From: David Brownell <dbrownell@users.sourceforge.net>
Date: Tue, 15 Dec 2009 22:39:25 +0000 (-0800)
Subject: more tcl/{board,target} cleanup
X-Git-Tag: v0.4.0-rc1~34
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=4a2f4e34336dbb662a308e5a881edbba9f3657ec;p=openocd

more tcl/{board,target} cleanup

Remove more remnants of the old "jtag_device" syntax.

Don't [format "%s.cpu" $_CHIPNAME] ... it's needless complexity.

Remove various non-supported "-variant" target options; they're not
needed often at all.

Flag some of the board files as needing to have and use target files
for the TAP and target declarations.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
---

diff --git a/tcl/board/at91eb40a.cfg b/tcl/board/at91eb40a.cfg
index 62d3c9c3..40f2e123 100644
--- a/tcl/board/at91eb40a.cfg
+++ b/tcl/board/at91eb40a.cfg
@@ -1,5 +1,9 @@
 #Script for AT91EB40a
 
+# FIXME use some standard target config, maybe create one from this
+#
+#	source [find target/...cfg]
+
 if { [info exists CHIPNAME] } {
    set  _CHIPNAME $CHIPNAME
 } else {
@@ -30,12 +34,11 @@ if { [info exists CPUTAPID ] } {
 reset_config srst_only srst_pulls_trst
 
 #jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
 #target configuration
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME
 
 # speed up memory downloads
 arm7_9 fast_memory_access enable
diff --git a/tcl/board/at91sam9g20-ek.cfg b/tcl/board/at91sam9g20-ek.cfg
index 6e8a1934..b0fe5462 100644
--- a/tcl/board/at91sam9g20-ek.cfg
+++ b/tcl/board/at91sam9g20-ek.cfg
@@ -5,6 +5,10 @@
 #												#
 #################################################################################################
 
+# FIXME use some standard target config, maybe create one from this
+#
+#	source [find target/...cfg]
+
 # Define basic characteristics for the CPU.  The AT91SAM9G20 processor is a subtle variant of
 # the AT91SAM9260 and shares the same tap ID as it.
 
@@ -34,8 +38,8 @@ jtag_ntrst_delay 200
 
 jtag_rclk 5
 
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME
 
 # Establish internal SRAM memory work areas that are important to pre-bootstrap loaders, etc.  The
 # AT91SAM9G20 has two SRAM areas, one starting at 0x00200000 and the other starting at 0x00300000.
diff --git a/tcl/board/digi_connectcore_wi-9c.cfg b/tcl/board/digi_connectcore_wi-9c.cfg
index 3bc26adf..2d823766 100644
--- a/tcl/board/digi_connectcore_wi-9c.cfg
+++ b/tcl/board/digi_connectcore_wi-9c.cfg
@@ -4,6 +4,10 @@
 
 reset_config trst_and_srst
 
+# FIXME use some standard target config, maybe create one from this
+#
+#	source [find target/...cfg]
+
 if { [info exists CHIPNAME] } {
    set  _CHIPNAME $CHIPNAME
 } else {
@@ -29,7 +33,7 @@ if { [info exists CPUTAPID ] } {
    set _CPUTAPID 0x07926031
 }
 
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
 jtag_nsrst_delay 200
@@ -40,7 +44,7 @@ jtag_ntrst_delay 0
 # Target configuration
 ######################
 
-target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
+target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME
 
 $_TARGETNAME configure -event reset-init {
 	mww 0x90600104 0x33313333
diff --git a/tcl/board/hitex_str9-comstick.cfg b/tcl/board/hitex_str9-comstick.cfg
index 968d80ec..af7527a1 100644
--- a/tcl/board/hitex_str9-comstick.cfg
+++ b/tcl/board/hitex_str9-comstick.cfg
@@ -11,8 +11,13 @@ jtag_nsrst_delay 100
 jtag_ntrst_delay 100
 #use combined on interfaces or targets that can't set TRST/SRST separately
 reset_config trst_and_srst
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+
+#
+# FIXME use the standard str912 target config; that script might need
+# updating to "-ignore-version" for the boundary scan TAP
+#
+#	source [find target/str912.cfg]
+#
 
 if { [info exists CHIPNAME] } {
    set  _CHIPNAME $CHIPNAME
@@ -50,8 +55,8 @@ if { [info exists BSTAPID ] } {
 }
 jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID1 -expected-id $_BSTAPID2
 
