From: Haavard Skinnemoen Date: Thu, 22 Jan 2009 10:11:09 +0000 (+0100) Subject: Merge branch 'fixes' X-Git-Tag: v2009.03-rc1~202 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=4d0b54685c5c656023b826089ef8cc0ea1c5cd9e;hp=92c78a3bbcb2ce508b4bf1c4a1e0940406a024bb;p=u-boot Merge branch 'fixes' --- diff --git a/CHANGELOG b/CHANGELOG index 9af36c123b..bd3a7b76d8 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,765 @@ +commit 635e5f8fc82365e6e9734b3132bc95135a6de679 +Author: Wolfgang Denk +Date: Sun Jan 18 21:37:48 2009 +0100 + + Prepare 2009.01-rc3 + + Update CHANGELOG + + Signed-off-by: Wolfgang Denk + +commit 4cda437898f7873752f0201757cd33f12196ce87 +Author: Mike Frysinger +Date: Sat Jan 17 13:32:42 2009 -0500 + + build system: treat all Darwin's alike + + The x86 based version of Darwin behaves the same quirky way as the powerpc + Darwin, so only check HOSTOS when setting up Darwin workarounds. + + Signed-off-by: Mike Frysinger + +commit c088a108c75db565e07292fd668dfa5491e85bc2 +Author: Peter Korsgaard +Date: Wed Jan 14 13:52:24 2009 +0100 + + fdt_resize(): fix actualsize calculations with unaligned blobs + + The code in fdt_resize() to extend the fdt size to end on a page boundary + is wrong for fdt's not located at an address aligned on a page boundary. + What's even worse, the code would make actualsize shrink rather than grow + if (blob & 0xfff) was bigger than the amount of padding added by ALIGN(), + causing fdt_add_mem_rsv to fail. + + Fix it by aligning end address (blob + size) to a page boundary instead. + For aligned fdt's this is equivalent to what we had before. + + Signed-off-by: Peter Korsgaard + +commit fadad1573fb16c90025f08a2861d6047d093cba7 +Author: Mike Frysinger +Date: Fri Jan 9 04:38:17 2009 -0500 + + ncb: use socklen_t + + The recvfrom() function takes a socklen_t, not an int. + + Signed-off-by: Mike Frysinger + +commit fc83c9273cec6e6e542f4a0ea3b653b7d0513ffa +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Jan 11 16:35:16 2009 +0100 + + sh: serial: use readx/writex accessors + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Nobuhiro Iwamatsu + +commit 9e1fa628bdb64745811cdd26c4f953846c076180 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Jan 11 16:35:15 2009 +0100 + + sh: serial: coding style cleanup + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Nobuhiro Iwamatsu + +commit c9935c992575922b7ef13eec0656ed8665d324e3 +Author: Nobuhiro Iwamatsu +Date: Sun Jan 11 17:48:56 2009 +0900 + + sh: Fix compile error on lowlevel_init file + + lowlevel_init of SH was corrected to use the write/readXX macro. + However, there was a problem that was not able to be compiled partially. + This patch corrected this. + + Signed-off-by: Nobuhiro Iwamatsu + +commit a5b04d00bfeb940c62232972ce644d50b45797f9 +Author: Kieran Bingham +Date: Tue Dec 30 01:16:03 2008 +0000 + + sh: Fix up rsk7203 target for out of tree build + + Fix up rsk7203 target to build successfully using out-of-tree build. + + Signed-off-by: Kieran Bingham + Signed-off-by: Nobuhiro Iwamatsu + +commit f7e78f3b74aae9caca2997bad865a72338326c0a +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Dec 20 19:29:49 2008 +0100 + + sh: use write{8,16,32} in all lowlevel_init + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Nobuhiro Iwamatsu + +commit e4430779623af500de1cee7892c379f07ef59813 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Dec 20 19:29:48 2008 +0100 + + sh: lowlevel_init coding style cleanup + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Nobuhiro