From: Jaehoon Chung Date: Mon, 23 Apr 2012 02:36:28 +0000 (+0000) Subject: mmc: support the sdhci instead of s5p_mmc for samsung-soc X-Git-Tag: v2012.07-rc1~145^2~1 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=442d55685e1e2310d546044a6519ae73e4ba348a;p=u-boot mmc: support the sdhci instead of s5p_mmc for samsung-soc In driver mmc, generic s5p_sdhci code is implemented. s5p_mmc file is dupulicated. we are good that use the generic sdhci. This patch supported the sdhci for Samsung-SoC. Signed-off-by: Jaehoon Chung Signed-off-by: Kyungmin Park Acked-by: Lei Wen Acked-by: Minkyu Kang --- diff --git a/arch/arm/include/asm/arch-exynos/mmc.h b/arch/arm/include/asm/arch-exynos/mmc.h index 30f82b8aaf..0f701c9012 100644 --- a/arch/arm/include/asm/arch-exynos/mmc.h +++ b/arch/arm/include/asm/arch-exynos/mmc.h @@ -21,53 +21,54 @@ #ifndef __ASM_ARCH_MMC_H_ #define __ASM_ARCH_MMC_H_ -#ifndef __ASSEMBLY__ -struct s5p_mmc { - unsigned int sysad; - unsigned short blksize; - unsigned short blkcnt; - unsigned int argument; - unsigned short trnmod; - unsigned short cmdreg; - unsigned int rspreg0; - unsigned int rspreg1; - unsigned int rspreg2; - unsigned int rspreg3; - unsigned int bdata; - unsigned int prnsts; - unsigned char hostctl; - unsigned char pwrcon; - unsigned char blkgap; - unsigned char wakcon; - unsigned short clkcon; - unsigned char timeoutcon; - unsigned char swrst; - unsigned int norintsts; /* errintsts */ - unsigned int norintstsen; /* errintstsen */ - unsigned int norintsigen; /* errintsigen */ - unsigned short acmd12errsts; - unsigned char res1[2]; - unsigned int capareg; - unsigned char res2[4]; - unsigned int maxcurr; - unsigned char res3[0x34]; - unsigned int control2; - unsigned int control3; - unsigned char res4[4]; - unsigned int control4; - unsigned char res5[0x6e]; - unsigned short hcver; - unsigned char res6[0xFF00]; -}; +#define SDHCI_CONTROL2 0x80 +#define SDHCI_CONTROL3 0x84 +#define SDHCI_CONTROL4 0x8C -struct mmc_host { - struct s5p_mmc *reg; - unsigned int version; /* SDHCI spec. version */ - unsigned int clock; /* Current clock (MHz) */ - int dev_index; -}; +#define SDHCI_CTRL2_ENSTAASYNCCLR (1 << 31) +#define SDHCI_CTRL2_ENCMDCNFMSK (1 << 30) +#define SDHCI_CTRL2_CDINVRXD3 (1 << 29) +#define SDHCI_CTRL2_SLCARDOUT (1 << 28) -int s5p_mmc_init(int dev_index, int bus_width); +#define SDHCI_CTRL2_FLTCLKSEL_MASK (0xf << 24) +#define SDHCI_CTRL2_FLTCLKSEL_SHIFT (24) +#define SDHCI_CTRL2_FLTCLKSEL(_x) ((_x) << 24) -#endif /* __ASSEMBLY__ */ +#define SDHCI_CTRL2_LVLDAT_MASK (0xff << 16) +#define SDHCI_CTRL2_LVLDAT_SHIFT (16) +#define SDHCI_CTRL2_LVLDAT(_x) ((_x) << 16) + +#define SDHCI_CTRL2_ENFBCLKTX (1 << 15) +#define SDHCI_CTRL2_ENFBCLKRX (1 << 14) +#define SDHCI_CTRL2_SDCDSEL (1 << 13) +#define SDHCI_CTRL2_SDSIGPC (1 << 12) +#define SDHCI_CTRL2_ENBUSYCHKTXSTART (1 << 11) + +#define SDHCI_CTRL2_DFCNT_MASK(_x) ((_x) << 9) +#define SDHCI_CTRL2_DFCNT_SHIFT (9) + +#define