From: Andre Przywara Date: Sat, 27 Jan 2018 00:52:22 +0000 (+0000) Subject: sunxi: Pine64: temporarily remove extra Pine64 non-plus DT X-Git-Tag: v2018.05-rc1~93^2~9 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=47952b8e42c2790150e16d3d4235b3a1ee0ba9bb;p=u-boot sunxi: Pine64: temporarily remove extra Pine64 non-plus DT With the merge of the new u-boot.itb size check now the build for pine64_plus_defconfig breaks, as this file gets too large: ============= u-boot.itb exceeds file size limit: limit: 516096 bytes actual: 521852 bytes excess: 5756 bytes make: *** [u-boot.itb] Error 1 ============= One easily fixable reason is that we actually have two .dtbs in our FIT image, one for the regular Pine64+ board, and one for the non-plus version. The only difference U-Boot cares about is the 100Mbit Ethernet PHY used on the non-plus version, however Ethernet isn't enabled in the non-plus DT anyway. So we could avoid the non-plus special handling, and remove that extra .dtb from the FIT image, which saves a few KBs and brings us back below the limit. The Pine64 would boot with a Pine64+ .dtb, and would fail to enable Ethernet. Given that it didn't work in the first place, this is not a regression. Once we switch to a non-MMC environment, we can bring this back, then with a proper .dtb and hopefully working Ethernet. Signed-off-by: Andre Przywara Signed-off-by: Maxime Ripard --- diff --git a/configs/pine64_plus_defconfig b/configs/pine64_plus_defconfig index 41ccff139d..aef8c7d7a9 100644 --- a/configs/pine64_plus_defconfig +++ b/configs/pine64_plus_defconfig @@ -10,7 +10,6 @@ CONFIG_SPL=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_ISO_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set -CONFIG_OF_LIST="sun50i-a64-pine64 sun50i-a64-pine64-plus" CONFIG_SUN8I_EMAC=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y