From: Uwe Hermann <uwe@hermann-uwe.de>
Date: Thu, 13 Oct 2011 22:21:06 +0000 (+0200)
Subject: Add an interface file for DLP Design DLP-USB1232H.
X-Git-Tag: v0.6.0-rc1~540
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=498662e2e5e89ab7299b2fa54a307c5bfcdcd00e;p=openocd

Add an interface file for DLP Design DLP-USB1232H.

The DLP Design DLP-USB1232H UART/SPI/JTAG module is based on an FTDI FT2232H
chip. Among other things, it can used as JTAG programmer if connected to
the JTAG target properly. I have successfully wired the module to an
Olimex STM32-H103 eval board and flashed a firmware onto that using OpenOCD.

The setup details and schematics are documented at:
http://randomprojects.org/wiki/DLP-USB1232H_and_OpenOCD_based_JTAG_adapter

Change-Id: I5eb9255a61eeece233009bee77d7dc3b5d1afb8b
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reviewed-on: http://openocd.zylin.com/20
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
---

diff --git a/contrib/openocd.udev b/contrib/openocd.udev
index ba951fb7..25cc7189 100644
--- a/contrib/openocd.udev
+++ b/contrib/openocd.udev
@@ -27,6 +27,7 @@ ATTRS{idVendor}=="0fbb", ATTRS{idProduct}=="1000", MODE="664", GROUP="plugdev"
 # TinCanTools Flyswatter
 # OOCD-Link
 # Marvell Sheevaplug (early development versions)
+# DLP Design DLP-USB1232H USB-to-UART/FIFO interface module
 ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6010", MODE="664", GROUP="plugdev"
 
 # Calao Systems USB-A9260-C02
diff --git a/doc/openocd.texi b/doc/openocd.texi
index 960a4c08..37898591 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -372,6 +372,8 @@ Stellaris eval boards, they can be used to debug other target boards.
 @* Axiom AXM-0432 Link @url{http://www.axman.com}
 @item @b{cortino}
 @* Link @url{http://www.hitex.com/index.php?id=cortino}
+@item @b{dlp-usb1232h}
+@* Link @url{http://www.dlpdesign.com/usb/usb1232h.shtml}
 @end itemize
 
 @section USB-JTAG / Altera USB-Blaster compatibles
diff --git a/tcl/interface/dlp-usb1232h.cfg b/tcl/interface/dlp-usb1232h.cfg
new file mode 100644
index 00000000..74324138
--- /dev/null
+++ b/tcl/interface/dlp-usb1232h.cfg
@@ -0,0 +1,14 @@
+#
+# DLP Design DLP-USB1232H USB-to-UART/FIFO interface module
+#
+# http://www.dlpdesign.com/usb/usb1232h.shtml
+#
+# Schematics for OpenOCD usage:
+# http://randomprojects.org/wiki/DLP-USB1232H_and_OpenOCD_based_JTAG_adapter
+#
+
+interface ft2232
+ft2232_device_desc "Dual RS232-HS"
+ft2232_layout usbjtag
+ft2232_vid_pid 0x0403 0x6010
+