From: Patrice Chotard Date: Wed, 13 Sep 2017 16:00:06 +0000 (+0200) Subject: dm: clk: add clk driver support for stm32h7 SoCs X-Git-Tag: v2017.11-rc1~57 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=4c3aebd56a035740f04fce44ce6c398afbb5ad86;p=u-boot dm: clk: add clk driver support for stm32h7 SoCs This driver implements basic clock setup, only clock gating is implemented. This driver doesn't implement .of_match as it's binded by MFD RCC driver. Files include/dt-bindings/clock/stm32h7-clks.h and doc/device-tree-bindings/clock/st,stm32h7-rcc.txt will be available soon in a kernel tag, as all the bindings have been acked by Rob Herring [1]. [1] http://lkml.iu.edu/hypermail/linux/kernel/1704.0/00935.html Signed-off-by: Patrice Chotard Reviewed-by: Simon Glass --- diff --git a/doc/device-tree-bindings/clock/st,stm32h7-rcc.txt b/doc/device-tree-bindings/clock/st,stm32h7-rcc.txt new file mode 100644 index 0000000000..9d4b5873d9 --- /dev/null +++ b/doc/device-tree-bindings/clock/st,stm32h7-rcc.txt @@ -0,0 +1,152 @@ +STMicroelectronics STM32H7 Reset and Clock Controller +===================================================== + +The RCC IP is both a reset and a clock controller. + +Please refer to clock-bindings.txt for common clock controller binding usage. +Please also refer to reset.txt for common reset controller binding usage. + +Required properties: +- compatible: Should be: + "st,stm32h743-rcc" + +- reg: should be register base and length as documented in the + datasheet + +- #reset-cells: 1, see below + +- #clock-cells : from common clock binding; shall be set to 1 + +- clocks: External oscillator clock phandle + - high speed external clock signal (HSE) + - low speed external clock signal (LSE) + - external I2S clock (I2S_CKIN) + +- st,syscfg: phandle for pwrcfg, mandatory to disable/enable backup domain + write protection (RTC clock). + +- pll x node: Allow to register a pll with specific parameters. + Please see PLL section below. + +Example: + + rcc: rcc@58024400 { + #reset-cells = <1>; + #clock-cells = <2> + compatible = "st,stm32h743-rcc", "st,stm32-rcc"; + reg = <0x58024400 0x400>; + clocks = <&clk_hse>, <&clk_lse>, <&clk_i2s_ckin>; + + st,syscfg = <&pwrcfg>; + + #address-cells = <1>; + #size-cells = <0>; + + vco1@58024430 { + #clock-cells = <0>; + compatible = "stm32,pll"; + reg = <0>; + }; + + vco2@58024438 { + #clock-cells = <0>; + compatible = "stm32,pll"; + reg = <1>; + st,clock-div = <2>; + st,clock-mult = <40>; + st,frac-status = <0>; + st,frac = <0>; + st,vcosel = <1>; + st,pllrge = <2>; + }; + }; + + +STM32H7 PLL +----------- + +The VCO of STM32 PLL could be reprensented like this: + + Vref --------- -------- + ---->| / DIVM |---->| x DIVN | ------> VCO + --------- -------- + ^ + | + ------- + | FRACN | + ------- + +When the PLL is configured in integer mode: +- VCO = ( Vref / DIVM ) * DIVN + +When the PLL is configured in fractional mode: +- VCO = ( Vref / DIVM ) * ( DIVN + FRACN / 2^13) + + +Required properties for pll node: +- compatible: Should be: + "stm32,pll" + +- #clock-cells: from common clock binding; shall be set to 0 +- reg: Should be the pll number. + +Optional properties: +- st,clock-div: DIVM division factor : <1..63> +- st,clock-mult: DIVN multiplication factor : <4..512> + +- st,frac-status: + - 0 Pll is configured in integer mode + - 1 Pll is configure in fractional mode + +- st,frac: Fractional part of the multiplication factor : <0..8191> + +- st,vcosel: VCO selection + - 0: Wide VCO range:192 to 836 MHz + - 1: Medium VCO range:150 to 420 MHz + +- st,pllrge: PLL input frequency range + - 0: The PLL input (Vref / DIVM) clock range frequency is between 1 and 2 MHz + - 1: The PLL input (Vref / DIVM) clock range frequency is between 2 and 4 MHz + - 2: The PLL input (Vref / DIVM) clock range frequency is between 4 and 8 MHz + - 3: The PLL input (Vref / DIVM) clock range frequency is between 8 and 16 MHz + + +The peripheral clock consumer