From: wdenk Date: Sat, 2 Apr 2005 23:52:25 +0000 (+0000) Subject: Prepare for SoC rework of ARM code: X-Git-Tag: LABEL_2006_03_12_0025~337 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=400558b561e2bdb47f87b96b3510dda0881a3662;p=u-boot Prepare for SoC rework of ARM code: - rename CONFIG_BOOTBINFUNC into CONFIG_INIT_CRITICAL - rename memsetup into lowlevel_init (function name and source files) --- diff --git a/CHANGELOG b/CHANGELOG index 5ccee97257..1136f11f7a 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,10 @@ Changes for U-Boot 1.1.3: ====================================================================== +* Prepare for SoC rework of ARM code: + - rename CONFIG_BOOTBINFUNC into CONFIG_INIT_CRITICAL + - rename memsetup into lowlevel_init (function name and source files) + * Fix problems with SNTP support; enable SNTP support in some boards. diff --git a/README b/README index a9c052c059..6cc7405512 100644 --- a/README +++ b/README @@ -2128,6 +2128,15 @@ Low Level (hardware related) configuration options: This only takes effect if the memory commands are activated globally (CFG_CMD_MEM). +- CONFIG_INIT_CRITICAL + [ARM only] If this variable is NOT defined, then + certain critical initializations (like setting up the + memory controller) are omitted. Normally this + variable MUST be defined for all boards. The only + exception is when U-Boot is loaded (to RAM) by some + other boot loader or by a debugger which performs + these intializations itself. + Building the Software: ====================== diff --git a/board/assabet/setup.S b/board/assabet/setup.S index fefb431af2..56ea0dd928 100644 --- a/board/assabet/setup.S +++ b/board/assabet/setup.S @@ -80,8 +80,8 @@ BCR_DB1110: .long ASSABET_BCR_DB1110 LEDS: .long NEPONSET_LEDS - .globl memsetup -memsetup: + .globl lowlevel_init +lowlevel_init: /* Setting up the memory and stuff */ diff --git a/board/cerf250/Makefile b/board/cerf250/Makefile index 3ab97dfdc0..83e3ba458a 100644 --- a/board/cerf250/Makefile +++ b/board/cerf250/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := cerf250.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/cerf250/lowlevel_init.S b/board/cerf250/lowlevel_init.S new file mode 100644 index 0000000000..c9b68d7ff3 --- /dev/null +++ b/board/cerf250/lowlevel_init.S @@ -0,0 +1,411 @@ +/* + * Most of this taken from Redboot hal_platform_setup.h with cleanup + * + * NOTE: I haven't clean this up considerably, just enough to get it + * running. See hal_platform_setup.h for the source. See + * board/cradle/lowlevel_init.S for another PXA250 setup that is + * much cleaner. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +DRAM_SIZE: .long CFG_DRAM_SIZE + +/* wait for coprocessor write complete */ + .macro CPWAIT reg + mrc p15,0,\reg,c2,c0,0 + mov \reg,\reg + sub pc,pc,#4 + .endm + + +/* + * Memory setup + */ + +.globl lowlevel_init +lowlevel_init: + + /* Set up GPIO pins first ----------------------------------------- */ + + ldr r0, =GPSR0 + ldr r1, =CFG_GPSR0_VAL + str r1, [r0] + + ldr r0, =GPSR1 + ldr r1, =CFG_GPSR1_VAL + str r1, [r0] + + ldr r0, =GPSR2 + ldr r1, =CFG_GPSR2_VAL + str r1, [r0] + + ldr r0, =GPCR0 + ldr r1, =CFG_GPCR0_VAL + str r1, [r0] + + ldr r0, =GPCR1 + ldr r1, =CFG_GPCR1_VAL + str r1, [r0] + + ldr r0, =GPCR2 + ldr r1, =CFG_GPCR2_VAL + str r1, [r0] + + ldr r0, =GPDR0 + ldr r1, =CFG_GPDR0_VAL + str r1, [r0] + + ldr r0, =GPDR1 + ldr r1, =CFG_GPDR1_VAL + str r1, [r0] + + ldr r0, =GPDR2 + ldr r1, =CFG_GPDR2_VAL + str r1, [r0] + + ldr r0, =GAFR0_L + ldr r1, =CFG_GAFR0_L_VAL + str r1, [r0] + + ldr r0, =GAFR0_U + ldr r1, =CFG_GAFR0_U_VAL + str r1, [r0] + + ldr r0, =GAFR1_L + ldr r1, =CFG_GAFR1_L_VAL + str r1, [r0] + + ldr r0, =GAFR1_U + ldr r1, =CFG_GAFR1_U_VAL + str r1, [r0] + + ldr r0, =GAFR2_L + ldr r1, =CFG_GAFR2_L_VAL + str r1, [r0] + + ldr r0, =GAFR2_U + ldr r1, =CFG_GAFR2_U_VAL + str r1, [r0] + + ldr r0, =PSSR /* enable GPIO pins */ + ldr r1, =CFG_PSSR_VAL + str r1, [r0] + + /* ---------------------------------------------------------------- */ + /* Enable memory interface */ + /* */ + /* The sequence below is based on the recommended init steps */ + /* detailed in the Intel PXA250 Operating Systems Developers Guide, */ + /* Chapter 10. */ + /* ---------------------------------------------------------------- */ + + /* ---------------------------------------------------------------- */ + /* Step 1: Wait for at least 200 microsedonds to allow internal */ + /* clocks to settle. Only necessary after hard reset... */ + /* FIXME: can be optimized later */ + /* ---------------------------------------------------------------- */ + + ldr r3, =OSCR /* reset the OS Timer Count to zero */ + mov r2, #0 + str r2, [r3] + ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ + /* so 0x300 should be plenty */ +1: + ldr r2, [r3] + cmp r4, r2 + bgt 1b + +mem_init: + + ldr r1, =MEMC_BASE /* get memory controller base addr. */ + + /* ---------------------------------------------------------------- */ + /* Step 2a: Initialize Asynchronous static memory controller */ + /* ---------------------------------------------------------------- */ + + /* MSC registers: timing, bus width, mem type */ + + /* MSC0: nCS(0,1) */ + ldr r2, =CFG_MSC0_VAL + str r2, [r1, #MSC0_OFFSET] + ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */ + /* that data latches */ + /* MSC1: nCS(2,3) */ + ldr r2, =CFG_MSC1_VAL + str r2, [r1, #MSC1_OFFSET] + ldr r2, [r1, #MSC1_OFFSET] + + /* MSC2: nCS(4,5) */ + ldr r2, =CFG_MSC2_VAL + str r2, [r1, #MSC2_OFFSET] + ldr r2, [r1, #MSC2_OFFSET] + + /* ---------------------------------------------------------------- */ + /* Step 2b: Initialize Card Interface */ + /* ---------------------------------------------------------------- */ + + /* MECR: Memory Expansion Card Register */ + ldr r2, =CFG_MECR_VAL + str r2, [r1, #MECR_OFFSET] + ldr r2, [r1, #MECR_OFFSET] + + /* MCMEM0: Card Interface slot 0 timing */ + ldr r2, =CFG_MCMEM0_VAL + str r2, [r1, #MCMEM0_OFFSET] + ldr r2, [r1, #MCMEM0_OFFSET] + + /* MCMEM1: Card Interface slot 1 timing */ + ldr r2, =CFG_MCMEM1_VAL + str r2, [r1, #MCMEM1_OFFSET] + ldr r2, [r1, #MCMEM1_OFFSET] + + /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ + ldr r2, =CFG_MCATT0_VAL + str r2, [r1, #MCATT0_OFFSET] + ldr r2, [r1, #MCATT0_OFFSET] + + /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ + ldr r2, =CFG_MCATT1_VAL + str r2, [r1, #MCATT1_OFFSET] + ldr r2, [r1, #MCATT1_OFFSET] + + /* MCIO0: Card Interface I/O Space Timing, slot 0 */ + ldr r2, =CFG_MCIO0_VAL + str r2, [r1, #MCIO0_OFFSET] + ldr r2, [r1, #MCIO0_OFFSET] + + /* MCIO1: Card Interface I/O Space Timing, slot 1 */ + ldr r2, =CFG_MCIO1_VAL + str r2, [r1, #MCIO1_OFFSET] + ldr r2, [r1, #MCIO1_OFFSET] + + /* ---------------------------------------------------------------- */ + /* Step 2c: Write FLYCNFG FIXME: what's that??? */ + /* ---------------------------------------------------------------- */ + + + /* ---------------------------------------------------------------- */ + /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */ + /* ---------------------------------------------------------------- */ + + /* Before accessing MDREFR we need a valid DRI field, so we set */ + /* this to power on defaults + DRI field, set SDRAM clocks free running */ + + ldr r3, =CFG_MDREFR_VAL + ldr r2, =0xFFF + and r3, r3, r2 + + ldr r0, [r1, #MDREFR_OFFSET] + bic r0, r0, r2 + bic r0, r0, #(MDREFR_K0FREE|MDREFR_K1FREE|MDREFR_K2FREE) + orr r0, r0, r3 + + str r0, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + + + /* ---------------------------------------------------------------- */ + /* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */ + /* ---------------------------------------------------------------- */ + + /* Initialize SXCNFG register. Assert the enable bits */ + + /* Write SXMRS to cause an MRS command to all enabled banks of */ + /* synchronous static memory. Note that SXLCR need not be written */ + /* at this time. */ + + /* FIXME: we use async mode for now */ + + + /* ---------------------------------------------------------------- */ + /* Step 4: Initialize SDRAM */ + /* ---------------------------------------------------------------- */ + + /* set MDREFR according to user define with exception of a few bits */ + + ldr r4, =CFG_MDREFR_VAL + ldr r2, =(MDREFR_K0RUN|MDREFR_K0DB2|MDREFR_K1RUN|MDREFR_K1DB2|\ + MDREFR_K2RUN |MDREFR_K2DB2) + and r4, r4, r2 + bic r0, r0, r2 + orr r0, r0, r4 + + str r0, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r0, [r1, #MDREFR_OFFSET] + + /* Step 4b: de-assert MDREFR:SLFRSH. */ + + bic r0, r0, #(MDREFR_SLFRSH) + str r0, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r0, [r1, #MDREFR_OFFSET] + + + /* Step 4c: assert MDREFR:E1PIN and E0PIO as desired, set KXFREE */ + + ldr r4, =CFG_MDREFR_VAL + ldr r2, =(MDREFR_E0PIN|MDREFR_E1PIN|MDREFR_K0FREE| \ + MDREFR_K1FREE | MDREFR_K2FREE) + and r4, r4, r2 + orr r0, r0, r4 + str r0, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r0, [r1, #MDREFR_OFFSET] + + + /* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */ + /* configure but not enable each SDRAM partition pair. */ + + ldr r4, =CFG_MDCNFG_VAL + bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1) + bic r4, r4, #(MDCNFG_DE2|MDCNFG_DE3) + str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */ + ldr r4, [r1, #MDCNFG_OFFSET] + + + /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */ + /* 100..200 µsec. */ + + ldr r3, =OSCR /* reset the OS Timer Count to zero */ + mov r2, #0 + str r2, [r3] + ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ + /* so 0x300 should be plenty */ +1: + ldr r2, [r3] + cmp r4, r2 + bgt 1b + + + /* Step 4f: Trigger a number (usually 8) refresh cycles by */ + /* attempting non-burst read or write accesses to disabled */ + /* SDRAM, as commonly specified in the power up sequence */ + /* documented in SDRAM data sheets. The address(es) used */ + /* for this purpose must not be cacheable. */ + + ldr r3, =CFG_DRAM_BASE +.rept 8 + str r2, [r3] +.endr + + /* Step 4g: Write MDCNFG with enable bits asserted */ + /* (MDCNFG:DEx set to 1). */ + + ldr r3, [r1, #MDCNFG_OFFSET] + orr r3, r3, #(MDCNFG_DE0|MDCNFG_DE1) + str r3, [r1, #MDCNFG_OFFSET] + + /* Step 4h: Write MDMRS. */ + + ldr r2, =CFG_MDMRS_VAL + str r2, [r1, #MDMRS_OFFSET] + + + /* We are finished with Intel's memory controller initialisation */ + + + /* ---------------------------------------------------------------- */ + /* Disable (mask) all interrupts at interrupt controller */ + /* ---------------------------------------------------------------- */ + +initirqs: + + mov r1, #0 /* clear int. level register (IRQ, not FIQ) */ + ldr r2, =ICLR + str r1, [r2] + + ldr r2, =ICMR /* mask all interrupts at the controller */ + str r1, [r2] + + + /* ---------------------------------------------------------------- */ + /* Clock initialisation */ + /* ---------------------------------------------------------------- */ + +initclks: + + /* Disable the peripheral clocks, and set the core clock frequency */ + + /* Turn Off ALL on-chip peripheral clocks for re-configuration */ + /* Note: See label 'ENABLECLKS' for the re-enabling */ + ldr r1, =CKEN + mov r2, #0 + str r2, [r1] + + + /* default value in case no valid rotary switch setting is found */ + ldr r2, =(CCCR_L27|CCCR_M2|CCCR_N10) /* DEFAULT: {200/200/100} */ + + /* ... and write the core clock config register */ + ldr r1, =CCCR + str r2, [r1] + +#ifdef RTC + /* enable the 32Khz oscillator for RTC and PowerManager */ + + ldr r1, =OSCC + mov r2, #OSCC_OON + str r2, [r1] + + /* NOTE: spin here until OSCC.OOK get set, meaning the PLL */ + /* has settled. */ +60: + ldr r2, [r1] + ands r2, r2, #1 + beq 60b +#endif + + /* ---------------------------------------------------------------- */ + /* */ + /* ---------------------------------------------------------------- */ + + /* Save SDRAM size */ + ldr r1, =DRAM_SIZE + str r8, [r1] + + /* Interrupt init: Mask all interrupts */ + ldr r0, =ICMR /* enable no sources */ + mov r1, #0 + str r1, [r0] + + /* FIXME */ + +#define NODEBUG +#ifdef NODEBUG + /*Disable software and data breakpoints */ + mov r0,#0 + mcr p15,0,r0,c14,c8,0 /* ibcr0 */ + mcr p15,0,r0,c14,c9,0 /* ibcr1 */ + mcr p15,0,r0,c14,c4,0 /* dbcon */ + + /*Enable all debug functionality */ + mov r0,#0x80000000 + mcr p14,0,r0,c10,c0,0 /* dcsr */ + +#endif + + /* ---------------------------------------------------------------- */ + /* End lowlevel_init */ + /* ---------------------------------------------------------------- */ + +endlowlevel_init: + + mov pc, lr diff --git a/board/cerf250/memsetup.S b/board/cerf250/memsetup.S deleted file mode 100644 index f3d373a8a2..0000000000 --- a/board/cerf250/memsetup.S +++ /dev/null @@ -1,411 +0,0 @@ -/* - * Most of this taken from Redboot hal_platform_setup.h with cleanup - * - * NOTE: I haven't clean this up considerably, just enough to get it - * running. See hal_platform_setup.h for the source. See - * board/cradle/memsetup.S for another PXA250 setup that is - * much cleaner. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -DRAM_SIZE: .long CFG_DRAM_SIZE - -/* wait for coprocessor write complete */ - .macro CPWAIT reg - mrc p15,0,\reg,c2,c0,0 - mov \reg,\reg - sub pc,pc,#4 - .endm - - -/* - * Memory setup - */ - -.globl memsetup -memsetup: - - /* Set up GPIO pins first ----------------------------------------- */ - - ldr r0, =GPSR0 - ldr r1, =CFG_GPSR0_VAL - str r1, [r0] - - ldr r0, =GPSR1 - ldr r1, =CFG_GPSR1_VAL - str r1, [r0] - - ldr r0, =GPSR2 - ldr r1, =CFG_GPSR2_VAL - str r1, [r0] - - ldr r0, =GPCR0 - ldr r1, =CFG_GPCR0_VAL - str r1, [r0] - - ldr r0, =GPCR1 - ldr r1, =CFG_GPCR1_VAL - str r1, [r0] - - ldr r0, =GPCR2 - ldr r1, =CFG_GPCR2_VAL - str r1, [r0] - - ldr r0, =GPDR0 - ldr r1, =CFG_GPDR0_VAL - str r1, [r0] - - ldr r0, =GPDR1 - ldr r1, =CFG_GPDR1_VAL - str r1, [r0] - - ldr r0, =GPDR2 - ldr r1, =CFG_GPDR2_VAL - str r1, [r0] - - ldr r0, =GAFR0_L - ldr r1, =CFG_GAFR0_L_VAL - str r1, [r0] - - ldr r0, =GAFR0_U - ldr r1, =CFG_GAFR0_U_VAL - str r1, [r0] - - ldr r0, =GAFR1_L - ldr r1, =CFG_GAFR1_L_VAL - str r1, [r0] - - ldr r0, =GAFR1_U - ldr r1, =CFG_GAFR1_U_VAL - str r1, [r0] - - ldr r0, =GAFR2_L - ldr r1, =CFG_GAFR2_L_VAL - str r1, [r0] - - ldr r0, =GAFR2_U - ldr r1, =CFG_GAFR2_U_VAL - str r1, [r0] - - ldr r0, =PSSR /* enable GPIO pins */ - ldr r1, =CFG_PSSR_VAL - str r1, [r0] - - /* ---------------------------------------------------------------- */ - /* Enable memory interface */ - /* */ - /* The sequence below is based on the recommended init steps */ - /* detailed in the Intel PXA250 Operating Systems Developers Guide, */ - /* Chapter 10. */ - /* ---------------------------------------------------------------- */ - - /* ---------------------------------------------------------------- */ - /* Step 1: Wait for at least 200 microsedonds to allow internal */ - /* clocks to settle. Only necessary after hard reset... */ - /* FIXME: can be optimized later */ - /* ---------------------------------------------------------------- */ - - ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ - /* so 0x300 should be plenty */ -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - -mem_init: - - ldr r1, =MEMC_BASE /* get memory controller base addr. */ - - /* ---------------------------------------------------------------- */ - /* Step 2a: Initialize Asynchronous static memory controller */ - /* ---------------------------------------------------------------- */ - - /* MSC registers: timing, bus width, mem type */ - - /* MSC0: nCS(0,1) */ - ldr r2, =CFG_MSC0_VAL - str r2, [r1, #MSC0_OFFSET] - ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */ - /* that data latches */ - /* MSC1: nCS(2,3) */ - ldr r2, =CFG_MSC1_VAL - str r2, [r1, #MSC1_OFFSET] - ldr r2, [r1, #MSC1_OFFSET] - - /* MSC2: nCS(4,5) */ - ldr r2, =CFG_MSC2_VAL - str r2, [r1, #MSC2_OFFSET] - ldr r2, [r1, #MSC2_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 2b: Initialize Card Interface */ - /* ---------------------------------------------------------------- */ - - /* MECR: Memory Expansion Card Register */ - ldr r2, =CFG_MECR_VAL - str r2, [r1, #MECR_OFFSET] - ldr r2, [r1, #MECR_OFFSET] - - /* MCMEM0: Card Interface slot 0 timing */ - ldr r2, =CFG_MCMEM0_VAL - str r2, [r1, #MCMEM0_OFFSET] - ldr r2, [r1, #MCMEM0_OFFSET] - - /* MCMEM1: Card Interface slot 1 timing */ - ldr r2, =CFG_MCMEM1_VAL - str r2, [r1, #MCMEM1_OFFSET] - ldr r2, [r1, #MCMEM1_OFFSET] - - /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ - ldr r2, =CFG_MCATT0_VAL - str r2, [r1, #MCATT0_OFFSET] - ldr r2, [r1, #MCATT0_OFFSET] - - /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ - ldr r2, =CFG_MCATT1_VAL - str r2, [r1, #MCATT1_OFFSET] - ldr r2, [r1, #MCATT1_OFFSET] - - /* MCIO0: Card Interface I/O Space Timing, slot 0 */ - ldr r2, =CFG_MCIO0_VAL - str r2, [r1, #MCIO0_OFFSET] - ldr r2, [r1, #MCIO0_OFFSET] - - /* MCIO1: Card Interface I/O Space Timing, slot 1 */ - ldr r2, =CFG_MCIO1_VAL - str r2, [r1, #MCIO1_OFFSET] - ldr r2, [r1, #MCIO1_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 2c: Write FLYCNFG FIXME: what's that??? */ - /* ---------------------------------------------------------------- */ - - - /* ---------------------------------------------------------------- */ - /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */ - /* ---------------------------------------------------------------- */ - - /* Before accessing MDREFR we need a valid DRI field, so we set */ - /* this to power on defaults + DRI field, set SDRAM clocks free running */ - - ldr r3, =CFG_MDREFR_VAL - ldr r2, =0xFFF - and r3, r3, r2 - - ldr r0, [r1, #MDREFR_OFFSET] - bic r0, r0, r2 - bic r0, r0, #(MDREFR_K0FREE|MDREFR_K1FREE|MDREFR_K2FREE) - orr r0, r0, r3 - - str r0, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - - - /* ---------------------------------------------------------------- */ - /* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */ - /* ---------------------------------------------------------------- */ - - /* Initialize SXCNFG register. Assert the enable bits */ - - /* Write SXMRS to cause an MRS command to all enabled banks of */ - /* synchronous static memory. Note that SXLCR need not be written */ - /* at this time. */ - - /* FIXME: we use async mode for now */ - - - /* ---------------------------------------------------------------- */ - /* Step 4: Initialize SDRAM */ - /* ---------------------------------------------------------------- */ - - /* set MDREFR according to user define with exception of a few bits */ - - ldr r4, =CFG_MDREFR_VAL - ldr r2, =(MDREFR_K0RUN|MDREFR_K0DB2|MDREFR_K1RUN|MDREFR_K1DB2|\ - MDREFR_K2RUN |MDREFR_K2DB2) - and r4, r4, r2 - bic r0, r0, r2 - orr r0, r0, r4 - - str r0, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r0, [r1, #MDREFR_OFFSET] - - /* Step 4b: de-assert MDREFR:SLFRSH. */ - - bic r0, r0, #(MDREFR_SLFRSH) - str r0, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r0, [r1, #MDREFR_OFFSET] - - - /* Step 4c: assert MDREFR:E1PIN and E0PIO as desired, set KXFREE */ - - ldr r4, =CFG_MDREFR_VAL - ldr r2, =(MDREFR_E0PIN|MDREFR_E1PIN|MDREFR_K0FREE| \ - MDREFR_K1FREE | MDREFR_K2FREE) - and r4, r4, r2 - orr r0, r0, r4 - str r0, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r0, [r1, #MDREFR_OFFSET] - - - /* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */ - /* configure but not enable each SDRAM partition pair. */ - - ldr r4, =CFG_MDCNFG_VAL - bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1) - bic r4, r4, #(MDCNFG_DE2|MDCNFG_DE3) - str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */ - ldr r4, [r1, #MDCNFG_OFFSET] - - - /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */ - /* 100..200 µsec. */ - - ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ - /* so 0x300 should be plenty */ -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - - - /* Step 4f: Trigger a number (usually 8) refresh cycles by */ - /* attempting non-burst read or write accesses to disabled */ - /* SDRAM, as commonly specified in the power up sequence */ - /* documented in SDRAM data sheets. The address(es) used */ - /* for this purpose must not be cacheable. */ - - ldr r3, =CFG_DRAM_BASE -.rept 8 - str r2, [r3] -.endr - - /* Step 4g: Write MDCNFG with enable bits asserted */ - /* (MDCNFG:DEx set to 1). */ - - ldr r3, [r1, #MDCNFG_OFFSET] - orr r3, r3, #(MDCNFG_DE0|MDCNFG_DE1) - str r3, [r1, #MDCNFG_OFFSET] - - /* Step 4h: Write MDMRS. */ - - ldr r2, =CFG_MDMRS_VAL - str r2, [r1, #MDMRS_OFFSET] - - - /* We are finished with Intel's memory controller initialisation */ - - - /* ---------------------------------------------------------------- */ - /* Disable (mask) all interrupts at interrupt controller */ - /* ---------------------------------------------------------------- */ - -initirqs: - - mov r1, #0 /* clear int. level register (IRQ, not FIQ) */ - ldr r2, =ICLR - str r1, [r2] - - ldr r2, =ICMR /* mask all interrupts at the controller */ - str r1, [r2] - - - /* ---------------------------------------------------------------- */ - /* Clock initialisation */ - /* ---------------------------------------------------------------- */ - -initclks: - - /* Disable the peripheral clocks, and set the core clock frequency */ - - /* Turn Off ALL on-chip peripheral clocks for re-configuration */ - /* Note: See label 'ENABLECLKS' for the re-enabling */ - ldr r1, =CKEN - mov r2, #0 - str r2, [r1] - - - /* default value in case no valid rotary switch setting is found */ - ldr r2, =(CCCR_L27|CCCR_M2|CCCR_N10) /* DEFAULT: {200/200/100} */ - - /* ... and write the core clock config register */ - ldr r1, =CCCR - str r2, [r1] - -#ifdef RTC - /* enable the 32Khz oscillator for RTC and PowerManager */ - - ldr r1, =OSCC - mov r2, #OSCC_OON - str r2, [r1] - - /* NOTE: spin here until OSCC.OOK get set, meaning the PLL */ - /* has settled. */ -60: - ldr r2, [r1] - ands r2, r2, #1 - beq 60b -#endif - - /* ---------------------------------------------------------------- */ - /* */ - /* ---------------------------------------------------------------- */ - - /* Save SDRAM size */ - ldr r1, =DRAM_SIZE - str r8, [r1] - - /* Interrupt init: Mask all interrupts */ - ldr r0, =ICMR /* enable no sources */ - mov r1, #0 - str r1, [r0] - - /* FIXME */ - -#define NODEBUG -#ifdef NODEBUG - /*Disable software and data breakpoints */ - mov r0,#0 - mcr p15,0,r0,c14,c8,0 /* ibcr0 */ - mcr p15,0,r0,c14,c9,0 /* ibcr1 */ - mcr p15,0,r0,c14,c4,0 /* dbcon */ - - /*Enable all debug functionality */ - mov r0,#0x80000000 - mcr p14,0,r0,c10,c0,0 /* dcsr */ - -#endif - - /* ---------------------------------------------------------------- */ - /* End memsetup */ - /* ---------------------------------------------------------------- */ - -endmemsetup: - - mov pc, lr diff --git a/board/cradle/Makefile b/board/cradle/Makefile index 5a321eb393..265d50043c 100644 --- a/board/cradle/Makefile +++ b/board/cradle/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := cradle.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/cradle/lowlevel_init.S b/board/cradle/lowlevel_init.S new file mode 100644 index 0000000000..2fd307f1d0 --- /dev/null +++ b/board/cradle/lowlevel_init.S @@ -0,0 +1,515 @@ +/* + * Most of this taken from Redboot hal_platform_setup.h with cleanup + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +DRAM_SIZE: .long CFG_DRAM_SIZE + +/* wait for coprocessor write complete */ + .macro CPWAIT reg + mrc p15,0,\reg,c2,c0,0 + mov \reg,\reg + sub pc,pc,#4 + .endm + + .macro SET_LED val + ldr r6, =CRADLE_LED_CLR_REG + ldr r7, =0 + str r7, [r6] + ldr r6, =CRADLE_LED_SET_REG + ldr r7, =\val + str r7, [r6] + .endm + + +.globl lowlevel_init +lowlevel_init: + + mov r10, lr + + /* Set up GPIO pins first */ + + ldr r0, =GPSR0 + ldr r1, =CFG_GPSR0_VAL + str r1, [r0] + + ldr r0, =GPSR1 + ldr r1, =CFG_GPSR1_VAL + str r1, [r0] + + ldr r0, =GPSR2 + ldr r1, =CFG_GPSR2_VAL + str r1, [r0] + + ldr r0, =GPCR0 + ldr r1, =CFG_GPCR0_VAL + str r1, [r0] + + ldr r0, =GPCR1 + ldr r1, =CFG_GPCR1_VAL + str r1, [r0] + + ldr r0, =GPCR2 + ldr r1, =CFG_GPCR2_VAL + str r1, [r0] + + ldr r0, =GRER0 + ldr r1, =CFG_GRER0_VAL + str r1, [r0] + + ldr r0, =GRER1 + ldr r1, =CFG_GRER1_VAL + str r1, [r0] + + ldr r0, =GRER2 + ldr r1, =CFG_GRER2_VAL + str r1, [r0] + + ldr r0, =GFER0 + ldr r1, =CFG_GFER0_VAL + str r1, [r0] + + ldr r0, =GFER1 + ldr r1, =CFG_GFER1_VAL + str r1, [r0] + + ldr r0, =GFER2 + ldr r1, =CFG_GFER2_VAL + str r1, [r0] + + ldr r0, =GPDR0 + ldr r1, =CFG_GPDR0_VAL + str r1, [r0] + + ldr r0, =GPDR1 + ldr r1, =CFG_GPDR1_VAL + str r1, [r0] + + ldr r0, =GPDR2 + ldr r1, =CFG_GPDR2_VAL + str r1, [r0] + + ldr r0, =GAFR0_L + ldr r1, =CFG_GAFR0_L_VAL + str r1, [r0] + + ldr r0, =GAFR0_U + ldr r1, =CFG_GAFR0_U_VAL + str r1, [r0] + + ldr r0, =GAFR1_L + ldr r1, =CFG_GAFR1_L_VAL + str r1, [r0] + + ldr r0, =GAFR1_U + ldr r1, =CFG_GAFR1_U_VAL + str r1, [r0] + + ldr r0, =GAFR2_L + ldr r1, =CFG_GAFR2_L_VAL + str r1, [r0] + + ldr r0, =GAFR2_U + ldr r1, =CFG_GAFR2_U_VAL + str r1, [r0] + + /* enable GPIO pins */ + ldr r0, =PSSR + ldr r1, =CFG_PSSR_VAL + str r1, [r0] + + SET_LED 1 + + ldr r3, =MSC1 /* low - bank 2 Lubbock Registers / SRAM */ + ldr r2, =CFG_MSC1_VAL /* high - bank 3 Ethernet Controller */ + str r2, [r3] /* need to set MSC1 before trying to write to the HEX LEDs */ + ldr r2, [r3] /* need to read it back to make sure the value latches (see MSC section of manual) */ + + +/********************************************************************* + Initlialize Memory Controller + + See PXA250 Operating System Developer's Guide + + pause for 200 uSecs- allow internal clocks to settle + *Note: only need this if hard reset... doing it anyway for now +*/ + + @ Step 1 + @ ---- Wait 200 usec + ldr r3, =OSCR @ reset the OS Timer Count to zero + mov r2, #0 + str r2, [r3] + ldr r4, =0x300 @ really 0x2E1 is about 200usec, so 0x300 should be plenty +1: + ldr r2, [r3] + cmp r4, r2 + bgt 1b + + SET_LED 2 + +mem_init: + @ get memory controller base address + ldr r1, =MEMC_BASE + + +@**************************************************************************** +@ Step 2 +@ + + @ Step 2a + @ write msc0, read back to ensure data latches + @ + ldr r2, =CFG_MSC0_VAL + str r2, [r1, #MSC0_OFFSET] + ldr r2, [r1, #MSC0_OFFSET] + + @ write msc1 + ldr r2, =CFG_MSC1_VAL + str r2, [r1, #MSC1_OFFSET] + ldr r2, [r1, #MSC1_OFFSET] + + @ write msc2 + ldr r2, =CFG_MSC2_VAL + str r2, [r1, #MSC2_OFFSET] + ldr r2, [r1, #MSC2_OFFSET] + + @ Step 2b + @ write mecr + ldr r2, =CFG_MECR_VAL + str r2, [r1, #MECR_OFFSET] + + @ write mcmem0 + ldr r2, =CFG_MCMEM0_VAL + str r2, [r1, #MCMEM0_OFFSET] + + @ write mcmem1 + ldr r2, =CFG_MCMEM1_VAL + str r2, [r1, #MCMEM1_OFFSET] + + @ write mcatt0 + ldr r2, =CFG_MCATT0_VAL + str r2, [r1, #MCATT0_OFFSET] + + @ write mcatt1 + ldr r2, =CFG_MCATT1_VAL + str r2, [r1, #MCATT1_OFFSET] + + @ write mcio0 + ldr r2, =CFG_MCIO0_VAL + str r2, [r1, #MCIO0_OFFSET] + + @ write mcio1 + ldr r2, =CFG_MCIO1_VAL + str r2, [r1, #MCIO1_OFFSET] + + /*SET_LED 3 */ + + @ Step 2c + @ fly-by-dma is defeatured on this part + @ write flycnfg + @ldr r2, =CFG_FLYCNFG_VAL + @str r2, [r1, #FLYCNFG_OFFSET] + +/* FIXME Does this sequence really make sense */ +#ifdef REDBOOT_WAY + @ Step 2d + @ get the mdrefr settings + ldr r3, =CFG_MDREFR_VAL + + @ extract DRI field (we need a valid DRI field) + @ + ldr r2, =0xFFF + + @ valid DRI field in r3 + @ + and r3, r3, r2 + + @ get the reset state of MDREFR + @ + ldr r4, [r1, #MDREFR_OFFSET] + + @ clear the DRI field + @ + bic r4, r4, r2 + + @ insert the valid DRI field loaded above + @ + orr r4, r4, r3 + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + + @ *Note: preserve the mdrefr value in r4 * + + /*SET_LED 4 */ + +@**************************************************************************** +@ Step 3 +@ +@ NO SRAM + + mov pc, r10 + + +@**************************************************************************** +@ Step 4 +@ + + @ Assumes previous mdrefr value in r4, if not then read current mdrefr + + @ clear the free-running clock bits + @ (clear K0Free, K1Free, K2Free + @ + bic r4, r4, #(0x00800000 | 0x01000000 | 0x02000000) + + @ set K0RUN for CPLD clock + @ + orr r4, r4, #0x00002000 + + @ set K1RUN if bank 0 installed + @ + orr r4, r4, #0x00010000 + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + ldr r4, [r1, #MDREFR_OFFSET] + + @ deassert SLFRSH + @ + bic r4, r4, #0x00400000 + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + + @ assert E1PIN + @ + orr r4, r4, #0x00008000 + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + ldr r4, [r1, #MDREFR_OFFSET] + nop + nop +#else + @ Step 2d + @ get the mdrefr settings + ldr r3, =CFG_MDREFR_VAL + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + + @ Step 4 + + @ set K0RUN for CPLD clock + @ + orr r4, r4, #0x00002000 + + @ set K1RUN for bank 0 + @ + orr r4, r4, #0x00010000 + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + ldr r4, [r1, #MDREFR_OFFSET] + + @ deassert SLFRSH + @ + bic r4, r4, #0x00400000 + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + + @ assert E1PIN + @ + orr r4, r4, #0x00008000 + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + ldr r4, [r1, #MDREFR_OFFSET] + nop + nop +#endif + + @ Step 4d + @ fetch platform value of mdcnfg + @ + ldr r2, =CFG_MDCNFG_VAL + + @ disable all sdram banks + @ + bic r2, r2, #(MDCNFG_DE0 | MDCNFG_DE1) + bic r2, r2, #(MDCNFG_DE2 | MDCNFG_DE3) + + @ program banks 0/1 for bus width + @ + bic r2, r2, #MDCNFG_DWID0 @0=32-bit + + @ write initial value of mdcnfg, w/o enabling sdram banks + @ + str r2, [r1, #MDCNFG_OFFSET] + + @ Step 4e + @ pause for 200 uSecs + @ + ldr r3, =OSCR @ reset the OS Timer Count to zero + mov r2, #0 + str r2, [r3] + ldr r4, =0x300 @ really 0x2E1 is about 200usec, so 0x300 should be plenty +1: + ldr r2, [r3] + cmp r4, r2 + bgt 1b + + /*SET_LED 5 */ + + /* Why is this here??? */ + mov r0, #0x78 @turn everything off + mcr p15, 0, r0, c1, c0, 0 @(caches off, MMU off, etc.) + + @ Step 4f + @ Access memory *not yet enabled* for CBR refresh cycles (8) + @ - CBR is generated for all banks + + ldr r2, =CFG_DRAM_BASE + str r2, [r2] + str r2, [r2] + str r2, [r2] + str r2, [r2] + str r2, [r2] + str r2, [r2] + str r2, [r2] + str r2, [r2] + + @ Step 4g + @get memory controller base address + @ + ldr r1, =MEMC_BASE + + @fetch current mdcnfg value + @ + ldr r3, [r1, #MDCNFG_OFFSET] + + @enable sdram bank 0 if installed (must do for any populated bank) + @ + orr r3, r3, #MDCNFG_DE0 + + @write back mdcnfg, enabling the sdram bank(s) + @ + str r3, [r1, #MDCNFG_OFFSET] + + @ Step 4h + @ write mdmrs + @ + ldr r2, =CFG_MDMRS_VAL + str r2, [r1, #MDMRS_OFFSET] + + @ Done Memory Init + + /*SET_LED 6 */ + + @******************************************************************** + @ Disable (mask) all interrupts at the interrupt controller + @ + + @ clear the interrupt level register (use IRQ, not FIQ) + @ + mov r1, #0 + ldr r2, =ICLR + str r1, [r2] + + @ Set interrupt mask register + @ + ldr r1, =CFG_ICMR_VAL + ldr r2, =ICMR + str r1, [r2] + + @ ******************************************************************** + @ Disable the peripheral clocks, and set the core clock + @ + + @ Turn Off ALL on-chip peripheral clocks for re-configuration + @ + ldr r1, =CKEN + mov r2, #0 + str r2, [r1] + + @ set core clocks + @ + ldr r2, =CFG_CCCR_VAL + ldr r1, =CCCR + str r2, [r1] + +#ifdef ENABLE32KHZ + @ enable the 32Khz oscillator for RTC and PowerManager + @ + ldr r1, =OSCC + mov r2, #OSCC_OON + str r2, [r1] + + @ NOTE: spin here until OSCC.OOK get set, + @ meaning the PLL has settled. + @ +60: + ldr r2, [r1] + ands r2, r2, #1 + beq 60b +#endif + + @ Turn on needed clocks + @ + ldr r1, =CKEN + ldr r2, =CFG_CKEN_VAL + str r2, [r1] + + /*SET_LED 7 */ + +/* Is this needed???? */ +#define NODEBUG +#ifdef NODEBUG + /*Disable software and data breakpoints */ + mov r0,#0 + mcr p15,0,r0,c14,c8,0 /* ibcr0 */ + mcr p15,0,r0,c14,c9,0 /* ibcr1 */ + mcr p15,0,r0,c14,c4,0 /* dbcon */ + + /*Enable all debug functionality */ + mov r0,#0x80000000 + mcr p14,0,r0,c10,c0,0 /* dcsr */ + +#endif + + /*SET_LED 8 */ + + mov pc, r10 + +@ End lowlevel_init diff --git a/board/cradle/memsetup.S b/board/cradle/memsetup.S deleted file mode 100644 index 8800cb0cb7..0000000000 --- a/board/cradle/memsetup.S +++ /dev/null @@ -1,515 +0,0 @@ -/* - * Most of this taken from Redboot hal_platform_setup.h with cleanup - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -DRAM_SIZE: .long CFG_DRAM_SIZE - -/* wait for coprocessor write complete */ - .macro CPWAIT reg - mrc p15,0,\reg,c2,c0,0 - mov \reg,\reg - sub pc,pc,#4 - .endm - - .macro SET_LED val - ldr r6, =CRADLE_LED_CLR_REG - ldr r7, =0 - str r7, [r6] - ldr r6, =CRADLE_LED_SET_REG - ldr r7, =\val - str r7, [r6] - .endm - - -.globl memsetup -memsetup: - - mov r10, lr - - /* Set up GPIO pins first */ - - ldr r0, =GPSR0 - ldr r1, =CFG_GPSR0_VAL - str r1, [r0] - - ldr r0, =GPSR1 - ldr r1, =CFG_GPSR1_VAL - str r1, [r0] - - ldr r0, =GPSR2 - ldr r1, =CFG_GPSR2_VAL - str r1, [r0] - - ldr r0, =GPCR0 - ldr r1, =CFG_GPCR0_VAL - str r1, [r0] - - ldr r0, =GPCR1 - ldr r1, =CFG_GPCR1_VAL - str r1, [r0] - - ldr r0, =GPCR2 - ldr r1, =CFG_GPCR2_VAL - str r1, [r0] - - ldr r0, =GRER0 - ldr r1, =CFG_GRER0_VAL - str r1, [r0] - - ldr r0, =GRER1 - ldr r1, =CFG_GRER1_VAL - str r1, [r0] - - ldr r0, =GRER2 - ldr r1, =CFG_GRER2_VAL - str r1, [r0] - - ldr r0, =GFER0 - ldr r1, =CFG_GFER0_VAL - str r1, [r0] - - ldr r0, =GFER1 - ldr r1, =CFG_GFER1_VAL - str r1, [r0] - - ldr r0, =GFER2 - ldr r1, =CFG_GFER2_VAL - str r1, [r0] - - ldr r0, =GPDR0 - ldr r1, =CFG_GPDR0_VAL - str r1, [r0] - - ldr r0, =GPDR1 - ldr r1, =CFG_GPDR1_VAL - str r1, [r0] - - ldr r0, =GPDR2 - ldr r1, =CFG_GPDR2_VAL - str r1, [r0] - - ldr r0, =GAFR0_L - ldr r1, =CFG_GAFR0_L_VAL - str r1, [r0] - - ldr r0, =GAFR0_U - ldr r1, =CFG_GAFR0_U_VAL - str r1, [r0] - - ldr r0, =GAFR1_L - ldr r1, =CFG_GAFR1_L_VAL - str r1, [r0] - - ldr r0, =GAFR1_U - ldr r1, =CFG_GAFR1_U_VAL - str r1, [r0] - - ldr r0, =GAFR2_L - ldr r1, =CFG_GAFR2_L_VAL - str r1, [r0] - - ldr r0, =GAFR2_U - ldr r1, =CFG_GAFR2_U_VAL - str r1, [r0] - - /* enable GPIO pins */ - ldr r0, =PSSR - ldr r1, =CFG_PSSR_VAL - str r1, [r0] - - SET_LED 1 - - ldr r3, =MSC1 /* low - bank 2 Lubbock Registers / SRAM */ - ldr r2, =CFG_MSC1_VAL /* high - bank 3 Ethernet Controller */ - str r2, [r3] /* need to set MSC1 before trying to write to the HEX LEDs */ - ldr r2, [r3] /* need to read it back to make sure the value latches (see MSC section of manual) */ - - -/********************************************************************* - Initlialize Memory Controller - - See PXA250 Operating System Developer's Guide - - pause for 200 uSecs- allow internal clocks to settle - *Note: only need this if hard reset... doing it anyway for now -*/ - - @ Step 1 - @ ---- Wait 200 usec - ldr r3, =OSCR @ reset the OS Timer Count to zero - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 @ really 0x2E1 is about 200usec, so 0x300 should be plenty -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - - SET_LED 2 - -mem_init: - @ get memory controller base address - ldr r1, =MEMC_BASE - - -@**************************************************************************** -@ Step 2 -@ - - @ Step 2a - @ write msc0, read back to ensure data latches - @ - ldr r2, =CFG_MSC0_VAL - str r2, [r1, #MSC0_OFFSET] - ldr r2, [r1, #MSC0_OFFSET] - - @ write msc1 - ldr r2, =CFG_MSC1_VAL - str r2, [r1, #MSC1_OFFSET] - ldr r2, [r1, #MSC1_OFFSET] - - @ write msc2 - ldr r2, =CFG_MSC2_VAL - str r2, [r1, #MSC2_OFFSET] - ldr r2, [r1, #MSC2_OFFSET] - - @ Step 2b - @ write mecr - ldr r2, =CFG_MECR_VAL - str r2, [r1, #MECR_OFFSET] - - @ write mcmem0 - ldr r2, =CFG_MCMEM0_VAL - str r2, [r1, #MCMEM0_OFFSET] - - @ write mcmem1 - ldr r2, =CFG_MCMEM1_VAL - str r2, [r1, #MCMEM1_OFFSET] - - @ write mcatt0 - ldr r2, =CFG_MCATT0_VAL - str r2, [r1, #MCATT0_OFFSET] - - @ write mcatt1 - ldr r2, =CFG_MCATT1_VAL - str r2, [r1, #MCATT1_OFFSET] - - @ write mcio0 - ldr r2, =CFG_MCIO0_VAL - str r2, [r1, #MCIO0_OFFSET] - - @ write mcio1 - ldr r2, =CFG_MCIO1_VAL - str r2, [r1, #MCIO1_OFFSET] - - /*SET_LED 3 */ - - @ Step 2c - @ fly-by-dma is defeatured on this part - @ write flycnfg - @ldr r2, =CFG_FLYCNFG_VAL - @str r2, [r1, #FLYCNFG_OFFSET] - -/* FIXME Does this sequence really make sense */ -#ifdef REDBOOT_WAY - @ Step 2d - @ get the mdrefr settings - ldr r3, =CFG_MDREFR_VAL - - @ extract DRI field (we need a valid DRI field) - @ - ldr r2, =0xFFF - - @ valid DRI field in r3 - @ - and r3, r3, r2 - - @ get the reset state of MDREFR - @ - ldr r4, [r1, #MDREFR_OFFSET] - - @ clear the DRI field - @ - bic r4, r4, r2 - - @ insert the valid DRI field loaded above - @ - orr r4, r4, r3 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - - @ *Note: preserve the mdrefr value in r4 * - - /*SET_LED 4 */ - -@**************************************************************************** -@ Step 3 -@ -@ NO SRAM - - mov pc, r10 - - -@**************************************************************************** -@ Step 4 -@ - - @ Assumes previous mdrefr value in r4, if not then read current mdrefr - - @ clear the free-running clock bits - @ (clear K0Free, K1Free, K2Free - @ - bic r4, r4, #(0x00800000 | 0x01000000 | 0x02000000) - - @ set K0RUN for CPLD clock - @ - orr r4, r4, #0x00002000 - - @ set K1RUN if bank 0 installed - @ - orr r4, r4, #0x00010000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - - @ deassert SLFRSH - @ - bic r4, r4, #0x00400000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - - @ assert E1PIN - @ - orr r4, r4, #0x00008000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - nop - nop -#else - @ Step 2d - @ get the mdrefr settings - ldr r3, =CFG_MDREFR_VAL - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - - @ Step 4 - - @ set K0RUN for CPLD clock - @ - orr r4, r4, #0x00002000 - - @ set K1RUN for bank 0 - @ - orr r4, r4, #0x00010000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - - @ deassert SLFRSH - @ - bic r4, r4, #0x00400000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - - @ assert E1PIN - @ - orr r4, r4, #0x00008000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - nop - nop -#endif - - @ Step 4d - @ fetch platform value of mdcnfg - @ - ldr r2, =CFG_MDCNFG_VAL - - @ disable all sdram banks - @ - bic r2, r2, #(MDCNFG_DE0 | MDCNFG_DE1) - bic r2, r2, #(MDCNFG_DE2 | MDCNFG_DE3) - - @ program banks 0/1 for bus width - @ - bic r2, r2, #MDCNFG_DWID0 @0=32-bit - - @ write initial value of mdcnfg, w/o enabling sdram banks - @ - str r2, [r1, #MDCNFG_OFFSET] - - @ Step 4e - @ pause for 200 uSecs - @ - ldr r3, =OSCR @ reset the OS Timer Count to zero - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 @ really 0x2E1 is about 200usec, so 0x300 should be plenty -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - - /*SET_LED 5 */ - - /* Why is this here??? */ - mov r0, #0x78 @turn everything off - mcr p15, 0, r0, c1, c0, 0 @(caches off, MMU off, etc.) - - @ Step 4f - @ Access memory *not yet enabled* for CBR refresh cycles (8) - @ - CBR is generated for all banks - - ldr r2, =CFG_DRAM_BASE - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - - @ Step 4g - @get memory controller base address - @ - ldr r1, =MEMC_BASE - - @fetch current mdcnfg value - @ - ldr r3, [r1, #MDCNFG_OFFSET] - - @enable sdram bank 0 if installed (must do for any populated bank) - @ - orr r3, r3, #MDCNFG_DE0 - - @write back mdcnfg, enabling the sdram bank(s) - @ - str r3, [r1, #MDCNFG_OFFSET] - - @ Step 4h - @ write mdmrs - @ - ldr r2, =CFG_MDMRS_VAL - str r2, [r1, #MDMRS_OFFSET] - - @ Done Memory Init - - /*SET_LED 6 */ - - @******************************************************************** - @ Disable (mask) all interrupts at the interrupt controller - @ - - @ clear the interrupt level register (use IRQ, not FIQ) - @ - mov r1, #0 - ldr r2, =ICLR - str r1, [r2] - - @ Set interrupt mask register - @ - ldr r1, =CFG_ICMR_VAL - ldr r2, =ICMR - str r1, [r2] - - @ ******************************************************************** - @ Disable the peripheral clocks, and set the core clock - @ - - @ Turn Off ALL on-chip peripheral clocks for re-configuration - @ - ldr r1, =CKEN - mov r2, #0 - str r2, [r1] - - @ set core clocks - @ - ldr r2, =CFG_CCCR_VAL - ldr r1, =CCCR - str r2, [r1] - -#ifdef ENABLE32KHZ - @ enable the 32Khz oscillator for RTC and PowerManager - @ - ldr r1, =OSCC - mov r2, #OSCC_OON - str r2, [r1] - - @ NOTE: spin here until OSCC.OOK get set, - @ meaning the PLL has settled. - @ -60: - ldr r2, [r1] - ands r2, r2, #1 - beq 60b -#endif - - @ Turn on needed clocks - @ - ldr r1, =CKEN - ldr r2, =CFG_CKEN_VAL - str r2, [r1] - - /*SET_LED 7 */ - -/* Is this needed???? */ -#define NODEBUG -#ifdef NODEBUG - /*Disable software and data breakpoints */ - mov r0,#0 - mcr p15,0,r0,c14,c8,0 /* ibcr0 */ - mcr p15,0,r0,c14,c9,0 /* ibcr1 */ - mcr p15,0,r0,c14,c4,0 /* dbcon */ - - /*Enable all debug functionality */ - mov r0,#0x80000000 - mcr p14,0,r0,c10,c0,0 /* dcsr */ - -#endif - - /*SET_LED 8 */ - - mov pc, r10 - -@ End memsetup diff --git a/board/csb226/Makefile b/board/csb226/Makefile index ac94642453..5b311a9450 100644 --- a/board/csb226/Makefile +++ b/board/csb226/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := csb226.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/csb226/lowlevel_init.S b/board/csb226/lowlevel_init.S new file mode 100644 index 0000000000..aa9dcba6fc --- /dev/null +++ b/board/csb226/lowlevel_init.S @@ -0,0 +1,437 @@ +/* + * Most of this taken from Redboot hal_platform_setup.h with cleanup + * + * NOTE: I haven't clean this up considerably, just enough to get it + * running. See hal_platform_setup.h for the source. See + * board/cradle/lowlevel_init.S for another PXA250 setup that is + * much cleaner. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +DRAM_SIZE: .long CFG_DRAM_SIZE + +/* wait for coprocessor write complete */ + .macro CPWAIT reg + mrc p15,0,\reg,c2,c0,0 + mov \reg,\reg + sub pc,pc,#4 + .endm + +_TEXT_BASE: + .word TEXT_BASE + + +/* + * Memory setup + */ + +.globl lowlevel_init +lowlevel_init: + + mov r10, lr + + /* Set up GPIO pins first ----------------------------------------- */ + + ldr r0, =GPSR0 + ldr r1, =CFG_GPSR0_VAL + str r1, [r0] + + ldr r0, =GPSR1 + ldr r1, =CFG_GPSR1_VAL + str r1, [r0] + + ldr r0, =GPSR2 + ldr r1, =CFG_GPSR2_VAL + str r1, [r0] + + ldr r0, =GPCR0 + ldr r1, =CFG_GPCR0_VAL + str r1, [r0] + + ldr r0, =GPCR1 + ldr r1, =CFG_GPCR1_VAL + str r1, [r0] + + ldr r0, =GPCR2 + ldr r1, =CFG_GPCR2_VAL + str r1, [r0] + + ldr r0, =GPDR0 + ldr r1, =CFG_GPDR0_VAL + str r1, [r0] + + ldr r0, =GPDR1 + ldr r1, =CFG_GPDR1_VAL + str r1, [r0] + + ldr r0, =GPDR2 + ldr r1, =CFG_GPDR2_VAL + str r1, [r0] + + ldr r0, =GAFR0_L + ldr r1, =CFG_GAFR0_L_VAL + str r1, [r0] + + ldr r0, =GAFR0_U + ldr r1, =CFG_GAFR0_U_VAL + str r1, [r0] + + ldr r0, =GAFR1_L + ldr r1, =CFG_GAFR1_L_VAL + str r1, [r0] + + ldr r0, =GAFR1_U + ldr r1, =CFG_GAFR1_U_VAL + str r1, [r0] + + ldr r0, =GAFR2_L + ldr r1, =CFG_GAFR2_L_VAL + str r1, [r0] + + ldr r0, =GAFR2_U + ldr r1, =CFG_GAFR2_U_VAL + str r1, [r0] + + ldr r0, =PSSR /* enable GPIO pins */ + ldr r1, =CFG_PSSR_VAL + str r1, [r0] + +/* ldr r3, =MSC1 / low - bank 2 Lubbock Registers / SRAM */ +/* ldr r2, =CFG_MSC1_VAL / high - bank 3 Ethernet Controller */ +/* str r2, [r3] / need to set MSC1 before trying to write to the HEX LEDs */ +/* ldr r2, [r3] / need to read it back to make sure the value latches (see MSC section of manual) */ +/* */ +/* ldr r1, =LED_BLANK */ +/* mov r0, #0xFF */ +/* str r0, [r1] / turn on hex leds */ +/* */ +/*loop: */ +/* */ +/* ldr r0, =0xB0070001 */ +/* ldr r1, =_LED */ +/* str r0, [r1] / hex display */ + + + /* ---------------------------------------------------------------- */ + /* Enable memory interface */ + /* */ + /* The sequence below is based on the recommended init steps */ + /* detailed in the Intel PXA250 Operating Systems Developers Guide, */ + /* Chapter 10. */ + /* ---------------------------------------------------------------- */ + + /* ---------------------------------------------------------------- */ + /* Step 1: Wait for at least 200 microsedonds to allow internal */ + /* clocks to settle. Only necessary after hard reset... */ + /* FIXME: can be optimized later */ + /* ---------------------------------------------------------------- */ + + ldr r3, =OSCR /* reset the OS Timer Count to zero */ + mov r2, #0 + str r2, [r3] + ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ + /* so 0x300 should be plenty */ +1: + ldr r2, [r3] + cmp r4, r2 + bgt 1b + +mem_init: + + ldr r1, =MEMC_BASE /* get memory controller base addr. */ + + /* ---------------------------------------------------------------- */ + /* Step 2a: Initialize Asynchronous static memory controller */ + /* ---------------------------------------------------------------- */ + + /* MSC registers: timing, bus width, mem type */ + + /* MSC0: nCS(0,1) */ + ldr r2, =CFG_MSC0_VAL + str r2, [r1, #MSC0_OFFSET] + ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */ + /* that data latches */ + /* MSC1: nCS(2,3) */ + ldr r2, =CFG_MSC1_VAL + str r2, [r1, #MSC1_OFFSET] + ldr r2, [r1, #MSC1_OFFSET] + + /* MSC2: nCS(4,5) */ + ldr r2, =CFG_MSC2_VAL + str r2, [r1, #MSC2_OFFSET] + ldr r2, [r1, #MSC2_OFFSET] + + /* ---------------------------------------------------------------- */ + /* Step 2b: Initialize Card Interface */ + /* ---------------------------------------------------------------- */ + + /* MECR: Memory Expansion Card Register */ + ldr r2, =CFG_MECR_VAL + str r2, [r1, #MECR_OFFSET] + ldr r2, [r1, #MECR_OFFSET] + + /* MCMEM0: Card Interface slot 0 timing */ + ldr r2, =CFG_MCMEM0_VAL + str r2, [r1, #MCMEM0_OFFSET] + ldr r2, [r1, #MCMEM0_OFFSET] + + /* MCMEM1: Card Interface slot 1 timing */ + ldr r2, =CFG_MCMEM1_VAL + str r2, [r1, #MCMEM1_OFFSET] + ldr r2, [r1, #MCMEM1_OFFSET] + + /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ + ldr r2, =CFG_MCATT0_VAL + str r2, [r1, #MCATT0_OFFSET] + ldr r2, [r1, #MCATT0_OFFSET] + + /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ + ldr r2, =CFG_MCATT1_VAL + str r2, [r1, #MCATT1_OFFSET] + ldr r2, [r1, #MCATT1_OFFSET] + + /* MCIO0: Card Interface I/O Space Timing, slot 0 */ + ldr r2, =CFG_MCIO0_VAL + str r2, [r1, #MCIO0_OFFSET] + ldr r2, [r1, #MCIO0_OFFSET] + + /* MCIO1: Card Interface I/O Space Timing, slot 1 */ + ldr r2, =CFG_MCIO1_VAL + str r2, [r1, #MCIO1_OFFSET] + ldr r2, [r1, #MCIO1_OFFSET] + + /* ---------------------------------------------------------------- */ + /* Step 2c: Write FLYCNFG FIXME: what's that??? */ + /* ---------------------------------------------------------------- */ + + /* test if we run from flash or RAM - RAM/BDI: don't setup RAM */ + adr r3, mem_init /* r0 <- current position of code */ + ldr r2, =mem_init + cmp r3, r2 /* skip init if in place */ + beq initirqs + + + /* ---------------------------------------------------------------- */ + /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */ + /* ---------------------------------------------------------------- */ + + /* Before accessing MDREFR we need a valid DRI field, so we set */ + /* this to power on defaults + DRI field. */ + + ldr r3, =CFG_MDREFR_VAL + ldr r2, =0xFFF + and r3, r3, r2 + ldr r4, =0x03ca4000 + orr r4, r4, r3 + + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r4, [r1, #MDREFR_OFFSET] + + + /* ---------------------------------------------------------------- */ + /* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */ + /* ---------------------------------------------------------------- */ + + /* Initialize SXCNFG register. Assert the enable bits */ + + /* Write SXMRS to cause an MRS command to all enabled banks of */ + /* synchronous static memory. Note that SXLCR need not be written */ + /* at this time. */ + + /* FIXME: we use async mode for now */ + + + /* ---------------------------------------------------------------- */ + /* Step 4: Initialize SDRAM */ + /* ---------------------------------------------------------------- */ + + /* Step 4a: assert MDREFR:K?RUN and configure */ + /* MDREFR:K1DB2 and MDREFR:K2DB2 as desired. */ + + ldr r4, =CFG_MDREFR_VAL + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r4, [r1, #MDREFR_OFFSET] + + /* Step 4b: de-assert MDREFR:SLFRSH. */ + + bic r4, r4, #(MDREFR_SLFRSH) + + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r4, [r1, #MDREFR_OFFSET] + + + /* Step 4c: assert MDREFR:E1PIN and E0PIO */ + + orr r4, r4, #(MDREFR_E1PIN|MDREFR_E0PIN) + + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r4, [r1, #MDREFR_OFFSET] + + + /* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */ + /* configure but not enable each SDRAM partition pair. */ + + ldr r4, =CFG_MDCNFG_VAL + bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1) + + str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */ + ldr r4, [r1, #MDCNFG_OFFSET] + + + /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */ + /* 100..200 µsec. */ + + ldr r3, =OSCR /* reset the OS Timer Count to zero */ + mov r2, #0 + str r2, [r3] + ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ + /* so 0x300 should be plenty */ +1: + ldr r2, [r3] + cmp r4, r2 + bgt 1b + + + /* Step 4f: Trigger a number (usually 8) refresh cycles by */ + /* attempting non-burst read or write accesses to disabled */ + /* SDRAM, as commonly specified in the power up sequence */ + /* documented in SDRAM data sheets. The address(es) used */ + /* for this purpose must not be cacheable. */ + + /* There should 9 writes, since the first write doesn't */ + /* trigger a refresh cycle on PXA250. See Intel PXA250 and */ + /* PXA210 Processors Specification Update, */ + /* Jan 2003, Errata #116, page 30. */ + + + ldr r3, =CFG_DRAM_BASE + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + + /* Step 4g: Write MDCNFG with enable bits asserted */ + /* (MDCNFG:DEx set to 1). */ + + ldr r3, [r1, #MDCNFG_OFFSET] + orr r3, r3, #(MDCNFG_DE0|MDCNFG_DE1) + str r3, [r1, #MDCNFG_OFFSET] + + /* Step 4h: Write MDMRS. */ + + ldr r2, =CFG_MDMRS_VAL + str r2, [r1, #MDMRS_OFFSET] + + + /* We are finished with Intel's memory controller initialisation */ + + /* ---------------------------------------------------------------- */ + /* Disable (mask) all interrupts at interrupt controller */ + /* ---------------------------------------------------------------- */ + +initirqs: + + mov r1, #0 /* clear int. level register (IRQ, not FIQ) */ + ldr r2, =ICLR + str r1, [r2] + + ldr r2, =ICMR /* mask all interrupts at the controller */ + str r1, [r2] + + + /* ---------------------------------------------------------------- */ + /* Clock initialisation */ + /* ---------------------------------------------------------------- */ + +initclks: + + /* Disable the peripheral clocks, and set the core clock frequency */ + /* (hard-coding at 398.12MHz for now). */ + + /* Turn Off ALL on-chip peripheral clocks for re-configuration */ + /* Note: See label 'ENABLECLKS' for the re-enabling */ + ldr r1, =CKEN + mov r2, #0 + str r2, [r1] + + + /* default value in case no valid rotary switch setting is found */ + ldr r2, =(CCCR_L27|CCCR_M2|CCCR_N10) /* DEFAULT: {200/200/100} */ + + /* ... and write the core clock config register */ + ldr r1, =CCCR + str r2, [r1] + + /* enable the 32Khz oscillator for RTC and PowerManager */ +/* + ldr r1, =OSCC + mov r2, #OSCC_OON + str r2, [r1] +*/ + /* NOTE: spin here until OSCC.OOK get set, meaning the PLL */ + /* has settled. */ +60: + ldr r2, [r1] + ands r2, r2, #1 + beq 60b + + /* ---------------------------------------------------------------- */ + /* */ + /* ---------------------------------------------------------------- */ + + /* Save SDRAM size */ + ldr r1, =DRAM_SIZE + str r8, [r1] + + /* Interrupt init: Mask all interrupts */ + ldr r0, =ICMR /* enable no sources */ + mov r1, #0 + str r1, [r0] + + /* FIXME */ + +#ifndef DEBUG + /*Disable software and data breakpoints */ + mov r0,#0 + mcr p15,0,r0,c14,c8,0 /* ibcr0 */ + mcr p15,0,r0,c14,c9,0 /* ibcr1 */ + mcr p15,0,r0,c14,c4,0 /* dbcon */ + + /*Enable all debug functionality */ + mov r0,#0x80000000 + mcr p14,0,r0,c10,c0,0 /* dcsr */ +#endif + + /* ---------------------------------------------------------------- */ + /* End lowlevel_init */ + /* ---------------------------------------------------------------- */ + +endlowlevel_init: + + mov pc, lr diff --git a/board/csb226/memsetup.S b/board/csb226/memsetup.S deleted file mode 100644 index 68577ca069..0000000000 --- a/board/csb226/memsetup.S +++ /dev/null @@ -1,437 +0,0 @@ -/* - * Most of this taken from Redboot hal_platform_setup.h with cleanup - * - * NOTE: I haven't clean this up considerably, just enough to get it - * running. See hal_platform_setup.h for the source. See - * board/cradle/memsetup.S for another PXA250 setup that is - * much cleaner. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -DRAM_SIZE: .long CFG_DRAM_SIZE - -/* wait for coprocessor write complete */ - .macro CPWAIT reg - mrc p15,0,\reg,c2,c0,0 - mov \reg,\reg - sub pc,pc,#4 - .endm - -_TEXT_BASE: - .word TEXT_BASE - - -/* - * Memory setup - */ - -.globl memsetup -memsetup: - - mov r10, lr - - /* Set up GPIO pins first ----------------------------------------- */ - - ldr r0, =GPSR0 - ldr r1, =CFG_GPSR0_VAL - str r1, [r0] - - ldr r0, =GPSR1 - ldr r1, =CFG_GPSR1_VAL - str r1, [r0] - - ldr r0, =GPSR2 - ldr r1, =CFG_GPSR2_VAL - str r1, [r0] - - ldr r0, =GPCR0 - ldr r1, =CFG_GPCR0_VAL - str r1, [r0] - - ldr r0, =GPCR1 - ldr r1, =CFG_GPCR1_VAL - str r1, [r0] - - ldr r0, =GPCR2 - ldr r1, =CFG_GPCR2_VAL - str r1, [r0] - - ldr r0, =GPDR0 - ldr r1, =CFG_GPDR0_VAL - str r1, [r0] - - ldr r0, =GPDR1 - ldr r1, =CFG_GPDR1_VAL - str r1, [r0] - - ldr r0, =GPDR2 - ldr r1, =CFG_GPDR2_VAL - str r1, [r0] - - ldr r0, =GAFR0_L - ldr r1, =CFG_GAFR0_L_VAL - str r1, [r0] - - ldr r0, =GAFR0_U - ldr r1, =CFG_GAFR0_U_VAL - str r1, [r0] - - ldr r0, =GAFR1_L - ldr r1, =CFG_GAFR1_L_VAL - str r1, [r0] - - ldr r0, =GAFR1_U - ldr r1, =CFG_GAFR1_U_VAL - str r1, [r0] - - ldr r0, =GAFR2_L - ldr r1, =CFG_GAFR2_L_VAL - str r1, [r0] - - ldr r0, =GAFR2_U - ldr r1, =CFG_GAFR2_U_VAL - str r1, [r0] - - ldr r0, =PSSR /* enable GPIO pins */ - ldr r1, =CFG_PSSR_VAL - str r1, [r0] - -/* ldr r3, =MSC1 / low - bank 2 Lubbock Registers / SRAM */ -/* ldr r2, =CFG_MSC1_VAL / high - bank 3 Ethernet Controller */ -/* str r2, [r3] / need to set MSC1 before trying to write to the HEX LEDs */ -/* ldr r2, [r3] / need to read it back to make sure the value latches (see MSC section of manual) */ -/* */ -/* ldr r1, =LED_BLANK */ -/* mov r0, #0xFF */ -/* str r0, [r1] / turn on hex leds */ -/* */ -/*loop: */ -/* */ -/* ldr r0, =0xB0070001 */ -/* ldr r1, =_LED */ -/* str r0, [r1] / hex display */ - - - /* ---------------------------------------------------------------- */ - /* Enable memory interface */ - /* */ - /* The sequence below is based on the recommended init steps */ - /* detailed in the Intel PXA250 Operating Systems Developers Guide, */ - /* Chapter 10. */ - /* ---------------------------------------------------------------- */ - - /* ---------------------------------------------------------------- */ - /* Step 1: Wait for at least 200 microsedonds to allow internal */ - /* clocks to settle. Only necessary after hard reset... */ - /* FIXME: can be optimized later */ - /* ---------------------------------------------------------------- */ - - ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ - /* so 0x300 should be plenty */ -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - -mem_init: - - ldr r1, =MEMC_BASE /* get memory controller base addr. */ - - /* ---------------------------------------------------------------- */ - /* Step 2a: Initialize Asynchronous static memory controller */ - /* ---------------------------------------------------------------- */ - - /* MSC registers: timing, bus width, mem type */ - - /* MSC0: nCS(0,1) */ - ldr r2, =CFG_MSC0_VAL - str r2, [r1, #MSC0_OFFSET] - ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */ - /* that data latches */ - /* MSC1: nCS(2,3) */ - ldr r2, =CFG_MSC1_VAL - str r2, [r1, #MSC1_OFFSET] - ldr r2, [r1, #MSC1_OFFSET] - - /* MSC2: nCS(4,5) */ - ldr r2, =CFG_MSC2_VAL - str r2, [r1, #MSC2_OFFSET] - ldr r2, [r1, #MSC2_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 2b: Initialize Card Interface */ - /* ---------------------------------------------------------------- */ - - /* MECR: Memory Expansion Card Register */ - ldr r2, =CFG_MECR_VAL - str r2, [r1, #MECR_OFFSET] - ldr r2, [r1, #MECR_OFFSET] - - /* MCMEM0: Card Interface slot 0 timing */ - ldr r2, =CFG_MCMEM0_VAL - str r2, [r1, #MCMEM0_OFFSET] - ldr r2, [r1, #MCMEM0_OFFSET] - - /* MCMEM1: Card Interface slot 1 timing */ - ldr r2, =CFG_MCMEM1_VAL - str r2, [r1, #MCMEM1_OFFSET] - ldr r2, [r1, #MCMEM1_OFFSET] - - /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ - ldr r2, =CFG_MCATT0_VAL - str r2, [r1, #MCATT0_OFFSET] - ldr r2, [r1, #MCATT0_OFFSET] - - /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ - ldr r2, =CFG_MCATT1_VAL - str r2, [r1, #MCATT1_OFFSET] - ldr r2, [r1, #MCATT1_OFFSET] - - /* MCIO0: Card Interface I/O Space Timing, slot 0 */ - ldr r2, =CFG_MCIO0_VAL - str r2, [r1, #MCIO0_OFFSET] - ldr r2, [r1, #MCIO0_OFFSET] - - /* MCIO1: Card Interface I/O Space Timing, slot 1 */ - ldr r2, =CFG_MCIO1_VAL - str r2, [r1, #MCIO1_OFFSET] - ldr r2, [r1, #MCIO1_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 2c: Write FLYCNFG FIXME: what's that??? */ - /* ---------------------------------------------------------------- */ - - /* test if we run from flash or RAM - RAM/BDI: don't setup RAM */ - adr r3, mem_init /* r0 <- current position of code */ - ldr r2, =mem_init - cmp r3, r2 /* skip init if in place */ - beq initirqs - - - /* ---------------------------------------------------------------- */ - /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */ - /* ---------------------------------------------------------------- */ - - /* Before accessing MDREFR we need a valid DRI field, so we set */ - /* this to power on defaults + DRI field. */ - - ldr r3, =CFG_MDREFR_VAL - ldr r2, =0xFFF - and r3, r3, r2 - ldr r4, =0x03ca4000 - orr r4, r4, r3 - - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] - - - /* ---------------------------------------------------------------- */ - /* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */ - /* ---------------------------------------------------------------- */ - - /* Initialize SXCNFG register. Assert the enable bits */ - - /* Write SXMRS to cause an MRS command to all enabled banks of */ - /* synchronous static memory. Note that SXLCR need not be written */ - /* at this time. */ - - /* FIXME: we use async mode for now */ - - - /* ---------------------------------------------------------------- */ - /* Step 4: Initialize SDRAM */ - /* ---------------------------------------------------------------- */ - - /* Step 4a: assert MDREFR:K?RUN and configure */ - /* MDREFR:K1DB2 and MDREFR:K2DB2 as desired. */ - - ldr r4, =CFG_MDREFR_VAL - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] - - /* Step 4b: de-assert MDREFR:SLFRSH. */ - - bic r4, r4, #(MDREFR_SLFRSH) - - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] - - - /* Step 4c: assert MDREFR:E1PIN and E0PIO */ - - orr r4, r4, #(MDREFR_E1PIN|MDREFR_E0PIN) - - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] - - - /* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */ - /* configure but not enable each SDRAM partition pair. */ - - ldr r4, =CFG_MDCNFG_VAL - bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1) - - str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */ - ldr r4, [r1, #MDCNFG_OFFSET] - - - /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */ - /* 100..200 µsec. */ - - ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ - /* so 0x300 should be plenty */ -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - - - /* Step 4f: Trigger a number (usually 8) refresh cycles by */ - /* attempting non-burst read or write accesses to disabled */ - /* SDRAM, as commonly specified in the power up sequence */ - /* documented in SDRAM data sheets. The address(es) used */ - /* for this purpose must not be cacheable. */ - - /* There should 9 writes, since the first write doesn't */ - /* trigger a refresh cycle on PXA250. See Intel PXA250 and */ - /* PXA210 Processors Specification Update, */ - /* Jan 2003, Errata #116, page 30. */ - - - ldr r3, =CFG_DRAM_BASE - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - - /* Step 4g: Write MDCNFG with enable bits asserted */ - /* (MDCNFG:DEx set to 1). */ - - ldr r3, [r1, #MDCNFG_OFFSET] - orr r3, r3, #(MDCNFG_DE0|MDCNFG_DE1) - str r3, [r1, #MDCNFG_OFFSET] - - /* Step 4h: Write MDMRS. */ - - ldr r2, =CFG_MDMRS_VAL - str r2, [r1, #MDMRS_OFFSET] - - - /* We are finished with Intel's memory controller initialisation */ - - /* ---------------------------------------------------------------- */ - /* Disable (mask) all interrupts at interrupt controller */ - /* ---------------------------------------------------------------- */ - -initirqs: - - mov r1, #0 /* clear int. level register (IRQ, not FIQ) */ - ldr r2, =ICLR - str r1, [r2] - - ldr r2, =ICMR /* mask all interrupts at the controller */ - str r1, [r2] - - - /* ---------------------------------------------------------------- */ - /* Clock initialisation */ - /* ---------------------------------------------------------------- */ - -initclks: - - /* Disable the peripheral clocks, and set the core clock frequency */ - /* (hard-coding at 398.12MHz for now). */ - - /* Turn Off ALL on-chip peripheral clocks for re-configuration */ - /* Note: See label 'ENABLECLKS' for the re-enabling */ - ldr r1, =CKEN - mov r2, #0 - str r2, [r1] - - - /* default value in case no valid rotary switch setting is found */ - ldr r2, =(CCCR_L27|CCCR_M2|CCCR_N10) /* DEFAULT: {200/200/100} */ - - /* ... and write the core clock config register */ - ldr r1, =CCCR - str r2, [r1] - - /* enable the 32Khz oscillator for RTC and PowerManager */ -/* - ldr r1, =OSCC - mov r2, #OSCC_OON - str r2, [r1] -*/ - /* NOTE: spin here until OSCC.OOK get set, meaning the PLL */ - /* has settled. */ -60: - ldr r2, [r1] - ands r2, r2, #1 - beq 60b - - /* ---------------------------------------------------------------- */ - /* */ - /* ---------------------------------------------------------------- */ - - /* Save SDRAM size */ - ldr r1, =DRAM_SIZE - str r8, [r1] - - /* Interrupt init: Mask all interrupts */ - ldr r0, =ICMR /* enable no sources */ - mov r1, #0 - str r1, [r0] - - /* FIXME */ - -#ifndef DEBUG - /*Disable software and data breakpoints */ - mov r0,#0 - mcr p15,0,r0,c14,c8,0 /* ibcr0 */ - mcr p15,0,r0,c14,c9,0 /* ibcr1 */ - mcr p15,0,r0,c14,c4,0 /* dbcon */ - - /*Enable all debug functionality */ - mov r0,#0x80000000 - mcr p14,0,r0,c10,c0,0 /* dcsr */ -#endif - - /* ---------------------------------------------------------------- */ - /* End memsetup */ - /* ---------------------------------------------------------------- */ - -endmemsetup: - - mov pc, lr diff --git a/board/dave/B2/Makefile b/board/dave/B2/Makefile index c0c3f6785b..548fd528ba 100644 --- a/board/dave/B2/Makefile +++ b/board/dave/B2/Makefile @@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := B2.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/dave/B2/lowlevel_init.S b/board/dave/B2/lowlevel_init.S new file mode 100644 index 0000000000..2f3a3645ed --- /dev/null +++ b/board/dave/B2/lowlevel_init.S @@ -0,0 +1,167 @@ +/* + * (C) Copyright 2004 + * DAVE Srl + * + * http://www.dave-tech.it + * http://www.wawnet.biz + * mailto:info@wawnet.biz + * + * memsetup-sa1110.S (blob): memory setup for various SA1110 architectures + * Modified By MATTO + * + * Copyright (C) 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +/* + * Documentation: + * Intel Corporation, "Intel StrongARM SA-1110 Microprocessor + * Advanced Developer's manual, December 1999 + * + * Intel has a very hard to find SDRAM configurator on their web site: + * http://appzone.intel.com/hcd/sa1110/memory/index.asp + * + * NOTE: This code assumes that an SA1110 CPU *always* uses SDRAM. This + * appears to be true, but it might be possible that somebody designs a + * board with mixed EDODRAM/SDRAM memory (which is a bad idea). -- Erik + * + * 04-10-2001: SELETZ + * - separated memory config for multiple platform support + * - perform SA1110 Hardware Reset Procedure + * + */ + +.equ B0_Tacs, 0x0 /* 0clk */ +.equ B0_Tcos, 0x0 /* 0clk */ +.equ B0_Tacc, 0x4 /* 6clk */ +.equ B0_Tcoh, 0x0 /* 0clk */ +.equ B0_Tah, 0x0 /* 0clk */ +.equ B0_Tacp, 0x0 /* 0clk */ +.equ B0_PMC, 0x0 /* normal(1data) */ +/* Bank 1 parameter */ +.equ B1_Tacs, 0x3 /* 4clk */ +.equ B1_Tcos, 0x3 /* 4clk */ +.equ B1_Tacc, 0x7 /* 14clkv */ +.equ B1_Tcoh, 0x3 /* 4clk */ +.equ B1_Tah, 0x3 /* 4clk */ +.equ B1_Tacp, 0x3 /* 6clk */ +.equ B1_PMC, 0x0 /* normal(1data) */ + +/* Bank 2 parameter - LAN91C96 */ +.equ B2_Tacs, 0x3 /* 4clk */ +.equ B2_Tcos, 0x3 /* 4clk */ +.equ B2_Tacc, 0x7 /* 14clk */ +.equ B2_Tcoh, 0x3 /* 4clk */ +.equ B2_Tah, 0x3 /* 4clk */ +.equ B2_Tacp, 0x3 /* 6clk */ +.equ B2_PMC, 0x0 /* normal(1data) */ + +/* Bank 3 parameter */ +.equ B3_Tacs, 0x3 /* 4clk */ +.equ B3_Tcos, 0x3 /* 4clk */ +.equ B3_Tacc, 0x7 /* 14clk */ +.equ B3_Tcoh, 0x3 /* 4clk */ +.equ B3_Tah, 0x3 /* 4clk */ +.equ B3_Tacp, 0x3 /* 6clk */ +.equ B3_PMC, 0x0 /* normal(1data) */ + +/* Bank 4 parameter */ +.equ B4_Tacs, 0x3 /* 4clk */ +.equ B4_Tcos, 0x3 /* 4clk */ +.equ B4_Tacc, 0x7 /* 14clk */ +.equ B4_Tcoh, 0x3 /* 4clk */ +.equ B4_Tah, 0x3 /* 4clk */ +.equ B4_Tacp, 0x3 /* 6clk */ +.equ B4_PMC, 0x0 /* normal(1data) */ + +/* Bank 5 parameter */ +.equ B5_Tacs, 0x3 /* 4clk */ +.equ B5_Tcos, 0x3 /* 4clk */ +.equ B5_Tacc, 0x7 /* 14clk */ +.equ B5_Tcoh, 0x3 /* 4clk */ +.equ B5_Tah, 0x3 /* 4clk */ +.equ B5_Tacp, 0x3 /* 6clk */ +.equ B5_PMC, 0x0 /* normal(1data) */ + +/* Bank 6(if SROM) parameter */ +.equ B6_Tacs, 0x3 /* 4clk */ +.equ B6_Tcos, 0x3 /* 4clk */ +.equ B6_Tacc, 0x7 /* 14clk */ +.equ B6_Tcoh, 0x3 /* 4clk */ +.equ B6_Tah, 0x3 /* 4clk */ +.equ B6_Tacp, 0x3 /* 6clk */ +.equ B6_PMC, 0x0 /* normal(1data) */ + +/* Bank 7(if SROM) parameter */ +.equ B7_Tacs, 0x3 /* 4clk */ +.equ B7_Tcos, 0x3 /* 4clk */ +.equ B7_Tacc, 0x7 /* 14clk */ +.equ B7_Tcoh, 0x3 /* 4clk */ +.equ B7_Tah, 0x3 /* 4clk */ +.equ B7_Tacp, 0x3 /* 6clk */ +.equ B7_PMC, 0x0 /* normal(1data) */ + +/* Bank 6 parameter */ +.equ B6_MT, 0x3 /* SDRAM */ +.equ B6_Trcd, 0x0 /* 2clk */ +.equ B6_SCAN, 0x0 /* 10bit */ + +.equ B7_MT, 0x3 /* SDRAM */ +.equ B7_Trcd, 0x0 /* 2clk */ +.equ B7_SCAN, 0x0 /* 10bit */ + + +/* REFRESH parameter */ +.equ REFEN, 0x1 /* Refresh enable */ +.equ TREFMD, 0x0 /* CBR(CAS before RAS)/Auto refresh */ +.equ Trp, 0x0 /* 2clk */ +.equ Trc, 0x3 /* 0x1=5clk 0x3=11clk*/ +.equ Tchr, 0x0 /* 0x2=3clk 0x0=0clks */ +.equ REFCNT, 879 + +MEMORY_CONFIG: + .long 0x12111900 /* Bank0 = OM[1:0] , Bank1-7 16bit, Bank2=Nowait,UB/LB*/ + .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) /*GCS0*/ + .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) /*GCS1*/ + .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) /*GCS2*/ + .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) /*GCS3*/ + .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) /*GCS4*/ + .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) /*GCS5*/ + .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) /*GCS6*/ + .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) /*GCS7*/ + .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) /*REFRESH RFEN=1, TREFMD=0, trp=3clk, trc=5clk, tchr=3clk,count=1019*/ + .word 0x17 /*SCLK power down mode, BANKSIZE 16M/16M*/ + .word 0x20 /*MRSR6 CL=2clk*/ + .word 0x20 /*MRSR7*/ + + +.globl lowlevel_init +lowlevel_init: + + /* + the next instruction fail due memory relocation... + we'll find the right MEMORY_CONFIG address with the next 3 lines... + */ + /*ldr r0, =MEMORY_CONFIG*/ + mov r0, pc + ldr r1, =(0x38+4) + sub r0, r0, r1 + + ldmia r0, {r1-r13} + ldr r0, =0x01c80000 + stmia r0, {r1-r13} + mov pc, lr diff --git a/board/dave/B2/memsetup.S b/board/dave/B2/memsetup.S deleted file mode 100644 index 3f64cb3749..0000000000 --- a/board/dave/B2/memsetup.S +++ /dev/null @@ -1,167 +0,0 @@ -/* - * (C) Copyright 2004 - * DAVE Srl - * - * http://www.dave-tech.it - * http://www.wawnet.biz - * mailto:info@wawnet.biz - * - * memsetup-sa1110.S (blob): memory setup for various SA1110 architectures - * Modified By MATTO - * - * Copyright (C) 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -/* - * Documentation: - * Intel Corporation, "Intel StrongARM SA-1110 Microprocessor - * Advanced Developer's manual, December 1999 - * - * Intel has a very hard to find SDRAM configurator on their web site: - * http://appzone.intel.com/hcd/sa1110/memory/index.asp - * - * NOTE: This code assumes that an SA1110 CPU *always* uses SDRAM. This - * appears to be true, but it might be possible that somebody designs a - * board with mixed EDODRAM/SDRAM memory (which is a bad idea). -- Erik - * - * 04-10-2001: SELETZ - * - separated memory config for multiple platform support - * - perform SA1110 Hardware Reset Procedure - * - */ - -.equ B0_Tacs, 0x0 /* 0clk */ -.equ B0_Tcos, 0x0 /* 0clk */ -.equ B0_Tacc, 0x4 /* 6clk */ -.equ B0_Tcoh, 0x0 /* 0clk */ -.equ B0_Tah, 0x0 /* 0clk */ -.equ B0_Tacp, 0x0 /* 0clk */ -.equ B0_PMC, 0x0 /* normal(1data) */ -/* Bank 1 parameter */ -.equ B1_Tacs, 0x3 /* 4clk */ -.equ B1_Tcos, 0x3 /* 4clk */ -.equ B1_Tacc, 0x7 /* 14clkv */ -.equ B1_Tcoh, 0x3 /* 4clk */ -.equ B1_Tah, 0x3 /* 4clk */ -.equ B1_Tacp, 0x3 /* 6clk */ -.equ B1_PMC, 0x0 /* normal(1data) */ - -/* Bank 2 parameter - LAN91C96 */ -.equ B2_Tacs, 0x3 /* 4clk */ -.equ B2_Tcos, 0x3 /* 4clk */ -.equ B2_Tacc, 0x7 /* 14clk */ -.equ B2_Tcoh, 0x3 /* 4clk */ -.equ B2_Tah, 0x3 /* 4clk */ -.equ B2_Tacp, 0x3 /* 6clk */ -.equ B2_PMC, 0x0 /* normal(1data) */ - -/* Bank 3 parameter */ -.equ B3_Tacs, 0x3 /* 4clk */ -.equ B3_Tcos, 0x3 /* 4clk */ -.equ B3_Tacc, 0x7 /* 14clk */ -.equ B3_Tcoh, 0x3 /* 4clk */ -.equ B3_Tah, 0x3 /* 4clk */ -.equ B3_Tacp, 0x3 /* 6clk */ -.equ B3_PMC, 0x0 /* normal(1data) */ - -/* Bank 4 parameter */ -.equ B4_Tacs, 0x3 /* 4clk */ -.equ B4_Tcos, 0x3 /* 4clk */ -.equ B4_Tacc, 0x7 /* 14clk */ -.equ B4_Tcoh, 0x3 /* 4clk */ -.equ B4_Tah, 0x3 /* 4clk */ -.equ B4_Tacp, 0x3 /* 6clk */ -.equ B4_PMC, 0x0 /* normal(1data) */ - -/* Bank 5 parameter */ -.equ B5_Tacs, 0x3 /* 4clk */ -.equ B5_Tcos, 0x3 /* 4clk */ -.equ B5_Tacc, 0x7 /* 14clk */ -.equ B5_Tcoh, 0x3 /* 4clk */ -.equ B5_Tah, 0x3 /* 4clk */ -.equ B5_Tacp, 0x3 /* 6clk */ -.equ B5_PMC, 0x0 /* normal(1data) */ - -/* Bank 6(if SROM) parameter */ -.equ B6_Tacs, 0x3 /* 4clk */ -.equ B6_Tcos, 0x3 /* 4clk */ -.equ B6_Tacc, 0x7 /* 14clk */ -.equ B6_Tcoh, 0x3 /* 4clk */ -.equ B6_Tah, 0x3 /* 4clk */ -.equ B6_Tacp, 0x3 /* 6clk */ -.equ B6_PMC, 0x0 /* normal(1data) */ - -/* Bank 7(if SROM) parameter */ -.equ B7_Tacs, 0x3 /* 4clk */ -.equ B7_Tcos, 0x3 /* 4clk */ -.equ B7_Tacc, 0x7 /* 14clk */ -.equ B7_Tcoh, 0x3 /* 4clk */ -.equ B7_Tah, 0x3 /* 4clk */ -.equ B7_Tacp, 0x3 /* 6clk */ -.equ B7_PMC, 0x0 /* normal(1data) */ - -/* Bank 6 parameter */ -.equ B6_MT, 0x3 /* SDRAM */ -.equ B6_Trcd, 0x0 /* 2clk */ -.equ B6_SCAN, 0x0 /* 10bit */ - -.equ B7_MT, 0x3 /* SDRAM */ -.equ B7_Trcd, 0x0 /* 2clk */ -.equ B7_SCAN, 0x0 /* 10bit */ - - -/* REFRESH parameter */ -.equ REFEN, 0x1 /* Refresh enable */ -.equ TREFMD, 0x0 /* CBR(CAS before RAS)/Auto refresh */ -.equ Trp, 0x0 /* 2clk */ -.equ Trc, 0x3 /* 0x1=5clk 0x3=11clk*/ -.equ Tchr, 0x0 /* 0x2=3clk 0x0=0clks */ -.equ REFCNT, 879 - -MEMORY_CONFIG: - .long 0x12111900 /* Bank0 = OM[1:0] , Bank1-7 16bit, Bank2=Nowait,UB/LB*/ - .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) /*GCS0*/ - .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) /*GCS1*/ - .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) /*GCS2*/ - .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) /*GCS3*/ - .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) /*GCS4*/ - .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) /*GCS5*/ - .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) /*GCS6*/ - .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) /*GCS7*/ - .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) /*REFRESH RFEN=1, TREFMD=0, trp=3clk, trc=5clk, tchr=3clk,count=1019*/ - .word 0x17 /*SCLK power down mode, BANKSIZE 16M/16M*/ - .word 0x20 /*MRSR6 CL=2clk*/ - .word 0x20 /*MRSR7*/ - - -.globl memsetup -memsetup: - - /* - the next instruction fail due memory relocation... - we'll find the right MEMORY_CONFIG address with the next 3 lines... - */ - /*ldr r0, =MEMORY_CONFIG*/ - mov r0, pc - ldr r1, =(0x38+4) - sub r0, r0, r1 - - ldmia r0, {r1-r13} - ldr r0, =0x01c80000 - stmia r0, {r1-r13} - mov pc, lr diff --git a/board/dbau1x00/Makefile b/board/dbau1x00/Makefile index d1cdc6b924..d9b0e2d258 100644 --- a/board/dbau1x00/Makefile +++ b/board/dbau1x00/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS = $(BOARD).o flash.o -SOBJS = memsetup.o +SOBJS = lowlevel_init.o $(LIB): .depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/dbau1x00/lowlevel_init.S b/board/dbau1x00/lowlevel_init.S new file mode 100644 index 0000000000..7afd5840c8 --- /dev/null +++ b/board/dbau1x00/lowlevel_init.S @@ -0,0 +1,587 @@ +/* Memory sub-system initialization code */ + +#include +#include +#include +#include +#include + +#define AU1500_SYS_ADDR 0xB1900000 +#define sys_endian 0x0038 +#define CP0_Config0 $16 +#define CPU_SCALE ((CFG_MHZ) / 12) /* CPU clock is a multiple of 12 MHz */ +#define MEM_1MS ((CFG_MHZ) * 1000) + + .text + .set noreorder + .set mips32 + + .globl lowlevel_init +lowlevel_init: + /* + * Step 1) Establish CPU endian mode. + * Db1500-specific: + * Switch S1.1 Off(bit7 reads 1) is Little Endian + * Switch S1.1 On (bit7 reads 0) is Big Endian + */ +#ifdef CONFIG_DBAU1550 + li t0, MEM_STCFG2 + li t1, 0x00000040 + sw t1, 0(t0) + + li t0, MEM_STTIME2 + li t1, 0x22080a20 + sw t1, 0(t0) + + li t0, MEM_STADDR2 + li t1, 0x10c03f00 + sw t1, 0(t0) +#else + li t0, MEM_STCFG1 + li t1, 0x00000080 + sw t1, 0(t0) + + li t0, MEM_STTIME1 + li t1, 0x22080a20 + sw t1, 0(t0) + + li t0, MEM_STADDR1 + li t1, 0x10c03f00 + sw t1, 0(t0) +#endif + + li t0, DB1XX0_BCSR_ADDR + lw t1,8(t0) + andi t1,t1,0x80 + beq zero,t1,big_endian + nop +little_endian: + + /* Change Au1 core to little endian */ + li t0, AU1500_SYS_ADDR + li t1, 1 + sw t1, sys_endian(t0) + mfc0 t2, CP0_CONFIG + mtc0 t2, CP0_CONFIG + nop + nop + + /* Big Endian is default so nothing to do but fall through */ + +big_endian: + + /* + * Step 2) Establish Status Register + * (set BEV, clear ERL, clear EXL, clear IE) + */ + li t1, 0x00400000 + mtc0 t1, CP0_STATUS + + /* + * Step 3) Establish CP0 Config0 + * (set OD, set K0=3) + */ + li t1, 0x00080003 + mtc0 t1, CP0_CONFIG + + /* + * Step 4) Disable Watchpoint facilities + */ + li t1, 0x00000000 + mtc0 t1, CP0_WATCHLO + mtc0 t1, CP0_IWATCHLO + /* + * Step 5) Disable the performance counters + */ + mtc0 zero, CP0_PERFORMANCE + nop + + /* + * Step 6) Establish EJTAG Debug register + */ + mtc0 zero, CP0_DEBUG + nop + + /* + * Step 7) Establish Cause + * (set IV bit) + */ + li t1, 0x00800000 + mtc0 t1, CP0_CAUSE + + /* Establish Wired (and Random) */ + mtc0 zero, CP0_WIRED + nop + +#ifdef CONFIG_DBAU1550 + /* No workaround if running from ram */ + lui t0, 0xffc0 + lui t3, 0xbfc0 + and t1, ra, t0 + bne t1, t3, noCacheJump + nop + + /*** From AMD YAMON ***/ + /* + * Step 8) Initialize the caches + */ + li t0, (16*1024) + li t1, 32 + li t2, 0x80000000 + addu t3, t0, t2 +cacheloop: + cache 0, 0(t2) + cache 1, 0(t2) + addu t2, t1 + bne t2, t3, cacheloop + nop + + /* Save return address */ + move t3, ra + + /* Run from cacheable space now */ + bal cachehere + nop +cachehere: + li t1, ~0x20000000 /* convert to KSEG0 */ + and t0, ra, t1 + addi t0, 5*4 /* 5 insns beyond cachehere */ + jr t0 + nop + + /* Restore return address */ + move ra, t3 + + /* + * Step 9) Initialize the TLB + */ + li t0, 0 # index value + li t1, 0x00000000 # entryhi value + li t2, 32 # 32 entries + +tlbloop: + /* Probe TLB for matching EntryHi */ + mtc0 t1, CP0_ENTRYHI + tlbp + nop + + /* Examine Index[P], 1=no matching entry */ + mfc0 t3, CP0_INDEX + li t4, 0x80000000 + and t3, t4, t3 + addiu t1, t1, 1 # increment t1 (asid) + beq zero, t3, tlbloop + nop + + /* Initialize the TLB entry */ + mtc0 t0, CP0_INDEX + mtc0 zero, CP0_ENTRYLO0 + mtc0 zero, CP0_ENTRYLO1 + mtc0 zero, CP0_PAGEMASK + tlbwi + + /* Do it again */ + addiu t0, t0, 1 + bne t0, t2, tlbloop + nop + + /* First setup pll:s to make serial work ok */ + /* We have a 12 MHz crystal */ + li t0, SYS_CPUPLL + li t1, CPU_SCALE /* CPU clock */ + sw t1, 0(t0) + sync + nop + nop + + /* wait 1mS for clocks to settle */ + li t1, MEM_1MS +1: add t1, -1 + bne t1, zero, 1b + nop + /* Setup AUX PLL */ + li t0, SYS_AUXPLL + li t1, 0x20 /* 96 MHz */ + sw t1, 0(t0) /* aux pll */ + sync + + /* Static memory controller */ + /* RCE0 - can not change while fetching, do so from icache */ + move t2, ra /* Store return address */ + bal getAddr + nop + +getAddr: + move t1, ra + move ra, t2 /* Move return addess back */ + + cache 0x14,0(t1) + cache 0x14,32(t1) + /*** /From YAMON ***/ + +noCacheJump: +#endif /* CONFIG_DBAU1550 */ + +#ifdef CONFIG_DBAU1550 + li t0, MEM_STTIME0 + li t1, 0x040181D7 + sw t1, 0(t0) + + /* RCE0 AMD MirrorBit Flash (?) */ + li t0, MEM_STCFG0 + li t1, 0x00000003 + sw t1, 0(t0) + + li t0, MEM_STADDR0 + li t1, 0x11803E00 + sw t1, 0(t0) +#else /* CONFIG_DBAU1550 */ + li t0, MEM_STTIME0 + li t1, 0x00014C0F + sw t1, 0(t0) + + /* RCE0 AMD 29LV640M MirrorBit Flash */ + li t0, MEM_STCFG0 + li t1, 0x00000013 + sw t1, 0(t0) + + li t0, MEM_STADDR0 + li t1, 0x11E03F80 + sw t1, 0(t0) +#endif /* CONFIG_DBAU1550 */ + + /* RCE1 CPLD Board Logic */ + li t0, MEM_STCFG1 + li t1, 0x00000080 + sw t1, 0(t0) + + li t0, MEM_STTIME1 + li t1, 0x22080a20 + sw t1, 0(t0) + + li t0, MEM_STADDR1 + li t1, 0x10c03f00 + sw t1, 0(t0) + +#ifdef CONFIG_DBAU1550 + /* RCE2 CPLD Board Logic */ + li t0, MEM_STCFG2 + li t1, 0x00000040 + sw t1, 0(t0) + + li t0, MEM_STTIME2 + li t1, 0x22080a20 + sw t1, 0(t0) + + li t0, MEM_STADDR2 + li t1, 0x10c03f00 + sw t1, 0(t0) +#else + li t0, MEM_STCFG2 + li t1, 0x00000000 + sw t1, 0(t0) + + li t0, MEM_STTIME2 + li t1, 0x00000000 + sw t1, 0(t0) + + li t0, MEM_STADDR2 + li t1, 0x00000000 + sw t1, 0(t0) +#endif + + /* RCE3 PCMCIA 250ns */ + li t0, MEM_STCFG3 + li t1, 0x00000002 + sw t1, 0(t0) + + li t0, MEM_STTIME3 + li t1, 0x280E3E07 + sw t1, 0(t0) + + li t0, MEM_STADDR3 + li t1, 0x10000000 + sw t1, 0(t0) + + sync + + /* Set peripherals to a known state */ + li t0, IC0_CFG0CLR + li t1, 0xFFFFFFFF + sw t1, 0(t0) + + li t0, IC0_CFG0CLR + sw t1, 0(t0) + + li t0, IC0_CFG1CLR + sw t1, 0(t0) + + li t0, IC0_CFG2CLR + sw t1, 0(t0) + + li t0, IC0_SRCSET + sw t1, 0(t0) + + li t0, IC0_ASSIGNSET + sw t1, 0(t0) + + li t0, IC0_WAKECLR + sw t1, 0(t0) + + li t0, IC0_RISINGCLR + sw t1, 0(t0) + + li t0, IC0_FALLINGCLR + sw t1, 0(t0) + + li t0, IC0_TESTBIT + li t1, 0x00000000 + sw t1, 0(t0) + sync + + li t0, IC1_CFG0CLR + li t1, 0xFFFFFFFF + sw t1, 0(t0) + + li t0, IC1_CFG0CLR + sw t1, 0(t0) + + li t0, IC1_CFG1CLR + sw t1, 0(t0) + + li t0, IC1_CFG2CLR + sw t1, 0(t0) + + li t0, IC1_SRCSET + sw t1, 0(t0) + + li t0, IC1_ASSIGNSET + sw t1, 0(t0) + + li t0, IC1_WAKECLR + sw t1, 0(t0) + + li t0, IC1_RISINGCLR + sw t1, 0(t0) + + li t0, IC1_FALLINGCLR + sw t1, 0(t0) + + li t0, IC1_TESTBIT + li t1, 0x00000000 + sw t1, 0(t0) + sync + + li t0, SYS_FREQCTRL0 + li t1, 0x00000000 + sw t1, 0(t0) + + li t0, SYS_FREQCTRL1 + li t1, 0x00000000 + sw t1, 0(t0) + + li t0, SYS_CLKSRC + li t1, 0x00000000 + sw t1, 0(t0) + + li t0, SYS_PININPUTEN + li t1, 0x00000000 + sw t1, 0(t0) + sync + + li t0, 0xB1100100 + li t1, 0x00000000 + sw t1, 0(t0) + + li t0, 0xB1400100 + li t1, 0x00000000 + sw t1, 0(t0) + + + li t0, SYS_WAKEMSK + li t1, 0x00000000 + sw t1, 0(t0) + + li t0, SYS_WAKESRC + li t1, 0x00000000 + sw t1, 0(t0) + + /* wait 1mS before setup */ + li t1, MEM_1MS +1: add t1, -1 + bne t1, zero, 1b + nop + +#ifdef CONFIG_DBAU1550 +/* SDCS 0,1,2 DDR SDRAM */ + li t0, MEM_SDMODE0 + li t1, 0x04276221 + sw t1, 0(t0) + + li t0, MEM_SDMODE1 + li t1, 0x04276221 + sw t1, 0(t0) + + li t0, MEM_SDMODE2 + li t1, 0x04276221 + sw t1, 0(t0) + + li t0, MEM_SDADDR0 + li t1, 0xe21003f0 + sw t1, 0(t0) + + li t0, MEM_SDADDR1 + li t1, 0xe21043f0 + sw t1, 0(t0) + + li t0, MEM_SDADDR2 + li t1, 0xe21083f0 + sw t1, 0(t0) + + sync + + li t0, MEM_SDCONFIGA + li t1, 0x9030060a /* Program refresh - disabled */ + sw t1, 0(t0) + sync + + li t0, MEM_SDCONFIGB + li t1, 0x00028000 + sw t1, 0(t0) + sync + + li t0, MEM_SDPRECMD /* Precharge all */ + li t1, 0 + sw t1, 0(t0) + sync + + li t0, MEM_SDWRMD0 + li t1, 0x40000000 + sw t1, 0(t0) + sync + + li t0, MEM_SDWRMD1 + li t1, 0x40000000 + sw t1, 0(t0) + sync + + li t0, MEM_SDWRMD2 + li t1, 0x40000000 + sw t1, 0(t0) + sync + + li t0, MEM_SDWRMD0 + li t1, 0x00000063 + sw t1, 0(t0) + sync + + li t0, MEM_SDWRMD1 + li t1, 0x00000063 + sw t1, 0(t0) + sync + + li t0, MEM_SDWRMD2 + li t1, 0x00000063 + sw t1, 0(t0) + sync + + li t0, MEM_SDPRECMD /* Precharge all */ + sw zero, 0(t0) + sync + + /* Issue 2 autoref */ + li t0, MEM_SDAUTOREF + sw zero, 0(t0) + sync + + li t0, MEM_SDAUTOREF + sw zero, 0(t0) + sync + + /* Enable refresh */ + li t0, MEM_SDCONFIGA + li t1, 0x9830060a /* Program refresh - enabled */ + sw t1, 0(t0) + sync + +#else /* CONFIG_DBAU1550 */ +/* SDCS 0,1 SDRAM */ + li t0, MEM_SDMODE0 + li t1, 0x005522AA + sw t1, 0(t0) + + li t0, MEM_SDMODE1 + li t1, 0x005522AA + sw t1, 0(t0) + + li t0, MEM_SDMODE2 + li t1, 0x00000000 + sw t1, 0(t0) + + li t0, MEM_SDADDR0 + li t1, 0x001003F8 + sw t1, 0(t0) + + + li t0, MEM_SDADDR1 + li t1, 0x001023F8 + sw t1, 0(t0) + + li t0, MEM_SDADDR2 + li t1, 0x00000000 + sw t1, 0(t0) + + sync + + li t0, MEM_SDREFCFG + li t1, 0x64000C24 /* Disable */ + sw t1, 0(t0) + sync + + li t0, MEM_SDPRECMD + sw zero, 0(t0) + sync + + li t0, MEM_SDAUTOREF + sw zero, 0(t0) + sync + sw zero, 0(t0) + sync + + li t0, MEM_SDREFCFG + li t1, 0x66000C24 /* Enable */ + sw t1, 0(t0) + sync + + li t0, MEM_SDWRMD0 + li t1, 0x00000033 + sw t1, 0(t0) + sync + + li t0, MEM_SDWRMD1 + li t1, 0x00000033 + sw t1, 0(t0) + sync + +#endif /* CONFIG_DBAU1550 */ + /* wait 1mS after setup */ + li t1, MEM_1MS +1: add t1, -1 + bne t1, zero, 1b + nop + + li t0, SYS_PINFUNC + li t1, 0x00008080 + sw t1, 0(t0) + + li t0, SYS_TRIOUTCLR + li t1, 0x00001FFF + sw t1, 0(t0) + + li t0, SYS_OUTPUTCLR + li t1, 0x00008000 + sw t1, 0(t0) + sync + + j ra + nop diff --git a/board/dbau1x00/memsetup.S b/board/dbau1x00/memsetup.S deleted file mode 100644 index c96d8a5099..0000000000 --- a/board/dbau1x00/memsetup.S +++ /dev/null @@ -1,587 +0,0 @@ -/* Memory sub-system initialization code */ - -#include -#include -#include -#include -#include - -#define AU1500_SYS_ADDR 0xB1900000 -#define sys_endian 0x0038 -#define CP0_Config0 $16 -#define CPU_SCALE ((CFG_MHZ) / 12) /* CPU clock is a multiple of 12 MHz */ -#define MEM_1MS ((CFG_MHZ) * 1000) - - .text - .set noreorder - .set mips32 - - .globl memsetup -memsetup: - /* - * Step 1) Establish CPU endian mode. - * Db1500-specific: - * Switch S1.1 Off(bit7 reads 1) is Little Endian - * Switch S1.1 On (bit7 reads 0) is Big Endian - */ -#ifdef CONFIG_DBAU1550 - li t0, MEM_STCFG2 - li t1, 0x00000040 - sw t1, 0(t0) - - li t0, MEM_STTIME2 - li t1, 0x22080a20 - sw t1, 0(t0) - - li t0, MEM_STADDR2 - li t1, 0x10c03f00 - sw t1, 0(t0) -#else - li t0, MEM_STCFG1 - li t1, 0x00000080 - sw t1, 0(t0) - - li t0, MEM_STTIME1 - li t1, 0x22080a20 - sw t1, 0(t0) - - li t0, MEM_STADDR1 - li t1, 0x10c03f00 - sw t1, 0(t0) -#endif - - li t0, DB1XX0_BCSR_ADDR - lw t1,8(t0) - andi t1,t1,0x80 - beq zero,t1,big_endian - nop -little_endian: - - /* Change Au1 core to little endian */ - li t0, AU1500_SYS_ADDR - li t1, 1 - sw t1, sys_endian(t0) - mfc0 t2, CP0_CONFIG - mtc0 t2, CP0_CONFIG - nop - nop - - /* Big Endian is default so nothing to do but fall through */ - -big_endian: - - /* - * Step 2) Establish Status Register - * (set BEV, clear ERL, clear EXL, clear IE) - */ - li t1, 0x00400000 - mtc0 t1, CP0_STATUS - - /* - * Step 3) Establish CP0 Config0 - * (set OD, set K0=3) - */ - li t1, 0x00080003 - mtc0 t1, CP0_CONFIG - - /* - * Step 4) Disable Watchpoint facilities - */ - li t1, 0x00000000 - mtc0 t1, CP0_WATCHLO - mtc0 t1, CP0_IWATCHLO - /* - * Step 5) Disable the performance counters - */ - mtc0 zero, CP0_PERFORMANCE - nop - - /* - * Step 6) Establish EJTAG Debug register - */ - mtc0 zero, CP0_DEBUG - nop - - /* - * Step 7) Establish Cause - * (set IV bit) - */ - li t1, 0x00800000 - mtc0 t1, CP0_CAUSE - - /* Establish Wired (and Random) */ - mtc0 zero, CP0_WIRED - nop - -#ifdef CONFIG_DBAU1550 - /* No workaround if running from ram */ - lui t0, 0xffc0 - lui t3, 0xbfc0 - and t1, ra, t0 - bne t1, t3, noCacheJump - nop - - /*** From AMD YAMON ***/ - /* - * Step 8) Initialize the caches - */ - li t0, (16*1024) - li t1, 32 - li t2, 0x80000000 - addu t3, t0, t2 -cacheloop: - cache 0, 0(t2) - cache 1, 0(t2) - addu t2, t1 - bne t2, t3, cacheloop - nop - - /* Save return address */ - move t3, ra - - /* Run from cacheable space now */ - bal cachehere - nop -cachehere: - li t1, ~0x20000000 /* convert to KSEG0 */ - and t0, ra, t1 - addi t0, 5*4 /* 5 insns beyond cachehere */ - jr t0 - nop - - /* Restore return address */ - move ra, t3 - - /* - * Step 9) Initialize the TLB - */ - li t0, 0 # index value - li t1, 0x00000000 # entryhi value - li t2, 32 # 32 entries - -tlbloop: - /* Probe TLB for matching EntryHi */ - mtc0 t1, CP0_ENTRYHI - tlbp - nop - - /* Examine Index[P], 1=no matching entry */ - mfc0 t3, CP0_INDEX - li t4, 0x80000000 - and t3, t4, t3 - addiu t1, t1, 1 # increment t1 (asid) - beq zero, t3, tlbloop - nop - - /* Initialize the TLB entry */ - mtc0 t0, CP0_INDEX - mtc0 zero, CP0_ENTRYLO0 - mtc0 zero, CP0_ENTRYLO1 - mtc0 zero, CP0_PAGEMASK - tlbwi - - /* Do it again */ - addiu t0, t0, 1 - bne t0, t2, tlbloop - nop - - /* First setup pll:s to make serial work ok */ - /* We have a 12 MHz crystal */ - li t0, SYS_CPUPLL - li t1, CPU_SCALE /* CPU clock */ - sw t1, 0(t0) - sync - nop - nop - - /* wait 1mS for clocks to settle */ - li t1, MEM_1MS -1: add t1, -1 - bne t1, zero, 1b - nop - /* Setup AUX PLL */ - li t0, SYS_AUXPLL - li t1, 0x20 /* 96 MHz */ - sw t1, 0(t0) /* aux pll */ - sync - - /* Static memory controller */ - /* RCE0 - can not change while fetching, do so from icache */ - move t2, ra /* Store return address */ - bal getAddr - nop - -getAddr: - move t1, ra - move ra, t2 /* Move return addess back */ - - cache 0x14,0(t1) - cache 0x14,32(t1) - /*** /From YAMON ***/ - -noCacheJump: -#endif /* CONFIG_DBAU1550 */ - -#ifdef CONFIG_DBAU1550 - li t0, MEM_STTIME0 - li t1, 0x040181D7 - sw t1, 0(t0) - - /* RCE0 AMD MirrorBit Flash (?) */ - li t0, MEM_STCFG0 - li t1, 0x00000003 - sw t1, 0(t0) - - li t0, MEM_STADDR0 - li t1, 0x11803E00 - sw t1, 0(t0) -#else /* CONFIG_DBAU1550 */ - li t0, MEM_STTIME0 - li t1, 0x00014C0F - sw t1, 0(t0) - - /* RCE0 AMD 29LV640M MirrorBit Flash */ - li t0, MEM_STCFG0 - li t1, 0x00000013 - sw t1, 0(t0) - - li t0, MEM_STADDR0 - li t1, 0x11E03F80 - sw t1, 0(t0) -#endif /* CONFIG_DBAU1550 */ - - /* RCE1 CPLD Board Logic */ - li t0, MEM_STCFG1 - li t1, 0x00000080 - sw t1, 0(t0) - - li t0, MEM_STTIME1 - li t1, 0x22080a20 - sw t1, 0(t0) - - li t0, MEM_STADDR1 - li t1, 0x10c03f00 - sw t1, 0(t0) - -#ifdef CONFIG_DBAU1550 - /* RCE2 CPLD Board Logic */ - li t0, MEM_STCFG2 - li t1, 0x00000040 - sw t1, 0(t0) - - li t0, MEM_STTIME2 - li t1, 0x22080a20 - sw t1, 0(t0) - - li t0, MEM_STADDR2 - li t1, 0x10c03f00 - sw t1, 0(t0) -#else - li t0, MEM_STCFG2 - li t1, 0x00000000 - sw t1, 0(t0) - - li t0, MEM_STTIME2 - li t1, 0x00000000 - sw t1, 0(t0) - - li t0, MEM_STADDR2 - li t1, 0x00000000 - sw t1, 0(t0) -#endif - - /* RCE3 PCMCIA 250ns */ - li t0, MEM_STCFG3 - li t1, 0x00000002 - sw t1, 0(t0) - - li t0, MEM_STTIME3 - li t1, 0x280E3E07 - sw t1, 0(t0) - - li t0, MEM_STADDR3 - li t1, 0x10000000 - sw t1, 0(t0) - - sync - - /* Set peripherals to a known state */ - li t0, IC0_CFG0CLR - li t1, 0xFFFFFFFF - sw t1, 0(t0) - - li t0, IC0_CFG0CLR - sw t1, 0(t0) - - li t0, IC0_CFG1CLR - sw t1, 0(t0) - - li t0, IC0_CFG2CLR - sw t1, 0(t0) - - li t0, IC0_SRCSET - sw t1, 0(t0) - - li t0, IC0_ASSIGNSET - sw t1, 0(t0) - - li t0, IC0_WAKECLR - sw t1, 0(t0) - - li t0, IC0_RISINGCLR - sw t1, 0(t0) - - li t0, IC0_FALLINGCLR - sw t1, 0(t0) - - li t0, IC0_TESTBIT - li t1, 0x00000000 - sw t1, 0(t0) - sync - - li t0, IC1_CFG0CLR - li t1, 0xFFFFFFFF - sw t1, 0(t0) - - li t0, IC1_CFG0CLR - sw t1, 0(t0) - - li t0, IC1_CFG1CLR - sw t1, 0(t0) - - li t0, IC1_CFG2CLR - sw t1, 0(t0) - - li t0, IC1_SRCSET - sw t1, 0(t0) - - li t0, IC1_ASSIGNSET - sw t1, 0(t0) - - li t0, IC1_WAKECLR - sw t1, 0(t0) - - li t0, IC1_RISINGCLR - sw t1, 0(t0) - - li t0, IC1_FALLINGCLR - sw t1, 0(t0) - - li t0, IC1_TESTBIT - li t1, 0x00000000 - sw t1, 0(t0) - sync - - li t0, SYS_FREQCTRL0 - li t1, 0x00000000 - sw t1, 0(t0) - - li t0, SYS_FREQCTRL1 - li t1, 0x00000000 - sw t1, 0(t0) - - li t0, SYS_CLKSRC - li t1, 0x00000000 - sw t1, 0(t0) - - li t0, SYS_PININPUTEN - li t1, 0x00000000 - sw t1, 0(t0) - sync - - li t0, 0xB1100100 - li t1, 0x00000000 - sw t1, 0(t0) - - li t0, 0xB1400100 - li t1, 0x00000000 - sw t1, 0(t0) - - - li t0, SYS_WAKEMSK - li t1, 0x00000000 - sw t1, 0(t0) - - li t0, SYS_WAKESRC - li t1, 0x00000000 - sw t1, 0(t0) - - /* wait 1mS before setup */ - li t1, MEM_1MS -1: add t1, -1 - bne t1, zero, 1b - nop - -#ifdef CONFIG_DBAU1550 -/* SDCS 0,1,2 DDR SDRAM */ - li t0, MEM_SDMODE0 - li t1, 0x04276221 - sw t1, 0(t0) - - li t0, MEM_SDMODE1 - li t1, 0x04276221 - sw t1, 0(t0) - - li t0, MEM_SDMODE2 - li t1, 0x04276221 - sw t1, 0(t0) - - li t0, MEM_SDADDR0 - li t1, 0xe21003f0 - sw t1, 0(t0) - - li t0, MEM_SDADDR1 - li t1, 0xe21043f0 - sw t1, 0(t0) - - li t0, MEM_SDADDR2 - li t1, 0xe21083f0 - sw t1, 0(t0) - - sync - - li t0, MEM_SDCONFIGA - li t1, 0x9030060a /* Program refresh - disabled */ - sw t1, 0(t0) - sync - - li t0, MEM_SDCONFIGB - li t1, 0x00028000 - sw t1, 0(t0) - sync - - li t0, MEM_SDPRECMD /* Precharge all */ - li t1, 0 - sw t1, 0(t0) - sync - - li t0, MEM_SDWRMD0 - li t1, 0x40000000 - sw t1, 0(t0) - sync - - li t0, MEM_SDWRMD1 - li t1, 0x40000000 - sw t1, 0(t0) - sync - - li t0, MEM_SDWRMD2 - li t1, 0x40000000 - sw t1, 0(t0) - sync - - li t0, MEM_SDWRMD0 - li t1, 0x00000063 - sw t1, 0(t0) - sync - - li t0, MEM_SDWRMD1 - li t1, 0x00000063 - sw t1, 0(t0) - sync - - li t0, MEM_SDWRMD2 - li t1, 0x00000063 - sw t1, 0(t0) - sync - - li t0, MEM_SDPRECMD /* Precharge all */ - sw zero, 0(t0) - sync - - /* Issue 2 autoref */ - li t0, MEM_SDAUTOREF - sw zero, 0(t0) - sync - - li t0, MEM_SDAUTOREF - sw zero, 0(t0) - sync - - /* Enable refresh */ - li t0, MEM_SDCONFIGA - li t1, 0x9830060a /* Program refresh - enabled */ - sw t1, 0(t0) - sync - -#else /* CONFIG_DBAU1550 */ -/* SDCS 0,1 SDRAM */ - li t0, MEM_SDMODE0 - li t1, 0x005522AA - sw t1, 0(t0) - - li t0, MEM_SDMODE1 - li t1, 0x005522AA - sw t1, 0(t0) - - li t0, MEM_SDMODE2 - li t1, 0x00000000 - sw t1, 0(t0) - - li t0, MEM_SDADDR0 - li t1, 0x001003F8 - sw t1, 0(t0) - - - li t0, MEM_SDADDR1 - li t1, 0x001023F8 - sw t1, 0(t0) - - li t0, MEM_SDADDR2 - li t1, 0x00000000 - sw t1, 0(t0) - - sync - - li t0, MEM_SDREFCFG - li t1, 0x64000C24 /* Disable */ - sw t1, 0(t0) - sync - - li t0, MEM_SDPRECMD - sw zero, 0(t0) - sync - - li t0, MEM_SDAUTOREF - sw zero, 0(t0) - sync - sw zero, 0(t0) - sync - - li t0, MEM_SDREFCFG - li t1, 0x66000C24 /* Enable */ - sw t1, 0(t0) - sync - - li t0, MEM_SDWRMD0 - li t1, 0x00000033 - sw t1, 0(t0) - sync - - li t0, MEM_SDWRMD1 - li t1, 0x00000033 - sw t1, 0(t0) - sync - -#endif /* CONFIG_DBAU1550 */ - /* wait 1mS after setup */ - li t1, MEM_1MS -1: add t1, -1 - bne t1, zero, 1b - nop - - li t0, SYS_PINFUNC - li t1, 0x00008080 - sw t1, 0(t0) - - li t0, SYS_TRIOUTCLR - li t1, 0x00001FFF - sw t1, 0(t0) - - li t0, SYS_OUTPUTCLR - li t1, 0x00008000 - sw t1, 0(t0) - sync - - j ra - nop diff --git a/board/dnp1110/Makefile b/board/dnp1110/Makefile index 31ef6954cd..eaa38bc3c1 100644 --- a/board/dnp1110/Makefile +++ b/board/dnp1110/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := dnp1110.