From: Stephen Warren Date: Mon, 16 Feb 2015 19:16:15 +0000 (-0700) Subject: rpi: add support for Raspberry Pi 2 model B X-Git-Tag: v2015.04-rc3~32 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=46414296953410706e917cef9238926084e83a4b;p=u-boot rpi: add support for Raspberry Pi 2 model B USB doesn't seem to work yet; the controller detects the on-board Hub/ Ethernet device but can't read the descriptors from it. I haven't investigated yet. Signed-off-by: Stephen Warren --- diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 083823e8c4..820ba1ccab 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -310,6 +310,10 @@ config TARGET_RPI bool "Support rpi" select CPU_ARM1176 +config TARGET_RPI_2 + bool "Support rpi_2" + select CPU_V7 + config TARGET_TNETV107X_EVM bool "Support tnetv107x_evm" select CPU_ARM1176 @@ -830,6 +834,7 @@ source "board/phytec/pcm051/Kconfig" source "board/ppcag/bg0900/Kconfig" source "board/pxa255_idp/Kconfig" source "board/raspberrypi/rpi/Kconfig" +source "board/raspberrypi/rpi_2/Kconfig" source "board/samsung/smdk2410/Kconfig" source "board/sandisk/sansa_fuze_plus/Kconfig" source "board/scb9328/Kconfig" diff --git a/arch/arm/cpu/arm1176/bcm2835/Kconfig b/arch/arm/cpu/arm1176/bcm2835/Kconfig index 94f57d732f..162f973f6c 100644 --- a/arch/arm/cpu/arm1176/bcm2835/Kconfig +++ b/arch/arm/cpu/arm1176/bcm2835/Kconfig @@ -1,4 +1,4 @@ -if TARGET_RPI +if TARGET_RPI || TARGET_RPI_2 config DM default y if !SPL_BUILD diff --git a/arch/arm/include/asm/arch-bcm2835/mbox.h b/arch/arm/include/asm/arch-bcm2835/mbox.h index c4bbacaf3c..04bf480a54 100644 --- a/arch/arm/include/asm/arch-bcm2835/mbox.h +++ b/arch/arm/include/asm/arch-bcm2835/mbox.h @@ -125,6 +125,9 @@ struct bcm2835_mbox_tag_hdr { #define BCM2835_MBOX_TAG_GET_BOARD_REV 0x00010002 +#ifdef CONFIG_BCM2836 +#define BCM2836_BOARD_REV_2_B 0x4 +#else /* * 0x2..0xf from: * http://raspberryalphaomega.org.uk/2013/02/06/automatic-raspberry-pi-board-revision-detection-model-a-b1-and-b2/ @@ -145,6 +148,7 @@ struct bcm2835_mbox_tag_hdr { #define BCM2835_BOARD_REV_B_PLUS 0x10 #define BCM2835_BOARD_REV_CM 0x11 #define BCM2835_BOARD_REV_A_PLUS 0x12 +#endif struct bcm2835_mbox_tag_get_board_rev { struct bcm2835_mbox_tag_hdr tag_hdr; diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c index fdbf87d6fa..50a699bb9e 100644 --- a/board/raspberrypi/rpi/rpi.c +++ b/board/raspberrypi/rpi/rpi.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2012-2013 Stephen Warren + * (C) Copyright 2012-2013,2015 Stephen Warren * * SPDX-License-Identifier: GPL-2.0 */ @@ -29,7 +29,11 @@ U_BOOT_DEVICE(bcm2835_gpios) = { }; static const struct pl01x_serial_platdata serial_platdata = { +#ifdef CONFIG_BCM2836 + .base = 0x3f201000, +#else .base = 0x20201000, +#endif .type = TYPE_PL011, .clock = 3000000, }; @@ -77,9 +81,20 @@ static const struct { } models[] = { [0] = { "Unknown model", +#ifdef CONFIG_BCM2836 + "bcm2836-rpi-other.dtb", +#else "bcm2835-rpi-other.dtb", +#endif false, }, +#ifdef CONFIG_BCM2836 + [BCM2836_BOARD_REV_2_B] = { + "2 Model B", + "bcm2836-rpi-2-b.dtb", + true, + }, +#else [BCM2835_BOARD_REV_B_I2C0_2] = { "Model B (no P5)", "bcm2835-rpi-b-i2c0.dtb", @@ -150,6 +165,7 @@ static const struct { "bcm2835-rpi-a-plus.dtb", false, }, +#endif }; u32 