Iwamatsu + +commit 85cb052ee41675ca361e6a4c69455dc715c8f2d9 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Dec 20 15:27:45 2008 +0100 + + sh: update sh2/sh2a timer coding style + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Nobuhiro Iwamatsu + +commit 1e15ff999322e81af4c0c0c548908f38944ba39c +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Dec 20 15:25:22 2008 +0100 + + sh: update sh timer coding style + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Nobuhiro Iwamatsu + +commit 0e3ece33801e377be67ffa29f083421ad820f28b +Author: Wolfgang Denk +Date: Wed Jan 14 23:26:05 2009 +0100 + + Prepare 2009.01-rc2 + + Update CHANGELOG. + + Signed-off-by: Wolfgang Denk + +commit e92c9a860e44c14513c8909ce4299e253a775eeb +Author: Wolfgang Denk +Date: Wed Jan 14 22:35:30 2009 +0100 + + cpu/mpc824x/Makefile: fix warning with parallel builds + + Parallel builds would occasionally issue this build warning: + + ln: creating symbolic link `cpu/mpc824x/bedbug_603e.c': File exists + + Use "ln -sf" as quick work around for the issue. + + Signed-off-by: Wolfgang Denk + +commit 3ba605d4beec649438539e7df97b5fedb26592fb +Author: Matthias Fuchs +Date: Fri Jan 2 12:18:49 2009 +0100 + + ppc4xx: Add loadpci command to esd's CPCI4052 and CPCI405AB boards + + This patch adds esd's loadpci BSP command to CPCI4052 and + CPCI405AB board. This requires CONFIG_CMD_BSP and CONFIG_PRAM. + + Signed-off-by: Matthias Fuchs + Signed-off-by: Stefan Roese + +commit 600fe46fb3dab7f07604f9009904f31584415114 +Author: Matthias Fuchs +Date: Fri Jan 2 12:18:12 2009 +0100 + + ppc4xx: Disable pci node in device tree on CPCI405 pci adapters + + Signed-off-by: Matthias Fuchs + Signed-off-by: Stefan Roese + +commit f6a1f490d224c600a09137e58d1026d150b8e679 +Author: Matthias Fuchs +Date: Fri Jan 2 12:17:36 2009 +0100 + + ppc4xx: Cleanup CPCI405 board code + + This patch cleans up CPCI405 board support: + - wrap long lines + - unification of spaces in function calls + - remove dead code + + Use correct io accessors on peripherals. + + Signed-off-by: Matthias Fuchs + Signed-off-by: Stefan Roese + +commit fceebb45a0b97e92f9889861f8c3b9cb885e706f +Author: Matthias Fuchs +Date: Fri Jan 2 12:16:35 2009 +0100 + + ppc4xx: Enable auto RS485 mode on PLU405 boards + + This patch turns on the auto RS485 mode in the 2nd external + uart on PLU405 boards. This is a special mode of the used + Exar XR16C2850 uart. Because these boards only have a 485 physical + layer connected it's a good idea to turn it on by default. + + Signed-off-by: Matthias Fuchs + Signed-off-by: Stefan Roese + +commit b5f65dfa9aa8e068e62aba4733dc4fd97b1d9bf6 +Author: Haiying Wang +Date: Tue Jan 13 16:29:28 2009 -0500 + + Some changes of TLB entry setting for MPC8572DS + + - Move the TLB entry of PIXIS_BASE from TLB0 to TLB1[8], because in CAMP mode, + all the TLB0 entries will be invalidated after cpu1 brings up kernel, thus cpu0 + can not access PIXIS_BASE anymore (any access will cause DataTLBError exception) + + - Set CONFIG_SYS_DDR_TLB_START to 9 for MPC8572DS board. + + Signed-off-by: Haiying Wang + +commit 950264317eb9594b2b5ee2fb65206200a1c6007a +Author: Haiying Wang +Date: Tue Jan 13 16:29:22 2009 -0500 + + Change DDR tlb start entry to CONFIG param for 85xx + + So that we can locate the DDR tlb start entry to the value other than 8. By + default, it is still 8. + + Signed-off-by: Haiying Wang + +commit 6d3a10f73ece7ffb736890c10e023222612a4aa0 +Author: Roy Zang +Date: Fri Jan 9 16:02:35 2009 +0800 + + Change