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME
 
 $_TARGETNAME configure -event reset-init {
 	# We can increase speed now that we know the target is halted.
diff --git a/tcl/board/mini2440.cfg b/tcl/board/mini2440.cfg
index 0f7ebf8a..47bebc43 100644
--- a/tcl/board/mini2440.cfg
+++ b/tcl/board/mini2440.cfg
@@ -71,6 +71,11 @@
 #
 #
 #
+
+# FIXME use some standard target config, maybe create one from this
+#
+#	source [find target/...cfg]
+
 #-------------------------------------------------------------------------
 # Target configuration for the Samsung 2440 system on chip
 # Tested on a S3C2440 Evaluation board by keesj
@@ -102,8 +107,8 @@ if { [info exists CPUTAPID ] } {
 #jtag scan chain
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID
 
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm920t
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME
 $_TARGETNAME configure -work-area-phys 0x40000000  -work-area-size 0x4000 -work-area-backup 1
 
 #reset configuration
diff --git a/tcl/board/str910-eval.cfg b/tcl/board/str910-eval.cfg
index 0cf794ae..a2772a84 100644
--- a/tcl/board/str910-eval.cfg
+++ b/tcl/board/str910-eval.cfg
@@ -3,6 +3,10 @@
 # Need reset scripts
 reset_config trst_and_srst
 
+# FIXME use some standard target config, maybe create one from this
+#
+#	source [find target/...cfg]
+
 if { [info exists CHIPNAME] } {
    set  _CHIPNAME $CHIPNAME
 } else {
@@ -37,8 +41,8 @@ if { [info exists BSTAPID ] } {
 }
 jtag newtap $_CHIPNAME bs    -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID
 
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME
 $_TARGETNAME configure -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 1
 
 $_TARGETNAME configure -event reset-init {
diff --git a/tcl/board/zy1000.cfg b/tcl/board/zy1000.cfg
index 3f526d06..8278fa46 100644
--- a/tcl/board/zy1000.cfg
+++ b/tcl/board/zy1000.cfg
@@ -31,8 +31,8 @@ if { [info exists CPUTAPID ] } {
 }
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME
 
 # at CPU CLK <32kHz this must be disabled
 arm7_9 fast_memory_access enable
diff --git a/tcl/target/ar71xx.cfg b/tcl/target/ar71xx.cfg
index 47bab1e3..20383315 100644
--- a/tcl/target/ar71xx.cfg
+++ b/tcl/target/ar71xx.cfg
@@ -10,7 +10,7 @@ set CHIPNAME ar71xx
 
 jtag newtap $CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id 1
 
-set TARGETNAME [format "%s.cpu" $CHIPNAME]
+set TARGETNAME $CHIPNAME.cpu
 target create $TARGETNAME mips_m4k -endian big -chain-position $TARGETNAME
 
 $TARGETNAME configure -event reset-halt-post {
diff --git a/tcl/target/c100.cfg b/tcl/target/c100.cfg
index a0a28d80..b175f23f 100644
--- a/tcl/target/c100.cfg
+++ b/tcl/target/c100.cfg
@@ -35,7 +35,7 @@ jtag newtap $_CHIPNAME dsp -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_D
 # Per ARM: DDI0211J_arm1136_r1p5_trm.pdf - the ARM 1136 as a 5 bit IR register
 jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_CPUTAPID
 
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME arm11 -endian $_ENDIAN -chain-position $_TARGETNAME
 
 # C100's ARAM 64k SRAM
diff --git a/tcl/target/lpc2900.cfg b/tcl/target/lpc2900.cfg
index 2371dd7a..769d39d4 100644
--- a/tcl/target/lpc2900.cfg
+++ b/tcl/target/lpc2900.cfg
@@ -29,7 +29,7 @@ if { [info exists ETBTAPID ] } {
 reset_config trst_and_srst separate
 
 # Define the _TARGETNAME
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
 
 # Include the ETB tap controller if asked for.
 # Has to be done manually for newer devices (not an "old" LPC2917/2919).
diff --git a/tcl/target/tmpa900.cfg b/tcl/target/tmpa900.cfg
index 80adc652..329e03ca 100644
--- a/tcl/target/tmpa900.cfg
+++ b/tcl/target/tmpa900.cfg
@@ -39,8 +39,8 @@ jtag_ntrst_delay 20
 # Target configuration
 ######################
 
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME
 
 # built-in RAM0
 #working_area 0 0xf8004000 0x4000 nobackup
diff --git a/tcl/target/tmpa910.cfg b/tcl/target/tmpa910.cfg
index 4af5e4e8..29d2d6ef 100644
--- a/tcl/target/tmpa910.cfg
+++ b/tcl/target/tmpa910.cfg
@@ -39,8 +39,8 @@ jtag_ntrst_delay 20
 # Target configuration
 ######################
 
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME
 
 # built-in RAM0
 #working_area 0 0xf8004000 0x4000 nobackup