + info->protect[sect_cnt] = + flash_isset (info, sect_cnt, + FLASH_OFFSET_PROTECT, + FLASH_STATUS_PROTECT); + sect_cnt++; + } + } + + info->sector_count = sect_cnt; + /* multiply the size by the number of chips */ + info->size = + (1 << flash_read_uchar (info, FLASH_OFFSET_SIZE)) * + size_ratio; + info->buffer_size = + (1 << + flash_read_ushort (info, 0, + FLASH_OFFSET_BUFFER_SIZE)); + tmp = 1 << flash_read_uchar (info, FLASH_OFFSET_ETOUT); + info->erase_blk_tout = + (tmp * + (1 << + flash_read_uchar (info, FLASH_OFFSET_EMAX_TOUT))); + tmp = 1 << flash_read_uchar (info, FLASH_OFFSET_WBTOUT); + info->buffer_write_tout = + (tmp * + (1 << + flash_read_uchar (info, FLASH_OFFSET_WBMAX_TOUT))); + tmp = 1 << flash_read_uchar (info, FLASH_OFFSET_WTOUT); + info->write_tout = + (tmp * + (1 << + flash_read_uchar (info, + FLASH_OFFSET_WMAX_TOUT))) / 1000; + info->flash_id = FLASH_MAN_CFI; + } + + flash_write_cmd (info, 0, 0, FLASH_CMD_RESET); + return (info->size); } - /*----------------------------------------------------------------------- */ -static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword) +static int flash_write_cfiword (flash_info_t * info, ulong dest, + cfiword_t cword) { - cfiptr_t ctladdr; - cfiptr_t cptr; - int flag; - - ctladdr.cp = flash_make_addr(info, 0, 0); - cptr.cp = (uchar *)dest; - - - /* Check if Flash is (sufficiently) erased */ - switch(info->portwidth) { - case FLASH_CFI_8BIT: - flag = ((cptr.cp[0] & cword.c) == cword.c); - break; - case FLASH_CFI_16BIT: - flag = ((cptr.wp[0] & cword.w) == cword.w); - break; - case FLASH_CFI_32BIT: - flag = ((cptr.lp[0] & cword.l) == cword.l); - break; - default: - return 2; - } - if(!flag) - return 2; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - flash_write_cmd(info, 0, 0, FLASH_CMD_CLEAR_STATUS); - flash_write_cmd(info, 0, 0, FLASH_CMD_WRITE); - - switch(info->portwidth) { - case FLASH_CFI_8BIT: - cptr.cp[0] = cword.c; - break; - case FLASH_CFI_16BIT: - cptr.wp[0] = cword.w; - break; - case FLASH_CFI_32BIT: - cptr.lp[0] = cword.l; - break; - } - - /* re-enable interrupts if necessary */ - if(flag) - enable_interrupts(); - - return flash_full_status_check(info, 0, info->write_tout, "write"); + cfiptr_t ctladdr; + cfiptr_t cptr; + int flag; + + ctladdr.cp = flash_make_addr (info, 0, 0); + cptr.cp = (uchar *) dest; + + /* Check if Flash is (sufficiently) erased */ + switch (info->portwidth) { + case FLASH_CFI_8BIT: + flag = ((cptr.cp[0] & cword.c) == cword.c); + break; + case FLASH_CFI_16BIT: + flag = ((cptr.wp[0] & cword.w) == cword.w); + break; + case FLASH_CFI_32BIT: + flag = ((cptr.lp[0] & cword.l) == cword.l); + break; + default: + return 2; + } + if (!flag) + return 2; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts (); + + flash_write_cmd (info, 0, 0, FLASH_CMD_CLEAR_STATUS); + flash_write_cmd (info, 0, 0, FLASH_CMD_WRITE); + + switch (info->portwidth) { + case FLASH_CFI_8BIT: + cptr.cp[0] = cword.c; + break; + case FLASH_CFI_16BIT: + cptr.wp[0] = cword.w; + break; + case FLASH_CFI_32BIT: + cptr.lp[0] = cword.l; + break; + } + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts (); + + return flash_full_status_check (info, 0, info->write_tout, "write"); } #ifdef CFG_FLASH_USE_BUFFER_WRITE @@ -786,68 +830,74 @@ static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword) * when the passed address is greater or equal to the sector address * we have a match */ -static int find_sector(flash_info_t *info, ulong addr) +static int find_sector (flash_info_t * info, ulong addr) { - int sector; - for(sector = info->sector_count - 1; sector >= 0; sector--) { - if(addr >= info->start[sector]) - break; - } - return sector; + int sector; + + for (sector = info->sector_count - 1; sector >= 0; sector--) { + if (addr >= info->start[sector]) + break; + } + return sector; } -static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len) +static int flash_write_cfibuffer (flash_info_t * info, ulong dest, uchar * cp, + int len) { - int sector; - int cnt; - int retcode; - volatile cfiptr_t src; - volatile cfiptr_t dst; - - src.cp = cp; - dst.cp = (uchar *)dest; - sector = find_sector(info, dest); - flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS); - flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_TO_BUFFER); - if((retcode = flash_status_check(info, sector, info->buffer_write_tout, - "write to buffer")) == ERR_OK) { - switch(info->portwidth) { - case FLASH_CFI_8BIT: - cnt = len; - break; - case FLASH_CFI_16BIT: - cnt = len >> 1; - break; - case FLASH_CFI_32BIT: - cnt = len >> 2; - break; - default: - return ERR_INVAL; - break; - } - flash_write_cmd(info, sector, 0, (uchar)cnt-1); - while(cnt-- > 0) { - switch(info->portwidth) { - case FLASH_CFI_8BIT: - *dst.cp++ = *src.cp++; - break; - case FLASH_CFI_16BIT: - *dst.wp++ = *src.wp++; - break; - case FLASH_CFI_32BIT: - *dst.lp++ = *src.lp++; - break; - default: - return ERR_INVAL; - break; - } - } - flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_BUFFER_CONFIRM); - retcode = flash_full_status_check(info, sector, info->buffer_write_tout, - "buffer write"); - } - flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS); - return retcode; + int sector; + int cnt; + int retcode; + volatile cfiptr_t src; + volatile cfiptr_t dst; + + src.cp = cp; + dst.cp = (uchar *) dest; + sector = find_sector (info, dest); + flash_write_cmd (info, sector, 0, FLASH_CMD_CLEAR_STATUS); + flash_write_cmd (info, sector, 0, FLASH_CMD_WRITE_TO_BUFFER); + if ((retcode = + flash_status_check (info, sector, info->buffer_write_tout, + "write to buffer")) == ERR_OK) { + switch (info->portwidth) { + case FLASH_CFI_8BIT: + cnt = len; + break; + case FLASH_CFI_16BIT: + cnt = len >> 1; + break; + case FLASH_CFI_32BIT: + cnt = len >> 2; + break; + default: + return ERR_INVAL; + break; + } + flash_write_cmd (info, sector, 0, (uchar) cnt - 1); + while (cnt-- > 0) { + switch (info->portwidth) { + case FLASH_CFI_8BIT: + *dst.cp++ = *src.cp++; + break; + case FLASH_CFI_16BIT: + *dst.wp++ = *src.wp++; + break; + case FLASH_CFI_32BIT: + *dst.lp++ = *src.lp++; + break; + default: + return ERR_INVAL; + break; + } + } + flash_write_cmd (info, sector, 0, + FLASH_CMD_WRITE_BUFFER_CONFIRM); + retcode = + flash_full_status_check (info, sector, + info->buffer_write_tout, + "buffer write"); + } + flash_write_cmd (info, sector, 0, FLASH_CMD_CLEAR_STATUS); + return retcode; } #endif /* CFG_USE_FLASH_BUFFER_WRITE */ diff --git a/board/amirix/ap1000/init.S b/board/amirix/ap1000/init.S index 8c3a357832..3aaa5c2f1a 100644 --- a/board/amirix/ap1000/init.S +++ b/board/amirix/ap1000/init.S @@ -25,10 +25,10 @@ #include - .globl ext_bus_cntlr_init + .globl ext_bus_cntlr_init ext_bus_cntlr_init: - blr + blr - .globl sdram_init + .globl sdram_init sdram_init: - blr + blr diff --git a/board/amirix/ap1000/pci.c b/board/amirix/ap1000/pci.c index 34cd5872b9..a6436ac5bb 100644 --- a/board/amirix/ap1000/pci.c +++ b/board/amirix/ap1000/pci.c @@ -30,105 +30,121 @@ #define PCI_IO_82559ER_CSR_BASE 0x40000200 /** AP1100 specific values */ -#define PSII_BASE 0x30000000 /**< PowerSpan II dual bridge local bus register address */ -#define PSII_CONFIG_ADDR 0x30000290 /**< PowerSpan II Configuration Cycle Address configuration register */ -#define PSII_CONFIG_DATA 0x30000294 /**< PowerSpan II Configuration Cycle Data register. */ -#define PSII_CONFIG_DEST_PCI2 0x01000000 /**< PowerSpan II configuration cycle destination selection, set for PCI2 bus */ -#define PSII_PCI_MEM_BASE 0x30200000 /**< Local Bus address for start of PCI memory space on PCI2 bus. */ -#define PSII_PCI_MEM_SIZE 0x1BE00000 /**< PCI Memory space about 510 Meg. */ -#define AP1000_SYS_MEM_START 0x00000000 /**< System memory starts at 0. */ -#define AP1000_SYS_MEM_SIZE 0x08000000 /**< System memory is 128 Meg. */ +#define PSII_BASE 0x30000000 /**< PowerSpan II dual bridge local bus register address */ +#define PSII_CONFIG_ADDR 0x30000290 /**< PowerSpan II Configuration Cycle Address configuration register */ +#define PSII_CONFIG_DATA 0x30000294 /**< PowerSpan II Configuration Cycle Data register. */ +#define PSII_CONFIG_DEST_PCI2 0x01000000 /**< PowerSpan II configuration cycle destination selection, set for PCI2 bus */ +#define PSII_PCI_MEM_BASE 0x30200000 /**< Local Bus address for start of PCI memory space on PCI2 bus. */ +#define PSII_PCI_MEM_SIZE 0x1BE00000 /**< PCI Memory space about 510 Meg. */ +#define AP1000_SYS_MEM_START 0x00000000 /**< System memory starts at 0. */ +#define AP1000_SYS_MEM_SIZE 0x08000000 /**< System memory is 128 Meg. */ /* static int G_verbosity_level = 1; */ #define G_verbosity_level 1 -void write1(unsigned long addr, unsigned char val) { - volatile unsigned char* p = (volatile unsigned char*)addr; +void write1 (unsigned long addr, unsigned char val) +{ + volatile unsigned char *p = (volatile unsigned char *) addr; - if(G_verbosity_level > 1) - printf("write1: addr=%08x val=%02x\n", (unsigned int)addr, val); - *p = val; - asm("eieio"); + if (G_verbosity_level > 1) + printf ("write1: addr=%08x val=%02x\n", (unsigned int) addr, + val); + *p = val; + asm ("eieio"); } -unsigned char read1(unsigned long addr) { - unsigned char val; - volatile unsigned char* p = (volatile unsigned char*)addr; - - if(G_verbosity_level > 1) - printf("read1: addr=%08x ", (unsigned int)addr); - val = *p; - asm("eieio"); - if(G_verbosity_level > 1) - printf("val=%08x\n", val); - return val; +unsigned char read1 (unsigned long addr) +{ + unsigned char val; + volatile unsigned char *p = (volatile unsigned char *) addr; + + if (G_verbosity_level > 1) + printf ("read1: addr=%08x ", (unsigned int) addr); + val = *p; + asm ("eieio"); + if (G_verbosity_level > 1) + printf ("val=%08x\n", val); + return val; } -void write2(unsigned long addr, unsigned short val) { - volatile unsigned short* p = (volatile unsigned short*)addr; +void write2 (unsigned long addr, unsigned short val) +{ + volatile unsigned short *p = (volatile unsigned short *) addr; - if(G_verbosity_level > 1) - printf("write2: addr=%08x val=%04x -> *p=%04x\n", (unsigned int)addr, val, - ((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8)); + if (G_verbosity_level > 1) + printf ("write2: addr=%08x val=%04x -> *p=%04x\n", + (unsigned int) addr, val, + ((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8)); - *p = ((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8); - asm("eieio"); + *p = ((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8); + asm ("eieio"); } -unsigned short read2(unsigned long addr) { - unsigned short val; - volatile unsigned short* p = (volatile unsigned short*)addr; - - if(G_verbosity_level > 1) - printf("read2: addr=%08x ", (unsigned int)addr); - val = *p; - val = ((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8); - asm("eieio"); - if(G_verbosity_level > 1) - printf("*p=%04x -> val=%04x\n", - ((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8), val); - return val; +unsigned short read2 (unsigned long addr) +{ + unsigned short val; + volatile unsigned short *p = (volatile unsigned short *) addr; + + if (G_verbosity_level > 1) + printf ("read2: addr=%08x ", (unsigned int) addr); + val = *p; + val = ((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8); + asm ("eieio"); + if (G_verbosity_level > 1) + printf ("*p=%04x -> val=%04x\n", + ((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8), val); + return val; } -void write4(unsigned long addr, unsigned long val) { - volatile unsigned long* p = (volatile unsigned long*)addr; - - if(G_verbosity_level > 1) - printf("write4: addr=%08x val=%08x -> *p=%08x\n", (unsigned int)addr, (unsigned int)val, - (unsigned int)(((val & 0xFF000000) >> 24) | ((val & 0x000000FF) << 24) | - ((val & 0x00FF0000) >> 8) | ((val & 0x0000FF00) << 8))); - - *p = ((val & 0xFF000000) >> 24) | ((val & 0x000000FF) << 24) | - ((val & 0x00FF0000) >> 8) | ((val & 0x0000FF00) << 8); - asm("eieio"); +void write4 (unsigned long addr, unsigned long val) +{ + volatile unsigned long *p = (volatile unsigned long *) addr; + + if (G_verbosity_level > 1) + printf ("write4: addr=%08x val=%08x -> *p=%08x\n", + (unsigned int) addr, (unsigned int) val, + (unsigned int) (((val & 0xFF000000) >> 24) | + ((val & 0x000000FF) << 24) | + ((val & 0x00FF0000) >> 8) | + ((val & 0x0000FF00) << 8))); + + *p = ((val & 0xFF000000) >> 24) | ((val & 0x000000FF) << 24) | + ((val & 0x00FF0000) >> 8) | ((val & 0x0000FF00) << 8); + asm ("eieio"); } -unsigned long read4(unsigned long addr) { - unsigned long val; - volatile unsigned long* p = (volatile unsigned long*)addr; - - if(G_verbosity_level > 1) - printf("read4: addr=%08x", (unsigned int)addr); - - val = *p; - val = ((val & 0xFF000000) >> 24) | ((val & 0x000000FF) << 24) | - ((val & 0x00FF0000) >> 8) | ((val & 0x0000FF00) << 8); - asm("eieio"); - - if(G_verbosity_level > 1) - printf("*p=%04x -> val=%04x\n", - (unsigned int)(((val & 0xFF000000) >> 24) | ((val & 0x000000FF) << 24) | - ((val & 0x00FF0000) >> 8) | ((val & 0x0000FF00) << 8)), (unsigned int)val); - return val; +unsigned long read4 (unsigned long addr) +{ + unsigned long val; + volatile unsigned long *p = (volatile unsigned long *) addr; + + if (G_verbosity_level > 1) + printf ("read4: addr=%08x", (unsigned int) addr); + + val = *p; + val = ((val & 0xFF000000) >> 24) | ((val & 0x000000FF) << 24) | + ((val & 0x00FF0000) >> 8) | ((val & 0x0000FF00) << 8); + asm ("eieio"); + + if (G_verbosity_level > 1) + printf ("*p=%04x -> val=%04x\n", + (unsigned int) (((val & 0xFF000000) >> 24) | + ((val & 0x000000FF) << 24) | + ((val & 0x00FF0000) >> 8) | + ((val & 0x0000FF00) << 8)), + (unsigned int) val); + return val; } -void write4be(unsigned long addr, unsigned long val) { - volatile unsigned long* p = (volatile unsigned long*)addr; +void write4be (unsigned long addr, unsigned long val) +{ + volatile unsigned long *p = (volatile unsigned long *) addr; - if(G_verbosity_level > 1) - printf("write4: addr=%08x val=%08x\n", (unsigned int)addr, (unsigned int)val); - *p = val; - asm("eieio"); + if (G_verbosity_level > 1) + printf ("write4: addr=%08x val=%08x\n", (unsigned int) addr, + (unsigned int) val); + *p = val; + asm ("eieio"); } /** One byte