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/dnp1110/lowlevel_init.S b/board/dnp1110/lowlevel_init.S new file mode 100644 index 0000000000..7730be3437 --- /dev/null +++ b/board/dnp1110/lowlevel_init.S @@ -0,0 +1,135 @@ +/* + * Memory Setup stuff - taken from blob memsetup.S + * + * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and + * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include "config.h" +#include "version.h" + + +/* some parameters for the board */ + +MEM_BASE: .long 0xa0000000 +MEM_START: .long 0xc0000000 + +#define MDCNFG 0x00 +#define MDCAS00 0x04 /* CAS waveform rotate reg 0 */ +#define MDCAS01 0x08 /* CAS waveform rotate reg 1 bank */ +#define MDCAS02 0x0C /* CAS waveform rotate reg 2 bank */ +#define MDREFR 0x1C /* DRAM refresh control reg */ +#define MDCAS20 0x20 /* CAS waveform rotate reg 0 bank */ +#define MDCAS21 0x24 /* CAS waveform rotate reg 1 bank */ +#define MDCAS22 0x28 /* CAS waveform rotate reg 2 bank */ +#define MECR 0x18 /* Expansion memory (PCMCIA) bus configuration register */ +#define MSC0 0x10 /* static memory control reg 0 */ +#define MSC1 0x14 /* static memory control reg 1 */ +#define MSC2 0x2C /* static memory control reg 2 */ +#define SMCNFG 0x30 /* SMROM configuration reg */ + +mdcas00: .long 0x5555557F +mdcas01: .long 0x55555555 +mdcas02: .long 0x55555555 +mdcas20: .long 0x5555557F +mdcas21: .long 0x55555555 +mdcas22: .long 0x55555555 +mdcnfg: .long 0x0000B25C +mdrefr: .long 0x007000C1 +mecr: .long 0x10841084 +msc0: .long 0x00004774 +msc1: .long 0x00000000 +msc2: .long 0x00000000 +smcnfg: .long 0x00000000 + +/* setting up the memory */ + +.globl lowlevel_init +lowlevel_init: + + ldr r0, MEM_BASE + + /* Set up the DRAM */ + + /* MDCAS00 */ + ldr r1, mdcas00 + str r1, [r0, #MDCAS00] + + /* MDCAS01 */ + ldr r1, mdcas01 + str r1, [r0, #MDCAS01] + + /* MDCAS02 */ + ldr r1, mdcas02 + str r1, [r0, #MDCAS02] + + /* MDCAS20 */ + ldr r1, mdcas20 + str r1, [r0, #MDCAS20] + + /* MDCAS21 */ + ldr r1, mdcas21 + str r1, [r0, #MDCAS21] + + /* MDCAS22 */ + ldr r1, mdcas22 + str r1, [r0, #MDCAS22] + + /* MDREFR */ + ldr r1, mdrefr + str r1, [r0, #MDREFR] + + /* Set up PCMCIA space */ + ldr r1, mecr + str r1, [r0, #MECR] + + /* Setup the flash memory and other */ + ldr r1, msc0 + str r1, [r0, #MSC0] + + ldr r1, msc1 + str r1, [r0, #MSC1] + + ldr r1, msc2 + str r1, [r0, #MSC2] + + ldr r1, smcnfg + str r1, [r0, #SMCNFG] + + /* MDCNFG */ + ldr r1, mdcnfg + bic r1, r1, #0x00000001 + str r1, [r0, #MDCNFG] + + /* Load something to activate bank */ + ldr r2, MEM_START +.rept 8 + ldr r1, [r2] +.endr + + /* MDCNFG */ + ldr r1, mdcnfg + orr r1, r1, #0x00000001 + str r1, [r0, #MDCNFG] + + /* everything is fine now */ + mov pc, lr diff --git a/board/dnp1110/memsetup.S b/board/dnp1110/memsetup.S deleted file mode 100644 index 1622aea504..0000000000 --- a/board/dnp1110/memsetup.S +++ /dev/null @@ -1,135 +0,0 @@ -/* - * Memory Setup stuff - taken from blob memsetup.S - * - * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and - * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - -#include "config.h" -#include "version.h" - - -/* some parameters for the board */ - -MEM_BASE: .long 0xa0000000 -MEM_START: .long 0xc0000000 - -#define MDCNFG 0x00 -#define MDCAS00 0x04 /* CAS waveform rotate reg 0 */ -#define MDCAS01 0x08 /* CAS waveform rotate reg 1 bank */ -#define MDCAS02 0x0C /* CAS waveform rotate reg 2 bank */ -#define MDREFR 0x1C /* DRAM refresh control reg */ -#define MDCAS20 0x20 /* CAS waveform rotate reg 0 bank */ -#define MDCAS21 0x24 /* CAS waveform rotate reg 1 bank */ -#define MDCAS22 0x28 /* CAS waveform rotate reg 2 bank */ -#define MECR 0x18 /* Expansion memory (PCMCIA) bus configuration register */ -#define MSC0 0x10 /* static memory control reg 0 */ -#define MSC1 0x14 /* static memory control reg 1 */ -#define MSC2 0x2C /* static memory control reg 2 */ -#define SMCNFG 0x30 /* SMROM configuration reg */ - -mdcas00: .long 0x5555557F -mdcas01: .long 0x55555555 -mdcas02: .long 0x55555555 -mdcas20: .long 0x5555557F -mdcas21: .long 0x55555555 -mdcas22: .long 0x55555555 -mdcnfg: .long 0x0000B25C -mdrefr: .long 0x007000C1 -mecr: .long 0x10841084 -msc0: .long 0x00004774 -msc1: .long 0x00000000 -msc2: .long 0x00000000 -smcnfg: .long 0x00000000 - -/* setting up the memory */ - -.globl memsetup -memsetup: - - ldr r0, MEM_BASE - - /* Set up the DRAM */ - - /* MDCAS00 */ - ldr r1, mdcas00 - str r1, [r0, #MDCAS00] - - /* MDCAS01 */ - ldr r1, mdcas01 - str r1, [r0, #MDCAS01] - - /* MDCAS02 */ - ldr r1, mdcas02 - str r1, [r0, #MDCAS02] - - /* MDCAS20 */ - ldr r1, mdcas20 - str r1, [r0, #MDCAS20] - - /* MDCAS21 */ - ldr r1, mdcas21 - str r1, [r0, #MDCAS21] - - /* MDCAS22 */ - ldr r1, mdcas22 - str r1, [r0, #MDCAS22] - - /* MDREFR */ - ldr r1, mdrefr - str r1, [r0, #MDREFR] - - /* Set up PCMCIA space */ - ldr r1, mecr - str r1, [r0, #MECR] - - /* Setup the flash memory and other */ - ldr r1, msc0 - str r1, [r0, #MSC0] - - ldr r1, msc1 - str r1, [r0, #MSC1] - - ldr r1, msc2 - str r1, [r0, #MSC2] - - ldr r1, smcnfg - str r1, [r0, #SMCNFG] - - /* MDCNFG */ - ldr r1, mdcnfg - bic r1, r1, #0x00000001 - str r1, [r0, #MDCNFG] - - /* Load something to activate bank */ - ldr r2, MEM_START -.rept 8 - ldr r1, [r2] -.endr - - /* MDCNFG */ - ldr r1, mdcnfg - orr r1, r1, #0x00000001 - str r1, [r0, #MDCNFG] - - /* everything is fine now */ - mov pc, lr diff --git a/board/ep7312/Makefile b/board/ep7312/Makefile index 2b4c975b8e..c53a3c7a0d 100644 --- a/board/ep7312/Makefile +++ b/board/ep7312/Makefile @@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := ep7312.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/ep7312/lowlevel_init.S b/board/ep7312/lowlevel_init.S new file mode 100644 index 0000000000..5dadb313b1 --- /dev/null +++ b/board/ep7312/lowlevel_init.S @@ -0,0 +1,95 @@ +/* + * Memory Setup stuff - taken from ??? + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include +#include + + +/* some parameters for the board */ + +SYSCON1: .long 0x80000100 +SYSCON2: .long 0x80001100 +SYSCON3: .long 0x80002200 +MEMCFG1: .long 0x80000180 +MEMCFG2: .long 0x800001C0 +SDCONF: .long 0x80002300 +SDRFPR: .long 0x80002340 + +syscon1_val: .long 0x00040100 +syscon2_val: .long 0x00000102 +syscon3_val: .long 0x0000020E +memcfg1_val: .long 0x1f101710 +memcfg2_mask: .long 0x0000ffff @ only set lower 16 bits +memcfg2_val: .long 0x00001f13 @ upper 16 bits are reserved for CS7 + CS6 +sdrfpr_val: .long 0x00000240 +sdconf_val: .long 0x00000522 +/* setting up the memory */ + +.globl lowlevel_init +lowlevel_init: + /* + * SYSCON1-3 + */ + ldr r0, SYSCON1 + ldr r1, syscon1_val + str r1, [r0] + + ldr r0, SYSCON2 + ldr r1, syscon2_val + str r1, [r0] + + ldr r0, SYSCON3 + ldr r1, syscon3_val + str r1, [r0] + + /* + * MEMCFG1 + */ + ldr r0, MEMCFG1 + ldr r1, memcfg1_val + str r1, [r0] + + /* + * MEMCFG2 + */ + ldr r0, MEMCFG2 + ldr r2, [r0] + ldr r1, memcfg2_mask + bic r2, r2, r1 + ldr r1, memcfg2_val + orr r2, r2, r1 + str r2, [r0] + + /* + * SDRFPR,SDCONF + */ + ldr r0, SDCONF + ldr r1, sdconf_val + str r1, [r0] + + ldr r0, SDRFPR + ldr r1, sdrfpr_val + str r1, [r0] + + /* everything is fine now */ + mov pc, lr diff --git a/board/ep7312/memsetup.S b/board/ep7312/memsetup.S deleted file mode 100644 index 6078937b4c..0000000000 --- a/board/ep7312/memsetup.S +++ /dev/null @@ -1,95 +0,0 @@ -/* - * Memory Setup stuff - taken from ??? - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - -#include -#include - - -/* some parameters for the board */ - -SYSCON1: .long 0x80000100 -SYSCON2: .long 0x80001100 -SYSCON3: .long 0x80002200 -MEMCFG1: .long 0x80000180 -MEMCFG2: .long 0x800001C0 -SDCONF: .long 0x80002300 -SDRFPR: .long 0x80002340 - -syscon1_val: .long 0x00040100 -syscon2_val: .long 0x00000102 -syscon3_val: .long 0x0000020E -memcfg1_val: .long 0x1f101710 -memcfg2_mask: .long 0x0000ffff @ only set lower 16 bits -memcfg2_val: .long 0x00001f13 @ upper 16 bits are reserved for CS7 + CS6 -sdrfpr_val: .long 0x00000240 -sdconf_val: .long 0x00000522 -/* setting up the memory */ - -.globl memsetup -memsetup: - /* - * SYSCON1-3 - */ - ldr r0, SYSCON1 - ldr r1, syscon1_val - str r1, [r0] - - ldr r0, SYSCON2 - ldr r1, syscon2_val - str r1, [r0] - - ldr r0, SYSCON3 - ldr r1, syscon3_val - str r1, [r0] - - /* - * MEMCFG1 - */ - ldr r0, MEMCFG1 - ldr r1, memcfg1_val - str r1, [r0] - - /* - * MEMCFG2 - */ - ldr r0, MEMCFG2 - ldr r2, [r0] - ldr r1, memcfg2_mask - bic r2, r2, r1 - ldr r1, memcfg2_val - orr r2, r2, r1 - str r2, [r0] - - /* - * SDRFPR,SDCONF - */ - ldr r0, SDCONF - ldr r1, sdconf_val - str r1, [r0] - - ldr r0, SDRFPR - ldr r1, sdrfpr_val - str r1, [r0] - - /* everything is fine now */ - mov pc, lr diff --git a/board/evb4510/Makefile b/board/evb4510/Makefile index 1ab4dfb368..10850a95e4 100644 --- a/board/evb4510/Makefile +++ b/board/evb4510/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := evb4510.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $^ diff --git a/board/evb4510/lowlevel_init.S b/board/evb4510/lowlevel_init.S new file mode 100644 index 0000000000..7184d7259a --- /dev/null +++ b/board/evb4510/lowlevel_init.S @@ -0,0 +1,157 @@ +/* + * Copyright (c) 2004 Cucy Systems (http://www.cucy.com) + * Curt Brune + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include +#include +#include + +/*********************************************************************** + * Configure Memory Map + * + * This memory map allows us to relocate from FLASH to SRAM. After + * power-on reset the CPU only knows about the FLASH memory at address + * 0x00000000. After lowlevel_init completes the memory map will be: + * + * Memory Addr + * 0x00000000 + * to 8MB SRAM (U5) -- 8MB Map + * 0x00800000 + * + * 0x01000000 + * to 2MB Flash @ 0x00000000 (U7) -- 2MB Map + * 0x01200000 + * + * 0x02000000 + * to 512KB Flash @ 0x02000000 (U9) -- 2MB Map + * 0x02080000 + * + * Load all 12 memory registers with the STMIA instruction since + * memory access is disabled once these registers are written. The + * last register written re-enables memory access. For more info see + * the user's manual for the S3C4510B, available from Samsung's web + * site. Search for part number "S3C4510B". + * + ***********************************************************************/ + +.globl lowlevel_init +lowlevel_init: + + /* preserve the temp register (r12 AKA ip) and remap it. */ + ldr r1, =SRAM_BASE+0xC + add r0, r12, #0x01000000 + str r0, [r1] + + /* remap the link register for when we return */ + add lr, lr, #0x01000000 + + /* store a short program in the on chip SRAM, which is + * unaffected when remapping memory. Note the cache must be + * disabled for the on chip SRAM to be available. + */ + ldr r1, =SRAM_BASE + ldr r0, =0xe8801ffe /* stmia r0, {r1-r12} */ + str r0, [r1] + add r1, r1, #4 + ldr r0, =0xe59fc000 /* ldr r12, [pc, #0] */ + str r0, [r1] + add r1, r1, #4 + ldr r0, =0xe1a0f00e /* mov pc, lr */ + str r0, [r1] + + adr r0, memory_map_data + ldmia r0, {r1-r12} + ldr r0, =REG_EXTDBWTH + + ldr pc, =SRAM_BASE + +.globl reset_cpu +reset_cpu: + /* + * reset the cpu by re-mapping FLASH 0 to 0x0 and jumping to + * address 0x0. We accomplish this by storing a few + * instructions into the on chip SRAM (8KB) and run from + * there. Note the cache must be disabled for the on chip + * SRAM to be available. + * + * load r2 with REG_ROMCON0 + * load r3 with 0x12040060 configure FLASH bank 0 @ 0x00000000 + * load r4 with REG_DRAMCON0 + * load r5 with 0x08000380 configure RAM bank 0 @ 0x01000000 + * load r6 with REG_REFEXTCON + * load r7 with 0x9c218360 + * load r8 with 0x0 + * store str r3,[r2] @ SRAM_BASE + * store str r5,[r4] @ SRAM_BASE + 0x4 + * store str r7,[r6] @ SRAM_BASE + 0x8 + * store mov pc,r8 @ SRAM_BASE + 0xC + * mov pc, SRAM_BASE + * + */ + + /* disable cache */ + ldr r0, =REG_SYSCFG + ldr r1, =0x83ffffa0 /* cache-disabled */ + str r1, [r0] + + ldr r2, =REG_ROMCON0 + ldr r3, =0x02000060 /* Bank0 2MB FLASH @ 0x00000000 */ + ldr r4, =REG_DRAMCON0 + ldr r5, =0x18040380 /* DRAM0 8MB SRAM @ 0x01000000 */ + ldr r6, =REG_REFEXTCON + ldr r7, =0xce278360 + ldr r8, =0x00000000 + ldr r1, =SRAM_BASE + ldr r0, =0xe5823000 /* str r3, [r2] */ + str r0, [r1] + ldr r1, =SRAM_BASE+4 + ldr r0, =0xe5845000 /* str r5, [r4] */ + str r0, [r1] + ldr r1, =SRAM_BASE+8 + ldr r0, =0xe5867000 /* str r7, [r6] */ + str r0, [r1] + ldr r1, =SRAM_BASE+0xC + ldr r0, =0xe1a0f008 /* mov pc, r8 */ + str r0, [r1] + ldr r1, =SRAM_BASE + mov pc, r1 + + /* never return */ + +/************************************************************************ + * Below are twelve 32-bit values for the twelve memory registers of + * the system manager, starting with register REG_EXTDBWTH. + ***********************************************************************/ +memory_map_data: + .long 0x00f03005 /* memory widths */ + .long 0x12040060 /* Bank0 2MB FLASH @ 0x01000000 */ + .long 0x22080060 /* Bank1 512KB FLASH @ 0x02000000 */ + .long 0x00000000 + .long 0x00000000 + .long 0x00000000 + .long 0x00000000 + .long 0x08000380 /* DRAM0 8MB SRAM @ 0x00000000 */ + .long 0x00000000 + .long 0x00000000 + .long 0x00000000 + .long 0x9c218360 /* enable memory */ diff --git a/board/evb4510/memsetup.S b/board/evb4510/memsetup.S deleted file mode 100644 index 915af1e9e6..0000000000 --- a/board/evb4510/memsetup.S +++ /dev/null @@ -1,157 +0,0 @@ -/* - * Copyright (c) 2004 Cucy Systems (http://www.cucy.com) - * Curt Brune - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - -#include -#include -#include - -/*********************************************************************** - * Configure Memory Map - * - * This memory map allows us to relocate from FLASH to SRAM. After - * power-on reset the CPU only knows about the FLASH memory at address - * 0x00000000. After memsetup completes the memory map will be: - * - * Memory Addr - * 0x00000000 - * to 8MB SRAM (U5) -- 8MB Map - * 0x00800000 - * - * 0x01000000 - * to 2MB Flash @ 0x00000000 (U7) -- 2MB Map - * 0x01200000 - * - * 0x02000000 - * to 512KB Flash @ 0x02000000 (U9) -- 2MB Map - * 0x02080000 - * - * Load all 12 memory registers with the STMIA instruction since - * memory access is disabled once these registers are written. The - * last register written re-enables memory access. For more info see - * the user's manual for the S3C4510B, available from Samsung's web - * site. Search for part number "S3C4510B". - * - ***********************************************************************/ - -.globl memsetup -memsetup: - - /* preserve the temp register (r12 AKA ip) and remap it. */ - ldr r1, =SRAM_BASE+0xC - add r0, r12, #0x01000000 - str r0, [r1] - - /* remap the link register for when we return */ - add lr, lr, #0x01000000 - - /* store a short program in the on chip SRAM, which is - * unaffected when remapping memory. Note the cache must be - * disabled for the on chip SRAM to be available. - */ - ldr r1, =SRAM_BASE - ldr r0, =0xe8801ffe /* stmia r0, {r1-r12} */ - str r0, [r1] - add r1, r1, #4 - ldr r0, =0xe59fc000 /* ldr r12, [pc, #0] */ - str r0, [r1] - add r1, r1, #4 - ldr r0, =0xe1a0f00e /* mov pc, lr */ - str r0, [r1] - - adr r0, memory_map_data - ldmia r0, {r1-r12} - ldr r0, =REG_EXTDBWTH - - ldr pc, =SRAM_BASE - -.globl reset_cpu -reset_cpu: - /* - * reset the cpu by re-mapping FLASH 0 to 0x0 and jumping to - * address 0x0. We accomplish this by storing a few - * instructions into the on chip SRAM (8KB) and run from - * there. Note the cache must be disabled for the on chip - * SRAM to be available. - * - * load r2 with REG_ROMCON0 - * load r3 with 0x12040060 configure FLASH bank 0 @ 0x00000000 - * load r4 with REG_DRAMCON0 - * load r5 with 0x08000380 configure RAM bank 0 @ 0x01000000 - * load r6 with REG_REFEXTCON - * load r7 with 0x9c218360 - * load r8 with 0x0 - * store str r3,[r2] @ SRAM_BASE - * store str r5,[r4] @ SRAM_BASE + 0x4 - * store str r7,[r6] @ SRAM_BASE + 0x8 - * store mov pc,r8 @ SRAM_BASE + 0xC - * mov pc, SRAM_BASE - * - */ - - /* disable cache */ - ldr r0, =REG_SYSCFG - ldr r1, =0x83ffffa0 /* cache-disabled */ - str r1, [r0] - - ldr r2, =REG_ROMCON0 - ldr r3, =0x02000060 /* Bank0 2MB FLASH @ 0x00000000 */ - ldr r4, =REG_DRAMCON0 - ldr r5, =0x18040380 /* DRAM0 8MB SRAM @ 0x01000000 */ - ldr r6, =REG_REFEXTCON - ldr r7, =0xce278360 - ldr r8, =0x00000000 - ldr r1, =SRAM_BASE - ldr r0, =0xe5823000 /* str r3, [r2] */ - str r0, [r1] - ldr r1, =SRAM_BASE+4 - ldr r0, =0xe5845000 /* str r5, [r4] */ - str r0, [r1] - ldr r1, =SRAM_BASE+8 - ldr r0, =0xe5867000 /* str r7, [r6] */ - str r0, [r1] - ldr r1, =SRAM_BASE+0xC - ldr r0, =0xe1a0f008 /* mov pc, r8 */ - str r0, [r1] - ldr r1, =SRAM_BASE - mov pc, r1 - - /* never return */ - -/************************************************************************ - * Below are twelve 32-bit values for the twelve memory registers of - * the system manager, starting with register REG_EXTDBWTH. - ***********************************************************************/ -memory_map_data: - .long 0x00f03005 /* memory widths */ - .long 0x12040060 /* Bank0 2MB FLASH @ 0x01000000 */ - .long 0x22080060 /* Bank1 512KB FLASH @ 0x02000000 */ - .long 0x00000000 - .long 0x00000000 - .long 0x00000000 - .long 0x00000000 - .long 0x08000380 /* DRAM0 8MB SRAM @ 0x00000000 */ - .long 0x00000000 - .long 0x00000000 - .long 0x00000000 - .long 0x9c218360 /* enable memory */ diff --git a/board/gcplus/Makefile b/board/gcplus/Makefile index d0f7d1cffa..1954d661c3 100644 --- a/board/gcplus/Makefile +++ b/board/gcplus/Makefile @@ -28,7 +28,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := gcplus.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/gcplus/lowlevel_init.S b/board/gcplus/lowlevel_init.S new file mode 100644 index 0000000000..f292c4d28a --- /dev/null +++ b/board/gcplus/lowlevel_init.S @@ -0,0 +1,77 @@ +/* + * Memory Setup stuff - taken from blob memsetup.S + * + * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and + * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) + * 2003-2004 (c) MontaVista Software, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include "config.h" +#include "version.h" + + + .globl lowlevel_init +lowlevel_init: + /* The ADS GC+ for Linux Boot Rom Ver. 1.73 does memory init for us. + * However the darn thing leaves the MMU enabled before handing control + * over to us. So we need to disable the MMU and we use lowlevel_init + * to do it. + */ + +@ The following code segment was borrowed with gratitude from: +@ linux-2.4.19-rmk7/arch/arm/boot/compressed/head-sa1100.S + + @ Data cache might be active. + @ Be sure to flush kernel binary out of the cache, + @ whatever state it is, before it is turned off. + @ This is done by fetching through currently executed + @ memory to be sure we hit the same cache. + bic r2, pc, #0x1f + add r3, r2, #0x4000 @ 16 kb is quite enough... +1: ldr r0, [r2], #32 + teq r2, r3 + bne 1b + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mcr p15, 0, r0, c7, c7, 0 @ flush I & D caches + + @ disabling MMU and caches + mrc p15, 0, r0, c1, c0, 0 @ read control reg + bic r0, r0, #0x0d @ clear WB, DC, MMU + bic r0, r0, #0x1000 @ clear Icache + mcr p15, 0, r0, c1, c0, 0 + + nop + nop + nop + nop + nop + + b 2f +2: + nop + nop + nop + nop + nop + + + mov pc, lr diff --git a/board/gcplus/memsetup.S b/board/gcplus/memsetup.S deleted file mode 100644 index 02f5685824..0000000000 --- a/board/gcplus/memsetup.S +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Memory Setup stuff - taken from blob memsetup.S - * - * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and - * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) - * 2003-2004 (c) MontaVista Software, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - -#include "config.h" -#include "version.h" - - - .globl memsetup -memsetup: - /* The ADS GC+ for Linux Boot Rom Ver. 1.73 does memory init for us. - * However the darn thing leaves the MMU enabled before handing control - * over to us. So we need to disable the MMU and we use memsetup - * to do it. - */ - -@ The following code segment was borrowed with gratitude from: -@ linux-2.4.19-rmk7/arch/arm/boot/compressed/head-sa1100.S - - @ Data cache might be active. - @ Be sure to flush kernel binary out of the cache, - @ whatever state it is, before it is turned off. - @ This is done by fetching through currently executed - @ memory to be sure we hit the same cache. - bic r2, pc, #0x1f - add r3, r2, #0x4000 @ 16 kb is quite enough... -1: ldr r0, [r2], #32 - teq r2, r3 - bne 1b - mcr p15, 0, r0, c7, c10, 4 @ drain WB - mcr p15, 0, r0, c7, c7, 0 @ flush I & D caches - - @ disabling MMU and caches - mrc p15, 0, r0, c1, c0, 0 @ read control reg - bic r0, r0, #0x0d @ clear WB, DC, MMU - bic r0, r0, #0x1000 @ clear Icache - mcr p15, 0, r0, c1, c0, 0 - - nop - nop - nop - nop - nop - - b 2f -2: - nop - nop - nop - nop - nop - - - mov pc, lr diff --git a/board/impa7/Makefile b/board/impa7/Makefile index f8323e0b97..08543f94f2 100644 --- a/board/impa7/Makefile +++ b/board/impa7/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := impa7.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/impa7/lowlevel_init.S b/board/impa7/lowlevel_init.S new file mode 100644 index 0000000000..7ce10a2019 --- /dev/null +++ b/board/impa7/lowlevel_init.S @@ -0,0 +1,85 @@ +/* + * Memory Setup stuff - taken from ??? + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include +#include + + +/* some parameters for the board */ + +SYSCON2: .long 0x80001100 +MEMCFG1: .long 0x80000180 +MEMCFG2: .long 0x800001C0 +DRFPR: .long 0x80000200 + +syscon2_mask: .long 0x00000004 +memcfg1_val: .long 0x160c1414 +memcfg2_mask: .long 0x0000ffff @ only set lower 16 bits +memcfg2_val: .long 0x00000000 @ upper 16 bits are reserved for CS7 + CS6 +drfpr_val: .long 0x00000081 +/* setting up the memory */ + +.globl lowlevel_init +lowlevel_init: + /* + * DRFPR + * 64kHz DRAM refresh + */ + ldr r0, DRFPR + ldr r1, drfpr_val + str r1, [r0] + + /* + * SYSCON2: clear bit 2, DRAM is 32 bits wide + */ + ldr r0, SYSCON2 + ldr r2, [r0] + ldr r1, syscon2_mask + bic r2, r2, r1 + str r2, [r0] + + /* + * MEMCFG1 + * Setting up Keyboard at CS3, 8 Bit, 3 Waitstates + * Setting up CS8900 (Ethernet) at CS2, 32 Bit, 5 Waitstates + * Setting up flash at CS0 and CS1, 32 Bit, 3 Waitstates + */ + ldr r0, MEMCFG1 + ldr r1, memcfg1_val + str r1, [r0] + + /* + * MEMCFG2 + * Setting up ? with 0 + * + */ + ldr r0, MEMCFG2 + ldr r2, [r0] + ldr r1, memcfg2_mask + bic r2, r2, r1 + ldr r1, memcfg2_val + orr r2, r2, r1 + str r2, [r0] + + /* everything is fine now */ + mov pc, lr diff --git a/board/impa7/memsetup.S b/board/impa7/memsetup.S deleted file mode 100644 index 5cb5fa899d..0000000000 --- a/board/impa7/memsetup.S +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Memory Setup stuff - taken from ??? - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - -#include -#include - - -/* some parameters for the board */ - -SYSCON2: .long 0x80001100 -MEMCFG1: .long 0x80000180 -MEMCFG2: .long 0x800001C0 -DRFPR: .long 0x80000200 - -syscon2_mask: .long 0x00000004 -memcfg1_val: .long 0x160c1414 -memcfg2_mask: .long 0x0000ffff @ only set lower 16 bits -memcfg2_val: .long 0x00000000 @ upper 16 bits are reserved for CS7 + CS6 -drfpr_val: .long 0x00000081 -/* setting up the memory */ - -.globl memsetup -memsetup: - /* - * DRFPR - * 64kHz DRAM refresh - */ - ldr r0, DRFPR - ldr r1, drfpr_val - str r1, [r0] - - /* - * SYSCON2: clear bit 2, DRAM is 32 bits wide - */ - ldr r0, SYSCON2 - ldr r2, [r0] - ldr r1, syscon2_mask - bic r2, r2, r1 - str r2, [r0] - - /* - * MEMCFG1 - * Setting up Keyboard at CS3, 8 Bit, 3 Waitstates - * Setting up CS8900 (Ethernet) at CS2, 32 Bit, 5 Waitstates - * Setting up flash at CS0 and CS1, 32 Bit, 3 Waitstates - */ - ldr r0, MEMCFG1 - ldr r1, memcfg1_val - str r1, [r0] - - /* - * MEMCFG2 - * Setting up ? with 0 - * - */ - ldr r0, MEMCFG2 - ldr r2, [r0] - ldr r1, memcfg2_mask - bic r2, r2, r1 - ldr r1, memcfg2_val - orr r2, r2, r1 - str r2, [r0] - - /* everything is fine now */ - mov pc, lr diff --git a/board/incaip/Makefile b/board/incaip/Makefile index d1cdc6b924..d9b0e2d258 100644 --- a/board/incaip/Makefile +++ b/board/incaip/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS = $(BOARD).o flash.o -SOBJS = memsetup.o +SOBJS = lowlevel_init.o $(LIB): .depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/incaip/lowlevel_init.S b/board/incaip/lowlevel_init.S new file mode 100644 index 0000000000..fb64ef419d --- /dev/null +++ b/board/incaip/lowlevel_init.S @@ -0,0 +1,295 @@ +/* + * Memory sub-system initialization code for INCA-IP development board. + * + * Copyright (c) 2003 Wolfgang Denk + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + + +#define EBU_MODUL_BASE 0xB8000200 +#define EBU_CLC(value) 0x0000(value) +#define EBU_CON(value) 0x0010(value) +#define EBU_ADDSEL0(value) 0x0020(value) +#define EBU_ADDSEL1(value) 0x0024(value) +#define EBU_ADDSEL2(value) 0x0028(value) +#define EBU_BUSCON0(value) 0x0060(value) +#define EBU_BUSCON1(value) 0x0064(value) +#define EBU_BUSCON2(value) 0x0068(value) + +#define MC_MODUL_BASE 0xBF800000 +#define MC_ERRCAUSE(value) 0x0100(value) +#define MC_ERRADDR(value) 0x0108(value) +#define MC_IOGP(value) 0x0800(value) +#define MC_SELFRFSH(value) 0x0A00(value) +#define MC_CTRLENA(value) 0x1000(value) +#define MC_MRSCODE(value) 0x1008(value) +#define MC_CFGDW(value) 0x1010(value) +#define MC_CFGPB0(value) 0x1018(value) +#define MC_LATENCY(value) 0x1038(value) +#define MC_TREFRESH(value) 0x1040(value) + +#define CGU_MODUL_BASE 0xBF107000 +#define CGU_PLL1CR(value) 0x0008(value) +#define CGU_DIVCR(value) 0x0010(value) +#define CGU_MUXCR(value) 0x0014(value) +#define CGU_PLL1SR(value) 0x000C(value) + + .set noreorder + + +/* + * void ebu_init(long) + * + * a0 has the clock value we are going to run at + */ + .globl ebu_init + .ent ebu_init +ebu_init: + + li t1, EBU_MODUL_BASE + li t2, 0xA0000041 + sw t2, EBU_ADDSEL0(t1) + li t2, 0xA0800041 + sw t2, EBU_ADDSEL2(t1) + li t2, 0xBE0000F1 + sw t2, EBU_ADDSEL1(t1) + + li t3, 100000000 + beq a0, t3, 1f + nop + li t3, 133000000 + beq a0, t3, 2f + nop + li t3, 150000000 + beq a0, t3, 2f + nop + b 3f + nop + + /* 100 MHz */ +1: + li t2, 0x8841417D + sw t2, EBU_BUSCON0(t1) + sw t2, EBU_BUSCON2(t1) + li t2, 0x684142BD + b 3f + sw t2, EBU_BUSCON1(t1) /* delay slot */ + + /* 133 or 150 MHz */ +2: + li t2, 0x8841417E + sw t2, EBU_BUSCON0(t1) + sw t2, EBU_BUSCON2(t1) + li t2, 0x684143FD + sw t2, EBU_BUSCON1(t1) +3: + j ra + nop + + .end ebu_init + + +/* + * void cgu_init(long) + * + * a0 has the clock value + */ + .globl cgu_init + .ent cgu_init +cgu_init: + + li t1, CGU_MODUL_BASE + + li t3, 100000000 + beq a0, t3, 1f + nop + li t3, 133000000 + beq a0, t3, 2f + nop + li t3, 150000000 + beq a0, t3, 3f + nop + b 5f + nop + + /* 100 MHz clock */ +1: + li t2, 0x80000014 + sw t2, CGU_DIVCR(t1) + li t2, 0x80000000 + sw t2, CGU_MUXCR(t1) + li t2, 0x800B0001 + b 5f + sw t2, CGU_PLL1CR(t1) /* delay slot */ + + /* 133 MHz clock */ +2: + li t2, 0x80000054 + sw t2, CGU_DIVCR(t1) + li t2, 0x80000000 + sw t2, CGU_MUXCR(t1) + li t2, 0x800B0001 + b 5f + sw t2, CGU_PLL1CR(t1) /* delay slot */ + + /* 150 MHz clock */ +3: + li t2, 0x80000017 + sw t2, CGU_DIVCR(t1) + li t2, 0xC00B0001 + sw t2, CGU_PLL1CR(t1) + li t3, 0x80000000 +4: + lw t2, CGU_PLL1SR(t1) + and t2, t2, t3 + beq t2, zero, 4b + nop + li t2, 0x80000001 + sw t2, CGU_MUXCR(t1) +5: + j ra + nop + + .end cgu_init + + +/* + * void sdram_init(long) + * + * a0 has the clock value + */ + .globl sdram_init + .ent sdram_init +sdram_init: + + li t1, MC_MODUL_BASE + +#if 0 + /* Disable memory controller before changing any of its registers */ + sw zero, MC_CTRLENA(t1) +#endif + + li t2, 100000000 + beq a0, t2, 1f + nop + li t2, 133000000 + beq a0, t2, 2f + nop + li t2, 150000000 + beq a0, t2, 3f + nop + b 5f + nop + + /* 100 MHz clock */ +1: + /* Set clock ratio (clkrat=1:1, rddel=3) */ + li t2, 0x00000003 + sw t2, MC_IOGP(t1) + + /* Set sdram refresh rate (4K/64ms @ 100MHz) */ + li t2, 0x0000061A + b 4f + sw t2, MC_TREFRESH(t1) + + /* 133 MHz clock */ +2: + /* Set clock ratio (clkrat=1:1, rddel=3) */ + li t2, 0x00000003 + sw t2, MC_IOGP(t1) + + /* Set sdram refresh rate (4K/64ms @ 133MHz) */ + li t2, 0x00000822 + b 4f + sw t2, MC_TREFRESH(t1) + + /* 150 MHz clock */ +3: + /* Set clock ratio (clkrat=3:2, rddel=4) */ + li t2, 0x00000014 + sw t2, MC_IOGP(t1) + + /* Set sdram refresh rate (4K/64ms @ 150MHz) */ + li t2, 0x00000927 + sw t2, MC_TREFRESH(t1) + +4: + /* Clear Error log registers */ + sw zero, MC_ERRCAUSE(t1) + sw zero, MC_ERRADDR(t1) + + /* Clear Power-down registers */ + sw zero, MC_SELFRFSH(t1) + + /* Set CAS Latency */ + li t2, 0x00000020 /* CL = 2 */ + sw t2, MC_MRSCODE(t1) + + /* Set word width to 16 bit */ + li t2, 0x2 + sw t2, MC_CFGDW(t1) + + /* Set CS0 to SDRAM parameters */ + li t2, 0x000014C9 + sw t2, MC_CFGPB0(t1) + + /* Set SDRAM latency parameters */ + li t2, 0x00026325 /* BC PC100 */ + sw t2, MC_LATENCY(t1) + +5: + /* Finally enable the controller */ + li t2, 0x00000001 + sw t2, MC_CTRLENA(t1) + + j ra + nop + + .end sdram_init + + + .globl lowlevel_init + .ent lowlevel_init +lowlevel_init: + + /* EBU, CGU and SDRAM Initialization. + */ + li a0, CPU_CLOCK_RATE + move t0, ra + + /* We rely on the fact that neither ebu_init() nor cgu_init() nor sdram_init() + * modify t0 and a0. + */ + bal cgu_init + nop + bal ebu_init + nop + bal sdram_init + nop + move ra, t0 + + j ra + nop + + .end lowlevel_init diff --git a/board/incaip/memsetup.S b/board/incaip/memsetup.S deleted file mode 100644 index 3f883c110a..0000000000 --- a/board/incaip/memsetup.S +++ /dev/null @@ -1,295 +0,0 @@ -/* - * Memory sub-system initialization code for INCA-IP development board. - * - * Copyright (c) 2003 Wolfgang Denk - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - - -#define EBU_MODUL_BASE 0xB8000200 -#define EBU_CLC(value) 0x0000(value) -#define EBU_CON(value) 0x0010(value) -#define EBU_ADDSEL0(value) 0x0020(value) -#define EBU_ADDSEL1(value) 0x0024(value) -#define EBU_ADDSEL2(value) 0x0028(value) -#define EBU_BUSCON0(value) 0x0060(value) -#define EBU_BUSCON1(value) 0x0064(value) -#define EBU_BUSCON2(value) 0x0068(value) - -#define MC_MODUL_BASE 0xBF800000 -#define MC_ERRCAUSE(value) 0x0100(value) -#define MC_ERRADDR(value) 0x0108(value) -#define MC_IOGP(value) 0x0800(value) -#define MC_SELFRFSH(value) 0x0A00(value) -#define MC_CTRLENA(value) 0x1000(value) -#define MC_MRSCODE(value) 0x1008(value) -#define MC_CFGDW(value) 0x1010(value) -#define MC_CFGPB0(value) 0x1018(value) -#define MC_LATENCY(value) 0x1038(value) -#define MC_TREFRESH(value) 0x1040(value) - -#define CGU_MODUL_BASE 0xBF107000 -#define CGU_PLL1CR(value) 0x0008(value) -#define CGU_DIVCR(value) 0x0010(value) -#define CGU_MUXCR(value) 0x0014(value) -#define CGU_PLL1SR(value) 0x000C(value) - - .set noreorder - - -/* - * void ebu_init(long) - * - * a0 has the clock value we are going to run at - */ - .globl ebu_init - .ent ebu_init -ebu_init: - - li t1, EBU_MODUL_BASE - li t2, 0xA0000041 - sw t2, EBU_ADDSEL0(t1) - li t2, 0xA0800041 - sw t2, EBU_ADDSEL2(t1) - li t2, 0xBE0000F1 - sw t2, EBU_ADDSEL1(t1) - - li t3, 100000000 - beq a0, t3, 1f - nop - li t3, 133000000 - beq a0, t3, 2f - nop - li t3, 150000000 - beq a0, t3, 2f - nop - b 3f - nop - - /* 100 MHz */ -1: - li t2, 0x8841417D - sw t2, EBU_BUSCON0(t1) - sw t2, EBU_BUSCON2(t1) - li t2, 0x684142BD - b 3f - sw t2, EBU_BUSCON1(t1) /* delay slot */ - - /* 133 or 150 MHz */ -2: - li t2, 0x8841417E - sw t2, EBU_BUSCON0(t1) - sw t2, EBU_BUSCON2(t1) - li t2, 0x684143FD - sw t2, EBU_BUSCON1(t1) -3: - j ra - nop - - .end ebu_init - - -/* - * void cgu_init(long) - * - * a0 has the clock value - */ - .globl cgu_init - .ent cgu_init -cgu_init: - - li t1, CGU_MODUL_BASE - - li t3, 100000000 - beq a0, t3, 1f - nop - li t3, 133000000 - beq a0, t3, 2f - nop - li t3, 150000000 - beq a0, t3, 3f - nop - b 5f - nop - - /* 100 MHz clock */ -1: - li t2, 0x80000014 - sw t2, CGU_DIVCR(t1) - li t2, 0x80000000 - sw t2, CGU_MUXCR(t1) - li t2, 0x800B0001 - b 5f - sw t2, CGU_PLL1CR(t1) /* delay slot */ - - /* 133 MHz clock */ -2: - li t2, 0x80000054 - sw t2, CGU_DIVCR(t1) - li t2, 0x80000000 - sw t2, CGU_MUXCR(t1) - li t2, 0x800B0001 - b 5f - sw t2, CGU_PLL1CR(t1) /* delay slot */ - - /* 150 MHz clock */ -3: - li t2, 0x80000017 - sw t2, CGU_DIVCR(t1) - li t2, 0xC00B0001 - sw t2, CGU_PLL1CR(t1) - li t3, 0x80000000 -4: - lw t2, CGU_PLL1SR(t1) - and t2, t2, t3 - beq t2, zero, 4b - nop - li t2, 0x80000001 - sw t2, CGU_MUXCR(t1) -5: - j ra - nop - - .end cgu_init - - -/* - * void sdram_init(long) - * - * a0 has the clock value - */ - .globl sdram_init - .ent sdram_init -sdram_init: - - li t1, MC_MODUL_BASE - -#if 0 - /* Disable memory controller before changing any of its registers */ - sw zero, MC_CTRLENA(t1) -#endif - - li t2, 100000000 - beq a0, t2, 1f - nop - li t2, 133000000 - beq a0, t2, 2f - nop - li t2, 150000000 - beq a0, t2, 3f - nop - b 5f - nop - - /* 100 MHz clock */ -1: - /* Set clock ratio (clkrat=1:1, rddel=3) */ - li t2, 0x00000003 - sw t2, MC_IOGP(t1) - - /* Set sdram refresh rate (4K/64ms @ 100MHz) */ - li t2, 0x0000061A - b 4f - sw t2, MC_TREFRESH(t1) - - /* 133 MHz clock */ -2: - /* Set clock ratio (clkrat=1:1, rddel=3) */ - li t2, 0x00000003 - sw t2, MC_IOGP(t1) - - /* Set sdram refresh rate (4K/64ms @ 133MHz) */ - li t2, 0x00000822 - b 4f - sw t2, MC_TREFRESH(t1) - - /* 150 MHz clock */ -3: - /* Set clock ratio (clkrat=3:2, rddel=4) */ - li t2, 0x00000014 - sw t2, MC_IOGP(t1) - - /* Set sdram refresh rate (4K/64ms @ 150MHz) */ - li t2, 0x00000927 - sw t2, MC_TREFRESH(t1) - -4: - /* Clear Error log registers */ - sw zero, MC_ERRCAUSE(t1) - sw zero, MC_ERRADDR(t1) - - /* Clear Power-down registers */ - sw zero, MC_SELFRFSH(t1) - - /* Set CAS Latency */ - li t2, 0x00000020 /* CL = 2 */ - sw t2, MC_MRSCODE(t1) - - /* Set word width to 16 bit */ - li t2, 0x2 - sw t2, MC_CFGDW(t1) - - /* Set CS0 to SDRAM parameters */ - li t2, 0x000014C9 - sw t2, MC_CFGPB0(t1) - - /* Set SDRAM latency parameters */ - li t2, 0x00026325 /* BC PC100 */ - sw t2, MC_LATENCY(t1) - -5: - /* Finally enable the controller */ - li t2, 0x00000001 - sw t2, MC_CTRLENA(t1) - - j ra - nop - - .end sdram_init - - - .globl memsetup - .ent memsetup -memsetup: - - /* EBU, CGU and SDRAM Initialization. - */ - li a0, CPU_CLOCK_RATE - move t0, ra - - /* We rely on the fact that neither ebu_init() nor cgu_init() nor sdram_init() - * modify t0 and a0. - */ - bal cgu_init - nop - bal ebu_init - nop - bal sdram_init - nop - move ra, t0 - - j ra - nop - - .end memsetup diff --git a/board/innokom/Makefile b/board/innokom/Makefile index 59eaee58b1..73f6a74427 100644 --- a/board/innokom/Makefile +++ b/board/innokom/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := innokom.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/innokom/lowlevel_init.S b/board/innokom/lowlevel_init.S new file mode 100644 index 0000000000..aa9dcba6fc --- /dev/null +++ b/board/innokom/lowlevel_init.S @@ -0,0 +1,437 @@ +/* + * Most of this taken from Redboot hal_platform_setup.h with cleanup + * + * NOTE: I haven't clean this up considerably, just enough to get it + * running. See hal_platform_setup.h for the source. See + * board/cradle/lowlevel_init.S for another PXA250 setup that is + * much cleaner. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +DRAM_SIZE: .long CFG_DRAM_SIZE + +/* wait for coprocessor write complete */ + .macro CPWAIT reg + mrc p15,0,\reg,c2,c0,0 + mov \reg,\reg + sub pc,pc,#4 + .endm + +_TEXT_BASE: + .word TEXT_BASE + + +/* + * Memory setup + */ + +.globl lowlevel_init +lowlevel_init: + + mov r10, lr + + /* Set up GPIO pins first ----------------------------------------- */ + + ldr r0, =GPSR0 + ldr r1, =CFG_GPSR0_VAL + str r1, [r0] + + ldr r0, =GPSR1 + ldr r1, =CFG_GPSR1_VAL + str r1, [r0] + + ldr r0, =GPSR2 + ldr r1, =CFG_GPSR2_VAL + str r1, [r0] + + ldr r0, =GPCR0 + ldr r1, =CFG_GPCR0_VAL + str r1, [r0] + + ldr r0, =GPCR1 + ldr r1, =CFG_GPCR1_VAL + str r1, [r0] + + ldr r0, =GPCR2 + ldr r1, =CFG_GPCR2_VAL + str r1, [r0] + + ldr r0, =GPDR0 + ldr r1, =CFG_GPDR0_VAL + str r1, [r0] + + ldr r0, =GPDR1 + ldr r1, =CFG_GPDR1_VAL + str r1, [r0] + + ldr r0, =GPDR2 + ldr r1, =CFG_GPDR2_VAL + str r1, [r0] + + ldr r0, =GAFR0_L + ldr r1, =CFG_GAFR0_L_VAL + str r1, [r0] + + ldr r0, =GAFR0_U + ldr r1, =CFG_GAFR0_U_VAL + str r1, [r0] + + ldr r0, =GAFR1_L + ldr r1, =CFG_GAFR1_L_VAL + str r1, [r0] + + ldr r0, =GAFR1_U + ldr r1, =CFG_GAFR1_U_VAL + str r1, [r0] + + ldr r0, =GAFR2_L + ldr r1, =CFG_GAFR2_L_VAL + str r1, [r0] + + ldr r0, =GAFR2_U + ldr r1, =CFG_GAFR2_U_VAL + str r1, [r0] + + ldr r0, =PSSR /* enable GPIO pins */ + ldr r1, =CFG_PSSR_VAL + str r1, [r0] + +/* ldr r3, =MSC1 / low - bank 2 Lubbock Registers / SRAM */ +/* ldr r2, =CFG_MSC1_VAL / high - bank 3 Ethernet Controller */ +/* str r2, [r3] / need to set MSC1 before trying to write to the HEX LEDs */ +/* ldr r2, [r3] / need to read it back to make sure the value latches (see MSC section of manual) */ +/* */ +/* ldr r1, =LED_BLANK */ +/* mov r0, #0xFF */ +/* str r0, [r1] / turn on hex leds */ +/* */ +/*loop: */ +/* */ +/* ldr r0, =0xB0070001 */ +/* ldr r1, =_LED */ +/* str r0, [r1] / hex display */ + + + /* ---------------------------------------------------------------- */ + /* Enable memory interface */ + /* */ + /* The sequence below is based on the recommended init steps */ + /* detailed in the Intel PXA250 Operating Systems Developers Guide, */ + /* Chapter 10. */ + /* ---------------------------------------------------------------- */ + + /* ---------------------------------------------------------------- */ + /* Step 1: Wait for at least 200 microsedonds to allow internal */ + /* clocks to settle. Only necessary after hard reset... */ + /* FIXME: can be optimized later */ + /* ---------------------------------------------------------------- */ + + ldr r3, =OSCR /* reset the OS Timer Count to zero */ + mov r2, #0 + str r2, [r3] + ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ + /* so 0x300 should be plenty */ +1: + ldr r2, [r3] + cmp r4, r2 + bgt 1b + +mem_init: + + ldr r1, =MEMC_BASE /* get memory controller base addr. */ + + /* ---------------------------------------------------------------- */ + /* Step 2a: Initialize Asynchronous static memory controller */ + /* ---------------------------------------------------------------- */ + + /* MSC registers: timing, bus width, mem type */ + + /* MSC0: nCS(0,1) */ + ldr r2, =CFG_MSC0_VAL + str r2, [r1, #MSC0_OFFSET] + ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */ + /* that data latches */ + /* MSC1: nCS(2,3) */ + ldr r2, =CFG_MSC1_VAL + str r2, [r1, #MSC1_OFFSET] + ldr r2, [r1, #MSC1_OFFSET] + + /* MSC2: nCS(4,5) */ + ldr r2, =CFG_MSC2_VAL + str r2, [r1, #MSC2_OFFSET] + ldr r2, [r1, #MSC2_OFFSET] + + /* ---------------------------------------------------------------- */ + /* Step 2b: Initialize Card Interface */ + /* ---------------------------------------------------------------- */ + + /* MECR: Memory Expansion Card Register */ + ldr r2, =CFG_MECR_VAL + str r2, [r1, #MECR_OFFSET] + ldr r2, [r1, #MECR_OFFSET] + + /* MCMEM0: Card Interface slot 0 timing */ + ldr r2, =CFG_MCMEM0_VAL + str r2, [r1, #MCMEM0_OFFSET] + ldr r2, [r1, #MCMEM0_OFFSET] + + /* MCMEM1: Card Interface slot 1 timing */ + ldr r2, =CFG_MCMEM1_VAL + str r2, [r1, #MCMEM1_OFFSET] + ldr r2, [r1, #MCMEM1_OFFSET] + + /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ + ldr r2, =CFG_MCATT0_VAL + str r2, [r1, #MCATT0_OFFSET] + ldr r2, [r1, #MCATT0_OFFSET] + + /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ + ldr r2, =CFG_MCATT1_VAL + str r2, [r1, #MCATT1_OFFSET] + ldr r2, [r1, #MCATT1_OFFSET] + + /* MCIO0: Card Interface I/O Space Timing, slot 0 */ + ldr r2, =CFG_MCIO0_VAL + str r2, [r1, #MCIO0_OFFSET] + ldr r2, [r1, #MCIO0_OFFSET] + + /* MCIO1: Card Interface I/O Space Timing, slot 1 */ + ldr r2, =CFG_MCIO1_VAL + str r2, [r1, #MCIO1_OFFSET] + ldr r2, [r1, #MCIO1_OFFSET] + + /* ---------------------------------------------------------------- */ + /* Step 2c: Write FLYCNFG FIXME: what's that??? */ + /* ---------------------------------------------------------------- */ + + /* test if we run from flash or RAM - RAM/BDI: don't setup RAM */ + adr r3, mem_init /* r0 <- current position of code */ + ldr r2, =mem_init + cmp r3, r2 /* skip init if in place */ + beq initirqs + + + /* ---------------------------------------------------------------- */ + /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */ + /* ---------------------------------------------------------------- */ + + /* Before accessing MDREFR we need a valid DRI field, so we set */ + /* this to power on defaults + DRI field. */ + + ldr r3, =CFG_MDREFR_VAL + ldr r2, =0xFFF + and r3, r3, r2 + ldr r4, =0x03ca4000 + orr r4, r4, r3 + + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r4, [r1, #MDREFR_OFFSET] + + + /* ---------------------------------------------------------------- */ + /* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */ + /* ---------------------------------------------------------------- */ + + /* Initialize SXCNFG register. Assert the enable bits */ + + /* Write SXMRS to cause an MRS command to all enabled banks of */ + /* synchronous static memory. Note that SXLCR need not be written */ + /* at this time. */ + + /* FIXME: we use async mode for now */ + + + /* ---------------------------------------------------------------- */ + /* Step 4: Initialize SDRAM */ + /* ---------------------------------------------------------------- */ + + /* Step 4a: assert MDREFR:K?RUN and configure */ + /* MDREFR:K1DB2 and MDREFR:K2DB2 as desired. */ + + ldr r4, =CFG_MDREFR_VAL + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r4, [r1, #MDREFR_OFFSET] + + /* Step 4b: de-assert MDREFR:SLFRSH. */ + + bic r4, r4, #(MDREFR_SLFRSH) + + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r4, [r1, #MDREFR_OFFSET] + + + /* Step 4c: assert MDREFR:E1PIN and E0PIO */ + + orr r4, r4, #(MDREFR_E1PIN|MDREFR_E0PIN) + + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r4, [r1, #MDREFR_OFFSET] + + + /* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */ + /* configure but not enable each SDRAM partition pair. */ + + ldr r4, =CFG_MDCNFG_VAL + bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1) + + str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */ + ldr r4, [r1, #MDCNFG_OFFSET] + + + /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */ + /* 100..200 µsec. */ + + ldr r3, =OSCR /* reset the OS Timer Count to zero */ + mov r2, #0 + str r2, [r3] + ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ + /* so 0x300 should be plenty */ +1: + ldr r2, [r3] + cmp r4, r2 + bgt 1b + + + /* Step 4f: Trigger a number (usually 8) refresh cycles by */ + /* attempting non-burst read or write accesses to disabled */ + /* SDRAM, as commonly specified in the power up sequence */ + /* documented in SDRAM data sheets. The address(es) used */ + /* for this purpose must not be cacheable. */ + + /* There should 9 writes, since the first write doesn't */ + /* trigger a refresh cycle on PXA250. See Intel PXA250 and */ + /* PXA210 Processors Specification Update, */ + /* Jan 2003, Errata #116, page 30. */ + + + ldr r3, =CFG_DRAM_BASE + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + + /* Step 4g: Write MDCNFG with enable bits asserted */ + /* (MDCNFG:DEx set to 1). */ + + ldr r3, [r1, #MDCNFG_OFFSET] + orr r3, r3, #(MDCNFG_DE0|MDCNFG_DE1) + str r3, [r1, #MDCNFG_OFFSET] + + /* Step 4h: Write MDMRS. */ + + ldr r2, =CFG_MDMRS_VAL + str r2, [r1, #MDMRS_OFFSET] + + + /* We are finished with Intel's memory controller initialisation */ + + /* ---------------------------------------------------------------- */ + /* Disable (mask) all interrupts at interrupt controller */ + /* ---------------------------------------------------------------- */ + +initirqs: + + mov r1, #0 /* clear int. level register (IRQ, not FIQ) */ + ldr r2, =ICLR + str r1, [r2] + + ldr r2, =ICMR /* mask all interrupts at the controller */ + str r1, [r2] + + + /* ---------------------------------------------------------------- */ + /* Clock initialisation */ + /* ---------------------------------------------------------------- */ + +initclks: + + /* Disable the peripheral clocks, and set the core clock frequency */ + /* (hard-coding at 398.12MHz for now). */ + + /* Turn Off ALL on-chip peripheral clocks for re-configuration */ + /* Note: See label 'ENABLECLKS' for the re-enabling */ + ldr r1, =CKEN + mov r2, #0 + str r2, [r1] + + + /* default value in case no valid rotary switch setting is found */ + ldr r2, =(CCCR_L27|CCCR_M2|CCCR_N10) /* DEFAULT: {200/200/100} */ + + /* ... and write the core clock config register */ + ldr r1, =CCCR + str r2, [r1] + + /* enable the 32Khz oscillator for RTC and PowerManager */ +/* + ldr r1, =OSCC + mov r2, #OSCC_OON + str r2, [r1] +*/ + /* NOTE: spin here until OSCC.OOK get set, meaning the PLL */ + /* has settled. */ +60: + ldr r2, [r1] + ands r2, r2, #1 + beq 60b + + /* ---------------------------------------------------------------- */ + /* */ + /* ---------------------------------------------------------------- */ + + /* Save SDRAM size */ + ldr r1, =DRAM_SIZE + str r8, [r1] + + /* Interrupt init: Mask all interrupts */ + ldr r0, =ICMR /* enable no sources */ + mov r1, #0 + str r1, [r0] + + /* FIXME */ + +#ifndef DEBUG + /*Disable software and data breakpoints */ + mov r0,#0 + mcr p15,0,r0,c14,c8,0 /* ibcr0 */ + mcr p15,0,r0,c14,c9,0 /* ibcr1 */ + mcr p15,0,r0,c14,c4,0 /* dbcon */ + + /*Enable all debug functionality */ + mov r0,#0x80000000 + mcr p14,0,r0,c10,c0,0 /* dcsr */ +#endif + + /* ---------------------------------------------------------------- */ + /* End lowlevel_init */ + /* ---------------------------------------------------------------- */ + +endlowlevel_init: + + mov pc, lr diff --git a/board/innokom/memsetup.S b/board/innokom/memsetup.S deleted file mode 100644 index 68577ca069..0000000000 --- a/board/innokom/memsetup.S +++ /dev/null @@ -1,437 +0,0 @@ -/* - * Most of this taken from Redboot hal_platform_setup.h with cleanup - * - * NOTE: I haven't clean this up considerably, just enough to get it - * running. See hal_platform_setup.h for the source. See - * board/cradle/memsetup.S for another PXA250 setup that is - * much cleaner. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -DRAM_SIZE: .long CFG_DRAM_SIZE - -/* wait for coprocessor write complete */ - .macro CPWAIT reg - mrc p15,0,\reg,c2,c0,0 - mov \reg,\reg - sub pc,pc,#4 - .endm - -_TEXT_BASE: - .word TEXT_BASE - - -/* - * Memory setup - */ - -.globl memsetup -memsetup: - - mov r10, lr - - /* Set up GPIO pins first ----------------------------------------- */ - - ldr r0, =GPSR0 - ldr r1, =CFG_GPSR0_VAL - str r1, [r0] - - ldr r0, =GPSR1 - ldr r1, =CFG_GPSR1_VAL - str r1, [r0] - - ldr r0, =GPSR2 - ldr r1, =CFG_GPSR2_VAL - str r1, [r0] - - ldr r0, =GPCR0 - ldr r1, =CFG_GPCR0_VAL - str r1, [r0] - - ldr r0, =GPCR1 - ldr r1, =CFG_GPCR1_VAL - str r1, [r0] - - ldr r0, =GPCR2 - ldr r1, =CFG_GPCR2_VAL - str r1, [r0] - - ldr r0, =GPDR0 - ldr r1, =CFG_GPDR0_VAL - str r1, [r0] - - ldr r0, =GPDR1 - ldr r1, =CFG_GPDR1_VAL - str r1, [r0] - - ldr r0, =GPDR2 - ldr r1, =CFG_GPDR2_VAL - str r1, [r0] - - ldr r0, =GAFR0_L - ldr r1, =CFG_GAFR0_L_VAL - str r1, [r0] - - ldr r0, =GAFR0_U - ldr r1, =CFG_GAFR0_U_VAL - str r1, [r0] - - ldr r0, =GAFR1_L - ldr r1, =CFG_GAFR1_L_VAL - str r1, [r0] - - ldr r0, =GAFR1_U - ldr r1, =CFG_GAFR1_U_VAL - str r1, [r0] - - ldr r0, =GAFR2_L - ldr r1, =CFG_GAFR2_L_VAL - str r1, [r0] - - ldr r0, =GAFR2_U - ldr r1, =CFG_GAFR2_U_VAL - str r1, [r0] - - ldr r0, =PSSR /* enable GPIO pins */ - ldr r1, =CFG_PSSR_VAL - str r1, [r0] - -/* ldr r3, =MSC1 / low - bank 2 Lubbock Registers / SRAM */ -/* ldr r2, =CFG_MSC1_VAL / high - bank 3 Ethernet Controller */ -/* str r2, [r3] / need to set MSC1 before trying to write to the HEX LEDs */ -/* ldr r2, [r3] / need to read it back to make sure the value latches (see MSC section of manual) */ -/* */ -/* ldr r1, =LED_BLANK */ -/* mov r0, #0xFF */ -/* str r0, [r1] / turn on hex leds */ -/* */ -/*loop: */ -/* */ -/* ldr r0, =0xB0070001 */ -/* ldr r1, =_LED */ -/* str r0, [r1] / hex display */ - - - /* ---------------------------------------------------------------- */ - /* Enable memory interface */ - /* */ - /* The sequence below is based on the recommended init steps */ - /* detailed in the Intel PXA250 Operating Systems Developers Guide, */ - /* Chapter 10. */ - /* ---------------------------------------------------------------- */ - - /* ---------------------------------------------------------------- */ - /* Step 1: Wait for at least 200 microsedonds to allow internal */ - /* clocks to settle. Only necessary after hard reset... */ - /* FIXME: can be optimized later */ - /* ---------------------------------------------------------------- */ - - ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ - /* so 0x300 should be plenty */ -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - -mem_init: - - ldr r1, =MEMC_BASE /* get memory controller base addr. */ - - /* ---------------------------------------------------------------- */ - /* Step 2a: Initialize Asynchronous static memory controller */ - /* ---------------------------------------------------------------- */ - - /* MSC registers: timing, bus width, mem type */ - - /* MSC0: nCS(0,1) */ - ldr r2, =CFG_MSC0_VAL - str r2, [r1, #MSC0_OFFSET] - ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */ - /* that data latches */ - /* MSC1: nCS(2,3) */ - ldr r2, =CFG_MSC1_VAL - str r2, [r1, #MSC1_OFFSET] - ldr r2, [r1, #MSC1_OFFSET] - - /* MSC2: nCS(4,5) */ - ldr r2, =CFG_MSC2_VAL - str r2, [r1, #MSC2_OFFSET] - ldr r2, [r1, #MSC2_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 2b: Initialize Card Interface */ - /* ---------------------------------------------------------------- */ - - /* MECR: Memory Expansion Card Register */ - ldr r2, =CFG_MECR_VAL - str r2, [r1, #MECR_OFFSET] - ldr r2, [r1, #MECR_OFFSET] - - /* MCMEM0: Card Interface slot 0 timing */ - ldr r2, =CFG_MCMEM0_VAL - str r2, [r1, #MCMEM0_OFFSET] - ldr r2, [r1, #MCMEM0_OFFSET] - - /* MCMEM1: Card Interface slot 1 timing */ - ldr r2, =CFG_MCMEM1_VAL - str r2, [r1, #MCMEM1_OFFSET] - ldr r2, [r1, #MCMEM1_OFFSET] - - /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ - ldr r2, =CFG_MCATT0_VAL - str r2, [r1, #MCATT0_OFFSET] - ldr r2, [r1, #MCATT0_OFFSET] - - /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ - ldr r2, =CFG_MCATT1_VAL - str r2, [r1, #MCATT1_OFFSET] - ldr r2, [r1, #MCATT1_OFFSET] - - /* MCIO0: Card Interface I/O Space Timing, slot 0 */ - ldr r2, =CFG_MCIO0_VAL - str r2, [r1, #MCIO0_OFFSET] - ldr r2, [r1, #MCIO0_OFFSET] - - /* MCIO1: Card Interface I/O Space Timing, slot 1 */ - ldr r2, =CFG_MCIO1_VAL - str r2, [r1, #MCIO1_OFFSET] - ldr r2, [r1, #MCIO1_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 2c: Write FLYCNFG FIXME: what's that??? */ - /* ---------------------------------------------------------------- */ - - /* test if we run from flash or RAM - RAM/BDI: don't setup RAM */ - adr r3, mem_init /* r0 <- current position of code */ - ldr r2, =mem_init - cmp r3, r2 /* skip init if in place */ - beq initirqs - - - /* ---------------------------------------------------------------- */ - /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */ - /* ---------------------------------------------------------------- */ - - /* Before accessing MDREFR we need a valid DRI field, so we set */ - /* this to power on defaults + DRI field. */ - - ldr r3, =CFG_MDREFR_VAL - ldr r2, =0xFFF - and r3, r3, r2 - ldr r4, =0x03ca4000 - orr r4, r4, r3 - - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] - - - /* ---------------------------------------------------------------- */ - /* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */ - /* ---------------------------------------------------------------- */ - - /* Initialize SXCNFG register. Assert the enable bits */ - - /* Write SXMRS to cause an MRS command to all enabled banks of */ - /* synchronous static memory. Note that SXLCR need not be written */ - /* at this time. */ - - /* FIXME: we use async mode for now */ - - - /* ---------------------------------------------------------------- */ - /* Step 4: Initialize SDRAM */ - /* ---------------------------------------------------------------- */ - - /* Step 4a: assert MDREFR:K?RUN and configure */ - /* MDREFR:K1DB2 and MDREFR:K2DB2 as desired. */ - - ldr r4, =CFG_MDREFR_VAL - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] - - /* Step 4b: de-assert MDREFR:SLFRSH. */ - - bic r4, r4, #(MDREFR_SLFRSH) - - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] - - - /* Step 4c: assert MDREFR:E1PIN and E0PIO */ - - orr r4, r4, #(MDREFR_E1PIN|MDREFR_E0PIN) - - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] - - - /* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */ - /* configure but not enable each SDRAM partition pair. */ - - ldr r4, =CFG_MDCNFG_VAL - bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1) - - str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */ - ldr r4, [r1, #MDCNFG_OFFSET] - - - /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */ - /* 100..200 µsec. */ - - ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ - /* so 0x300 should be plenty */ -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - - - /* Step 4f: Trigger a number (usually 8) refresh cycles by */ - /* attempting non-burst read or write accesses to disabled */ - /* SDRAM, as commonly specified in the power up sequence */ - /* documented in SDRAM data sheets. The address(es) used */ - /* for this purpose must not be cacheable. */ - - /* There should 9 writes, since the first write doesn't */ - /* trigger a refresh cycle on PXA250. See Intel PXA250 and */ - /* PXA210 Processors Specification Update, */ - /* Jan 2003, Errata #116, page 30. */ - - - ldr r3, =CFG_DRAM_BASE - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - - /* Step 4g: Write MDCNFG with enable bits asserted */ - /* (MDCNFG:DEx set to 1). */ - - ldr r3, [r1, #MDCNFG_OFFSET] - orr r3, r3, #(MDCNFG_DE0|MDCNFG_DE1) - str r3, [r1, #MDCNFG_OFFSET] - - /* Step 4h: Write MDMRS. */ - - ldr r2, =CFG_MDMRS_VAL - str r2, [r1, #MDMRS_OFFSET] - - - /* We are finished with Intel's memory controller initialisation */ - - /* ---------------------------------------------------------------- */ - /* Disable (mask) all interrupts at interrupt controller */ - /* ---------------------------------------------------------------- */ - -initirqs: - - mov r1, #0 /* clear int. level register (IRQ, not FIQ) */ - ldr r2, =ICLR - str r1, [r2] - - ldr r2, =ICMR /* mask all interrupts at the controller */ - str r1, [r2] - - - /* ---------------------------------------------------------------- */ - /* Clock initialisation */ - /* ---------------------------------------------------------------- */ - -initclks: - - /* Disable the peripheral clocks, and set the core clock frequency */ - /* (hard-coding at 398.12MHz for now). */ - - /* Turn Off ALL on-chip peripheral clocks for re-configuration */ - /* Note: See label 'ENABLECLKS' for the re-enabling */ - ldr r1, =CKEN - mov r2, #0 - str r2, [r1] - - - /* default value in case no valid rotary switch setting is found */ - ldr r2, =(CCCR_L27|CCCR_M2|CCCR_N10) /* DEFAULT: {200/200/100} */ - - /* ... and write the core clock config register */ - ldr r1, =CCCR - str r2, [r1] - - /* enable the 32Khz oscillator for RTC and PowerManager */ -/* - ldr r1, =OSCC - mov r2, #OSCC_OON - str r2, [r1] -*/ - /* NOTE: spin here until OSCC.OOK get set, meaning the PLL */ - /* has settled. */ -60: - ldr r2, [r1] - ands r2, r2, #1 - beq 60b - - /* ---------------------------------------------------------------- */ - /* */ - /* ---------------------------------------------------------------- */ - - /* Save SDRAM size */ - ldr r1, =DRAM_SIZE - str r8, [r1] - - /* Interrupt init: Mask all interrupts */ - ldr r0, =ICMR /* enable no sources */ - mov r1, #0 - str r1, [r0] - - /* FIXME */ - -#ifndef DEBUG - /*Disable software and data breakpoints */ - mov r0,#0 - mcr p15,0,r0,c14,c8,0 /* ibcr0 */ - mcr p15,0,r0,c14,c9,0 /* ibcr1 */ - mcr p15,0,r0,c14,c4,0 /* dbcon */ - - /*Enable all debug functionality */ - mov r0,#0x80000000 - mcr p14,0,r0,c10,c0,0 /* dcsr */ -#endif - - /* ---------------------------------------------------------------- */ - /* End memsetup */ - /* ---------------------------------------------------------------- */ - -endmemsetup: - - mov pc, lr diff --git a/board/lart/Makefile b/board/lart/Makefile index 42ceb03b7a..550aa1dac3 100644 --- a/board/lart/Makefile +++ b/board/lart/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := lart.o flash.o -SOBJS := flashasm.o memsetup.o +SOBJS := flashasm.o lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/lart/lowlevel_init.S b/board/lart/lowlevel_init.S new file mode 100644 index 0000000000..db9fd63def --- /dev/null +++ b/board/lart/lowlevel_init.S @@ -0,0 +1,94 @@ +/* + * Memory Setup stuff - taken from blob memsetup.S + * + * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and + * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include +#include + + +/* some parameters for the board */ + +MEM_BASE: .long 0xa0000000 +MEM_START: .long 0xc0000000 + +#define MDCNFG 0x00 +#define MDCAS0 0x04 +#define MDCAS1 0x08 +#define MDCAS2 0x0c +#define MSC0 0x10 +#define MSC1 0x14 +#define MECR 0x18 + +mdcas0: .long 0xc71c703f +mdcas1: .long 0xffc71c71 +mdcas2: .long 0xffffffff +/* mdcnfg: .long 0x0bb2bcbf */ +mdcnfg: .long 0x0334b22f @ alt +/* mcs0: .long 0xfff8fff8 */ +msc0: .long 0xad8c4888 @ alt +mecr: .long 0x00060006 +/* mecr: .long 0x994a994a @ alt */ + +/* setting up the memory */ + +.globl lowlevel_init +lowlevel_init: + ldr r0, MEM_BASE + + /* Setup the flash memory */ + ldr r1, msc0 + str r1, [r0, #MSC0] + + /* Set up the DRAM */ + + /* MDCAS0 */ + ldr r1, mdcas0 + str r1, [r0, #MDCAS0] + + /* MDCAS1 */ + ldr r1, mdcas1 + str r1, [r0, #MDCAS1] + + /* MDCAS2 */ + ldr r1, mdcas2 + str r1, [r0, #MDCAS2] + + /* MDCNFG */ + ldr r1, mdcnfg + str r1, [r0, #MDCNFG] + + /* Set up PCMCIA space */ + ldr r1, mecr + str r1, [r0, #MECR] + + /* Load something to activate bank */ + ldr r1, MEM_START + +.rept 8 + ldr r0, [r1] +.endr + + /* everything is fine now */ + mov pc, lr diff --git a/board/lart/memsetup.S b/board/lart/memsetup.S deleted file mode 100644 index 635f2a001a..0000000000 --- a/board/lart/memsetup.S +++ /dev/null @@ -1,94 +0,0 @@ -/* - * Memory Setup stuff - taken from blob memsetup.S - * - * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and - * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - -#include -#include - - -/* some parameters for the board */ - -MEM_BASE: .long 0xa0000000 -MEM_START: .long 0xc0000000 - -#define MDCNFG 0x00 -#define MDCAS0 0x04 -#define MDCAS1 0x08 -#define MDCAS2 0x0c -#define MSC0 0x10 -#define MSC1 0x14 -#define MECR 0x18 - -mdcas0: .long 0xc71c703f -mdcas1: .long 0xffc71c71 -mdcas2: .long 0xffffffff -/* mdcnfg: .long 0x0bb2bcbf */ -mdcnfg: .long 0x0334b22f @ alt -/* mcs0: .long 0xfff8fff8 */ -msc0: .long 0xad8c4888 @ alt -mecr: .long 0x00060006 -/* mecr: .long 0x994a994a @ alt */ - -/* setting up the memory */ - -.globl memsetup -memsetup: - ldr r0, MEM_BASE - - /* Setup the flash memory */ - ldr r1, msc0 - str r1, [r0, #MSC0] - - /* Set up the DRAM */ - - /* MDCAS0 */ - ldr r1, mdcas0 - str r1, [r0, #MDCAS0] - - /* MDCAS1 */ - ldr r1, mdcas1 - str r1, [r0, #MDCAS1] - - /* MDCAS2 */ - ldr r1, mdcas2 - str r1, [r0, #MDCAS2] - - /* MDCNFG */ - ldr r1, mdcnfg - str r1, [r0, #MDCNFG] - - /* Set up PCMCIA space */ - ldr r1, mecr - str r1, [r0, #MECR] - - /* Load something to activate bank */ - ldr r1, MEM_START - -.rept 8 - ldr r0, [r1] -.endr - - /* everything is fine now */ - mov pc, lr diff --git a/board/logodl/Makefile b/board/logodl/Makefile index b635322a81..c7cde7d579 100644 --- a/board/logodl/Makefile +++ b/board/logodl/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := logodl.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $^ diff --git a/board/logodl/lowlevel_init.S b/board/logodl/lowlevel_init.S new file mode 100644 index 0000000000..aa9dcba6fc --- /dev/null +++ b/board/logodl/lowlevel_init.S @@ -0,0 +1,437 @@ +/* + * Most of this taken from Redboot hal_platform_setup.h with cleanup + * + * NOTE: I haven't clean this up considerably, just enough to get it + * running. See hal_platform_setup.h for the source. See + * board/cradle/lowlevel_init.S for another PXA250 setup that is + * much cleaner. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +DRAM_SIZE: .long CFG_DRAM_SIZE + +/* wait for coprocessor write complete */ + .macro CPWAIT reg + mrc p15,0,\reg,c2,c0,0 + mov \reg,\reg + sub pc,pc,#4 + .endm + +_TEXT_BASE: + .word TEXT_BASE + + +/* + * Memory setup + */ + +.globl lowlevel_init +lowlevel_init: + + mov r10, lr + + /* Set up GPIO pins first ----------------------------------------- */ + + ldr r0, =GPSR0 + ldr r1, =CFG_GPSR0_VAL + str r1, [r0] + + ldr r0, =GPSR1 + ldr r1, =CFG_GPSR1_VAL + str r1, [r0] + + ldr r0, =GPSR2 + ldr r1, =CFG_GPSR2_VAL + str r1, [r0] + + ldr r0, =GPCR0 + ldr r1, =CFG_GPCR0_VAL + str r1, [r0] + + ldr r0, =GPCR1 + ldr r1, =CFG_GPCR1_VAL + str r1, [r0] + + ldr r0, =GPCR2 + ldr r1, =CFG_GPCR2_VAL + str r1, [r0] + + ldr r0, =GPDR0 + ldr r1, =CFG_GPDR0_VAL + str r1, [r0] + + ldr r0, =GPDR1 + ldr r1, =CFG_GPDR1_VAL + str r1, [r0] + + ldr r0, =GPDR2 + ldr r1, =CFG_GPDR2_VAL + str r1, [r0] + + ldr r0, =GAFR0_L + ldr r1, =CFG_GAFR0_L_VAL + str r1, [r0] + + ldr r0, =GAFR0_U + ldr r1, =CFG_GAFR0_U_VAL + str r1, [r0] + + ldr r0, =GAFR1_L + ldr r1, =CFG_GAFR1_L_VAL + str r1, [r0] + + ldr r0, =GAFR1_U + ldr r1, =CFG_GAFR1_U_VAL + str r1, [r0] + + ldr r0, =GAFR2_L + ldr r1, =CFG_GAFR2_L_VAL + str r1, [r0] + + ldr r0, =GAFR2_U + ldr r1, =CFG_GAFR2_U_VAL + str r1, [r0] + + ldr r0, =PSSR /* enable GPIO pins */ + ldr r1, =CFG_PSSR_VAL + str r1, [r0] + +/* ldr r3, =MSC1 / low - bank 2 Lubbock Registers / SRAM */ +/* ldr r2, =CFG_MSC1_VAL / high - bank 3 Ethernet Controller */ +/* str r2, [r3] / need to set MSC1 before trying to write to the HEX LEDs */ +/* ldr r2, [r3] / need to read it back to make sure the value latches (see MSC section of manual) */ +/* */ +/* ldr r1, =LED_BLANK */ +/* mov r0, #0xFF */ +/* str r0, [r1] / turn on hex leds */ +/* */ +/*loop: */ +/* */ +/* ldr r0, =0xB0070001 */ +/* ldr r1, =_LED */ +/* str r0, [r1] / hex display */ + + + /* ---------------------------------------------------------------- */ + /* Enable memory interface */ + /* */ + /* The sequence below is based on the recommended init steps */ + /* detailed in the Intel PXA250 Operating Systems Developers Guide, */ + /* Chapter 10. */ + /* ---------------------------------------------------------------- */ + + /* ---------------------------------------------------------------- */ + /* Step 1: Wait for at least 200 microsedonds to allow internal */ + /* clocks to settle. Only necessary after hard reset... */ + /* FIXME: can be optimized later */ + /* ---------------------------------------------------------------- */ + + ldr r3, =OSCR /* reset the OS Timer Count to zero */ + mov r2, #0 + str r2, [r3] + ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ + /* so 0x300 should be plenty */ +1: + ldr r2, [r3] + cmp r4, r2 + bgt 1b + +mem_init: + + ldr r1, =MEMC_BASE /* get memory controller base addr. */ + + /* ---------------------------------------------------------------- */ + /* Step 2a: Initialize Asynchronous static memory controller */ + /* ---------------------------------------------------------------- */ + + /* MSC registers: timing, bus width, mem type */ + + /* MSC0: nCS(0,1) */ + ldr r2, =CFG_MSC0_VAL + str r2, [r1, #MSC0_OFFSET] + ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */ + /* that data latches */ + /* MSC1: nCS(2,3) */ + ldr r2, =CFG_MSC1_VAL + str r2, [r1, #MSC1_OFFSET] + ldr r2, [r1, #MSC1_OFFSET] + + /* MSC2: nCS(4,5) */ + ldr r2, =CFG_MSC2_VAL + str r2, [r1, #MSC2_OFFSET] + ldr r2, [r1, #MSC2_OFFSET] + + /* ---------------------------------------------------------------- */ + /* Step 2b: Initialize Card Interface */ + /* ---------------------------------------------------------------- */ + + /* MECR: Memory Expansion Card Register */ + ldr r2, =CFG_MECR_VAL + str r2, [r1, #MECR_OFFSET] + ldr r2, [r1, #MECR_OFFSET] + + /* MCMEM0: Card Interface slot 0 timing */ + ldr r2, =CFG_MCMEM0_VAL + str r2, [r1, #MCMEM0_OFFSET] + ldr r2, [r1, #MCMEM0_OFFSET] + + /* MCMEM1: Card Interface slot 1 timing */ + ldr r2, =CFG_MCMEM1_VAL + str r2, [r1, #MCMEM1_OFFSET] + ldr r2, [r1, #MCMEM1_OFFSET] + + /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ + ldr r2, =CFG_MCATT0_VAL + str r2, [r1, #MCATT0_OFFSET] + ldr r2, [r1, #MCATT0_OFFSET] + + /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ + ldr r2, =CFG_MCATT1_VAL + str r2, [r1, #MCATT1_OFFSET] + ldr r2, [r1, #MCATT1_OFFSET] + + /* MCIO0: Card Interface I/O Space Timing, slot 0 */ + ldr r2, =CFG_MCIO0_VAL + str r2, [r1, #MCIO0_OFFSET] + ldr r2, [r1, #MCIO0_OFFSET] + + /* MCIO1: Card Interface I/O Space Timing, slot 1 */ + ldr r2, =CFG_MCIO1_VAL + str r2, [r1, #MCIO1_OFFSET] + ldr r2, [r1, #MCIO1_OFFSET] + + /* ---------------------------------------------------------------- */ + /* Step 2c: Write FLYCNFG FIXME: what's that??? */ + /* ---------------------------------------------------------------- */ + + /* test if we run from flash or RAM - RAM/BDI: don't setup RAM */ + adr r3, mem_init /* r0 <- current position of code */ + ldr r2, =mem_init + cmp r3, r2 /* skip init if in place */ + beq initirqs + + + /* ---------------------------------------------------------------- */ + /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */ + /* ---------------------------------------------------------------- */ + + /* Before accessing MDREFR we need a valid DRI field, so we set */ + /* this to power on defaults + DRI field. */ + + ldr r3, =CFG_MDREFR_VAL + ldr r2, =0xFFF + and r3, r3, r2 + ldr r4, =0x03ca4000 + orr r4, r4, r3 + + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r4, [r1, #MDREFR_OFFSET] + + + /* ---------------------------------------------------------------- */ + /* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */ + /* ---------------------------------------------------------------- */ + + /* Initialize SXCNFG register. Assert the enable bits */ + + /* Write SXMRS to cause an MRS command to all enabled banks of */ + /* synchronous static memory. Note that SXLCR need not be written */ + /* at this time. */ + + /* FIXME: we use async mode for now */ + + + /* ---------------------------------------------------------------- */ + /* Step 4: Initialize SDRAM */ + /* ---------------------------------------------------------------- */ + + /* Step 4a: assert MDREFR:K?RUN and configure */ + /* MDREFR:K1DB2 and MDREFR:K2DB2 as desired. */ + + ldr r4, =CFG_MDREFR_VAL + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r4, [r1, #MDREFR_OFFSET] + + /* Step 4b: de-assert MDREFR:SLFRSH. */ + + bic r4, r4, #(MDREFR_SLFRSH) + + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r4, [r1, #MDREFR_OFFSET] + + + /* Step 4c: assert MDREFR:E1PIN and E0PIO */ + + orr r4, r4, #(MDREFR_E1PIN|MDREFR_E0PIN) + + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r4, [r1, #MDREFR_OFFSET] + + + /* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */ + /* configure but not enable each SDRAM partition pair. */ + + ldr r4, =CFG_MDCNFG_VAL + bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1) + + str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */ + ldr r4, [r1, #MDCNFG_OFFSET] + + + /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */ + /* 100..200 µsec. */ + + ldr r3, =OSCR /* reset the OS Timer Count to zero */ + mov r2, #0 + str r2, [r3] + ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ + /* so 0x300 should be plenty */ +1: + ldr r2, [r3] + cmp r4, r2 + bgt 1b + + + /* Step 4f: Trigger a number (usually 8) refresh cycles by */ + /* attempting non-burst read or write accesses to disabled */ + /* SDRAM, as commonly specified in the power up sequence */ + /* documented in SDRAM data sheets. The address(es) used */ + /* for this purpose must not be cacheable. */ + + /* There should 9 writes, since the first write doesn't */ + /* trigger a refresh cycle on PXA250. See Intel PXA250 and */ + /* PXA210 Processors Specification Update, */ + /* Jan 2003, Errata #116, page 30. */ + + + ldr r3, =CFG_DRAM_BASE + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + + /* Step 4g: Write MDCNFG with enable bits asserted */ + /* (MDCNFG:DEx set to 1). */ + + ldr r3, [r1, #MDCNFG_OFFSET] + orr r3, r3, #(MDCNFG_DE0|MDCNFG_DE1) + str r3, [r1, #MDCNFG_OFFSET] + + /* Step 4h: Write MDMRS. */ + + ldr r2, =CFG_MDMRS_VAL + str r2, [r1, #MDMRS_OFFSET] + + + /* We are finished with Intel's memory controller initialisation */ + + /* ---------------------------------------------------------------- */ + /* Disable (mask) all interrupts at interrupt controller */ + /* ---------------------------------------------------------------- */ + +initirqs: + + mov r1, #0 /* clear int. level register (IRQ, not FIQ) */ + ldr r2, =ICLR + str r1, [r2] + + ldr r2, =ICMR /* mask all interrupts at the controller */ + str r1, [r2] + + + /* ---------------------------------------------------------------- */ + /* Clock initialisation */ + /* ---------------------------------------------------------------- */ + +initclks: + + /* Disable the peripheral clocks, and set the core clock frequency */ + /* (hard-coding at 398.12MHz for now). */ + + /* Turn Off ALL on-chip peripheral clocks for re-configuration */ + /* Note: See label 'ENABLECLKS' for the re-enabling */ + ldr r1, =CKEN + mov r2, #0 + str r2, [r1] + + + /* default value in case no valid rotary switch setting is found */ + ldr r2, =(CCCR_L27|CCCR_M2|CCCR_N10) /* DEFAULT: {200/200/100} */ + + /* ... and write the core clock config register */ + ldr r1, =CCCR + str r2, [r1] + + /* enable the 32Khz oscillator for RTC and PowerManager */ +/* + ldr r1, =OSCC + mov r2, #OSCC_OON + str r2, [r1] +*/ + /* NOTE: spin here until OSCC.OOK get set, meaning the PLL */ + /* has settled. */ +60: + ldr r2, [r1] + ands r2, r2, #1 + beq 60b + + /* ---------------------------------------------------------------- */ + /* */ + /* ---------------------------------------------------------------- */ + + /* Save SDRAM size */ + ldr r1, =DRAM_SIZE + str r8, [r1] + + /* Interrupt init: Mask all interrupts */ + ldr r0, =ICMR /* enable no sources */ + mov r1, #0 + str r1, [r0] + + /* FIXME */ + +#ifndef DEBUG + /*Disable software and data breakpoints */ + mov r0,#0 + mcr p15,0,r0,c14,c8,0 /* ibcr0 */ + mcr p15,0,r0,c14,c9,0 /* ibcr1 */ + mcr p15,0,r0,c14,c4,0 /* dbcon */ + + /*Enable all debug functionality */ + mov r0,#0x80000000 + mcr p14,0,r0,c10,c0,0 /* dcsr */ +#endif + + /* ---------------------------------------------------------------- */ + /* End lowlevel_init */ + /* ---------------------------------------------------------------- */ + +endlowlevel_init: + + mov pc, lr diff --git a/board/logodl/memsetup.S b/board/logodl/memsetup.S deleted file mode 100644 index 68577ca069..0000000000 --- a/board/logodl/memsetup.S +++ /dev/null @@ -1,437 +0,0 @@ -/* - * Most of this taken from Redboot hal_platform_setup.h with cleanup - * - * NOTE: I haven't clean this up considerably, just enough to get it - * running. See hal_platform_setup.h for the source. See - * board/cradle/memsetup.S for another PXA250 setup that is - * much cleaner. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -DRAM_SIZE: .long CFG_DRAM_SIZE - -/* wait for coprocessor write complete */ - .macro CPWAIT reg - mrc p15,0,\reg,c2,c0,0 - mov \reg,\reg - sub pc,pc,#4 - .endm - -_TEXT_BASE: - .word TEXT_BASE - - -/* - * Memory setup - */ - -.globl memsetup -memsetup: - - mov r10, lr - - /* Set up GPIO pins first ----------------------------------------- */ - - ldr r0, =GPSR0 - ldr r1, =CFG_GPSR0_VAL - str r1, [r0] - - ldr r0, =GPSR1 - ldr r1, =CFG_GPSR1_VAL - str r1, [r0] - - ldr r0, =GPSR2 - ldr r1, =CFG_GPSR2_VAL - str r1, [r0] - - ldr r0, =GPCR0 - ldr r1, =CFG_GPCR0_VAL - str r1, [r0] - - ldr r0, =GPCR1 - ldr r1, =CFG_GPCR1_VAL - str r1, [r0] - - ldr r0, =GPCR2 - ldr r1, =CFG_GPCR2_VAL - str r1, [r0] - - ldr r0, =GPDR0 - ldr r1, =CFG_GPDR0_VAL - str r1, [r0] - - ldr r0, =GPDR1 - ldr r1, =CFG_GPDR1_VAL - str r1, [r0] - - ldr r0, =GPDR2 - ldr r1, =CFG_GPDR2_VAL - str r1, [r0] - - ldr r0, =GAFR0_L - ldr r1, =CFG_GAFR0_L_VAL - str r1, [r0] - - ldr r0, =GAFR0_U - ldr r1, =CFG_GAFR0_U_VAL - str r1, [r0] - - ldr r0, =GAFR1_L - ldr r1, =CFG_GAFR1_L_VAL - str r1, [r0] - - ldr r0, =GAFR1_U - ldr r1, =CFG_GAFR1_U_VAL - str r1, [r0] - - ldr r0, =GAFR2_L - ldr r1, =CFG_GAFR2_L_VAL - str r1, [r0] - - ldr r0, =GAFR2_U - ldr r1, =CFG_GAFR2_U_VAL - str r1, [r0] - - ldr r0, =PSSR /* enable GPIO pins */ - ldr r1, =CFG_PSSR_VAL - str r1, [r0] - -/* ldr r3, =MSC1 / low - bank 2 Lubbock Registers / SRAM */ -/* ldr r2, =CFG_MSC1_VAL / high - bank 3 Ethernet Controller */ -/* str r2, [r3] / need to set MSC1 before trying to write to the HEX LEDs */ -/* ldr r2, [r3] / need to read it back to make sure the value latches (see MSC section of manual) */ -/* */ -/* ldr r1, =LED_BLANK */ -/* mov r0, #0xFF */ -/* str r0, [r1] / turn on hex leds */ -/* */ -/*loop: */ -/* */ -/* ldr r0, =0xB0070001 */ -/* ldr r1, =_LED */ -/* str r0, [r1] / hex display */ - - - /* ---------------------------------------------------------------- */ - /* Enable memory interface */ - /* */ - /* The sequence below is based on the recommended init steps */ - /* detailed in the Intel PXA250 Operating Systems Developers Guide, */ - /* Chapter 10. */ - /* ---------------------------------------------------------------- */ - - /* ---------------------------------------------------------------- */ - /* Step 1: Wait for at least 200 microsedonds to allow internal */ - /* clocks to settle. Only necessary after hard reset... */ - /* FIXME: can be optimized later */ - /* ---------------------------------------------------------------- */ - - ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ - /* so 0x300 should be plenty */ -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - -mem_init: - - ldr r1, =MEMC_BASE /* get memory controller base addr. */ - - /* ---------------------------------------------------------------- */ - /* Step 2a: Initialize Asynchronous static memory controller */ - /* ---------------------------------------------------------------- */ - - /* MSC registers: timing, bus width, mem type */ - - /* MSC0: nCS(0,1) */ - ldr r2, =CFG_MSC0_VAL - str r2, [r1, #MSC0_OFFSET] - ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */ - /* that data latches */ - /* MSC1: nCS(2,3) */ - ldr r2, =CFG_MSC1_VAL - str r2, [r1, #MSC1_OFFSET] - ldr r2, [r1, #MSC1_OFFSET] - - /* MSC2: nCS(4,5) */ - ldr r2, =CFG_MSC2_VAL - str r2, [r1, #MSC2_OFFSET] - ldr r2, [r1, #MSC2_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 2b: Initialize Card Interface */ - /* ---------------------------------------------------------------- */ - - /* MECR: Memory Expansion Card Register */ - ldr r2, =CFG_MECR_VAL - str r2, [r1, #MECR_OFFSET] - ldr r2, [r1, #MECR_OFFSET] - - /* MCMEM0: Card Interface slot 0 timing */ - ldr r2, =CFG_MCMEM0_VAL - str r2, [r1, #MCMEM0_OFFSET] - ldr r2, [r1, #MCMEM0_OFFSET] - - /* MCMEM1: Card Interface slot 1 timing */ - ldr r2, =CFG_MCMEM1_VAL - str r2, [r1, #MCMEM1_OFFSET] - ldr r2, [r1, #MCMEM1_OFFSET] - - /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ - ldr r2, =CFG_MCATT0_VAL - str r2, [r1, #MCATT0_OFFSET] - ldr r2, [r1, #MCATT0_OFFSET] - - /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ - ldr r2, =CFG_MCATT1_VAL - str r2, [r1, #MCATT1_OFFSET] - ldr r2, [r1, #MCATT1_OFFSET] - - /* MCIO0: Card Interface I/O Space Timing, slot 0 */ - ldr r2, =CFG_MCIO0_VAL - str r2, [r1, #MCIO0_OFFSET] - ldr r2, [r1, #MCIO0_OFFSET] - - /* MCIO1: Card Interface I/O Space Timing, slot 1 */ - ldr r2, =CFG_MCIO1_VAL - str r2, [r1, #MCIO1_OFFSET] - ldr r2, [r1, #MCIO1_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 2c: Write FLYCNFG FIXME: what's that??? */ - /* ---------------------------------------------------------------- */ - - /* test if we run from flash or RAM - RAM/BDI: don't setup RAM */ - adr r3, mem_init /* r0 <- current position of code */ - ldr r2, =mem_init - cmp r3, r2 /* skip init if in place */ - beq initirqs - - - /* ---------------------------------------------------------------- */ - /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */ - /* ---------------------------------------------------------------- */ - - /* Before accessing MDREFR we need a valid DRI field, so we set */ - /* this to power on defaults + DRI field. */ - - ldr r3, =CFG_MDREFR_VAL - ldr r2, =0xFFF - and r3, r3, r2 - ldr r4, =0x03ca4000 - orr r4, r4, r3 - - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] - - - /* ---------------------------------------------------------------- */ - /* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */ - /* ---------------------------------------------------------------- */ - - /* Initialize SXCNFG register. Assert the enable bits */ - - /* Write SXMRS to cause an MRS command to all enabled banks of */ - /* synchronous static memory. Note that SXLCR need not be written */ - /* at this time. */ - - /* FIXME: we use async mode for now */ - - - /* ---------------------------------------------------------------- */ - /* Step 4: Initialize SDRAM */ - /* ---------------------------------------------------------------- */ - - /* Step 4a: assert MDREFR:K?RUN and configure */ - /* MDREFR:K1DB2 and MDREFR:K2DB2 as desired. */ - - ldr r4, =CFG_MDREFR_VAL - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] - - /* Step 4b: de-assert MDREFR:SLFRSH. */ - - bic r4, r4, #(MDREFR_SLFRSH) - - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] - - - /* Step 4c: assert MDREFR:E1PIN and E0PIO */ - - orr r4, r4, #(MDREFR_E1PIN|MDREFR_E0PIN) - - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] - - - /* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */ - /* configure but not enable each SDRAM partition pair. */ - - ldr r4, =CFG_MDCNFG_VAL - bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1) - - str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */ - ldr r4, [r1, #MDCNFG_OFFSET] - - - /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */ - /* 100..200 µsec. */ - - ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ - /* so 0x300 should be plenty */ -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - - - /* Step 4f: Trigger a number (usually 8) refresh cycles by */ - /* attempting non-burst read or write accesses to disabled */ - /* SDRAM, as commonly specified in the power up sequence */ - /* documented in SDRAM data sheets. The address(es) used */ - /* for this purpose must not be cacheable. */ - - /* There should 9 writes, since the first write doesn't */ - /* trigger a refresh cycle on PXA250. See Intel PXA250 and */ - /* PXA210 Processors Specification Update, */ - /* Jan 2003, Errata #116, page 30. */ - - - ldr r3, =CFG_DRAM_BASE - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - - /* Step 4g: Write MDCNFG with enable bits asserted */ - /* (MDCNFG:DEx set to 1). */ - - ldr r3, [r1, #MDCNFG_OFFSET] - orr r3, r3, #(MDCNFG_DE0|MDCNFG_DE1) - str r3, [r1, #MDCNFG_OFFSET] - - /* Step 4h: Write MDMRS. */ - - ldr r2, =CFG_MDMRS_VAL - str r2, [r1, #MDMRS_OFFSET] - - - /* We are finished with Intel's memory controller initialisation */ - - /* ---------------------------------------------------------------- */ - /* Disable (mask) all interrupts at interrupt controller */ - /* ---------------------------------------------------------------- */ - -initirqs: - - mov r1, #0 /* clear int. level register (IRQ, not FIQ) */ - ldr r2, =ICLR - str r1, [r2] - - ldr r2, =ICMR /* mask all interrupts at the controller */ - str r1, [r2] - - - /* ---------------------------------------------------------------- */ - /* Clock initialisation */ - /* ---------------------------------------------------------------- */ - -initclks: - - /* Disable the peripheral clocks, and set the core clock frequency */ - /* (hard-coding at 398.12MHz for now). */ - - /* Turn Off ALL on-chip peripheral clocks for re-configuration */ - /* Note: See label 'ENABLECLKS' for the re-enabling */ - ldr r1, =CKEN - mov r2, #0 - str r2, [r1] - - - /* default value in case no valid rotary switch setting is found */ - ldr r2, =(CCCR_L27|CCCR_M2|CCCR_N10) /* DEFAULT: {200/200/100} */ - - /* ... and write the core clock config register */ - ldr r1, =CCCR - str r2, [r1] - - /* enable the 32Khz oscillator for RTC and PowerManager */ -/* - ldr r1, =OSCC - mov r2, #OSCC_OON - str r2, [r1] -*/ - /* NOTE: spin here until OSCC.OOK get set, meaning the PLL */ - /* has settled. */ -60: - ldr r2, [r1] - ands r2, r2, #1 - beq 60b - - /* ---------------------------------------------------------------- */ - /* */ - /* ---------------------------------------------------------------- */ - - /* Save SDRAM size */ - ldr r1, =DRAM_SIZE - str r8, [r1] - - /* Interrupt init: Mask all interrupts */ - ldr r0, =ICMR /* enable no sources */ - mov r1, #0 - str r1, [r0] - - /* FIXME */ - -#ifndef DEBUG - /*Disable software and data breakpoints */ - mov r0,#0 - mcr p15,0,r0,c14,c8,0 /* ibcr0 */ - mcr p15,0,r0,c14,c9,0 /* ibcr1 */ - mcr p15,0,r0,c14,c4,0 /* dbcon */ - - /*Enable all debug functionality */ - mov r0,#0x80000000 - mcr p14,0,r0,c10,c0,0 /* dcsr */ -#endif - - /* ---------------------------------------------------------------- */ - /* End memsetup */ - /* ---------------------------------------------------------------- */ - -endmemsetup: - - mov pc, lr diff --git a/board/lpd7a40x/Makefile b/board/lpd7a40x/Makefile index f0999d1738..ebe14df1b6 100644 --- a/board/lpd7a40x/Makefile +++ b/board/lpd7a40x/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := lpd7a40x.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/lpd7a40x/lowlevel_init.S b/board/lpd7a40x/lowlevel_init.S new file mode 100644 index 0000000000..b3ed55ce35 --- /dev/null +++ b/board/lpd7a40x/lowlevel_init.S @@ -0,0 +1,212 @@ +/* + * Memory Setup - initialize memory controller(s) for devices required + * to boot and relocate + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include +#include + + +/* memory controller */ +#define BCRX_DEFAULT (0x0000fbe0) +#define BCRX_MW_8 (0x00000000) +#define BCRX_MW_16 (0x10000000) +#define BCRX_MW_32 (0x20000000) +#define BCRX_PME (0x08000000) +#define BCRX_WP (0x04000000) +#define BCRX_WST2_SHIFT (11) +#define BCRX_WST1_SHIFT (5) +#define BCRX_IDCY_SHIFT (0) + +/* Bank0 Async Flash */ +#define BCR0 (0x80002000) +#define BCR0_FLASH (BCRX_MW_32 | (0x08< -#include - - -/* memory controller */ -#define BCRX_DEFAULT (0x0000fbe0) -#define BCRX_MW_8 (0x00000000) -#define BCRX_MW_16 (0x10000000) -#define BCRX_MW_32 (0x20000000) -#define BCRX_PME (0x08000000) -#define BCRX_WP (0x04000000) -#define BCRX_WST2_SHIFT (11) -#define BCRX_WST1_SHIFT (5) -#define BCRX_IDCY_SHIFT (0) - -/* Bank0 Async Flash */ -#define BCR0 (0x80002000) -#define BCR0_FLASH (BCRX_MW_32 | (0x08< +#include +#include + +DRAM_SIZE: .long CFG_DRAM_SIZE + +/* wait for coprocessor write complete */ + .macro CPWAIT reg + mrc p15,0,\reg,c2,c0,0 + mov \reg,\reg + sub pc,pc,#4 + .endm + + +/* + * Memory setup + */ + +.globl lowlevel_init +lowlevel_init: + + mov r10, lr + + /* Set up GPIO pins first ----------------------------------------- */ + + ldr r0, =GPSR0 + ldr r1, =CFG_GPSR0_VAL + str r1, [r0] + + ldr r0, =GPSR1 + ldr r1, =CFG_GPSR1_VAL + str r1, [r0] + + ldr r0, =GPSR2 + ldr r1, =CFG_GPSR2_VAL + str r1, [r0] + + ldr r0, =GPCR0 + ldr r1, =CFG_GPCR0_VAL + str r1, [r0] + + ldr r0, =GPCR1 + ldr r1, =CFG_GPCR1_VAL + str r1, [r0] + + ldr r0, =GPCR2 + ldr r1, =CFG_GPCR2_VAL + str r1, [r0] + + ldr r0, =GPDR0 + ldr r1, =CFG_GPDR0_VAL + str r1, [r0] + + ldr r0, =GPDR1 + ldr r1, =CFG_GPDR1_VAL + str r1, [r0] + + ldr r0, =GPDR2 + ldr r1, =CFG_GPDR2_VAL + str r1, [r0] + + ldr r0, =GAFR0_L + ldr r1, =CFG_GAFR0_L_VAL + str r1, [r0] + + ldr r0, =GAFR0_U + ldr r1, =CFG_GAFR0_U_VAL + str r1, [r0] + + ldr r0, =GAFR1_L + ldr r1, =CFG_GAFR1_L_VAL + str r1, [r0] + + ldr r0, =GAFR1_U + ldr r1, =CFG_GAFR1_U_VAL + str r1, [r0] + + ldr r0, =GAFR2_L + ldr r1, =CFG_GAFR2_L_VAL + str r1, [r0] + + ldr r0, =GAFR2_U + ldr r1, =CFG_GAFR2_U_VAL + str r1, [r0] + + ldr r0, =PSSR /* enable GPIO pins */ + ldr r1, =CFG_PSSR_VAL + str r1, [r0] + + /* ---------------------------------------------------------------- */ + /* Enable memory interface */ + /* */ + /* The sequence below is based on the recommended init steps */ + /* detailed in the Intel PXA250 Operating Systems Developers Guide, */ + /* Chapter 10. */ + /* ---------------------------------------------------------------- */ + + /* ---------------------------------------------------------------- */ + /* Step 1: Wait for at least 200 microsedonds to allow internal */ + /* clocks to settle. Only necessary after hard reset... */ + /* FIXME: can be optimized later */ + /* ---------------------------------------------------------------- */ + + ldr r3, =OSCR /* reset the OS Timer Count to zero */ + mov r2, #0 + str r2, [r3] + ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ + /* so 0x300 should be plenty */ +1: + ldr r2, [r3] + cmp r4, r2 + bgt 1b + +mem_init: + + ldr r1, =MEMC_BASE /* get memory controller base addr. */ + + /* ---------------------------------------------------------------- */ + /* Step 2a: Initialize Asynchronous static memory controller */ + /* ---------------------------------------------------------------- */ + + /* MSC registers: timing, bus width, mem type */ + + /* MSC0: nCS(0,1) */ + ldr r2, =CFG_MSC0_VAL + str r2, [r1, #MSC0_OFFSET] + ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */ + /* that data latches */ + /* MSC1: nCS(2,3) */ + ldr r2, =CFG_MSC1_VAL + str r2, [r1, #MSC1_OFFSET] + ldr r2, [r1, #MSC1_OFFSET] + + /* MSC2: nCS(4,5) */ + ldr r2, =CFG_MSC2_VAL + str r2, [r1, #MSC2_OFFSET] + ldr r2, [r1, #MSC2_OFFSET] + + /* ---------------------------------------------------------------- */ + /* Step 2b: Initialize Card Interface */ + /* ---------------------------------------------------------------- */ + + /* MECR: Memory Expansion Card Register */ + ldr r2, =CFG_MECR_VAL + str r2, [r1, #MECR_OFFSET] + ldr r2, [r1, #MECR_OFFSET] + + /* MCMEM0: Card Interface slot 0 timing */ + ldr r2, =CFG_MCMEM0_VAL + str r2, [r1, #MCMEM0_OFFSET] + ldr r2, [r1, #MCMEM0_OFFSET] + + /* MCMEM1: Card Interface slot 1 timing */ + ldr r2, =CFG_MCMEM1_VAL + str r2, [r1, #MCMEM1_OFFSET] + ldr r2, [r1, #MCMEM1_OFFSET] + + /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ + ldr r2, =CFG_MCATT0_VAL + str r2, [r1, #MCATT0_OFFSET] + ldr r2, [r1, #MCATT0_OFFSET] + + /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ + ldr r2, =CFG_MCATT1_VAL + str r2, [r1, #MCATT1_OFFSET] + ldr r2, [r1, #MCATT1_OFFSET] + + /* MCIO0: Card Interface I/O Space Timing, slot 0 */ + ldr r2, =CFG_MCIO0_VAL + str r2, [r1, #MCIO0_OFFSET] + ldr r2, [r1, #MCIO0_OFFSET] + + /* MCIO1: Card Interface I/O Space Timing, slot 1 */ + ldr r2, =CFG_MCIO1_VAL + str r2, [r1, #MCIO1_OFFSET] + ldr r2, [r1, #MCIO1_OFFSET] + + /* ---------------------------------------------------------------- */ + /* Step 2c: Write FLYCNFG FIXME: what's that??? */ + /* ---------------------------------------------------------------- */ + + + /* ---------------------------------------------------------------- */ + /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */ + /* ---------------------------------------------------------------- */ + + /* Before accessing MDREFR we need a valid DRI field, so we set */ + /* this to power on defaults + DRI field. */ + + ldr r3, =CFG_MDREFR_VAL + ldr r2, =0xFFF + and r3, r3, r2 + ldr r4, =0x03ca4000 + orr r4, r4, r3 + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r4, [r1, #MDREFR_OFFSET] + + /* Note: preserve the mdrefr value in r4 */ + + + /* ---------------------------------------------------------------- */ + /* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */ + /* ---------------------------------------------------------------- */ + + /* Initialize SXCNFG register. Assert the enable bits */ + + /* Write SXMRS to cause an MRS command to all enabled banks of */ + /* synchronous static memory. Note that SXLCR need not be written */ + /* at this time. */ + + /* FIXME: we use async mode for now */ + + + /* ---------------------------------------------------------------- */ + /* Step 4: Initialize SDRAM */ + /* ---------------------------------------------------------------- */ + + /* set MDREFR according to user define with exception of a few bits */ + + ldr r4, =CFG_MDREFR_VAL + orr r4, r4, #(MDREFR_SLFRSH) + bic r4, r4, #(MDREFR_E1PIN|MDREFR_E0PIN) + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r4, [r1, #MDREFR_OFFSET] + + /* Step 4b: de-assert MDREFR:SLFRSH. */ + + bic r4, r4, #(MDREFR_SLFRSH) + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r4, [r1, #MDREFR_OFFSET] + + + /* Step 4c: assert MDREFR:E1PIN and E0PIO as desired */ + + ldr r4, =CFG_MDREFR_VAL + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r4, [r1, #MDREFR_OFFSET] + + + /* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */ + /* configure but not enable each SDRAM partition pair. */ + + ldr r4, =CFG_MDCNFG_VAL + bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1) + + str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */ + ldr r4, [r1, #MDCNFG_OFFSET] + + + /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */ + /* 100..200 µsec. */ + + ldr r3, =OSCR /* reset the OS Timer Count to zero */ + mov r2, #0 + str r2, [r3] + ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ + /* so 0x300 should be plenty */ +1: + ldr r2, [r3] + cmp r4, r2 + bgt 1b + + + /* Step 4f: Trigger a number (usually 8) refresh cycles by */ + /* attempting non-burst read or write accesses to disabled */ + /* SDRAM, as commonly specified in the power up sequence */ + /* documented in SDRAM data sheets. The address(es) used */ + /* for this purpose must not be cacheable. */ + + ldr r3, =CFG_DRAM_BASE + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + + + /* Step 4g: Write MDCNFG with enable bits asserted */ + /* (MDCNFG:DEx set to 1). */ + + ldr r3, [r1, #MDCNFG_OFFSET] + orr r3, r3, #(MDCNFG_DE0|MDCNFG_DE1) + str r3, [r1, #MDCNFG_OFFSET] + + /* Step 4h: Write MDMRS. */ + + ldr r2, =CFG_MDMRS_VAL + str r2, [r1, #MDMRS_OFFSET] + + + /* We are finished with Intel's memory controller initialisation */ + + + /* ---------------------------------------------------------------- */ + /* Disable (mask) all interrupts at interrupt controller */ + /* ---------------------------------------------------------------- */ + +initirqs: + + mov r1, #0 /* clear int. level register (IRQ, not FIQ) */ + ldr r2, =ICLR + str r1, [r2] + + ldr r2, =ICMR /* mask all interrupts at the controller */ + str r1, [r2] + + + /* ---------------------------------------------------------------- */ + /* Clock initialisation */ + /* ---------------------------------------------------------------- */ + +initclks: + + /* Disable the peripheral clocks, and set the core clock frequency */ + /* (hard-coding at 398.12MHz for now). */ + + /* Turn Off ALL on-chip peripheral clocks for re-configuration */ + /* Note: See label 'ENABLECLKS' for the re-enabling */ + ldr r1, =CKEN + mov r2, #0 + str r2, [r1] + + + /* default value in case no valid rotary switch setting is found */ + ldr r2, =(CCCR_L27|CCCR_M2|CCCR_N10) /* DEFAULT: {200/200/100} */ + + /* ... and write the core clock config register */ + ldr r1, =CCCR + str r2, [r1] + +#ifdef RTC + /* enable the 32Khz oscillator for RTC and PowerManager */ + + ldr r1, =OSCC + mov r2, #OSCC_OON + str r2, [r1] + + /* NOTE: spin here until OSCC.OOK get set, meaning the PLL */ + /* has settled. */ +60: + ldr r2, [r1] + ands r2, r2, #1 + beq 60b +#endif + + /* ---------------------------------------------------------------- */ + /* */ + /* ---------------------------------------------------------------- */ + + /* Save SDRAM size */ + ldr r1, =DRAM_SIZE + str r8, [r1] + + /* Interrupt init: Mask all interrupts */ + ldr r0, =ICMR /* enable no sources */ + mov r1, #0 + str r1, [r0] + + /* FIXME */ + +#define NODEBUG +#ifdef NODEBUG + /*Disable software and data breakpoints */ + mov r0,#0 + mcr p15,0,r0,c14,c8,0 /* ibcr0 */ + mcr p15,0,r0,c14,c9,0 /* ibcr1 */ + mcr p15,0,r0,c14,c4,0 /* dbcon */ + + /*Enable all debug functionality */ + mov r0,#0x80000000 + mcr p14,0,r0,c10,c0,0 /* dcsr */ + +#endif + + /* ---------------------------------------------------------------- */ + /* End lowlevel_init */ + /* ---------------------------------------------------------------- */ + +endlowlevel_init: + + mov pc, lr diff --git a/board/lubbock/memsetup.S b/board/lubbock/memsetup.S deleted file mode 100644 index dc0b7be024..0000000000 --- a/board/lubbock/memsetup.S +++ /dev/null @@ -1,411 +0,0 @@ -/* - * Most of this taken from Redboot hal_platform_setup.h with cleanup - * - * NOTE: I haven't clean this up considerably, just enough to get it - * running. See hal_platform_setup.h for the source. See - * board/cradle/memsetup.S for another PXA250 setup that is - * much cleaner. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -DRAM_SIZE: .long CFG_DRAM_SIZE - -/* wait for coprocessor write complete */ - .macro CPWAIT reg - mrc p15,0,\reg,c2,c0,0 - mov \reg,\reg - sub pc,pc,#4 - .endm - - -/* - * Memory setup - */ - -.globl memsetup -memsetup: - - mov r10, lr - - /* Set up GPIO pins first ----------------------------------------- */ - - ldr r0, =GPSR0 - ldr r1, =CFG_GPSR0_VAL - str r1, [r0] - - ldr r0, =GPSR1 - ldr r1, =CFG_GPSR1_VAL - str r1, [r0] - - ldr r0, =GPSR2 - ldr r1, =CFG_GPSR2_VAL - str r1, [r0] - - ldr r0, =GPCR0 - ldr r1, =CFG_GPCR0_VAL - str r1, [r0] - - ldr r0, =GPCR1 - ldr r1, =CFG_GPCR1_VAL - str r1, [r0] - - ldr r0, =GPCR2 - ldr r1, =CFG_GPCR2_VAL - str r1, [r0] - - ldr r0, =GPDR0 - ldr r1, =CFG_GPDR0_VAL - str r1, [r0] - - ldr r0, =GPDR1 - ldr r1, =CFG_GPDR1_VAL - str r1, [r0] - - ldr r0, =GPDR2 - ldr r1, =CFG_GPDR2_VAL - str r1, [r0] - - ldr r0, =GAFR0_L - ldr r1, =CFG_GAFR0_L_VAL - str r1, [r0] - - ldr r0, =GAFR0_U - ldr r1, =CFG_GAFR0_U_VAL - str r1, [r0] - - ldr r0, =GAFR1_L - ldr r1, =CFG_GAFR1_L_VAL - str r1, [r0] - - ldr r0, =GAFR1_U - ldr r1, =CFG_GAFR1_U_VAL - str r1, [r0] - - ldr r0, =GAFR2_L - ldr r1, =CFG_GAFR2_L_VAL - str r1, [r0] - - ldr r0, =GAFR2_U - ldr r1, =CFG_GAFR2_U_VAL - str r1, [r0] - - ldr r0, =PSSR /* enable GPIO pins */ - ldr r1, =CFG_PSSR_VAL - str r1, [r0] - - /* ---------------------------------------------------------------- */ - /* Enable memory interface */ - /* */ - /* The sequence below is based on the recommended init steps */ - /* detailed in the Intel PXA250 Operating Systems Developers Guide, */ - /* Chapter 10. */ - /* ---------------------------------------------------------------- */ - - /* ---------------------------------------------------------------- */ - /* Step 1: Wait for at least 200 microsedonds to allow internal */ - /* clocks to settle. Only necessary after hard reset... */ - /* FIXME: can be optimized later */ - /* ---------------------------------------------------------------- */ - - ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ - /* so 0x300 should be plenty */ -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - -mem_init: - - ldr r1, =MEMC_BASE /* get memory controller base addr. */ - - /* ---------------------------------------------------------------- */ - /* Step 2a: Initialize Asynchronous static memory controller */ - /* ---------------------------------------------------------------- */ - - /* MSC registers: timing, bus width, mem type */ - - /* MSC0: nCS(0,1) */ - ldr r2, =CFG_MSC0_VAL - str r2, [r1, #MSC0_OFFSET] - ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */ - /* that data latches */ - /* MSC1: nCS(2,3) */ - ldr r2, =CFG_MSC1_VAL - str r2, [r1, #MSC1_OFFSET] - ldr r2, [r1, #MSC1_OFFSET] - - /* MSC2: nCS(4,5) */ - ldr r2, =CFG_MSC2_VAL - str r2, [r1, #MSC2_OFFSET] - ldr r2, [r1, #MSC2_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 2b: Initialize Card Interface */ - /* ---------------------------------------------------------------- */ - - /* MECR: Memory Expansion Card Register */ - ldr r2, =CFG_MECR_VAL - str r2, [r1, #MECR_OFFSET] - ldr r2, [r1, #MECR_OFFSET] - - /* MCMEM0: Card Interface slot 0 timing */ - ldr r2, =CFG_MCMEM0_VAL - str r2, [r1, #MCMEM0_OFFSET] - ldr r2, [r1, #MCMEM0_OFFSET] - - /* MCMEM1: Card Interface slot 1 timing */ - ldr r2, =CFG_MCMEM1_VAL - str r2, [r1, #MCMEM1_OFFSET] - ldr r2, [r1, #MCMEM1_OFFSET] - - /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ - ldr r2, =CFG_MCATT0_VAL - str r2, [r1, #MCATT0_OFFSET] - ldr r2, [r1, #MCATT0_OFFSET] - - /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ - ldr r2, =CFG_MCATT1_VAL - str r2, [r1, #MCATT1_OFFSET] - ldr r2, [r1, #MCATT1_OFFSET] - - /* MCIO0: Card Interface I/O Space Timing, slot 0 */ - ldr r2, =CFG_MCIO0_VAL - str r2, [r1, #MCIO0_OFFSET] - ldr r2, [r1, #MCIO0_OFFSET] - - /* MCIO1: Card Interface I/O Space Timing, slot 1 */ - ldr r2, =CFG_MCIO1_VAL - str r2, [r1, #MCIO1_OFFSET] - ldr r2, [r1, #MCIO1_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 2c: Write FLYCNFG FIXME: what's that??? */ - /* ---------------------------------------------------------------- */ - - - /* ---------------------------------------------------------------- */ - /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */ - /* ---------------------------------------------------------------- */ - - /* Before accessing MDREFR we need a valid DRI field, so we set */ - /* this to power on defaults + DRI field. */ - - ldr r3, =CFG_MDREFR_VAL - ldr r2, =0xFFF - and r3, r3, r2 - ldr r4, =0x03ca4000 - orr r4, r4, r3 - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] - - /* Note: preserve the mdrefr value in r4 */ - - - /* ---------------------------------------------------------------- */ - /* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */ - /* ---------------------------------------------------------------- */ - - /* Initialize SXCNFG register. Assert the enable bits */ - - /* Write SXMRS to cause an MRS command to all enabled banks of */ - /* synchronous static memory. Note that SXLCR need not be written */ - /* at this time. */ - - /* FIXME: we use async mode for now */ - - - /* ---------------------------------------------------------------- */ - /* Step 4: Initialize SDRAM */ - /* ---------------------------------------------------------------- */ - - /* set MDREFR according to user define with exception of a few bits */ - - ldr r4, =CFG_MDREFR_VAL - orr r4, r4, #(MDREFR_SLFRSH) - bic r4, r4, #(MDREFR_E1PIN|MDREFR_E0PIN) - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] - - /* Step 4b: de-assert MDREFR:SLFRSH. */ - - bic r4, r4, #(MDREFR_SLFRSH) - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] - - - /* Step 4c: assert MDREFR:E1PIN and E0PIO as desired */ - - ldr r4, =CFG_MDREFR_VAL - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] - - - /* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */ - /* configure but not enable each SDRAM partition pair. */ - - ldr r4, =CFG_MDCNFG_VAL - bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1) - - str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */ - ldr r4, [r1, #MDCNFG_OFFSET] - - - /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */ - /* 100..200 µsec. */ - - ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ - /* so 0x300 should be plenty */ -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - - - /* Step 4f: Trigger a number (usually 8) refresh cycles by */ - /* attempting non-burst read or write accesses to disabled */ - /* SDRAM, as commonly specified in the power up sequence */ - /* documented in SDRAM data sheets. The address(es) used */ - /* for this purpose must not be cacheable. */ - - ldr r3, =CFG_DRAM_BASE - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - - - /* Step 4g: Write MDCNFG with enable bits asserted */ - /* (MDCNFG:DEx set to 1). */ - - ldr r3, [r1, #MDCNFG_OFFSET] - orr r3, r3, #(MDCNFG_DE0|MDCNFG_DE1) - str r3, [r1, #MDCNFG_OFFSET] - - /* Step 4h: Write MDMRS. */ - - ldr r2, =CFG_MDMRS_VAL - str r2, [r1, #MDMRS_OFFSET] - - - /* We are finished with Intel's memory controller initialisation */ - - - /* ---------------------------------------------------------------- */ - /* Disable (mask) all interrupts at interrupt controller */ - /* ---------------------------------------------------------------- */ - -initirqs: - - mov r1, #0 /* clear int. level register (IRQ, not FIQ) */ - ldr r2, =ICLR - str r1, [r2] - - ldr r2, =ICMR /* mask all interrupts at the controller */ - str r1, [r2] - - - /* ---------------------------------------------------------------- */ - /* Clock initialisation */ - /* ---------------------------------------------------------------- */ - -initclks: - - /* Disable the peripheral clocks, and set the core clock frequency */ - /* (hard-coding at 398.12MHz for now). */ - - /* Turn Off ALL on-chip peripheral clocks for re-configuration */ - /* Note: See label 'ENABLECLKS' for the re-enabling */ - ldr r1, =CKEN - mov r2, #0 - str r2, [r1] - - - /* default value in case no valid rotary switch setting is found */ - ldr r2, =(CCCR_L27|CCCR_M2|CCCR_N10) /* DEFAULT: {200/200/100} */ - - /* ... and write the core clock config register */ - ldr r1, =CCCR - str r2, [r1] - -#ifdef RTC - /* enable the 32Khz oscillator for RTC and PowerManager */ - - ldr r1, =OSCC - mov r2, #OSCC_OON - str r2, [r1] - - /* NOTE: spin here until OSCC.OOK get set, meaning the PLL */ - /* has settled. */ -60: - ldr r2, [r1] - ands r2, r2, #1 - beq 60b -#endif - - /* ---------------------------------------------------------------- */ - /* */ - /* ---------------------------------------------------------------- */ - - /* Save SDRAM size */ - ldr r1, =DRAM_SIZE - str r8, [r1] - - /* Interrupt init: Mask all interrupts */ - ldr r0, =ICMR /* enable no sources */ - mov r1, #0 - str r1, [r0] - - /* FIXME */ - -#define NODEBUG -#ifdef NODEBUG - /*Disable software and data breakpoints */ - mov r0,#0 - mcr p15,0,r0,c14,c8,0 /* ibcr0 */ - mcr p15,0,r0,c14,c9,0 /* ibcr1 */ - mcr p15,0,r0,c14,c4,0 /* dbcon */ - - /*Enable all debug functionality */ - mov r0,#0x80000000 - mcr p14,0,r0,c10,c0,0 /* dcsr */ - -#endif - - /* ---------------------------------------------------------------- */ - /* End memsetup */ - /* ---------------------------------------------------------------- */ - -endmemsetup: - - mov pc, lr diff --git a/board/modnet50/Makefile b/board/modnet50/Makefile index 7dbcc1c937..ab2c376ff4 100644 --- a/board/modnet50/Makefile +++ b/board/modnet50/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := modnet50.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $^ diff --git a/board/modnet50/lowlevel_init.S b/board/modnet50/lowlevel_init.S new file mode 100644 index 0000000000..c98c155458 --- /dev/null +++ b/board/modnet50/lowlevel_init.S @@ -0,0 +1,204 @@ +/* + * Memory Setup stuff - taken from Linux + * + * Copyright (c) 2002 Stephan Linz , + * (c) 2004 IMMS gGmbH , Thomas Elste + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include +#include +#include + + +/* some parameters for the board */ +#define FLASH_90ns_WAIT_STATES ((NETARM_PLL_COUNT_VAL + 2) / 3) +#define FLASH_70ns_WAIT_STATES 4 + +#define NETARM_MMAP_CS0_BASE (PHYS_FLASH_1) +#if 1 +#define NETARM_MMAP_CS0_MASK (~(PHYS_FLASH_1_SIZE - 1)) +#else +#define NETARM_MMAP_CS0_MASK (~(1000000 - 1)) +#endif +#define NETARM_MMAP_CS1_BASE (PHYS_SDRAM_1) +#define NETARM_MMAP_CS1_MASK (~(PHYS_SDRAM_1_SIZE - 1)) +#define NETARM_MMAP_CS2_BASE (PHYS_SDRAM_2) +#define NETARM_MMAP_CS2_MASK (~(PHYS_SDRAM_2_SIZE - 1)) +#if defined(CONFIG_NETARM_EEPROM) && defined(PHYS_NVRAM_1) && defined(PHYS_NVRAM_SIZE) +#define NETARM_MMAP_CS3_BASE (PHYS_NVRAM_1) +#define NETARM_MMAP_CS3_MASK (~(PHYS_NVRAM_SIZE - 1)) +#endif +#define NETARM_MMAP_CS4_BASE (PHYS_EXT_1) +#define NETARM_MMAP_CS4_MASK (~(PHYS_EXT_SIZE - 1)) + +/* setting up the memory */ +.globl lowlevel_init +lowlevel_init: + +#if defined(CONFIG_MODNET50) + ldr pc, =(_jump_to_high + NETARM_MMAP_CS0_BASE - TEXT_BASE) + +_jump_to_high: + /* + * MEM Config Reg + * --------------------------------------------------- + */ + ldr r0, =NETARM_MEM_MODULE_BASE + ldr r1, =( NETARM_MEM_REFR_PERIOD_USEC(16) | \ + NETARM_MEM_CFG_REFRESH_EN | \ + NETARM_MEM_CFG_REFR_CYCLE_5CLKS ) + str r1, [r0, #+NETARM_MEM_MODULE_CONFIG] + + +memsetup_cs0: + /* + * Base Addr / Option Reg 0 (Flash) + * --------------------------------------------------- + */ + ldr r1, =( NETARM_MEM_BAR_BASE(NETARM_MMAP_CS0_BASE) | \ + NETARM_MEM_BAR_DRAM_FP | \ + NETARM_MEM_BAR_DRAM_MUX_INT | \ + NETARM_MEM_BAR_DRAM_MUX_BAL | \ + NETARM_MEM_BAR_VALID ) + str r1, [r0, #+NETARM_MEM_CS0_BASE_ADDR] + + /* trust that the bus size for flash was strapped correctly */ + /* this saves the bus width in r2 and then ORs it back in */ + /* it's pretty safe assumption, otherwise it wouldn't boot */ + ldr r2, [r0, #+NETARM_MEM_CS0_OPTIONS] + and r2, r2, #NETARM_MEM_OPT_BUS_SIZE_MASK + +/* just a test: assume 32 bit flash mem */ +/* mov r2, #NETARM_MEM_OPT_32BIT */ + + ldr r1, =( NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS0_MASK) | \ + NETARM_MEM_OPT_WAIT_STATES(FLASH_70ns_WAIT_STATES) | \ + NETARM_MEM_OPT_BCYC_4 | \ + NETARM_MEM_OPT_BSIZE_16 | \ + NETARM_MEM_OPT_16BIT | \ + NETARM_MEM_OPT_READ_ASYNC | \ + NETARM_MEM_OPT_WRITE_ASYNC ) + + orr r1, r1, r2 + str r1, [r0, #+NETARM_MEM_CS0_OPTIONS] + + +memsetup_cs1: + /* + * Base Addr / Option Reg 1 (DRAM #1) + * --------------------------------------------------- + */ +#ifdef CONFIG_NETARM_NET40_REV2 + /* we have to config SDRAM in burst mode */ + ldr r1, =( NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS1_MASK) | \ + NETARM_MEM_OPT_BCYC_2 | \ + NETARM_MEM_OPT_BSIZE_16 | \ + NETARM_MEM_OPT_WAIT_STATES(0) | \ + NETARM_MEM_OPT_32BIT | \ + NETARM_MEM_OPT_READ_ASYNC | \ + NETARM_MEM_OPT_WRITE_ASYNC ) + str r1, [r0, #+NETARM_MEM_CS1_OPTIONS] + + ldr r1, =( NETARM_MEM_BAR_BASE(NETARM_MMAP_CS1_BASE) | \ + NETARM_MEM_BAR_DRAM_SYNC | \ + NETARM_MEM_BAR_DRAM_MUX_INT | \ + NETARM_MEM_BAR_DRAM_MUX_UNBAL | \ + NETARM_MEM_BAR_DRAM_SEL | \ + NETARM_MEM_BAR_BURST_EN | \ + NETARM_MEM_BAR_VALID ) + str r1, [r0, #+NETARM_MEM_CS1_BASE_ADDR] +#else + /* we have to config FPDRAM in burst mode with smaller burst access size */ + ldr r1, =( NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS1_MASK) | \ + NETARM_MEM_OPT_BCYC_2 | \ + NETARM_MEM_OPT_BSIZE_16 | \ + NETARM_MEM_OPT_WAIT_STATES(0) | \ + NETARM_MEM_OPT_32BIT | \ + NETARM_MEM_OPT_READ_ASYNC | \ + NETARM_MEM_OPT_WRITE_ASYNC ) + str r1, [r0, #+NETARM_MEM_CS1_OPTIONS] + + ldr r1, =( NETARM_MEM_BAR_BASE(NETARM_MMAP_CS1_BASE) | \ + NETARM_MEM_BAR_DRAM_SYNC | \ + NETARM_MEM_BAR_DRAM_MUX_INT | \ + NETARM_MEM_BAR_DRAM_MUX_UNBAL | \ + NETARM_MEM_BAR_DRAM_SEL | \ + NETARM_MEM_BAR_BURST_EN | \ + NETARM_MEM_BAR_VALID ) + str r1, [r0, #+NETARM_MEM_CS1_BASE_ADDR] + +#endif /* CONFIG_NETARM_NET40_REV2 */ + + +memsetup_cs3: + /* + * Base Addr / Option Reg 3 (EEPROM, NVRAM) + * --------------------------------------------------- + */ +#if defined(CONFIG_NETARM_EEPROM) && defined(PHYS_NVRAM_1) && defined(PHYS_NVRAM_SIZE) + ldr r1, =( NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS3_MASK) | \ + NETARM_MEM_OPT_BCYC_3 | \ + NETARM_MEM_OPT_BSIZE_2 | \ + NETARM_MEM_OPT_WAIT_STATES(10) | \ + NETARM_MEM_OPT_8BIT | \ + NETARM_MEM_OPT_READ_ASYNC | \ + NETARM_MEM_OPT_WRITE_ASYNC ) + str r1, [r0, #+NETARM_MEM_CS3_OPTIONS] + + ldr r1, =( NETARM_MEM_BAR_BASE(NETARM_MMAP_CS3_BASE) | \ + NETARM_MEM_BAR_DRAM_FP | \ + NETARM_MEM_BAR_DRAM_MUX_INT | \ + NETARM_MEM_BAR_DRAM_MUX_BAL | \ + NETARM_MEM_BAR_VALID ) + str r1, [r0, #+NETARM_MEM_CS3_BASE_ADDR] +#else + /* we don't need EEPROM --> no config */ + ldr r1, =( 0 ) + str r1, [r0, #+NETARM_MEM_CS3_OPTIONS] + + ldr r1, =( 0 ) + str r1, [r0, #+NETARM_MEM_CS3_BASE_ADDR] +#endif + + +#else +/* +#error "missing CONFIG_MODNET50 (see your config.h)" +*/ +#endif /* CONFIG_MODNET50 */ + + +lowlevel_init_end: + /* + * manipulate address in lr and ip to match new + * address space + */ + ldr r3, =(NETARM_MMAP_CS0_BASE) + mov r0, lr + add r0, r3, r0 + mov lr, r0 + mov r0, ip + add r0, r3, r0 + mov ip, r0 + + /* everything is fine now */ + mov pc, lr diff --git a/board/modnet50/memsetup.S b/board/modnet50/memsetup.S deleted file mode 100644 index 674b1d2e05..0000000000 --- a/board/modnet50/memsetup.S +++ /dev/null @@ -1,204 +0,0 @@ -/* - * Memory Setup stuff - taken from Linux - * - * Copyright (c) 2002 Stephan Linz , - * (c) 2004 IMMS gGmbH , Thomas Elste - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - -#include -#include -#include - - -/* some parameters for the board */ -#define FLASH_90ns_WAIT_STATES ((NETARM_PLL_COUNT_VAL + 2) / 3) -#define FLASH_70ns_WAIT_STATES 4 - -#define NETARM_MMAP_CS0_BASE (PHYS_FLASH_1) -#if 1 -#define NETARM_MMAP_CS0_MASK (~(PHYS_FLASH_1_SIZE - 1)) -#else -#define NETARM_MMAP_CS0_MASK (~(1000000 - 1)) -#endif -#define NETARM_MMAP_CS1_BASE (PHYS_SDRAM_1) -#define NETARM_MMAP_CS1_MASK (~(PHYS_SDRAM_1_SIZE - 1)) -#define NETARM_MMAP_CS2_BASE (PHYS_SDRAM_2) -#define NETARM_MMAP_CS2_MASK (~(PHYS_SDRAM_2_SIZE - 1)) -#if defined(CONFIG_NETARM_EEPROM) && defined(PHYS_NVRAM_1) && defined(PHYS_NVRAM_SIZE) -#define NETARM_MMAP_CS3_BASE (PHYS_NVRAM_1) -#define NETARM_MMAP_CS3_MASK (~(PHYS_NVRAM_SIZE - 1)) -#endif -#define NETARM_MMAP_CS4_BASE (PHYS_EXT_1) -#define NETARM_MMAP_CS4_MASK (~(PHYS_EXT_SIZE - 1)) - -/* setting up the memory */ -.globl memsetup -memsetup: - -#if defined(CONFIG_MODNET50) - ldr pc, =(_jump_to_high + NETARM_MMAP_CS0_BASE - TEXT_BASE) - -_jump_to_high: - /* - * MEM Config Reg - * --------------------------------------------------- - */ - ldr r0, =NETARM_MEM_MODULE_BASE - ldr r1, =( NETARM_MEM_REFR_PERIOD_USEC(16) | \ - NETARM_MEM_CFG_REFRESH_EN | \ - NETARM_MEM_CFG_REFR_CYCLE_5CLKS ) - str r1, [r0, #+NETARM_MEM_MODULE_CONFIG] - - -memsetup_cs0: - /* - * Base Addr / Option Reg 0 (Flash) - * --------------------------------------------------- - */ - ldr r1, =( NETARM_MEM_BAR_BASE(NETARM_MMAP_CS0_BASE) | \ - NETARM_MEM_BAR_DRAM_FP | \ - NETARM_MEM_BAR_DRAM_MUX_INT | \ - NETARM_MEM_BAR_DRAM_MUX_BAL | \ - NETARM_MEM_BAR_VALID ) - str r1, [r0, #+NETARM_MEM_CS0_BASE_ADDR] - - /* trust that the bus size for flash was strapped correctly */ - /* this saves the bus width in r2 and then ORs it back in */ - /* it's pretty safe assumption, otherwise it wouldn't boot */ - ldr r2, [r0, #+NETARM_MEM_CS0_OPTIONS] - and r2, r2, #NETARM_MEM_OPT_BUS_SIZE_MASK - -/* just a test: assume 32 bit flash mem */ -/* mov r2, #NETARM_MEM_OPT_32BIT */ - - ldr r1, =( NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS0_MASK) | \ - NETARM_MEM_OPT_WAIT_STATES(FLASH_70ns_WAIT_STATES) | \ - NETARM_MEM_OPT_BCYC_4 | \ - NETARM_MEM_OPT_BSIZE_16 | \ - NETARM_MEM_OPT_16BIT | \ - NETARM_MEM_OPT_READ_ASYNC | \ - NETARM_MEM_OPT_WRITE_ASYNC ) - - orr r1, r1, r2 - str r1, [r0, #+NETARM_MEM_CS0_OPTIONS] - - -memsetup_cs1: - /* - * Base Addr / Option Reg 1 (DRAM #1) - * --------------------------------------------------- - */ -#ifdef CONFIG_NETARM_NET40_REV2 - /* we have to config SDRAM in burst mode */ - ldr r1, =( NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS1_MASK) | \ - NETARM_MEM_OPT_BCYC_2 | \ - NETARM_MEM_OPT_BSIZE_16 | \ - NETARM_MEM_OPT_WAIT_STATES(0) | \ - NETARM_MEM_OPT_32BIT | \ - NETARM_MEM_OPT_READ_ASYNC | \ - NETARM_MEM_OPT_WRITE_ASYNC ) - str r1, [r0, #+NETARM_MEM_CS1_OPTIONS] - - ldr r1, =( NETARM_MEM_BAR_BASE(NETARM_MMAP_CS1_BASE) | \ - NETARM_MEM_BAR_DRAM_SYNC | \ - NETARM_MEM_BAR_DRAM_MUX_INT | \ - NETARM_MEM_BAR_DRAM_MUX_UNBAL | \ - NETARM_MEM_BAR_DRAM_SEL | \ - NETARM_MEM_BAR_BURST_EN | \ - NETARM_MEM_BAR_VALID ) - str r1, [r0, #+NETARM_MEM_CS1_BASE_ADDR] -#else - /* we have to config FPDRAM in burst mode with smaller burst access size */ - ldr r1, =( NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS1_MASK) | \ - NETARM_MEM_OPT_BCYC_2 | \ - NETARM_MEM_OPT_BSIZE_16 | \ - NETARM_MEM_OPT_WAIT_STATES(0) | \ - NETARM_MEM_OPT_32BIT | \ - NETARM_MEM_OPT_READ_ASYNC | \ - NETARM_MEM_OPT_WRITE_ASYNC ) - str r1, [r0, #+NETARM_MEM_CS1_OPTIONS] - - ldr r1, =( NETARM_MEM_BAR_BASE(NETARM_MMAP_CS1_BASE) | \ - NETARM_MEM_BAR_DRAM_SYNC | \ - NETARM_MEM_BAR_DRAM_MUX_INT | \ - NETARM_MEM_BAR_DRAM_MUX_UNBAL | \ - NETARM_MEM_BAR_DRAM_SEL | \ - NETARM_MEM_BAR_BURST_EN | \ - NETARM_MEM_BAR_VALID ) - str r1, [r0, #+NETARM_MEM_CS1_BASE_ADDR] - -#endif /* CONFIG_NETARM_NET40_REV2 */ - - -memsetup_cs3: - /* - * Base Addr / Option Reg 3 (EEPROM, NVRAM) - * --------------------------------------------------- - */ -#if defined(CONFIG_NETARM_EEPROM) && defined(PHYS_NVRAM_1) && defined(PHYS_NVRAM_SIZE) - ldr r1, =( NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS3_MASK) | \ - NETARM_MEM_OPT_BCYC_3 | \ - NETARM_MEM_OPT_BSIZE_2 | \ - NETARM_MEM_OPT_WAIT_STATES(10) | \ - NETARM_MEM_OPT_8BIT | \ - NETARM_MEM_OPT_READ_ASYNC | \ - NETARM_MEM_OPT_WRITE_ASYNC ) - str r1, [r0, #+NETARM_MEM_CS3_OPTIONS] - - ldr r1, =( NETARM_MEM_BAR_BASE(NETARM_MMAP_CS3_BASE) | \ - NETARM_MEM_BAR_DRAM_FP | \ - NETARM_MEM_BAR_DRAM_MUX_INT | \ - NETARM_MEM_BAR_DRAM_MUX_BAL | \ - NETARM_MEM_BAR_VALID ) - str r1, [r0, #+NETARM_MEM_CS3_BASE_ADDR] -#else - /* we don't need EEPROM --> no config */ - ldr r1, =( 0 ) - str r1, [r0, #+NETARM_MEM_CS3_OPTIONS] - - ldr r1, =( 0 ) - str r1, [r0, #+NETARM_MEM_CS3_BASE_ADDR] -#endif - - -#else -/* -#error "missing CONFIG_MODNET50 (see your config.h)" -*/ -#endif /* CONFIG_MODNET50 */ - - -memsetup_end: - /* - * manipulate address in lr and ip to match new - * address space - */ - ldr r3, =(NETARM_MMAP_CS0_BASE) - mov r0, lr - add r0, r3, r0 - mov lr, r0 - mov r0, ip - add r0, r3, r0 - mov ip, r0 - - /* everything is fine now */ - mov pc, lr diff --git a/board/mpl/vcma9/Makefile b/board/mpl/vcma9/Makefile index f9b78f947d..304c965d12 100644 --- a/board/mpl/vcma9/Makefile +++ b/board/mpl/vcma9/Makefile @@ -28,7 +28,7 @@ LIB = lib$(BOARD).a OBJS := vcma9.o flash.o cmd_vcma9.o OBJS += ../common/common_util.o ../common/memtst.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/mpl/vcma9/lowlevel_init.S b/board/mpl/vcma9/lowlevel_init.S new file mode 100644 index 0000000000..a02335314b --- /dev/null +++ b/board/mpl/vcma9/lowlevel_init.S @@ -0,0 +1,212 @@ +/* + * Memory Setup stuff - taken from blob memsetup.S + * + * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and + * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) + * + * Modified for the Samsung SMDK2410 by + * (C) Copyright 2002 + * David Mueller, ELSOFT AG, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include +#include + + +/* some parameters for the board */ + +#define BWSCON 0x48000000 +#define PLD_BASE 0x2C000000 +#define SDRAM_REG 0x2C000106 + +/* BWSCON */ +#define DW8 (0x0) +#define DW16 (0x1) +#define DW32 (0x2) +#define WAIT (0x1<<2) +#define UBLB (0x1<<3) + +/* BANKSIZE */ +#define BURST_EN (0x1<<7) + +#define B1_BWSCON (DW16) +#define B2_BWSCON (DW32) +#define B3_BWSCON (DW32) +#define B4_BWSCON (DW16 + WAIT + UBLB) +#define B5_BWSCON (DW8 + UBLB) +#define B6_BWSCON (DW32) +#define B7_BWSCON (DW32) + +/* BANK0CON */ +#define B0_Tacs 0x0 /* 0clk */ +#define B0_Tcos 0x1 /* 1clk */ +/*#define B0_Tcos 0x0 0clk */ +#define B0_Tacc 0x7 /* 14clk */ +/*#define B0_Tacc 0x5 8clk */ +#define B0_Tcoh 0x0 /* 0clk */ +#define B0_Tah 0x0 /* 0clk */ +#define B0_Tacp 0x0 /* page mode is not used */ +#define B0_PMC 0x0 /* page mode disabled */ + +/* BANK1CON */ +#define B1_Tacs 0x0 /* 0clk */ +#define B1_Tcos 0x1 /* 1clk */ +/*#define B1_Tcos 0x0 0clk */ +#define B1_Tacc 0x7 /* 14clk */ +/*#define B1_Tacc 0x5 8clk */ +#define B1_Tcoh 0x0 /* 0clk */ +#define B1_Tah 0x0 /* 0clk */ +#define B1_Tacp 0x0 /* page mode is not used */ +#define B1_PMC 0x0 /* page mode disabled */ + +#define B2_Tacs 0x3 /* 4clk */ +#define B2_Tcos 0x3 /* 4clk */ +#define B2_Tacc 0x7 /* 14clk */ +#define B2_Tcoh 0x3 /* 4clk */ +#define B2_Tah 0x3 /* 4clk */ +#define B2_Tacp 0x0 /* page mode is not used */ +#define B2_PMC 0x0 /* page mode disabled */ + +#define B3_Tacs 0x3 /* 4clk */ +#define B3_Tcos 0x3 /* 4clk */ +#define B3_Tacc 0x7 /* 14clk */ +#define B3_Tcoh 0x3 /* 4clk */ +#define B3_Tah 0x3 /* 4clk */ +#define B3_Tacp 0x0 /* page mode is not used */ +#define B3_PMC 0x0 /* page mode disabled */ + +#define B4_Tacs 0x3 /* 4clk */ +#define B4_Tcos 0x1 /* 1clk */ +#define B4_Tacc 0x7 /* 14clk */ +#define B4_Tcoh 0x1 /* 1clk */ +#define B4_Tah 0x0 /* 0clk */ +#define B4_Tacp 0x0 /* page mode is not used */ +#define B4_PMC 0x0 /* page mode disabled */ + +#define B5_Tacs 0x0 /* 0clk */ +#define B5_Tcos 0x3 /* 4clk */ +#define B5_Tacc 0x5 /* 8clk */ +#define B5_Tcoh 0x2 /* 2clk */ +#define B5_Tah 0x1 /* 1clk */ +#define B5_Tacp 0x0 /* page mode is not used */ +#define B5_PMC 0x0 /* page mode disabled */ + +#define B6_MT 0x3 /* SDRAM */ +#define B6_Trcd 0x1 /* 3clk */ +#define B6_SCAN 0x2 /* 10bit */ + +#define B7_MT 0x3 /* SDRAM */ +#define B7_Trcd 0x1 /* 3clk */ +#define B7_SCAN 0x2 /* 10bit */ + +/* REFRESH parameter */ +#define REFEN 0x1 /* Refresh enable */ +#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */ +#define Trp 0x0 /* 2clk */ +#define Trc 0x3 /* 7clk */ +#define Tchr 0x2 /* 3clk */ +#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */ +/**************************************/ + +_TEXT_BASE: + .word TEXT_BASE + +.globl lowlevel_init +lowlevel_init: + /* memory control configuration */ + /* make r0 relative the current location so that it */ + /* reads SMRDATA out of FLASH rather than memory ! */ + ldr r0, =CSDATA + ldr r1, _TEXT_BASE + sub r0, r0, r1 + ldr r1, =BWSCON /* Bus Width Status Controller */ + add r2, r0, #CSDATA_END-CSDATA +0: + ldr r3, [r0], #4 + str r3, [r1], #4 + cmp r2, r0 + bne 0b + + /* PLD access is now possible */ + /* r0 == SDRAMDATA */ + /* r1 == SDRAM controller regs */ + ldr r2, =PLD_BASE + ldrb r3, [r2, #SDRAM_REG-PLD_BASE] + mov r4, #SDRAMDATA1_END-SDRAMDATA + /* calculate start and end point */ + mla r0, r3, r4, r0 + add r2, r0, r4 +0: + ldr r3, [r0], #4 + str r3, [r1], #4 + cmp r2, r0 + bne 0b + + /* everything is fine now */ + mov pc, lr + + .ltorg +/* the literal pools origin */ + +CSDATA: + .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28)) + .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) + .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) + .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) + .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) + .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) + .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) +CSDATA_END: + +SDRAMDATA: +/* 4Mx8x4 */ + .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) + .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) + .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) + .word 0x32 + BURST_EN + .word 0x30 + .word 0x30 +SDRAMDATA1_END: + +/* 8Mx8x4 (not implemented yet) */ + .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) + .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) + .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) + .word 0x32 + BURST_EN + .word 0x30 + .word 0x30 + +/* 2Mx8x4 (not implemented yet) */ + .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) + .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) + .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) + .word 0x32 + BURST_EN + .word 0x30 + .word 0x30 + +/* 4Mx8x2 (not implemented yet) */ + .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) + .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) + .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) + .word 0x32 + BURST_EN + .word 0x30 + .word 0x30 diff --git a/board/mpl/vcma9/memsetup.S b/board/mpl/vcma9/memsetup.S deleted file mode 100644 index 98aec3db4d..0000000000 --- a/board/mpl/vcma9/memsetup.S +++ /dev/null @@ -1,212 +0,0 @@ -/* - * Memory Setup stuff - taken from blob memsetup.S - * - * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and - * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) - * - * Modified for the Samsung SMDK2410 by - * (C) Copyright 2002 - * David Mueller, ELSOFT AG, - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - -#include -#include - - -/* some parameters for the board */ - -#define BWSCON 0x48000000 -#define PLD_BASE 0x2C000000 -#define SDRAM_REG 0x2C000106 - -/* BWSCON */ -#define DW8 (0x0) -#define DW16 (0x1) -#define DW32 (0x2) -#define WAIT (0x1<<2) -#define UBLB (0x1<<3) - -/* BANKSIZE */ -#define BURST_EN (0x1<<7) - -#define B1_BWSCON (DW16) -#define B2_BWSCON (DW32) -#define B3_BWSCON (DW32) -#define B4_BWSCON (DW16 + WAIT + UBLB) -#define B5_BWSCON (DW8 + UBLB) -#define B6_BWSCON (DW32) -#define B7_BWSCON (DW32) - -/* BANK0CON */ -#define B0_Tacs 0x0 /* 0clk */ -#define B0_Tcos 0x1 /* 1clk */ -/*#define B0_Tcos 0x0 0clk */ -#define B0_Tacc 0x7 /* 14clk */ -/*#define B0_Tacc 0x5 8clk */ -#define B0_Tcoh 0x0 /* 0clk */ -#define B0_Tah 0x0 /* 0clk */ -#define B0_Tacp 0x0 /* page mode is not used */ -#define B0_PMC 0x0 /* page mode disabled */ - -/* BANK1CON */ -#define B1_Tacs 0x0 /* 0clk */ -#define B1_Tcos 0x1 /* 1clk */ -/*#define B1_Tcos 0x0 0clk */ -#define B1_Tacc 0x7 /* 14clk */ -/*#define B1_Tacc 0x5 8clk */ -#define B1_Tcoh 0x0 /* 0clk */ -#define B1_Tah 0x0 /* 0clk */ -#define B1_Tacp 0x0 /* page mode is not used */ -#define B1_PMC 0x0 /* page mode disabled */ - -#define B2_Tacs 0x3 /* 4clk */ -#define B2_Tcos 0x3 /* 4clk */ -#define B2_Tacc 0x7 /* 14clk */ -#define B2_Tcoh 0x3 /* 4clk */ -#define B2_Tah 0x3 /* 4clk */ -#define B2_Tacp 0x0 /* page mode is not used */ -#define B2_PMC 0x0 /* page mode disabled */ - -#define B3_Tacs 0x3 /* 4clk */ -#define B3_Tcos 0x3 /* 4clk */ -#define B3_Tacc 0x7 /* 14clk */ -#define B3_Tcoh 0x3 /* 4clk */ -#define B3_Tah 0x3 /* 4clk */ -#define B3_Tacp 0x0 /* page mode is not used */ -#define B3_PMC 0x0 /* page mode disabled */ - -#define B4_Tacs 0x3 /* 4clk */ -#define B4_Tcos 0x1 /* 1clk */ -#define B4_Tacc 0x7 /* 14clk */ -#define B4_Tcoh 0x1 /* 1clk */ -#define B4_Tah 0x0 /* 0clk */ -#define B4_Tacp 0x0 /* page mode is not used */ -#define B4_PMC 0x0 /* page mode disabled */ - -#define B5_Tacs 0x0 /* 0clk */ -#define B5_Tcos 0x3 /* 4clk */ -#define B5_Tacc 0x5 /* 8clk */ -#define B5_Tcoh 0x2 /* 2clk */ -#define B5_Tah 0x1 /* 1clk */ -#define B5_Tacp 0x0 /* page mode is not used */ -#define B5_PMC 0x0 /* page mode disabled */ - -#define B6_MT 0x3 /* SDRAM */ -#define B6_Trcd 0x1 /* 3clk */ -#define B6_SCAN 0x2 /* 10bit */ - -#define B7_MT 0x3 /* SDRAM */ -#define B7_Trcd 0x1 /* 3clk */ -#define B7_SCAN 0x2 /* 10bit */ - -/* REFRESH parameter */ -#define REFEN 0x1 /* Refresh enable */ -#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */ -#define Trp 0x0 /* 2clk */ -#define Trc 0x3 /* 7clk */ -#define Tchr 0x2 /* 3clk */ -#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */ -/**************************************/ - -_TEXT_BASE: - .word TEXT_BASE - -.globl memsetup -memsetup: - /* memory control configuration */ - /* make r0 relative the current location so that it */ - /* reads SMRDATA out of FLASH rather than memory ! */ - ldr r0, =CSDATA - ldr r1, _TEXT_BASE - sub r0, r0, r1 - ldr r1, =BWSCON /* Bus Width Status Controller */ - add r2, r0, #CSDATA_END-CSDATA -0: - ldr r3, [r0], #4 - str r3, [r1], #4 - cmp r2, r0 - bne 0b - - /* PLD access is now possible */ - /* r0 == SDRAMDATA */ - /* r1 == SDRAM controller regs */ - ldr r2, =PLD_BASE - ldrb r3, [r2, #SDRAM_REG-PLD_BASE] - mov r4, #SDRAMDATA1_END-SDRAMDATA - /* calculate start and end point */ - mla r0, r3, r4, r0 - add r2, r0, r4 -0: - ldr r3, [r0], #4 - str r3, [r1], #4 - cmp r2, r0 - bne 0b - - /* everything is fine now */ - mov pc, lr - - .ltorg -/* the literal pools origin */ - -CSDATA: - .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28)) - .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) - .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) - .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) - .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) - .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) - .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) -CSDATA_END: - -SDRAMDATA: -/* 4Mx8x4 */ - .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) - .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) - .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) - .word 0x32 + BURST_EN - .word 0x30 - .word 0x30 -SDRAMDATA1_END: - -/* 8Mx8x4 (not implemented yet) */ - .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) - .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) - .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) - .word 0x32 + BURST_EN - .word 0x30 - .word 0x30 - -/* 2Mx8x4 (not implemented yet) */ - .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) - .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) - .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) - .word 0x32 + BURST_EN - .word 0x30 - .word 0x30 - -/* 4Mx8x2 (not implemented yet) */ - .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) - .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) - .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) - .word 0x32 + BURST_EN - .word 0x30 - .word 0x30 diff --git a/board/mx1ads/Makefile b/board/mx1ads/Makefile index 72f850d9ce..3e805feb40 100644 --- a/board/mx1ads/Makefile +++ b/board/mx1ads/Makefile @@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := mx1ads.o syncflash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/mx1ads/lowlevel_init.S b/board/mx1ads/lowlevel_init.S new file mode 100644 index 0000000000..09c260d64d --- /dev/null +++ b/board/mx1ads/lowlevel_init.S @@ -0,0 +1,81 @@ +/* + * board/mx1ads/lowlevel_init.S + * + * (c) Copyright 2004 + * Techware Information Technology, Inc. + * http://www.techware.com.tw/ + * + * Ming-Len Wu + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#define SDCTL0 0x221000 +#define SDCTL1 0x221004 + + +_TEXT_BASE: + .word TEXT_BASE + +.globl lowlevel_init +lowlevel_init: +/* memory controller init */ + + ldr r1, =SDCTL0 + +/* Set Precharge Command */ + + ldr r3, =0x92120200 +/* ldr r3, =0x92120251 +*/ + str r3, [r1] + +/* Issue Precharge All Commad */ + ldr r3, =0x8200000 + ldr r2, [r3] + +/* Set AutoRefresh Command */ + ldr r3, =0xA2120200 + str r3, [r1] + +/* Issue AutoRefresh Command */ + ldr r3, =0x8000000 + ldr r2, [r3] + ldr r2, [r3] + ldr r2, [r3] + ldr r2, [r3] + ldr r2, [r3] + ldr r2, [r3] + ldr r2, [r3] + ldr r2, [r3] + +/* Set Mode Register */ + ldr r3, =0xB2120200 + str r3, [r1] + +/* Issue Mode Register Command */ + ldr r3, =0x08111800 /* Mode Register Value */ + ldr r2, [r3] + +/* Set Normal Mode */ + ldr r3, =0x82124200 + str r3, [r1] + +/* everything is fine now */ + mov pc, lr diff --git a/board/mx1ads/memsetup.S b/board/mx1ads/memsetup.S deleted file mode 100644 index 1b06fa3c4d..0000000000 --- a/board/mx1ads/memsetup.S +++ /dev/null @@ -1,81 +0,0 @@ -/* - * board/mx1ads/memsetup.S - * - * (c) Copyright 2004 - * Techware Information Technology, Inc. - * http://www.techware.com.tw/ - * - * Ming-Len Wu - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include - -#define SDCTL0 0x221000 -#define SDCTL1 0x221004 - - -_TEXT_BASE: - .word TEXT_BASE - -.globl memsetup -memsetup: -/* memory controller init */ - - ldr r1, =SDCTL0 - -/* Set Precharge Command */ - - ldr r3, =0x92120200 -/* ldr r3, =0x92120251 -*/ - str r3, [r1] - -/* Issue Precharge All Commad */ - ldr r3, =0x8200000 - ldr r2, [r3] - -/* Set AutoRefresh Command */ - ldr r3, =0xA2120200 - str r3, [r1] - -/* Issue AutoRefresh Command */ - ldr r3, =0x8000000 - ldr r2, [r3] - ldr r2, [r3] - ldr r2, [r3] - ldr r2, [r3] - ldr r2, [r3] - ldr r2, [r3] - ldr r2, [r3] - ldr r2, [r3] - -/* Set Mode Register */ - ldr r3, =0xB2120200 - str r3, [r1] - -/* Issue Mode Register Command */ - ldr r3, =0x08111800 /* Mode Register Value */ - ldr r2, [r3] - -/* Set Normal Mode */ - ldr r3, =0x82124200 - str r3, [r1] - -/* everything is fine now */ - mov pc, lr diff --git a/board/mx1fs2/Makefile b/board/mx1fs2/Makefile index 86aef5c3da..9e3bca14cd 100644 --- a/board/mx1fs2/Makefile +++ b/board/mx1fs2/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := mx1fs2.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $^ diff --git a/board/mx1fs2/lowlevel_init.S b/board/mx1fs2/lowlevel_init.S new file mode 100644 index 0000000000..8211beb3f8 --- /dev/null +++ b/board/mx1fs2/lowlevel_init.S @@ -0,0 +1,188 @@ +/* + * Copyright (C) 2004 Sascha Hauer, Pengutronix + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA + * 02111-1307, USA. + * + */ + +#include +#include +#include + +.globl lowlevel_init +lowlevel_init: + + mov r10, lr + +/* Change PERCLK1DIV to 14 ie 14+1 */ + ldr r0, =PCDR + ldr r1, =CFG_PCDR_VAL + str r1, [r0] + +/* set MCU PLL Control Register 0 */ + + ldr r0, =MPCTL0 + ldr r1, =CFG_MPCTL0_VAL + str r1, [r0] + +/* set MCU PLL Control Register 1 */ + + ldr r0, =MPCTL1 + ldr r1, =CFG_MPCTL1_VAL + str r1, [r0] + +/* set mpll restart bit */ + ldr r0, =CSCR + ldr r1, [r0] + orr r1,r1,#(1<<21) + str r1, [r0] + + mov r2,#0x10 +1: + mov r3,#0x2000 +2: + subs r3,r3,#1 + bne 2b + + subs r2,r2,#1 + bne 1b + +/* set System PLL Control Register 0 */ + + ldr r0, =SPCTL0 + ldr r1, =CFG_SPCTL0_VAL + str r1, [r0] + +/* set System PLL Control Register 1 */ + + ldr r0, =SPCTL1 + ldr r1, =CFG_SPCTL1_VAL + str r1, [r0] + +/* set spll restart bit */ + ldr r0, =CSCR + ldr r1, [r0] + orr r1,r1,#(1<<22) + str r1, [r0] + + mov r2,#0x10 +1: + mov r3,#0x2000 +2: + subs r3,r3,#1 + bne 2b + + subs r2,r2,#1 + bne 1b + + ldr r0, =CSCR + ldr r1, =CFG_CSCR_VAL + str r1, [r0] + + ldr r0, =GPCR + ldr r1, =CFG_GPCR_VAL + str r1, [r0] + +/* + * I have now read the ARM920 DataSheet back-to-Back, and have stumbled upon + * this..... + * + * It would appear that from a Cold-Boot the ARM920T enters "FastBus" mode CP15 + * register 1, this stops it using the output of the PLL and thus runs at the + * slow rate. Unless you place the Core into "Asynch" mode, the CPU will never + * use the value set in the CM_OSC registers...regardless of what you set it + * too! Thus, although i thought i was running at 140MHz, i'm actually running + * at 40!.. + * + * Slapping this into my bootloader does the trick... + * + * MRC p15,0,r0,c1,c0,0 ; read core configuration register + * ORR r0,r0,#0xC0000000 ; set asynchronous clocks and not fastbus mode + * MCR p15,0,r0,c1,c0,0 ; write modified value to core configuration + * register + * + */ + MRC p15,0,r0,c1,c0,0 +/* ORR r0,r0,#0xC0000000 async mode */ +/* ORR r0,r0,#0x40000000 sync mode */ + ORR r0,r0,#0xC0000000 + MCR p15,0,r0,c1,c0,0 + + ldr r0, =GIUS(0) + ldr r1, =CFG_GIUS_A_VAL + str r1, [r0] + + ldr r0, =FMCR + ldr r1, =CFG_FMCR_VAL + str r1, [r0] + + ldr r0, =CS0U + ldr r1, =CFG_CS0U_VAL + str r1, [r0] + + ldr r0, =CS0L + ldr r1, =CFG_CS0L_VAL + str r1, [r0] + + ldr r0, =CS1U + ldr r1, =CFG_CS1U_VAL + str r1, [r0] + + ldr r0, =CS1L + ldr r1, =CFG_CS1L_VAL + str r1, [r0] + + ldr r0, =CS4U + ldr r1, =CFG_CS4U_VAL + str r1, [r0] + + ldr r0, =CS4L + ldr r1, =CFG_CS4L_VAL + str r1, [r0] + + ldr r0, =CS5U + ldr r1, =CFG_CS5U_VAL + str r1, [r0] + + ldr r0, =CS5L + ldr r1, =CFG_CS5L_VAL + str r1, [r0] + +/* SDRAM Setup */ + + ldr r1,=0x00221000 /* adr of SDCTRL0 */ + ldr r0,=0x92120200 + str r0,[r1,#0] /* put in precharge command mode */ + ldr r2,=0x08200000 /* adr for precharge cmd */ + ldr r0,[r2,#0] /* precharge */ + ldr r0,=0xA2120200 + ldr r2,=0x08000000 /* start of SDRAM */ + str r0,[r1,#0] /* put in auto-refresh mode */ + ldr r0,[r2,#0] /* auto-refresh */ + ldr r0,[r2,#0] /* auto-refresh */ + ldr r0,[r2,#0] /* auto-refresh */ + ldr r0,[r2,#0] /* auto-refresh */ + ldr r0,[r2,#0] /* auto-refresh */ + ldr r0,[r2,#0] /* auto-refresh */ + ldr r0,[r2,#0] /* auto-refresh */ + ldr r0,=0xB2120200 + ldr r2,=0x08111800 + str r0,[r1,#0] /* setup for mode register of SDRAM */ + ldr r0,[r2,#0] /* program mode register */ + ldr r0,=0x82124267 + str r0,[r1,#0] /* back to normal operation */ + + mov pc,r10 diff --git a/board/mx1fs2/memsetup.S b/board/mx1fs2/memsetup.S deleted file mode 100644 index 5ec751b73d..0000000000 --- a/board/mx1fs2/memsetup.S +++ /dev/null @@ -1,188 +0,0 @@ -/* - * Copyright (C) 2004 Sascha Hauer, Pengutronix - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA - * 02111-1307, USA. - * - */ - -#include -#include -#include - -.globl memsetup -memsetup: - - mov r10, lr - -/* Change PERCLK1DIV to 14 ie 14+1 */ - ldr r0, =PCDR - ldr r1, =CFG_PCDR_VAL - str r1, [r0] - -/* set MCU PLL Control Register 0 */ - - ldr r0, =MPCTL0 - ldr r1, =CFG_MPCTL0_VAL - str r1, [r0] - -/* set MCU PLL Control Register 1 */ - - ldr r0, =MPCTL1 - ldr r1, =CFG_MPCTL1_VAL - str r1, [r0] - -/* set mpll restart bit */ - ldr r0, =CSCR - ldr r1, [r0] - orr r1,r1,#(1<<21) - str r1, [r0] - - mov r2,#0x10 -1: - mov r3,#0x2000 -2: - subs r3,r3,#1 - bne 2b - - subs r2,r2,#1 - bne 1b - -/* set System PLL Control Register 0 */ - - ldr r0, =SPCTL0 - ldr r1, =CFG_SPCTL0_VAL - str r1, [r0] - -/* set System PLL Control Register 1 */ - - ldr r0, =SPCTL1 - ldr r1, =CFG_SPCTL1_VAL - str r1, [r0] - -/* set spll restart bit */ - ldr r0, =CSCR - ldr r1, [r0] - orr r1,r1,#(1<<22) - str r1, [r0] - - mov r2,#0x10 -1: - mov r3,#0x2000 -2: - subs r3,r3,#1 - bne 2b - - subs r2,r2,#1 - bne 1b - - ldr r0, =CSCR - ldr r1, =CFG_CSCR_VAL - str r1, [r0] - - ldr r0, =GPCR - ldr r1, =CFG_GPCR_VAL - str r1, [r0] - -/* - * I have now read the ARM920 DataSheet back-to-Back, and have stumbled upon - * this..... - * - * It would appear that from a Cold-Boot the ARM920T enters "FastBus" mode CP15 - * register 1, this stops it using the output of the PLL and thus runs at the - * slow rate. Unless you place the Core into "Asynch" mode, the CPU will never - * use the value set in the CM_OSC registers...regardless of what you set it - * too! Thus, although i thought i was running at 140MHz, i'm actually running - * at 40!.. - * - * Slapping this into my bootloader does the trick... - * - * MRC p15,0,r0,c1,c0,0 ; read core configuration register - * ORR r0,r0,#0xC0000000 ; set asynchronous clocks and not fastbus mode - * MCR p15,0,r0,c1,c0,0 ; write modified value to core configuration - * register - * - */ - MRC p15,0,r0,c1,c0,0 -/* ORR r0,r0,#0xC0000000 async mode */ -/* ORR r0,r0,#0x40000000 sync mode */ - ORR r0,r0,#0xC0000000 - MCR p15,0,r0,c1,c0,0 - - ldr r0, =GIUS(0) - ldr r1, =CFG_GIUS_A_VAL - str r1, [r0] - - ldr r0, =FMCR - ldr r1, =CFG_FMCR_VAL - str r1, [r0] - - ldr r0, =CS0U - ldr r1, =CFG_CS0U_VAL - str r1, [r0] - - ldr r0, =CS0L - ldr r1, =CFG_CS0L_VAL - str r1, [r0] - - ldr r0, =CS1U - ldr r1, =CFG_CS1U_VAL - str r1, [r0] - - ldr r0, =CS1L - ldr r1, =CFG_CS1L_VAL - str r1, [r0] - - ldr r0, =CS4U - ldr r1, =CFG_CS4U_VAL - str r1, [r0] - - ldr r0, =CS4L - ldr r1, =CFG_CS4L_VAL - str r1, [r0] - - ldr r0, =CS5U - ldr r1, =CFG_CS5U_VAL - str r1, [r0] - - ldr r0, =CS5L - ldr r1, =CFG_CS5L_VAL - str r1, [r0] - -/* SDRAM Setup */ - - ldr r1,=0x00221000 /* adr of SDCTRL0 */ - ldr r0,=0x92120200 - str r0,[r1,#0] /* put in precharge command mode */ - ldr r2,=0x08200000 /* adr for precharge cmd */ - ldr r0,[r2,#0] /* precharge */ - ldr r0,=0xA2120200 - ldr r2,=0x08000000 /* start of SDRAM */ - str r0,[r1,#0] /* put in auto-refresh mode */ - ldr r0,[r2,#0] /* auto-refresh */ - ldr r0,[r2,#0] /* auto-refresh */ - ldr r0,[r2,#0] /* auto-refresh */ - ldr r0,[r2,#0] /* auto-refresh */ - ldr r0,[r2,#0] /* auto-refresh */ - ldr r0,[r2,#0] /* auto-refresh */ - ldr r0,[r2,#0] /* auto-refresh */ - ldr r0,=0xB2120200 - ldr r2,=0x08111800 - str r0,[r1,#0] /* setup for mode register of SDRAM */ - ldr r0,[r2,#0] /* program mode register */ - ldr r0,=0x82124267 - str r0,[r1,#0] /* back to normal operation */ - - mov pc,r10 diff --git a/board/pleb2/Makefile b/board/pleb2/Makefile index 5fdc874dfe..95d9170b24 100644 --- a/board/pleb2/Makefile +++ b/board/pleb2/Makefile @@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := pleb2.