SDHCI_CTRL2_ENCLKOUTHOLD (1 << 8) +#define SDHCI_CTRL2_RWAITMODE (1 << 7) +#define SDHCI_CTRL2_DISBUFRD (1 << 6) +#define SDHCI_CTRL2_SELBASECLK_MASK(_x) ((_x) << 4) +#define SDHCI_CTRL2_SELBASECLK_SHIFT (4) +#define SDHCI_CTRL2_PWRSYNC (1 << 3) +#define SDHCI_CTRL2_ENCLKOUTMSKCON (1 << 1) +#define SDHCI_CTRL2_HWINITFIN (1 << 0) + +#define SDHCI_CTRL3_FCSEL3 (1 << 31) +#define SDHCI_CTRL3_FCSEL2 (1 << 23) +#define SDHCI_CTRL3_FCSEL1 (1 << 15) +#define SDHCI_CTRL3_FCSEL0 (1 << 7) + +#define SDHCI_CTRL4_DRIVE_MASK(_x) ((_x) << 16) +#define SDHCI_CTRL4_DRIVE_SHIFT (16) + +int s5p_sdhci_init(u32 regbase, u32 max_clk, u32 min_clk, u32 quirks); + +static inline unsigned int s5p_mmc_init(int index, int bus_width) +{ + unsigned int base = samsung_get_base_mmc() + (0x10000 * index); + return s5p_sdhci_init(base, 52000000, 400000, index); +} #endif diff --git a/arch/arm/include/asm/arch-s5pc1xx/mmc.h b/arch/arm/include/asm/arch-s5pc1xx/mmc.h index adef4ee21d..0f701c9012 100644 --- a/arch/arm/include/asm/arch-s5pc1xx/mmc.h +++ b/arch/arm/include/asm/arch-s5pc1xx/mmc.h @@ -21,53 +21,54 @@ #ifndef __ASM_ARCH_MMC_H_ #define __ASM_ARCH_MMC_H_ -#ifndef __ASSEMBLY__ -struct s5p_mmc { - unsigned int sysad; - unsigned short blksize; - unsigned short blkcnt; - unsigned int argument; - unsigned short trnmod; - unsigned short cmdreg; - unsigned int rspreg0; - unsigned int rspreg1; - unsigned int rspreg2; - unsigned int rspreg3; - unsigned int bdata; - unsigned int prnsts; - unsigned char hostctl; - unsigned char pwrcon; - unsigned char blkgap; - unsigned char wakcon; - unsigned short clkcon; - unsigned char timeoutcon; - unsigned char swrst; - unsigned int norintsts; /* errintsts */ - unsigned int norintstsen; /* errintstsen */ - unsigned int norintsigen; /* errintsigen */ - unsigned short acmd12errsts; - unsigned char res1[2]; - unsigned int capareg; - unsigned char res2[4]; - unsigned int maxcurr; - unsigned char res3[0x34]; - unsigned int control2; - unsigned int control3; - unsigned char res4[4]; - unsigned int control4; - unsigned char res5[0x6e]; - unsigned short hcver; - unsigned char res6[0xFFF00]; -}; +#define SDHCI_CONTROL2 0x80 +#define SDHCI_CONTROL3 0x84 +#define SDHCI_CONTROL4 0x8C -struct mmc_host { - struct s5p_mmc *reg; - unsigned int version; /* SDHCI spec. version */ - unsigned int clock; /* Current clock (MHz) */ - int dev_index; -}; +#define SDHCI_CTRL2_ENSTAASYNCCLR (1 << 31) +#define SDHCI_CTRL2_ENCMDCNFMSK (1 << 30) +#define SDHCI_CTRL2_CDINVRXD3 (1 << 29) +#define SDHCI_CTRL2_SLCARDOUT (1 << 28) -int s5p_mmc_init(int dev_index, int bus_width); +#define SDHCI_CTRL2_FLTCLKSEL_MASK (0xf << 24) +#define SDHCI_CTRL2_FLTCLKSEL_SHIFT (24) +#define SDHCI_CTRL2_FLTCLKSEL(_x) ((_x) << 24) -#endif /* __ASSEMBLY__ */ +#define SDHCI_CTRL2_LVLDAT_MASK (0xff << 16) +#define SDHCI_CTRL2_LVLDAT_SHIFT (16) +#define SDHCI_CTRL2_LVLDAT(_x) ((_x) << 16) + +#define SDHCI_CTRL2_ENFBCLKTX (1 << 15) +#define SDHCI_CTRL2_ENFBCLKRX (1 << 14) +#define SDHCI_CTRL2_SDCDSEL (1 << 13) +#define SDHCI_CTRL2_SDSIGPC (1 << 12) +#define SDHCI_CTRL2_ENBUSYCHKTXSTART (1 << 11) + +#define SDHCI_CTRL2_DFCNT_MASK(_x) ((_x) << 9) +#define SDHCI_CTRL2_DFCNT_SHIFT (9) + +#define SDHCI_CTRL2_ENCLKOUTHOLD (1 << 8) +#define SDHCI_CTRL2_RWAITMODE (1 << 7) +#define SDHCI_CTRL2_DISBUFRD (1 << 6) +#define SDHCI_CTRL2_SELBASECLK_MASK(_x) ((_x) << 4) +#define SDHCI_CTRL2_SELBASECLK_SHIFT (4) +#define SDHCI_CTRL2_PWRSYNC (1 << 3) +#define SDHCI_CTRL2_ENCLKOUTMSKCON (1 << 1) +#define SDHCI_CTRL2_HWINITFIN (1 << 0) + +#define SDHCI_CTRL3_FCSEL3 (1 << 31) +#define SDHCI_CTRL3_FCSEL2 (1 << 23) +#define SDHCI_CTRL3_FCSEL1 (1 << 15) +#define SDHCI_CTRL3_FCSEL0 (1 << 7) + +#define SDHCI_CTRL4_DRIVE_MASK(_x) ((_x) << 16) +#define SDHCI_CTRL4_DRIVE_SHIFT (16) + +int s5p_sdhci_init(u32 regbase, u32 max_clk, u32 min_clk, u32 quirks); + +static inline unsigned int s5p_mmc_init(int index, int bus_width) +{ + unsigned int base = samsung_get_base_mmc() + (0x10000 * index); + return s5p_sdhci_init(base, 52000000, 400000, index); +} #endif diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index c245352aca..a8e681c2fe 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -39,8 +39,8 @@ COBJS-$(CONFIG_MXS_MMC) += mxsmmc.o COBJS-$(CONFIG_OMAP_HSMMC) += omap_hsmmc.o COBJS-$(CONFIG_PXA_MMC) += pxa_mmc.o COBJS-$(CONFIG_PXA_MMC_GENERIC) += pxa_mmc_gen.o -COBJS-$(CONFIG_S5P_MMC) += s5p_mmc.o COBJS-$(CONFIG_SDHCI) += sdhci.o +COBJS-$(CONFIG_S5P_SDHCI) += s5p_sdhci.o COBJS-$(CONFIG_SH_MMCIF) += sh_mmcif.o COBJS-$(CONFIG_TEGRA2_MMC) += tegra2_mmc.o diff --git a/drivers/mmc/s5p_mmc.c b/drivers/mmc/s5p_mmc.c deleted file mode 100644 index 4ae3aaf773..0000000000 --- a/drivers/mmc/s5p_mmc.c +++ /dev/null @@ -1,490 +0,0 @@ -/* - * (C) Copyright 2009 SAMSUNG Electronics - * Minkyu Kang - * Jaehoon Chung - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include - -/* support 4 mmc hosts */ -struct mmc mmc_dev[4]; -struct mmc_host mmc_host[4]; - -static inline struct s5p_mmc *s5p_get_base_mmc(int dev_index) -{ - unsigned long offset = dev_index * sizeof(struct s5p_mmc); - return (struct s5p_mmc *)(samsung_get_base_mmc() + offset); -} - -static void mmc_prepare_data(struct mmc_host *host, struct mmc_data *data) -{ - unsigned char ctrl; - - debug("data->dest: %08x\n", (u32)data->dest); - writel((u32)data->dest, &host->reg->sysad); - /* - * DMASEL[4:3] - * 00 = Selects SDMA - * 01 = Reserved - * 10 = Selects 32-bit Address ADMA2 - * 11 = Selects 64-bit Address ADMA2 - */ - ctrl = readb(&host->reg->hostctl); - ctrl &= ~(3 << 3); - writeb(ctrl, &host->reg->hostctl); - - /* We do not handle DMA boundaries, so set it to max (512 KiB) */ - writew((7 << 12) | (data->blocksize & 0xFFF), &host->reg->blksize); - writew(data->blocks, &host->reg->blkcnt); -} - -static void mmc_set_transfer_mode(struct mmc_host *host, struct mmc_data *data) -{ - unsigned short mode; - - /* - * TRNMOD - * MUL1SIN0[5] : Multi/Single Block Select - * RD1WT0[4] : Data Transfer Direction Select - * 1 = read - * 0 = write - * ENACMD12[2] : Auto CMD12 Enable - * ENBLKCNT[1] : Block Count Enable - * ENDMA[0] : DMA Enable - */ - mode = (1 << 1) | (1 << 0); - if (data->blocks > 1) - mode |= (1 << 5); - if (data->flags & MMC_DATA_READ) - mode |= (1 << 4); - - writew(mode, &host->reg->trnmod); -} - -static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, - struct mmc_data *data) -{ - struct mmc_host *host = (struct mmc_host *)mmc->priv; - int flags, i; - unsigned int timeout; - unsigned int mask; - unsigned int retry = 0x100000; - - /* Wait max 10 ms */ - timeout = 10; - - /* - * PRNSTS - * CMDINHDAT[1] : Command Inhibit (DAT) - * CMDINHCMD[0] : Command Inhibit (CMD) - */ - mask = (1 << 0); - if ((data != NULL) || (cmd->resp_type & MMC_RSP_BUSY)) - mask |= (1 << 1); - - /* - * We shouldn't wait for data inihibit for stop commands, even - * though they might use busy signaling - */ - if (data) - mask &= ~(1 << 1); - - while (readl(&host->reg->prnsts) & mask) { - if (timeout == 0) { - printf("%s: timeout error\n", __func__); - return -1; - } - timeout--; - udelay(1000); - } - - if (data) - mmc_prepare_data(host, data); - - debug("cmd->arg: %08x\n", cmd->cmdarg); - writel(cmd->cmdarg, &host->reg->argument); - - if (data) - mmc_set_transfer_mode(host, data); - - if ((cmd->resp_type & MMC_RSP_136) && (cmd->resp_type & MMC_RSP_BUSY)) - return -1; - - /* - * CMDREG - * CMDIDX[13:8] : Command index - * DATAPRNT[5] : Data Present Select - * ENCMDIDX[4] : Command Index Check Enable - * ENCMDCRC[3] : Command CRC Check Enable - * RSPTYP[1:0] - * 00 = No Response - * 01 = Length 136 - * 10 = Length 48 - * 11 = Length 48 Check busy after response - */ - if (!(cmd->resp_type & MMC_RSP_PRESENT)) - flags = 0; - else if (cmd->resp_type & MMC_RSP_136) - flags = (1 << 0); - else if (cmd->resp_type & MMC_RSP_BUSY) - flags = (3 << 0); - else - flags = (2 << 0); - - if (cmd->resp_type & MMC_RSP_CRC) - flags |= (1 << 3); - if (cmd->resp_type & MMC_RSP_OPCODE) - flags |= (1 << 4); - if (data) - flags |= (1 << 5); - - debug("cmd: %d\n", cmd->cmdidx); - - writew((cmd->cmdidx << 8) | flags, &host->reg->cmdreg); - - for (i = 0; i < retry; i++) { - mask = readl(&host->reg->norintsts); - /* Command Complete */ - if (mask & (1 << 0)) { - if (!data) - writel(mask, &host->reg->norintsts); - break; - } - } - - if (i == retry) { - printf("%s: waiting for status update\n", __func__); - return TIMEOUT; - } - - if (mask & (1 << 16)) { - /* Timeout Error */ - debug("timeout: %08x cmd %d\n", mask, cmd->cmdidx); - return TIMEOUT; - } else if (mask & (1 << 15)) { - /* Error Interrupt */ - debug("error: %08x cmd %d\n", mask, cmd->cmdidx); - return -1; - } - - if (cmd->resp_type & MMC_RSP_PRESENT) { - if (cmd->resp_type & MMC_RSP_136) { - /* CRC is stripped so we need to do some shifting. */ - for (i = 0; i < 4; i++) { - unsigned int offset = - (unsigned int)(&host->reg->rspreg3 - i); - cmd->response[i] = readl(offset) << 8; - - if (i != 3) { - cmd->response[i] |= - readb(offset - 1); - } - debug("cmd->resp[%d]: %08x\n", - i, cmd->response[i]); - } - } else if (cmd->resp_type & MMC_RSP_BUSY) { - for (i = 0; i < retry; i++) { - /* PRNTDATA[23:20] : DAT[3:0] Line Signal */ - if (readl(&host->reg->prnsts) - & (1 << 20)) /* DAT[0] */ - break; - } - - if (i == retry) { - printf("%s: card is still busy\n", __func__); - return TIMEOUT; - } - - cmd->response[0] = readl(&host->reg->rspreg0); - debug("cmd->resp[0]: %08x\n", cmd->response[0]); - } else { - cmd->response[0] = readl(&host->reg->rspreg0); - debug("cmd->resp[0]: %08x\n", cmd->response[0]); - } - } - - if (data) { - while (1) { - mask = readl(&host->reg->norintsts); - - if (mask & (1 << 15)) { - /* Error Interrupt */ - writel(mask, &host->reg->norintsts); - printf("%s: error during transfer: 0x%08x\n", - __func__, mask); - return -1; - } else if (mask & (1 << 3)) { - /* - * DMA Interrupt, restart the transfer where - * it was interrupted. - */ - unsigned int address = readl(&host->reg->sysad); - - debug("DMA end\n"); - writel((1 << 3), &host->reg->norintsts); - writel(address, &host->reg->sysad); - } else if (mask & (1 << 1)) { - /* Transfer Complete */ - debug("r/w is done\n"); - break; - } - } - writel(mask, &host->reg->norintsts); - } - - udelay(1000); - return 0; -} - -static void mmc_change_clock(struct mmc_host *host, uint clock) -{ - int div; - unsigned short clk; - unsigned long timeout; - unsigned long ctrl2; - - /* - * SELBASECLK[5:4] - * 00/01 = HCLK - * 10 = EPLL - * 11 = XTI or XEXTCLK - */ - ctrl2 = readl(&host->reg->control2); - ctrl2 &= ~(3 << 4); - ctrl2 |= (2 << 4); - writel(ctrl2, &host->reg->control2); - - writew(0, &host->reg->clkcon); - - /* XXX: we assume that clock is between 40MHz and 50MHz */ - if (clock == 0) - goto out; - else if (clock <= 400000) - div = 0x100; - else if (clock <= 20000000) - div = 4; - else if (clock <= 26000000) - div = 2; - else - div = 1; - debug("div: %d\n", div); - - div >>= 1; - /* - * CLKCON - * SELFREQ[15:8] : base clock divied by value - * ENSDCLK[2] : SD Clock Enable - * STBLINTCLK[1] : Internal Clock Stable - * ENINTCLK[0] : Internal Clock Enable - */ - clk = (div << 8) | (1 << 0); - writew(clk, &host->reg->clkcon); - - set_mmc_clk(host->dev_index, div); - - /* Wait max 10 ms */ - timeout = 10; - while (!(readw(&host->reg->clkcon) & (1 << 1))) { - if (timeout == 0) { - printf("%s: timeout error\n", __func__); - return; - } - timeout--; - udelay(1000); - } - - clk |= (1 << 2); - writew(clk, &host->reg->clkcon); - -out: - host->clock = clock; -} - -static void mmc_set_ios(struct mmc *mmc) -{ - struct mmc_host *host = mmc->priv; - unsigned char ctrl; - unsigned long val; - - debug("bus_width: %x, clock: %d\n", mmc->bus_width, mmc->clock); - - /* - * SELCLKPADDS[17:16] - * 00 = 2mA - * 01 = 4mA - * 10 = 7mA - * 11 = 9mA - */ - writel(0x3 << 16, &host->reg->control4); - - val = readl(&host->reg->control2); - val &= (0x3 << 4); - - val |= (1 << 31) | /* write status clear async mode enable */ - (1 << 30) | /* command conflict mask enable */ - (1 << 14) | /* Feedback Clock Enable for Rx Clock */ - (1 << 8); /* SDCLK hold enable */ - - writel(val, &host->reg->control2); - - /* - * FCSEL1[15] FCSEL0[7] - * FCSel[1:0] : Rx Feedback Clock Delay Control - * Inverter delay means10ns delay if SDCLK 50MHz setting - * 01 = Delay1 (basic delay) - * 11 = Delay2 (basic delay + 2ns) - * 00 = Delay3 (inverter delay) - * 10 = Delay4 (inverter delay + 2ns) - */ - writel(0x8080, &host->reg->control3); - - mmc_change_clock(host, mmc->clock); - - ctrl = readb(&host->reg->hostctl); - - /* - * WIDE8[5] - * 0 = Depend on WIDE4 - * 1 = 8-bit mode - * WIDE4[1] - * 1 = 4-bit mode - * 0 = 1-bit mode - */ - if (mmc->bus_width == 8) - ctrl |= (1 << 5); - else if (mmc->bus_width == 4) - ctrl |= (1 << 1); - else - ctrl &= ~(1 << 1); - - /* - * OUTEDGEINV[2] - * 1 = Riging edge output - * 0 = Falling edge output - */ - ctrl &= ~(1 << 2); - - writeb(ctrl, &host->reg->hostctl); -} - -static void mmc_reset(struct mmc_host *host) -{ - unsigned int timeout; - - /* - * RSTALL[0] : Software reset for all - * 1 = reset - * 0 = work - */ - writeb((1 << 0), &host->reg->swrst); - - host->clock = 0; - - /* Wait max 100 ms */ - timeout = 100; - - /* hw clears the bit when it's done */ - while (readb(&host->reg->swrst) & (1 << 0)) { - if (timeout == 0) { - printf("%s: timeout error\n", __func__); - return; - } - timeout--; - udelay(1000); - } -} - -static int mmc_core_init(struct mmc *mmc) -{ - struct mmc_host *host = (struct mmc_host *)mmc->priv; - unsigned int mask; - - mmc_reset(host); - - host->version = readw(&host->reg->hcver); - - /* mask all */ - writel(0xffffffff, &host->reg->norintstsen); - writel(0xffffffff, &host->reg->norintsigen); - - writeb(0xe, &host->reg->timeoutcon); /* TMCLK * 2^27 */ - - /* - * NORMAL Interrupt Status Enable Register init - * [5] ENSTABUFRDRDY : Buffer Read Ready Status Enable - * [4] ENSTABUFWTRDY : Buffer write Ready Status Enable - * [3] ENSTADMAINT : DMA Interrupt Status Enable - * [1] ENSTASTANSCMPLT : Transfre Complete Status Enable - * [0] ENSTACMDCMPLT : Command Complete Status Enable - */ - mask = readl(&host->reg->norintstsen); - mask &= ~(0xffff); - mask |= (1 << 5) | (1 << 4) | (1 << 3) | (1 << 1) | (1 << 0); - writel(mask, &host->reg->norintstsen); - - /* - * NORMAL Interrupt Signal Enable Register init - * [1] ENSTACMDCMPLT : Transfer Complete Signal Enable - */ - mask = readl(&host->reg->norintsigen); - mask &= ~(0xffff); - mask |= (1 << 1); - writel(mask, &host->reg->norintsigen); - - return 0; -} - -static int s5p_mmc_initialize(int dev_index, int bus_width) -{ - struct mmc *mmc; - - mmc = &mmc_dev[dev_index]; - - sprintf(mmc->name, "SAMSUNG SD/MMC"); - mmc->priv = &mmc_host[dev_index]; - mmc->send_cmd = mmc_send_cmd; - mmc->set_ios = mmc_set_ios; - mmc->init = mmc_core_init; - mmc->getcd = NULL; - - mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; - if (bus_width == 8) - mmc->host_caps = MMC_MODE_8BIT; - else - mmc->host_caps = MMC_MODE_4BIT; - mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_HC; - - mmc->f_min = 400000; - mmc->f_max = 52000000; - - mmc_host[dev_index].dev_index = dev_index; - mmc_host[dev_index].clock = 0; - mmc_host[dev_index].reg = s5p_get_base_mmc(dev_index); - mmc->b_max = 0; - mmc_register(mmc); - - return 0; -} - -int s5p_mmc_init(int dev_index, int bus_width) -{ - return s5p_mmc_initialize(dev_index, bus_width); -} diff --git a/drivers/mmc/s5p_sdhci.c b/drivers/mmc/s5p_sdhci.c new file mode 100644 index 0000000000..1d4481b974 --- /dev/null +++ b/drivers/mmc/s5p_sdhci.c @@ -0,0 +1,98 @@ +/* + * (C) Copyright 2012 SAMSUNG Electronics + * Jaehoon Chung + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include + +static char *S5P_NAME = "SAMSUNG SDHCI"; +static void s5p_sdhci_set_control_reg(struct sdhci_host *host) +{ + unsigned long val, ctrl; + /* + * SELCLKPADDS[17:16] + * 00 = 2mA + * 01 = 4mA + * 10 = 7mA + * 11 = 9mA + */ + sdhci_writel(host, SDHCI_CTRL4_DRIVE_MASK(0x3), SDHCI_CONTROL4); + + val = sdhci_readl(host, SDHCI_CONTROL2); + val &= SDHCI_CTRL2_SELBASECLK_SHIFT; + + val |= SDHCI_CTRL2_ENSTAASYNCCLR | + SDHCI_CTRL2_ENCMDCNFMSK | + SDHCI_CTRL2_ENFBCLKRX | + SDHCI_CTRL2_ENCLKOUTHOLD; + + sdhci_writel(host, val, SDHCI_CONTROL2); + + /* + * FCSEL3[31] FCSEL2[23] FCSEL1[15] FCSEL0[7] + * FCSel[1:0] : Rx Feedback Clock Delay Control + * Inverter delay means10ns delay if SDCLK 50MHz setting + * 01 = Delay1 (basic delay) + * 11 = Delay2 (basic delay + 2ns) + * 00 = Delay3 (inverter delay) + * 10 = Delay4 (inverter delay + 2ns) + */ + val = SDHCI_CTRL3_FCSEL3 | SDHCI_CTRL3_FCSEL1; + sdhci_writel(host, val, SDHCI_CONTROL3); + + /* + * SELBASECLK[5:4] + * 00/01 = HCLK + * 10 = EPLL + * 11 = XTI or XEXTCLK + */ + ctrl = sdhci_readl(host, SDHCI_CONTROL2); + ctrl &= ~SDHCI_CTRL2_SELBASECLK_MASK(0x3); + ctrl |= SDHCI_CTRL2_SELBASECLK_MASK(0x2); + sdhci_writel(host, ctrl, SDHCI_CONTROL2); +} + +int s5p_sdhci_init(u32 regbase, u32 max_clk, u32 min_clk, u32 quirks) +{ + struct sdhci_host *host = NULL; + host = (struct sdhci_host *)malloc(sizeof(struct sdhci_host)); + if (!host) { + printf("sdhci__host malloc fail!\n"); + return 1; + } + + host->name = S5P_NAME; + host->ioaddr = (void *)regbase; + host->quirks = quirks; + + host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_BROKEN_VOLTAGE; + host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; + if (quirks & SDHCI_QUIRK_REG32_RW) + host->version = sdhci_readl(host, SDHCI_HOST_VERSION - 2) >> 16; + else + host->version = sdhci_readw(host, SDHCI_HOST_VERSION); + + host->set_control_reg = &s5p_sdhci_set_control_reg; + + host->host_caps = MMC_MODE_HC; + + add_sdhci(host, max_clk, min_clk); + return 0; +}