PCIE1&2 deciide logic on MPC8544DS board more readable + + The IO port selection for MPC8544DS board: + Port cfg_io_ports + PCIE1 0x2, 0x3, 0x4, 0x5, 0x6, 0x7 + PCIE2 0x4, 0x5, 0x6, 0x7 + PCIE3 0x6, 0x7 + This patch changes the PCIE12 and PCIE2 logic more readable. + Signed-off-by: Roy Zang + +commit 028e116811d28a031660f1ad9e20ac1293b3c5c7 +Author: Roy Zang +Date: Fri Jan 9 16:01:52 2009 +0800 + + PCIE2 and PCIE3 are decided by corresponing bit in devdisr instead of PCIE1 bit + + PCIE2 and PCIE3 should be decided by corresponing bit in devdisr instead of + PCIE1 bit. + On MPC8572DS board, PCIE refers to PCIE1. + Signed-off-by: Roy Zang + +commit 9afc2ef0307aecf52482df67c31b75d5f9e66b47 +Author: Roy Zang +Date: Fri Jan 9 16:00:55 2009 +0800 + + Fix IO port selection issue on MPC8544DS and MPC8572DS boards + + The IO port selection is not correct on MPC8572DS and MPC8544DS board. + This patch fixes this issue. + For MPC8572 + Port cfg_io_ports + PCIE1 0x2, 0x3, 0x7, 0xb, 0xc, 0xf + PCIE2 0x3, 0x7 + PCIE3 0x7 + + For MPC8544 + Port cfg_io_ports + PCIE1 0x2, 0x3, 0x4, 0x5, 0x6, 0x7 + PCIE2 0x4, 0x5, 0x6, 0x7 + PCIE3 0x6, 0x7 + Signed-off-by: Roy Zang + +commit 3e3fffe3baf3befde287fec1fcbfe55052fb8946 +Author: Becky Bruce +Date: Wed Dec 3 22:36:44 2008 -0600 + + mpc8610hpcd: Fix PCI mapping concepts + + Rename _BASE to _BUS, as it's actually a PCI bus address, + separate virtual and physical addresses into _VIRT and _PHYS, + and use each appopriately. This makes the code easier to read + and understand, and facilitates mapping changes going forward. + + Signed-off-by: Becky Bruce + +commit 79e436cad3b4a7db88408c3f05175028f30d700d +Author: Becky Bruce +Date: Wed Dec 3 22:36:26 2008 -0600 + + sbc8641d: Fix PCI mapping concepts + + Rename _BASE to _BUS, as it's actually a PCI bus address, + separate virtual and physical addresses into _VIRT and _PHYS, + and use each appopriately. This makes the code easier to read + and understand, and facilitates mapping changes going forward. + + Signed-off-by: Becky Bruce + +commit a9f3acbcd07da72b5446ce557531a3ed8b8beff0 +Author: Wolfgang Denk +Date: Mon Jan 12 14:50:35 2009 +0100 + + MPC86xx: fix build warnings + + Signed-off-by: Wolfgang Denk + +commit 032a1c934ef4dc003281f57302b6e693062c1868 +Author: Mike Frysinger +Date: Mon Jan 5 16:09:44 2009 -0500 + + bf537-stamp/nand: fix board_nand_init prototype + + The board_nand_init() function should return an int, not void. + + Signed-off-by: Mike Frysinger + +commit 687f952e4119594ab913be11c90f7f018c2a7a79 +Author: Mike Frysinger +Date: Thu Dec 11 07:04:48 2008 -0500 + + Blackfin: drop CONFIG_SPI handling in board init + + The eeprom SPI init functions are duplicated as the common code already + executes these for us. + + Signed-off-by: Mike Frysinger + +commit e7e684b10d73a303902208594c7c3e7e0d753282 +Author: Mike Frysinger +Date: Fri Oct 24 17:51:57 2008 -0400 + + Blackfin: fix out-of-tree building with ldscripts + + Many of the Blackfin board linker scripts are preprocessed, so make sure we + output the linker script into the build tree rather than the source tree. + + Signed-off-by: Mike Frysinger + +commit b9eecc342f767b50e1476fbc1aad7d88dd4ce5eb +Author: Mike Frysinger +Date: Fri Oct 24 17:48:54 2008 -0400 + + Blackfin: fix linker scripts to work with --gc-sections + + Make sure all .text sections get pulled in and the entry point is properly + referenced so they don't get discarded when linking with --gc-sections. + + Signed-off-by: Mike Frysinger + +commit 