From: Priyanka Jain Date: Thu, 28 Nov 2013 04:42:16 +0000 (+0530) Subject: powerpc: mmc: Add corenet devices support in esdhc spl X-Git-Tag: v2014.01-rc2~44^2~1 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=4520a2f28eade14b97618b37148ac615e78783df;p=u-boot powerpc: mmc: Add corenet devices support in esdhc spl Existing eSDHC SPL framework assumes booting from sd-image with boot_format header which contains final u-boot Image offset and size. No such header is present in case of corenet devices like T1040 as corenet deivces use PBI-RCW based intialization. So, for corenet deives, SPL bootloader use values provided at compilation time. These values can be defined in board specific config file. Signed-off-by: Priyanka Jain Acked-by: Pantelis Antoniou --- diff --git a/drivers/mmc/fsl_esdhc_spl.c b/drivers/mmc/fsl_esdhc_spl.c index 65c52a22db..8fc263f4f4 100644 --- a/drivers/mmc/fsl_esdhc_spl.c +++ b/drivers/mmc/fsl_esdhc_spl.c @@ -42,6 +42,10 @@ void __noreturn mmc_boot(void) hang(); } +#ifdef CONFIG_FSL_CORENET + offset = CONFIG_SYS_MMC_U_BOOT_OFFS; + code_len = CONFIG_SYS_MMC_U_BOOT_SIZE; +#else blklen = mmc->read_bl_len; tmp_buf = malloc(blklen); if (!tmp_buf) { @@ -91,6 +95,7 @@ void __noreturn mmc_boot(void) /* * Load U-Boot image from mmc into RAM */ +#endif blk_start = ALIGN(offset, mmc->read_bl_len) / mmc->read_bl_len; blk_cnt = ALIGN(code_len, mmc->read_bl_len) / mmc->read_bl_len; err = mmc->block_dev.block_read(0, blk_start, blk_cnt,