should specify the desired clock by +having the clock ID in its "clocks" phandle cell. + +All available clocks are defined as preprocessor macros in +dt-bindings/clock/stm32h7-clks.h header and can be used in device +tree sources. + +Example: + + timer5: timer@40000c00 { + compatible = "st,stm32-timer"; + reg = <0x40000c00 0x400>; + interrupts = <50>; + clocks = <&rcc TIM5_CK>; + + }; + +Specifying softreset control of devices +======================================= + +Device nodes should specify the reset channel required in their "resets" +property, containing a phandle to the reset device node and an index specifying +which channel to use. +The index is the bit number within the RCC registers bank, starting from RCC +base address. +It is calculated as: index = register_offset / 4 * 32 + bit_offset. +Where bit_offset is the bit offset within the register. + +For example, for CRC reset: + crc = AHB4RSTR_offset / 4 * 32 + CRCRST_bit_offset = 0x88 / 4 * 32 + 19 = 1107 + +All available preprocessor macros for reset are defined dt-bindings//mfd/stm32h7-rcc.h +header and can be used in device tree sources. + +example: + + timer2 { + resets = <&rcc STM32H7_APB1L_RESET(TIM2)>; + }; diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index b7735933be..83fe88ce9f 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -22,3 +22,4 @@ obj-$(CONFIG_CLK_BCM6345) += clk_bcm6345.o obj-$(CONFIG_CLK_BOSTON) += clk_boston.o obj-$(CONFIG_ARCH_ASPEED) += aspeed/ obj-$(CONFIG_STM32F7) += clk_stm32f7.o +obj-$(CONFIG_STM32H7) += clk_stm32h7.o diff --git a/drivers/clk/clk_stm32h7.c b/drivers/clk/clk_stm32h7.c new file mode 100644 index 0000000000..fd0e3ab100 --- /dev/null +++ b/drivers/clk/clk_stm32h7.c @@ -0,0 +1,802 @@ +/* + * Copyright (C) STMicroelectronics SA 2017 + * Author(s): Patrice CHOTARD, for STMicroelectronics. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +DECLARE_GLOBAL_DATA_PTR; + +/* RCC CR specific definitions */ +#define RCC_CR_HSION BIT(0) +#define RCC_CR_HSIRDY BIT(2) + +#define RCC_CR_HSEON BIT(16) +#define RCC_CR_HSERDY BIT(17) +#define RCC_CR_HSEBYP BIT(18) +#define RCC_CR_PLL1ON BIT(24) +#define RCC_CR_PLL1RDY BIT(25) + +#define RCC_CR_HSIDIV_MASK GENMASK(4, 3) +#define RCC_CR_HSIDIV_SHIFT 3 + +#define RCC_CFGR_SW_MASK GENMASK(2, 0) +#define RCC_CFGR_SW_HSI 0 +#define RCC_CFGR_SW_CSI 1 +#define RCC_CFGR_SW_HSE 2 +#define RCC_CFGR_SW_PLL1 3 + +#define RCC_PLLCKSELR_PLLSRC_HSI 0 +#define RCC_PLLCKSELR_PLLSRC_CSI 1 +#define RCC_PLLCKSELR_PLLSRC_HSE 2 +#define RCC_PLLCKSELR_PLLSRC_NO_CLK 3 + +#define RCC_PLLCKSELR_PLLSRC_MASK GENMASK(1, 0) + +#define RCC_PLLCKSELR_DIVM1_SHIFT 4 +#define RCC_PLLCKSELR_DIVM1_MASK GENMASK(9, 4) + +#define RCC_PLL1DIVR_DIVN1_MASK GENMASK(8, 0) + +#define RCC_PLL1DIVR_DIVP1_SHIFT 9 +#define RCC_PLL1DIVR_DIVP1_MASK GENMASK(15, 9) + +#define RCC_PLL1DIVR_DIVQ1_SHIFT 16 +#define RCC_PLL1DIVR_DIVQ1_MASK GENMASK(22, 16) + +#define RCC_PLL1DIVR_DIVR1_SHIFT 24 +#define RCC_PLL1DIVR_DIVR1_MASK GENMASK(30, 24) + +#define RCC_PLL1FRACR_FRACN1_SHIFT 3 +#define RCC_PLL1FRACR_FRACN1_MASK GENMASK(15, 3) + +#define RCC_PLLCFGR_PLL1RGE_SHIFT 2 +#define PLL1RGE_1_2_MHZ 0 +#define PLL1RGE_2_4_MHZ 1 +#define PLL1RGE_4_8_MHZ 2 +#define PLL1RGE_8_16_MHZ 3 +#define RCC_PLLCFGR_DIVP1EN BIT(16) +#define RCC_PLLCFGR_DIVQ1EN BIT(17) +#define RCC_PLLCFGR_DIVR1EN BIT(18) + +#define RCC_D1CFGR_HPRE_MASK GENMASK(3, 0) +#define RCC_D1CFGR_HPRE_DIVIDED BIT(3) +#define RCC_D1CFGR_HPRE_DIVIDER GENMASK(2, 0) + +#define RCC_D1CFGR_HPRE_DIV2 8 + +#define RCC_D1CFGR_D1PPRE_SHIFT 4 +#define RCC_D1CFGR_D1PPRE_DIVIDED BIT(6) +#define RCC_D1CFGR_D1PPRE_DIVIDER GENMASK(5, 4) + +#define RCC_D1CFGR_D1CPRE_SHIFT 8 +#define RCC_D1CFGR_D1CPRE_DIVIDER GENMASK(10, 8) +#define RCC_D1CFGR_D1CPRE_DIVIDED BIT(11) + +#define RCC_D2CFGR_D2PPRE1_SHIFT 4 +#define RCC_D2CFGR_D2PPRE1_DIVIDED BIT(6) +#define RCC_D2CFGR_D2PPRE1_DIVIDER GENMASK(5, 4) + +#define RCC_D2CFGR_D2PPRE2_SHIFT 8 +#define