From: Saksham Jain <saksham.jain@nxp.com>
Date: Wed, 23 Mar 2016 10:54:40 +0000 (+0530)
Subject: armv8: fsl-lsch3: Disable SMMU during secure boot
X-Git-Tag: v2016.05-rc1~120^2~9
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=4a97a0c91d25763d7c3af5530c5e89f53fee7643;p=u-boot

armv8: fsl-lsch3: Disable SMMU during secure boot

During secure boot, SMMU is enabled on POR by SP bootrom. SMMU needs
to be put in bypass mode in uboot to enable CAAM transcations to pass
through.

For non-secure boot, SP BootROM doesn't enable SMMU, which is in
bypass mode out of reset.

Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com>
Signed-off-by: Saksham Jain <saksham.jain@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
---

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index bf0474283f..a76447ec27 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -151,7 +151,14 @@ static void erratum_a009203(void)
 #endif
 #endif
 }
-
+void bypass_smmu(void)
+{
+	u32 val;
+	val = (in_le32(SMMU_SCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
+	out_le32(SMMU_SCR0, val);
+	val = (in_le32(SMMU_NSCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
+	out_le32(SMMU_NSCR0, val);
+}
 void fsl_lsch3_early_init_f(void)
 {
 	erratum_a008751();
@@ -160,6 +167,15 @@ void fsl_lsch3_early_init_f(void)
 	erratum_a009203();
 	erratum_a008514();
 	erratum_a008336();
+#ifdef CONFIG_CHAIN_OF_TRUST
+	/* In case of Secure Boot, the IBR configures the SMMU
+	* to allow only Secure transactions.
+	* SMMU must be reset in bypass mode.
+	* Set the ClientPD bit and Clear the USFCFG Bit
+	*/
+	if (fsl_check_boot_mode_secure() == 1)
+		bypass_smmu();
+#endif
 }
 
 #ifdef CONFIG_SCSI_AHCI_PLAT
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index e8e3b91d3d..4f0fdfd4b1 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -83,6 +83,21 @@
 /* Security Monitor */
 #define CONFIG_SYS_SEC_MON_ADDR		(CONFIG_SYS_IMMR + 0x00e90000)
 
+/* MMU 500 */
+#define SMMU_SCR0			(SMMU_BASE + 0x0)
+#define SMMU_SCR1			(SMMU_BASE + 0x4)
+#define SMMU_SCR2			(SMMU_BASE + 0x8)
+#define SMMU_SACR			(SMMU_BASE + 0x10)
+#define SMMU_IDR0			(SMMU_BASE + 0x20)
+#define SMMU_IDR1			(SMMU_BASE + 0x24)
+
+#define SMMU_NSCR0			(SMMU_BASE + 0x400)
+#define SMMU_NSCR2			(SMMU_BASE + 0x408)
+#define SMMU_NSACR			(SMMU_BASE + 0x410)
+
+#define SCR0_CLIENTPD_MASK		0x00000001
+#define SCR0_USFCFG_MASK		0x00000400
+
 
 /* PCIe */
 #define CONFIG_SYS_PCIE1_ADDR			(CONFIG_SYS_IMMR + 0x2400000)