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/pleb2/lowlevel_init.S b/board/pleb2/lowlevel_init.S new file mode 100644 index 0000000000..add2c531ab --- /dev/null +++ b/board/pleb2/lowlevel_init.S @@ -0,0 +1,488 @@ +/* + * Most of this taken from Redboot hal_platform_setup.h with cleanup + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +DRAM_SIZE: .long CFG_DRAM_SIZE + +/* wait for coprocessor write complete */ + .macro CPWAIT reg + mrc p15,0,\reg,c2,c0,0 + mov \reg,\reg + sub pc,pc,#4 + .endm + +.globl lowlevel_init +lowlevel_init: + + mov r10, lr + + /* Set up GPIO pins first */ + + ldr r0, =GPSR0 + ldr r1, =CFG_GPSR0_VAL + str r1, [r0] + + ldr r0, =GPSR1 + ldr r1, =CFG_GPSR1_VAL + str r1, [r0] + + ldr r0, =GPSR2 + ldr r1, =CFG_GPSR2_VAL + str r1, [r0] + + ldr r0, =GPCR0 + ldr r1, =CFG_GPCR0_VAL + str r1, [r0] + + ldr r0, =GPCR1 + ldr r1, =CFG_GPCR1_VAL + str r1, [r0] + + ldr r0, =GPCR2 + ldr r1, =CFG_GPCR2_VAL + str r1, [r0] + + ldr r0, =GRER0 + ldr r1, =CFG_GRER0_VAL + str r1, [r0] + + ldr r0, =GRER1 + ldr r1, =CFG_GRER1_VAL + str r1, [r0] + + ldr r0, =GRER2 + ldr r1, =CFG_GRER2_VAL + str r1, [r0] + + ldr r0, =GFER0 + ldr r1, =CFG_GFER0_VAL + str r1, [r0] + + ldr r0, =GFER1 + ldr r1, =CFG_GFER1_VAL + str r1, [r0] + + ldr r0, =GFER2 + ldr r1, =CFG_GFER2_VAL + str r1, [r0] + + ldr r0, =GPDR0 + ldr r1, =CFG_GPDR0_VAL + str r1, [r0] + + ldr r0, =GPDR1 + ldr r1, =CFG_GPDR1_VAL + str r1, [r0] + + ldr r0, =GPDR2 + ldr r1, =CFG_GPDR2_VAL + str r1, [r0] + + ldr r0, =GAFR0_L + ldr r1, =CFG_GAFR0_L_VAL + str r1, [r0] + + ldr r0, =GAFR0_U + ldr r1, =CFG_GAFR0_U_VAL + str r1, [r0] + + ldr r0, =GAFR1_L + ldr r1, =CFG_GAFR1_L_VAL + str r1, [r0] + + ldr r0, =GAFR1_U + ldr r1, =CFG_GAFR1_U_VAL + str r1, [r0] + + ldr r0, =GAFR2_L + ldr r1, =CFG_GAFR2_L_VAL + str r1, [r0] + + ldr r0, =GAFR2_U + ldr r1, =CFG_GAFR2_U_VAL + str r1, [r0] + + /* enable GPIO pins */ + ldr r0, =PSSR + ldr r1, =CFG_PSSR_VAL + str r1, [r0] + + +/********************************************************************* + Initlialize Memory Controller + + See PXA250 Operating System Developer's Guide + + pause for 200 uSecs- allow internal clocks to settle + *Note: only need this if hard reset... doing it anyway for now +*/ + + @ Step 1 + @ ---- Wait 200 usec + ldr r3, =OSCR @ reset the OS Timer Count to zero + mov r2, #0 + str r2, [r3] + ldr r4, =0x300 @ really 0x2E1 is about 200usec, so 0x300 should be plenty +1: + ldr r2, [r3] + cmp r4, r2 + bgt 1b + +mem_init: + @ get memory controller base address + ldr r1, =MEMC_BASE + +@**************************************************************************** +@ Step 2 +@ + + @ Step 2a + @ write msc0, read back to ensure data latches + @ + ldr r2, =CFG_MSC0_VAL + str r2, [r1, #MSC0_OFFSET] + ldr r2, [r1, #MSC0_OFFSET] + + @ write msc1 + ldr r2, =CFG_MSC1_VAL + str r2, [r1, #MSC1_OFFSET] + ldr r2, [r1, #MSC1_OFFSET] + + @ write msc2 + ldr r2, =CFG_MSC2_VAL + str r2, [r1, #MSC2_OFFSET] + ldr r2, [r1, #MSC2_OFFSET] + + +@ Step 2b + @ write mecr + ldr r2, =CFG_MECR_VAL + str r2, [r1, #MECR_OFFSET] + + @ write mcmem0 + ldr r2, =CFG_MCMEM0_VAL + str r2, [r1, #MCMEM0_OFFSET] + + @ write mcmem1 + ldr r2, =CFG_MCMEM1_VAL + str r2, [r1, #MCMEM1_OFFSET] + + @ write mcatt0 + ldr r2, =CFG_MCATT0_VAL + str r2, [r1, #MCATT0_OFFSET] + + @ write mcatt1 + ldr r2, =CFG_MCATT1_VAL + str r2, [r1, #MCATT1_OFFSET] + + @ write mcio0 + ldr r2, =CFG_MCIO0_VAL + str r2, [r1, #MCIO0_OFFSET] + + @ write mcio1 + ldr r2, =CFG_MCIO1_VAL + str r2, [r1, #MCIO1_OFFSET] + +@ Step 2c + @ fly-by-dma is defeatured on this part + @ write flycnfg + @ldr r2, =CFG_FLYCNFG_VAL + @str r2, [r1, #FLYCNFG_OFFSET] + +/* FIXME Does this sequence really make sense */ +#ifdef REDBOOT_WAY + @ Step 2d + @ get the mdrefr settings + ldr r3, =CFG_MDREFR_VAL + + @ extract DRI field (we need a valid DRI field) + @ + ldr r2, =0xFFF + + @ valid DRI field in r3 + @ + and r3, r3, r2 + + @ get the reset state of MDREFR + @ + ldr r4, [r1, #MDREFR_OFFSET] + + @ clear the DRI field + @ + bic r4, r4, r2 + + @ insert the valid DRI field loaded above + @ + orr r4, r4, r3 + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + + @ *Note: preserve the mdrefr value in r4 * + +@**************************************************************************** +@ Step 3 +@ +@ NO SRAM + + mov pc, r10 + + +@**************************************************************************** +@ Step 4 +@ + + @ Assumes previous mdrefr value in r4, if not then read current mdrefr + + @ clear the free-running clock bits + @ (clear K0Free, K1Free, K2Free + @ + bic r4, r4, #(0x00800000 | 0x01000000 | 0x02000000) + + @ set K0RUN for CPLD clock + @ + orr r4, r4, #0x00002000 + + @ set K1RUN if bank 0 installed + @ + orr r4, r4, #0x00010000 + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + ldr r4, [r1, #MDREFR_OFFSET] + + @ deassert SLFRSH + @ + bic r4, r4, #0x00400000 + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + + @ assert E1PIN + @ + orr r4, r4, #0x00008000 + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + ldr r4, [r1, #MDREFR_OFFSET] + nop + nop +#else + @ Step 2d + @ get the mdrefr settings + ldr r3, =CFG_MDREFR_VAL + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + + @ Step 4 + + @ set K0RUN for CPLD clock + @ + orr r4, r4, #0x00002000 + + @ set K1RUN for bank 0 + @ + orr r4, r4, #0x00010000 + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + ldr r4, [r1, #MDREFR_OFFSET] + + @ deassert SLFRSH + @ + bic r4, r4, #0x00400000 + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + + @ assert E1PIN + @ + orr r4, r4, #0x00008000 + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + ldr r4, [r1, #MDREFR_OFFSET] + nop + nop +#endif + + @ Step 4d + @ fetch platform value of mdcnfg + @ + ldr r2, =CFG_MDCNFG_VAL + + @ disable all sdram banks + @ + bic r2, r2, #(MDCNFG_DE0 | MDCNFG_DE1) + bic r2, r2, #(MDCNFG_DE2 | MDCNFG_DE3) + + @ program banks 0/1 for bus width + @ + bic r2, r2, #MDCNFG_DWID0 @0=32-bit + + @ write initial value of mdcnfg, w/o enabling sdram banks + @ + str r2, [r1, #MDCNFG_OFFSET] + + @ Step 4e + @ pause for 200 uSecs + @ + ldr r3, =OSCR @ reset the OS Timer Count to zero + mov r2, #0 + str r2, [r3] + ldr r4, =0x300 @ really 0x2E1 is about 200usec, so 0x300 should be plenty + 1: + ldr r2, [r3] + cmp r4, r2 + bgt 1b + + /* Why is this here??? */ + mov r0, #0x78 @turn everything off + mcr p15, 0, r0, c1, c0, 0 @(caches off, MMU off, etc.) + + @ Step 4f + @ Access memory *not yet enabled* for CBR refresh cycles (8) + @ - CBR is generated for all banks + + ldr r2, =CFG_DRAM_BASE + str r2, [r2] + str r2, [r2] + str r2, [r2] + str r2, [r2] + str r2, [r2] + str r2, [r2] + str r2, [r2] + str r2, [r2] + + @ Step 4g + @get memory controller base address + @ + ldr r1, =MEMC_BASE + + @fetch current mdcnfg value + @ + ldr r3, [r1, #MDCNFG_OFFSET] + + @enable sdram bank 0 if installed (must do for any populated bank) + @ + orr r3, r3, #MDCNFG_DE0 + + @write back mdcnfg, enabling the sdram bank(s) + @ + str r3, [r1, #MDCNFG_OFFSET] + + @ Step 4h + @ write mdmrs + @ + ldr r2, =CFG_MDMRS_VAL + str r2, [r1, #MDMRS_OFFSET] + + @ Done Memory Init + + /*SET_LED 6 */ + + @******************************************************************** + @ Disable (mask) all interrupts at the interrupt controller + @ + + @ clear the interrupt level register (use IRQ, not FIQ) + @ + mov r1, #0 + ldr r2, =ICLR + str r1, [r2] + + @ Set interrupt mask register + @ + ldr r1, =CFG_ICMR_VAL + ldr r2, =ICMR + str r1, [r2] + + @ ******************************************************************** + @ Disable the peripheral clocks, and set the core clock + @ + + @ Turn Off ALL on-chip peripheral clocks for re-configuration + @ + ldr r1, =CKEN + mov r2, #0 + str r2, [r1] + + @ set core clocks + @ + ldr r2, =CFG_CCCR_VAL + ldr r1, =CCCR + str r2, [r1] + + #ifdef ENABLE32KHZ + @ enable the 32Khz oscillator for RTC and PowerManager + @ + ldr r1, =OSCC + mov r2, #OSCC_OON + str r2, [r1] + + @ NOTE: spin here until OSCC.OOK get set, + @ meaning the PLL has settled. + @ +60: + ldr r2, [r1] + ands r2, r2, #1 + beq 60b +#endif + + @ Turn on needed clocks + @ + ldr r1, =CKEN + ldr r2, =CFG_CKEN_VAL + str r2, [r1] + + /*SET_LED 7 */ + +/* Is this needed???? */ +#define NODEBUG +#ifdef NODEBUG + /*Disable software and data breakpoints */ + mov r0,#0 + mcr p15,0,r0,c14,c8,0 /* ibcr0 */ + mcr p15,0,r0,c14,c9,0 /* ibcr1 */ + mcr p15,0,r0,c14,c4,0 /* dbcon */ + + /*Enable all debug functionality */ + mov r0,#0x80000000 + mcr p14,0,r0,c10,c0,0 /* dcsr */ + +#endif + + mov pc, r10 + +@ End lowlevel_init diff --git a/board/pleb2/memsetup.S b/board/pleb2/memsetup.S deleted file mode 100644 index f2e1ce9d43..0000000000 --- a/board/pleb2/memsetup.S +++ /dev/null @@ -1,488 +0,0 @@ -/* - * Most of this taken from Redboot hal_platform_setup.h with cleanup - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -DRAM_SIZE: .long CFG_DRAM_SIZE - -/* wait for coprocessor write complete */ - .macro CPWAIT reg - mrc p15,0,\reg,c2,c0,0 - mov \reg,\reg - sub pc,pc,#4 - .endm - -.globl memsetup -memsetup: - - mov r10, lr - - /* Set up GPIO pins first */ - - ldr r0, =GPSR0 - ldr r1, =CFG_GPSR0_VAL - str r1, [r0] - - ldr r0, =GPSR1 - ldr r1, =CFG_GPSR1_VAL - str r1, [r0] - - ldr r0, =GPSR2 - ldr r1, =CFG_GPSR2_VAL - str r1, [r0] - - ldr r0, =GPCR0 - ldr r1, =CFG_GPCR0_VAL - str r1, [r0] - - ldr r0, =GPCR1 - ldr r1, =CFG_GPCR1_VAL - str r1, [r0] - - ldr r0, =GPCR2 - ldr r1, =CFG_GPCR2_VAL - str r1, [r0] - - ldr r0, =GRER0 - ldr r1, =CFG_GRER0_VAL - str r1, [r0] - - ldr r0, =GRER1 - ldr r1, =CFG_GRER1_VAL - str r1, [r0] - - ldr r0, =GRER2 - ldr r1, =CFG_GRER2_VAL - str r1, [r0] - - ldr r0, =GFER0 - ldr r1, =CFG_GFER0_VAL - str r1, [r0] - - ldr r0, =GFER1 - ldr r1, =CFG_GFER1_VAL - str r1, [r0] - - ldr r0, =GFER2 - ldr r1, =CFG_GFER2_VAL - str r1, [r0] - - ldr r0, =GPDR0 - ldr r1, =CFG_GPDR0_VAL - str r1, [r0] - - ldr r0, =GPDR1 - ldr r1, =CFG_GPDR1_VAL - str r1, [r0] - - ldr r0, =GPDR2 - ldr r1, =CFG_GPDR2_VAL - str r1, [r0] - - ldr r0, =GAFR0_L - ldr r1, =CFG_GAFR0_L_VAL - str r1, [r0] - - ldr r0, =GAFR0_U - ldr r1, =CFG_GAFR0_U_VAL - str r1, [r0] - - ldr r0, =GAFR1_L - ldr r1, =CFG_GAFR1_L_VAL - str r1, [r0] - - ldr r0, =GAFR1_U - ldr r1, =CFG_GAFR1_U_VAL - str r1, [r0] - - ldr r0, =GAFR2_L - ldr r1, =CFG_GAFR2_L_VAL - str r1, [r0] - - ldr r0, =GAFR2_U - ldr r1, =CFG_GAFR2_U_VAL - str r1, [r0] - - /* enable GPIO pins */ - ldr r0, =PSSR - ldr r1, =CFG_PSSR_VAL - str r1, [r0] - - -/********************************************************************* - Initlialize Memory Controller - - See PXA250 Operating System Developer's Guide - - pause for 200 uSecs- allow internal clocks to settle - *Note: only need this if hard reset... doing it anyway for now -*/ - - @ Step 1 - @ ---- Wait 200 usec - ldr r3, =OSCR @ reset the OS Timer Count to zero - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 @ really 0x2E1 is about 200usec, so 0x300 should be plenty -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - -mem_init: - @ get memory controller base address - ldr r1, =MEMC_BASE - -@**************************************************************************** -@ Step 2 -@ - - @ Step 2a - @ write msc0, read back to ensure data latches - @ - ldr r2, =CFG_MSC0_VAL - str r2, [r1, #MSC0_OFFSET] - ldr r2, [r1, #MSC0_OFFSET] - - @ write msc1 - ldr r2, =CFG_MSC1_VAL - str r2, [r1, #MSC1_OFFSET] - ldr r2, [r1, #MSC1_OFFSET] - - @ write msc2 - ldr r2, =CFG_MSC2_VAL - str r2, [r1, #MSC2_OFFSET] - ldr r2, [r1, #MSC2_OFFSET] - - -@ Step 2b - @ write mecr - ldr r2, =CFG_MECR_VAL - str r2, [r1, #MECR_OFFSET] - - @ write mcmem0 - ldr r2, =CFG_MCMEM0_VAL - str r2, [r1, #MCMEM0_OFFSET] - - @ write mcmem1 - ldr r2, =CFG_MCMEM1_VAL - str r2, [r1, #MCMEM1_OFFSET] - - @ write mcatt0 - ldr r2, =CFG_MCATT0_VAL - str r2, [r1, #MCATT0_OFFSET] - - @ write mcatt1 - ldr r2, =CFG_MCATT1_VAL - str r2, [r1, #MCATT1_OFFSET] - - @ write mcio0 - ldr r2, =CFG_MCIO0_VAL - str r2, [r1, #MCIO0_OFFSET] - - @ write mcio1 - ldr r2, =CFG_MCIO1_VAL - str r2, [r1, #MCIO1_OFFSET] - -@ Step 2c - @ fly-by-dma is defeatured on this part - @ write flycnfg - @ldr r2, =CFG_FLYCNFG_VAL - @str r2, [r1, #FLYCNFG_OFFSET] - -/* FIXME Does this sequence really make sense */ -#ifdef REDBOOT_WAY - @ Step 2d - @ get the mdrefr settings - ldr r3, =CFG_MDREFR_VAL - - @ extract DRI field (we need a valid DRI field) - @ - ldr r2, =0xFFF - - @ valid DRI field in r3 - @ - and r3, r3, r2 - - @ get the reset state of MDREFR - @ - ldr r4, [r1, #MDREFR_OFFSET] - - @ clear the DRI field - @ - bic r4, r4, r2 - - @ insert the valid DRI field loaded above - @ - orr r4, r4, r3 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - - @ *Note: preserve the mdrefr value in r4 * - -@**************************************************************************** -@ Step 3 -@ -@ NO SRAM - - mov pc, r10 - - -@**************************************************************************** -@ Step 4 -@ - - @ Assumes previous mdrefr value in r4, if not then read current mdrefr - - @ clear the free-running clock bits - @ (clear K0Free, K1Free, K2Free - @ - bic r4, r4, #(0x00800000 | 0x01000000 | 0x02000000) - - @ set K0RUN for CPLD clock - @ - orr r4, r4, #0x00002000 - - @ set K1RUN if bank 0 installed - @ - orr r4, r4, #0x00010000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - - @ deassert SLFRSH - @ - bic r4, r4, #0x00400000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - - @ assert E1PIN - @ - orr r4, r4, #0x00008000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - nop - nop -#else - @ Step 2d - @ get the mdrefr settings - ldr r3, =CFG_MDREFR_VAL - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - - @ Step 4 - - @ set K0RUN for CPLD clock - @ - orr r4, r4, #0x00002000 - - @ set K1RUN for bank 0 - @ - orr r4, r4, #0x00010000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - - @ deassert SLFRSH - @ - bic r4, r4, #0x00400000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - - @ assert E1PIN - @ - orr r4, r4, #0x00008000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - nop - nop -#endif - - @ Step 4d - @ fetch platform value of mdcnfg - @ - ldr r2, =CFG_MDCNFG_VAL - - @ disable all sdram banks - @ - bic r2, r2, #(MDCNFG_DE0 | MDCNFG_DE1) - bic r2, r2, #(MDCNFG_DE2 | MDCNFG_DE3) - - @ program banks 0/1 for bus width - @ - bic r2, r2, #MDCNFG_DWID0 @0=32-bit - - @ write initial value of mdcnfg, w/o enabling sdram banks - @ - str r2, [r1, #MDCNFG_OFFSET] - - @ Step 4e - @ pause for 200 uSecs - @ - ldr r3, =OSCR @ reset the OS Timer Count to zero - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 @ really 0x2E1 is about 200usec, so 0x300 should be plenty - 1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - - /* Why is this here??? */ - mov r0, #0x78 @turn everything off - mcr p15, 0, r0, c1, c0, 0 @(caches off, MMU off, etc.) - - @ Step 4f - @ Access memory *not yet enabled* for CBR refresh cycles (8) - @ - CBR is generated for all banks - - ldr r2, =CFG_DRAM_BASE - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - - @ Step 4g - @get memory controller base address - @ - ldr r1, =MEMC_BASE - - @fetch current mdcnfg value - @ - ldr r3, [r1, #MDCNFG_OFFSET] - - @enable sdram bank 0 if installed (must do for any populated bank) - @ - orr r3, r3, #MDCNFG_DE0 - - @write back mdcnfg, enabling the sdram bank(s) - @ - str r3, [r1, #MDCNFG_OFFSET] - - @ Step 4h - @ write mdmrs - @ - ldr r2, =CFG_MDMRS_VAL - str r2, [r1, #MDMRS_OFFSET] - - @ Done Memory Init - - /*SET_LED 6 */ - - @******************************************************************** - @ Disable (mask) all interrupts at the interrupt controller - @ - - @ clear the interrupt level register (use IRQ, not FIQ) - @ - mov r1, #0 - ldr r2, =ICLR - str r1, [r2] - - @ Set interrupt mask register - @ - ldr r1, =CFG_ICMR_VAL - ldr r2, =ICMR - str r1, [r2] - - @ ******************************************************************** - @ Disable the peripheral clocks, and set the core clock - @ - - @ Turn Off ALL on-chip peripheral clocks for re-configuration - @ - ldr r1, =CKEN - mov r2, #0 - str r2, [r1] - - @ set core clocks - @ - ldr r2, =CFG_CCCR_VAL - ldr r1, =CCCR - str r2, [r1] - - #ifdef ENABLE32KHZ - @ enable the 32Khz oscillator for RTC and PowerManager - @ - ldr r1, =OSCC - mov r2, #OSCC_OON - str r2, [r1] - - @ NOTE: spin here until OSCC.OOK get set, - @ meaning the PLL has settled. - @ -60: - ldr r2, [r1] - ands r2, r2, #1 - beq 60b -#endif - - @ Turn on needed clocks - @ - ldr r1, =CKEN - ldr r2, =CFG_CKEN_VAL - str r2, [r1] - - /*SET_LED 7 */ - -/* Is this needed???? */ -#define NODEBUG -#ifdef NODEBUG - /*Disable software and data breakpoints */ - mov r0,#0 - mcr p15,0,r0,c14,c8,0 /* ibcr0 */ - mcr p15,0,r0,c14,c9,0 /* ibcr1 */ - mcr p15,0,r0,c14,c4,0 /* dbcon */ - - /*Enable all debug functionality */ - mov r0,#0x80000000 - mcr p14,0,r0,c10,c0,0 /* dcsr */ - -#endif - - mov pc, r10 - -@ End memsetup diff --git a/board/purple/Makefile b/board/purple/Makefile index a9463b6215..b2f2fc0fd3 100644 --- a/board/purple/Makefile +++ b/board/purple/Makefile @@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS = $(BOARD).o flash.o sconsole.o -SOBJS = memsetup.o +SOBJS = lowlevel_init.o $(LIB): .depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) diff --git a/board/purple/lowlevel_init.S b/board/purple/lowlevel_init.S new file mode 100644 index 0000000000..668124a784 --- /dev/null +++ b/board/purple/lowlevel_init.S @@ -0,0 +1,37 @@ +/* + * Memory sub-system initialization code for PURPLE development board. + * + * Copyright (c) 2003 Wolfgang Denk + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#define MC_IOGP 0xBF800800 + + .globl lowlevel_init +lowlevel_init: + li t0, MC_IOGP + li t1, 0xf24 + sw t1, 0(t0) + j ra + nop diff --git a/board/purple/memsetup.S b/board/purple/memsetup.S deleted file mode 100644 index d532ceba82..0000000000 --- a/board/purple/memsetup.S +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Memory sub-system initialization code for PURPLE development board. - * - * Copyright (c) 2003 Wolfgang Denk - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -#define MC_IOGP 0xBF800800 - - .globl memsetup -memsetup: - li t0, MC_IOGP - li t1, 0xf24 - sw t1, 0(t0) - j ra - nop diff --git a/board/purple/u-boot.lds b/board/purple/u-boot.lds index 6263dd0052..aeea5d475e 100644 --- a/board/purple/u-boot.lds +++ b/board/purple/u-boot.lds @@ -35,7 +35,7 @@ SECTIONS .text : { cpu/mips/start.o (.text) - board/purple/memsetup.o (.text) + board/purple/lowlevel_init.o (.text) cpu/mips/cache.o (.text) common/main.o (.text) common/dlmalloc.o (.text) diff --git a/board/scb9328/Makefile b/board/scb9328/Makefile index 212efcc4e5..5dc3fd4e47 100644 --- a/board/scb9328/Makefile +++ b/board/scb9328/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := scb9328.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $^ diff --git a/board/scb9328/lowlevel_init.S b/board/scb9328/lowlevel_init.S new file mode 100644 index 0000000000..ba3b6d2418 --- /dev/null +++ b/board/scb9328/lowlevel_init.S @@ -0,0 +1,203 @@ +/* + * Copyright (C) 2004 Sascha Hauer, Synertronixx GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA + * 02111-1307, USA. + * + */ + +#include +#include +#include + +.globl lowlevel_init +lowlevel_init: + + mov r10, lr + +/* Change PERCLK1DIV to 14 ie 14+1 */ + ldr r0, =PCDR + ldr r1, =CFG_PCDR_VAL + str r1, [r0] + +/* set MCU PLL Control Register 0 */ + + ldr r0, =MPCTL0 + ldr r1, =CFG_MPCTL0_VAL + str r1, [r0] + +/* set mpll restart bit */ + ldr r0, =CSCR + ldr r1, [r0] + orr r1,r1,#(1<<21) + str r1, [r0] + + mov r2,#0x10 +1: + mov r3,#0x2000 +2: + subs r3,r3,#1 + bne 2b + + subs r2,r2,#1 + bne 1b + +/* set System PLL Control Register 0 */ + + ldr r0, =SPCTL0 + ldr r1, =CFG_SPCTL0_VAL + str r1, [r0] + +/* set spll restart bit */ + ldr r0, =CSCR + ldr r1, [r0] + orr r1,r1,#(1<<22) + str r1, [r0] + + mov r2,#0x10 +1: + mov r3,#0x2000 +2: + subs r3,r3,#1 + bne 2b + + subs r2,r2,#1 + bne 1b + + ldr r0, =CSCR + ldr r1, =CFG_CSCR_VAL + str r1, [r0] + +/* I have now read the ARM920 DataSheet back-to-Back, and have stumbled upon + *this..... + * + * It would appear that from a Cold-Boot the ARM920T enters "FastBus" mode CP15 + * register 1, this stops it using the output of the PLL and thus runs at the + * slow rate. Unless you place the Core into "Asynch" mode, the CPU will never + * use the value set in the CM_OSC registers...regardless of what you set it + * too! Thus, although i thought i was running at 140MHz, i'm actually running + * at 40!.. + + * Slapping this into my bootloader does the trick... + + * MRC p15,0,r0,c1,c0,0 ; read core configuration register + * ORR r0,r0,#0xC0000000 ; set asynchronous clocks and not fastbus mode + * MCR p15,0,r0,c1,c0,0 ; write modified value to core configuration + * register + */ + MRC p15,0,r0,c1,c0,0 + ORR r0,r0,#0xC0000000 + MCR p15,0,r0,c1,c0,0 + + ldr r0, =GPR(0) + ldr r1, =CFG_GPR_A_VAL + str r1, [r0] + + ldr r0, =GIUS(0) + ldr r1, =CFG_GIUS_A_VAL + str r1, [r0] + +/* CS3 becomes CS3 by clearing reset default bit 1 in FMCR */ + + ldr r0, =FMCR + ldr r1, =CFG_FMCR_VAL + str r1, [r0] + + ldr r0, =CS0U + ldr r1, =CFG_CS0U_VAL + str r1, [r0] + + ldr r0, =CS0L + ldr r1, =CFG_CS0L_VAL + str r1, [r0] + + ldr r0, =CS1U + ldr r1, =CFG_CS1U_VAL + str r1, [r0] + + ldr r0, =CS1L + ldr r1, =CFG_CS1L_VAL + str r1, [r0] + + ldr r0, =CS2U + ldr r1, =CFG_CS2U_VAL + str r1, [r0] + + ldr r0, =CS2L + ldr r1, =CFG_CS2L_VAL + str r1, [r0] + + ldr r0, =CS3U + ldr r1, =CFG_CS3U_VAL + str r1, [r0] + + ldr r0, =CS3L + ldr r1, =CFG_CS3L_VAL + str r1, [r0] + + ldr r0, =CS4U + ldr r1, =CFG_CS4U_VAL + str r1, [r0] + + ldr r0, =CS4L + ldr r1, =CFG_CS4L_VAL + str r1, [r0] + + ldr r0, =CS5U + ldr r1, =CFG_CS5U_VAL + str r1, [r0] + + ldr r0, =CS5L + ldr r1, =CFG_CS5L_VAL + str r1, [r0] + +/* SDRAM Setup */ + + ldr r0, =SDCTL0 + ldr r1, =PRECHARGE_CMD + str r1, [r0] + + ldr r0, =0x08200000 + ldr r1, =0x0 /* Issue Precharge all Command */ + str r1, [r0] + + ldr r0, =SDCTL0 + ldr r1, =AUTOREFRESH_CMD + str r1, [r0] + + ldr r0, =0x08000000 + ldr r1, =0x0 /* Issue AutoRefresh Command */ + str r1, [r0] + str r1, [r0] + str r1, [r0] + str r1, [r0] + str r1, [r0] + str r1, [r0] + str r1, [r0] + str r1, [r0] + + ldr r0, =SDCTL0 + ldr r1, =0xb10a8300 + str r1, [r0] + + ldr r0, =0x08223000 /* CAS Latency 2 */ + ldr r1, =0x0 /* Issue Mode Register Command, Burst Length = 8 */ + str r1, [r0] + + ldr r0, =SDCTL0 + ldr r1, =0x810a8200 /* Set to Normal Mode CAS 2 */ + str r1, [r0] + + mov pc,r10 diff --git a/board/scb9328/memsetup.S b/board/scb9328/memsetup.S deleted file mode 100644 index be5650a45f..0000000000 --- a/board/scb9328/memsetup.S +++ /dev/null @@ -1,203 +0,0 @@ -/* - * Copyright (C) 2004 Sascha Hauer, Synertronixx GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA - * 02111-1307, USA. - * - */ - -#include -#include -#include - -.globl memsetup -memsetup: - - mov r10, lr - -/* Change PERCLK1DIV to 14 ie 14+1 */ - ldr r0, =PCDR - ldr r1, =CFG_PCDR_VAL - str r1, [r0] - -/* set MCU PLL Control Register 0 */ - - ldr r0, =MPCTL0 - ldr r1, =CFG_MPCTL0_VAL - str r1, [r0] - -/* set mpll restart bit */ - ldr r0, =CSCR - ldr r1, [r0] - orr r1,r1,#(1<<21) - str r1, [r0] - - mov r2,#0x10 -1: - mov r3,#0x2000 -2: - subs r3,r3,#1 - bne 2b - - subs r2,r2,#1 - bne 1b - -/* set System PLL Control Register 0 */ - - ldr r0, =SPCTL0 - ldr r1, =CFG_SPCTL0_VAL - str r1, [r0] - -/* set spll restart bit */ - ldr r0, =CSCR - ldr r1, [r0] - orr r1,r1,#(1<<22) - str r1, [r0] - - mov r2,#0x10 -1: - mov r3,#0x2000 -2: - subs r3,r3,#1 - bne 2b - - subs r2,r2,#1 - bne 1b - - ldr r0, =CSCR - ldr r1, =CFG_CSCR_VAL - str r1, [r0] - -/* I have now read the ARM920 DataSheet back-to-Back, and have stumbled upon - *this..... - * - * It would appear that from a Cold-Boot the ARM920T enters "FastBus" mode CP15 - * register 1, this stops it using the output of the PLL and thus runs at the - * slow rate. Unless you place the Core into "Asynch" mode, the CPU will never - * use the value set in the CM_OSC registers...regardless of what you set it - * too! Thus, although i thought i was running at 140MHz, i'm actually running - * at 40!.. - - * Slapping this into my bootloader does the trick... - - * MRC p15,0,r0,c1,c0,0 ; read core configuration register - * ORR r0,r0,#0xC0000000 ; set asynchronous clocks and not fastbus mode - * MCR p15,0,r0,c1,c0,0 ; write modified value to core configuration - * register - */ - MRC p15,0,r0,c1,c0,0 - ORR r0,r0,#0xC0000000 - MCR p15,0,r0,c1,c0,0 - - ldr r0, =GPR(0) - ldr r1, =CFG_GPR_A_VAL - str r1, [r0] - - ldr r0, =GIUS(0) - ldr r1, =CFG_GIUS_A_VAL - str r1, [r0] - -/* CS3 becomes CS3 by clearing reset default bit 1 in FMCR */ - - ldr r0, =FMCR - ldr r1, =CFG_FMCR_VAL - str r1, [r0] - - ldr r0, =CS0U - ldr r1, =CFG_CS0U_VAL - str r1, [r0] - - ldr r0, =CS0L - ldr r1, =CFG_CS0L_VAL - str r1, [r0] - - ldr r0, =CS1U - ldr r1, =CFG_CS1U_VAL - str r1, [r0] - - ldr r0, =CS1L - ldr r1, =CFG_CS1L_VAL - str r1, [r0] - - ldr r0, =CS2U - ldr r1, =CFG_CS2U_VAL - str r1, [r0] - - ldr r0, =CS2L - ldr r1, =CFG_CS2L_VAL - str r1, [r0] - - ldr r0, =CS3U - ldr r1, =CFG_CS3U_VAL - str r1, [r0] - - ldr r0, =CS3L - ldr r1, =CFG_CS3L_VAL - str r1, [r0] - - ldr r0, =CS4U - ldr r1, =CFG_CS4U_VAL - str r1, [r0] - - ldr r0, =CS4L - ldr r1, =CFG_CS4L_VAL - str r1, [r0] - - ldr r0, =CS5U - ldr r1, =CFG_CS5U_VAL - str r1, [r0] - - ldr r0, =CS5L - ldr r1, =CFG_CS5L_VAL - str r1, [r0] - -/* SDRAM Setup */ - - ldr r0, =SDCTL0 - ldr r1, =PRECHARGE_CMD - str r1, [r0] - - ldr r0, =0x08200000 - ldr r1, =0x0 /* Issue Precharge all Command */ - str r1, [r0] - - ldr r0, =SDCTL0 - ldr r1, =AUTOREFRESH_CMD - str r1, [r0] - - ldr r0, =0x08000000 - ldr r1, =0x0 /* Issue AutoRefresh Command */ - str r1, [r0] - str r1, [r0] - str r1, [r0] - str r1, [r0] - str r1, [r0] - str r1, [r0] - str r1, [r0] - str r1, [r0] - - ldr r0, =SDCTL0 - ldr r1, =0xb10a8300 - str r1, [r0] - - ldr r0, =0x08223000 /* CAS Latency 2 */ - ldr r1, =0x0 /* Issue Mode Register Command, Burst Length = 8 */ - str r1, [r0] - - ldr r0, =SDCTL0 - ldr r1, =0x810a8200 /* Set to Normal Mode CAS 2 */ - str r1, [r0] - - mov pc,r10 diff --git a/board/shannon/Makefile b/board/shannon/Makefile index 86098a3053..f66b096a4f 100644 --- a/board/shannon/Makefile +++ b/board/shannon/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := shannon.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/shannon/lowlevel_init.S b/board/shannon/lowlevel_init.S new file mode 100644 index 0000000000..0655c42d3b --- /dev/null +++ b/board/shannon/lowlevel_init.S @@ -0,0 +1,92 @@ +/* + * Memory Setup stuff - taken from blob memsetup.S + * + * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and + * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include +#include + + +/* some parameters for the board */ + +MEM_BASE: .long 0xa0000000 +MEM_START: .long 0xc0000000 + +#define MDCNFG 0x00 +#define MDCAS0 0x04 +#define MDCAS1 0x08 +#define MDCAS2 0x0c +#define MSC0 0x10 +#define MSC1 0x14 +#define MECR 0x18 + +mdcas0: .long 0xc71c703f @ cccccccf +mdcas1: .long 0xffc71c71 @ fffffffc +mdcas2: .long 0xffffffff @ ffffffff +mdcnfg: .long 0x0334b21f @ 9326991f +msc0: .long 0xfff84458 @ 42304230 +msc1: .long 0xffffffff @ 20182018 +mecr: .long 0x7fff7fff @ 01000000 + +/* setting up the memory */ + +.globl lowlevel_init +lowlevel_init: + ldr r0, MEM_BASE + + /* Setup the flash memory */ + ldr r1, msc0 + str r1, [r0, #MSC0] + + /* Set up the DRAM */ + + /* MDCAS0 */ + ldr r1, mdcas0 + str r1, [r0, #MDCAS0] + + /* MDCAS1 */ + ldr r1, mdcas1 + str r1, [r0, #MDCAS1] + + /* MDCAS2 */ + ldr r1, mdcas2 + str r1, [r0, #MDCAS2] + + /* MDCNFG */ + ldr r1, mdcnfg + str r1, [r0, #MDCNFG] + + /* Set up PCMCIA space */ + ldr r1, mecr + str r1, [r0, #MECR] + + /* Load something to activate bank */ + ldr r1, MEM_START + +.rept 8 + ldr r0, [r1] +.endr + + /* everything is fine now */ + mov pc, lr diff --git a/board/shannon/memsetup.S b/board/shannon/memsetup.S deleted file mode 100644 index a9a8777d37..0000000000 --- a/board/shannon/memsetup.S +++ /dev/null @@ -1,92 +0,0 @@ -/* - * Memory Setup stuff - taken from blob memsetup.S - * - * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and - * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - -#include -#include - - -/* some parameters for the board */ - -MEM_BASE: .long 0xa0000000 -MEM_START: .long 0xc0000000 - -#define MDCNFG 0x00 -#define MDCAS0 0x04 -#define MDCAS1 0x08 -#define MDCAS2 0x0c -#define MSC0 0x10 -#define MSC1 0x14 -#define MECR 0x18 - -mdcas0: .long 0xc71c703f @ cccccccf -mdcas1: .long 0xffc71c71 @ fffffffc -mdcas2: .long 0xffffffff @ ffffffff -mdcnfg: .long 0x0334b21f @ 9326991f -msc0: .long 0xfff84458 @ 42304230 -msc1: .long 0xffffffff @ 20182018 -mecr: .long 0x7fff7fff @ 01000000 - -/* setting up the memory */ - -.globl memsetup -memsetup: - ldr r0, MEM_BASE - - /* Setup the flash memory */ - ldr r1, msc0 - str r1, [r0, #MSC0] - - /* Set up the DRAM */ - - /* MDCAS0 */ - ldr r1, mdcas0 - str r1, [r0, #MDCAS0] - - /* MDCAS1 */ - ldr r1, mdcas1 - str r1, [r0, #MDCAS1] - - /* MDCAS2 */ - ldr r1, mdcas2 - str r1, [r0, #MDCAS2] - - /* MDCNFG */ - ldr r1, mdcnfg - str r1, [r0, #MDCNFG] - - /* Set up PCMCIA space */ - ldr r1, mecr - str r1, [r0, #MECR] - - /* Load something to activate bank */ - ldr r1, MEM_START - -.rept 8 - ldr r0, [r1] -.endr - - /* everything is fine now */ - mov pc, lr diff --git a/board/smdk2400/Makefile b/board/smdk2400/Makefile index 367eabddbf..fc3d48faee 100644 --- a/board/smdk2400/Makefile +++ b/board/smdk2400/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := smdk2400.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/smdk2400/lowlevel_init.S b/board/smdk2400/lowlevel_init.S new file mode 100644 index 0000000000..a5de806af5 --- /dev/null +++ b/board/smdk2400/lowlevel_init.S @@ -0,0 +1,163 @@ +/* + * Memory Setup stuff - taken from blob memsetup.S + * + * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and + * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) + * + * Modified for the Samsung development board by + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include +#include + + +/* some parameters for the board */ + +/* + * + * Taken from linux/arch/arm/boot/compressed/head-s3c2400.S + * + * Copyright (C) 2001 Samsung Electronics by chc, 010406 + * + * S3C2400 specific tweaks. + * + */ + +/* memory controller */ +#define BWSCON 0x14000000 +#define BANKCON3 0x14000010 /* for cs8900, ethernet */ + +/* Bank0 */ +#define B0_Tacs 0x0 /* 0 clk */ +#define B0_Tcos 0x0 /* 0 clk */ +#define B0_Tacc 0x7 /* 14 clk */ +#define B0_Tcoh 0x0 /* 0 clk */ +#define B0_Tah 0x0 /* 0 clk */ +#define B0_Tacp 0x0 +#define B0_PMC 0x0 /* normal */ + +/* Bank1 */ +#define B1_Tacs 0x0 /* 0 clk */ +#define B1_Tcos 0x0 /* 0 clk */ +#define B1_Tacc 0x7 /* 14 clk */ +#define B1_Tcoh 0x0 /* 0 clk */ +#define B1_Tah 0x0 /* 0 clk */ +#define B1_Tacp 0x0 +#define B1_PMC 0x0 /* normal */ + +/* Bank2 */ +#define B2_Tacs 0x0 /* 0 clk */ +#define B2_Tcos 0x0 /* 0 clk */ +#define B2_Tacc 0x7 /* 14 clk */ +#define B2_Tcoh 0x0 /* 0 clk */ +#define B2_Tah 0x0 /* 0 clk */ +#define B2_Tacp 0x0 +#define B2_PMC 0x0 /* normal */ + +/* Bank3 - setup for the cs8900 */ +#define B3_Tacs 0x0 /* 0 clk */ +#define B3_Tcos 0x3 /* 4 clk */ +#define B3_Tacc 0x7 /* 14 clk */ +#define B3_Tcoh 0x1 /* 1 clk */ +#define B3_Tah 0x0 /* 0 clk */ +#define B3_Tacp 0x3 /* 6 clk */ +#define B3_PMC 0x0 /* normal */ + +/* Bank4 */ +#define B4_Tacs 0x0 /* 0 clk */ +#define B4_Tcos 0x0 /* 0 clk */ +#define B4_Tacc 0x7 /* 14 clk */ +#define B4_Tcoh 0x0 /* 0 clk */ +#define B4_Tah 0x0 /* 0 clk */ +#define B4_Tacp 0x0 +#define B4_PMC 0x0 /* normal */ + +/* Bank5 */ +#define B5_Tacs 0x0 /* 0 clk */ +#define B5_Tcos 0x0 /* 0 clk */ +#define B5_Tacc 0x7 /* 14 clk */ +#define B5_Tcoh 0x0 /* 0 clk */ +#define B5_Tah 0x0 /* 0 clk */ +#define B5_Tacp 0x0 +#define B5_PMC 0x0 /* normal */ + +/* Bank6 */ +#define B6_MT 0x3 /* SDRAM */ +#define B6_Trcd 0x1 /* 3clk */ +#define B6_SCAN 0x1 /* 9 bit */ + +/* Bank7 */ +#define B7_MT 0x3 /* SDRAM */ +#define B7_Trcd 0x1 /* 3clk */ +#define B7_SCAN 0x1 /* 9 bit */ + +/* refresh parameter */ +#define REFEN 0x1 /* enable refresh */ +#define TREFMD 0x0 /* CBR(CAS before RAS)/auto refresh */ +#define Trp 0x0 /* 2 clk */ +#define Trc 0x3 /* 7 clk */ +#define Tchr 0x2 /* 3 clk */ + +#define REFCNT 1113 /* period=15.6 us, HCLK=60Mhz, (2048+1-15.6*66) */ + + +_TEXT_BASE: + .word TEXT_BASE + +.globl lowlevel_init +lowlevel_init: + /* memory control configuration */ + /* make r0 relative the current location so that it */ + /* reads SMRDATA out of FLASH rather than memory ! */ + ldr r0, =SMRDATA + ldr r1, _TEXT_BASE + sub r0, r0, r1 + ldr r1, =BWSCON /* Bus Width Status Controller */ + add r2, r0, #52 +0: + ldr r3, [r0], #4 + str r3, [r1], #4 + cmp r2, r0 + bne 0b + + /* everything is fine now */ + mov pc, lr + + .ltorg +/* the literal pools origin */ + +SMRDATA: + .word 0x2211d114 /* d->Ethernet, BUSWIDTH=32 */ + .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) /* GCS0 */ + .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) /* GCS1 */ + .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) /* GCS2 */ + .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) /* GCS3 */ + .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) /* GCS4 */ + .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) /* GCS5 */ + .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) /* GCS6 */ + .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) /* GCS7 */ + .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) + .word 0x10 /* BUSWIDTH=32, SCLK power saving mode, BANKSIZE 32M/32M */ + .word 0x30 /* MRSR6, CL=3clk */ + .word 0x30 /* MRSR7 */ diff --git a/board/smdk2400/memsetup.S b/board/smdk2400/memsetup.S deleted file mode 100644 index b507d81259..0000000000 --- a/board/smdk2400/memsetup.S +++ /dev/null @@ -1,163 +0,0 @@ -/* - * Memory Setup stuff - taken from blob memsetup.S - * - * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and - * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) - * - * Modified for the Samsung development board by - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - -#include -#include - - -/* some parameters for the board */ - -/* - * - * Taken from linux/arch/arm/boot/compressed/head-s3c2400.S - * - * Copyright (C) 2001 Samsung Electronics by chc, 010406 - * - * S3C2400 specific tweaks. - * - */ - -/* memory controller */ -#define BWSCON 0x14000000 -#define BANKCON3 0x14000010 /* for cs8900, ethernet */ - -/* Bank0 */ -#define B0_Tacs 0x0 /* 0 clk */ -#define B0_Tcos 0x0 /* 0 clk */ -#define B0_Tacc 0x7 /* 14 clk */ -#define B0_Tcoh 0x0 /* 0 clk */ -#define B0_Tah 0x0 /* 0 clk */ -#define B0_Tacp 0x0 -#define B0_PMC 0x0 /* normal */ - -/* Bank1 */ -#define B1_Tacs 0x0 /* 0 clk */ -#define B1_Tcos 0x0 /* 0 clk */ -#define B1_Tacc 0x7 /* 14 clk */ -#define B1_Tcoh 0x0 /* 0 clk */ -#define B1_Tah 0x0 /* 0 clk */ -#define B1_Tacp 0x0 -#define B1_PMC 0x0 /* normal */ - -/* Bank2 */ -#define B2_Tacs 0x0 /* 0 clk */ -#define B2_Tcos 0x0 /* 0 clk */ -#define B2_Tacc 0x7 /* 14 clk */ -#define B2_Tcoh 0x0 /* 0 clk */ -#define B2_Tah 0x0 /* 0 clk */ -#define B2_Tacp 0x0 -#define B2_PMC 0x0 /* normal */ - -/* Bank3 - setup for the cs8900 */ -#define B3_Tacs 0x0 /* 0 clk */ -#define B3_Tcos 0x3 /* 4 clk */ -#define B3_Tacc 0x7 /* 14 clk */ -#define B3_Tcoh 0x1 /* 1 clk */ -#define B3_Tah 0x0 /* 0 clk */ -#define B3_Tacp 0x3 /* 6 clk */ -#define B3_PMC 0x0 /* normal */ - -/* Bank4 */ -#define B4_Tacs 0x0 /* 0 clk */ -#define B4_Tcos 0x0 /* 0 clk */ -#define B4_Tacc 0x7 /* 14 clk */ -#define B4_Tcoh 0x0 /* 0 clk */ -#define B4_Tah 0x0 /* 0 clk */ -#define B4_Tacp 0x0 -#define B4_PMC 0x0 /* normal */ - -/* Bank5 */ -#define B5_Tacs 0x0 /* 0 clk */ -#define B5_Tcos 0x0 /* 0 clk */ -#define B5_Tacc 0x7 /* 14 clk */ -#define B5_Tcoh 0x0 /* 0 clk */ -#define B5_Tah 0x0 /* 0 clk */ -#define B5_Tacp 0x0 -#define B5_PMC 0x0 /* normal */ - -/* Bank6 */ -#define B6_MT 0x3 /* SDRAM */ -#define B6_Trcd 0x1 /* 3clk */ -#define B6_SCAN 0x1 /* 9 bit */ - -/* Bank7 */ -#define B7_MT 0x3 /* SDRAM */ -#define B7_Trcd 0x1 /* 3clk */ -#define B7_SCAN 0x1 /* 9 bit */ - -/* refresh parameter */ -#define REFEN 0x1 /* enable refresh */ -#define TREFMD 0x0 /* CBR(CAS before RAS)/auto refresh */ -#define Trp 0x0 /* 2 clk */ -#define Trc 0x3 /* 7 clk */ -#define Tchr 0x2 /* 3 clk */ - -#define REFCNT 1113 /* period=15.6 us, HCLK=60Mhz, (2048+1-15.6*66) */ - - -_TEXT_BASE: - .word TEXT_BASE - -.globl memsetup -memsetup: - /* memory control configuration */ - /* make r0 relative the current location so that it */ - /* reads SMRDATA out of FLASH rather than memory ! */ - ldr r0, =SMRDATA - ldr r1, _TEXT_BASE - sub r0, r0, r1 - ldr r1, =BWSCON /* Bus Width Status Controller */ - add r2, r0, #52 -0: - ldr r3, [r0], #4 - str r3, [r1], #4 - cmp r2, r0 - bne 0b - - /* everything is fine now */ - mov pc, lr - - .ltorg -/* the literal pools origin */ - -SMRDATA: - .word 0x2211d114 /* d->Ethernet, BUSWIDTH=32 */ - .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) /* GCS0 */ - .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) /* GCS1 */ - .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) /* GCS2 */ - .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) /* GCS3 */ - .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) /* GCS4 */ - .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) /* GCS5 */ - .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) /* GCS6 */ - .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) /* GCS7 */ - .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) - .word 0x10 /* BUSWIDTH=32, SCLK power saving mode, BANKSIZE 32M/32M */ - .word 0x30 /* MRSR6, CL=3clk */ - .word 0x30 /* MRSR7 */ diff --git a/board/smdk2410/Makefile b/board/smdk2410/Makefile index af1e6e677e..4ee21f5977 100644 --- a/board/smdk2410/Makefile +++ b/board/smdk2410/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := smdk2410.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/smdk2410/lowlevel_init.S b/board/smdk2410/lowlevel_init.S new file mode 100644 index 0000000000..310f2a0a94 --- /dev/null +++ b/board/smdk2410/lowlevel_init.S @@ -0,0 +1,167 @@ +/* + * Memory Setup stuff - taken from blob memsetup.S + * + * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and + * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) + * + * Modified for the Samsung SMDK2410 by + * (C) Copyright 2002 + * David Mueller, ELSOFT AG, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include +#include + + +/* some parameters for the board */ + +/* + * + * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S + * + * Copyright (C) 2002 Samsung Electronics SW.LEE + * + */ + +#define BWSCON 0x48000000 + +/* BWSCON */ +#define DW8 (0x0) +#define DW16 (0x1) +#define DW32 (0x2) +#define WAIT (0x1<<2) +#define UBLB (0x1<<3) + +#define B1_BWSCON (DW32) +#define B2_BWSCON (DW16) +#define B3_BWSCON (DW16 + WAIT + UBLB) +#define B4_BWSCON (DW16) +#define B5_BWSCON (DW16) +#define B6_BWSCON (DW32) +#define B7_BWSCON (DW32) + +/* BANK0CON */ +#define B0_Tacs 0x0 /* 0clk */ +#define B0_Tcos 0x0 /* 0clk */ +#define B0_Tacc 0x7 /* 14clk */ +#define B0_Tcoh 0x0 /* 0clk */ +#define B0_Tah 0x0 /* 0clk */ +#define B0_Tacp 0x0 +#define B0_PMC 0x0 /* normal */ + +/* BANK1CON */ +#define B1_Tacs 0x0 /* 0clk */ +#define B1_Tcos 0x0 /* 0clk */ +#define B1_Tacc 0x7 /* 14clk */ +#define B1_Tcoh 0x0 /* 0clk */ +#define B1_Tah 0x0 /* 0clk */ +#define B1_Tacp 0x0 +#define B1_PMC 0x0 + +#define B2_Tacs 0x0 +#define B2_Tcos 0x0 +#define B2_Tacc 0x7 +#define B2_Tcoh 0x0 +#define B2_Tah 0x0 +#define B2_Tacp 0x0 +#define B2_PMC 0x0 + +#define B3_Tacs 0x0 /* 0clk */ +#define B3_Tcos 0x3 /* 4clk */ +#define B3_Tacc 0x7 /* 14clk */ +#define B3_Tcoh 0x1 /* 1clk */ +#define B3_Tah 0x0 /* 0clk */ +#define B3_Tacp 0x3 /* 6clk */ +#define B3_PMC 0x0 /* normal */ + +#define B4_Tacs 0x0 /* 0clk */ +#define B4_Tcos 0x0 /* 0clk */ +#define B4_Tacc 0x7 /* 14clk */ +#define B4_Tcoh 0x0 /* 0clk */ +#define B4_Tah 0x0 /* 0clk */ +#define B4_Tacp 0x0 +#define B4_PMC 0x0 /* normal */ + +#define B5_Tacs 0x0 /* 0clk */ +#define B5_Tcos 0x0 /* 0clk */ +#define B5_Tacc 0x7 /* 14clk */ +#define B5_Tcoh 0x0 /* 0clk */ +#define B5_Tah 0x0 /* 0clk */ +#define B5_Tacp 0x0 +#define B5_PMC 0x0 /* normal */ + +#define B6_MT 0x3 /* SDRAM */ +#define B6_Trcd 0x1 +#define B6_SCAN 0x1 /* 9bit */ + +#define B7_MT 0x3 /* SDRAM */ +#define B7_Trcd 0x1 /* 3clk */ +#define B7_SCAN 0x1 /* 9bit */ + +/* REFRESH parameter */ +#define REFEN 0x1 /* Refresh enable */ +#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */ +#define Trp 0x0 /* 2clk */ +#define Trc 0x3 /* 7clk */ +#define Tchr 0x2 /* 3clk */ +#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */ +/**************************************/ + +_TEXT_BASE: + .word TEXT_BASE + +.globl lowlevel_init +lowlevel_init: + /* memory control configuration */ + /* make r0 relative the current location so that it */ + /* reads SMRDATA out of FLASH rather than memory ! */ + ldr r0, =SMRDATA + ldr r1, _TEXT_BASE + sub r0, r0, r1 + ldr r1, =BWSCON /* Bus Width Status Controller */ + add r2, r0, #13*4 +0: + ldr r3, [r0], #4 + str r3, [r1], #4 + cmp r2, r0 + bne 0b + + /* everything is fine now */ + mov pc, lr + + .ltorg +/* the literal pools origin */ + +SMRDATA: + .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28)) + .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) + .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) + .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) + .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) + .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) + .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) + .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) + .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) + .