From: Stefan Roese <sr@denx.de>
Date: Tue, 11 Aug 2015 07:36:15 +0000 (+0200)
Subject: arm: mvebu: db-mv784mp-gp: Enable PCI support
X-Git-Tag: v2015.10-rc2~1^2~1
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=41e705ac799a40d6f58d0e38e5a295fb20d5a226;p=u-boot

arm: mvebu: db-mv784mp-gp: Enable PCI support

This patch enabled the MVEBU PCIe support on the db-mv784mp-gp AXP
eval board. It also enabled the Intel E1000 driver support and
adds the initialization of PCIe network controllers to the
board code.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Anton Schubert <anton.schubert@gmx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
---

diff --git a/board/Marvell/db-mv784mp-gp/db-mv784mp-gp.c b/board/Marvell/db-mv784mp-gp/db-mv784mp-gp.c
index 78c7b7e4e6..d7aa1499ad 100644
--- a/board/Marvell/db-mv784mp-gp/db-mv784mp-gp.c
+++ b/board/Marvell/db-mv784mp-gp/db-mv784mp-gp.c
@@ -6,6 +6,7 @@
 
 #include <common.h>
 #include <miiphy.h>
+#include <netdev.h>
 #include <asm/io.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/soc.h>
@@ -80,6 +81,12 @@ int checkboard(void)
 	return 0;
 }
 
+int board_eth_init(bd_t *bis)
+{
+	cpu_eth_init(bis); /* Built in controller(s) come first */
+	return pci_eth_init(bis);
+}
+
 #ifdef CONFIG_RESET_PHY_R
 /* Configure and enable MV88E1545 PHY */
 void reset_phy(void)
diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h
index f4e669dd79..eec2ba933f 100644
--- a/include/configs/db-mv784mp-gp.h
+++ b/include/configs/db-mv784mp-gp.h
@@ -33,6 +33,7 @@
 #define CONFIG_CMD_ENV
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_IDE
+#define CONFIG_CMD_PCI
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_SF
 #define CONFIG_CMD_SPI
@@ -102,6 +103,13 @@
 #define CONFIG_DOS_PARTITION
 #endif /* CONFIG_CMD_IDE */
 
+/* PCIe support */
+#define CONFIG_PCI
+#define CONFIG_PCI_MVEBU
+#define CONFIG_PCI_PNP
+#define CONFIG_PCI_SCAN_SHOW
+#define CONFIG_E1000	/* enable Intel E1000 support for testing */
+
 /*
  * mv-common.h should be defined after CMD configs since it used them
  * to enable certain macros