configuration write on PSII. @@ -140,21 +156,14 @@ void write4be(unsigned long addr, unsigned long val) { * @param val Address of location for received byte. * @return Always Zero. */ -static int psII_read_config_byte( - struct pci_controller *hose, - pci_dev_t dev, - int reg, - u8 *val) +static int psII_read_config_byte (struct pci_controller *hose, + pci_dev_t dev, int reg, u8 * val) { - write4be(PSII_CONFIG_ADDR, - PSII_CONFIG_DEST_PCI2 | /* Operate on PCI2 bus interface . */ - (PCI_BUS(dev) << 16) | - (PCI_DEV(dev) << 11) | - (PCI_FUNC(dev) << 8) | - ((reg & 0xFF) & ~3)); /* Configuation cycle type 0 */ - - *val = read1(PSII_CONFIG_DATA+(reg&0x03)); - return(0); + write4be (PSII_CONFIG_ADDR, PSII_CONFIG_DEST_PCI2 | /* Operate on PCI2 bus interface . */ + (PCI_BUS (dev) << 16) | (PCI_DEV (dev) << 11) | (PCI_FUNC (dev) << 8) | ((reg & 0xFF) & ~3)); /* Configuation cycle type 0 */ + + *val = read1 (PSII_CONFIG_DATA + (reg & 0x03)); + return (0); } /** One byte configuration write on PSII. @@ -166,22 +175,15 @@ static int psII_read_config_byte( * @param val Output byte. * @return Always Zero. */ -static int psII_write_config_byte( - struct pci_controller *hose, - pci_dev_t dev, - int reg, - u8 val) +static int psII_write_config_byte (struct pci_controller *hose, + pci_dev_t dev, int reg, u8 val) { - write4be(PSII_CONFIG_ADDR, - PSII_CONFIG_DEST_PCI2 | /* Operate on PCI2 bus interface . */ - (PCI_BUS(dev) << 16) | - (PCI_DEV(dev) << 11) | - (PCI_FUNC(dev) << 8) | - ((reg & 0xFF) & ~3)); /* Configuation cycle type 0 */ + write4be (PSII_CONFIG_ADDR, PSII_CONFIG_DEST_PCI2 | /* Operate on PCI2 bus interface . */ + (PCI_BUS (dev) << 16) | (PCI_DEV (dev) << 11) | (PCI_FUNC (dev) << 8) | ((reg & 0xFF) & ~3)); /* Configuation cycle type 0 */ - write1(PSII_CONFIG_DATA+(reg&0x03),(unsigned char )val); + write1 (PSII_CONFIG_DATA + (reg & 0x03), (unsigned char) val); - return(0); + return (0); } /** One word (16 bit) configuration read on PSII. @@ -193,21 +195,14 @@ static int psII_write_config_byte( * @param val Address of location for received word. * @return Always Zero. */ -static int psII_read_config_word( - struct pci_controller *hose, - pci_dev_t dev, - int reg, - u16 *val) +static int psII_read_config_word (struct pci_controller *hose, + pci_dev_t dev, int reg, u16 * val) { - write4be(PSII_CONFIG_ADDR, - PSII_CONFIG_DEST_PCI2 | /* Operate on PCI2 bus interface . */ - (PCI_BUS(dev) << 16) | - (PCI_DEV(dev) << 11) | - (PCI_FUNC(dev) << 8) | - ((reg & 0xFF) & ~3)); /* Configuation cycle type 0 */ - - *val = read2(PSII_CONFIG_DATA+(reg&0x03)); - return(0); + write4be (PSII_CONFIG_ADDR, PSII_CONFIG_DEST_PCI2 | /* Operate on PCI2 bus interface . */ + (PCI_BUS (dev) << 16) | (PCI_DEV (dev) << 11) | (PCI_FUNC (dev) << 8) | ((reg & 0xFF) & ~3)); /* Configuation cycle type 0 */ + + *val = read2 (PSII_CONFIG_DATA + (reg & 0x03)); + return (0); } /** One word (16 bit) configuration write on PSII. @@ -219,22 +214,15 @@ static int psII_read_config_word( * @param val Output word. * @return Always Zero. */ -static int psII_write_config_word( - struct pci_controller *hose, - pci_dev_t dev, - int reg, - u16 val) +static int psII_write_config_word (struct pci_controller *hose, + pci_dev_t dev, int reg, u16 val) { - write4be(PSII_CONFIG_ADDR, - PSII_CONFIG_DEST_PCI2 | /* Operate on PCI2 bus interface . */ - (PCI_BUS(dev) << 16) | - (PCI_DEV(dev) << 11) | - (PCI_FUNC(dev) << 8) | - ((reg & 0xFF) & ~3)); /* Configuation cycle type 0 */ + write4be (PSII_CONFIG_ADDR, PSII_CONFIG_DEST_PCI2 | /* Operate on PCI2 bus interface . */ + (PCI_BUS (dev) << 16) | (PCI_DEV (dev) << 11) | (PCI_FUNC (dev) << 8) | ((reg & 0xFF) & ~3)); /* Configuation cycle type 0 */ - write2(PSII_CONFIG_DATA+(reg&0x03),(unsigned short )val); + write2 (PSII_CONFIG_DATA + (reg & 0x03), (unsigned short) val); - return(0); + return (0); } /** One DWord (32 bit) configuration read on PSII. @@ -246,21 +234,14 @@ static int psII_write_config_word( * @param val Address of location for received byte. * @return Always Zero. */ -static int psII_read_config_dword( - struct pci_controller *hose, - pci_dev_t dev, - int reg, - u32 *val) +static int psII_read_config_dword (struct pci_controller *hose, + pci_dev_t dev, int reg, u32 * val) { - write4be(PSII_CONFIG_ADDR, - PSII_CONFIG_DEST_PCI2 | /* Operate on PCI2 bus interface . */ - (PCI_BUS(dev) << 16) | - (PCI_DEV(dev) << 11) | - (PCI_FUNC(dev) << 8) | - ((reg & 0xFF) & ~3)); /* Configuation cycle type 0 */ - - *val = read4(PSII_CONFIG_DATA); - return(0); + write4be (PSII_CONFIG_ADDR, PSII_CONFIG_DEST_PCI2 | /* Operate on PCI2 bus interface . */ + (PCI_BUS (dev) << 16) | (PCI_DEV (dev) << 11) | (PCI_FUNC (dev) << 8) | ((reg & 0xFF) & ~3)); /* Configuation cycle type 0 */ + + *val = read4 (PSII_CONFIG_DATA); + return (0); } /** One DWord (32 bit) configuration write on PSII. @@ -272,75 +253,66 @@ static int psII_read_config_dword( * @param val Output Dword. * @return Always Zero. */ -static int psII_write_config_dword( - struct pci_controller *hose, - pci_dev_t dev, - int reg, - u32 val) +static int psII_write_config_dword (struct pci_controller *hose, + pci_dev_t dev, int reg, u32 val) { - write4be(PSII_CONFIG_ADDR, - PSII_CONFIG_DEST_PCI2 | /* Operate on PCI2 bus interface . */ - (PCI_BUS(dev) << 16) | - (PCI_DEV(dev) << 11) | - (PCI_FUNC(dev) << 8) | - ((reg & 0xFF) & ~3)); /* Configuation cycle type 0 */ + write4be (PSII_CONFIG_ADDR, PSII_CONFIG_DEST_PCI2 | /* Operate on PCI2 bus interface . */ + (PCI_BUS (dev) << 16) | (PCI_DEV (dev) << 11) | (PCI_FUNC (dev) << 8) | ((reg & 0xFF) & ~3)); /* Configuation cycle type 0 */ - write4(PSII_CONFIG_DATA,(unsigned long)val); + write4 (PSII_CONFIG_DATA, (unsigned long) val); - return(0); + return (0); } - - -static struct pci_config_table ap1000_config_table[] = { +static struct pci_config_table ap1000_config_table[] = { #ifdef CONFIG_AP1000 - {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, - PCI_BUS(CFG_ETH_DEV_FN), PCI_DEV(CFG_ETH_DEV_FN), PCI_FUNC(CFG_ETH_DEV_FN), - pci_cfgfunc_config_device, - {CFG_ETH_IOBASE, CFG_ETH_MEMBASE, PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }}, + {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_BUS (CFG_ETH_DEV_FN), PCI_DEV (CFG_ETH_DEV_FN), + PCI_FUNC (CFG_ETH_DEV_FN), + pci_cfgfunc_config_device, + {CFG_ETH_IOBASE, CFG_ETH_MEMBASE, + PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}}, #endif - { } + {} }; - static struct pci_controller psII_hose = { - config_table: ap1000_config_table, + config_table:ap1000_config_table, }; -void pci_init_board(void) +void pci_init_board (void) { - struct pci_controller *hose = &psII_hose; - - /* - * Register the hose - */ - hose->first_busno = 0; - hose->last_busno = 0xff; + struct pci_controller *hose = &psII_hose; + /* + * Register the hose + */ + hose->first_busno = 0; + hose->last_busno = 0xff; - /* System memory space */ - pci_set_region(hose->regions + 0, - AP1000_SYS_MEM_START, AP1000_SYS_MEM_START, AP1000_SYS_MEM_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + /* System memory space */ + pci_set_region (hose->regions + 0, + AP1000_SYS_MEM_START, AP1000_SYS_MEM_START, + AP1000_SYS_MEM_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); - /* PCI Memory space */ - pci_set_region(hose->regions + 1, - PSII_PCI_MEM_BASE, PSII_PCI_MEM_BASE, PSII_PCI_MEM_SIZE, - PCI_REGION_MEM); + /* PCI Memory space */ + pci_set_region (hose->regions + 1, + PSII_PCI_MEM_BASE, PSII_PCI_MEM_BASE, + PSII_PCI_MEM_SIZE, PCI_REGION_MEM); - /* No IO Memory space - for now */ + /* No IO Memory space - for now */ - pci_set_ops(hose, - psII_read_config_byte, - psII_read_config_word, - psII_read_config_dword, - psII_write_config_byte, - psII_write_config_word, - psII_write_config_dword); + pci_set_ops (hose, + psII_read_config_byte, + psII_read_config_word, + psII_read_config_dword, + psII_write_config_byte, + psII_write_config_word, psII_write_config_dword); - hose->region_count = 2; + hose->region_count = 2; - pci_register_hose(hose); + pci_register_hose (hose); - hose->last_busno = pci_hose_scan(hose); + hose->last_busno = pci_hose_scan (hose); } diff --git a/board/amirix/ap1000/powerspan.c b/board/amirix/ap1000/powerspan.c index fe395ccb86..f0481553f0 100644 --- a/board/amirix/ap1000/powerspan.c +++ b/board/amirix/ap1000/powerspan.c @@ -38,467 +38,492 @@ * @param addr [IN] the address to write to * @param val [IN] the value to write */ -void write1(unsigned long addr, unsigned char val) { - volatile unsigned char* p = (volatile unsigned char*)addr; +void write1 (unsigned long addr, unsigned char val) +{ + volatile unsigned char *p = (volatile unsigned char *) addr; + #ifdef VERBOSITY - if(gVerbosityLevel > 1){ - printf("write1: addr=%08x val=%02x\n", addr, val); - } + if (gVerbosityLevel > 1) { + printf ("write1: addr=%08x val=%02x\n", addr, val); + } #endif - *p = val; - PSII_SYNC(); + *p = val; + PSII_SYNC (); } /** Read one byte with byte swapping. * @param addr [IN] the address to read from * @return the value at addr */ -unsigned char read1(unsigned long addr) { - unsigned char val; - volatile unsigned char* p = (volatile unsigned char*)addr; +unsigned char read1 (unsigned long addr) +{ + unsigned char val; + volatile unsigned char *p = (volatile unsigned char *) addr; - val = *p; - PSII_SYNC(); + val = *p; + PSII_SYNC (); #ifdef VERBOSITY - if(gVerbosityLevel > 1){ - printf("read1: addr=%08x val=%02x\n", addr, val); - } + if (gVerbosityLevel > 1) { + printf ("read1: addr=%08x val=%02x\n", addr, val); + } #endif - return val; + return val; } /** Write one 2-byte word with byte swapping. * @param addr [IN] the address to write to * @param val [IN] the value to write */ -void write2(unsigned long addr, unsigned short val) { - volatile unsigned short* p = (volatile unsigned short*)addr; +void write2 (unsigned long addr, unsigned short val) +{ + volatile unsigned short *p = (volatile unsigned short *) addr; #ifdef VERBOSITY - if(gVerbosityLevel > 1){ - printf("write2: addr=%08x val=%04x -> *p=%04x\n", addr, val, - ((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8)); - } + if (gVerbosityLevel > 1) { + printf ("write2: addr=%08x val=%04x -> *p=%04x\n", addr, val, + ((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8)); + } #endif - *p = ((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8); - PSII_SYNC(); + *p = ((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8); + PSII_SYNC (); } /** Read one 2-byte word with byte swapping. * @param addr [IN] the address to read from * @return the value at addr */ -unsigned short read2(unsigned long addr) { - unsigned short val; - volatile unsigned short* p = (volatile unsigned short*)addr; - - val = *p; - val = ((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8); - PSII_SYNC(); +unsigned short read2 (unsigned long addr) +{ + unsigned short val; + volatile unsigned short *p = (volatile unsigned short *) addr; + + val = *p; + val = ((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8); + PSII_SYNC (); #ifdef VERBOSITY - if(gVerbosityLevel > 1){ - printf("read2: addr=%08x *p=%04x -> val=%04x\n", addr, *p, val); - } + if (gVerbosityLevel > 1) { + printf ("read2: addr=%08x *p=%04x -> val=%04x\n", addr, *p, + val); + } #endif - return val; + return val; } /** Write one 4-byte word with byte swapping. * @param addr [IN] the address to write to * @param val [IN] the value to write */ -void write4(unsigned long addr, unsigned long val) { - volatile unsigned long* p = (volatile unsigned long*)addr; +void write4 (unsigned long addr, unsigned long val) +{ + volatile unsigned long *p = (volatile unsigned long *) addr; + #ifdef VERBOSITY - if(gVerbosityLevel > 1){ - printf("write4: addr=%08x val=%08x -> *p=%08x\n", addr, val, - ((val & 0xFF000000) >> 24) | ((val & 0x000000FF) << 24) | - ((val & 0x00FF0000) >> 8) | ((val & 0x0000FF00) << 8)); - } + if (gVerbosityLevel > 1) { + printf ("write4: addr=%08x val=%08x -> *p=%08x\n", addr, val, + ((val & 0xFF000000) >> 24) | + ((val & 0x000000FF) << 24) | + ((val & 0x00FF0000) >> 8) | + ((val & 0x0000FF00) << 8)); + } #endif - *p = ((val & 0xFF000000) >> 24) | ((val & 0x000000FF) << 24) | - ((val & 0x00FF0000) >> 8) | ((val & 0x0000FF00) << 8); - PSII_SYNC(); + *p = ((val & 0xFF000000) >> 24) | ((val & 0x000000FF) << 24) | + ((val & 0x00FF0000) >> 8) | ((val & 0x0000FF00) << 8); + PSII_SYNC (); } /** Read one 4-byte word with byte swapping. * @param addr [IN] the address to read from * @return the value at addr */ -unsigned long read4(unsigned long addr) { - unsigned long val; - volatile unsigned long* p = (volatile unsigned long*)addr; - - val = *p; - val = ((val & 0xFF000000) >> 24) | ((val & 0x000000FF) << 24) | - ((val & 0x00FF0000) >> 8) | ((val & 0x0000FF00) << 8); - PSII_SYNC(); +unsigned long read4 (unsigned long addr) +{ + unsigned long val; + volatile unsigned long *p = (volatile unsigned long *) addr; + + val = *p; + val = ((val & 0xFF000000) >> 24) | ((val & 0x000000FF) << 24) | + ((val & 0x00FF0000) >> 8) | ((val & 0x0000FF00) << 8); + PSII_SYNC (); #ifdef VERBOSITY - if(gVerbosityLevel > 1){ - printf("read4: addr=%08x *p=%08x -> val=%08x\n", addr, *p, val); - } + if (gVerbosityLevel > 1) { + printf ("read4: addr=%08x *p=%08x -> val=%08x\n", addr, *p, + val); + } #endif - return val; + return val; } -int PCIReadConfig(int bus, int dev, int fn, int reg, int width, unsigned long* val){ - unsigned int conAdrVal; - unsigned int conDataReg = REG_CONFIG_DATA; - unsigned int status; - int ret_val = 0; - - - /* DEST bit hardcoded to 1: local pci is PCI-2 */ - /* TYPE bit is hardcoded to 1: all config cycles are local */ - conAdrVal = (1 << 24) - | ((bus & 0xFF) << 16) - | ((dev & 0xFF) << 11) - | ((fn & 0x07) << 8) - | (reg & 0xFC); - - /* clear any pending master aborts */ - write4(REG_P1_CSR, CLEAR_MASTER_ABORT); - - /* Load the conAdrVal value first, then read from pb_conf_data */ - write4(REG_CONFIG_ADDRESS, conAdrVal); - PSII_SYNC(); - - - /* Note: documentation does not match the pspan library code */ - /* Note: *pData comes back as -1 if device is not present */ - switch (width){ - case 4:{ - *(unsigned int*)val = read4(conDataReg); - break; - } - case 2:{ - *(unsigned short*)val = read2(conDataReg); - break; - } - case 1:{ - *(unsigned char*)val = read1(conDataReg); - break; - } - default:{ - ret_val = ILLEGAL_REG_OFFSET; - break; - } - } - PSII_SYNC(); - - /* clear any pending master aborts */ - status = read4(REG_P1_CSR); - if(status & CLEAR_MASTER_ABORT){ - ret_val = NO_DEVICE_FOUND; - write4(REG_P1_CSR, CLEAR_MASTER_ABORT); - } - - return ret_val; +int PCIReadConfig (int bus, int dev, int fn, int reg, int width, + unsigned long *val) +{ + unsigned int conAdrVal; + unsigned int conDataReg = REG_CONFIG_DATA; + unsigned int status; + int ret_val = 0; + + + /* DEST bit hardcoded to 1: local pci is PCI-2 */ + /* TYPE bit is hardcoded to 1: all config cycles are local */ + conAdrVal = (1 << 24) + | ((bus & 0xFF) << 16) + | ((dev & 0xFF) << 11) + | ((fn & 0x07) << 8) + | (reg & 0xFC); + + /* clear any pending master aborts */ + write4 (REG_P1_CSR, CLEAR_MASTER_ABORT); + + /* Load the conAdrVal value first, then read from pb_conf_data */ + write4 (REG_CONFIG_ADDRESS, conAdrVal); + PSII_SYNC (); + + + /* Note: documentation does not match the pspan library code */ + /* Note: *pData comes back as -1 if device is not present */ + switch (width) { + case 4: + *(unsigned int *) val = read4 (conDataReg); + break; + case 2: + *(unsigned short *) val = read2 (conDataReg); + break; + case 1: + *(unsigned char *) val = read1 (conDataReg); + break; + default: + ret_val = ILLEGAL_REG_OFFSET; + break; + } + PSII_SYNC (); + + /* clear any pending master aborts */ + status = read4 (REG_P1_CSR); + if (status & CLEAR_MASTER_ABORT) { + ret_val = NO_DEVICE_FOUND; + write4 (REG_P1_CSR, CLEAR_MASTER_ABORT); + } + + return ret_val; } -int PCIWriteConfig(int bus, int dev, int fn, int reg, int width, unsigned long val){ - unsigned int conAdrVal; - unsigned int conDataReg = REG_CONFIG_DATA; - unsigned int status; - int ret_val = 0; - - - /* DEST bit hardcoded to 1: local pci is PCI-2 */ - /* TYPE bit is hardcoded to 1: all config cycles are local */ - conAdrVal = (1 << 24) - | ((bus & 0xFF) << 16) - | ((dev & 0xFF) << 11) - | ((fn & 0x07) << 8) - | (reg & 0xFC); - - /* clear any pending master aborts */ - write4(REG_P1_CSR, CLEAR_MASTER_ABORT); - - /* Load the conAdrVal value first, then read from pb_conf_data */ - write4(REG_CONFIG_ADDRESS, conAdrVal); - PSII_SYNC(); - - - /* Note: documentation does not match the pspan library code */ - /* Note: *pData comes back as -1 if device is not present */ - switch (width){ - case 4:{ - write4(conDataReg, val); - break; - } - case 2:{ - write2(conDataReg, val); - break; - } - case 1:{ - write1(conDataReg, val); - break; - } - default:{ - ret_val = ILLEGAL_REG_OFFSET; - break; - } - } - PSII_SYNC(); - - /* clear any pending master aborts */ - status = read4(REG_P1_CSR); - if(status & CLEAR_MASTER_ABORT){ - ret_val = NO_DEVICE_FOUND; - write4(REG_P1_CSR, CLEAR_MASTER_ABORT); - } - - return ret_val; +int PCIWriteConfig (int bus, int dev, int fn, int reg, int width, + unsigned long val) +{ + unsigned int conAdrVal; + unsigned int conDataReg = REG_CONFIG_DATA; + unsigned int status; + int ret_val = 0; + + + /* DEST bit hardcoded to 1: local pci is PCI-2 */ + /* TYPE bit is hardcoded to 1: all config cycles are local */ + conAdrVal = (1 << 24) + | ((bus & 0xFF) << 16) + | ((dev & 0xFF) << 11) + | ((fn & 0x07) << 8) + | (reg & 0xFC); + + /* clear any pending master aborts */ + write4 (REG_P1_CSR, CLEAR_MASTER_ABORT); + + /* Load the conAdrVal value first, then read from pb_conf_data */ + write4 (REG_CONFIG_ADDRESS, conAdrVal); + PSII_SYNC (); + + + /* Note: documentation does not match the pspan library code */ + /* Note: *pData comes back as -1 if device is not present */ + switch (width) { + case 4: + write4 (conDataReg, val); + break; + case 2: + write2 (conDataReg, val); + break; + case 1: + write1 (conDataReg, val); + break; + default: + ret_val = ILLEGAL_REG_OFFSET; + break; + } + PSII_SYNC (); + + /* clear any pending master aborts */ + status = read4 (REG_P1_CSR); + if (status & CLEAR_MASTER_ABORT) { + ret_val = NO_DEVICE_FOUND; + write4 (REG_P1_CSR, CLEAR_MASTER_ABORT); + } + + return ret_val; } -int pci_read_config_byte(int bus, int dev, int fn, int reg, unsigned char* val){ - unsigned long read_val; - int ret_val; +int pci_read_config_byte (int bus, int dev, int fn, int reg, + unsigned char *val) +{ + unsigned long read_val; + int ret_val; - ret_val = PCIReadConfig(bus, dev, fn, reg, 1, &read_val); - *val = read_val & 0xFF; + ret_val = PCIReadConfig (bus, dev, fn, reg, 1, &read_val); + *val = read_val & 0xFF; - return ret_val; + return ret_val; } -int pci_write_config_byte(int bus, int dev, int fn, int reg, unsigned char val){ - return PCIWriteConfig(bus, dev, fn, reg, 1, val); +int pci_write_config_byte (int bus, int dev, int fn, int reg, + unsigned char val) +{ + return PCIWriteConfig (bus, dev, fn, reg, 1, val); } -int pci_read_config_word(int bus, int dev, int fn, int reg, unsigned short* val){ - unsigned long read_val; - int ret_val; +int pci_read_config_word (int bus, int dev, int fn, int reg, + unsigned short *val) +{ + unsigned long read_val; + int ret_val; - ret_val = PCIReadConfig(bus, dev, fn, reg, 2, &read_val); - *val = read_val & 0xFFFF; + ret_val = PCIReadConfig (bus, dev, fn, reg, 2, &read_val); + *val = read_val & 0xFFFF; - return ret_val; + return ret_val; } -int pci_write_config_word(int bus, int dev, int fn, int reg, unsigned short val){ - return PCIWriteConfig(bus, dev, fn, reg, 2, val); +int pci_write_config_word (int bus, int dev, int fn, int reg, + unsigned short val) +{ + return PCIWriteConfig (bus, dev, fn, reg, 2, val); } -int pci_read_config_dword(int bus, int dev, int fn, int reg, unsigned long* val){ - return PCIReadConfig(bus, dev, fn, reg, 4, val); +int pci_read_config_dword (int bus, int dev, int fn, int reg, + unsigned long *val) +{ + return PCIReadConfig (bus, dev, fn, reg, 4, val); } -int pci_write_config_dword(int bus, int dev, int fn, int reg, unsigned long val){ - return PCIWriteConfig(bus, dev, fn, reg, 4, val); +int pci_write_config_dword (int bus, int dev, int fn, int reg, + unsigned long val) +{ + return PCIWriteConfig (bus, dev, fn, reg, 4, val); } #endif /* INCLUDE_PCI */ -int I2CAccess(unsigned char theI2CAddress, unsigned char theDevCode, unsigned char theChipSel, unsigned char* theValue, int RWFlag){ - int ret_val = 0; - unsigned int reg_value; - - reg_value = PowerSpanRead(REG_I2C_CSR); - - if(reg_value & I2C_CSR_ACT){ - printf("Error: I2C busy\n"); - ret_val = I2C_BUSY; - } - else{ - reg_value = ((theI2CAddress & 0xFF) << 24) - | ((theDevCode & 0x0F) << 12) - | ((theChipSel & 0x07) << 9) - | I2C_CSR_ERR; - if(RWFlag == I2C_WRITE){ - reg_value |= I2C_CSR_RW | ((*theValue & 0xFF) << 16); - } - - PowerSpanWrite(REG_I2C_CSR, reg_value); - udelay(1); - - do{ - reg_value = PowerSpanRead(REG_I2C_CSR); - - if((reg_value & I2C_CSR_ACT) == 0){ - if(reg_value & I2C_CSR_ERR){ - ret_val = I2C_ERR; - } - else{ - *theValue = (reg_value & I2C_CSR_DATA) >> 16; - } - } - } while(reg_value & I2C_CSR_ACT); - } - - return ret_val; +int I2CAccess (unsigned char theI2CAddress, unsigned char theDevCode, + unsigned char theChipSel, unsigned char *theValue, int RWFlag) +{ + int ret_val = 0; + unsigned int reg_value; + + reg_value = PowerSpanRead (REG_I2C_CSR); + + if (reg_value & I2C_CSR_ACT) { + printf ("Error: I2C busy\n"); + ret_val = I2C_BUSY; + } else { + reg_value = ((theI2CAddress & 0xFF) << 24) + | ((theDevCode & 0x0F) << 12) + | ((theChipSel & 0x07) << 9) + | I2C_CSR_ERR; + if (RWFlag == I2C_WRITE) { + reg_value |= I2C_CSR_RW | ((*theValue & 0xFF) << 16); + } + + PowerSpanWrite (REG_I2C_CSR, reg_value); + udelay (1); + + do { + reg_value = PowerSpanRead (REG_I2C_CSR); + + if ((reg_value & I2C_CSR_ACT) == 0) { + if (reg_value & I2C_CSR_ERR) { + ret_val = I2C_ERR; + } else { + *theValue = + (reg_value & I2C_CSR_DATA) >> + 16; + } + } + } while (reg_value & I2C_CSR_ACT); + } + + return ret_val; } -int EEPROMRead(unsigned char theI2CAddress, unsigned char* theValue){ - return I2CAccess(theI2CAddress, I2C_EEPROM_DEV, I2C_EEPROM_CHIP_SEL, theValue, I2C_READ); +int EEPROMRead (unsigned char theI2CAddress, unsigned char *theValue) +{ + return I2CAccess (theI2CAddress, I2C_EEPROM_DEV, I2C_EEPROM_CHIP_SEL, + theValue, I2C_READ); } -int EEPROMWrite(unsigned char theI2CAddress, unsigned char theValue){ - return I2CAccess(theI2CAddress, I2C_EEPROM_DEV, I2C_EEPROM_CHIP_SEL, &theValue, I2C_WRITE); +int EEPROMWrite (unsigned char theI2CAddress, unsigned char theValue) +{ + return I2CAccess (theI2CAddress, I2C_EEPROM_DEV, I2C_EEPROM_CHIP_SEL, + &theValue, I2C_WRITE); } -int do_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]){ - char cmd; - int ret_val = 0; - unsigned int address = 0; - unsigned char value = 1; - unsigned char read_value; - int ii; - int error = 0; - unsigned char* mem_ptr; - unsigned char default_eeprom[] = EEPROM_DEFAULT; - - if(argc < 2){ - goto usage; - } - - cmd = argv[1][0]; - if(argc > 2){ - address = simple_strtoul(argv[2], NULL, 16); - if(argc > 3){ - value = simple_strtoul(argv[3], NULL, 16) & 0xFF; - } - } - - switch (cmd){ - case 'r':{ - if(address > 256){ - printf("Illegal Address\n"); - goto usage; - } - printf("@0x%x: ", address); - for(ii = 0;ii < value;ii++){ - if(EEPROMRead(address + ii, &read_value) != 0){ - printf("Read Error\n"); - } - else{ - printf("0x%02x ", read_value); - } - - if(((ii + 1) % 16) == 0){ - printf("\n"); - } - } - printf("\n"); - break; - } - case 'w':{ - if(address > 256){ - printf("Illegal Address\n"); - goto usage; - } - if(argc < 4){ - goto usage; - } - if(EEPROMWrite(address, value) != 0){ - printf("Write Error\n"); - } - break; - } - case 'g':{ - if(argc != 3){ - goto usage; - } - mem_ptr = (unsigned char*)address; - for(ii = 0;((ii < EEPROM_LENGTH) && (error == 0));ii++){ - if(EEPROMRead(ii, &read_value) != 0){ - printf("Read Error\n"); - error = 1; - } - else{ - *mem_ptr = read_value; - mem_ptr++; - } - } - break; - } - case 'p':{ - if(argc != 3){ - goto usage; - } - mem_ptr = (unsigned char*)address; - for(ii = 0;((ii < EEPROM_LENGTH) && (error == 0));ii++){ - if(EEPROMWrite(ii, *mem_ptr) != 0){ - printf("Write Error\n"); - error = 1; - } - - mem_ptr++; - } - break; - } - case 'd':{ - if(argc != 2){ - goto usage; - } - for(ii = 0;((ii < EEPROM_LENGTH) && (error == 0));ii++){ - if(EEPROMWrite(ii, default_eeprom[ii]) != 0){ - printf("Write Error\n"); - error = 1; - } - } - break; - } - default:{ - goto usage; - } - } - - goto done; - usage: - printf ("Usage:\n%s\n", cmdtp->help); - - done: - return ret_val; +int do_eeprom (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + char cmd; + int ret_val = 0; + unsigned int address = 0; + unsigned char value = 1; + unsigned char read_value; + int ii; + int error = 0; + unsigned char *mem_ptr; + unsigned char default_eeprom[] = EEPROM_DEFAULT; + + if (argc < 2) { + goto usage; + } + + cmd = argv[1][0]; + if (argc > 2) { + address = simple_strtoul (argv[2], NULL, 16); + if (argc > 3) { + value = simple_strtoul (argv[3], NULL, 16) & 0xFF; + } + } + + switch (cmd) { + case 'r': + if (address > 256) { + printf ("Illegal Address\n"); + goto usage; + } + printf ("@0x%x: ", address); + for (ii = 0; ii < value; ii++) { + if (EEPROMRead (address + ii, &read_value) != + 0) { + printf ("Read Error\n"); + } else { + printf ("0x%02x ", read_value); + } + + if (((ii + 1) % 16) == 0) { + printf ("\n"); + } + } + printf ("\n"); + break; + case 'w': + if (address > 256) { + printf ("Illegal Address\n"); + goto usage; + } + if (argc < 4) { + goto usage; + } + if (EEPROMWrite (address, value) != 0) { + printf ("Write Error\n"); + } + break; + case 'g': + if (argc != 3) { + goto usage; + } + mem_ptr = (unsigned char *) address; + for (ii = 0; ((ii < EEPROM_LENGTH) && (error == 0)); + ii++) { + if (EEPROMRead (ii, &read_value) != 0) { + printf ("Read Error\n"); + error = 1; + } else { + *mem_ptr = read_value; + mem_ptr++; + } + } + break; + case 'p': + if (argc != 3) { + goto usage; + } + mem_ptr = (unsigned char *) address; + for (ii = 0; ((ii < EEPROM_LENGTH) && (error == 0)); + ii++) { + if (EEPROMWrite (ii, *mem_ptr) != 0) { + printf ("Write Error\n"); + error = 1; + } + + mem_ptr++; + } + break; + case 'd': + if (argc != 2) { + goto usage; + } + for (ii = 0; ((ii < EEPROM_LENGTH) && (error == 0)); + ii++) { + if (EEPROMWrite (ii, default_eeprom[ii]) != 0) { + printf ("Write Error\n"); + error = 1; + } + } + break; + default: + goto usage; + } + + goto done; + usage: + printf ("Usage:\n%s\n", cmdtp->help); + + done: + return ret_val; } -U_BOOT_CMD( - eeprom, 4, 0, do_eeprom, - "eeprom - read/write/copy to/from the PowerSpan II eeprom\n", - "eeprom r OFF [NUM]\n" - " - read NUM words starting at OFF\n" - "eeprom w OFF VAL\n" - " - write word VAL at offset OFF\n" - "eeprom g ADD\n" - " - store contents of eeprom at address ADD\n" - "eeprom p ADD\n" - " - put data stored at address ADD into the eeprom\n" - "eeprom d\n" - " - return eeprom to default contents\n" -); - -unsigned int PowerSpanRead(unsigned int theOffset){ - volatile unsigned int* ptr = (volatile unsigned int*)(PSPAN_BASEADDR + theOffset); - unsigned int ret_val; +U_BOOT_CMD (eeprom, 4, 0, do_eeprom, + "eeprom - read/write/copy to/from the PowerSpan II eeprom\n", + "eeprom r OFF [NUM]\n" + " - read NUM words starting at OFF\n" + "eeprom w OFF VAL\n" + " - write word VAL at offset OFF\n" + "eeprom g ADD\n" + " - store contents of eeprom at address ADD\n" + "eeprom p ADD\n" + " - put data stored at address ADD into the eeprom\n" + "eeprom d\n" " - return eeprom to default contents\n"); + +unsigned int PowerSpanRead (unsigned int theOffset) +{ + volatile unsigned int *ptr = + (volatile unsigned int *) (PSPAN_BASEADDR + theOffset); + unsigned int ret_val; #ifdef VERBOSITY - if(gVerbosityLevel > 1){ - printf("PowerSpanRead: offset=%08x ", theOffset); - } + if (gVerbosityLevel > 1) { + printf ("PowerSpanRead: offset=%08x ", theOffset); + } #endif - ret_val = *ptr; - PSII_SYNC(); + ret_val = *ptr; + PSII_SYNC (); #ifdef VERBOSITY - if(gVerbosityLevel > 1){ - printf("value=%08x\n", ret_val); - } + if (gVerbosityLevel > 1) { + printf ("value=%08x\n", ret_val); + } #endif - return ret_val; + return ret_val; } -void PowerSpanWrite(unsigned int theOffset, unsigned int theValue){ - volatile unsigned int* ptr = (volatile unsigned int*)(PSPAN_BASEADDR + theOffset); +void PowerSpanWrite (unsigned int theOffset, unsigned int theValue) +{ + volatile unsigned int *ptr = + (volatile unsigned int *) (PSPAN_BASEADDR + theOffset); #ifdef VERBOSITY - if(gVerbosityLevel > 1){ - printf("PowerSpanWrite: offset=%08x val=%02x\n", theOffset, theValue); - } + if (gVerbosityLevel > 1) { + printf ("PowerSpanWrite: offset=%08x val=%02x\n", theOffset, + theValue); + } #endif - *ptr = theValue; - PSII_SYNC(); + *ptr = theValue; + PSII_SYNC (); } /** @@ -506,21 +531,24 @@ void PowerSpanWrite(unsigned int theOffset, unsigned int theValue){ * @param theOffset [IN] the register to access. * @param theMask [IN] bits set in theMask will be set in the register. */ -void PowerSpanSetBits(unsigned int theOffset, unsigned int theMask){ - volatile unsigned int* ptr = (volatile unsigned int*)(PSPAN_BASEADDR + theOffset); - unsigned int register_value; +void PowerSpanSetBits (unsigned int theOffset, unsigned int theMask) +{ + volatile unsigned int *ptr = + (volatile unsigned int *) (PSPAN_BASEADDR + theOffset); + unsigned int register_value; #ifdef VERBOSITY - if(gVerbosityLevel > 1){ - printf("PowerSpanSetBits: offset=%08x mask=%02x\n", theOffset, theMask); - } + if (gVerbosityLevel > 1) { + printf ("PowerSpanSetBits: offset=%08x mask=%02x\n", + theOffset, theMask); + } #endif - register_value = *ptr; - PSII_SYNC(); + register_value = *ptr; + PSII_SYNC (); - register_value |= theMask; - *ptr = register_value; - PSII_SYNC(); + register_value |= theMask; + *ptr = register_value; + PSII_SYNC (); } /** @@ -528,21 +556,24 @@ void PowerSpanSetBits(unsigned int theOffset, unsigned int theMask){ * @param theOffset [IN] the register to access. * @param theMask [IN] bits set in theMask will be cleared in the register. */ -void PowerSpanClearBits(unsigned int theOffset, unsigned int theMask){ - volatile unsigned int* ptr = (volatile unsigned int*)(PSPAN_BASEADDR + theOffset); - unsigned int register_value; +void PowerSpanClearBits (unsigned int theOffset, unsigned int theMask) +{ + volatile unsigned int *ptr = + (volatile unsigned int *) (PSPAN_BASEADDR + theOffset); + unsigned int register_value; #ifdef VERBOSITY - if(gVerbosityLevel > 1){ - printf("PowerSpanClearBits: offset=%08x mask=%02x\n", theOffset, theMask); - } + if (gVerbosityLevel > 1) { + printf ("PowerSpanClearBits: offset=%08x mask=%02x\n", + theOffset, theMask); + } #endif - register_value = *ptr; - PSII_SYNC(); + register_value = *ptr; + PSII_SYNC (); - register_value &= ~theMask; - *ptr = register_value; - PSII_SYNC(); + register_value &= ~theMask; + *ptr = register_value; + PSII_SYNC (); } /** @@ -556,36 +587,41 @@ void PowerSpanClearBits(unsigned int theOffset, unsigned int theMask){ * @param theLocalBaseAddr [IN] the Local address for the image (assumed to be valid with provided block size). * @param thePCIBaseAddr [IN] the PCI address for the image (assumed to be valid with provided block size). */ -int SetSlaveImage(int theImageIndex, unsigned int theBlockSize, int theMemIOFlag, int theEndianness, unsigned int theLocalBaseAddr, unsigned int thePCIBaseAddr){ - unsigned int reg_offset = theImageIndex * PB_SLAVE_IMAGE_OFF; - unsigned int reg_value = 0; - - /* Make sure that the Slave Image is disabled */ - PowerSpanClearBits((REGS_PB_SLAVE_CSR + reg_offset), PB_SLAVE_CSR_IMG_EN); - - /* Setup the mask required for requested PB Slave Image configuration */ - reg_value = PB_SLAVE_CSR_TA_EN | theEndianness | (theBlockSize << 24); - if(theMemIOFlag == PB_SLAVE_USE_MEM_IO){ - reg_value |= PB_SLAVE_CSR_MEM_IO; - } - - /* hardcoding the following: - TA_EN = 1 - MD_EN = 0 - MODE = 0 - PRKEEP = 0 - RD_AMT = 0 - */ - PowerSpanWrite((REGS_PB_SLAVE_CSR + reg_offset), reg_value); - - /* these values are not checked by software */ - PowerSpanWrite((REGS_PB_SLAVE_BADDR + reg_offset), theLocalBaseAddr); - PowerSpanWrite((REGS_PB_SLAVE_TADDR + reg_offset), thePCIBaseAddr); - - /* Enable the Slave Image */ - PowerSpanSetBits((REGS_PB_SLAVE_CSR + reg_offset), PB_SLAVE_CSR_IMG_EN); - - return 0; +int SetSlaveImage (int theImageIndex, unsigned int theBlockSize, + int theMemIOFlag, int theEndianness, + unsigned int theLocalBaseAddr, unsigned int thePCIBaseAddr) +{ + unsigned int reg_offset = theImageIndex * PB_SLAVE_IMAGE_OFF; + unsigned int reg_value = 0; + + /* Make sure that the Slave Image is disabled */ + PowerSpanClearBits ((REGS_PB_SLAVE_CSR + reg_offset), + PB_SLAVE_CSR_IMG_EN); + + /* Setup the mask required for requested PB Slave Image configuration */ + reg_value = PB_SLAVE_CSR_TA_EN | theEndianness | (theBlockSize << 24); + if (theMemIOFlag == PB_SLAVE_USE_MEM_IO) { + reg_value |= PB_SLAVE_CSR_MEM_IO; + } + + /* hardcoding the following: + TA_EN = 1 + MD_EN = 0 + MODE = 0 + PRKEEP = 0 + RD_AMT = 0 + */ + PowerSpanWrite ((REGS_PB_SLAVE_CSR + reg_offset), reg_value); + + /* these values are not checked by software */ + PowerSpanWrite ((REGS_PB_SLAVE_BADDR + reg_offset), theLocalBaseAddr); + PowerSpanWrite ((REGS_PB_SLAVE_TADDR + reg_offset), thePCIBaseAddr); + + /* Enable the Slave Image */ + PowerSpanSetBits ((REGS_PB_SLAVE_CSR + reg_offset), + PB_SLAVE_CSR_IMG_EN); + + return 0; } /** @@ -602,111 +638,113 @@ int SetSlaveImage(int theImageIndex, unsigned int theBlockSize, int theMemIOFlag * @param theLocalBaseAddr [IN] the Local address for the image (assumed to be valid with provided block size). * @param thePCIBaseAddr [IN] the PCI address for the image (assumed to be valid with provided block size). */ -int SetTargetImage(int theImageIndex, unsigned int theBlockSize, int theMemIOFlag, int theEndianness, unsigned int theLocalBaseAddr, unsigned int thePCIBaseAddr){ - unsigned int csr_reg_offset = theImageIndex * P1_TGT_IMAGE_OFF; - unsigned int pci_reg_offset = theImageIndex * P1_BST_OFF; - unsigned int reg_value = 0; - - /* Make sure that the Slave Image is disabled */ - PowerSpanClearBits((REGS_P1_TGT_CSR + csr_reg_offset), PB_SLAVE_CSR_IMG_EN); - - /* Setup the mask required for requested PB Slave Image configuration */ - reg_value = PX_TGT_CSR_TA_EN | PX_TGT_CSR_BAR_EN | (theBlockSize << 24) | PX_TGT_CSR_RTT_READ | PX_TGT_CSR_WTT_WFLUSH | theEndianness; - if(theMemIOFlag == PX_TGT_USE_MEM_IO){ - reg_value |= PX_TGT_MEM_IO; - } - - /* hardcoding the following: - TA_EN = 1 - BAR_EN = 1 - MD_EN = 0 - MODE = 0 - DEST = 0 - RTT = 01010 - GBL = 0 - CI = 0 - WTT = 00010 - PRKEEP = 0 - MRA = 0 - RD_AMT = 0 - */ - PowerSpanWrite((REGS_P1_TGT_CSR + csr_reg_offset), reg_value); - - PowerSpanWrite((REGS_P1_TGT_TADDR + csr_reg_offset), theLocalBaseAddr); - - if(thePCIBaseAddr != (unsigned int)NULL){ - PowerSpanWrite((REGS_P1_BST + pci_reg_offset), thePCIBaseAddr); - } - - /* Enable the Slave Image */ - PowerSpanSetBits((REGS_P1_TGT_CSR + csr_reg_offset), PB_SLAVE_CSR_IMG_EN); - - return 0; +int SetTargetImage (int theImageIndex, unsigned int theBlockSize, + int theMemIOFlag, int theEndianness, + unsigned int theLocalBaseAddr, + unsigned int thePCIBaseAddr) +{ + unsigned int csr_reg_offset = theImageIndex * P1_TGT_IMAGE_OFF; + unsigned int pci_reg_offset = theImageIndex * P1_BST_OFF; + unsigned int reg_value = 0; + + /* Make sure that the Slave Image is disabled */ + PowerSpanClearBits ((REGS_P1_TGT_CSR + csr_reg_offset), + PB_SLAVE_CSR_IMG_EN); + + /* Setup the mask required for requested PB Slave Image configuration */ + reg_value = + PX_TGT_CSR_TA_EN | PX_TGT_CSR_BAR_EN | (theBlockSize << 24) | + PX_TGT_CSR_RTT_READ | PX_TGT_CSR_WTT_WFLUSH | theEndianness; + if (theMemIOFlag == PX_TGT_USE_MEM_IO) { + reg_value |= PX_TGT_MEM_IO; + } + + /* hardcoding the following: + TA_EN = 1 + BAR_EN = 1 + MD_EN = 0 + MODE = 0 + DEST = 0 + RTT = 01010 + GBL = 0 + CI = 0 + WTT = 00010 + PRKEEP = 0 + MRA = 0 + RD_AMT = 0 + */ + PowerSpanWrite ((REGS_P1_TGT_CSR + csr_reg_offset), reg_value); + + PowerSpanWrite ((REGS_P1_TGT_TADDR + csr_reg_offset), + theLocalBaseAddr); + + if (thePCIBaseAddr != (unsigned int) NULL) { + PowerSpanWrite ((REGS_P1_BST + pci_reg_offset), + thePCIBaseAddr); + } + + /* Enable the Slave Image */ + PowerSpanSetBits ((REGS_P1_TGT_CSR + csr_reg_offset), + PB_SLAVE_CSR_IMG_EN); + + return 0; } -int do_bridge(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]){ - char cmd; - int ret_val = 1; - unsigned int image_index; - unsigned int block_size; - unsigned int mem_io; - unsigned int local_addr; - unsigned int pci_addr; - int endianness; - - if(argc != 8){ - goto usage; - } - - cmd = argv[1][0]; - image_index = simple_strtoul(argv[2], NULL, 16); - block_size = simple_strtoul(argv[3], NULL, 16); - mem_io = simple_strtoul(argv[4], NULL, 16); - endianness = argv[5][0]; - local_addr = simple_strtoul(argv[6], NULL, 16); - pci_addr = simple_strtoul(argv[7], NULL, 16); - - - switch (cmd){ - case 'i':{ - if(tolower(endianness) == 'b'){ - endianness = PX_TGT_CSR_BIG_END; - } - else if(tolower(endianness) == 'l'){ - endianness = PX_TGT_CSR_TRUE_LEND; - } - else{ - goto usage; - } - SetTargetImage(image_index, block_size, mem_io, endianness, local_addr, pci_addr); - break; - } - case 'o':{ - if(tolower(endianness) == 'b'){ - endianness = PB_SLAVE_CSR_BIG_END; - } - else if(tolower(endianness) == 'l'){ - endianness = PB_SLAVE_CSR_TRUE_LEND; - } - else{ - goto usage; - } - SetSlaveImage(image_index, block_size, mem_io, endianness, local_addr, pci_addr); - break; - } - default:{ - goto usage; - } - } - - goto done; - usage: - printf ("Usage:\n%s\n", cmdtp->help); - - done: - return ret_val; - +int do_bridge (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + char cmd; + int ret_val = 1; + unsigned int image_index; + unsigned int block_size; + unsigned int mem_io; + unsigned int local_addr; + unsigned int pci_addr; + int endianness; + + if (argc != 8) { + goto usage; + } + + cmd = argv[1][0]; + image_index = simple_strtoul (argv[2], NULL, 16); + block_size = simple_strtoul (argv[3], NULL, 16); + mem_io = simple_strtoul (argv[4], NULL, 16); + endianness = argv[5][0]; + local_addr = simple_strtoul (argv[6], NULL, 16); + pci_addr = simple_strtoul (argv[7], NULL, 16); + + + switch (cmd) { + case 'i': + if (tolower (endianness) == 'b') { + endianness = PX_TGT_CSR_BIG_END; + } else if (tolower (endianness) == 'l') { + endianness = PX_TGT_CSR_TRUE_LEND; + } else { + goto usage; + } + SetTargetImage (image_index, block_size, mem_io, + endianness, local_addr, pci_addr); + break; + case 'o': + if (tolower (endianness) == 'b') { + endianness = PB_SLAVE_CSR_BIG_END; + } else if (tolower (endianness) == 'l') { + endianness = PB_SLAVE_CSR_TRUE_LEND; + } else { + goto usage; + } + SetSlaveImage (image_index, block_size, mem_io, + endianness, local_addr, pci_addr); + break; + default: + goto usage; + } + + goto done; +usage: + printf ("Usage:\n%s\n", cmdtp->help); + +done: + return ret_val; } - - - diff --git a/board/amirix/ap1000/serial.c b/board/amirix/ap1000/serial.c index 431e46961f..39c4157925 100644 --- a/board/amirix/ap1000/serial.c +++ b/board/amirix/ap1000/serial.c @@ -31,65 +31,59 @@ #include "serial.h" #endif -const NS16550_t COM_PORTS[] = { (NS16550_t) CFG_NS16550_COM1, (NS16550_t) CFG_NS16550_COM2 }; +const NS16550_t COM_PORTS[] = + { (NS16550_t) CFG_NS16550_COM1, (NS16550_t) CFG_NS16550_COM2 }; #undef CFG_DUART_CHAN #define CFG_DUART_CHAN gComPort static int gComPort = 0; -int -serial_init (void) +int serial_init (void) { - DECLARE_GLOBAL_DATA_PTR; - - int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate; + DECLARE_GLOBAL_DATA_PTR; - (void)NS16550_init(COM_PORTS[0], clock_divisor); - gComPort = 0; + int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate; - return 0; + (void) NS16550_init (COM_PORTS[0], clock_divisor); + gComPort = 0; + return 0; } -void -serial_putc(const char c) +void serial_putc (const char c) { - if (c == '\n'){ - NS16550_putc(COM_PORTS[CFG_DUART_CHAN], '\r'); - } + if (c == '\n') { + NS16550_putc (COM_PORTS[CFG_DUART_CHAN], '\r'); + } - NS16550_putc(COM_PORTS[CFG_DUART_CHAN], c); + NS16550_putc (COM_PORTS[CFG_DUART_CHAN], c); } -int -serial_getc(void) +int serial_getc (void) { - return NS16550_getc(COM_PORTS[CFG_DUART_CHAN]); + return NS16550_getc (COM_PORTS[CFG_DUART_CHAN]); } -int -serial_tstc(void) +int serial_tstc (void) { - return NS16550_tstc(COM_PORTS[CFG_DUART_CHAN]); + return NS16550_tstc (COM_PORTS[CFG_DUART_CHAN]); } -void -serial_setbrg (void) +void serial_setbrg (void) { DECLARE_GLOBAL_DATA_PTR; - int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate; + int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate; #ifdef CFG_INIT_CHAN1 - NS16550_reinit(COM_PORTS[0], clock_divisor); + NS16550_reinit (COM_PORTS[0], clock_divisor); #endif #ifdef CFG_INIT_CHAN2 - NS16550_reinit(COM_PORTS[1], clock_divisor); + NS16550_reinit (COM_PORTS[1], clock_divisor); #endif } -void -serial_puts (const char *s) +void serial_puts (const char *s) { while (*s) { serial_putc (*s++); @@ -97,32 +91,27 @@ serial_puts (const char *s) } #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -void -kgdb_serial_init(void) +void kgdb_serial_init (void) { } -void -putDebugChar (int c) +void putDebugChar (int c) { serial_putc (c); } -void -putDebugStr (const char *str) +void putDebugStr (const char *str) { serial_puts (str); } -int -getDebugChar (void) +int getDebugChar (void) { - return serial_getc(); + return serial_getc (); } -void -kgdb_interruptible (int yes) +void kgdb_interruptible (int yes) { return; } -#endif /* CFG_CMD_KGDB */ +#endif /* CFG_CMD_KGDB */ diff --git a/cpu/arm720t/serial_netarm.c b/cpu/arm720t/serial_netarm.c index 5b41949e0a..5ad98f06fd 100644 --- a/cpu/arm720t/serial_netarm.c +++ b/cpu/arm720t/serial_netarm.c @@ -35,7 +35,11 @@ #include #define PORTA (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTA)) +#if !defined(CONFIG_NETARM_NS7520) #define PORTB (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTB)) +#else +#define PORTC (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTC)) +#endif /* wait until transmitter is ready for another character */ #define