RCC_D2CFGR_D2PPRE2_DIVIDED BIT(10) +#define RCC_D2CFGR_D2PPRE2_DIVIDER GENMASK(9, 8) + +#define RCC_D3CFGR_D3PPRE_SHIFT 4 +#define RCC_D3CFGR_D3PPRE_DIVIDED BIT(6) +#define RCC_D3CFGR_D3PPRE_DIVIDER GENMASK(5, 4) + +#define RCC_D1CCIPR_FMCSRC_MASK GENMASK(1, 0) +#define FMCSRC_HCLKD1 0 +#define FMCSRC_PLL1_Q_CK 1 +#define FMCSRC_PLL2_R_CK 2 +#define FMCSRC_PER_CK 3 + +#define RCC_D1CCIPR_QSPISRC_MASK GENMASK(5, 4) +#define RCC_D1CCIPR_QSPISRC_SHIFT 4 +#define QSPISRC_HCLKD1 0 +#define QSPISRC_PLL1_Q_CK 1 +#define QSPISRC_PLL2_R_CK 2 +#define QSPISRC_PER_CK 3 + +#define PWR_CR3 0x0c +#define PWR_CR3_SDEN BIT(2) +#define PWR_D3CR 0x18 +#define PWR_D3CR_VOS_MASK GENMASK(15, 14) +#define PWR_D3CR_VOS_SHIFT 14 +#define VOS_SCALE_3 1 +#define VOS_SCALE_2 2 +#define VOS_SCALE_1 3 +#define PWR_D3CR_VOSREADY BIT(13) + +struct stm32_rcc_regs { + u32 cr; /* 0x00 Source Control Register */ + u32 icscr; /* 0x04 Internal Clock Source Calibration Register */ + u32 crrcr; /* 0x08 Clock Recovery RC Register */ + u32 reserved1; /* 0x0c reserved */ + u32 cfgr; /* 0x10 Clock Configuration Register */ + u32 reserved2; /* 0x14 reserved */ + u32 d1cfgr; /* 0x18 Domain 1 Clock Configuration Register */ + u32 d2cfgr; /* 0x1c Domain 2 Clock Configuration Register */ + u32 d3cfgr; /* 0x20 Domain 3 Clock Configuration Register */ + u32 reserved3; /* 0x24 reserved */ + u32 pllckselr; /* 0x28 PLLs Clock Source Selection Register */ + u32 pllcfgr; /* 0x2c PLLs Configuration Register */ + u32 pll1divr; /* 0x30 PLL1 Dividers Configuration Register */ + u32 pll1fracr; /* 0x34 PLL1 Fractional Divider Register */ + u32 pll2divr; /* 0x38 PLL2 Dividers Configuration Register */ + u32 pll2fracr; /* 0x3c PLL2 Fractional Divider Register */ + u32 pll3divr; /* 0x40 PLL3 Dividers Configuration Register */ + u32 pll3fracr; /* 0x44 PLL3 Fractional Divider Register */ + u32 reserved4; /* 0x48 reserved */ + u32 d1ccipr; /* 0x4c Domain 1 Kernel Clock Configuration Register */ + u32 d2ccip1r; /* 0x50 Domain 2 Kernel Clock Configuration Register */ + u32 d2ccip2r; /* 0x54 Domain 2 Kernel Clock Configuration Register */ + u32 d3ccipr; /* 0x58 Domain 3 Kernel Clock Configuration Register */ + u32 reserved5; /* 0x5c reserved */ + u32 cier; /* 0x60 Clock Source Interrupt Enable Register */ + u32 cifr; /* 0x64 Clock Source Interrupt Flag Register */ + u32 cicr; /* 0x68 Clock Source Interrupt Clear Register */ + u32 reserved6; /* 0x6c reserved */ + u32 bdcr; /* 0x70 Backup Domain Control Register */ + u32 csr; /* 0x74 Clock Control and Status Register */ + u32 reserved7; /* 0x78 reserved */ + + u32 ahb3rstr; /* 0x7c AHB3 Peripheral Reset Register */ + u32 ahb1rstr; /* 0x80 AHB1 Peripheral Reset Register */ + u32 ahb2rstr; /* 0x84 AHB2 Peripheral Reset Register */ + u32 ahb4rstr; /* 0x88 AHB4 Peripheral Reset Register */ + + u32 apb3rstr; /* 0x8c APB3 Peripheral Reset Register */ + u32 apb1lrstr; /* 0x90 APB1 low Peripheral Reset Register */ + u32 apb1hrstr; /* 0x94 APB1 high Peripheral Reset Register */ + u32 apb2rstr; /* 0x98 APB2 Clock Register */ + u32 apb4rstr; /* 0x9c APB4 Clock Register */ + + u32 gcr; /* 0xa0 Global Control Register */ + u32 reserved8; /* 0xa4 reserved */ + u32 d3amr; /* 0xa8 D3 Autonomous mode Register */ + u32 reserved9[9];/* 0xac to 0xcc reserved */ + u32 rsr; /* 0xd0 Reset Status Register */ + u32 ahb3enr; /* 0xd4 AHB3 Clock Register */ + u32 ahb1enr; /* 0xd8 AHB1 Clock Register */ + u32 ahb2enr; /* 0xdc AHB2 Clock Register */ + u32 ahb4enr; /* 0xe0 AHB4 Clock Register */ + + u32 apb3enr; /* 0xe4 APB3 Clock Register */ + u32 apb1lenr; /* 0xe8 APB1 low Clock Register */ + u32 apb1henr; /* 0xec APB1 high Clock Register */ + u32 apb2enr; /* 0xf0 APB2 Clock Register */ + u32 apb4enr; /* 0xf4 APB4 Clock Register */ +}; + +#define RCC_AHB3ENR offsetof(struct stm32_rcc_regs, ahb3enr) +#define RCC_AHB1ENR offsetof(struct stm32_rcc_regs, ahb1enr) +#define RCC_AHB2ENR offsetof(struct stm32_rcc_regs, ahb2enr) +#define