From: Andy Fleming <afleming@freescale.com>
Date: Mon, 25 Mar 2013 07:33:14 +0000 (+0000)
Subject: e6500: Move L1 enablement after L2 enablement
X-Git-Tag: v2013.07-rc1~1^2~16^2~27
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=3e4c3137d6aefaf45a87bbad701fc336f3f24a3d;p=u-boot

e6500: Move L1 enablement after L2 enablement

The L1 D-cache on e6500 is write-through. This means that it's not
considered a good idea to have the L1 up and running if the L2 is
disabled. We don't actually *use* the L1 until after the L2 is
brought up on e6500, so go ahead and move the L1 enablement after
that code is done.

Signed-off-by: Andy Fleming <afleming@freescale.com>
---

diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index 2ce5505e00..5542d0afb2 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -173,52 +173,6 @@ l2_disabled:
 	mfspr	r1,DBSR
 	mtspr	DBSR,r1		/* Clear all valid bits */
 
-	/*
-	 *	Enable L1 Caches early
-	 *
-	 */
-
-#ifdef CONFIG_SYS_CACHE_STASHING
-	/* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
-	li	r2,(32 + 0)
-	mtspr	L1CSR2,r2
-#endif
-
-	/* Enable/invalidate the I-Cache */
-	lis	r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@h
-	ori	r2,r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@l
-	mtspr	SPRN_L1CSR1,r2
-1:
-	mfspr	r3,SPRN_L1CSR1
-	and.	r1,r3,r2
-	bne	1b
-
-	lis	r3,(L1CSR1_CPE|L1CSR1_ICE)@h
-	ori	r3,r3,(L1CSR1_CPE|L1CSR1_ICE)@l
-	mtspr	SPRN_L1CSR1,r3
-	isync
-2:
-	mfspr	r3,SPRN_L1CSR1
-	andi.	r1,r3,L1CSR1_ICE@l
-	beq	2b
-
-	/* Enable/invalidate the D-Cache */
-	lis	r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@h
-	ori	r2,r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@l
-	mtspr	SPRN_L1CSR0,r2
-1:
-	mfspr	r3,SPRN_L1CSR0
-	and.	r1,r3,r2
-	bne	1b
-
-	lis	r3,(L1CSR0_CPE|L1CSR0_DCE)@h
-	ori	r3,r3,(L1CSR0_CPE|L1CSR0_DCE)@l
-	mtspr	SPRN_L1CSR0,r3
-	isync
-2:
-	mfspr	r3,SPRN_L1CSR0
-	andi.	r1,r3,L1CSR0_DCE@l
-	beq	2b
 
 	.macro	create_tlb1_entry esel ts tsize epn wimg rpn perm phy_high scratch
 	lis	\scratch, FSL_BOOKE_MAS0(1, \esel, 0)@h
@@ -782,11 +736,57 @@ enable_l2_cluster_l2:
 	bne	1b
 	lis	r4, L2CSR0_L2E@h
 	sync
-	stw	r4, 0(r3)	/* eanble L2 */
+	stw	r4, 0(r3)	/* enable L2 */
 delete_ccsr_l2_tlb:
 	delete_tlb0_entry 0, CONFIG_SYS_CCSRBAR + 0xC20000, MAS2_I|MAS2_G, r3
 #endif
 
+	/*
+	 * Enable the L1. On e6500, this has to be done
+	 * after the L2 is up.
+	 */
+
+#ifdef CONFIG_SYS_CACHE_STASHING
+	/* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
+	li	r2,(32 + 0)
+	mtspr	L1CSR2,r2
+#endif
+
+	/* Enable/invalidate the I-Cache */
+	lis	r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@h
+	ori	r2,r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@l
+	mtspr	SPRN_L1CSR1,r2
+1:
+	mfspr	r3,SPRN_L1CSR1
+	and.	r1,r3,r2
+	bne	1b
+
+	lis	r3,(L1CSR1_CPE|L1CSR1_ICE)@h
+	ori	r3,r3,(L1CSR1_CPE|L1CSR1_ICE)@l
+	mtspr	SPRN_L1CSR1,r3
+	isync
+2:
+	mfspr	r3,SPRN_L1CSR1
+	andi.	r1,r3,L1CSR1_ICE@l
+	beq	2b
+
+	/* Enable/invalidate the D-Cache */
+	lis	r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@h
+	ori	r2,r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@l
+	mtspr	SPRN_L1CSR0,r2
+1:
+	mfspr	r3,SPRN_L1CSR0
+	and.	r1,r3,r2
+	bne	1b
+
+	lis	r3,(L1CSR0_CPE|L1CSR0_DCE)@h
+	ori	r3,r3,(L1CSR0_CPE|L1CSR0_DCE)@l
+	mtspr	SPRN_L1CSR0,r3
+	isync
+2:
+	mfspr	r3,SPRN_L1CSR0
+	andi.	r1,r3,L1CSR0_DCE@l
+	beq	2b
 #ifdef CONFIG_SYS_FSL_ERRATUM_A004510
 #define DCSR_LAWBARH0	(CONFIG_SYS_CCSRBAR + 0x1000)
 #define LAW_SIZE_1M	0x13