rpi_board_rev = 0; @@ -257,7 +273,15 @@ static void get_board_rev(void) return; } + /* + * For details of old-vs-new scheme, see: + * https://github.com/pimoroni/RPi.version/blob/master/RPi/version.py + * http://www.raspberrypi.org/forums/viewtopic.php?f=63&t=99293&p=690282 + * (a few posts down) + */ rpi_board_rev = msg->get_board_rev.body.resp.rev; + if (rpi_board_rev & 0x800000) + rpi_board_rev = (rpi_board_rev >> 4) & 0xff; if (rpi_board_rev >= ARRAY_SIZE(models)) { printf("RPI: Board rev %u outside known range\n", rpi_board_rev); @@ -269,7 +293,7 @@ static void get_board_rev(void) } name = models[rpi_board_rev].name; - printf("RPI model: %s\n", name); + printf("RPI %s\n", name); } int board_init(void) diff --git a/board/raspberrypi/rpi_2/Kconfig b/board/raspberrypi/rpi_2/Kconfig new file mode 100644 index 0000000000..032184d5ad --- /dev/null +++ b/board/raspberrypi/rpi_2/Kconfig @@ -0,0 +1,15 @@ +if TARGET_RPI_2 + +config SYS_BOARD + default "rpi_2" + +config SYS_VENDOR + default "raspberrypi" + +config SYS_SOC + default "bcm2835" + +config SYS_CONFIG_NAME + default "rpi_2" + +endif diff --git a/board/raspberrypi/rpi_2/MAINTAINERS b/board/raspberrypi/rpi_2/MAINTAINERS new file mode 100644 index 0000000000..85a480c9d1 --- /dev/null +++ b/board/raspberrypi/rpi_2/MAINTAINERS @@ -0,0 +1,6 @@ +RPI_2 BOARD +M: Stephen Warren +S: Maintained +F: board/raspberrypi/rpi_2/ +F: include/configs/rpi_2.h +F: configs/rpi_2_defconfig diff --git a/board/raspberrypi/rpi_2/Makefile b/board/raspberrypi/rpi_2/Makefile new file mode 100644 index 0000000000..d82cd21f4c --- /dev/null +++ b/board/raspberrypi/rpi_2/Makefile @@ -0,0 +1,7 @@ +# +# (C) Copyright 2012,2015 Stephen Warren +# +# SPDX-License-Identifier: GPL-2.0 +# + +obj-y := ../rpi/rpi.o diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig new file mode 100644 index 0000000000..b539d4a689 --- /dev/null +++ b/configs/rpi_2_defconfig @@ -0,0 +1,4 @@ +CONFIG_ARM=y +CONFIG_TARGET_RPI_2=y +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 diff --git a/include/configs/rpi-common.h b/include/configs/rpi-common.h new file mode 100644 index 0000000000..3121ac9874 --- /dev/null +++ b/include/configs/rpi-common.h @@ -0,0 +1,186 @@ +/* + * (C) Copyright 2012,2015 Stephen Warren + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _RPI_COMMON_H_ +#define _RPI_COMMON_H_ + +#include + +/* Architecture, CPU, etc.*/ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_BCM2835 +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_SYS_DCACHE_OFF +/* + * 2835 is a SKU in a series for which the 2708 is the first or primary SoC, + * so 2708 has historically been used rather than a dedicated 2835 ID. + * + * We don't define a machine type for bcm2709/bcm2836 since the RPi Foundation + * chose to use someone else's previously registered machine ID (3139, MX51_GGC) + * rather than obtaining a valid ID:-/ + */ +#ifndef CONFIG_BCM2836 +#define CONFIG_MACH_TYPE MACH_TYPE_BCM2708 +#endif + +/* Memory layout */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_TEXT_BASE 0x00008000 +#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE +/* + * The board really has 256M. However, the VC (VideoCore co-processor) shares + * the RAM, and uses a configurable portion at the