509fc553bc6087a6f705b3bf52f3950d7d1eaa58 +Author: Mike Frysinger +Date: Sat Oct 11 20:45:44 2008 -0400 + + Blackfin: set proper LDRFLAGS for parallel booting LDRs + + In order to boot an LDR out of parallel flash, the ldr utility needs a few + flags to tell it to generate the right header. + + Signed-off-by: Mike Frysinger + +commit 3dd9395a0d7ce69a335d0e743c04b9caedd681d3 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Tue Jan 6 21:41:59 2009 +0100 + + at91rm9200: move define from lowlevel_init to header + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 8a48686fac2030287765f1970ea046bd5734b733 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Jan 3 17:22:26 2009 +0100 + + m501sk: move to the common memory setup + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit d481c80d78f954133c035dae6c7d22de3625795d +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Jan 3 17:22:25 2009 +0100 + + at91rm9200: rename lowlevel init value to CONFIG_SYS_ + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 4e170b16625291aa10d0d9abc3f34e8a5945d157 +Author: Nicolas Ferre +Date: Tue Jan 6 21:13:14 2009 +0100 + + at91: add at91sam9xeek board support + + At91sam9xe is basically an at91sam9260 with embedded flash. We can manage + it as another entry for at91sam9260 in the Makefile. + + Check documentation at : + http://www.atmel.com/dyn/products/product_card.asp?part_id=4263 + + Signed-off-by: Nicolas Ferre + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 9ffd53db870a7da134f9a1ae76894a6b31237be5 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Tue Jan 6 21:15:57 2009 +0100 + + fix bmp_logo.h make dependencies to allow parallel build + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit e12d9a8fb48d24176efffccc072b445e60a3afe4 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Jan 3 17:22:24 2009 +0100 + + at91: Fix Atmel's at91sam9 boards out of tree build + + introduced in commit 89a7a87f084c + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 0668236bafaa1c11c521652a2facebc74beecbf0 +Author: Wolfgang Denk +Date: Tue Dec 30 22:56:11 2008 +0100 + + README: update mailing list name and hits to patch submission. + + Signed-off-by: Wolfgang Denk + +commit d9011f9b75561a0bd9254934c2bb2bc799d4f645 +Author: Peter Tyser +Date: Tue Dec 23 16:32:01 2008 -0600 + + 85xx: Enable inbound PCI config cycles for X-ES boards cleanup + + Signed-off-by: Peter Tyser + +commit 1f03cbfae221b24ba1341a0a3f62ff01c5c874df +Author: Peter Tyser +Date: Tue Dec 23 16:32:00 2008 -0600 + + XPedite5200 board support cleanup + + Signed-off-by: Peter Tyser + +commit fea91edee8ae0295e3c30b1ff544df51f4d668e1 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Tue Dec 2 21:58:04 2008 +0100 + + usb_kbd: fix usb_kbd_deregister when DEVICE_DEREGISTER not enable + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Remy Böhmer + +commit ada591d2a0ecff5f9bc5ed1ebf310f439c3d0a28 +Author: Trent Piepho +Date: Wed Dec 3 15:16:37 2008 -0800 + + mpc8[56]xx: Put localbus clock in sysinfo and gd + + Currently MPC85xx and MPC86xx boards just calculate the localbus frequency + and print it out, but don't save it. + + This changes where its calculated and stored to be more consistent with the + CPU, CCB, TB, and DDR frequencies and the MPC83xx localbus clock. + + The localbus frequency is added to sysinfo and calculated when sysinfo is + set up, in cpu/mpc8[56]xx/speed.c, the same as the other frequencies are. + + get_clocks() copies the frequency into the global data, as the other + frequencies