RCC_AHB4ENR offsetof(struct stm32_rcc_regs, ahb4enr) +#define RCC_APB3ENR offsetof(struct stm32_rcc_regs, apb3enr) +#define RCC_APB1LENR offsetof(struct stm32_rcc_regs, apb1lenr) +#define RCC_APB1HENR offsetof(struct stm32_rcc_regs, apb1henr) +#define RCC_APB2ENR offsetof(struct stm32_rcc_regs, apb2enr) +#define RCC_APB4ENR offsetof(struct stm32_rcc_regs, apb4enr) + +struct clk_cfg { + u32 gate_offset; + u8 gate_bit_idx; + const char *name; +}; + +#define CLK(_gate_offset, _bit_idx, _name) \ +{ \ + .gate_offset = _gate_offset,\ + .gate_bit_idx = _bit_idx,\ + .name = _name,\ +} + +/* + * the way all these entries are sorted in this array could seem + * unlogical, but we are dependant of kernel DT_bindings, + * where clocks are separate in 2 banks, peripheral clocks and + * kernel clocks. + */ + +static const struct clk_cfg clk_map[] = { + CLK(RCC_AHB3ENR, 31, "d1sram1"), /* peripheral clocks */ + CLK(RCC_AHB3ENR, 30, "itcm"), + CLK(RCC_AHB3ENR, 29, "dtcm2"), + CLK(RCC_AHB3ENR, 28, "dtcm1"), + CLK(RCC_AHB3ENR, 8, "flitf"), + CLK(RCC_AHB3ENR, 5, "jpgdec"), + CLK(RCC_AHB3ENR, 4, "dma2d"), + CLK(RCC_AHB3ENR, 0, "mdma"), + CLK(RCC_AHB1ENR, 28, "usb2ulpi"), + CLK(RCC_AHB1ENR, 17, "eth1rx"), + CLK(RCC_AHB1ENR, 16, "eth1tx"), + CLK(RCC_AHB1ENR, 15, "eth1mac"), + CLK(RCC_AHB1ENR, 14, "art"), + CLK(RCC_AHB1ENR, 26, "usb1ulpi"), + CLK(RCC_AHB1ENR, 1, "dma2"), + CLK(RCC_AHB1ENR, 0, "dma1"), + CLK(RCC_AHB2ENR, 31, "d2sram3"), + CLK(RCC_AHB2ENR, 30, "d2sram2"), + CLK(RCC_AHB2ENR, 29, "d2sram1"), + CLK(RCC_AHB2ENR, 5, "hash"), + CLK(RCC_AHB2ENR, 4, "crypt"), + CLK(RCC_AHB2ENR, 0, "camitf"), + CLK(RCC_AHB4ENR, 28, "bkpram"), + CLK(RCC_AHB4ENR, 25, "hsem"), + CLK(RCC_AHB4ENR, 21, "bdma"), + CLK(RCC_AHB4ENR, 19, "crc"), + CLK(RCC_AHB4ENR, 10, "gpiok"), + CLK(RCC_AHB4ENR, 9, "gpioj"), + CLK(RCC_AHB4ENR, 8, "gpioi"), + CLK(RCC_AHB4ENR, 7, "gpioh"), + CLK(RCC_AHB4ENR, 6, "gpiog"), + CLK(RCC_AHB4ENR, 5, "gpiof"), + CLK(RCC_AHB4ENR, 4, "gpioe"), + CLK(RCC_AHB4ENR, 3, "gpiod"), + CLK(RCC_AHB4ENR, 2, "gpioc"), + CLK(RCC_AHB4ENR, 1, "gpiob"), + CLK(RCC_AHB4ENR, 0, "gpioa"), + CLK(RCC_APB3ENR, 6, "wwdg1"), + CLK(RCC_APB1LENR, 29, "dac12"), + CLK(RCC_APB1LENR, 11, "wwdg2"), + CLK(RCC_APB1LENR, 8, "tim14"), + CLK(RCC_APB1LENR, 7, "tim13"), + CLK(RCC_APB1LENR, 6, "tim12"), + CLK(RCC_APB1LENR, 5, "tim7"), + CLK(RCC_APB1LENR, 4, "tim6"), + CLK(RCC_APB1LENR, 3, "tim5"), + CLK(RCC_APB1LENR, 2, "tim4"), + CLK(RCC_APB1LENR, 1, "tim3"), + CLK(RCC_APB1LENR, 0, "tim2"), + CLK(RCC_APB1HENR, 5, "mdios"), + CLK(RCC_APB1HENR, 4, "opamp"), + CLK(RCC_APB1HENR, 1, "crs"), + CLK(RCC_APB2ENR, 18, "tim17"), + CLK(RCC_APB2ENR, 17, "tim16"), + CLK(RCC_APB2ENR, 16, "tim15"), + CLK(RCC_APB2ENR, 1, "tim8"), + CLK(RCC_APB2ENR, 0, "tim1"), + CLK(RCC_APB4ENR, 26, "tmpsens"), + CLK(RCC_APB4ENR, 16, "rtcapb"), + CLK(RCC_APB4ENR, 15, "vref"), + CLK(RCC_APB4ENR, 14, "comp12"), + CLK(RCC_APB4ENR, 1, "syscfg"), + CLK(RCC_AHB3ENR, 16, "sdmmc1"), /* kernel clocks */ + CLK(RCC_AHB3ENR, 14, "quadspi"), + CLK(RCC_AHB3ENR, 12, "fmc"), + CLK(RCC_AHB1ENR, 27, "usb2otg"), + CLK(RCC_AHB1ENR, 25, "usb1otg"), + CLK(RCC_AHB1ENR, 5, "adc12"), + CLK(RCC_AHB2ENR, 9, "sdmmc2"), + CLK(RCC_AHB2ENR, 6, "rng"), + CLK(RCC_AHB4ENR, 24, "adc3"), + CLK(RCC_APB3ENR, 4, "dsi"), + CLK(RCC_APB3ENR, 3, "ltdc"), + CLK(RCC_APB1LENR, 31, "usart8"), + CLK(RCC_APB1LENR, 30, "usart7"), + CLK(RCC_APB1LENR, 27, "hdmicec"), + CLK(RCC_APB1LENR, 23, "i2c3"), + CLK(RCC_APB1LENR, 22, "i2c2"), + CLK(RCC_APB1LENR, 21, "i2c1"), + CLK(RCC_APB1LENR, 20, "uart5"), + CLK(RCC_APB1LENR, 19, "uart4"), + CLK(RCC_APB1LENR, 18, "usart3"), + CLK(RCC_APB1LENR, 17, "usart2"), + CLK(RCC_APB1LENR, 16, "spdifrx"), + CLK(RCC_APB1LENR, 15, "spi3"), + CLK(RCC_APB1LENR, 14, "spi2"), + CLK(RCC_APB1LENR, 9, "lptim1"), + CLK(RCC_APB1HENR, 8, "fdcan"), + CLK(RCC_APB1HENR, 2, "swp"), + CLK(RCC_APB2ENR, 29, "hrtim"), + CLK(RCC_APB2ENR, 28, "dfsdm1"), + CLK(RCC_APB2ENR, 24, "sai3"), + CLK(RCC_APB2ENR, 