TXWAITRDY(registers) \ @@ -48,8 +52,13 @@ } +#ifndef CONFIG_UART1_CONSOLE volatile netarm_serial_channel_t *serial_reg_ch1 = get_serial_channel(0); volatile netarm_serial_channel_t *serial_reg_ch2 = get_serial_channel(1); +#else +volatile netarm_serial_channel_t *serial_reg_ch1 = get_serial_channel(1); +volatile netarm_serial_channel_t *serial_reg_ch2 = get_serial_channel(0); +#endif extern void _netarm_led_FAIL1(void); @@ -62,8 +71,13 @@ void serial_setbrg (void) DECLARE_GLOBAL_DATA_PTR; /* set 0 ... make sure pins are configured for serial */ +#if !defined(CONFIG_NETARM_NS7520) PORTA = PORTB = NETARM_GEN_PORT_MODE (0xef) | NETARM_GEN_PORT_DIR (0xe0); +#else + PORTA = NETARM_GEN_PORT_MODE (0xef) | NETARM_GEN_PORT_DIR (0xe0); + PORTC = NETARM_GEN_PORT_CSF (0xef) | NETARM_GEN_PORT_MODE (0xef) | NETARM_GEN_PORT_DIR (0xe0); +#endif /* first turn em off */ serial_reg_ch1->ctrl_a = serial_reg_ch2->ctrl_a = 0; diff --git a/cpu/arm720t/start.S b/cpu/arm720t/start.S index 43582b3284..e66d109443 100644 --- a/cpu/arm720t/start.S +++ b/cpu/arm720t/start.S @@ -272,12 +272,15 @@ cpu_init_crit: str r1, [r0, #+NETARM_GEN_SYSTEM_CONTROL] +#ifndef CONFIG_NETARM_PLL_BYPASS ldr r1, =( NETARM_GEN_PLL_CTL_PLLCNT(NETARM_PLL_COUNT_VAL) | \ NETARM_GEN_PLL_CTL_POLTST_DEF | \ NETARM_GEN_PLL_CTL_INDIV(1) | \ NETARM_GEN_PLL_CTL_ICP_DEF | \ NETARM_GEN_PLL_CTL_OUTDIV(2) ) str r1, [r0, #+NETARM_GEN_PLL_CONTROL] +#endif + /* * mask all IRQs by clearing all bits in the INTMRs */ diff --git a/drivers/Makefile b/drivers/Makefile index 26a556e59a..e6176ed86a 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -34,7 +34,7 @@ OBJS = 3c589.o 5701rls.o ali512x.o \ i8042.o i82365.o inca-ip_sw.o keyboard.o \ lan91c96.o \ natsemi.o ne2000.o netarm_eth.o netconsole.o \ - ns16550.o ns8382x.o ns87308.o omap1510_i2c.o \ + ns16550.o ns8382x.o ns87308.o ns7520_eth.o omap1510_i2c.o \ omap24xx_i2c.o pci.o pci_auto.o pci_indirect.o \ pcnet.o plb2800_eth.o \ ps2ser.o ps2mult.o pc_keyb.o \ diff --git a/drivers/ns7520_eth.c b/drivers/ns7520_eth.c new file mode 100644 index 0000000000..bcdc27fa85 --- /dev/null +++ b/drivers/ns7520_eth.c @@ -0,0 +1,849 @@ +/*********************************************************************** + * + * Copyright (C) 2005 by Videon Central, Inc. + * + * $Id$ + * @Author: Arthur Shipkowski + * @Descr: Ethernet driver for the NS7520. Uses polled Ethernet, like + * the older netarmeth driver. Note that attempting to filter + * broadcast and multicast out in the SAFR register will cause + * bad things due to released errata. + * @References: [1] NS7520 Hardware Reference, December 2003 + * [2] Intel LXT971 Datasheet #249414 Rev. 02 + * + ***********************************************************************/ + +#include + +#if defined(CONFIG_DRIVER_NS7520_ETHERNET) + +#include /* NetSendPacket */ +#include +#include + +#include "ns7520_eth.h" /* for Ethernet and PHY */ + +/** + * Send an error message to the terminal. + */ +#define ERROR(x) \ +do { \ + char *__foo = strrchr(__FILE__, '/'); \ + \ + printf("%s: %d: %s(): ", (__foo == NULL ? __FILE__ : (__foo + 1)), \ + __LINE__, __FUNCTION__); \ + printf x; printf("\n"); \ +} while (0); + +/* some definition to make transistion to linux easier */ + +#define NS7520_DRIVER_NAME "eth" +#define KERN_WARNING "Warning:" +#define KERN_ERR "Error:" +#define KERN_INFO "Info:" + +#if 1 +# define DEBUG +#endif + +#ifdef DEBUG +# define printk printf + +# define DEBUG_INIT 0x0001 +# define DEBUG_MINOR 0x0002 +# define DEBUG_RX 0x0004 +# define DEBUG_TX 0x0008 +# define DEBUG_INT 0x0010 +# define DEBUG_POLL 0x0020 +# define DEBUG_LINK 0x0040 +# define DEBUG_MII 0x0100 +# define DEBUG_MII_LOW 0x0200 +# define DEBUG_MEM 0x0400 +# define DEBUG_ERROR 0x4000 +# define DEBUG_ERROR_CRIT 0x8000 + +static int nDebugLvl = DEBUG_ERROR_CRIT; + +# define DEBUG_ARGS0( FLG, a0 ) if( ( nDebugLvl & (FLG) ) == (FLG) ) \ + printf("%s: " a0, __FUNCTION__, 0, 0, 0, 0, 0, 0 ) +# define DEBUG_ARGS1( FLG, a0, a1 ) if( ( nDebugLvl & (FLG) ) == (FLG)) \ + printf("%s: " a0, __FUNCTION__, (int)(a1), 0, 0, 0, 0, 0 ) +# define DEBUG_ARGS2( FLG, a0, a1, a2 ) if( (nDebugLvl & (FLG)) ==(FLG))\ + printf("%s: " a0, __FUNCTION__, (int)(a1), (int)(a2), 0, 0,0,0 ) +# define DEBUG_ARGS3( FLG, a0, a1, a2, a3 ) if((nDebugLvl &(FLG))==(FLG))\ + printf("%s: "a0,__FUNCTION__,(int)(a1),(int)(a2),(int)(a3),0,0,0) +# define DEBUG_FN( FLG ) if( (nDebugLvl & (FLG)) == (FLG) ) \ + printf("\r%s:line %d\n", (int)__FUNCTION__, __LINE__, 0,0,0,0); +# define ASSERT( expr, func ) if( !( expr ) ) { \ + printf( "Assertion failed! %s:line %d %s\n", \ + (int)__FUNCTION__,__LINE__,(int)(#expr),0,0,0); \ + func } +#else /* DEBUG */ +# define printk(...) +# define DEBUG_ARGS0( FLG, a0 ) +# define DEBUG_ARGS1( FLG, a0, a1 ) +# define DEBUG_ARGS2( FLG, a0, a1, a2 ) +# define DEBUG_ARGS3( FLG, a0, a1, a2, a3 ) +# define DEBUG_FN( n ) +# define ASSERT(expr, func) +#endif /* DEBUG */ + +#define NS7520_MII_NEG_DELAY (5*CFG_HZ) /* in s */ +#define TX_TIMEOUT (5*CFG_HZ) /* in s */ +#define RX_STALL_WORKAROUND_CNT 100 + +static int ns7520_eth_reset(void); + +static void ns7520_link_auto_negotiate(void); +static void ns7520_link_update_egcr(void); +static void ns7520_link_print_changed(void); + +/* the PHY stuff */ + +static char ns7520_mii_identify_phy(void); +static unsigned short ns7520_mii_read(unsigned short uiRegister); +static void ns7520_mii_write(unsigned short uiRegister, + unsigned short uiData); +static unsigned int ns7520_mii_get_clock_divisor(unsigned int + unMaxMDIOClk); +static unsigned int ns7520_mii_poll_busy(void); + +static unsigned int nPhyMaxMdioClock = PHY_MDIO_MAX_CLK; +static unsigned int uiLastLinkStatus; +static PhyType phyDetected = PHY_NONE; + +/*********************************************************************** + * @Function: eth_init + * @Return: -1 on failure otherwise 0 + * @Descr: Initializes the ethernet engine and uses either FS Forth's default + * MAC addr or the one in environment + ***********************************************************************/ + +int eth_init(bd_t * pbis) +{ + unsigned char aucMACAddr[6]; + char *pcTmp = getenv("ethaddr"); + char *pcEnd; + int i; + + DEBUG_FN(DEBUG_INIT); + + /* no need to check for hardware */ + + if (!ns7520_eth_reset()) + return -1; + + if (NULL == pcTmp) + return -1; + + for (i = 0; i < 6; i++) { + aucMACAddr[i] = + pcTmp ? simple_strtoul(pcTmp, &pcEnd, 16) : 0; + pcTmp = (*pcTmp) ? pcEnd + 1 : pcEnd; + } + + /* configure ethernet address */ + + *get_eth_reg_addr(NS7520_ETH_SA1) = + aucMACAddr[5] << 8 | aucMACAddr[4]; + *get_eth_reg_addr(NS7520_ETH_SA2) = + aucMACAddr[3] << 8 | aucMACAddr[2]; + *get_eth_reg_addr(NS7520_ETH_SA3) = + aucMACAddr[1] << 8 | aucMACAddr[0]; + + /* enable hardware */ + + *get_eth_reg_addr(NS7520_ETH_MAC1) = NS7520_ETH_MAC1_RXEN; + *get_eth_reg_addr(NS7520_ETH_SUPP) = NS7520_ETH_SUPP_JABBER; + *get_eth_reg_addr(NS7520_ETH_MAC1) = NS7520_ETH_MAC1_RXEN; + + /* the linux kernel may give packets < 60 bytes, for example arp */ + *get_eth_reg_addr(NS7520_ETH_MAC2) = NS7520_ETH_MAC2_CRCEN | + NS7520_ETH_MAC2_PADEN | NS7520_ETH_MAC2_HUGE; + + /* Broadcast/multicast allowed; if you don't set this even unicast chokes */ + /* Based on NS7520 errata documentation */ + *get_eth_reg_addr(NS7520_ETH_SAFR) = + NS7520_ETH_SAFR_BROAD | NS7520_ETH_SAFR_PRM; + + /* enable receive and transmit FIFO, use 10/100 Mbps MII */ + *get_eth_reg_addr(NS7520_ETH_EGCR) |= + NS7520_ETH_EGCR_ETXWM_75 | + NS7520_ETH_EGCR_ERX | + NS7520_ETH_EGCR_ERXREG | + NS7520_ETH_EGCR_ERXBR | NS7520_ETH_EGCR_ETX; + + return 0; +} + +/*********************************************************************** + * @Function: eth_send + * @Return: -1 on timeout otherwise 1 + * @Descr: sends one frame by DMA + ***********************************************************************/ + +int eth_send(volatile void *pPacket, int nLen) +{ + int i, length32, retval = 1; + char *pa; + unsigned int *pa32, lastp = 0, rest; + unsigned int status; + + pa = (char *) pPacket; + pa32 = (unsigned int *) pPacket; + length32 = nLen / 4; + rest = nLen % 4; + + /* make sure there's no garbage in the last word */ + switch (rest) { + case 0: + lastp = pa32[length32 - 1]; + length32--; + break; + case 1: + lastp = pa32[length32] & 0x000000ff; + break; + case 2: + lastp = pa32[length32] & 0x0000ffff; + break; + case 3: + lastp = pa32[length32] & 0x00ffffff; + break; + } + + while (((*get_eth_reg_addr(NS7520_ETH_EGSR)) & + NS7520_ETH_EGSR_TXREGE) + == 0) { + } + + /* write to the fifo */ + for (i = 0; i < length32; i++) + *get_eth_reg_addr(NS7520_ETH_FIFO) = pa32[i]; + + /* the last word is written to an extra register, this + starts the transmission */ + *get_eth_reg_addr(NS7520_ETH_FIFOL) = lastp; + + /* Wait for it to be done */ + while ((*get_eth_reg_addr(NS7520_ETH_EGSR) & NS7520_ETH_EGSR_TXBC) + == 0) { + } + status = (*get_eth_reg_addr(NS7520_ETH_ETSR)); + *get_eth_reg_addr(NS7520_ETH_EGSR) = NS7520_ETH_EGSR_TXBC; /* Clear it now */ + + if (status & NS7520_ETH_ETSR_TXOK) { + retval = 0; /* We're OK! */ + } else if (status & NS7520_ETH_ETSR_TXDEF) { + printf("Deferred, we'll see.\n"); + retval = 0; + } else if (status & NS7520_ETH_ETSR_TXAL) { + printf("Late collision error, %d collisions.\n", + (*get_eth_reg_addr(NS7520_ETH_ETSR)) & + NS7520_ETH_ETSR_TXCOLC); + } else if (status & NS7520_ETH_ETSR_TXAEC) { + printf("Excessive collisions: %d\n", + (*get_eth_reg_addr(NS7520_ETH_ETSR)) & + NS7520_ETH_ETSR_TXCOLC); + } else if (status & NS7520_ETH_ETSR_TXAED) { + printf("Excessive deferral on xmit.\n"); + } else if (status & NS7520_ETH_ETSR_TXAUR) { + printf("Packet underrun.\n"); + } else if (status & NS7520_ETH_ETSR_TXAJ) { + printf("Jumbo packet error.\n"); + } else { + printf("Error: Should never get here.\n"); + } + + return (retval); +} + +/*********************************************************************** + * @Function: eth_rx + * @Return: size of last frame in bytes or 0 if no frame available + * @Descr: gives one frame to U-Boot which has been copied by DMA engine already + * to NetRxPackets[ 0 ]. + ***********************************************************************/ + +int eth_rx(void) +{ + int i; + unsigned short rxlen; + unsigned short totrxlen = 0; + unsigned int *addr; + unsigned int rxstatus, lastrxlen; + char *pa; + + /* If RXBR is 1, data block was received */ + while (((*get_eth_reg_addr(NS7520_ETH_EGSR)) & + NS7520_ETH_EGSR_RXBR) == NS7520_ETH_EGSR_RXBR) { + + /* get status register and the length of received block */ + rxstatus = *get_eth_reg_addr(NS7520_ETH_ERSR); + rxlen = (rxstatus & NS7520_ETH_ERSR_RXSIZE) >> 16; + + /* clear RXBR to make fifo available */ + *get_eth_reg_addr(NS7520_ETH_EGSR) = NS7520_ETH_EGSR_RXBR; + + if (rxstatus & NS7520_ETH_ERSR_ROVER) { + printf("Receive overrun, resetting FIFO.\n"); + *get_eth_reg_addr(NS7520_ETH_EGCR) &= + ~NS7520_ETH_EGCR_ERX; + udelay(20); + *get_eth_reg_addr(NS7520_ETH_EGCR) |= + NS7520_ETH_EGCR_ERX; + } + if (rxlen == 0) { + printf("Nothing.\n"); + return 0; + } + + addr = (unsigned int *) NetRxPackets[0]; + pa = (char *) NetRxPackets[0]; + + /* read the fifo */ + for (i = 0; i < rxlen / 4; i++) { + *addr = *get_eth_reg_addr(NS7520_ETH_FIFO); + addr++; + } + + if ((*get_eth_reg_addr(NS7520_ETH_EGSR)) & + NS7520_ETH_EGSR_RXREGR) { + /* RXFDB indicates wether the last word is 1,2,3 or 4 bytes long */ + lastrxlen = + ((*get_eth_reg_addr(NS7520_ETH_EGSR)) & + NS7520_ETH_EGSR_RXFDB_MA) >> 28; + *addr = *get_eth_reg_addr(NS7520_ETH_FIFO); + switch (lastrxlen) { + case 1: + *addr &= 0xff000000; + break; + case 2: + *addr &= 0xffff0000; + break; + case 3: + *addr &= 0xffffff00; + break; + } + } + + /* Pass the packet up to the protocol layers. */ + NetReceive(NetRxPackets[0], rxlen - 4); + totrxlen += rxlen - 4; + } + + return totrxlen; +} + +/*********************************************************************** + * @Function: eth_halt + * @Return: n/a + * @Descr: stops the ethernet engine + ***********************************************************************/ + +void eth_halt(void) +{ + DEBUG_FN(DEBUG_INIT); + + *get_eth_reg_addr(NS7520_ETH_MAC1) &= ~NS7520_ETH_MAC1_RXEN; + *get_eth_reg_addr(NS7520_ETH_EGCR) &= ~(NS7520_ETH_EGCR_ERX | + NS7520_ETH_EGCR_ERXDMA | + NS7520_ETH_EGCR_ERXREG | + NS7520_ETH_EGCR_ERXBR | + NS7520_ETH_EGCR_ETX | + NS7520_ETH_EGCR_ETXDMA); +} + +/*********************************************************************** + * @Function: ns7520_eth_reset + * @Return: 0 on failure otherwise 1 + * @Descr: resets the ethernet interface and the PHY, + * performs auto negotiation or fixed modes + ***********************************************************************/ + +static int ns7520_eth_reset(void) +{ + DEBUG_FN(DEBUG_MINOR); + + /* Reset important registers */ + *get_eth_reg_addr(NS7520_ETH_EGCR) = 0; /* Null it out! */ + *get_eth_reg_addr(NS7520_ETH_MAC1) &= NS7520_ETH_MAC1_SRST; + *get_eth_reg_addr(NS7520_ETH_MAC2) = 0; + /* Reset MAC */ + *get_eth_reg_addr(NS7520_ETH_EGCR) |= NS7520_ETH_EGCR_MAC_RES; + udelay(5); + *get_eth_reg_addr(NS7520_ETH_EGCR) &= ~NS7520_ETH_EGCR_MAC_RES; + + /* reset and initialize PHY */ + + *get_eth_reg_addr(NS7520_ETH_MAC1) &= ~NS7520_ETH_MAC1_SRST; + + /* we don't support hot plugging of PHY, therefore we don't reset + phyDetected and nPhyMaxMdioClock here. The risk is if the setting is + incorrect the first open + may detect the PHY correctly but succeding will fail + For reseting the PHY and identifying we have to use the standard + MDIO CLOCK value 2.5 MHz only after hardware reset + After having identified the PHY we will do faster */ + + *get_eth_reg_addr(NS7520_ETH_MCFG) = + ns7520_mii_get_clock_divisor(nPhyMaxMdioClock); + + /* reset PHY */ + ns7520_mii_write(PHY_COMMON_CTRL, PHY_COMMON_CTRL_RESET); + ns7520_mii_write(PHY_COMMON_CTRL, 0); + + udelay(3000); /* [2] p.70 says at least 300us reset recovery time. */ + + /* MII clock has been setup to default, ns7520_mii_identify_phy should + work for all */ + + if (!ns7520_mii_identify_phy()) { + printk(KERN_ERR NS7520_DRIVER_NAME + ": Unsupported PHY, aborting\n"); + return 0; + } + + /* now take the highest MDIO