are, into a new field that is only enabled for MPC85xx and + MPC86xx. + + checkcpu() in cpu/mpc8[56]xx/cpu.c will print out the local bus frequency + from sysinfo, like the other frequencies, instead of calculating it on the + spot. + + Signed-off-by: Trent Piepho + Acked-by: Kumar Gala + Acked-by: Jon Loeliger + +commit 9863d6aca11405e1e0d8aba2045d78aeec4d4ee7 +Author: Trent Piepho +Date: Wed Dec 3 15:16:36 2008 -0800 + + mpc86xx: Double local bus clock divider + + The local bus clock divider should be doubled for both 8610 and 8641. + + Signed-off-by: Trent Piepho + Acked-by: Kumar Gala + Acked-by: Jon Loeliger + +commit 446c381e3e16f19857b72ea0d06241267b8b9d58 +Author: Trent Piepho +Date: Wed Dec 3 15:16:35 2008 -0800 + + mpc8568: Double local bus clock divider + + The clock divider for the MPC8568 local bus should be doubled, like the + other newer MPC85xx chips. + + Since there are now more chips with a 2x divider than a 1x, and any new + 85xx chips will probably be 2x, invert the sense of the #if so that it + lists the 1x chips instead of the 2x ones. + + Signed-off-by: Trent Piepho + Acked-by: Kumar Gala + Acked-by: Jon Loeliger + +commit f51f07eb58fad12de9294ba4ee6c09a0ddeaee03 +Author: Dave Liu +Date: Tue Dec 16 12:09:27 2008 +0800 + + 85xx: Fix the boot window issue + + If one custom board is using the 8MB flash, it is set + as FLASH_BASE = 0xef000000, TEXT_BASE = 0xef780000. + The current start.S code will be broken at switch_as. + + It is because the TLB1[15] is set as 16MB page size, + EPN = TEXT_BASE & 0xff000000, RPN = 0xff000000. + + For the 8MB flash case, the EPN = 0xefxxxxxx, + RPN = 0xffxxxxxx. Assume the virt address of switch_as + is 0xef7ff18c, the real address of the instruction at + switch_as should be 0xff7ff18c. the 0xff7ff18c is out + of the range of the default 8MB boot LAW window + 0xff800000 - 0xffffffff. + + So when we switch to AS1 address space at switch_as, + the core can't fetch the instruction at switch_as any + more. It will cause broken issue. + + Signed-off-by: Dave Liu + +commit 58da8890d5fbd074746037722a423de9ac408616 +Author: Paul Gortmaker +Date: Thu Dec 11 15:47:50 2008 -0500 + + sbc8548: use proper PHY address + + The values given for the PHY address were wrong, so the code + read no valid PHY ID, and fell through to the generic PHY + support, which would work on 1000M but would not auto negotiate + down to 100M or 10M. + + Signed-off-by: Paul Gortmaker + +commit ad22f9273c6f24fbfa917e867680e9688e0c59c5 +Author: Paul Gortmaker +Date: Thu Dec 11 15:47:51 2008 -0500 + + sbc8548: enable command line editing by default. + + Lets make things a bit more user friendly. It isn't 1985 anymore. + + Signed-off-by: Paul Gortmaker + +commit bd93105fa171184a71ca8b22be03dc2705cfbd3f +Author: Paul Gortmaker +Date: Thu Dec 11 15:47:49 2008 -0500 + + sbc8548: don't enable the 3rd and 4th eTSEC + + These interfaces don't have usable connectors on the board, so don't + bother enumerating or configuring them. + + Signed-off-by: Paul Gortmaker + +commit 181a3650113883728927928b3ac81ad6dade4b2c +Author: Haiying Wang +Date: Wed Dec 3 10:08:19 2008 -0500 + + Set IVPR to kenrel entry point in second core boot page + + Assuming the OSes exception vectors start from the base of kernel address, and + the kernel physical starting address can be relocated to an non-zero address. + This patch enables the second core to have a valid IVPR for debugger before + kernel setting IVPR in CAMP mode. Otherwise, IVPR is 0x0 and it is not a valid + value for second core which runs kernel at different physical address other + than 0x0. + + Signed-off-by: Haiying Wang + +commit a5d212a263c58cc746481bf1fc878510533ce7d6 +Author: Trent Piepho +Date: Wed Dec 3 15:16:34 2008 -0800 + + mpc8xxx: LCRR[CLKDIV] is sometimes five bits + + On newer CPUs, 8536, 8572, and 8610, the CLKDIV field of LCRR is five bits + instead of four. + + In order to avoid an ifdef, LCRR_CLKDIV is set to 0x1f on all systems. It + should be safe as the fifth bit was defined as reserved and set to 0. + + Code that was using a hard coded 0x0f is changed to use LCRR_CLKDIV. + + Signed-off-by: Trent Piepho + Acked-by: Kumar Gala + Acked-by: Jon Loeliger + +commit 58ec4866ed916c7e422f5107bb27b0822084728e +Author: Trent Piepho +Date: Wed Dec 3 15:16:38 2008 -0800 + + mpc8[56]xx: Put localbus clock in device tree + + Export the localbus frequency in the device tree, the same way the CPU, TB, + CCB, and various other frequencies are exported in their respective device + tree nodes. + + Some localbus devices need this information to be programed correctly, so + it makes sense to export it along with the other frequencies. + + Unfortunately, when someone wrote the localbus dts bindings, they didn't + bother to define what the "compatible" property should be. So it seems no + one was quite sure what to put in their dts files. + + Based on current existing dts files in the kernel source, I've used + "fsl,pq3-localbus" and "fsl,elbc" for MPC85xx, which are used by almost all + of the 85xx devices, and are looked for by the Linux code. The eLBC is + apparently not entirely backward compatible with the pq3 LBC and so eLBC + equipped platforms like 8572 won't use pq3-localbus. + + For MPC86xx, I've used "fsl,elbc" which is used by some of the 86xx systems + and is also looked for by the Linux code. On MPC8641, I've also used + "fsl,mpc8641-localbus" as it is also commonly used in dts files, some of + which don't use "fsl,elbc" or any other acceptable name to match on. + + Signed-off-by: Trent Piepho + Acked-by: Kumar Gala + Acked-by: Jon Loeliger + +commit 9d94aff699eed38b286814fcbb335f3eb8516a0e +Author: Kumar Gala +Date: Tue Dec 16 14:59:22 2008 -0600 + + NAND FSL elbc: Use virt_to_phys to determine which bank is in use + + The current code that determines which bank/chipselect is used for a + given NAND instance only worked for 32-bit addresses and assumed + a 1:1 mapping. This breaks in 36-bit physical configs. + + The proper way to handle this is to use the virt_to_phys() and + BR_PHYS_ADDR() routinues to match the 34-bit lbc bus address + with the the virtual address the NAND code uses. + + Signed-off-by: Kumar Gala + Acked-by: Scott Wood + +commit 77c8115b1f1871811633eae77a5a700fac1f0e50 +Author: Kumar Gala +Date: Tue Dec 16 14:59:21 2008 -0600 + + ppc: Use addrmap in virt_to_phys and map_physmem. + + If we have addr map support enabled use the mapping functions to + implement virt_to_phys() and map_physmem(). + + Signed-off-by: Kumar Gala + +commit ecf5b98c7a6a2e2256dfddd48fab26678dcd6b90 +Author: Kumar Gala +Date: Tue Dec 16 14:59:20 2008 -0600 + + 85xx: Add support to populate addr map based on TLB settings + + Signed-off-by: Kumar Gala + +commit 78bbc5ce151c5a484bb51bf1866b4a993ffc16ec +Author: Peter Tyser +Date: Mon Dec 1 13:47:13 2008 -0600 + + XPedite5200 board support + + Initial support for Extreme Engineering Solutions XPedite5200 - + a MPC8548-based PMC single board computer. + + Signed-off-by: Peter Tyser + +commit 