top. We tell U-Boot that a + * smaller amount of RAM is present in order to avoid stomping on the area + * the VC uses. + */ +#define CONFIG_SYS_SDRAM_SIZE SZ_128M +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ + CONFIG_SYS_SDRAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_MALLOC_LEN SZ_4M +#define CONFIG_SYS_MEMTEST_START 0x00100000 +#define CONFIG_SYS_MEMTEST_END 0x00200000 +#define CONFIG_LOADADDR 0x00200000 + +/* Flash */ +#define CONFIG_SYS_NO_FLASH + +/* Devices */ +/* GPIO */ +#define CONFIG_BCM2835_GPIO +/* LCD */ +#define CONFIG_LCD +#define CONFIG_LCD_DT_SIMPLEFB +#define LCD_BPP LCD_COLOR16 +/* + * Prevent allocation of RAM for FB; the real FB address is queried + * dynamically from the VideoCore co-processor, and comes from RAM + * not owned by the ARM CPU. + */ +#define CONFIG_FB_ADDR 0 +#define CONFIG_VIDEO_BCM2835 +#define CONFIG_SYS_WHITE_ON_BLACK + +/* SD/MMC configuration */ +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC +#define CONFIG_SDHCI +#define CONFIG_MMC_SDHCI_IO_ACCESSORS +#define CONFIG_BCM2835_SDHCI + +#define CONFIG_CMD_USB +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_DWC2 +#ifdef CONFIG_BCM2836 +#define CONFIG_USB_DWC2_REG_ADDR 0x3f980000 +#else +#define CONFIG_USB_DWC2_REG_ADDR 0x20980000 +#endif +#define CONFIG_USB_STORAGE +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_SMSC95XX +#define CONFIG_MISC_INIT_R +#endif + +/* Console UART */ +#define CONFIG_PL01X_SERIAL +#define CONFIG_CONS_INDEX 0 +#define CONFIG_BAUDRATE 115200 + +/* Console configuration */ +#define CONFIG_SYS_CBSIZE 1024 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* Environment */ +#define CONFIG_ENV_SIZE SZ_16K +#define CONFIG_ENV_IS_IN_FAT +#define FAT_ENV_INTERFACE "mmc" +#define FAT_ENV_DEVICE_AND_PART "0:1" +#define FAT_ENV_FILE "uboot.env" +#define CONFIG_FAT_WRITE +#define CONFIG_ENV_VARS_UBOOT_CONFIG +#define CONFIG_SYS_LOAD_ADDR 0x1000000 +#define CONFIG_CONSOLE_MUX +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +/* Shell */ +#define CONFIG_SYS_MAXARGS 8 +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_COMMAND_HISTORY + +/* Commands */ +#include +#define CONFIG_CMD_GPIO +#define CONFIG_CMD_MMC +#define CONFIG_PARTITION_UUIDS +#define CONFIG_CMD_PART + +/* Device tree support */ +#define CONFIG_OF_BOARD_SETUP +/* ATAGs support for bootm/bootz */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_CMDLINE_TAG +#define CONFIG_INITRD_TAG + +#include + +/* Some things don't make sense on this HW or yet */ +#undef CONFIG_CMD_FPGA + +/* Environment */ +#define ENV_DEVICE_SETTINGS \ + "stdin=serial,lcd\0" \ + "stdout=serial,lcd\0" \ + "stderr=serial,lcd\0" + +/* + * Memory layout for where various images get loaded by boot scripts: + * + * scriptaddr can be pretty much anywhere that doesn't conflict with something + * else. Put it low in memory to avoid conflicts. + * + * pxefile_addr_r can be pretty much anywhere that doesn't conflict with + * something else. Put it low in memory to avoid conflicts. + * + * kernel_addr_r must be within the first 128M of RAM in order for the + * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will + * decompress itself to 0x8000 after the start of RAM, kernel_addr_r + * should not overlap that area, or