clock possible after detection */ + *get_eth_reg_addr(NS7520_ETH_MCFG) = + ns7520_mii_get_clock_divisor(nPhyMaxMdioClock); + + /* PHY has been detected, so there can be no abort reason and we can + finish initializing ethernet */ + + uiLastLinkStatus = 0xff; /* undefined */ + + ns7520_link_auto_negotiate(); + + if (phyDetected == PHY_LXT971A) + /* set LED2 to link mode */ + ns7520_mii_write(PHY_LXT971_LED_CFG, + (PHY_LXT971_LED_CFG_LINK_ACT << + PHY_LXT971_LED_CFG_SHIFT_LED2) | + (PHY_LXT971_LED_CFG_TRANSMIT << + PHY_LXT971_LED_CFG_SHIFT_LED1)); + + return 1; +} + +/*********************************************************************** + * @Function: ns7520_link_auto_negotiate + * @Return: void + * @Descr: performs auto-negotation of link. + ***********************************************************************/ + +static void ns7520_link_auto_negotiate(void) +{ + unsigned long ulStartJiffies; + unsigned short uiStatus; + + DEBUG_FN(DEBUG_LINK); + + /* run auto-negotation */ + /* define what we are capable of */ + ns7520_mii_write(PHY_COMMON_AUTO_ADV, + PHY_COMMON_AUTO_ADV_100BTXFD | + PHY_COMMON_AUTO_ADV_100BTX | + PHY_COMMON_AUTO_ADV_10BTFD | + PHY_COMMON_AUTO_ADV_10BT | + PHY_COMMON_AUTO_ADV_802_3); + /* start auto-negotiation */ + ns7520_mii_write(PHY_COMMON_CTRL, + PHY_COMMON_CTRL_AUTO_NEG | + PHY_COMMON_CTRL_RES_AUTO); + + /* wait for completion */ + + ulStartJiffies = get_timer(0); + while (get_timer(0) < ulStartJiffies + NS7520_MII_NEG_DELAY) { + uiStatus = ns7520_mii_read(PHY_COMMON_STAT); + if ((uiStatus & + (PHY_COMMON_STAT_AN_COMP | PHY_COMMON_STAT_LNK_STAT)) + == + (PHY_COMMON_STAT_AN_COMP | PHY_COMMON_STAT_LNK_STAT)) { + /* lucky we are, auto-negotiation succeeded */ + ns7520_link_print_changed(); + ns7520_link_update_egcr(); + return; + } + } + + DEBUG_ARGS0(DEBUG_LINK, "auto-negotiation timed out\n"); + /* ignore invalid link settings */ +} + +/*********************************************************************** + * @Function: ns7520_link_update_egcr + * @Return: void + * @Descr: updates the EGCR and MAC2 link status after mode change or + * auto-negotation + ***********************************************************************/ + +static void ns7520_link_update_egcr(void) +{ + unsigned int unEGCR; + unsigned int unMAC2; + unsigned int unIPGT; + + DEBUG_FN(DEBUG_LINK); + + unEGCR = *get_eth_reg_addr(NS7520_ETH_EGCR); + unMAC2 = *get_eth_reg_addr(NS7520_ETH_MAC2); + unIPGT = + *get_eth_reg_addr(NS7520_ETH_IPGT) & ~NS7520_ETH_IPGT_IPGT; + + unEGCR &= ~NS7520_ETH_EGCR_EFULLD; + unMAC2 &= ~NS7520_ETH_MAC2_FULLD; + if ((uiLastLinkStatus & PHY_LXT971_STAT2_DUPLEX_MODE) + == PHY_LXT971_STAT2_DUPLEX_MODE) { + unEGCR |= NS7520_ETH_EGCR_EFULLD; + unMAC2 |= NS7520_ETH_MAC2_FULLD; + unIPGT |= 0x15; /* see [1] p. 167 */ + } else + unIPGT |= 0x12; /* see [1] p. 167 */ + + *get_eth_reg_addr(NS7520_ETH_MAC2) = unMAC2; + *get_eth_reg_addr(NS7520_ETH_EGCR) = unEGCR; + *get_eth_reg_addr(NS7520_ETH_IPGT) = unIPGT; +} + +/*********************************************************************** + * @Function: ns7520_link_print_changed + * @Return: void + * @Descr: checks whether the link status has changed and if so prints + * the new mode + ***********************************************************************/ + +static void ns7520_link_print_changed(void) +{ + unsigned short uiStatus; + unsigned short uiControl; + + DEBUG_FN(DEBUG_LINK); + + uiControl = ns7520_mii_read(PHY_COMMON_CTRL); + + if ((uiControl & PHY_COMMON_CTRL_AUTO_NEG) == + PHY_COMMON_CTRL_AUTO_NEG) { + /* PHY_COMMON_STAT_LNK_STAT is only set on autonegotiation */ + uiStatus = ns7520_mii_read(PHY_COMMON_STAT); + + if (!(uiStatus & PHY_COMMON_STAT_LNK_STAT)) { + printk(KERN_WARNING NS7520_DRIVER_NAME + ": link down\n"); + /* @TODO Linux: carrier_off */ + } else { + /* @TODO Linux: carrier_on */ + if (phyDetected == PHY_LXT971A) { + uiStatus = + ns7520_mii_read(PHY_LXT971_STAT2); + uiStatus &= + (PHY_LXT971_STAT2_100BTX | + PHY_LXT971_STAT2_DUPLEX_MODE | + PHY_LXT971_STAT2_AUTO_NEG); + + /* mask out all uninteresting parts */ + } + /* other PHYs must store there link information in + uiStatus as PHY_LXT971 */ + } + } else { + /* mode has been forced, so uiStatus should be the same as the + last link status, enforce printing */ + uiStatus = uiLastLinkStatus; + uiLastLinkStatus = 0xff; + } + + if (uiStatus != uiLastLinkStatus) { + /* save current link status */ + uiLastLinkStatus = uiStatus; + + /* print new link status */ + + printk(KERN_INFO NS7520_DRIVER_NAME + ": link mode %i Mbps %s duplex %s\n", + (uiStatus & PHY_LXT971_STAT2_100BTX) ? 100 : 10, + (uiStatus & PHY_LXT971_STAT2_DUPLEX_MODE) ? "full" : + "half", + (uiStatus & PHY_LXT971_STAT2_AUTO_NEG) ? "(auto)" : + ""); + } +} + +/*********************************************************************** + * the MII low level stuff + ***********************************************************************/ + +/*********************************************************************** + * @Function: ns7520_mii_identify_phy + * @Return: 1 if supported PHY has been detected otherwise 0 + * @Descr: checks for supported PHY and prints the IDs. + ***********************************************************************/ + +static char ns7520_mii_identify_phy(void) +{ + unsigned short uiID1; + unsigned short uiID2; + unsigned char *szName; + char cRes = 0; + + DEBUG_FN(DEBUG_MII); + + phyDetected = (PhyType) uiID1 = ns7520_mii_read(PHY_COMMON_ID1); + + switch (phyDetected) { + case PHY_LXT971A: + szName = "LXT971A"; + uiID2 = ns7520_mii_read(PHY_COMMON_ID2); + nPhyMaxMdioClock = PHY_LXT971_MDIO_MAX_CLK; + cRes = 1; + break; + case PHY_NONE: + default: + /* in case uiID1 == 0 && uiID2 == 0 we may have the wrong + address or reset sets the wrong NS7520_ETH_MCFG_CLKS */ + + uiID2 = 0; + szName = "unknown"; + nPhyMaxMdioClock = PHY_MDIO_MAX_CLK; + phyDetected = PHY_NONE; + } + + printk(KERN_INFO NS7520_DRIVER_NAME + ": PHY (0x%x, 0x%x) = %s detected\n", uiID1, uiID2, szName); + + return cRes; +} + +/*********************************************************************** + * @Function: ns7520_mii_read + * @Return: the data read from PHY register uiRegister + * @Descr: the data read may be invalid if timed out. If so, a message + * is printed but the invalid data is returned. + * The fixed device address is being used. + ***********************************************************************/ + +static unsigned short ns7520_mii_read(unsigned short uiRegister) +{ + DEBUG_FN(DEBUG_MII_LOW); + + /* write MII register to be read */ + *get_eth_reg_addr(NS7520_ETH_MADR) = + CONFIG_PHY_ADDR << 8 | uiRegister; + + *get_eth_reg_addr(NS7520_ETH_MCMD) = NS7520_ETH_MCMD_READ; + + if (!ns7520_mii_poll_busy()) + printk(KERN_WARNING NS7520_DRIVER_NAME + ": MII still busy in read\n"); + /* continue to read */ + + *get_eth_reg_addr(NS7520_ETH_MCMD) = 0; + + return (unsigned short) (*get_eth_reg_addr(NS7520_ETH_MRDD)); +} + +/*********************************************************************** + * @Function: ns7520_mii_write + * @Return: nothing + * @Descr: writes the data to the PHY register. In case of a timeout, + * no special handling is performed but a message printed + * The fixed device address is being used. + ***********************************************************************/ + +static void ns7520_mii_write(unsigned short uiRegister, + unsigned short uiData) +{ + DEBUG_FN(DEBUG_MII_LOW); + + /* write MII register to be written */ + *get_eth_reg_addr(NS7520_ETH_MADR) = + CONFIG_PHY_ADDR << 8 | uiRegister; + + *get_eth_reg_addr(NS7520_ETH_MWTD) = uiData; + + if (!ns7520_mii_poll_busy()) { + printf(KERN_WARNING NS7520_DRIVER_NAME + ": MII still busy in write\n"); + } +} + +/*********************************************************************** + * @Function: ns7520_mii_get_clock_divisor + * @Return: the clock divisor that should be used in NS7520_ETH_MCFG_CLKS + * @Descr: if no clock divisor can be calculated for the + * current SYSCLK and the maximum MDIO Clock, a warning is printed + * and the greatest divisor is taken + ***********************************************************************/ + +static unsigned int ns7520_mii_get_clock_divisor(unsigned int unMaxMDIOClk) +{ + struct { + unsigned int unSysClkDivisor; + unsigned int unClks; /* field for NS7520_ETH_MCFG_CLKS */ + } PHYClockDivisors[] = { + { + 4, NS7520_ETH_MCFG_CLKS_4}, { + 6, NS7520_ETH_MCFG_CLKS_6}, { + 8, NS7520_ETH_MCFG_CLKS_8}, { + 10, NS7520_ETH_MCFG_CLKS_10}, { + 14, NS7520_ETH_MCFG_CLKS_14}, { + 20, NS7520_ETH_MCFG_CLKS_20}, { + 28, NS7520_ETH_MCFG_CLKS_28} + }; + + int nIndexSysClkDiv; + int nArraySize = + sizeof(PHYClockDivisors) / sizeof(PHYClockDivisors[0]); + unsigned int unClks = NS7520_ETH_MCFG_CLKS_28; /* defaults to + greatest div */ + + DEBUG_FN(DEBUG_INIT); + + for (nIndexSysClkDiv = 0; nIndexSysClkDiv < nArraySize; + nIndexSysClkDiv++) { + /* find first sysclock divisor that isn't higher than 2.5 MHz + clock */ + if (NETARM_XTAL_FREQ / + PHYClockDivisors[nIndexSysClkDiv].unSysClkDivisor <= + unMaxMDIOClk) { + unClks = PHYClockDivisors[nIndexSysClkDiv].unClks; + break; + } + } + + DEBUG_ARGS2(DEBUG_INIT, + "Taking MDIO Clock bit mask 0x%0x for max clock %i\n", + unClks, unMaxMDIOClk); + + /* return greatest divisor */ + return unClks; +} + +/*********************************************************************** + * @Function: ns7520_mii_poll_busy + * @Return: 0 if timed out otherwise the remaing timeout + * @Descr: waits until the MII has completed a command or it times out + * code may be interrupted by hard interrupts. + * It is not checked what happens on multiple actions when + * the first is still being busy and we timeout. + ***********************************************************************/ + +static unsigned int ns7520_mii_poll_busy(void) +{ + unsigned int unTimeout = 1000; + + DEBUG_FN(DEBUG_MII_LOW); + + while (((*get_eth_reg_addr(NS7520_ETH_MIND) & NS7520_ETH_MIND_BUSY) + == NS7520_ETH_MIND_BUSY) && unTimeout) + unTimeout--; + + return unTimeout; +} + +/* ---------------------------------------------------------------------------- + * Net+ARM ethernet MII functionality. + */ +#if defined(CONFIG_MII) + +/** + * Maximum MII address we support + */ +#define MII_ADDRESS_MAX (31) + +/** + * Maximum MII register address we support + */ +#define MII_REGISTER_MAX (31) + +/** + * Ethernet MII interface return values for public functions. + */ +enum mii_status { + MII_STATUS_SUCCESS = 0, + MII_STATUS_FAILURE = 1, +}; + +/** + * Read a 16-bit value from an MII register. + */ +extern int miiphy_read(unsigned char const addr, unsigned char const reg, + unsigned short *const value) +{ + int ret = MII_STATUS_FAILURE; + + /* Parameter checks */ + if (addr > MII_ADDRESS_MAX) { + ERROR(("invalid addr, 0x%02X", addr)); + goto miiphy_read_failed_0; + } + + if (reg > MII_REGISTER_MAX) { + ERROR(("invalid reg, 0x%02X", reg)); + goto miiphy_read_failed_0; + } + + if (value == NULL) { + ERROR(("NULL value")); + goto miiphy_read_failed_0; + } + + DEBUG_FN(DEBUG_MII_LOW); + + /* write MII register to be read */ + *get_eth_reg_addr(NS7520_ETH_MADR) = (addr << 8) | reg; + + *get_eth_reg_addr(NS7520_ETH_MCMD) = NS7520_ETH_MCMD_READ; + + if (!ns7520_mii_poll_busy()) + printk(KERN_WARNING NS7520_DRIVER_NAME + ": MII still busy in read\n"); + /* continue to read */ + + *get_eth_reg_addr(NS7520_ETH_MCMD) = 0; + + *value = (*get_eth_reg_addr(NS7520_ETH_MRDD)); + ret = MII_STATUS_SUCCESS; + /* Fall through */ + + miiphy_read_failed_0: + return (ret); +} + +/** + * Write a 16-bit value to an MII register. + */ +extern int miiphy_write(unsigned char const addr, unsigned char const reg, + unsigned short const value) +{ + int ret = MII_STATUS_FAILURE; + + /* Parameter checks */ + if (addr > MII_ADDRESS_MAX) { + ERROR(("invalid addr, 0x%02X", addr)); + goto miiphy_write_failed_0; + } + + if (reg > MII_REGISTER_MAX) { + ERROR(("invalid reg, 0x%02X", reg)); + goto miiphy_write_failed_0; + } + + /* write MII register to be written */ + *get_eth_reg_addr(NS7520_ETH_MADR) = (addr << 8) | reg; + + *get_eth_reg_addr(NS7520_ETH_MWTD) = value; + + if (!ns7520_mii_poll_busy()) { + printf(KERN_WARNING NS7520_DRIVER_NAME + ": MII still busy in write\n"); + } + + ret = MII_STATUS_SUCCESS; + /* Fall through */ + + miiphy_write_failed_0: + return (ret); +} +#endif /* defined(CONFIG_MII) */ +#endif /* CONFIG_DRIVER_NS7520_ETHERNET */ diff --git a/include/asm-arm/arch-arm720t/netarm_gen_module.h b/include/asm-arm/arch-arm720t/netarm_gen_module.h index 90d9da8174..13656a3ad2 100644 --- a/include/asm-arm/arch-arm720t/netarm_gen_module.h +++ b/include/asm-arm/arch-arm720t/netarm_gen_module.h @@ -1,6 +1,9 @@ /* * include/asm-armnommu/arch-netarm/netarm_gen_module.h * + * Copyright (C) 2005 + * Art Shipkowski, Videon Central, Inc., + * * Copyright (C) 2000, 2001 NETsilicon, Inc. * Copyright (C) 2000, 2001 Red Hat, Inc. * @@ -27,6 +30,8 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * * author(s) : Joe deBlaquiere + * + * Modified to support NS7520 by Art Shipkowski. */ #ifndef __NETARM_GEN_MODULE_REGISTERS_H @@ -49,7 +54,9 @@ #define NETARM_GEN_TIMER2_STATUS (0x1c) #define NETARM_GEN_PORTA (0x20) +#ifndef CONFIG_NETARM_NS7520 #define NETARM_GEN_PORTB (0x24) +#endif #define NETARM_GEN_PORTC (0x28) #define NETARM_GEN_INTR_ENABLE (0x30) @@ -128,8 +135,14 @@ /* PORT C Register ( 0xFFB0_0028 ) */ +#ifndef CONFIG_NETARM_NS7520 #define NETARM_GEN_PORT_MODE(x) (((x)<<24) + (0xFF00)) #define NETARM_GEN_PORT_DIR(x) (((x)<<16) + (0xFF00)) +#else +#define NETARM_GEN_PORT_MODE(x) ((x)<<24) +#define NETARM_GEN_PORT_DIR(x) ((x)<<16) +#define NETARM_GEN_PORT_CSF(x) ((x)<<8) +#endif /* Timer Registers ( 0xFFB0_0010 0xFFB0_0018 ) */ @@ -143,10 +156,15 @@ #define NETARM_GEN_TCTL_INIT_COUNT(x) ((x) & 0x1FF) #define NETARM_GEN_TSTAT_INTPEN (0x40000000) +#if ~defined(CONFIG_NETARM_NS7520) #define NETARM_GEN_TSTAT_CTC_MASK (0x000001FF) +#else +#define NETARM_GEN_TSTAT_CTC_MASK (0x0FFFFFFF) +#endif /* prescale to msecs conversion */ +#if !defined(CONFIG_NETARM_PLL_BYPASS) #define NETARM_GEN_TIMER_MSEC_P(x) ( ( ( 20480 ) * ( 0x1FF - ( (x) & \ NETARM_GEN_TSTAT_CTC_MASK ) + \ 1 ) ) / (NETARM_XTAL_FREQ/1000) ) @@ -155,9 +173,7 @@ NETARM_GEN_TSTAT_CTC_MASK ) | \ NETARM_GEN_TCTL_USE_PRESCALE ) -#if 0 -/* ifdef CONFIG_NETARM_PLL_BYPASS else */ -#error test +#else #define NETARM_GEN_TIMER_MSEC_P(x) ( ( ( 4096 ) * ( 0x1FF - ( (x) & \ NETARM_GEN_TSTAT_CTC_MASK ) + \ 1 ) ) / (NETARM_XTAL_FREQ/1000) ) diff --git a/include/asm-arm/arch-arm720t/netarm_mem_module.h b/include/asm-arm/arch-arm720t/netarm_mem_module.h index 7c63d176a9..f0529fd09b 100644 --- a/include/asm-arm/arch-arm720t/netarm_mem_module.h +++ b/include/asm-arm/arch-arm720t/netarm_mem_module.h @@ -1,6 +1,9 @@ /* * include/asm-armnommu/arch-netarm/netarm_mem_module.h * + * Copyright (C) 2005 + * Art Shipkowski, Videon Central, Inc., + * * Copyright (C) 2000, 2001 NETsilicon, Inc. * Copyright (C) 2000, 2001 Red Hat, Inc. * @@ -27,6 +30,8 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * * author(s) : Joe deBlaquiere + * + * Modified to support NS7520 by Art Shipkowski. */ #ifndef __NETARM_MEM_MODULE_REGISTERS_H @@ -154,4 +159,26 @@ #define NETARM_MEM_OPT_WRITE_ASYNC (0x00000000) #define NETARM_MEM_OPT_WRITE_SYNC (0x00000001) +#ifdef CONFIG_NETARM_NS7520 +/* The NS7520 has a second options register for each chip select */ +#define NETARM_MEM_CS0_OPTIONS_B (0x18) +#define NETARM_MEM_CS1_OPTIONS_B (0x28) +#define NETARM_MEM_CS2_OPTIONS_B (0x38) +#define NETARM_MEM_CS3_OPTIONS_B (0x48) +#define NETARM_MEM_CS4_OPTIONS_B (0x58) + +/* Option B Registers (0xFFC0_00x8) */ +#define NETARM_MEM_OPTB_SYNC_1_STAGE (0x00000001) +#define NETARM_MEM_OPTB_SYNC_2_STAGE (0x00000002) +#define NETARM_MEM_OPTB_BCYC_PLUS0 (0x00000000) +#define NETARM_MEM_OPTB_BCYC_PLUS4 (0x00000004) +#define NETARM_MEM_OPTB_BCYC_PLUS8 (0x00000008) +#define NETARM_MEM_OPTB_BCYC_PLUS12 (0x0000000C) + +#define NETARM_MEM_OPTB_WAIT_PLUS0 (0x00000000) +#define NETARM_MEM_OPTB_WAIT_PLUS16 (0x00000010) +#define NETARM_MEM_OPTB_WAIT_PLUS32 (0x00000020) +#define NETARM_MEM_OPTB_WAIT_PLUS48 (0x00000030) +#endif + #endif diff --git a/include/asm-arm/arch-arm720t/netarm_registers.h b/include/asm-arm/arch-arm720t/netarm_registers.h index 029c7f4c74..fa8812879a 100644 --- a/include/asm-arm/arch-arm720t/netarm_registers.h +++ b/include/asm-arm/arch-arm720t/netarm_registers.h @@ -1,6 +1,9 @@ /* * linux/include/asm-arm/arch-netarm/netarm_registers.h * + * Copyright (C) 2005 + * Art Shipkowski, Videon Central, Inc., + * * Copyright (C) 2000, 2001 NETsilicon, Inc. * Copyright (C) 2000, 2001 WireSpeed Communications Corporation * @@ -27,6 +30,8 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * * author(s) : Joe deBlaquiere + * + * Modified to support NS7520 by Art Shipkowski. */ #ifndef __NET_ARM_REGISTERS_H @@ -38,6 +43,8 @@ /* the input crystal/clock frequency ( in Hz ) */ #define NETARM_XTAL_FREQ_25MHz (18432000) #define NETARM_XTAL_FREQ_33MHz (23698000) +#define NETARM_XTAL_FREQ_48MHz (48000000) +#define NETARM_XTAL_FREQ_55MHz (55000000) #define NETARM_XTAL_FREQ_EMLIN1 (20000000) /* the frequency of SYS_CLK */ @@ -60,12 +67,22 @@ #define NETARM_PLL_COUNT_VAL 4 #define NETARM_XTAL_FREQ NETARM_XTAL_FREQ_25MHz -#else /* CONFIG_NETARM_NET50 */ +#elif defined(CONFIG_NETARM_NET50) /* NET+50 boards: 40 MHz (with NETARM_XTAL_FREQ_25MHz) */ #define NETARM_PLL_COUNT_VAL 8 #define NETARM_XTAL_FREQ NETARM_XTAL_FREQ_25MHz +#else /* CONFIG_NETARM_NS7520 */ + +#define NETARM_PLL_COUNT_VAL 0 + +#if defined(CONFIG_BOARD_UNC20) +#define NETARM_XTAL_FREQ NETARM_XTAL_FREQ_48MHz +#else +#define NETARM_XTAL_FREQ NETARM_XTAL_FREQ_55MHz +#endif + #endif /* #include "arm_registers.h" */ diff --git a/include/configs/AP1000.h b/include/configs/AP1000.h index d9c4b5bd6e..c34d650aa2 100644 --- a/include/configs/AP1000.h +++ b/include/configs/AP1000.h @@ -24,14 +24,14 @@ #undef DEBUG -#define CONFIG_405 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ +#define CONFIG_405 1 /* This is a PPC405 CPU */ +#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_AP1000 1 /* ...on an AP1000 board */ #define CONFIG_PCI 1 -#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ +#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ #define CFG_PROMPT "0> " #define CFG_PROMPT_HUSH_PS2 "> " @@ -39,7 +39,7 @@ #define CONFIG_COMMAND_HISTORY 1 #define CONFIG_COMPLETE_ADDRESSES 1 -#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_IS_IN_FLASH 1 #define CFG_FLASH_USE_BUFFER_WRITE #ifdef CFG_ENV_IS_IN_NVRAM @@ -50,39 +50,37 @@ #endif #endif -#define CONFIG_BAUDRATE 57600 +#define CONFIG_BAUDRATE 57600 #define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ -#define CONFIG_BOOTCOMMAND "" /* autoboot command */ +#define CONFIG_BOOTCOMMAND "" /* autoboot command */ /* Size (bytes) of interrupt driven serial port buffer. * Set to 0 to use polling instead of interrupts. * Setting to 0 will also disable RTS/CTS handshaking. */ -#undef CONFIG_SERIAL_SOFTWARE_FIFO +#undef CONFIG_SERIAL_SOFTWARE_FIFO -#define CONFIG_BOOTARGS "console=ttyS0,57600" +#define CONFIG_BOOTARGS "console=ttyS0,57600" -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - - -#define CONFIG_COMMANDS ( (CONFIG_CMD_DFL & \ - (~CFG_CMD_RTC) & ~(CFG_CMD_I2C)) | \ - CFG_CMD_IRQ | \ - CFG_CMD_PCI | \ - CFG_CMD_DHCP | \ - CFG_CMD_ASKENV | \ - CFG_CMD_ELF | \ - CFG_CMD_PING | \ - CFG_CMD_MVENV \ - ) +#define CONFIG_COMMANDS ( (CONFIG_CMD_DFL & \ + (~CFG_CMD_RTC) & ~(CFG_CMD_I2C)) | \ + CFG_CMD_IRQ | \ + CFG_CMD_PCI | \ + CFG_CMD_DHCP | \ + CFG_CMD_ASKENV | \ + CFG_CMD_ELF | \ + CFG_CMD_PING | \ + CFG_CMD_MVENV \ + ) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include -#undef CONFIG_WATCHDOG /* watchdog disabled */ +#undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SYS_CLK_FREQ 30000000 @@ -91,20 +89,20 @@ /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LONGHELP /* undef to save memory */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif /* usually: (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) */ #define CFG_PBSIZE (CFG_CBSIZE+4+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_ALT_MEMTEST 1 -#define CFG_MEMTEST_START 0x00400000 /* memtest works on */ -#define CFG_MEMTEST_END 0x01000000 /* 4 ... 16 MB in DRAM */ +#define CFG_ALT_MEMTEST 1 +#define CFG_MEMTEST_START 0x00400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x01000000 /* 4 ... 16 MB in DRAM */ /* * If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1. @@ -115,86 +113,84 @@ * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock, * set Linux BASE_BAUD to 403200. */ -#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */ -#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ +#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */ +#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ -#define CFG_NS16550_CLK 40000000 -#define CFG_DUART_CHAN 0 +#define CFG_NS16550_CLK 40000000 +#define CFG_DUART_CHAN 0 #define CFG_NS16550_COM1 (0x4C000000 + 0x1000) #define CFG_NS16550_COM2 (0x4C800000 + 0x1000) #define CFG_NS16550_REG_SIZE 4 #define CFG_NS16550 1 -#define CFG_INIT_CHAN1 1 -#define CFG_INIT_CHAN2 0 +#define CFG_INIT_CHAN1 1 +#define CFG_INIT_CHAN2 0 /* The following table includes the supported baudrates */ #define CFG_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} -#define CFG_LOAD_ADDR 0x00100000 /* default load address */ -#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ - -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ - +#define CFG_LOAD_ADDR 0x00100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) * Please note that CFG_SDRAM_BASE _must_ start at 0 */ -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_FLASH_BASE 0x20000000 +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE 0x20000000 #define CFG_MONITOR_BASE TEXT_BASE -#define CFG_MONITOR_LEN (192 * 1024) /* Reserve 196 kB for Monitor */ -#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ +#define CFG_MONITOR_LEN (192 * 1024) /* Reserve 196 kB for Monitor */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_FLASH_CFI 1 +#define CFG_FLASH_CFI 1 #define CFG_PROGFLASH_BASE CFG_FLASH_BASE #define CFG_CONFFLASH_BASE 0x24000000 -#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ -#define CFG_FLASH_PROTECTION 1 /* use hardware protection */ +#define CFG_FLASH_PROTECTION 1 /* use hardware protection */ /* BEG ENVIRONNEMENT FLASH */ #ifdef CFG_ENV_IS_IN_FLASH -#define CFG_ENV_OFFSET 0x00040000 /* Offset of Environment Sector */ -#define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ +#define CFG_ENV_OFFSET 0x00040000 /* Offset of Environment Sector */ +#define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ #define CFG_ENV_SECT_SIZE 0x20000 /* see README - env sector total size */ #endif /* END ENVIRONNEMENT FLASH */ /*----------------------------------------------------------------------- * NVRAM organization */ -#define CFG_NVRAM_BASE_ADDR 0xf0000000 /* NVRAM base address */ -#define CFG_NVRAM_SIZE 0x1ff8 /* NVRAM size */ +#define CFG_NVRAM_BASE_ADDR 0xf0000000 /* NVRAM base address */ +#define CFG_NVRAM_SIZE 0x1ff8 /* NVRAM size */ #ifdef CFG_ENV_IS_IN_NVRAM -#define CFG_ENV_SIZE 0x1000 /* Size of Environment vars */ -#define CFG_ENV_ADDR \ - (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE) /* Env */ +#define CFG_ENV_SIZE 0x1000 /* Size of Environment vars */ +#define CFG_ENV_ADDR \ + (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE) /* Env */ #endif /*----------------------------------------------------------------------- * Cache Configuration */ -#define CFG_DCACHE_SIZE 16384 +#define CFG_DCACHE_SIZE 16384 #define CFG_CACHELINE_SIZE 32 #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif /* @@ -203,9 +199,8 @@ * BR0/1 and OR0/1 (FLASH) */ -#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */ -#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */ - +#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */ +#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */ /* Configuration Port location */ #define CONFIG_PORT_ADDR 0xF0000500 @@ -214,29 +209,29 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CFG_INIT_RAM_ADDR 0x400000 /* inside of SDRAM */ -#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CFG_INIT_RAM_ADDR 0x400000 /* inside of SDRAM */ +#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */ #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET /*----------------------------------------------------------------------- * Definitions for Serial Presence Detect EEPROM address * (to get SDRAM settings) */ -#define SPD_EEPROM_ADDRESS 0x50 +#define SPD_EEPROM_ADDRESS 0x50 /* * Internal Definitions * * Boot Flags */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* JFFS2 stuff */ @@ -248,8 +243,8 @@ #define CONFIG_NET_MULTI #define CONFIG_E1000 -#define CFG_ETH_DEV_FN 0x0800 -#define CFG_ETH_IOBASE 0x31000000 -#define CFG_ETH_MEMBASE 0x32000000 +#define CFG_ETH_DEV_FN 0x0800 +#define CFG_ETH_IOBASE 0x31000000 +#define CFG_ETH_MEMBASE 0x32000000 -#endif /* __CONFIG_H */ +#endif /* __CONFIG_H */ diff --git a/include/ns7520_eth.h b/include/ns7520_eth.h new file mode 100644 index 0000000000..5019802a33 --- /dev/null +++ b/include/ns7520_eth.h @@ -0,0 +1,335 @@ +/*********************************************************************** + * + * Copyright 2003 by FS Forth-Systeme GmbH. + * All rights reserved. + * + * $Id$ + * @Author: Markus Pietrek + * @Descr: Defines the NS7520 ethernet registers. + * Stick with the old ETH prefix names instead going to the + * new EFE names in the manual. + * NS7520_ETH_* refer to NS7520 Hardware + * Reference/January 2003 [1] + * PHY_LXT971_* refer to Intel LXT971 Datasheet + * #249414 Rev. 02 [2] + * Partly derived from netarm_eth_module.h + * + * Modified by Arthur Shipkowski from the + * Linux version to be properly formatted for U-Boot (i.e. no C++ comments) + * + ***********************************************************************/ + +#ifndef FS_NS7520_ETH_H +#define FS_NS7520_ETH_H + +#ifdef CONFIG_DRIVER_NS7520_ETHERNET + +#include "lxt971a.h" + +/* The port addresses */ + +#define NS7520_ETH_MODULE_BASE (0xFF800000) + +#define get_eth_reg_addr(c) \ + ((volatile unsigned int*) ( NS7520_ETH_MODULE_BASE+(unsigned int) (c))) +#define NS7520_ETH_EGCR (0x0000) /* Ethernet Gen Control */ +#define NS7520_ETH_EGSR (0x0004) /* Ethernet Gen Status */ +#define NS7520_ETH_FIFO (0x0008) /* FIFO Data */ +#define NS7520_ETH_FIFOL (0x000C) /* FIFO Data Last */ +#define NS7520_ETH_ETSR (0x0010) /* Ethernet Transmit Status */ +#define NS7520_ETH_ERSR (0x0014) /* Ethernet Receive Status */ +#define NS7520_ETH_MAC1 (0x0400) /* MAC Config 1 */ +#define NS7520_ETH_MAC2 (0x0404) /* MAC Config 2 */ +#define NS7520_ETH_IPGT (0x0408) /* Back2Back InterPacket Gap */ +#define NS7520_ETH_IPGR (0x040C) /* non back2back InterPacket Gap */ +#define NS7520_ETH_CLRT (0x0410) /* Collision Window/Retry */ +#define NS7520_ETH_MAXF (0x0414) /* Maximum Frame Register */ +#define NS7520_ETH_SUPP (0x0418) /* PHY Support */ +#define NS7520_ETH_TEST (0x041C) /* Test Register */ +#define NS7520_ETH_MCFG (0x0420) /* MII Management Configuration */ +#define NS7520_ETH_MCMD (0x0424) /* MII Management Command */ +#define NS7520_ETH_MADR (0x0428) /* MII Management Address */ +#define NS7520_ETH_MWTD (0x042C) /* MII Management Write Data */ +#define NS7520_ETH_MRDD (0x0430) /* MII Management Read Data */ +#define NS7520_ETH_MIND (0x0434) /* MII Management Indicators */ +#define NS7520_ETH_SMII (0x0438) /* SMII Status Register */ +#define NS7520_ETH_SA1 (0x0440) /* Station Address 1 */ +#define NS7520_ETH_SA2 (0x0444) /* Station Address 2 */ +#define NS7520_ETH_SA3 (0x0448) /* Station Address 3 */ +#define NS7520_ETH_SAFR (0x05C0) /* Station Address Filter */ +#define NS7520_ETH_HT1 (0x05D0) /* Hash Table 1 */ +#define NS7520_ETH_HT2 (0x05D4) /* Hash Table 2 */ +#define NS7520_ETH_HT3 (0x05D8) /* Hash Table 3 */ +#define NS7520_ETH_HT4 (0x05DC) /* Hash Table 4 */ + +/* EGCR Ethernet General Control Register Bit Fields*/ + +#define NS7520_ETH_EGCR_ERX (0x80000000) /* Enable Receive FIFO */ +#define NS7520_ETH_EGCR_ERXDMA (0x40000000) /* Enable Receive DMA */ +#define NS7520_ETH_EGCR_ERXLNG (0x20000000) /* Accept Long packets */ +#define