23, "sai2"), + CLK(RCC_APB2ENR, 22, "sai1"), + CLK(RCC_APB2ENR, 20, "spi5"), + CLK(RCC_APB2ENR, 13, "spi4"), + CLK(RCC_APB2ENR, 12, "spi1"), + CLK(RCC_APB2ENR, 5, "usart6"), + CLK(RCC_APB2ENR, 4, "usart1"), + CLK(RCC_APB4ENR, 21, "sai4a"), + CLK(RCC_APB4ENR, 21, "sai4b"), + CLK(RCC_APB4ENR, 12, "lptim5"), + CLK(RCC_APB4ENR, 11, "lptim4"), + CLK(RCC_APB4ENR, 10, "lptim3"), + CLK(RCC_APB4ENR, 9, "lptim2"), + CLK(RCC_APB4ENR, 7, "i2c4"), + CLK(RCC_APB4ENR, 5, "spi6"), + CLK(RCC_APB4ENR, 3, "lpuart1"), +}; + +struct stm32_clk { + struct stm32_rcc_regs *rcc_base; + struct regmap *pwr_regmap; +}; + +struct pll_psc { + u8 divm; + u16 divn; + u8 divp; + u8 divq; + u8 divr; +}; + +/* + * OSC_HSE = 25 MHz + * VCO = 500MHz + * pll1_p = 250MHz / pll1_q = 250MHz pll1_r = 250Mhz + */ +struct pll_psc sys_pll_psc = { + .divm = 4, + .divn = 80, + .divp = 2, + .divq = 2, + .divr = 2, +}; + +int configure_clocks(struct udevice *dev) +{ + struct stm32_clk *priv = dev_get_priv(dev); + struct stm32_rcc_regs *regs = priv->rcc_base; + uint8_t *pwr_base = (uint8_t *)regmap_get_range(priv->pwr_regmap, 0); + uint32_t pllckselr = 0; + uint32_t pll1divr = 0; + uint32_t pllcfgr = 0; + + /* Switch on HSI */ + setbits_le32(®s->cr, RCC_CR_HSION); + while (!(readl(®s->cr) & RCC_CR_HSIRDY)) + ; + + /* Reset CFGR, now HSI is the default system clock */ + writel(0, ®s->cfgr); + + /* Set all kernel domain clock registers to reset value*/ + writel(0x0, ®s->d1ccipr); + writel(0x0, ®s->d2ccip1r); + writel(0x0, ®s->d2ccip2r); + + /* Set voltage scaling at scale 1 */ + clrsetbits_le32(pwr_base + PWR_D3CR, PWR_D3CR_VOS_MASK, + VOS_SCALE_1 << PWR_D3CR_VOS_SHIFT); + /* disable step down converter */ + clrbits_le32(pwr_base + PWR_CR3, PWR_CR3_SDEN); + while (!(readl(pwr_base + PWR_D3CR) & PWR_D3CR_VOSREADY)) + ; + + /* disable HSE to configure it */ + clrbits_le32(®s->cr, RCC_CR_HSEON); + while ((readl(®s->cr) & RCC_CR_HSERDY)) + ; + + /* clear HSE bypass and set it ON */ + clrbits_le32(®s->cr, RCC_CR_HSEBYP); + /* Switch on HSE */ + setbits_le32(®s->cr, RCC_CR_HSEON); + while (!(readl(®s->cr) & RCC_CR_HSERDY)) + ; + + /* pll setup, disable it */ + clrbits_le32(®s->cr, RCC_CR_PLL1ON); + while ((readl(®s->cr) & RCC_CR_PLL1RDY)) + ; + + /* Select HSE as PLL clock source */ + pllckselr |= RCC_PLLCKSELR_PLLSRC_HSE; + pllckselr |= sys_pll_psc.divm << RCC_PLLCKSELR_DIVM1_SHIFT; + writel(pllckselr, ®s->pllckselr); + + pll1divr |= (sys_pll_psc.divr - 1) << RCC_PLL1DIVR_DIVR1_SHIFT; + pll1divr |= (sys_pll_psc.divq - 1) << RCC_PLL1DIVR_DIVQ1_SHIFT; + pll1divr |= (sys_pll_psc.divp - 1) << RCC_PLL1DIVR_DIVP1_SHIFT; + pll1divr |= (sys_pll_psc.divn - 1); + writel(pll1divr, ®s->pll1divr); + + pllcfgr |= PLL1RGE_4_8_MHZ << RCC_PLLCFGR_PLL1RGE_SHIFT; + pllcfgr |= RCC_PLLCFGR_DIVP1EN; + pllcfgr |= RCC_PLLCFGR_DIVQ1EN; + pllcfgr |= RCC_PLLCFGR_DIVR1EN; + writel(pllcfgr, ®s->pllcfgr); + + /* pll setup, enable it */ + setbits_le32(®s->cr, RCC_CR_PLL1ON); + + /* set HPRE (/2) DI clk --> 125MHz */ + clrsetbits_le32(®s->d1cfgr, RCC_D1CFGR_HPRE_MASK, + RCC_D1CFGR_HPRE_DIV2); + + /* select PLL1 as system clock source (sys_ck)*/ + clrsetbits_le32(®s->cfgr, RCC_CFGR_SW_MASK, RCC_CFGR_SW_PLL1); + while ((readl(®s->cfgr) & RCC_CFGR_SW_MASK) != RCC_CFGR_SW_PLL1) + ; + + /* sdram: use pll1_q as fmc_k clk */ + clrsetbits_le32(®s->d1ccipr, RCC_D1CCIPR_FMCSRC_MASK, + FMCSRC_PLL1_Q_CK); + + return 0; +} + +static u32 stm32_get_HSI_divider(struct stm32_rcc_regs *regs) +{ + u32 divider; + + /* get HSI divider value */ + divider = readl(®s->cr) & RCC_CR_HSIDIV_MASK; + divider = divider >> RCC_CR_HSIDIV_SHIFT; + + return divider; +}; + +enum pllsrc { + HSE, + LSE, + HSI, + CSI, + I2S, + TIMER, + PLLSRC_NB, +}; + +static const char * const pllsrc_name[PLLSRC_NB] = { + [HSE] = "clk-hse", + [LSE] = "clk-lse", + [HSI] = "clk-hsi", + [CSI] = "clk-csi", + [I2S] = "clk-i2s", + [TIMER] = "timer-clk" +}; + +static ulong stm32_get_rate(struct