the kernel will have to copy itself + * somewhere else before decompression. Similarly, the address of any other + * data passed to the kernel shouldn't overlap the start of RAM. Pushing + * this up to 16M allows for a sizable kernel to be decompressed below the + * compressed load address. + * + * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for + * the compressed kernel to be up to 16M too. + * + * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows + * for the FDT/DTB to be up to 1M, which is hopefully plenty. + */ +#define ENV_MEM_LAYOUT_SETTINGS \ + "scriptaddr=0x00000000\0" \ + "pxefile_addr_r=0x00100000\0" \ + "kernel_addr_r=0x01000000\0" \ + "fdt_addr_r=0x02000000\0" \ + "ramdisk_addr_r=0x02100000\0" \ + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(USB, usb, 0) \ + func(PXE, pxe, na) \ + func(DHCP, dhcp, na) +#include + +#define CONFIG_EXTRA_ENV_SETTINGS \ + ENV_DEVICE_SETTINGS \ + ENV_MEM_LAYOUT_SETTINGS \ + BOOTENV + +#define CONFIG_BOOTDELAY 2 + +#endif diff --git a/include/configs/rpi.h b/include/configs/rpi.h index 9b32149b0e..ab2f4db39f 100644 --- a/include/configs/rpi.h +++ b/include/configs/rpi.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2012 Stephen Warren + * (C) Copyright 2012,2015 Stephen Warren * * SPDX-License-Identifier: GPL-2.0 */ @@ -7,170 +7,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include - -/* Architecture, CPU, etc.*/ -#define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_BCM2835 -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_SYS_DCACHE_OFF -/* - * 2835 is a SKU in a series for which the 2708 is the first or primary SoC, - * so 2708 has historically been used rather than a dedicated 2835 ID. - */ -#define CONFIG_MACH_TYPE MACH_TYPE_BCM2708 - -/* Memory layout */ -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_TEXT_BASE 0x00008000 -#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE -/* - * The board really has 256M. However, the VC (VideoCore co-processor) shares - * the RAM, and uses a configurable portion at the top. We tell U-Boot that a - * smaller amount of RAM is present in order to avoid stomping on the area - * the VC uses. - */ -#define CONFIG_SYS_SDRAM_SIZE SZ_128M -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_SDRAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_MALLOC_LEN SZ_4M -#define CONFIG_SYS_MEMTEST_START 0x00100000 -#define CONFIG_SYS_MEMTEST_END 0x00200000 -#define CONFIG_LOADADDR 0x00200000 - -/* Flash */ -#define CONFIG_SYS_NO_FLASH - -/* Devices */ -/* GPIO */ -#define CONFIG_BCM2835_GPIO -/* LCD */ -#define CONFIG_LCD -#define CONFIG_LCD_DT_SIMPLEFB -#define LCD_BPP LCD_COLOR16 -/* - * Prevent allocation of RAM for FB; the real FB address is queried - * dynamically from the VideoCore co-processor, and comes from RAM - * not owned by the ARM CPU. - */ -#define CONFIG_FB_ADDR 0 -#define CONFIG_VIDEO_BCM2835 -#define CONFIG_SYS_WHITE_ON_BLACK - -/* SD/MMC configuration */ -#define CONFIG_GENERIC_MMC -#define CONFIG_MMC -#define CONFIG_SDHCI -#define CONFIG_MMC_SDHCI_IO_ACCESSORS -#define CONFIG_BCM2835_SDHCI - -#define CONFIG_CMD_USB -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_DWC2 -#define CONFIG_USB_DWC2_REG_ADDR 0x20980000 -#define CONFIG_USB_STORAGE -#define