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) + .word 0x32 + .word 0x30 + .word 0x30 diff --git a/board/smdk2410/memsetup.S b/board/smdk2410/memsetup.S deleted file mode 100644 index c00e772ff8..0000000000 --- a/board/smdk2410/memsetup.S +++ /dev/null @@ -1,167 +0,0 @@ -/* - * Memory Setup stuff - taken from blob memsetup.S - * - * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and - * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) - * - * Modified for the Samsung SMDK2410 by - * (C) Copyright 2002 - * David Mueller, ELSOFT AG, - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - -#include -#include - - -/* some parameters for the board */ - -/* - * - * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S - * - * Copyright (C) 2002 Samsung Electronics SW.LEE - * - */ - -#define BWSCON 0x48000000 - -/* BWSCON */ -#define DW8 (0x0) -#define DW16 (0x1) -#define DW32 (0x2) -#define WAIT (0x1<<2) -#define UBLB (0x1<<3) - -#define B1_BWSCON (DW32) -#define B2_BWSCON (DW16) -#define B3_BWSCON (DW16 + WAIT + UBLB) -#define B4_BWSCON (DW16) -#define B5_BWSCON (DW16) -#define B6_BWSCON (DW32) -#define B7_BWSCON (DW32) - -/* BANK0CON */ -#define B0_Tacs 0x0 /* 0clk */ -#define B0_Tcos 0x0 /* 0clk */ -#define B0_Tacc 0x7 /* 14clk */ -#define B0_Tcoh 0x0 /* 0clk */ -#define B0_Tah 0x0 /* 0clk */ -#define B0_Tacp 0x0 -#define B0_PMC 0x0 /* normal */ - -/* BANK1CON */ -#define B1_Tacs 0x0 /* 0clk */ -#define B1_Tcos 0x0 /* 0clk */ -#define B1_Tacc 0x7 /* 14clk */ -#define B1_Tcoh 0x0 /* 0clk */ -#define B1_Tah 0x0 /* 0clk */ -#define B1_Tacp 0x0 -#define B1_PMC 0x0 - -#define B2_Tacs 0x0 -#define B2_Tcos 0x0 -#define B2_Tacc 0x7 -#define B2_Tcoh 0x0 -#define B2_Tah 0x0 -#define B2_Tacp 0x0 -#define B2_PMC 0x0 - -#define B3_Tacs 0x0 /* 0clk */ -#define B3_Tcos 0x3 /* 4clk */ -#define B3_Tacc 0x7 /* 14clk */ -#define B3_Tcoh 0x1 /* 1clk */ -#define B3_Tah 0x0 /* 0clk */ -#define B3_Tacp 0x3 /* 6clk */ -#define B3_PMC 0x0 /* normal */ - -#define B4_Tacs 0x0 /* 0clk */ -#define B4_Tcos 0x0 /* 0clk */ -#define B4_Tacc 0x7 /* 14clk */ -#define B4_Tcoh 0x0 /* 0clk */ -#define B4_Tah 0x0 /* 0clk */ -#define B4_Tacp 0x0 -#define B4_PMC 0x0 /* normal */ - -#define B5_Tacs 0x0 /* 0clk */ -#define B5_Tcos 0x0 /* 0clk */ -#define B5_Tacc 0x7 /* 14clk */ -#define B5_Tcoh 0x0 /* 0clk */ -#define B5_Tah 0x0 /* 0clk */ -#define B5_Tacp 0x0 -#define B5_PMC 0x0 /* normal */ - -#define B6_MT 0x3 /* SDRAM */ -#define B6_Trcd 0x1 -#define B6_SCAN 0x1 /* 9bit */ - -#define B7_MT 0x3 /* SDRAM */ -#define B7_Trcd 0x1 /* 3clk */ -#define B7_SCAN 0x1 /* 9bit */ - -/* REFRESH parameter */ -#define REFEN 0x1 /* Refresh enable */ -#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */ -#define Trp 0x0 /* 2clk */ -#define Trc 0x3 /* 7clk */ -#define Tchr 0x2 /* 3clk */ -#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */ -/**************************************/ - -_TEXT_BASE: - .word TEXT_BASE - -.globl memsetup -memsetup: - /* memory control configuration */ - /* make r0 relative the current location so that it */ - /* reads SMRDATA out of FLASH rather than memory ! */ - ldr r0, =SMRDATA - ldr r1, _TEXT_BASE - sub r0, r0, r1 - ldr r1, =BWSCON /* Bus Width Status Controller */ - add r2, r0, #13*4 -0: - ldr r3, [r0], #4 - str r3, [r1], #4 - cmp r2, r0 - bne 0b - - /* everything is fine now */ - mov pc, lr - - .ltorg -/* the literal pools origin */ - -SMRDATA: - .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28)) - .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) - .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) - .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) - .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) - .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) - .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) - .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) - .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) - .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) - .word 0x32 - .word 0x30 - .word 0x30 diff --git a/board/tb0229/Makefile b/board/tb0229/Makefile index e7bb8cbe50..4375073af9 100644 --- a/board/tb0229/Makefile +++ b/board/tb0229/Makefile @@ -28,7 +28,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS = $(BOARD).o flash.o vr4131-pci.o -SOBJS = memsetup.o +SOBJS = lowlevel_init.o $(LIB): .depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/tb0229/lowlevel_init.S b/board/tb0229/lowlevel_init.S new file mode 100644 index 0000000000..df318067b9 --- /dev/null +++ b/board/tb0229/lowlevel_init.S @@ -0,0 +1,71 @@ +/* + * Memory sub-system initialization code for TANBAC Evaluation board TB0229. + * + * Copyright (c) 2003 Masami Komiya + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2, or (at + * your option) any later version. + */ + +#include +#include +#include + + + .globl lowlevel_init +lowlevel_init: + + /* BCUCNTREG1 = 0x0040 */ + la t0, 0xaf000000 + li t1, 0x0040 + sh t1, 0(t0) + + /* ROMSIZEREG = 0x3333 */ + la t0, 0xaf000004 + li t1, 0x3333 + sh t1, 0(t0) + + /* ROMSPEEDREG = 0x3003 */ + la t0, 0xaf000006 + li t1, 0x3003 + sh t1, 0(t0) + + /* BCUCNTREG3 = 0 */ + la t0, 0xaf000016 + li t1, 0x0000 + sh t1, 0(t0) + + /* CMUCLKMSK */ + la t0, 0xaf000060 + li t1, 0x39a2 + sh t1, 0(t0) + + /* PMUCNTREG */ + la t0, 0xaf0000c2 + li t1, 0x0006 + sh t1, 0(t0) + + /* SDRAMMODEREG = 0x8029 */ + la t0, 0xaf000400 + li t1, 0x8029 + sh t1, 0(t0) + + /* SDRAMCNTREG = 0x2322 */ + la t0, 0xaf000402 + li t1, 0x2322 + sh t1, 0(t0) + + /* BCURFCNTREG = 0x0106 */ + la t0, 0xaf000404 + li t1, 0x0106 + sh t1, 0(t0) + + /* RAMSZEREG = 0x5555 (64MB Bank) */ + la t0, 0xaf000408 + li t1, 0x5555 + sh t1, 0(t0) + + j ra + nop diff --git a/board/tb0229/memsetup.S b/board/tb0229/memsetup.S deleted file mode 100644 index 0eaf45dd59..0000000000 --- a/board/tb0229/memsetup.S +++ /dev/null @@ -1,71 +0,0 @@ -/* - * Memory sub-system initialization code for TANBAC Evaluation board TB0229. - * - * Copyright (c) 2003 Masami Komiya - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2, or (at - * your option) any later version. - */ - -#include -#include -#include - - - .globl memsetup -memsetup: - - /* BCUCNTREG1 = 0x0040 */ - la t0, 0xaf000000 - li t1, 0x0040 - sh t1, 0(t0) - - /* ROMSIZEREG = 0x3333 */ - la t0, 0xaf000004 - li t1, 0x3333 - sh t1, 0(t0) - - /* ROMSPEEDREG = 0x3003 */ - la t0, 0xaf000006 - li t1, 0x3003 - sh t1, 0(t0) - - /* BCUCNTREG3 = 0 */ - la t0, 0xaf000016 - li t1, 0x0000 - sh t1, 0(t0) - - /* CMUCLKMSK */ - la t0, 0xaf000060 - li t1, 0x39a2 - sh t1, 0(t0) - - /* PMUCNTREG */ - la t0, 0xaf0000c2 - li t1, 0x0006 - sh t1, 0(t0) - - /* SDRAMMODEREG = 0x8029 */ - la t0, 0xaf000400 - li t1, 0x8029 - sh t1, 0(t0) - - /* SDRAMCNTREG = 0x2322 */ - la t0, 0xaf000402 - li t1, 0x2322 - sh t1, 0(t0) - - /* BCURFCNTREG = 0x0106 */ - la t0, 0xaf000404 - li t1, 0x0106 - sh t1, 0(t0) - - /* RAMSZEREG = 0x5555 (64MB Bank) */ - la t0, 0xaf000408 - li t1, 0x5555 - sh t1, 0(t0) - - j ra - nop diff --git a/board/trab/Makefile b/board/trab/Makefile index 4e6e9d68cb..ced9bc5bc8 100644 --- a/board/trab/Makefile +++ b/board/trab/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := trab.o flash.o vfd.o cmd_trab.o memory.o tsc2000.o auto_update.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`) diff --git a/board/trab/lowlevel_init.S b/board/trab/lowlevel_init.S new file mode 100644 index 0000000000..128ae7e4aa --- /dev/null +++ b/board/trab/lowlevel_init.S @@ -0,0 +1,182 @@ +/* + * Memory Setup stuff - taken from blob memsetup.S + * + * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and + * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) + * + * Modified for the TRAB board by + * (C) Copyright 2002-2003 + * Gary Jennejohn, DENX Software Engineering, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include +#include + + +/* some parameters for the board */ + +/* + * + * Copied from linux/arch/arm/boot/compressed/head-s3c2400.S + * + * Copyright (C) 2001 Samsung Electronics by chc, 010406 + * + * TRAB specific tweaks. + * + */ + +/* memory controller */ +#define BWSCON 0x14000000 + +/* Bank0 */ +#define B0_Tacs 0x1 /* 1 clk */ +#define B0_Tcos 0x1 /* 1 clk */ +#define B0_Tacc 0x5 /* 8 clk */ +#define B0_Tcoh 0x1 /* 1 clk */ +#define B0_Tah 0x1 /* 1 clk */ +#define B0_Tacp 0x0 +#define B0_PMC 0x0 /* normal */ + +/* Bank1 - SRAM */ +#define B1_Tacs 0x1 /* 1 clk */ +#define B1_Tcos 0x1 /* 1 clk */ +#define B1_Tacc 0x5 /* 8 clk */ +#define B1_Tcoh 0x1 /* 1 clk */ +#define B1_Tah 0x1 /* 1 clk */ +#define B1_Tacp 0x0 +#define B1_PMC 0x0 /* normal */ + +/* Bank2 - CPLD */ +#define B2_Tacs 0x1 /* 1 clk */ +#define B2_Tcos 0x1 /* 1 clk */ +#define B2_Tacc 0x5 /* 8 clk */ +#define B2_Tcoh 0x1 /* 1 clk */ +#define B2_Tah 0x1 /* 1 clk */ +#define B2_Tacp 0x0 +#define B2_PMC 0x0 /* normal */ + +/* Bank3 - setup for the cs8900 */ +#define B3_Tacs 0x3 /* 4 clk */ +#define B3_Tcos 0x3 /* 4 clk */ +#define B3_Tacc 0x7 /* 14 clk */ +#define B3_Tcoh 0x1 /* 1 clk */ +#define B3_Tah 0x0 /* 0 clk */ +#define B3_Tacp 0x3 /* 6 clk */ +#define B3_PMC 0x0 /* normal */ + +/* Bank4 */ +#define B4_Tacs 0x0 /* 0 clk */ +#define B4_Tcos 0x0 /* 0 clk */ +#define B4_Tacc 0x7 /* 14 clk */ +#define B4_Tcoh 0x0 /* 0 clk */ +#define B4_Tah 0x0 /* 0 clk */ +#define B4_Tacp 0x0 +#define B4_PMC 0x0 /* normal */ + +/* Bank5 */ +#define B5_Tacs 0x0 /* 0 clk */ +#define B5_Tcos 0x0 /* 0 clk */ +#define B5_Tacc 0x7 /* 14 clk */ +#define B5_Tcoh 0x0 /* 0 clk */ +#define B5_Tah 0x0 /* 0 clk */ +#define B5_Tacp 0x0 +#define B5_PMC 0x0 /* normal */ + +#ifndef CONFIG_RAM_16MB /* 32 MB RAM */ +/* Bank6 */ +#define B6_MT 0x3 /* SDRAM */ +#define B6_Trcd 0x0 /* 2clk */ +#define B6_SCAN 0x1 /* 9 bit */ + +/* Bank7 */ +#define B7_MT 0x3 /* SDRAM */ +#define B7_Trcd 0x0 /* 2clk */ +#define B7_SCAN 0x1 /* 9 bit */ +#else /* CONFIG_RAM_16MB = 16 MB RAM */ +/* Bank6 */ +#define B6_MT 0x3 /* SDRAM */ +#define B6_Trcd 0x1 /* 2clk */ +#define B6_SCAN 0x0 /* 8 bit */ + +/* Bank7 */ +#define B7_MT 0x3 /* SDRAM */ +#define B7_Trcd 0x1 /* 2clk */ +#define B7_SCAN 0x0 /* 8 bit */ +#endif /* CONFIG_RAM_16MB */ + +/* refresh parameter */ +#define REFEN 0x1 /* enable refresh */ +#define TREFMD 0x0 /* CBR(CAS before RAS)/auto refresh */ +#define Trp 0x0 /* 2 clk */ +#define Trc 0x3 /* 7 clk */ +#define Tchr 0x2 /* 3 clk */ + +#ifdef CONFIG_TRAB_50MHZ +#define REFCNT 1269 /* period=15.6 us, HCLK=50Mhz, (2048+1-15.6*50) */ +#else +#define REFCNT 1011 /* period=15.6 us, HCLK=66.5Mhz, (2048+1-15.6*66.5) */ +#endif + + +_TEXT_BASE: + .word TEXT_BASE + +.globl lowlevel_init +lowlevel_init: + /* memory control configuration */ + /* make r0 relative the current location so that it */ + /* reads SMRDATA out of FLASH rather than memory ! */ + ldr r0, =SMRDATA + ldr r1, _TEXT_BASE + sub r0, r0, r1 + ldr r1, =BWSCON /* Bus Width Status Controller */ + add r2, r0, #52 +0: + ldr r3, [r0], #4 + str r3, [r1], #4 + cmp r2, r0 + bne 0b + + /* everything is fine now */ + mov pc, lr + + .ltorg +/* the literal pools origin */ + +SMRDATA: + .word 0x2211d644 /* d->Ethernet, 6->CPLD, 4->SRAM, 4->FLASH */ + .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) /* GCS0 */ + .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) /* GCS1 */ + .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) /* GCS2 */ + .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) /* GCS3 */ + .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) /* GCS4 */ + .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) /* GCS5 */ + .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) /* GCS6 */ + .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) /* GCS7 */ + .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) +#ifndef CONFIG_RAM_16MB /* 32 MB RAM */ + .word 0x10 /* BUSWIDTH=32, SCLK power saving mode, BANKSIZE 32M/32M */ +#else /* CONFIG_RAM_16MB = 16 MB RAM */ + .word 0x17 /* BUSWIDTH=32, SCLK power saving mode, BANKSIZE 16M/16M */ +#endif /* CONFIG_RAM_16MB */ + .word 0x20 /* MRSR6, CL=2clk */ + .word 0x20 /* MRSR7 */ diff --git a/board/trab/memsetup.S b/board/trab/memsetup.S deleted file mode 100644 index c93dff6706..0000000000 --- a/board/trab/memsetup.S +++ /dev/null @@ -1,182 +0,0 @@ -/* - * Memory Setup stuff - taken from blob memsetup.S - * - * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and - * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) - * - * Modified for the TRAB board by - * (C) Copyright 2002-2003 - * Gary Jennejohn, DENX Software Engineering, - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - -#include -#include - - -/* some parameters for the board */ - -/* - * - * Copied from linux/arch/arm/boot/compressed/head-s3c2400.S - * - * Copyright (C) 2001 Samsung Electronics by chc, 010406 - * - * TRAB specific tweaks. - * - */ - -/* memory controller */ -#define BWSCON 0x14000000 - -/* Bank0 */ -#define B0_Tacs 0x1 /* 1 clk */ -#define B0_Tcos 0x1 /* 1 clk */ -#define B0_Tacc 0x5 /* 8 clk */ -#define B0_Tcoh 0x1 /* 1 clk */ -#define B0_Tah 0x1 /* 1 clk */ -#define B0_Tacp 0x0 -#define B0_PMC 0x0 /* normal */ - -/* Bank1 - SRAM */ -#define B1_Tacs 0x1 /* 1 clk */ -#define B1_Tcos 0x1 /* 1 clk */ -#define B1_Tacc 0x5 /* 8 clk */ -#define B1_Tcoh 0x1 /* 1 clk */ -#define B1_Tah 0x1 /* 1 clk */ -#define B1_Tacp 0x0 -#define B1_PMC 0x0 /* normal */ - -/* Bank2 - CPLD */ -#define B2_Tacs 0x1 /* 1 clk */ -#define B2_Tcos 0x1 /* 1 clk */ -#define B2_Tacc 0x5 /* 8 clk */ -#define B2_Tcoh 0x1 /* 1 clk */ -#define B2_Tah 0x1 /* 1 clk */ -#define B2_Tacp 0x0 -#define B2_PMC 0x0 /* normal */ - -/* Bank3 - setup for the cs8900 */ -#define B3_Tacs 0x3 /* 4 clk */ -#define B3_Tcos 0x3 /* 4 clk */ -#define B3_Tacc 0x7 /* 14 clk */ -#define B3_Tcoh 0x1 /* 1 clk */ -#define B3_Tah 0x0 /* 0 clk */ -#define B3_Tacp 0x3 /* 6 clk */ -#define B3_PMC 0x0 /* normal */ - -/* Bank4 */ -#define B4_Tacs 0x0 /* 0 clk */ -#define B4_Tcos 0x0 /* 0 clk */ -#define B4_Tacc 0x7 /* 14 clk */ -#define B4_Tcoh 0x0 /* 0 clk */ -#define B4_Tah 0x0 /* 0 clk */ -#define B4_Tacp 0x0 -#define B4_PMC 0x0 /* normal */ - -/* Bank5 */ -#define B5_Tacs 0x0 /* 0 clk */ -#define B5_Tcos 0x0 /* 0 clk */ -#define B5_Tacc 0x7 /* 14 clk */ -#define B5_Tcoh 0x0 /* 0 clk */ -#define B5_Tah 0x0 /* 0 clk */ -#define B5_Tacp 0x0 -#define B5_PMC 0x0 /* normal */ - -#ifndef CONFIG_RAM_16MB /* 32 MB RAM */ -/* Bank6 */ -#define B6_MT 0x3 /* SDRAM */ -#define B6_Trcd 0x0 /* 2clk */ -#define B6_SCAN 0x1 /* 9 bit */ - -/* Bank7 */ -#define B7_MT 0x3 /* SDRAM */ -#define B7_Trcd 0x0 /* 2clk */ -#define B7_SCAN 0x1 /* 9 bit */ -#else /* CONFIG_RAM_16MB = 16 MB RAM */ -/* Bank6 */ -#define B6_MT 0x3 /* SDRAM */ -#define B6_Trcd 0x1 /* 2clk */ -#define B6_SCAN 0x0 /* 8 bit */ - -/* Bank7 */ -#define B7_MT 0x3 /* SDRAM */ -#define B7_Trcd 0x1 /* 2clk */ -#define B7_SCAN 0x0 /* 8 bit */ -#endif /* CONFIG_RAM_16MB */ - -/* refresh parameter */ -#define REFEN 0x1 /* enable refresh */ -#define TREFMD 0x0 /* CBR(CAS before RAS)/auto refresh */ -#define Trp 0x0 /* 2 clk */ -#define Trc 0x3 /* 7 clk */ -#define Tchr 0x2 /* 3 clk */ - -#ifdef CONFIG_TRAB_50MHZ -#define REFCNT 1269 /* period=15.6 us, HCLK=50Mhz, (2048+1-15.6*50) */ -#else -#define REFCNT 1011 /* period=15.6 us, HCLK=66.5Mhz, (2048+1-15.6*66.5) */ -#endif - - -_TEXT_BASE: - .word TEXT_BASE - -.globl memsetup -memsetup: - /* memory control configuration */ - /* make r0 relative the current location so that it */ - /* reads SMRDATA out of FLASH rather than memory ! */ - ldr r0, =SMRDATA - ldr r1, _TEXT_BASE - sub r0, r0, r1 - ldr r1, =BWSCON /* Bus Width Status Controller */ - add r2, r0, #52 -0: - ldr r3, [r0], #4 - str r3, [r1], #4 - cmp r2, r0 - bne 0b - - /* everything is fine now */ - mov pc, lr - - .ltorg -/* the literal pools origin */ - -SMRDATA: - .word 0x2211d644 /* d->Ethernet, 6->CPLD, 4->SRAM, 4->FLASH */ - .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) /* GCS0 */ - .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) /* GCS1 */ - .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) /* GCS2 */ - .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) /* GCS3 */ - .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) /* GCS4 */ - .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) /* GCS5 */ - .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) /* GCS6 */ - .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) /* GCS7 */ - .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) -#ifndef CONFIG_RAM_16MB /* 32 MB RAM */ - .word 0x10 /* BUSWIDTH=32, SCLK power saving mode, BANKSIZE 32M/32M */ -#else /* CONFIG_RAM_16MB = 16 MB RAM */ - .word 0x17 /* BUSWIDTH=32, SCLK power saving mode, BANKSIZE 16M/16M */ -#endif /* CONFIG_RAM_16MB */ - .word 0x20 /* MRSR6, CL=2clk */ - .word 0x20 /* MRSR7 */ diff --git a/board/wepep250/Makefile b/board/wepep250/Makefile index 802ccb950f..11ad8fbecc 100644 --- a/board/wepep250/Makefile +++ b/board/wepep250/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := wepep250.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/wepep250/lowlevel_init.S b/board/wepep250/lowlevel_init.S new file mode 100644 index 0000000000..b172ceaa61 --- /dev/null +++ b/board/wepep250/lowlevel_init.S @@ -0,0 +1,145 @@ +/* + * Copyright (C) 2001, 2002 ETC s.r.o. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA + * 02111-1307, USA. + * + * Written by Marcel Telka , 2001, 2002. + * Changes for U-Boot Peter Figuli , 2003. + * + * This file is taken from OpenWinCE project hosted by SourceForge.net + * + * Documentation: + * [1] Intel Corporation, "Intel PXA250 and PXA210 Application Processors + * Developer's Manual", February 2002, Order Number: 278522-001 + * [2] Samsung Electronics, "8Mx16 SDRAM 54CSP K4S281633D-RL/N/P", + * Revision 1.0, February 2002 + * [3] Samsung Electronics, "16Mx16 SDRAM 54CSP K4S561633C-RL(N)", + * Revision 1.0, February 2002 + * +*/ + +#include +#include +#include + +.globl lowlevel_init +lowlevel_init: + + mov r10, lr + +/* setup memory - see 6.12 in [1] + * Step 1 - wait 200 us + */ + mov r0,#0x2700 /* wait 200 us @ 99.5 MHz */ +1: subs r0, r0, #1 + bne 1b +/* TODO: complete step 1 for Synchronous Static memory*/ + + ldr r0, =0x48000000 /* MC_BASE */ + + +/* step 1.a - setup MSCx + */ + ldr r1, =0x000012B3 /* MSC0_RRR0(1) | MSC0_RDN0(2) | MSC0_RDF0(11) | MSC0_RT0(3) */ + str r1, [r0, #0x8] /* MSC0_OFFSET */ + +/* step 1.c - clear MDREFR:K1FREE, set MDREFR:DRI + * see AUTO REFRESH chapter in section D. in [2] and in [3] + * DRI = (64ms / 4096) * 99.53MHz / 32 = 48 for K4S281633 + * DRI = (64ms / 8192) * 99.52MHz / 32 = 24 for K4S561633 + * TODO: complete for Synchronous Static memory + */ + ldr r1, [r0, #4] /* MDREFR_OFFSET */ + ldr r2, =0x01000FFF /* MDREFR_K1FREE | MDREFR_DRI_MASK */ + bic r1, r1, r2 +#if defined( WEP_SDRAM_K4S281633 ) + orr r1, r1, #48 /* MDREFR_DRI(48) */ +#elif defined( WEP_SDRAM_K4S561633 ) + orr r1, r1, #24 /* MDREFR_DRI(24) */ +#else +#error SDRAM chip is not defined +#endif + + str r1, [r0, #4] /* MDREFR_OFFSET */ + +/* Step 2 - only for Synchronous Static memory (TODO) + * + * Step 3 - same as step 4 + * + * Step 4 + * + * Step 4.a - set MDREFR:K1RUN, clear MDREFR:K1DB2 + */ + orr r1, r1, #0x00010000 /* MDREFR_K1RUN */ + bic r1, r1, #0x00020000 /* MDREFR_K1DB2 */ + str r1, [r0, #4] /* MDREFR_OFFSET */ + +/* Step 4.b - clear MDREFR:SLFRSH */ + bic r1, r1, #0x00400000 /* MDREFR_SLFRSH */ + str r1, [r0, #4] /* MDREFR_OFFSET */ + +/* Step 4.c - set MDREFR:E1PIN */ + orr r1, r1, #0x00008000 /* MDREFR_E1PIN */ + str r1, [r0, #4] /* MDREFR_OFFSET */ + +/* Step 4.d - automatically done + * + * Steps 4.e and 4.f - configure SDRAM + */ +#if defined( WEP_SDRAM_K4S281633 ) + ldr r1, =0x00000AA8 /* MDCNFG_DTC0(2) | MDCNFG_DLATCH0 | MDCNFG_DCAC0(1) | MDCNFG_DRAC0(1) | MDCNFG_DNB0 */ +#elif defined( WEP_SDRAM_K4S561633 ) + ldr r1, =0x00000AC8 /* MDCNFG_DTC0(2) | MDCNFG_DLATCH0 | MDCNFG_DCAC0(1) | MDCNFG_DRAC0(2) | MDCNFG_DNB0 */ +#else +#error SDRAM chip is not defined +#endif + str r1, [r0, #0] /* MDCNFG_OFFSET */ + +/* Step 5 - wait at least 200 us for SDRAM + * see section B. in [2] + */ + mov r2,#0x2700 /* wait 200 us @ 99.5 MHz */ +1: subs r2, r2, #1 + bne 1b + +/* Step 6 - after reset dcache is disabled, so automatically done + * + * Step 7 - eight refresh cycles + */ + mov r2, #0xA0000000 + ldr r3, [r2] + ldr r3, [r2] + ldr r3, [r2] + ldr r3, [r2] + ldr r3, [r2] + ldr r3, [r2] + ldr r3, [r2] + ldr r3, [r2] + +/* Step 8 - we don't need dcache now + * + * Step 9 - enable SDRAM partition 0 + */ + orr r1, r1, #1 /* MDCNFG_DE0 */ + str r1, [r0, #0] /* MDCNFG_OFFSET */ + +/* Step 10 - write MDMRS */ + mov r1, #0 + str r1, [r0, #0x40] /* MDMRS_OFFSET */ + +/* Step 11 - optional (TODO) */ + + mov pc,r10 diff --git a/board/wepep250/memsetup.S b/board/wepep250/memsetup.S deleted file mode 100644 index 26fc0eaf25..0000000000 --- a/board/wepep250/memsetup.S +++ /dev/null @@ -1,145 +0,0 @@ -/* - * Copyright (C) 2001, 2002 ETC s.r.o. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA - * 02111-1307, USA. - * - * Written by Marcel Telka , 2001, 2002. - * Changes for U-Boot Peter Figuli , 2003. - * - * This file is taken from OpenWinCE project hosted by SourceForge.net - * - * Documentation: - * [1] Intel Corporation, "Intel PXA250 and PXA210 Application Processors - * Developer's Manual", February 2002, Order Number: 278522-001 - * [2] Samsung Electronics, "8Mx16 SDRAM 54CSP K4S281633D-RL/N/P", - * Revision 1.0, February 2002 - * [3] Samsung Electronics, "16Mx16 SDRAM 54CSP K4S561633C-RL(N)", - * Revision 1.0, February 2002 - * -*/ - -#include -#include -#include - -.globl memsetup -memsetup: - - mov r10, lr - -/* setup memory - see 6.12 in [1] - * Step 1 - wait 200 us - */ - mov r0,#0x2700 /* wait 200 us @ 99.5 MHz */ -1: subs r0, r0, #1 - bne 1b -/* TODO: complete step 1 for Synchronous Static memory*/ - - ldr r0, =0x48000000 /* MC_BASE */ - - -/* step 1.a - setup MSCx - */ - ldr r1, =0x000012B3 /* MSC0_RRR0(1) | MSC0_RDN0(2) | MSC0_RDF0(11) | MSC0_RT0(3) */ - str r1, [r0, #0x8] /* MSC0_OFFSET */ - -/* step 1.c - clear MDREFR:K1FREE, set MDREFR:DRI - * see AUTO REFRESH chapter in section D. in [2] and in [3] - * DRI = (64ms / 4096) * 99.53MHz / 32 = 48 for K4S281633 - * DRI = (64ms / 8192) * 99.52MHz / 32 = 24 for K4S561633 - * TODO: complete for Synchronous Static memory - */ - ldr r1, [r0, #4] /* MDREFR_OFFSET */ - ldr r2, =0x01000FFF /* MDREFR_K1FREE | MDREFR_DRI_MASK */ - bic r1, r1, r2 -#if defined( WEP_SDRAM_K4S281633 ) - orr r1, r1, #48 /* MDREFR_DRI(48) */ -#elif defined( WEP_SDRAM_K4S561633 ) - orr r1, r1, #24 /* MDREFR_DRI(24) */ -#else -#error SDRAM chip is not defined -#endif - - str r1, [r0, #4] /* MDREFR_OFFSET */ - -/* Step 2 - only for Synchronous Static memory (TODO) - * - * Step 3 - same as step 4 - * - * Step 4 - * - * Step 4.a - set MDREFR:K1RUN, clear MDREFR:K1DB2 - */ - orr r1, r1, #0x00010000 /* MDREFR_K1RUN */ - bic r1, r1, #0x00020000 /* MDREFR_K1DB2 */ - str r1, [r0, #4] /* MDREFR_OFFSET */ - -/* Step 4.b - clear MDREFR:SLFRSH */ - bic r1, r1, #0x00400000 /* MDREFR_SLFRSH */ - str r1, [r0, #4] /* MDREFR_OFFSET */ - -/* Step 4.c - set MDREFR:E1PIN */ - orr r1, r1, #0x00008000 /* MDREFR_E1PIN */ - str r1, [r0, #4] /* MDREFR_OFFSET */ - -/* Step 4.d - automatically done - * - * Steps 4.e and 4.f - configure SDRAM - */ -#if defined( WEP_SDRAM_K4S281633 ) - ldr r1, =0x00000AA8 /* MDCNFG_DTC0(2) | MDCNFG_DLATCH0 | MDCNFG_DCAC0(1) | MDCNFG_DRAC0(1) | MDCNFG_DNB0 */ -#elif defined( WEP_SDRAM_K4S561633 ) - ldr r1, =0x00000AC8 /* MDCNFG_DTC0(2) | MDCNFG_DLATCH0 | MDCNFG_DCAC0(1) | MDCNFG_DRAC0(2) | MDCNFG_DNB0 */ -#else -#error SDRAM chip is not defined -#endif - str r1, [r0, #0] /* MDCNFG_OFFSET */ - -/* Step 5 - wait at least 200 us for SDRAM - * see section B. in [2] - */ - mov r2,#0x2700 /* wait 200 us @ 99.5 MHz */ -1: subs r2, r2, #1 - bne 1b - -/* Step 6 - after reset dcache is disabled, so automatically done - * - * Step 7 - eight refresh cycles - */ - mov r2, #0xA0000000 - ldr r3, [r2] - ldr r3, [r2] - ldr r3, [r2] - ldr r3, [r2] - ldr r3, [r2] - ldr r3, [r2] - ldr r3, [r2] - ldr r3, [r2] - -/* Step 8 - we don't need dcache now - * - * Step 9 - enable SDRAM partition 0 - */ - orr r1, r1, #1 /* MDCNFG_DE0 */ - str r1, [r0, #0] /* MDCNFG_OFFSET */ - -/* Step 10 - write MDMRS */ - mov r1, #0 - str r1, [r0, #0x40] /* MDMRS_OFFSET */ - -/* Step 11 - optional (TODO) */ - - mov pc,r10 diff --git a/board/xaeniax/Makefile b/board/xaeniax/Makefile index da5a5bad3b..7c5f0cd1a1 100644 --- a/board/xaeniax/Makefile +++ b/board/xaeniax/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := xaeniax.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/xaeniax/lowlevel_init.S b/board/xaeniax/lowlevel_init.S new file mode 100644 index 0000000000..fe3e7128a4 --- /dev/null +++ b/board/xaeniax/lowlevel_init.S @@ -0,0 +1,424 @@ + /* + * Most of this taken from Redboot hal_platform_setup.h with cleanup + * + * NOTE: I haven't clean this up considerably, just enough to get it + * running. See hal_platform_setup.h for the source. See + * board/cradle/lowlevel_init.S for another PXA250 setup that is + * much cleaner. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +DRAM_SIZE: .long CFG_DRAM_SIZE + +/* wait for coprocessor write complete */ + .macro CPWAIT reg + mrc p15,0,\reg,c2,c0,0 + mov \reg,\reg + sub pc,pc,#4 + .endm + + +.globl lowlevel_init +lowlevel_init: + + mov r10, lr + + /* Set up GPIO pins first ----------------------------------------- */ + + ldr r0,=GPSR0 + ldr r1,=CFG_GPSR0_VAL + str r1,[r0] + + ldr r0,=GPSR1 + ldr r1,=CFG_GPSR1_VAL + str r1,[r0] + + ldr r0,=GPSR2 + ldr r1,=CFG_GPSR2_VAL + str r1,[r0] + + ldr r0,=GPCR0 + ldr r1,=CFG_GPCR0_VAL + str r1,[r0] + + ldr r0,=GPCR1 + ldr r1,=CFG_GPCR1_VAL + str r1,[r0] + + ldr r0,=GPCR2 + ldr r1,=CFG_GPCR2_VAL + str r1,[r0] + + ldr r0,=GPDR0 + ldr r1,=CFG_GPDR0_VAL + str r1,[r0] + + ldr r0,=GPDR1 + ldr r1,=CFG_GPDR1_VAL + str r1,[r0] + + ldr r0,=GPDR2 + ldr r1,=CFG_GPDR2_VAL + str r1,[r0] + + ldr r0,=GAFR0_L + ldr r1,=CFG_GAFR0_L_VAL + str r1,[r0] + + ldr r0,=GAFR0_U + ldr r1,=CFG_GAFR0_U_VAL + str r1,[r0] + + ldr r0,=GAFR1_L + ldr r1,=CFG_GAFR1_L_VAL + str r1,[r0] + + ldr r0,=GAFR1_U + ldr r1,=CFG_GAFR1_U_VAL + str r1,[r0] + + ldr r0,=GAFR2_L + ldr r1,=CFG_GAFR2_L_VAL + str r1,[r0] + + ldr r0,=GAFR2_U + ldr r1,=CFG_GAFR2_U_VAL + str r1,[r0] + + ldr r0,=PSSR /* enable GPIO pins */ + ldr r1,=CFG_PSSR_VAL + str r1,[r0] + + /* ---------------------------------------------------------------- */ + /* Enable memory interface */ + /* */ + /* The sequence below is based on the recommended init steps */ + /* detailed in the Intel PXA250 Operating Systems Developers Guide, */ + /* Chapter 10. */ + /* ---------------------------------------------------------------- */ + + /* ---------------------------------------------------------------- */ + /* Step 1: Wait for at least 200 microsedonds to allow internal */ + /* clocks to settle. Only necessary after hard reset... */ + /* FIXME: can be optimized later */ + /* ---------------------------------------------------------------- */ + + ldr r3, =OSCR /* reset the OS Timer Count to zero */ + mov r2, #0 + str r2, [r3] + ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ + /* so 0x300 should be plenty */ +1: + ldr r2, [r3] + cmp r4, r2 + bgt 1b + +mem_init: + + ldr r1,=MEMC_BASE /* get memory controller base addr. */ + + /* ---------------------------------------------------------------- */ + /* Step 2a: Initialize Asynchronous static memory controller */ + /* ---------------------------------------------------------------- */ + + /* MSC registers: timing, bus width, mem type */ + + /* MSC0: nCS(0,1) */ + ldr r2,=CFG_MSC0_VAL + str r2,[r1, #MSC0_OFFSET] + ldr r2,[r1, #MSC0_OFFSET] /* read back to ensure data latches */ + + /* MSC1: nCS(2,3) */ + ldr r2,=CFG_MSC1_VAL + str r2,[r1, #MSC1_OFFSET] + ldr r2,[r1, #MSC1_OFFSET] + + /* MSC2: nCS(4,5) */ + ldr r2,=CFG_MSC2_VAL + str r2,[r1, #MSC2_OFFSET] + ldr r2,[r1, #MSC2_OFFSET] + + /* ---------------------------------------------------------------- */ + /* Step 2b: Initialize Card Interface */ + /* ---------------------------------------------------------------- */ + + /* MECR: Memory Expansion Card Register */ + ldr r2,=CFG_MECR_VAL + str r2,[r1, #MECR_OFFSET] + ldr r2,[r1, #MECR_OFFSET] + + /* MCMEM0: Card Interface slot 0 timing */ + ldr r2,=CFG_MCMEM0_VAL + str r2,[r1, #MCMEM0_OFFSET] + ldr r2,[r1, #MCMEM0_OFFSET] + + /* MCMEM1: Card Interface slot 1 timing */ + ldr r2,=CFG_MCMEM1_VAL + str r2,[r1, #MCMEM1_OFFSET] + ldr r2,[r1, #MCMEM1_OFFSET] + + /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ + ldr r2,=CFG_MCATT0_VAL + str r2,[r1, #MCATT0_OFFSET] + ldr r2,[r1, #MCATT0_OFFSET] + + /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ + ldr r2,=CFG_MCATT1_VAL + str r2,[r1, #MCATT1_OFFSET] + ldr r2,[r1, #MCATT1_OFFSET] + + /* MCIO0: Card Interface I/O Space Timing, slot 0 */ + ldr r2,=CFG_MCIO0_VAL + str r2,[r1, #MCIO0_OFFSET] + ldr r2,[r1, #MCIO0_OFFSET] + + /* MCIO1: Card Interface I/O Space Timing, slot 1 */ + ldr r2,=CFG_MCIO1_VAL + str r2,[r1, #MCIO1_OFFSET] + ldr r2,[r1, #MCIO1_OFFSET] + + /* ---------------------------------------------------------------- */ + /* Step 2c: Write FLYCNFG FIXME: what's that??? */ + /* ---------------------------------------------------------------- */ + + /* ---------------------------------------------------------------- */ + /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */ + /* ---------------------------------------------------------------- */ + + @ get the mdrefr settings + ldr r4,=CFG_MDREFR_VAL + + @ write back mdrefr + str r4,[r1, #MDREFR_OFFSET] + ldr r4,[r1, #MDREFR_OFFSET] + + /* ---------------------------------------------------------------- */ + /* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */ + /* ---------------------------------------------------------------- */ + + /* Initialize SXCNFG register. Assert the enable bits */ + + /* Write SXMRS to cause an MRS command to all enabled banks of */ + /* synchronous static memory. Note that SXLCR need not be written */ + /* at this time. */ + + /* FIXME: we use async mode for now */ + + /* ---------------------------------------------------------------- */ + /* Step 4: Initialize SDRAM */ + /* ---------------------------------------------------------------- */ + + @ set K1RUN for bank 0 + @ + orr r4, r4, #MDREFR_K1RUN + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + ldr r4, [r1, #MDREFR_OFFSET] + + @ deassert SLFRSH + @ + bic r4, r4, #MDREFR_SLFRSH + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + ldr r4, [r1, #MDREFR_OFFSET] + + @ assert E1PIN + @ if E0PIN is also used: #(MDREFR_E1PIN|MDREFR_E0PIN) + orr r4, r4, #(MDREFR_E1PIN) + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + ldr r4, [r1, #MDREFR_OFFSET] + nop + nop + + /* Step 4d: */ + /* fetch platform value of mdcnfg */ + @ + ldr r2, =CFG_MDCNFG_VAL + + @ disable all sdram banks + @ + bic r2, r2, #(MDCNFG_DE0 | MDCNFG_DE1) + bic r2, r2, #(MDCNFG_DE2 | MDCNFG_DE3) + + @ program banks 0/1 for bus width + @ + bic r2, r2, #MDCNFG_DWID0 @0=32-bit + + @ write initial value of mdcnfg, w/o enabling sdram banks + @ + str r2, [r1, #MDCNFG_OFFSET] + + /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */ + /* 100..200 µsec. */ + + ldr r3, =OSCR /* reset the OS Timer Count to zero */ + mov r2, #0 + str r2, [r3] + ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ + /* so 0x300 should be plenty */ +1: + ldr r2, [r3] + cmp r4, r2 + bgt 1b + + + /* Step 4f: Trigger a number (usually 8) refresh cycles by */ + /* attempting non-burst read or write accesses to disabled */ + /* SDRAM, as commonly specified in the power up sequence */ + /* documented in SDRAM data sheets. The address(es) used */ + /* for this purpose must not be cacheable. */ + + ldr r3, =CFG_DRAM_BASE + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + + + /* Step 4g: Write MDCNFG with enable bits asserted */ + /* get memory controller base address */ + ldr r1, =MEMC_BASE + + @fetch current mdcnfg value + @ + ldr r3, [r1, #MDCNFG_OFFSET] + + @enable sdram bank 0 if installed (must do for any populated bank) + @ + orr r3, r3, #MDCNFG_DE0 + + @write back mdcnfg, enabling the sdram bank(s) + @ + str r3, [r1, #MDCNFG_OFFSET] + + /* Step 4h: Write MDMRS. */ + + ldr r2, =CFG_MDMRS_VAL + str r2, [r1, #MDMRS_OFFSET] + + + /* We are finished with Intel's memory controller initialisation */ + + + /* ---------------------------------------------------------------- */ + /* Disable (mask) all interrupts at interrupt controller */ + /* ---------------------------------------------------------------- */ + +initirqs: + mov r1, #0 /* clear int. level register (IRQ, not FIQ) */ + ldr r2, =ICLR + str r1, [r2] + + ldr r1, =CFG_ICMR_VAL /* mask all interrupts at the controller */ + ldr r2, =ICMR + str r1, [r2] + + + /* ---------------------------------------------------------------- */ + /* Clock initialisation */ + /* ---------------------------------------------------------------- */ + +initclks: + + /* Disable the peripheral clocks, and set the core clock frequency */ + /* (hard-coding at 398.12MHz for now). */ + /* Turn Off ALL on-chip peripheral clocks for re-configuration */ + /* Note: See label 'ENABLECLKS' for the re-enabling */ + ldr r1, =CKEN + mov r2, #0 + str r2, [r1] + + + /* default value */ + ldr r2, =(CCCR_L27|CCCR_M2|CCCR_N10) /* DEFAULT: {200/200/100} */ + + /* ... and write the core clock config register */ + ldr r1, =CCCR + str r2, [r1] + +#ifdef RTC + /* enable the 32Khz oscillator for RTC and PowerManager */ + + ldr r1, =OSCC + mov r2, #OSCC_OON + str r2, [r1] + + /* NOTE: spin here until OSCC.OOK get set, meaning the PLL */ + /* has settled. */ +60: + ldr r2, [r1] + ands r2, r2, #1 + beq 60b +#endif + + @ Turn on needed clocks + @ +test: + ldr r1, =CKEN + ldr r2, =CFG_CKEN_VAL + str r2, [r1] + + /* ---------------------------------------------------------------- */ + /* */ + /* ---------------------------------------------------------------- */ + + /* Save SDRAM size ?*/ + ldr r1, =DRAM_SIZE + str r8, [r1] + + /* FIXME */ + +#define NODEBUG +#ifdef NODEBUG + /*Disable software and data breakpoints */ + mov r0,#0 + mcr p15,0,r0,c14,c8,0 /* ibcr0 */ + mcr p15,0,r0,c14,c9,0 /* ibcr1 */ + mcr p15,0,r0,c14,c4,0 /* dbcon */ + + /*Enable all debug functionality */ + mov r0,#0x80000000 + mcr p14,0,r0,c10,c0,0 /* dcsr */ + +#endif + + /* ---------------------------------------------------------------- */ + /* End lowlevel_init */ + /* ---------------------------------------------------------------- */ + +endlowlevel_init: + + mov pc, lr diff --git a/board/xaeniax/memsetup.S b/board/xaeniax/memsetup.S deleted file mode 100644 index 5c43b85ad4..0000000000 --- a/board/xaeniax/memsetup.S +++ /dev/null @@ -1,424 +0,0 @@ - /* - * Most of this taken from Redboot hal_platform_setup.h with cleanup - * - * NOTE: I haven't clean this up considerably, just enough to get it - * running. See hal_platform_setup.h for the source. See - * board/cradle/memsetup.S for another PXA250 setup that is - * much cleaner. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -DRAM_SIZE: .long CFG_DRAM_SIZE - -/* wait for coprocessor write complete */ - .macro CPWAIT reg - mrc p15,0,\reg,c2,c0,0 - mov \reg,\reg - sub pc,pc,#4 - .endm - - -.globl memsetup -memsetup: - - mov r10, lr - - /* Set up GPIO pins first ----------------------------------------- */ - - ldr r0,=GPSR0 - ldr r1,=CFG_GPSR0_VAL - str r1,[r0] - - ldr r0,=GPSR1 - ldr r1,=CFG_GPSR1_VAL - str r1,[r0] - - ldr r0,=GPSR2 - ldr r1,=CFG_GPSR2_VAL - str r1,[r0] - - ldr r0,=GPCR0 - ldr r1,=CFG_GPCR0_VAL - str r1,[r0] - - ldr r0,=GPCR1 - ldr r1,=CFG_GPCR1_VAL - str r1,[r0] - - ldr r0,=GPCR2 - ldr r1,=CFG_GPCR2_VAL - str r1,[r0] - - ldr r0,=GPDR0 - ldr r1,=CFG_GPDR0_VAL - str r1,[r0] - - ldr r0,=GPDR1 - ldr r1,=CFG_GPDR1_VAL - str r1,[r0] - - ldr r0,=GPDR2 - ldr r1,=CFG_GPDR2_VAL - str r1,[r0] - - ldr r0,=GAFR0_L - ldr r1,=CFG_GAFR0_L_VAL - str r1,[r0] - - ldr r0,=GAFR0_U - ldr r1,=CFG_GAFR0_U_VAL - str r1,[r0] - - ldr r0,=GAFR1_L - ldr r1,=CFG_GAFR1_L_VAL - str r1,[r0] - - ldr r0,=GAFR1_U - ldr r1,=CFG_GAFR1_U_VAL - str r1,[r0] - - ldr r0,=GAFR2_L - ldr r1,=CFG_GAFR2_L_VAL - str r1,[r0] - - ldr r0,=GAFR2_U - ldr r1,=CFG_GAFR2_U_VAL - str r1,[r0] - - ldr r0,=PSSR /* enable GPIO pins */ - ldr r1,=CFG_PSSR_VAL - str r1,[r0] - - /* ---------------------------------------------------------------- */ - /* Enable memory interface */ - /* */ - /* The sequence below is based on the recommended init steps */ - /* detailed in the Intel PXA250 Operating Systems Developers Guide, */ - /* Chapter 10. */ - /* ---------------------------------------------------------------- */ - - /* ---------------------------------------------------------------- */ - /* Step 1: Wait for at least 200 microsedonds to allow internal */ - /* clocks to settle. Only necessary after hard reset... */ - /* FIXME: can be optimized later */ - /* ---------------------------------------------------------------- */ - - ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ - /* so 0x300 should be plenty */ -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - -mem_init: - - ldr r1,=MEMC_BASE /* get memory controller base addr. */ - - /* ---------------------------------------------------------------- */ - /* Step 2a: Initialize Asynchronous static memory controller */ - /* ---------------------------------------------------------------- */ - - /* MSC registers: timing, bus width, mem type */ - - /* MSC0: nCS(0,1) */ - ldr r2,=CFG_MSC0_VAL - str r2,[r1, #MSC0_OFFSET] - ldr r2,[r1, #MSC0_OFFSET] /* read back to ensure data latches */ - - /* MSC1: nCS(2,3) */ - ldr r2,=CFG_MSC1_VAL - str r2,[r1, #MSC1_OFFSET] - ldr r2,[r1, #MSC1_OFFSET] - - /* MSC2: nCS(4,5) */ - ldr r2,=CFG_MSC2_VAL - str r2,[r1, #MSC2_OFFSET] - ldr r2,[r1, #MSC2_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 2b: Initialize Card Interface */ - /* ---------------------------------------------------------------- */ - - /* MECR: Memory Expansion Card Register */ - ldr r2,=CFG_MECR_VAL - str r2,[r1, #MECR_OFFSET] - ldr r2,[r1, #MECR_OFFSET] - - /* MCMEM0: Card Interface slot 0 timing */ - ldr r2,=CFG_MCMEM0_VAL - str r2,[r1, #MCMEM0_OFFSET] - ldr r2,[r1, #MCMEM0_OFFSET] - - /* MCMEM1: Card Interface slot 1 timing */ - ldr r2,=CFG_MCMEM1_VAL - str r2,[r1, #MCMEM1_OFFSET] - ldr r2,[r1, #MCMEM1_OFFSET] - - /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ - ldr r2,=CFG_MCATT0_VAL - str r2,[r1, #MCATT0_OFFSET] - ldr r2,[r1, #MCATT0_OFFSET] - - /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ - ldr r2,=CFG_MCATT1_VAL - str r2,[r1, #MCATT1_OFFSET] - ldr r2,[r1, #MCATT1_OFFSET] - - /* MCIO0: Card Interface I/O Space Timing, slot 0 */ - ldr r2,=CFG_MCIO0_VAL - str r2,[r1, #MCIO0_OFFSET] - ldr r2,[r1, #MCIO0_OFFSET] - - /* MCIO1: Card Interface I/O Space Timing, slot 1 */ - ldr r2,=CFG_MCIO1_VAL - str r2,[r1, #MCIO1_OFFSET] - ldr r2,[r1, #MCIO1_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 2c: Write FLYCNFG FIXME: what's that??? */ - /* ---------------------------------------------------------------- */ - - /* ---------------------------------------------------------------- */ - /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */ - /* ---------------------------------------------------------------- */ - - @ get the mdrefr settings - ldr r4,=CFG_MDREFR_VAL - - @ write back mdrefr - str r4,[r1, #MDREFR_OFFSET] - ldr r4,[r1, #MDREFR_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */ - /* ---------------------------------------------------------------- */ - - /* Initialize SXCNFG register. Assert the enable bits */ - - /* Write SXMRS to cause an MRS command to all enabled banks of */ - /* synchronous static memory. Note that SXLCR need not be written */ - /* at this time. */ - - /* FIXME: we use async mode for now */ - - /* ---------------------------------------------------------------- */ - /* Step 4: Initialize SDRAM */ - /* ---------------------------------------------------------------- */ - - @ set K1RUN for bank 0 - @ - orr r4, r4, #MDREFR_K1RUN - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - - @ deassert SLFRSH - @ - bic r4, r4, #MDREFR_SLFRSH - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - - @ assert E1PIN - @ if E0PIN is also used: #(MDREFR_E1PIN|MDREFR_E0PIN) - orr r4, r4, #(MDREFR_E1PIN) - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - nop - nop - - /* Step 4d: */ - /* fetch platform value of mdcnfg */ - @ - ldr r2, =CFG_MDCNFG_VAL - - @ disable all sdram banks - @ - bic r2, r2, #(MDCNFG_DE0 | MDCNFG_DE1) - bic r2, r2, #(MDCNFG_DE2 | MDCNFG_DE3) - - @ program banks 0/1 for bus width - @ - bic r2, r2, #MDCNFG_DWID0 @0=32-bit - - @ write initial value of mdcnfg, w/o enabling sdram banks - @ - str r2, [r1, #MDCNFG_OFFSET] - - /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */ - /* 100..200 µsec. */ - - ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ - /* so 0x300 should be plenty */ -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - - - /* Step 4f: Trigger a number (usually 8) refresh cycles by */ - /* attempting non-burst read or write accesses to disabled */ - /* SDRAM, as commonly specified in the power up sequence */ - /* documented in SDRAM data sheets. The address(es) used */ - /* for this purpose must not be cacheable. */ - - ldr r3, =CFG_DRAM_BASE - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - - - /* Step 4g: Write MDCNFG with enable bits asserted */ - /* get memory controller base address */ - ldr r1, =MEMC_BASE - - @fetch current mdcnfg value - @ - ldr r3, [r1, #MDCNFG_OFFSET] - - @enable sdram bank 0 if installed (must do for any populated bank) - @ - orr r3, r3, #MDCNFG_DE0 - - @write back mdcnfg, enabling the sdram bank(s) - @ - str r3, [r1, #MDCNFG_OFFSET] - - /* Step 4h: Write MDMRS. */ - - ldr r2, =CFG_MDMRS_VAL - str r2, [r1, #MDMRS_OFFSET] - - - /* We are finished with Intel's memory controller initialisation */ - - - /* ---------------------------------------------------------------- */ - /* Disable (mask) all interrupts at interrupt controller */ - /* ---------------------------------------------------------------- */ - -initirqs: - mov r1, #0 /* clear int. level register (IRQ, not FIQ) */ - ldr r2, =ICLR - str r1, [r2] - - ldr r1, =CFG_ICMR_VAL /* mask all interrupts at the controller */ - ldr r2, =ICMR - str r1, [r2] - - - /* ---------------------------------------------------------------- */ - /* Clock initialisation */ - /* ---------------------------------------------------------------- */ - -initclks: - - /* Disable the peripheral clocks, and set the core clock frequency */ - /* (hard-coding at 398.12MHz for now). */ - /* Turn Off ALL on-chip peripheral clocks for re-configuration */ - /* Note: See label 'ENABLECLKS' for the re-enabling */ - ldr r1, =CKEN - mov r2, #0 - str r2, [r1] - - - /* default value */ - ldr r2, =(CCCR_L27|CCCR_M2|CCCR_N10) /* DEFAULT: {200/200/100} */ - - /* ... and write the core clock config register */ - ldr r1, =CCCR - str r2, [r1] - -#ifdef RTC - /* enable the 32Khz oscillator for RTC and PowerManager */ - - ldr r1, =OSCC - mov r2, #OSCC_OON - str r2, [r1] - - /* NOTE: spin here until OSCC.OOK get set, meaning the PLL */ - /* has settled. */ -60: - ldr r2, [r1] - ands r2, r2, #1 - beq 60b -#endif - - @ Turn on needed clocks - @ -test: - ldr r1, =CKEN - ldr r2, =CFG_CKEN_VAL - str r2, [r1] - - /* ---------------------------------------------------------------- */ - /* */ - /* ---------------------------------------------------------------- */ - - /* Save SDRAM size ?*/ - ldr r1, =DRAM_SIZE - str r8, [r1] - - /* FIXME */ - -#define NODEBUG -#ifdef NODEBUG - /*Disable software and data breakpoints */ - mov r0,#0 - mcr p15,0,r0,c14,c8,0 /* ibcr0 */ - mcr p15,0,r0,c14,c9,0 /* ibcr1 */ - mcr p15,0,r0,c14,c4,0 /* dbcon */ - - /*Enable all debug functionality */ - mov r0,#0x80000000 - mcr p14,0,r0,c10,c0,0 /* dcsr */ - -#endif - - /* ---------------------------------------------------------------- */ - /* End memsetup */ - /* ---------------------------------------------------------------- */ - -endmemsetup: - - mov pc, lr diff --git a/board/xm250/Makefile b/board/xm250/Makefile index 3572f72683..1b0a3f0178 100644 --- a/board/xm250/Makefile +++ b/board/xm250/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := xm250.