From: Jean-Christophe PLAGNIOL-VILLARD Date: Sun, 10 Feb 2008 16:05:20 +0000 (+0100) Subject: xsengine: fix typo and few coding style X-Git-Tag: v1.3.2-rc1~4 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=4124382de029d361162a4b8cecc773eb8f26e2a8;p=u-boot xsengine: fix typo and few coding style Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- diff --git a/include/configs/xsengine.h b/include/configs/xsengine.h index d167e0174e..4d1bdd7b14 100644 --- a/include/configs/xsengine.h +++ b/include/configs/xsengine.h @@ -33,7 +33,7 @@ #define CONFIG_XSENGINE 1 #define CONFIG_MMC 1 #define CONFIG_DOS_PARTITION 1 -#define OARD_LATE_INIT 1 +#define BOARD_LATE_INIT 1 #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ @@ -86,8 +86,8 @@ #define CFG_ENV_SIZE 0x4000 /* 16kB Total Size of Environment Sector */ /* timeout values are in ticks */ -#define CFG_FLASH_ERASE_TOUT (75*CFG_HZ) /* Timeout for Flash Erase */ -#define CFG_FLASH_WRITE_TOUT (50*CFG_HZ) /* Timeout for Flash Write */ +#define CFG_FLASH_ERASE_TOUT (75*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (50*CFG_HZ) /* Timeout for Flash Write */ /* Size of malloc() pool */ #define CFG_MALLOC_LEN (CFG_ENV_SIZE + 256*1024) @@ -96,7 +96,7 @@ /* Hardware drivers */ #define CONFIG_DRIVER_SMC91111 #define CONFIG_SMC91111_BASE 0x04000300 -#define CONFIG_SMC_USE_32_BIT 1 +#define CONFIG_SMC_USE_32_BIT 1 /* select serial console configuration */ #define CONFIG_FFUART 1 @@ -138,15 +138,15 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "XS-Engine u-boot> " /* Monitor Command Prompt */ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_MEMTEST_START 0xA0400000 /* memtest works on */ #define CFG_MEMTEST_END 0xA0800000 /* 4 ... 8 MB in DRAM */ -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* valid baudrates */ #define CFG_MMC_BASE 0xF0000000 -#define CFG_LOAD_ADDR 0xA0000000 /* load kernel to this address */ +#define CFG_LOAD_ADDR 0xA0000000 /* load kernel to this address */ /* Stack sizes - The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ @@ -168,7 +168,7 @@ /* GP direction register */ #define CFG_GPDR0_VAL 0x0000A000 /* CS1, PROG(FPGA) */ #define CFG_GPDR1_VAL 0x00022A80 /* nPWE, FFUART + BTUART pins */ -#define CFG_GPDR2_VAL 0x0000C000 /* CS2, CS3 */ +#define CFG_GPDR2_VAL 0x0000C000 /* CS2, CS3 */ /* GP rising edge detect register */ #define CFG_GRER0_VAL 0x00000000 @@ -185,7 +185,7 @@ #define CFG_GAFR0_U_VAL 0x00000010 /* RDY */ #define CFG_GAFR1_L_VAL 0x09988050 /* FFUART + BTUART pins */ #define CFG_GAFR1_U_VAL 0x00000008 /* nPWE */ -#define CFG_GAFR2_L_VAL 0xA0000000 /* CS2, CS3 */ +#define CFG_GAFR2_L_VAL 0xA0000000 /* CS2, CS3 */ #define CFG_GAFR2_U_VAL 0x00000000 #define CFG_PSSR_VAL 0x00000020 /* Power manager sleep status */