From: Robert Jordens Date: Thu, 3 Aug 2017 14:25:13 +0000 (+0200) Subject: digilent_jtag_smt2_nc: add support X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=43cf6f9b62be7198a92593aa4451d151405655df;p=openocd digilent_jtag_smt2_nc: add support The Digilent SMT2 NC is nominally the connector-less version of the SMT2. But neither the SMT2 configuration nor the HS3 configuration work for on the Xilinx KCU105 board where the SMT2 NC is used. Change-Id: Ieb27cbc6d8b0f9c64ef778e4e0c839acc85ec0ef Signed-off-by: Robert Jordens Reviewed-on: http://openocd.zylin.com/4187 Tested-by: jenkins Reviewed-by: Paul Fertser --- diff --git a/tcl/interface/ftdi/digilent_jtag_smt2_nc.cfg b/tcl/interface/ftdi/digilent_jtag_smt2_nc.cfg new file mode 100644 index 00000000..a83a0081 --- /dev/null +++ b/tcl/interface/ftdi/digilent_jtag_smt2_nc.cfg @@ -0,0 +1,18 @@ +# +# Digilent JTAG-SMT2-NC +# +# http://store.digilentinc.com/jtag-smt2-nc-surface-mount-programming-module/ +# https://reference.digilentinc.com/_media/jtag_smt2nc/jtag-smt2-nc_rm.pdf +# +# Based on reference sheet (above) and Xilinx KCU105 schematics +# https://www.xilinx.com/products/boards-and-kits/kcu105.html#documentation +# +# Note that the digilent_jtag_smt2 layout does not work and hangs while +# the ftdi_device_desc from digilent_hs2 is wrong. + +interface ftdi +ftdi_device_desc "Digilent USB Device" +ftdi_vid_pid 0x0403 0x6014 +ftdi_channel 0 +ftdi_layout_init 0x00e8 0x60eb +reset_config none