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $^ diff --git a/board/xm250/lowlevel_init.S b/board/xm250/lowlevel_init.S new file mode 100644 index 0000000000..2ebd39554a --- /dev/null +++ b/board/xm250/lowlevel_init.S @@ -0,0 +1,519 @@ +/* + * Most of this taken from Redboot hal_platform_setup.h with cleanup + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +DRAM_SIZE: .long CFG_DRAM_SIZE + +/* wait for coprocessor write complete */ + .macro CPWAIT reg + mrc p15,0,\reg,c2,c0,0 + mov \reg,\reg + sub pc,pc,#4 + .endm +/* + .macro SET_LED val + ldr r6, =CRADLE_LED_CLR_REG + ldr r7, =0 + str r7, [r6] + ldr r6, =CRADLE_LED_SET_REG + ldr r7, =\val + str r7, [r6] + .endm +*/ + +.globl lowlevel_init +lowlevel_init: + + mov r10, lr + + /* Set up GPIO pins first */ + + ldr r0, =GPSR0 + ldr r1, =CFG_GPSR0_VAL + str r1, [r0] + + ldr r0, =GPSR1 + ldr r1, =CFG_GPSR1_VAL + str r1, [r0] + + ldr r0, =GPSR2 + ldr r1, =CFG_GPSR2_VAL + str r1, [r0] + + ldr r0, =GPCR0 + ldr r1, =CFG_GPCR0_VAL + str r1, [r0] + + ldr r0, =GPCR1 + ldr r1, =CFG_GPCR1_VAL + str r1, [r0] + + ldr r0, =GPCR2 + ldr r1, =CFG_GPCR2_VAL + str r1, [r0] + + ldr r0, =GRER0 + ldr r1, =CFG_GRER0_VAL + str r1, [r0] + + ldr r0, =GRER1 + ldr r1, =CFG_GRER1_VAL + str r1, [r0] + + ldr r0, =GRER2 + ldr r1, =CFG_GRER2_VAL + str r1, [r0] + + ldr r0, =GFER0 + ldr r1, =CFG_GFER0_VAL + str r1, [r0] + + ldr r0, =GFER1 + ldr r1, =CFG_GFER1_VAL + str r1, [r0] + + ldr r0, =GFER2 + ldr r1, =CFG_GFER2_VAL + str r1, [r0] + + ldr r0, =GPDR0 + ldr r1, =CFG_GPDR0_VAL + str r1, [r0] + + ldr r0, =GPDR1 + ldr r1, =CFG_GPDR1_VAL + str r1, [r0] + + ldr r0, =GPDR2 + ldr r1, =CFG_GPDR2_VAL + str r1, [r0] + + ldr r0, =GAFR0_L + ldr r1, =CFG_GAFR0_L_VAL + str r1, [r0] + + ldr r0, =GAFR0_U + ldr r1, =CFG_GAFR0_U_VAL + str r1, [r0] + + ldr r0, =GAFR1_L + ldr r1, =CFG_GAFR1_L_VAL + str r1, [r0] + + ldr r0, =GAFR1_U + ldr r1, =CFG_GAFR1_U_VAL + str r1, [r0] + + ldr r0, =GAFR2_L + ldr r1, =CFG_GAFR2_L_VAL + str r1, [r0] + + ldr r0, =GAFR2_U + ldr r1, =CFG_GAFR2_U_VAL + str r1, [r0] + + /* enable GPIO pins */ + ldr r0, =PSSR + ldr r1, =CFG_PSSR_VAL + str r1, [r0] + + /* SET_LED 1 */ + + ldr r3, =MSC1 /* low - bank 2 Lubbock Registers / SRAM */ + ldr r2, =CFG_MSC1_VAL /* high - bank 3 Ethernet Controller */ + str r2, [r3] /* need to set MSC1 before trying to write to the HEX LEDs */ + ldr r2, [r3] /* need to read it back to make sure the value latches (see MSC section of manual) */ + + +/********************************************************************* + * Initlialize Memory Controller + * + * See PXA250 Operating System Developer's Guide + * + * pause for 200 uSecs- allow internal clocks to settle + * *Note: only need this if hard reset... doing it anyway for now + */ + + @ Step 1 + @ ---- Wait 200 usec + ldr r3, =OSCR @ reset the OS Timer Count to zero + mov r2, #0 + str r2, [r3] + ldr r4, =0x300 @ really 0x2E1 is about 200usec, so 0x300 should be plenty +1: + ldr r2, [r3] + cmp r4, r2 + bgt 1b + + /* SET_LED 2 */ + +mem_init: + @ get memory controller base address + ldr r1, =MEMC_BASE + + +@**************************************************************************** +@ Step 2 +@ + + @ Step 2a + @ write msc0, read back to ensure data latches + @ + ldr r2, =CFG_MSC0_VAL + str r2, [r1, #MSC0_OFFSET] + ldr r2, [r1, #MSC0_OFFSET] + + @ write msc1 + ldr r2, =CFG_MSC1_VAL + str r2, [r1, #MSC1_OFFSET] + ldr r2, [r1, #MSC1_OFFSET] + + @ write msc2 + ldr r2, =CFG_MSC2_VAL + str r2, [r1, #MSC2_OFFSET] + ldr r2, [r1, #MSC2_OFFSET] + + @ Step 2b + @ write mecr + ldr r2, =CFG_MECR_VAL + str r2, [r1, #MECR_OFFSET] + + @ write mcmem0 + ldr r2, =CFG_MCMEM0_VAL + str r2, [r1, #MCMEM0_OFFSET] + + @ write mcmem1 + ldr r2, =CFG_MCMEM1_VAL + str r2, [r1, #MCMEM1_OFFSET] + + @ write mcatt0 + ldr r2, =CFG_MCATT0_VAL + str r2, [r1, #MCATT0_OFFSET] + + @ write mcatt1 + ldr r2, =CFG_MCATT1_VAL + str r2, [r1, #MCATT1_OFFSET] + + @ write mcio0 + ldr r2, =CFG_MCIO0_VAL + str r2, [r1, #MCIO0_OFFSET] + + @ write mcio1 + ldr r2, =CFG_MCIO1_VAL + str r2, [r1, #MCIO1_OFFSET] + + /*SET_LED 3 */ + + @ Step 2c + @ fly-by-dma is defeatured on this part + @ write flycnfg + @ldr r2, =CFG_FLYCNFG_VAL + @str r2, [r1, #FLYCNFG_OFFSET] + +/* FIXME Does this sequence really make sense */ +#ifdef REDBOOT_WAY + @ Step 2d + @ get the mdrefr settings + ldr r3, =CFG_MDREFR_VAL + + @ extract DRI field (we need a valid DRI field) + @ + ldr r2, =0xFFF + + @ valid DRI field in r3 + @ + and r3, r3, r2 + + @ get the reset state of MDREFR + @ + ldr r4, [r1, #MDREFR_OFFSET] + + @ clear the DRI field + @ + bic r4, r4, r2 + + @ insert the valid DRI field loaded above + @ + orr r4, r4, r3 + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + + @ *Note: preserve the mdrefr value in r4 * + + /*SET_LED 4 */ + +@**************************************************************************** +@ Step 3 +@ +@ NO SRAM + + mov pc, r10 + + +@**************************************************************************** +@ Step 4 +@ + + @ Assumes previous mdrefr value in r4, if not then read current mdrefr + + @ clear the free-running clock bits + @ (clear K0Free, K1Free, K2Free + @ + bic r4, r4, #(0x00800000 | 0x01000000 | 0x02000000) + + @ set K0RUN for CPLD clock + @ + orr r4, r4, #0x00002000 + + @ set K1RUN if bank 0 installed + @ + orr r4, r4, #0x00010000 + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + ldr r4, [r1, #MDREFR_OFFSET] + + @ deassert SLFRSH + @ + bic r4, r4, #0x00400000 + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + + @ assert E1PIN + @ + orr r4, r4, #0x00008000 + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + ldr r4, [r1, #MDREFR_OFFSET] + nop + nop +#else + @ Step 2d + @ get the mdrefr settings + ldr r4, =CFG_MDREFR_VAL + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + + @ Step 4 + + @ set K0RUN for FLASH clock + @ + orr r4, r4, #0x00002000 + + @ set K1RUN for bank DRAM 0 + @ + orr r4, r4, #0x00010000 + + @ set K2RUN for bank PLD + @ + orr r4, r4, #0x00040000 + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + ldr r4, [r1, #MDREFR_OFFSET] + + @ deassert SLFRSH + @ + bic r4, r4, #0x00400000 + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + + @ assert E1PIN + @ + orr r4, r4, #0x00008000 + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + ldr r4, [r1, #MDREFR_OFFSET] + nop + nop +#endif + + @ Step 4d + @ fetch platform value of mdcnfg + @ + ldr r2, =CFG_MDCNFG_VAL + + @ disable all sdram banks + @ + bic r2, r2, #(MDCNFG_DE0 | MDCNFG_DE1) + bic r2, r2, #(MDCNFG_DE2 | MDCNFG_DE3) + + @ program banks 0/1 for bus width + @ + bic r2, r2, #MDCNFG_DWID0 @0=32-bit + + @ write initial value of mdcnfg, w/o enabling sdram banks + @ + str r2, [r1, #MDCNFG_OFFSET] + + @ Step 4e + @ pause for 200 uSecs + @ + ldr r3, =OSCR @ reset the OS Timer Count to zero + mov r2, #0 + str r2, [r3] + ldr r4, =0x300 @ really 0x2E1 is about 200usec, so 0x300 should be plenty +1: + ldr r2, [r3] + cmp r4, r2 + bgt 1b + + /*SET_LED 5 */ + + /* Why is this here??? */ + mov r0, #0x78 @turn everything off + mcr p15, 0, r0, c1, c0, 0 @(caches off, MMU off, etc.) + + @ Step 4f + @ Access memory *not yet enabled* for CBR refresh cycles (8) + @ - CBR is generated for all banks + + ldr r2, =CFG_DRAM_BASE + str r2, [r2] + str r2, [r2] + str r2, [r2] + str r2, [r2] + str r2, [r2] + str r2, [r2] + str r2, [r2] + str r2, [r2] + + @ Step 4g + @get memory controller base address + @ + ldr r1, =MEMC_BASE + + @fetch current mdcnfg value + @ + ldr r3, [r1, #MDCNFG_OFFSET] + + @enable sdram bank 0 if installed (must do for any populated bank) + @ + orr r3, r3, #MDCNFG_DE0 + + @write back mdcnfg, enabling the sdram bank(s) + @ + str r3, [r1, #MDCNFG_OFFSET] + + @ Step 4h + @ write mdmrs + @ + ldr r2, =CFG_MDMRS_VAL + str r2, [r1, #MDMRS_OFFSET] + + @ Done Memory Init + + /*SET_LED 6 */ + + @******************************************************************** + @ Disable (mask) all interrupts at the interrupt controller + @ + + @ clear the interrupt level register (use IRQ, not FIQ) + @ + mov r1, #0 + ldr r2, =ICLR + str r1, [r2] + + @ Set interrupt mask register + @ + ldr r1, =CFG_ICMR_VAL + ldr r2, =ICMR + str r1, [r2] + + @ ******************************************************************** + @ Disable the peripheral clocks, and set the core clock + @ + + @ Turn Off ALL on-chip peripheral clocks for re-configuration + @ + ldr r1, =CKEN + mov r2, #0 + str r2, [r1] + + @ set core clocks + @ + ldr r2, =CFG_CCCR_VAL + ldr r1, =CCCR + str r2, [r1] + +#ifdef ENABLE32KHZ + @ enable the 32Khz oscillator for RTC and PowerManager + @ + ldr r1, =OSCC + mov r2, #OSCC_OON + str r2, [r1] + + @ NOTE: spin here until OSCC.OOK get set, + @ meaning the PLL has settled. + @ +60: + ldr r2, [r1] + ands r2, r2, #1 + beq 60b +#endif + + @ Turn on needed clocks + @ + ldr r1, =CKEN + ldr r2, =CFG_CKEN_VAL + str r2, [r1] + + /*SET_LED 7 */ + +/* Is this needed???? */ +#define NODEBUG +#ifdef NODEBUG + /*Disable software and data breakpoints */ + mov r0,#0 + mcr p15,0,r0,c14,c8,0 /* ibcr0 */ + mcr p15,0,r0,c14,c9,0 /* ibcr1 */ + mcr p15,0,r0,c14,c4,0 /* dbcon */ + + /*Enable all debug functionality */ + mov r0,#0x80000000 + mcr p14,0,r0,c10,c0,0 /* dcsr */ + +#endif + + /*SET_LED 8 */ + + mov pc, r10 + +@ End lowlevel_init diff --git a/board/xm250/memsetup.S b/board/xm250/memsetup.S deleted file mode 100644 index f68e843393..0000000000 --- a/board/xm250/memsetup.S +++ /dev/null @@ -1,519 +0,0 @@ -/* - * Most of this taken from Redboot hal_platform_setup.h with cleanup - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -DRAM_SIZE: .long CFG_DRAM_SIZE - -/* wait for coprocessor write complete */ - .macro CPWAIT reg - mrc p15,0,\reg,c2,c0,0 - mov \reg,\reg - sub pc,pc,#4 - .endm -/* - .macro SET_LED val - ldr r6, =CRADLE_LED_CLR_REG - ldr r7, =0 - str r7, [r6] - ldr r6, =CRADLE_LED_SET_REG - ldr r7, =\val - str r7, [r6] - .endm -*/ - -.globl memsetup -memsetup: - - mov r10, lr - - /* Set up GPIO pins first */ - - ldr r0, =GPSR0 - ldr r1, =CFG_GPSR0_VAL - str r1, [r0] - - ldr r0, =GPSR1 - ldr r1, =CFG_GPSR1_VAL - str r1, [r0] - - ldr r0, =GPSR2 - ldr r1, =CFG_GPSR2_VAL - str r1, [r0] - - ldr r0, =GPCR0 - ldr r1, =CFG_GPCR0_VAL - str r1, [r0] - - ldr r0, =GPCR1 - ldr r1, =CFG_GPCR1_VAL - str r1, [r0] - - ldr r0, =GPCR2 - ldr r1, =CFG_GPCR2_VAL - str r1, [r0] - - ldr r0, =GRER0 - ldr r1, =CFG_GRER0_VAL - str r1, [r0] - - ldr r0, =GRER1 - ldr r1, =CFG_GRER1_VAL - str r1, [r0] - - ldr r0, =GRER2 - ldr r1, =CFG_GRER2_VAL - str r1, [r0] - - ldr r0, =GFER0 - ldr r1, =CFG_GFER0_VAL - str r1, [r0] - - ldr r0, =GFER1 - ldr r1, =CFG_GFER1_VAL - str r1, [r0] - - ldr r0, =GFER2 - ldr r1, =CFG_GFER2_VAL - str r1, [r0] - - ldr r0, =GPDR0 - ldr r1, =CFG_GPDR0_VAL - str r1, [r0] - - ldr r0, =GPDR1 - ldr r1, =CFG_GPDR1_VAL - str r1, [r0] - - ldr r0, =GPDR2 - ldr r1, =CFG_GPDR2_VAL - str r1, [r0] - - ldr r0, =GAFR0_L - ldr r1, =CFG_GAFR0_L_VAL - str r1, [r0] - - ldr r0, =GAFR0_U - ldr r1, =CFG_GAFR0_U_VAL - str r1, [r0] - - ldr r0, =GAFR1_L - ldr r1, =CFG_GAFR1_L_VAL - str r1, [r0] - - ldr r0, =GAFR1_U - ldr r1, =CFG_GAFR1_U_VAL - str r1, [r0] - - ldr r0, =GAFR2_L - ldr r1, =CFG_GAFR2_L_VAL - str r1, [r0] - - ldr r0, =GAFR2_U - ldr r1, =CFG_GAFR2_U_VAL - str r1, [r0] - - /* enable GPIO pins */ - ldr r0, =PSSR - ldr r1, =CFG_PSSR_VAL - str r1, [r0] - - /* SET_LED 1 */ - - ldr r3, =MSC1 /* low - bank 2 Lubbock Registers / SRAM */ - ldr r2, =CFG_MSC1_VAL /* high - bank 3 Ethernet Controller */ - str r2, [r3] /* need to set MSC1 before trying to write to the HEX LEDs */ - ldr r2, [r3] /* need to read it back to make sure the value latches (see MSC section of manual) */ - - -/********************************************************************* - * Initlialize Memory Controller - * - * See PXA250 Operating System Developer's Guide - * - * pause for 200 uSecs- allow internal clocks to settle - * *Note: only need this if hard reset... doing it anyway for now - */ - - @ Step 1 - @ ---- Wait 200 usec - ldr r3, =OSCR @ reset the OS Timer Count to zero - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 @ really 0x2E1 is about 200usec, so 0x300 should be plenty -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - - /* SET_LED 2 */ - -mem_init: - @ get memory controller base address - ldr r1, =MEMC_BASE - - -@**************************************************************************** -@ Step 2 -@ - - @ Step 2a - @ write msc0, read back to ensure data latches - @ - ldr r2, =CFG_MSC0_VAL - str r2, [r1, #MSC0_OFFSET] - ldr r2, [r1, #MSC0_OFFSET] - - @ write msc1 - ldr r2, =CFG_MSC1_VAL - str r2, [r1, #MSC1_OFFSET] - ldr r2, [r1, #MSC1_OFFSET] - - @ write msc2 - ldr r2, =CFG_MSC2_VAL - str r2, [r1, #MSC2_OFFSET] - ldr r2, [r1, #MSC2_OFFSET] - - @ Step 2b - @ write mecr - ldr r2, =CFG_MECR_VAL - str r2, [r1, #MECR_OFFSET] - - @ write mcmem0 - ldr r2, =CFG_MCMEM0_VAL - str r2, [r1, #MCMEM0_OFFSET] - - @ write mcmem1 - ldr r2, =CFG_MCMEM1_VAL - str r2, [r1, #MCMEM1_OFFSET] - - @ write mcatt0 - ldr r2, =CFG_MCATT0_VAL - str r2, [r1, #MCATT0_OFFSET] - - @ write mcatt1 - ldr r2, =CFG_MCATT1_VAL - str r2, [r1, #MCATT1_OFFSET] - - @ write mcio0 - ldr r2, =CFG_MCIO0_VAL - str r2, [r1, #MCIO0_OFFSET] - - @ write mcio1 - ldr r2, =CFG_MCIO1_VAL - str r2, [r1, #MCIO1_OFFSET] - - /*SET_LED 3 */ - - @ Step 2c - @ fly-by-dma is defeatured on this part - @ write flycnfg - @ldr r2, =CFG_FLYCNFG_VAL - @str r2, [r1, #FLYCNFG_OFFSET] - -/* FIXME Does this sequence really make sense */ -#ifdef REDBOOT_WAY - @ Step 2d - @ get the mdrefr settings - ldr r3, =CFG_MDREFR_VAL - - @ extract DRI field (we need a valid DRI field) - @ - ldr r2, =0xFFF - - @ valid DRI field in r3 - @ - and r3, r3, r2 - - @ get the reset state of MDREFR - @ - ldr r4, [r1, #MDREFR_OFFSET] - - @ clear the DRI field - @ - bic r4, r4, r2 - - @ insert the valid DRI field loaded above - @ - orr r4, r4, r3 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - - @ *Note: preserve the mdrefr value in r4 * - - /*SET_LED 4 */ - -@**************************************************************************** -@ Step 3 -@ -@ NO SRAM - - mov pc, r10 - - -@**************************************************************************** -@ Step 4 -@ - - @ Assumes previous mdrefr value in r4, if not then read current mdrefr - - @ clear the free-running clock bits - @ (clear K0Free, K1Free, K2Free - @ - bic r4, r4, #(0x00800000 | 0x01000000 | 0x02000000) - - @ set K0RUN for CPLD clock - @ - orr r4, r4, #0x00002000 - - @ set K1RUN if bank 0 installed - @ - orr r4, r4, #0x00010000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - - @ deassert SLFRSH - @ - bic r4, r4, #0x00400000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - - @ assert E1PIN - @ - orr r4, r4, #0x00008000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - nop - nop -#else - @ Step 2d - @ get the mdrefr settings - ldr r4, =CFG_MDREFR_VAL - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - - @ Step 4 - - @ set K0RUN for FLASH clock - @ - orr r4, r4, #0x00002000 - - @ set K1RUN for bank DRAM 0 - @ - orr r4, r4, #0x00010000 - - @ set K2RUN for bank PLD - @ - orr r4, r4, #0x00040000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - - @ deassert SLFRSH - @ - bic r4, r4, #0x00400000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - - @ assert E1PIN - @ - orr r4, r4, #0x00008000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - nop - nop -#endif - - @ Step 4d - @ fetch platform value of mdcnfg - @ - ldr r2, =CFG_MDCNFG_VAL - - @ disable all sdram banks - @ - bic r2, r2, #(MDCNFG_DE0 | MDCNFG_DE1) - bic r2, r2, #(MDCNFG_DE2 | MDCNFG_DE3) - - @ program banks 0/1 for bus width - @ - bic r2, r2, #MDCNFG_DWID0 @0=32-bit - - @ write initial value of mdcnfg, w/o enabling sdram banks - @ - str r2, [r1, #MDCNFG_OFFSET] - - @ Step 4e - @ pause for 200 uSecs - @ - ldr r3, =OSCR @ reset the OS Timer Count to zero - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 @ really 0x2E1 is about 200usec, so 0x300 should be plenty -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - - /*SET_LED 5 */ - - /* Why is this here??? */ - mov r0, #0x78 @turn everything off - mcr p15, 0, r0, c1, c0, 0 @(caches off, MMU off, etc.) - - @ Step 4f - @ Access memory *not yet enabled* for CBR refresh cycles (8) - @ - CBR is generated for all banks - - ldr r2, =CFG_DRAM_BASE - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - - @ Step 4g - @get memory controller base address - @ - ldr r1, =MEMC_BASE - - @fetch current mdcnfg value - @ - ldr r3, [r1, #MDCNFG_OFFSET] - - @enable sdram bank 0 if installed (must do for any populated bank) - @ - orr r3, r3, #MDCNFG_DE0 - - @write back mdcnfg, enabling the sdram bank(s) - @ - str r3, [r1, #MDCNFG_OFFSET] - - @ Step 4h - @ write mdmrs - @ - ldr r2, =CFG_MDMRS_VAL - str r2, [r1, #MDMRS_OFFSET] - - @ Done Memory Init - - /*SET_LED 6 */ - - @******************************************************************** - @ Disable (mask) all interrupts at the interrupt controller - @ - - @ clear the interrupt level register (use IRQ, not FIQ) - @ - mov r1, #0 - ldr r2, =ICLR - str r1, [r2] - - @ Set interrupt mask register - @ - ldr r1, =CFG_ICMR_VAL - ldr r2, =ICMR - str r1, [r2] - - @ ******************************************************************** - @ Disable the peripheral clocks, and set the core clock - @ - - @ Turn Off ALL on-chip peripheral clocks for re-configuration - @ - ldr r1, =CKEN - mov r2, #0 - str r2, [r1] - - @ set core clocks - @ - ldr r2, =CFG_CCCR_VAL - ldr r1, =CCCR - str r2, [r1] - -#ifdef ENABLE32KHZ - @ enable the 32Khz oscillator for RTC and PowerManager - @ - ldr r1, =OSCC - mov r2, #OSCC_OON - str r2, [r1] - - @ NOTE: spin here until OSCC.OOK get set, - @ meaning the PLL has settled. - @ -60: - ldr r2, [r1] - ands r2, r2, #1 - beq 60b -#endif - - @ Turn on needed clocks - @ - ldr r1, =CKEN - ldr r2, =CFG_CKEN_VAL - str r2, [r1] - - /*SET_LED 7 */ - -/* Is this needed???? */ -#define NODEBUG -#ifdef NODEBUG - /*Disable software and data breakpoints */ - mov r0,#0 - mcr p15,0,r0,c14,c8,0 /* ibcr0 */ - mcr p15,0,r0,c14,c9,0 /* ibcr1 */ - mcr p15,0,r0,c14,c4,0 /* dbcon */ - - /*Enable all debug functionality */ - mov r0,#0x80000000 - mcr p14,0,r0,c10,c0,0 /* dcsr */ - -#endif - - /*SET_LED 8 */ - - mov pc, r10 - -@ End memsetup diff --git a/board/xsengine/Makefile b/board/xsengine/Makefile index 591b728de1..ed1464af3e 100644 --- a/board/xsengine/Makefile +++ b/board/xsengine/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := xsengine.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/xsengine/lowlevel_init.S b/board/xsengine/lowlevel_init.S new file mode 100644 index 0000000000..309faabd92 --- /dev/null +++ b/board/xsengine/lowlevel_init.S @@ -0,0 +1,221 @@ +#include +#include +#include + +DRAM_SIZE: .long CFG_DRAM_SIZE + +.globl lowlevel_init +lowlevel_init: + + mov r10, lr + +/* ---- GPIO INITIALISATION ---- */ +/* Set up GPIO pins first (3 groups [31:0] [63:32] [80:64]) */ + + /* General purpose set registers */ + ldr r0, =GPSR0 + ldr r1, =CFG_GPSR0_VAL + str r1, [r0] + ldr r0, =GPSR1 + ldr r1, =CFG_GPSR1_VAL + str r1, [r0] + ldr r0, =GPSR2 + ldr r1, =CFG_GPSR2_VAL + str r1, [r0] + + /* General purpose clear registers */ + ldr r0, =GPCR0 + ldr r1, =CFG_GPCR0_VAL + str r1, [r0] + ldr r0, =GPCR1 + ldr r1, =CFG_GPCR1_VAL + str r1, [r0] + ldr r0, =GPCR2 + ldr r1, =CFG_GPCR2_VAL + str r1, [r0] + + /* General rising edge registers */ + ldr r0, =GRER0 + ldr r1, =CFG_GRER0_VAL + str r1, [r0] + ldr r0, =GRER1 + ldr r1, =CFG_GRER1_VAL + str r1, [r0] + ldr r0, =GRER2 + ldr r1, =CFG_GRER2_VAL + str r1, [r0] + + /* General falling edge registers */ + ldr r0, =GFER0 + ldr r1, =CFG_GFER0_VAL + str r1, [r0] + ldr r0, =GFER1 + ldr r1, =CFG_GFER1_VAL + str r1, [r0] + ldr r0, =GFER2 + ldr r1, =CFG_GFER2_VAL + str r1, [r0] + + /* General edge detect registers */ + ldr r0, =GPDR0 + ldr r1, =CFG_GPDR0_VAL + str r1, [r0] + ldr r0, =GPDR1 + ldr r1, =CFG_GPDR1_VAL + str r1, [r0] + ldr r0, =GPDR2 + ldr r1, =CFG_GPDR2_VAL + str r1, [r0] + + /* General alternate function registers */ + ldr r0, =GAFR0_L /* [0:15] */ + ldr r1, =CFG_GAFR0_L_VAL + str r1, [r0] + ldr r0, =GAFR0_U /* [31:16] */ + ldr r1, =CFG_GAFR0_U_VAL + str r1, [r0] + ldr r0, =GAFR1_L /* [47:32] */ + ldr r1, =CFG_GAFR1_L_VAL + str r1, [r0] + ldr r0, =GAFR1_U /* [63:48] */ + ldr r1, =CFG_GAFR1_U_VAL + str r1, [r0] + ldr r0, =GAFR2_L /* [79:64] */ + ldr r1, =CFG_GAFR2_L_VAL + str r1, [r0] + ldr r0, =GAFR2_U /* [80] */ + ldr r1, =CFG_GAFR2_U_VAL + str r1, [r0] + + /* General purpose direction registers */ + ldr r0, =GPDR0 + ldr r1, =CFG_GPDR0_VAL + str r1, [r0] + ldr r0, =GPDR1 + ldr r1, =CFG_GPDR1_VAL + str r1, [r0] + ldr r0, =GPDR2 + ldr r1, =CFG_GPDR2_VAL + str r1, [r0] + + /* Power manager sleep status */ + ldr r0, =PSSR + ldr r1, =CFG_PSSR_VAL + str r1, [r0] + +/* ---- MEMORY INITIALISATION ---- */ +/* Initialize Memory Controller, see PXA250 Operating System Developer's Guide */ +/* pause for 200 uSecs- allow internal clocks to settle */ + ldr r3, =OSCR /* reset the OS Timer Count to zero */ + mov r2, #0 + str r2, [r3] + ldr r4, =0x300 /* really 0x2E1 is about 200usec, so 0x300 should be plenty */ +1: + ldr r2, [r3] + cmp r4, r2 + bgt 1b + +mem_init: +/* get memory controller base address */ + ldr r1, =MEMC_BASE + +/* ---- FLASH INITIALISATION ---- */ +/* Write MSC0 and read back to ensure data change is accepted by cpu */ + ldr r2, =CFG_MSC0_VAL + str r2, [r1, #MSC0_OFFSET] + ldr r2, [r1, #MSC0_OFFSET] + +/* ---- SDRAM INITIALISATION ---- */ +/* get the MDREFR settings */ + ldr r2, =CFG_MDREFR_VAL + str r2, [r1, #MDREFR_OFFSET] + +/* fetch platform value of MDCNFG */ + ldr r2, =CFG_MDCNFG_VAL + +/* disable all sdram banks */ + bic r2, r2, #(MDCNFG_DE0 | MDCNFG_DE1) + bic r2, r2, #(MDCNFG_DE2 | MDCNFG_DE3) + +/* write initial value of MDCNFG, w/o enabling sdram banks */ + str r2, [r1, #MDCNFG_OFFSET] + +/* pause for 200 uSecs */ + ldr r3, =OSCR /* reset the OS Timer Count to zero */ + mov r2, #0 + str r2, [r3] + ldr r4, =0x300 /* about 200 usec */ +1: + ldr r2, [r3] + cmp r4, r2 + bgt 1b + +/* Access memory *not yet enabled* for CBR refresh cycles (8) */ +/* CBR is generated for all banks */ + + ldr r2, =CFG_DRAM_BASE + str r2, [r2] + str r2, [r2] + str r2, [r2] + str r2, [r2] + str r2, [r2] + str r2, [r2] + str r2, [r2] + str r2, [r2] + +/* get memory controller base address */ + ldr r2, =MEMC_BASE + +/* Enable SDRAM bank 0 in MDCNFG register */ + ldr r2, [r1, #MDCNFG_OFFSET] + orr r2, r2, #MDCNFG_DE0 + str r2, [r1, #MDCNFG_OFFSET] + +/* write MDMRS to trigger an MSR command to all enabled SDRAM banks */ + ldr r2, =CFG_MDMRS_VAL + str r2, [r1, #MDMRS_OFFSET] + +/* ---- INTERRUPT INITIALISATION ---- */ +/* Disable (mask) all interrupts at the interrupt controller */ +/* clear the interrupt level register (use IRQ, not FIQ) */ + mov r1, #0 + ldr r2, =ICLR + str r1, [r2] + +/* Set interrupt mask register */ + ldr r1, =CFG_ICMR_VAL + ldr r2, =ICMR + str r1, [r2] + +/* ---- CLOCK INITIALISATION ---- */ +/* Disable the peripheral clocks, and set the core clock */ + +/* Turn Off ALL on-chip peripheral clocks for re-configuration */ + ldr r1, =CKEN + mov r2, #0 + str r2, [r1] + +/* set core clocks */ + ldr r2, =CFG_CCCR_VAL + ldr r1, =CCCR + str r2, [r1] + +#ifdef ENABLE32KHZ +/* enable the 32Khz oscillator for RTC and PowerManager */ + ldr r1, =OSCC + mov r2, #OSCC_OON + str r2, [r1] + +/* NOTE: spin here until OSCC.OOK get set, meaning the PLL has settled. */ +60: + ldr r2, [r1] + ands r2, r2, #1 + beq 60b +#endif + +/* Turn on needed clocks */ + ldr r1, =CKEN + ldr r2, =CFG_CKEN_VAL + str r2, [r1] + + mov pc, r10 diff --git a/board/xsengine/memsetup.S b/board/xsengine/memsetup.S deleted file mode 100644 index b94711846e..0000000000 --- a/board/xsengine/memsetup.S +++ /dev/null @@ -1,221 +0,0 @@ -#include -#include -#include - -DRAM_SIZE: .long CFG_DRAM_SIZE - -.globl memsetup -memsetup: - - mov r10, lr - -/* ---- GPIO INITIALISATION ---- */ -/* Set up GPIO pins first (3 groups [31:0] [63:32] [80:64]) */ - - /* General purpose set registers */ - ldr r0, =GPSR0 - ldr r1, =CFG_GPSR0_VAL - str r1, [r0] - ldr r0, =GPSR1 - ldr r1, =CFG_GPSR1_VAL - str r1, [r0] - ldr r0, =GPSR2 - ldr r1, =CFG_GPSR2_VAL - str r1, [r0] - - /* General purpose clear registers */ - ldr r0, =GPCR0 - ldr r1, =CFG_GPCR0_VAL - str r1, [r0] - ldr r0, =GPCR1 - ldr r1, =CFG_GPCR1_VAL - str r1, [r0] - ldr r0, =GPCR2 - ldr r1, =CFG_GPCR2_VAL - str r1, [r0] - - /* General rising edge registers */ - ldr r0, =GRER0 - ldr r1, =CFG_GRER0_VAL - str r1, [r0] - ldr r0, =GRER1 - ldr r1, =CFG_GRER1_VAL - str r1, [r0] - ldr r0, =GRER2 - ldr r1, =CFG_GRER2_VAL - str r1, [r0] - - /* General falling edge registers */ - ldr r0, =GFER0 - ldr r1, =CFG_GFER0_VAL - str r1, [r0] - ldr r0, =GFER1 - ldr r1, =CFG_GFER1_VAL - str r1, [r0] - ldr r0, =GFER2 - ldr r1, =CFG_GFER2_VAL - str r1, [r0] - - /* General edge detect registers */ - ldr r0, =GPDR0 - ldr r1, =CFG_GPDR0_VAL - str r1, [r0] - ldr r0, =GPDR1 - ldr r1, =CFG_GPDR1_VAL - str r1, [r0] - ldr r0, =GPDR2 - ldr r1, =CFG_GPDR2_VAL - str r1, [r0] - - /* General alternate function registers */ - ldr r0, =GAFR0_L /* [0:15] */ - ldr r1, =CFG_GAFR0_L_VAL - str r1, [r0] - ldr r0, =GAFR0_U /* [31:16] */ - ldr r1, =CFG_GAFR0_U_VAL - str r1, [r0] - ldr r0, =GAFR1_L /* [47:32] */ - ldr r1, =CFG_GAFR1_L_VAL - str r1, [r0] - ldr r0, =GAFR1_U /* [63:48] */ - ldr r1, =CFG_GAFR1_U_VAL - str r1, [r0] - ldr r0, =GAFR2_L /* [79:64] */ - ldr r1, =CFG_GAFR2_L_VAL - str r1, [r0] - ldr r0, =GAFR2_U /* [80] */ - ldr r1, =CFG_GAFR2_U_VAL - str r1, [r0] - - /* General purpose direction registers */ - ldr r0, =GPDR0 - ldr r1, =CFG_GPDR0_VAL - str r1, [r0] - ldr r0, =GPDR1 - ldr r1, =CFG_GPDR1_VAL - str r1, [r0] - ldr r0, =GPDR2 - ldr r1, =CFG_GPDR2_VAL - str r1, [r0] - - /* Power manager sleep status */ - ldr r0, =PSSR - ldr r1, =CFG_PSSR_VAL - str r1, [r0] - -/* ---- MEMORY INITIALISATION ---- */ -/* Initialize Memory Controller, see PXA250 Operating System Developer's Guide */ -/* pause for 200 uSecs- allow internal clocks to settle */ - ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 /* really 0x2E1 is about 200usec, so 0x300 should be plenty */ -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - -mem_init: -/* get memory controller base address */ - ldr r1, =MEMC_BASE - -/* ---- FLASH INITIALISATION ---- */ -/* Write MSC0 and read back to ensure data change is accepted by cpu */ - ldr r2, =CFG_MSC0_VAL - str r2, [r1, #MSC0_OFFSET] - ldr r2, [r1, #MSC0_OFFSET] - -/* ---- SDRAM INITIALISATION ---- */ -/* get the MDREFR settings */ - ldr r2, =CFG_MDREFR_VAL - str r2, [r1, #MDREFR_OFFSET] - -/* fetch platform value of MDCNFG */ - ldr r2, =CFG_MDCNFG_VAL - -/* disable all sdram banks */ - bic r2, r2, #(MDCNFG_DE0 | MDCNFG_DE1) - bic r2, r2, #(MDCNFG_DE2 | MDCNFG_DE3) - -/* write initial value of MDCNFG, w/o enabling sdram banks */ - str r2, [r1, #MDCNFG_OFFSET] - -/* pause for 200 uSecs */ - ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 /* about 200 usec */ -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - -/* Access memory *not yet enabled* for CBR refresh cycles (8) */ -/* CBR is generated for all banks */ - - ldr r2, =CFG_DRAM_BASE - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - -/* get memory controller base address */ - ldr r2, =MEMC_BASE - -/* Enable SDRAM bank 0 in MDCNFG register */ - ldr r2, [r1, #MDCNFG_OFFSET] - orr r2, r2, #MDCNFG_DE0 - str r2, [r1, #MDCNFG_OFFSET] - -/* write MDMRS to trigger an MSR command to all enabled SDRAM banks */ - ldr r2, =CFG_MDMRS_VAL - str r2, [r1, #MDMRS_OFFSET] - -/* ---- INTERRUPT INITIALISATION ---- */ -/* Disable (mask) all interrupts at the interrupt controller */ -/* clear the interrupt level register (use IRQ, not FIQ) */ - mov r1, #0 - ldr r2, =ICLR - str r1, [r2] - -/* Set interrupt mask register */ - ldr r1, =CFG_ICMR_VAL - ldr r2, =ICMR - str r1, [r2] - -/* ---- CLOCK INITIALISATION ---- */ -/* Disable the peripheral clocks, and set the core clock */ - -/* Turn Off ALL on-chip peripheral clocks for re-configuration */ - ldr r1, =CKEN - mov r2, #0 - str r2, [r1] - -/* set core clocks */ - ldr r2, =CFG_CCCR_VAL - ldr r1, =CCCR - str r2, [r1] - -#ifdef ENABLE32KHZ -/* enable the 32Khz oscillator for RTC and PowerManager */ - ldr r1, =OSCC - mov r2, #OSCC_OON - str r2, [r1] - -/* NOTE: spin here until OSCC.OOK get set, meaning the PLL has settled. */ -60: - ldr r2, [r1] - ands r2, r2, #1 - beq 60b -#endif - -/* Turn on needed clocks */ - ldr r1, =CKEN - ldr r2, =CFG_CKEN_VAL - str r2, [r1] - - mov pc, r10 diff --git a/cpu/arm720t/start.S b/cpu/arm720t/start.S index bde936a751..0e15965df6 100644 --- a/cpu/arm720t/start.S +++ b/cpu/arm720t/start.S @@ -316,10 +316,10 @@ cpu_init_crit: /* * before relocating, we have to setup RAM timing * because memory timing is board-dependent, you will - * find a memsetup.S in your board directory. + * find a lowlevel_init.S in your board directory. */ mov ip, lr - bl memsetup + bl lowlevel_init mov lr, ip mov pc, lr diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S index f348193642..a7cabf8f32 100644 --- a/cpu/arm920t/start.S +++ b/cpu/arm920t/start.S @@ -257,10 +257,10 @@ cpu_init_crit: /* * before relocating, we have to setup RAM timing * because memory timing is board-dependend, you will - * find a memsetup.S in your board directory. + * find a lowlevel_init.S in your board directory. */ mov ip, lr - bl memsetup + bl lowlevel_init mov lr, ip mov pc, lr diff --git a/cpu/at91rm9200/lowlevel.S b/cpu/at91rm9200/lowlevel.S index 030f9e194a..c8af7a602a 100644 --- a/cpu/at91rm9200/lowlevel.S +++ b/cpu/at91rm9200/lowlevel.S @@ -30,7 +30,7 @@ #include #include -#ifdef CONFIG_BOOTBINFUNC +#ifdef CONFIG_INIT_CRITICAL /* * some parameters for the board * @@ -197,4 +197,4 @@ SMRDATA1: .word SDRAM .word SDRAM_VAL /* SMRDATA1 is 176 bytes long */ -#endif /* CONFIG_BOOTBINFUNC */ +#endif /* CONFIG_INIT_CRITICAL */ diff --git a/cpu/at91rm9200/start.S b/cpu/at91rm9200/start.S index 0dbc0094a4..e897e6b9c9 100644 --- a/cpu/at91rm9200/start.S +++ b/cpu/at91rm9200/start.S @@ -115,7 +115,7 @@ reset: orr r0,r0,#0xd3 /* was 13 */ msr cpsr,r0 -#ifdef CONFIG_BOOTBINFUNC +#ifdef CONFIG_INIT_CRITICAL /* scratch stack */ ldr r1, =0x00204000 /* Insure word alignment */ @@ -141,7 +141,7 @@ reset: orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache orr r0, r0, #0xC0000000 @ set bits 31:30 (iA, nF) mcr p15, 0, r0, c1, c0, 0 @ write r0 in cp15 control register (cp15 r1) -#endif /* CONFIG_BOOTBINFUNC */ +#endif /* CONFIG_INIT_CRITICAL */ /* * relocate exeception table */ @@ -160,9 +160,7 @@ copyex: */ #ifdef CONFIG_INIT_CRITICAL bl cpu_init_crit -#endif -#ifdef CONFIG_BOOTBINFUNC relocate: /* relocate U-Boot to RAM */ adr r0, _start /* r0 <- current position of code */ ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ @@ -179,7 +177,7 @@ copy_loop: stmia r1!, {r3-r10} /* copy to target address [r1] */ cmp r0, r2 /* until source end addreee [r2] */ ble copy_loop -#endif /* CONFIG_BOOTBINFUNC */ +#endif /* CONFIG_INIT_CRITICAL */ /* Set up the stack */ stack_setup: diff --git a/cpu/lh7a40x/start.S b/cpu/lh7a40x/start.S index 4f023a59fe..5dca77363f 100644 --- a/cpu/lh7a40x/start.S +++ b/cpu/lh7a40x/start.S @@ -229,10 +229,10 @@ cpu_init_crit: /* * before relocating, we have to setup RAM timing * because memory timing is board-dependend, you will - * find a memsetup.S in your board directory. + * find a lowlevel_init.S in your board directory. */ mov ip, lr - bl memsetup + bl lowlevel_init mov lr, ip mov pc, lr diff --git a/cpu/mips/start.S b/cpu/mips/start.S index 45a90a80fa..ff105a4184 100644 --- a/cpu/mips/start.S +++ b/cpu/mips/start.S @@ -243,7 +243,7 @@ reset: /* Initialize any external memory. */ - bal memsetup + bal lowlevel_init nop /* Initialize caches... diff --git a/cpu/pxa/start.S b/cpu/pxa/start.S index d74f41ff38..da753a18da 100644 --- a/cpu/pxa/start.S +++ b/cpu/pxa/start.S @@ -218,10 +218,10 @@ setspeed_done: /* * before relocating, we have to setup RAM timing * because memory timing is board-dependend, you will - * find a memsetup.S in your board directory. + * find a lowlevel_init.S in your board directory. */ mov ip, lr - bl memsetup + bl lowlevel_init mov lr, ip /* Memory interfaces are working. Disable MMU and enable I-cache. */ diff --git a/cpu/s3c44b0/start.S b/cpu/s3c44b0/start.S index b4b7c3f62c..fc7f59228a 100644 --- a/cpu/s3c44b0/start.S +++ b/cpu/s3c44b0/start.S @@ -117,9 +117,9 @@ reset: /* * before relocating, we have to setup RAM timing * because memory timing is board-dependend, you will - * find a memsetup.S in your board directory. + * find a lowlevel_init.S in your board directory. */ - bl memsetup + bl lowlevel_init #endif relocate: /* relocate U-Boot to RAM */ diff --git a/cpu/sa1100/start.S b/cpu/sa1100/start.S index 7974344070..08e41c7d79 100644 --- a/cpu/sa1100/start.S +++ b/cpu/sa1100/start.S @@ -213,10 +213,10 @@ cpu_init_crit: /* * before relocating, we have to setup RAM timing * because memory timing is board-dependend, you will - * find a memsetup.S in your board directory. + * find a lowlevel_init.S in your board directory. */ mov ip, lr - bl memsetup + bl lowlevel_init mov lr, ip /* diff --git a/doc/README.modnet50 b/doc/README.modnet50 index d8d9c9d821..30338ce8cc 100644 --- a/doc/README.modnet50 +++ b/doc/README.modnet50 @@ -47,7 +47,7 @@ Files: cpu/arm720t/serial_netarm.c .. serial I/O for the cpu -board/modnet50/memsetup.S .. memory setup for ModNET50 +board/modnet50/lowlevel_init.S .. memory setup for ModNET50 board/modnet50/flash.c .. flash routines board/modnet50/modnet50.c .. some board init stuff diff --git a/include/configs/B2.h b/include/configs/B2.h index 2fc97b27c2..b031826f3f 100644 --- a/include/configs/B2.h +++ b/include/configs/B2.h @@ -34,7 +34,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/SX1.h b/include/configs/SX1.h index de7f387817..7c51a1b040 100644 --- a/include/configs/SX1.h +++ b/include/configs/SX1.h @@ -27,7 +27,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index 9ca80ab670..2c664d5936 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -33,7 +33,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h index 8146fe723d..d32ec34fc2 100644 --- a/include/configs/at91rm9200dk.h +++ b/include/configs/at91rm9200dk.h @@ -29,7 +29,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* ARM asynchronous clock */ #define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */ @@ -44,10 +44,7 @@ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 -/* define this to include the functionality of boot.bin in u-boot */ -#undef CONFIG_BOOTBINFUNC - -#ifdef CONFIG_BOOTBINFUNC +#ifdef CONFIG_INIT_CRITICAL #define CFG_USE_MAIN_OSCILLATOR 1 /* flash */ #define MC_PUIA_VAL 0x00000000 @@ -77,7 +74,7 @@ #define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ #define SDRC_MR_VAL3 0x00000000 /* Normal Mode */ #define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#endif +#endif /* CONFIG_INIT_CRITICAL */ /* * Size of malloc() pool */ @@ -180,19 +177,19 @@ #define CFG_ENV_SIZE 0x2000 /* 0x8000 */ #else #define CFG_ENV_IS_IN_FLASH 1 -#ifdef CONFIG_BOOTBINFUNC +#ifdef CONFIG_INIT_CRITICAL #define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x60000) /* after u-boot.bin */ #define CFG_ENV_SIZE 0x10000 /* sectors are 64K here */ #else #define CFG_ENV_ADDR (PHYS_FLASH_1 + 0xe000) /* between boot.bin and u-boot.bin.gz */ #define CFG_ENV_SIZE 0x2000 /* 0x8000 */ -#endif -#endif +#endif /* CONFIG_INIT_CRITICAL */ +#endif /* CFG_ENV_IS_IN_DATAFLASH */ #define CFG_LOAD_ADDR 0x21000000 /* default load address */ -#ifdef CONFIG_BOOTBINFUNC +#ifdef CONFIG_INIT_CRITICAL #define CFG_BOOT_SIZE 0x00 /* 0 KBytes */ #define CFG_U_BOOT_BASE PHYS_FLASH_1 #define CFG_U_BOOT_SIZE 0x60000 /* 384 KBytes */ @@ -200,7 +197,7 @@ #define CFG_BOOT_SIZE 0x6000 /* 24 KBytes */ #define CFG_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000) #define CFG_U_BOOT_SIZE 0x10000 /* 64 KBytes */ -#endif +#endif /* CONFIG_INIT_CRITICAL */ #define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h index 34efc384b9..5a0f460e68 100644 --- a/include/configs/cmc_pu2.h +++ b/include/configs/cmc_pu2.h @@ -29,7 +29,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* ARM asynchronous clock */ #define AT91C_MAIN_CLOCK 207360000 /* from 18.432 MHz crystal (18432000 / 4 * 45) */ @@ -44,15 +44,7 @@ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 -/* define this to include the functionality of boot.bin in u-boot */ -#define CONFIG_BOOTBINFUNC - -/* just to make sure */ -#ifndef CONFIG_BOOTBINFUNC -#define CONFIG_BOOTBINFUNC -#endif - -#ifdef CONFIG_BOOTBINFUNC +#ifdef CONFIG_INIT_CRITICAL #define CFG_USE_MAIN_OSCILLATOR 1 /* flash */ #define MC_PUIA_VAL 0x00000000 @@ -82,7 +74,7 @@ #define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ #define SDRC_MR_VAL3 0x00000000 /* Normal Mode */ #define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#endif +#endif /* CONFIG_INIT_CRITICAL */ /* * Size of malloc() pool diff --git a/include/configs/cradle.h b/include/configs/cradle.h index 2cec4c7c51..ca7a97b562 100644 --- a/include/configs/cradle.h +++ b/include/configs/cradle.h @@ -32,7 +32,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options @@ -306,7 +306,7 @@ #else #define CFG_MDCNFG_VAL 0x00001aa1 /* FIXME can DTC be 01? */ #define CFG_MDMRS_VAL 0x00000000 -#define CFG_MDREFR_VAL 0x00403018 /* Initial setting, individual bits set in memsetup.S */ +#define CFG_MDREFR_VAL 0x00403018 /* Initial setting, individual bits set in lowlevel_init.S */ #endif /* diff --git a/include/configs/csb226.h b/include/configs/csb226.h index 1b39d23c88..0b2b251bae 100644 --- a/include/configs/csb226.h +++ b/include/configs/csb226.h @@ -37,7 +37,7 @@ * If we are developing, we might want to start U-Boot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/dnp1110.h b/include/configs/dnp1110.h index f3a871bda3..b14e35b628 100644 --- a/include/configs/dnp1110.h +++ b/include/configs/dnp1110.h @@ -31,8 +31,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ -#undef CONFIG_INIT_CRITICAL /* undef for developing */ +#undef CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/ep7312.h b/include/configs/ep7312.h index d9dd620c1c..41ad3943e1 100644 --- a/include/configs/ep7312.h +++ b/include/configs/ep7312.h @@ -31,7 +31,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/evb4510.h b/include/configs/evb4510.h index 24b1779b4c..9e0ed51fa4 100644 --- a/include/configs/evb4510.h +++ b/include/configs/evb4510.h @@ -33,7 +33,7 @@ * Also swap the flash1 and flash2 addresses during debug. * */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/gcplus.h b/include/configs/gcplus.h index 618b25ae2d..dbb8dec85d 100644 --- a/include/configs/gcplus.h +++ b/include/configs/gcplus.h @@ -38,7 +38,7 @@ * e.g. bootp/tftp download of the kernel is a far more convenient * when testing new kernels on this target. However the ADS GCPlus Linux * boot ROM leaves the MMU enabled when it passes control to U-Boot. So - * we use memsetup (CONFIG_INIT_CRITICAL) to remedy that problem. + * we use lowlevel_init (CONFIG_INIT_CRITICAL) to remedy that problem. */ #define CONFIG_INIT_CRITICAL diff --git a/include/configs/impa7.h b/include/configs/impa7.h index b4c1edfa3d..dbc951de65 100644 --- a/include/configs/impa7.h +++ b/include/configs/impa7.h @@ -31,7 +31,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/innokom.h b/include/configs/innokom.h index f884519221..a3d36a0d8f 100644 --- a/include/configs/innokom.h +++ b/include/configs/innokom.h @@ -34,7 +34,7 @@ * If we are developing, we might want to start U-Boot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/ixdp425.h b/include/configs/ixdp425.h index 1add778e5f..a8067f6ef2 100644 --- a/include/configs/ixdp425.h +++ b/include/configs/ixdp425.h @@ -41,7 +41,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ diff --git a/include/configs/lart.h b/include/configs/lart.h index c98f3777ca..3c9895ab27 100644 --- a/include/configs/lart.h +++ b/include/configs/lart.h @@ -31,7 +31,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/logodl.h b/include/configs/logodl.h index 2aee461fdd..b320a4050d 100644 --- a/include/configs/logodl.h +++ b/include/configs/logodl.h @@ -34,7 +34,7 @@ * If we are developing, we might want to start U-Boot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/lpd7a400.h b/include/configs/lpd7a400.h index 808fe1c7b0..6f2c32c546 100644 --- a/include/configs/lpd7a400.h +++ b/include/configs/lpd7a400.h @@ -27,7 +27,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL #undef CONFIG_USE_IRQ diff --git a/include/configs/lpd7a404.h b/include/configs/lpd7a404.h index de465ea368..e6855fb1ef 100644 --- a/include/configs/lpd7a404.h +++ b/include/configs/lpd7a404.h @@ -27,7 +27,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL #undef CONFIG_USE_IRQ diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h index efe205de4c..536a175bd6 100644 --- a/include/configs/lubbock.h +++ b/include/configs/lubbock.h @@ -34,7 +34,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/modnet50.h b/include/configs/modnet50.h index fd1b47c4fc..166aa1180c 100644 --- a/include/configs/modnet50.h +++ b/include/configs/modnet50.h @@ -31,7 +31,7 @@ * If we are developing, we might want to start u-boot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h index 3f1419e5ab..f7ccea3d45 100644 --- a/include/configs/mx1ads.h +++ b/include/configs/mx1ads.h @@ -32,7 +32,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/ns9750dev.h b/include/configs/ns9750dev.h index 11d21b20d1..af39e2e88d 100644 --- a/include/configs/ns9750dev.h +++ b/include/configs/ns9750dev.h @@ -31,7 +31,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h index 88d6c462b4..552beedc5c 100644 --- a/include/configs/omap1510inn.h +++ b/include/configs/omap1510inn.h @@ -30,7 +30,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/omap1610h2.h b/include/configs/omap1610h2.h index beff6d89d7..9b822152c2 100644 --- a/include/configs/omap1610h2.h +++ b/include/configs/omap1610h2.h @@ -30,7 +30,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/omap1610inn.h b/include/configs/omap1610inn.h index d0608ddef9..c00976efd1 100644 --- a/include/configs/omap1610inn.h +++ b/include/configs/omap1610inn.h @@ -30,7 +30,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h index 43be807f6a..cd2dbf18b8 100644 --- a/include/configs/omap5912osk.h +++ b/include/configs/omap5912osk.h @@ -30,8 +30,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ - -#define CONFIG_INIT_CRITICAL /*undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/omap730p2.h b/include/configs/omap730p2.h index ace380fe2f..1bdea6c5ab 100644 --- a/include/configs/omap730p2.h +++ b/include/configs/omap730p2.h @@ -32,7 +32,7 @@ * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/pleb2.h b/include/configs/pleb2.h index f7338034b7..9ba19c8506 100644 --- a/include/configs/pleb2.h +++ b/include/configs/pleb2.h @@ -34,7 +34,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options @@ -208,8 +208,8 @@ #define CFG_MDCNFG_VAL 0x00000aC9 /* Memory timings for the SDRAM. tRP=2, CL=2, tRCD=2, tRAS=5, tRC=8 */ -#define CFG_MDREFR_VAL 0x00403018 /* Initial setting, individual - bits set in memsetup.S */ +#define CFG_MDREFR_VAL 0x00403018 /* Initial setting, individual */ + /* bits set in lowlevel_init.S */ #define CFG_MDMRS_VAL 0x00000000 /* diff --git a/include/configs/shannon.h b/include/configs/shannon.h index 7afe62d7cc..8a4e3709b1 100644 --- a/include/configs/shannon.h +++ b/include/configs/shannon.h @@ -37,7 +37,7 @@ * bring us to live */ #define CONFIG_INFERNO /* we are using the inferno bootldr */ -#undef CONFIG_INIT_CRITICAL /* undef for developing */ +#undef CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/smdk2400.h b/include/configs/smdk2400.h index b95b8c073c..f477575be8 100644 --- a/include/configs/smdk2400.h +++ b/include/configs/smdk2400.h @@ -34,7 +34,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h index 7e3a02d29b..2a1cd7707a 100644 --- a/include/configs/smdk2410.h +++ b/include/configs/smdk2410.h @@ -33,7 +33,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/suzaku.h b/include/configs/suzaku.h index e8c437364f..6fda7b96fd 100644 --- a/include/configs/suzaku.h +++ b/include/configs/suzaku.h @@ -29,7 +29,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/trab.h b/include/configs/trab.h index 137d934677..2f59260564 100644 --- a/include/configs/trab.h +++ b/include/configs/trab.h @@ -40,7 +40,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/wepep250.h b/include/configs/wepep250.h index a8a8ee535c..ca32efb3c4 100644 --- a/include/configs/wepep250.h +++ b/include/configs/wepep250.h @@ -27,7 +27,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL #define CONFIG_PXA250 1 /* this is an PXA250 CPU */ #define CONFIG_WEPEP250 1 /* config for wepep250 board */ diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h index fc3739f41d..1177003c80 100644 --- a/include/configs/xaeniax.h +++ b/include/configs/xaeniax.h @@ -40,7 +40,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* #undef CONFIG_INIT_CRITICAL diff --git a/include/configs/xm250.h b/include/configs/xm250.h index 10f69d998e..1be7dd46a7 100644 --- a/include/configs/xm250.h +++ b/include/configs/xm250.h @@ -32,7 +32,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options @@ -330,7 +330,7 @@ #define CFG_MSC2_VAL 0x35f435fc /* IDE / BCR + WatchDog (cs4)/(cS5) */ #define CFG_MDCNFG_VAL 0x000009c9 #define CFG_MDMRS_VAL 0x00220022 -#define CFG_MDREFR_VAL 0x000da018 /* Initial setting, individual bits set in memsetup.S */ +#define CFG_MDREFR_VAL 0x000da018 /* Initial setting, individual bits set in lowlevel_init.S */ /* * PCMCIA and CF Interfaces (NOT USED, these values from lubbock init) diff --git a/include/configs/xsengine.h b/include/configs/xsengine.h index 87d2c942d7..6b15766daa 100644 --- a/include/configs/xsengine.h +++ b/include/configs/xsengine.h @@ -32,7 +32,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* High Level Configuration Options */ #define CONFIG_PXA250 1 /* This is an PXA250 CPU */