CONFIG_USB_HOST_ETHER -#define CONFIG_USB_ETHER_SMSC95XX -#define CONFIG_MISC_INIT_R -#endif - -/* Console UART */ -#define CONFIG_PL01X_SERIAL -#define CONFIG_CONS_INDEX 0 -#define CONFIG_BAUDRATE 115200 - -/* Console configuration */ -#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - -/* Environment */ -#define CONFIG_ENV_SIZE SZ_16K -#define CONFIG_ENV_IS_IN_FAT -#define FAT_ENV_INTERFACE "mmc" -#define FAT_ENV_DEVICE_AND_PART "0:1" -#define FAT_ENV_FILE "uboot.env" -#define CONFIG_FAT_WRITE -#define CONFIG_ENV_VARS_UBOOT_CONFIG -#define CONFIG_SYS_LOAD_ADDR 0x1000000 -#define CONFIG_CONSOLE_MUX -#define CONFIG_SYS_CONSOLE_IS_IN_ENV - -/* Shell */ -#define CONFIG_SYS_MAXARGS 8 -#define CONFIG_SYS_PROMPT "U-Boot> " -#define CONFIG_COMMAND_HISTORY - -/* Commands */ -#include -#define CONFIG_CMD_GPIO -#define CONFIG_CMD_MMC -#define CONFIG_PARTITION_UUIDS -#define CONFIG_CMD_PART - -/* Device tree support */ -#define CONFIG_OF_BOARD_SETUP -/* ATAGs support for bootm/bootz */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_CMDLINE_TAG -#define CONFIG_INITRD_TAG - -#include - -/* Some things don't make sense on this HW or yet */ -#undef CONFIG_CMD_FPGA - -/* Environment */ -#define ENV_DEVICE_SETTINGS \ - "stdin=serial,lcd\0" \ - "stdout=serial,lcd\0" \ - "stderr=serial,lcd\0" - -/* - * Memory layout for where various images get loaded by boot scripts: - * - * scriptaddr can be pretty much anywhere that doesn't conflict with something - * else. Put it low in memory to avoid conflicts. - * - * pxefile_addr_r can be pretty much anywhere that doesn't conflict with - * something else. Put it low in memory to avoid conflicts. - * - * kernel_addr_r must be within the first 128M of RAM in order for the - * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will - * decompress itself to 0x8000 after the start of RAM, kernel_addr_r - * should not overlap that area, or the kernel will have to copy itself - * somewhere else before decompression. Similarly, the address of any other - * data passed to the kernel shouldn't overlap the start of RAM. Pushing - * this up to 16M allows for a sizable kernel to be decompressed below the - * compressed load address. - * - * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for - * the compressed kernel to be up to 16M too. - * - * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows - * for the FDT/DTB to be up to 1M, which is hopefully plenty. - */ -#define ENV_MEM_LAYOUT_SETTINGS \ - "scriptaddr=0x00000000\0" \ - "pxefile_addr_r=0x00100000\0" \ - "kernel_addr_r=0x01000000\0" \ - "fdt_addr_r=0x02000000\0" \ - "ramdisk_addr_r=0x02100000\0" \ - -#define BOOT_TARGET_DEVICES(func) \ - func(MMC, mmc, 0) \ - func(USB, usb, 0) \ - func(PXE, pxe, na) \ - func(DHCP, dhcp, na) -#include - -#define CONFIG_EXTRA_ENV_SETTINGS \ - ENV_DEVICE_SETTINGS \ - ENV_MEM_LAYOUT_SETTINGS \ - BOOTENV - -#define CONFIG_BOOTDELAY 2 +#include "rpi-common.h" #endif diff --git a/include/configs/rpi_2.h b/include/configs/rpi_2.h new file mode 100644 index 0000000000..2e7e74fd56 --- /dev/null +++ b/include/configs/rpi_2.h @@ -0,0 +1,15 @@ +/* + * (C) Copyright 2012,2015 Stephen Warren + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_BCM2836 + +#include "rpi-common.h" + +#endif