NS7520_ETH_EGCR_ERXSHT (0x10000000) /* Accept Short packets */ +#define NS7520_ETH_EGCR_ERXREG (0x08000000) /* Enable Receive Data Interrupt */ +#define NS7520_ETH_EGCR_ERFIFOH (0x04000000) /* Enable Receive Half-Full Int */ +#define NS7520_ETH_EGCR_ERXBR (0x02000000) /* Enable Receive buffer ready */ +#define NS7520_ETH_EGCR_ERXBAD (0x01000000) /* Accept bad receive packets */ +#define NS7520_ETH_EGCR_ETX (0x00800000) /* Enable Transmit FIFO */ +#define NS7520_ETH_EGCR_ETXDMA (0x00400000) /* Enable Transmit DMA */ +#define NS7520_ETH_EGCR_ETXWM_R (0x00300000) /* Enable Transmit FIFO mark Reserv */ +#define NS7520_ETH_EGCR_ETXWM_75 (0x00200000) /* Enable Transmit FIFO mark 75% */ +#define NS7520_ETH_EGCR_ETXWM_50 (0x00100000) /* Enable Transmit FIFO mark 50% */ +#define NS7520_ETH_EGCR_ETXWM_25 (0x00000000) /* Enable Transmit FIFO mark 25% */ +#define NS7520_ETH_EGCR_ETXREG (0x00080000) /* Enable Transmit Data Read Int */ +#define NS7520_ETH_EGCR_ETFIFOH (0x00040000) /* Enable Transmit Fifo Half Int */ +#define NS7520_ETH_EGCR_ETXBC (0x00020000) /* Enable Transmit Buffer Compl Int */ +#define NS7520_ETH_EGCR_EFULLD (0x00010000) /* Enable Full Duplex Operation */ +#define NS7520_ETH_EGCR_MODE_MA (0x0000C000) /* Mask */ +#define NS7520_ETH_EGCR_MODE_SEE (0x0000C000) /* 10 Mbps SEEQ ENDEC PHY */ +#define NS7520_ETH_EGCR_MODE_LEV (0x00008000) /* 10 Mbps Level1 ENDEC PHY */ +#define NS7520_ETH_EGCR_RES1 (0x00002000) /* Reserved */ +#define NS7520_ETH_EGCR_RXCINV (0x00001000) /* Invert the receive clock input */ +#define NS7520_ETH_EGCR_TXCINV (0x00000800) /* Invert the transmit clock input */ +#define NS7520_ETH_EGCR_PNA (0x00000400) /* pSOS pNA buffer */ +#define NS7520_ETH_EGCR_MAC_RES (0x00000200) /* MAC Software reset */ +#define NS7520_ETH_EGCR_ITXA (0x00000100) /* Insert Transmit Source Address */ +#define NS7520_ETH_EGCR_ENDEC_MA (0x000000FC) /* ENDEC media control bits */ +#define NS7520_ETH_EGCR_EXINT_MA (0x00000003) /* Mask */ +#define NS7520_ETH_EGCR_EXINT_RE (0x00000003) /* Reserved */ +#define NS7520_ETH_EGCR_EXINT_TP (0x00000002) /* TP-PMD Mode */ +#define NS7520_ETH_EGCR_EXINT_10 (0x00000001) /* 10-MBit Mode */ +#define NS7520_ETH_EGCR_EXINT_NO (0x00000000) /* MII normal operation */ + +/* EGSR Ethernet General Status Register Bit Fields*/ + +#define NS7520_ETH_EGSR_RES1 (0xC0000000) /* Reserved */ +#define NS7520_ETH_EGSR_RXFDB_MA (0x30000000) /* Receive FIFO mask */ +#define NS7520_ETH_EGSR_RXFDB_3 (0x30000000) /* Receive FIFO 3 bytes available */ +#define NS7520_ETH_EGSR_RXFDB_2 (0x20000000) /* Receive FIFO 2 bytes available */ +#define NS7520_ETH_EGCR_RXFDB_1 (0x10000000) /* Receive FIFO 1 Bytes available */ +#define NS7520_ETH_EGCR_RXFDB_4 (0x00000000) /* Receive FIFO 4 Bytes available */ +#define NS7520_ETH_EGSR_RXREGR (0x08000000) /* Receive Register Ready */ +#define NS7520_ETH_EGSR_RXFIFOH (0x04000000) /* Receive FIFO Half Full */ +#define NS7520_ETH_EGSR_RXBR (0x02000000) /* Receive Buffer Ready */ +#define NS7520_ETH_EGSR_RXSKIP (0x01000000) /* Receive Buffer Skip */ +#define NS7520_ETH_EGSR_RES2 (0x00F00000) /* Reserved */ +#define NS7520_ETH_EGSR_TXREGE (0x00080000) /* Transmit Register Empty */ +#define NS7520_ETH_EGSR_TXFIFOH (0x00040000) /* Transmit FIFO half empty */ +#define NS7520_ETH_EGSR_TXBC (0x00020000) /* Transmit buffer complete */ +#define NS7520_ETH_EGSR_TXFIFOE (0x00010000) /* Transmit FIFO empty */ +#define NS7520_ETH_EGSR_RXPINS (0x0000FC00) /* ENDEC Phy Status */ +#define NS7520_ETH_EGSR_RES3 (0x000003FF) /* Reserved */ + +/* ETSR Ethernet Transmit Status Register Bit Fields*/ + +#define NS7520_ETH_ETSR_RES1 (0xFFFF0000) /* Reserved */ +#define NS7520_ETH_ETSR_TXOK (0x00008000) /* Packet transmitted OK */ +#define NS7520_ETH_ETSR_TXBR (0x00004000) /* Broadcast packet transmitted */ +#define NS7520_ETH_ETSR_TXMC (0x00002000) /* Multicast packet transmitted */ +#define NS7520_ETH_ETSR_TXAL (0x00001000) /* Transmit abort - late collision */ +#define NS7520_ETH_ETSR_TXAED (0x00000800) /* Transmit abort - deferral */ +#define NS7520_ETH_ETSR_TXAEC (0x00000400) /* Transmit abort - exc collisions */ +#define NS7520_ETH_ETSR_TXAUR (0x00000200) /* Transmit abort - underrun */ +#define NS7520_ETH_ETSR_TXAJ (0x00000100) /* Transmit abort - jumbo */ +#define NS7520_ETH_ETSR_RES2 (0x00000080) /* Reserved */ +#define NS7520_ETH_ETSR_TXDEF (0x00000040) /* Transmit Packet Deferred */ +#define NS7520_ETH_ETSR_TXCRC (0x00000020) /* Transmit CRC error */ +#define NS7520_ETH_ETSR_RES3 (0x00000010) /* Reserved */ +#define NS7520_ETH_ETSR_TXCOLC (0x0000000F) /* Transmit Collision Count */ + +/* ERSR Ethernet Receive Status Register Bit Fields*/ + +#define NS7520_ETH_ERSR_RXSIZE (0xFFFF0000) /* Receive Buffer Size */ +#define NS7520_ETH_ERSR_RXCE (0x00008000) /* Receive Carrier Event */ +#define NS7520_ETH_ERSR_RXDV (0x00004000) /* Receive Data Violation Event */ +#define NS7520_ETH_ERSR_RXOK (0x00002000) /* Receive Packet OK */ +#define NS7520_ETH_ERSR_RXBR (0x00001000) /* Receive Broadcast Packet */ +#define NS7520_ETH_ERSR_RXMC (0x00000800) /* Receive Multicast Packet */ +#define NS7520_ETH_ERSR_RXCRC (0x00000400) /* Receive Packet has CRC error */ +#define NS7520_ETH_ERSR_RXDR (0x00000200) /* Receive Packet has dribble error */ +#define NS7520_ETH_ERSR_RXCV (0x00000100) /* Receive Packet code violation */ +#define NS7520_ETH_ERSR_RXLNG (0x00000080) /* Receive Packet too long */ +#define NS7520_ETH_ERSR_RXSHT (0x00000040) /* Receive Packet too short */ +#define NS7520_ETH_ERSR_ROVER (0x00000020) /* Recive overflow */ +#define NS7520_ETH_ERSR_RES (0x0000001F) /* Reserved */ + +/* MAC1 MAC Configuration Register 1 Bit Fields*/ + +#define NS7520_ETH_MAC1_RES1 (0xFFFF0000) /* Reserved */ +#define NS7520_ETH_MAC1_SRST (0x00008000) /* Soft Reset */ +#define NS7520_ETH_MAC1_SIMMRST (0x00004000) /* Simulation Reset */ +#define NS7520_ETH_MAC1_RES2 (0x00003000) /* Reserved */ +#define NS7520_ETH_MAC1_RPEMCSR (0x00000800) /* Reset PEMCS/RX */ +#define NS7520_ETH_MAC1_RPERFUN (0x00000400) /* Reset PERFUN */ +#define NS7520_ETH_MAC1_RPEMCST (0x00000200) /* Reset PEMCS/TX */ +#define NS7520_ETH_MAC1_RPETFUN (0x00000100) /* Reset PETFUN */ +#define NS7520_ETH_MAC1_RES3 (0x000000E0) /* Reserved */ +#define NS7520_ETH_MAC1_LOOPBK (0x00000010) /* Internal Loopback */ +#define NS7520_ETH_MAC1_TXFLOW (0x00000008) /* TX flow control */ +#define NS7520_ETH_MAC1_RXFLOW (0x00000004) /* RX flow control */ +#define NS7520_ETH_MAC1_PALLRX (0x00000002) /* Pass ALL receive frames */ +#define NS7520_ETH_MAC1_RXEN (0x00000001) /* Receive enable */ + +/* MAC Configuration Register 2 Bit Fields*/ + +#define NS7520_ETH_MAC2_RES1 (0xFFFF8000) /* Reserved */ +#define NS7520_ETH_MAC2_EDEFER (0x00004000) /* Excess Deferral */ +#define NS7520_ETH_MAC2_BACKP (0x00002000) /* Backpressure/NO back off */ +#define NS7520_ETH_MAC2_NOBO (0x00001000) /* No back off */ +#define NS7520_ETH_MAC2_RES2 (0x00000C00) /* Reserved */ +#define NS7520_ETH_MAC2_LONGP (0x00000200) /* Long Preable enforcement */ +#define NS7520_ETH_MAC2_PUREP (0x00000100) /* Pure preamble enforcement */ +#define NS7520_ETH_MAC2_AUTOP (0x00000080) /* Auto detect PAD enable */ +#define NS7520_ETH_MAC2_VLANP (0x00000040) /* VLAN pad enable */ +#define NS7520_ETH_MAC2_PADEN (0x00000020) /* PAD/CRC enable */ +#define NS7520_ETH_MAC2_CRCEN (0x00000010) /* CRC enable */ +#define NS7520_ETH_MAC2_DELCRC (0x00000008) /* Delayed CRC */ +#define NS7520_ETH_MAC2_HUGE (0x00000004) /* Huge frame enable */ +#define NS7520_ETH_MAC2_FLENC (0x00000002) /* Frame length checking */ +#define NS7520_ETH_MAC2_FULLD (0x00000001) /* Full duplex */ + +/* IPGT Back-to-Back Inter-Packet-Gap Register Bit Fields*/ + +#define NS7520_ETH_IPGT_RES (0xFFFFFF80) /* Reserved */ +#define NS7520_ETH_IPGT_IPGT (0x0000007F) /* Back-to-Back Interpacket Gap */ + +/* IPGR Non Back-to-Back Inter-Packet-Gap Register Bit Fields*/ + +#define NS7520_ETH_IPGR_RES1 (0xFFFF8000) /* Reserved */ +#define NS7520_ETH_IPGR_IPGR1 (0x00007F00) /* Non Back-to-back Interpacket Gap */ +#define NS7520_ETH_IPGR_RES2 (0x00000080) /* Reserved */ +#define NS7520_ETH_IPGR_IPGR2 (0x0000007F) /* Non back-to-back Interpacket Gap */ + +/* CLRT Collision Windows/Collision Retry Register Bit Fields*/ + +#define NS7520_ETH_CLRT_RES1 (0xFFFFC000) /* Reserved */ +#define NS7520_ETH_CLRT_CWIN (0x00003F00) /* Collision Windows */ +#define NS7520_ETH_CLRT_RES2 (0x000000F0) /* Reserved */ +#define NS7520_ETH_CLRT_RETX (0x0000000F) /* Retransmission maximum */ + +/* MAXF Maximum Frame Register Bit Fields*/ + +#define NS7520_ETH_MAXF_RES1 (0xFFFF0000) /* Reserved */ +#define NS7520_ETH_MAXF_MAXF (0x0000FFFF) /* Maximum frame length */ + +/* SUPP PHY Support Register Bit Fields*/ + +#define NS7520_ETH_SUPP_RES1 (0xFFFFFF00) /* Reserved */ +#define NS7520_ETH_SUPP_RPE100X (0x00000080) /* Reset PE100X module */ +#define NS7520_ETH_SUPP_FORCEQ (0x00000040) /* Force Quit */ +#define NS7520_ETH_SUPP_NOCIPH (0x00000020) /* No Cipher */ +#define NS7520_ETH_SUPP_DLINKF (0x00000010) /* Disable link fail */ +#define NS7520_ETH_SUPP_RPE10T (0x00000008) /* Reset PE10T module */ +#define NS7520_ETH_SUPP_RES2 (0x00000004) /* Reserved */ +#define NS7520_ETH_SUPP_JABBER (0x00000002) /* Enable Jabber protection */ +#define NS7520_ETH_SUPP_BITMODE (0x00000001) /* Bit Mode */ + +/* TEST Register Bit Fields*/ + +#define NS7520_ETH_TEST_RES1 (0xFFFFFFF8) /* Reserved */ +#define NS7520_ETH_TEST_TBACK (0x00000004) /* Test backpressure */ +#define NS7520_ETH_TEST_TPAUSE (0x00000002) /* Test Pause */ +#define NS7520_ETH_TEST_SPQ (0x00000001) /* Shortcut pause quanta */ + +/* MCFG MII Management Configuration Register Bit Fields*/ + +#define NS7520_ETH_MCFG_RES1 (0xFFFF0000) /* Reserved */ +#define NS7520_ETH_MCFG_RMIIM (0x00008000) /* Reset MII management */ +#define NS7520_ETH_MCFG_RES2 (0x00007FE0) /* Reserved */ +#define NS7520_ETH_MCFG_CLKS_MA (0x0000001C) /* Clock Select */ +#define NS7520_ETH_MCFG_CLKS_4 (0x00000004) /* Sysclk / 4 */ +#define NS7520_ETH_MCFG_CLKS_6 (0x00000008) /* Sysclk / 6 */ +#define NS7520_ETH_MCFG_CLKS_8 (0x0000000C) /* Sysclk / 8 */ +#define NS7520_ETH_MCFG_CLKS_10 (0x00000010) /* Sysclk / 10 */ +#define NS7520_ETH_MCFG_CLKS_14 (0x00000014) /* Sysclk / 14 */ +#define NS7520_ETH_MCFG_CLKS_20 (0x00000018) /* Sysclk / 20 */ +#define NS7520_ETH_MCFG_CLKS_28 (0x0000001C) /* Sysclk / 28 */ +#define NS7520_ETH_MCFG_SPRE (0x00000002) /* Suppress preamble */ +#define NS7520_ETH_MCFG_SCANI (0x00000001) /* Scan increment */ + +/* MCMD MII Management Command Register Bit Fields*/ + +#define NS7520_ETH_MCMD_RES1 (0xFFFFFFFC) /* Reserved */ +#define NS7520_ETH_MCMD_SCAN (0x00000002) /* Automatically Scan for Read Data */ +#define NS7520_ETH_MCMD_READ (0x00000001) /* Single scan for Read Data */ + +/* MCMD MII Management Address Register Bit Fields*/ + +#define NS7520_ETH_MADR_RES1 (0xFFFFE000) /* Reserved */ +#define NS7520_ETH_MADR_DADR (0x00001F00) /* MII PHY device address */ +#define NS7520_ETH_MADR_RES2 (0x000000E0) /* Reserved */ +#define NS7520_ETH_MADR_RADR (0x0000001F) /* MII PHY register address */ + +/* MWTD MII Management Write Data Register Bit Fields*/ + +#define NS7520_ETH_MWTD_RES1 (0xFFFF0000) /* Reserved */ +#define NS7520_ETH_MWTD_MWTD (0x0000FFFF) /* MII Write Data */ + +/* MRRD MII Management Read Data Register Bit Fields*/ + +#define NS7520_ETH_MRRD_RES1 (0xFFFF0000) /* Reserved */ +#define NS7520_ETH_MRRD_MRDD (0x0000FFFF) /* MII Read Data */ + +/* MIND MII Management Indicators Register Bit Fields*/ + +#define NS7520_ETH_MIND_RES1 (0xFFFFFFF8) /* Reserved */ +#define NS7520_ETH_MIND_NVALID (0x00000004) /* Read Data not valid */ +#define NS7520_ETH_MIND_SCAN (0x00000002) /* Automatically scan for read data */ +#define NS7520_ETH_MIND_BUSY (0x00000001) /* MII interface busy */ + +/* SMII Status Register Bit Fields*/ + +#define NS7520_ETH_SMII_RES1 (0xFFFFFFE0) /* Reserved */ +#define NS7520_ETH_SMII_CLASH (0x00000010) /* MAC-to-MAC with PHY */ +#define NS7520_ETH_SMII_JABBER (0x00000008) /* Jabber condition present */ +#define NS7520_ETH_SMII_LINK (0x00000004) /* Link OK */ +#define NS7520_ETH_SMII_DUPLEX (0x00000002) /* Full-duplex operation */ +#define NS7520_ETH_SMII_SPEED (0x00000001) /* 100 Mbps */ + +/* SA1 Station Address 1 Register Bit Fields*/ + +#define NS7520_ETH_SA1_RES1 (0xFFFF0000) /* Reserved */ +#define NS7520_ETH_SA1_OCTET1 (0x0000FF00) /* Station Address octet 1 */ +#define NS7520_ETH_SA1_OCTET2 (0x000000FF) /* Station Address octet 2 */ + +/* SA2 Station Address 2 Register Bit Fields*/ + +#define NS7520_ETH_SA2_RES1 (0xFFFF0000) /* Reserved */ +#define NS7520_ETH_SA2_OCTET3 (0x0000FF00) /* Station Address octet 3 */ +#define NS7520_ETH_SA2_OCTET4 (0x000000FF) /* Station Address octet 4 */ + +/* SA3 Station Address 3 Register Bit Fields*/ + +#define NS7520_ETH_SA3_RES1 (0xFFFF0000) /* Reserved */ +#define NS7520_ETH_SA3_OCTET5 (0x0000FF00) /* Station Address octet 5 */ +#define NS7520_ETH_SA3_OCTET6 (0x000000FF) /* Station Address octet 6 */ + +/* SAFR Station Address Filter Register Bit Fields*/ + +#define NS7520_ETH_SAFR_RES1 (0xFFFFFFF0) /* Reserved */ +#define NS7520_ETH_SAFR_PRO (0x00000008) /* Enable Promiscuous mode */ +#define NS7520_ETH_SAFR_PRM (0x00000004) /* Accept ALL multicast packets */ +#define NS7520_ETH_SAFR_PRA (0x00000002) /* Accept multicast packets table */ +#define NS7520_ETH_SAFR_BROAD (0x00000001) /* Accept ALL Broadcast packets */ + +/* HT1 Hash Table 1 Register Bit Fields*/ + +#define NS7520_ETH_HT1_RES1 (0xFFFF0000) /* Reserved */ +#define NS7520_ETH_HT1_HT1 (0x0000FFFF) /* CRC value 15-0 */ + +/* HT2 Hash Table 2 Register Bit Fields*/ + +#define NS7520_ETH_HT2_RES1 (0xFFFF0000) /* Reserved */ +#define NS7520_ETH_HT2_HT2 (0x0000FFFF) /* CRC value 31-16 */ + +/* HT3 Hash Table 3 Register Bit Fields*/ + +#define NS7520_ETH_HT3_RES1 (0xFFFF0000) /* Reserved */ +#define NS7520_ETH_HT3_HT3 (0x0000FFFF) /* CRC value 47-32 */ + +/* HT4 Hash Table 4 Register Bit Fields*/ + +#define NS7520_ETH_HT4_RES1 (0xFFFF0000) /* Reserved */ +#define NS7520_ETH_HT4_HT4 (0x0000FFFF) /* CRC value 63-48 */ + +#endif /* CONFIG_DRIVER_NS7520_ETHERNET */ + +#endif /* FS_NS7520_ETH_H */