stm32_rcc_regs *regs, enum pllsrc pllsrc) +{ + struct clk clk; + struct udevice *fixed_clock_dev = NULL; + u32 divider; + int ret; + const char *name = pllsrc_name[pllsrc]; + + debug("%s name %s\n", __func__, name); + + clk.id = 0; + ret = uclass_get_device_by_name(UCLASS_CLK, name, &fixed_clock_dev); + if (ret) { + error("Can't find clk %s (%d)", name, ret); + return 0; + } + + ret = clk_request(fixed_clock_dev, &clk); + if (ret) { + error("Can't request %s clk (%d)", name, ret); + return 0; + } + + divider = 0; + if (pllsrc == HSI) + divider = stm32_get_HSI_divider(regs); + + debug("%s divider %d rate %ld\n", __func__, + divider, clk_get_rate(&clk)); + + return clk_get_rate(&clk) >> divider; +}; + +enum pll1_output { + PLL1_P_CK, + PLL1_Q_CK, + PLL1_R_CK, +}; + +static u32 stm32_get_PLL1_rate(struct stm32_rcc_regs *regs, + enum pll1_output output) +{ + ulong pllsrc = 0; + u32 divm1, divn1, divp1, divq1, divr1, fracn1; + ulong vco, rate; + + /* get the PLLSRC */ + switch (readl(®s->pllckselr) & RCC_PLLCKSELR_PLLSRC_MASK) { + case RCC_PLLCKSELR_PLLSRC_HSI: + pllsrc = stm32_get_rate(regs, HSI); + break; + case RCC_PLLCKSELR_PLLSRC_CSI: + pllsrc = stm32_get_rate(regs, CSI); + break; + case RCC_PLLCKSELR_PLLSRC_HSE: + pllsrc = stm32_get_rate(regs, HSE); + break; + case RCC_PLLCKSELR_PLLSRC_NO_CLK: + /* shouldn't happen */ + error("wrong value for RCC_PLLCKSELR register\n"); + pllsrc = 0; + break; + } + + /* pllsrc = 0 ? no need to go ahead */ + if (!pllsrc) + return pllsrc; + + /* get divm1, divp1, divn1 and divr1 */ + divm1 = readl(®s->pllckselr) & RCC_PLLCKSELR_DIVM1_MASK; + divm1 = divm1 >> RCC_PLLCKSELR_DIVM1_SHIFT; + + divn1 = (readl(®s->pll1divr) & RCC_PLL1DIVR_DIVN1_MASK) + 1; + + divp1 = readl(®s->pll1divr) & RCC_PLL1DIVR_DIVP1_MASK; + divp1 = (divp1 >> RCC_PLL1DIVR_DIVP1_SHIFT) + 1; + + divq1 = readl(®s->pll1divr) & RCC_PLL1DIVR_DIVQ1_MASK; + divq1 = (divq1 >> RCC_PLL1DIVR_DIVQ1_SHIFT) + 1; + + divr1 = readl(®s->pll1divr) & RCC_PLL1DIVR_DIVR1_MASK; + divr1 = (divr1 >> RCC_PLL1DIVR_DIVR1_SHIFT) + 1; + + fracn1 = readl(®s->pll1fracr) & RCC_PLL1DIVR_DIVR1_MASK; + fracn1 = fracn1 & RCC_PLL1DIVR_DIVR1_SHIFT; + + vco = (pllsrc / divm1) * divn1; + rate = (pllsrc * fracn1) / (divm1 * 8192); + + debug("%s divm1 = %d divn1 = %d divp1 = %d divq1 = %d divr1 = %d\n", + __func__, divm1, divn1, divp1, divq1, divr1); + debug("%s fracn1 = %d vco = %ld rate = %ld\n", + __func__, fracn1, vco, rate); + + switch (output) { + case PLL1_P_CK: + return (vco + rate) / divp1; + break; + case PLL1_Q_CK: + return (vco + rate) / divq1; + break; + + case PLL1_R_CK: + return (vco + rate) / divr1; + break; + } + + return -EINVAL; +} + +static ulong stm32_clk_get_rate(struct clk *clk) +{ + struct stm32_clk *priv = dev_get_priv(clk->dev); + struct stm32_rcc_regs *regs = priv->rcc_base; + ulong sysclk = 0; + u32 gate_offset; + u32 d1cfgr; + /* prescaler table lookups for clock computation */ + u16 prescaler_table[8] = {2, 4, 8, 16, 64, 128, 256, 512}; + u8 source, idx; + + /* + * get system clock (sys_ck) source + * can be HSI_CK, CSI_CK, HSE_CK or pll1_p_ck + */ + source = readl(®s->cfgr) & RCC_CFGR_SW_MASK; + switch (source) { + case RCC_CFGR_SW_PLL1: + sysclk = stm32_get_PLL1_rate(regs, PLL1_P_CK); + break; + case RCC_CFGR_SW_HSE: + sysclk = stm32_get_rate(regs, HSE); + break; + + case RCC_CFGR_SW_CSI: + sysclk = stm32_get_rate(regs, CSI); + break; + + case RCC_CFGR_SW_HSI: + sysclk = stm32_get_rate(regs, HSI); + break; + } + + /* sysclk = 0 ? no need to go ahead */ + if (!sysclk) + return sysclk; + + debug("%s system clock: source = %d freq = %ld\n", + __func__, source, sysclk); + + d1cfgr = readl(®s->d1cfgr); + + if (d1cfgr & RCC_D1CFGR_D1CPRE_DIVIDED) { + /* get D1 domain Core prescaler */ + idx = (d1cfgr & RCC_D1CFGR_D1CPRE_DIVIDER) >> + RCC_D1CFGR_D1CPRE_SHIFT; + sysclk = sysclk / prescaler_table[idx]; + } + + if (d1cfgr & RCC_D1CFGR_HPRE_DIVIDED) { + /* get D1 domain AHB prescaler */ + idx = d1cfgr & RCC_D1CFGR_HPRE_DIVIDER; + sysclk = sysclk / prescaler_table[idx]; + } + + gate_offset = clk_map[clk->id].gate_offset; + + debug("%s clk->id=%ld gate_offset=0x%x sysclk=%ld\n", + __func__, clk->id, gate_offset, sysclk); + + switch (gate_offset) { + case RCC_AHB3ENR: + case RCC_AHB1ENR: + case RCC_AHB2ENR: + case RCC_AHB4ENR: + return sysclk; + break; + + case RCC_APB3ENR: + if (d1cfgr & RCC_D1CFGR_D1PPRE_DIVIDED) { + /* get D1 domain APB3 prescaler */ + idx = (d1cfgr & RCC_D1CFGR_D1PPRE_DIVIDER) >> + RCC_D1CFGR_D1PPRE_SHIFT; + sysclk = sysclk / prescaler_table[idx]; + } + + debug("%s system clock: freq after APB3 prescaler = %ld\n", + __func__, sysclk); + + return sysclk; + break; + + case RCC_APB4ENR: + if (d1cfgr & RCC_D3CFGR_D3PPRE_DIVIDED) { + /* get D3 domain APB4 prescaler */ + idx = (d1cfgr & RCC_D3CFGR_D3PPRE_DIVIDER) >> + RCC_D3CFGR_D3PPRE_SHIFT; + sysclk = sysclk / prescaler_table[idx]; + } + + debug("%s system clock: freq after APB4 prescaler = %ld\n", + __func__, sysclk); + + return sysclk; + break; + + case RCC_APB1LENR: + case RCC_APB1HENR: + if (d1cfgr & RCC_D2CFGR_D2PPRE1_DIVIDED) { + /* get D2 domain APB1 prescaler */ + idx = (d1cfgr & RCC_D2CFGR_D2PPRE1_DIVIDER) >> + RCC_D2CFGR_D2PPRE1_SHIFT; + sysclk = sysclk / prescaler_table[idx]; + } + + debug("%s system clock: freq after APB1 prescaler = %ld\n", + __func__, sysclk); + + return sysclk; + break; + + case RCC_APB2ENR: + if (d1cfgr & RCC_D2CFGR_D2PPRE2_DIVIDED) { + /* get D2 domain APB1 prescaler */ + idx = (d1cfgr & RCC_D2CFGR_D2PPRE2_DIVIDER) >> + RCC_D2CFGR_D2PPRE2_SHIFT; + sysclk = sysclk / prescaler_table[idx]; + } + + debug("%s system clock: freq after APB2 prescaler = %ld\n", + __func__, sysclk); + + return sysclk; + break; + + default: + error("unexpected gate_offset value (0x%x)\n", gate_offset); + return -EINVAL; + break; + } +} + +static int stm32_clk_enable(struct clk *clk) +{ + struct stm32_clk *priv = dev_get_priv(clk->dev); + struct stm32_rcc_regs *regs = priv->rcc_base; + u32 gate_offset; + u32 gate_bit_index; + unsigned long clk_id = clk->id; + + gate_offset = clk_map[clk_id].gate_offset; + gate_bit_index = clk_map[clk_id].gate_bit_idx; + + debug("%s: clkid=%ld gate offset=0x%x bit_index=%d name=%s\n", + __func__, clk->id, gate_offset, gate_bit_index, + clk_map[clk_id].name); + + setbits_le32(®s->cr + (gate_offset / 4), BIT(gate_bit_index)); + + return 0; +} + +static int stm32_clk_probe(struct udevice *dev) +{ + struct stm32_clk *priv = dev_get_priv(dev); + struct udevice *syscon; + fdt_addr_t addr; + int err; + + addr = dev_read_addr(dev); + if (addr == FDT_ADDR_T_NONE) + return -EINVAL; + + priv->rcc_base = (struct stm32_rcc_regs *)addr; + + /* get corresponding syscon phandle */ + err = uclass_get_device_by_phandle(UCLASS_SYSCON, dev, + "st,syscfg", &syscon); + + if (err) { + error("unable to find syscon device\n"); + return err; + } + + priv->pwr_regmap = syscon_get_regmap(syscon); + if (!priv->pwr_regmap) { + error("unable to find regmap\n"); + return -ENODEV; + } + + configure_clocks(dev); + + return 0; +} + +static int stm32_clk_of_xlate(struct clk *clk, + struct ofnode_phandle_args *args) +{ + if (args->args_count != 1) { + debug("Invaild args_count: %d\n", args->args_count); + return -EINVAL; + } + + if (args->args_count) { + clk->id = args->args[0]; + /* + * this computation convert DT clock index which is used to + * point into 2 separate clock arrays (peripheral and kernel + * clocks bank) (see include/dt-bindings/clock/stm32h7-clks.h) + * into index to point into only one array where peripheral + * and kernel clocks are consecutive + */ + if (clk->id >= KERN_BANK) { + clk->id -= KERN_BANK; + clk->id += LAST_PERIF_BANK - PERIF_BANK + 1; + } else { + clk->id -= PERIF_BANK; + } + } else { + clk->id = 0; + } + + debug("%s clk->id %ld\n", __func__, clk->id); + + return 0; +} + +static struct clk_ops stm32_clk_ops = { + .of_xlate = stm32_clk_of_xlate, + .enable = stm32_clk_enable, + .get_rate = stm32_clk_get_rate, +}; + +U_BOOT_DRIVER(stm32h7_clk) = { + .name = "stm32h7_rcc_clock", + .id = UCLASS_CLK, + .ops = &stm32_clk_ops, + .probe = stm32_clk_probe, + .priv_auto_alloc_size = sizeof(struct stm32_clk), + .flags = DM_FLAG_PRE_RELOC, +}; diff --git a/include/dt-bindings/clock/stm32h7-clks.h b/include/dt-bindings/clock/stm32h7-clks.h new file mode 100644 index 0000000000..4d87e7ebc3 --- /dev/null +++ b/include/dt-bindings/clock/stm32h7-clks.h @@ -0,0 +1,167 @@ +/* SYS, CORE AND BUS CLOCKS */ +#define SYS_D1CPRE 0 +#define HCLK 1 +#define PCLK1 2 +#define PCLK2 3 +#define PCLK3 4 +#define PCLK4 5 +#define HSI_DIV 6 +#define HSE_1M 7 +#define I2S_CKIN 8 +#define CK_DSI_PHY 9 +#define HSE_CK 10 +#define LSE_CK 11 +#define CSI_KER_DIV122 12 +#define RTC_CK 13 +#define CPU_SYSTICK 14 + +/* OSCILLATOR BANK */ +#define OSC_BANK 18 +#define HSI_CK 18 +#define HSI_KER_CK 19 +#define CSI_CK 20 +#define CSI_KER_CK 21 +#define RC48_CK 22 +#define LSI_CK 23 + +/* MCLOCK BANK */ +#define MCLK_BANK 28 +#define PER_CK 28 +#define PLLSRC 29 +#define SYS_CK 30 +#define TRACEIN_CK 31 + +/* ODF BANK */ +#define ODF_BANK 32 +#define PLL1_P 32 +#define PLL1_Q 33 +#define PLL1_R 34 +#define PLL2_P 35 +#define PLL2_Q 36 +#define PLL2_R 37 +#define PLL3_P 38 +#define PLL3_Q 39 +#define PLL3_R 40 + +/* MCO BANK */ +#define MCO_BANK 41 +#define MCO1 41 +#define MCO2 42 + +/* PERIF BANK */ +#define PERIF_BANK 50 +#define D1SRAM1_CK 50 +#define ITCM_CK 51 +#define DTCM2_CK 52 +#define DTCM1_CK 53 +#define FLITF_CK 54 +#define JPGDEC_CK 55 +#define DMA2D_CK 56 +#define MDMA_CK 57 +#define USB2ULPI_CK 58 +#define USB1ULPI_CK 59 +#define ETH1RX_CK 60 +#define ETH1TX_CK 61 +#define ETH1MAC_CK 62 +#define ART_CK 63 +#define DMA2_CK 64 +#define DMA1_CK 65 +#define D2SRAM3_CK 66 +#define D2SRAM2_CK 67 +#define D2SRAM1_CK 68 +#define HASH_CK 69 +#define CRYPT_CK 70 +#define CAMITF_CK 71 +#define BKPRAM_CK 72 +#define HSEM_CK 73 +#define BDMA_CK 74 +#define CRC_CK 75 +#define GPIOK_CK 76 +#define GPIOJ_CK 77 +#define GPIOI_CK 78 +#define GPIOH_CK 79 +#define GPIOG_CK 80 +#define GPIOF_CK 81 +#define GPIOE_CK 82 +#define GPIOD_CK 83 +#define GPIOC_CK 84 +#define GPIOB_CK 85 +#define GPIOA_CK 86 +#define WWDG1_CK 87 +#define DAC12_CK 88 +#define WWDG2_CK 89 +#define TIM14_CK 90 +#define TIM13_CK 91 +#define TIM12_CK 92 +#define TIM7_CK 93 +#define TIM6_CK 94 +#define TIM5_CK 95 +#define TIM4_CK 96 +#define TIM3_CK 97 +#define TIM2_CK 98 +#define MDIOS_CK 99 +#define OPAMP_CK 100 +#define CRS_CK 101 +#define TIM17_CK 102 +#define TIM16_CK 103 +#define TIM15_CK 104 +#define TIM8_CK 105 +#define TIM1_CK 106 +#define TMPSENS_CK 107 +#define RTCAPB_CK 108 +#define VREF_CK 109 +#define COMP12_CK 110 +#define SYSCFG_CK 111 +/* must be equal to last peripheral clock index */ +#define LAST_PERIF_BANK SYSCFG_CK + +/* KERNEL BANK */ +#define KERN_BANK 120 +#define SDMMC1_CK 120 +#define QUADSPI_CK 121 +#define FMC_CK 122 +#define USB2OTG_CK 123 +#define USB1OTG_CK 124 +#define ADC12_CK 125 +#define SDMMC2_CK 126 +#define RNG_CK 127 +#define ADC3_CK 128 +#define DSI_CK 129 +#define LTDC_CK 130 +#define USART8_CK 131 +#define USART7_CK 132 +#define HDMICEC_CK 133 +#define I2C3_CK 134 +#define I2C2_CK 135 +#define I2C1_CK 136 +#define UART5_CK 137 +#define UART4_CK 138 +#define USART3_CK 139 +#define USART2_CK 140 +#define SPDIFRX_CK 141 +#define SPI3_CK 142 +#define SPI2_CK 143 +#define LPTIM1_CK 144 +#define FDCAN_CK 145 +#define SWP_CK 146 +#define HRTIM_CK 147 +#define DFSDM1_CK 148 +#define SAI3_CK 149 +#define SAI2_CK 150 +#define SAI1_CK 151 +#define SPI5_CK 152 +#define SPI4_CK 153 +#define SPI1_CK 154 +#define USART6_CK 155 +#define USART1_CK 156 +#define SAI4B_CK 157 +#define SAI4A_CK 158 +#define LPTIM5_CK 159 +#define LPTIM4_CK 160 +#define LPTIM3_CK 161 +#define LPTIM2_CK 162 +#define I2C4_CK 163 +#define SPI6_CK 164 +#define LPUART1_CK 165 + +#define STM32H7_MAX_CLKS 166