487dcb4fb89be0992bc06ec1341090017bd9cf2f +Author: Peter Tyser +Date: Wed Oct 29 12:39:27 2008 -0500 + + 85xx: Enable inbound PCI config cycles for X-ES boards + + Update X-ES Freescale boards to allow inbound PCI configuration + cycles when configured as agent/endpoint. + + Signed-off-by: Peter Tyser + +commit ccf0fdd02b97323f8caae18d06cc9daeac2f192f +Author: Peter Tyser +Date: Wed Dec 17 16:36:23 2008 -0600 + + XPedite5370 board support + + Initial support for Extreme Engineering Solutions XPedite5370 - + a MPC8572-based 3U VPX single board computer with a PMC/XMC + site. + + Signed-off-by: Peter Tyser + +commit e92739d34e2d6b6aca93b2598248210710897ce8 +Author: Peter Tyser +Date: Wed Dec 17 16:36:21 2008 -0600 + + Add support for PCA953x I2C gpio devices + + Initial support for NXP's 4 and 8 bit I2C gpio expanders + (eg pca9537, pca9557, etc). The CONFIG_PCA953X define + enables support for the devices while the CONFIG_CMD_PCA953X + define enables the pca953x command. The CONFIG_CMD_PCA953X_INFO + define enables an 'info' sub-command which provides summary + information for the given pca953x device. + + Signed-off-by: Peter Tyser + +commit 7a8979591171676417ab36852d8811a8c46accd8 +Author: Peter Tyser +Date: Wed Oct 29 12:39:26 2008 -0500 + + pci/fsl_pci_init: Enable inbound PCI config cycles + + Add fsl_pci_config_unlock() function to enable a + PCI/PCIe interface configured in agent/endpoint mode to + respond to inbound PCI configuration cycles. + + Signed-off-by: Peter Tyser + +commit b616f2b545f73757669b37386f0b37bb61fc6797 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Mon Sep 8 22:27:18 2008 +0200 + + MIPS: qemu_mips: update doc to generate and to use qemu flash, ide file + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Shinya Kuribayashi + +commit 16cdf816779f5b602a9b3b4d2ea4dea05095c35b +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Tue Dec 16 22:10:31 2008 +0100 + + MIPS: qemu_mips: update doc to use all disk and boot linux kernel + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Shinya Kuribayashi + +commit 13095b2f07dacb1f863772266c1789d47a523a8a +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Tue Dec 16 22:10:30 2008 +0100 + + MIPS: qemu_mips: move env storage just after u-boot + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Shinya Kuribayashi + +commit aced78d852d0b009e8aaa1445af8cb40861ee549 +Author: Wolfgang Denk +Date: Tue Dec 16 23:48:27 2008 +0100 + + Prepare 2009.01-rc1 + + Signed-off-by: Wolfgang Denk + commit 9e2a79b4c585ad31138fb90b68fd0234d64a8da8 Author: Wolfgang Denk Date: Tue Dec 16 23:13:46 2008 +0100 @@ -21,6 +783,18 @@ Date: Tue Dec 16 22:32:25 2008 +0100 Signed-off-by: Wolfgang Denk +commit ff49ea8977b56916edd5b1766d9939010e30b181 +Author: Scott Wood +Date: Tue Dec 16 14:24:16 2008 -0600 + + NAND: Mark the BBT as scanned prior to calling scan_bbt. + + Otherwise, recursion can occur if scan_bbt does not find a bad block + table, and tries to write one, and the attempt to erase the BBT area + causes a bad block check. + + Signed-off-by: Scott Wood + commit 584eedab66d0828f2d571a24b10526c4e65f547b Author: Ilya Yanok Date: Thu Dec 11 05:51:57 2008 +0300 diff --git a/MAINTAINERS b/MAINTAINERS index f04879555a..60def0c34d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -411,6 +411,10 @@ Rune Torgersen MPC8266ADS MPC8266 +Peter Tyser + + XPEDITE5200 MPC8548 + XPEDITE5370 MPC8572 David Updegraff diff --git a/MAKEALL b/MAKEALL index cc49a98080..5ce3f3112c 100755 --- a/MAKEALL +++ b/MAKEALL @@ -385,6 +385,8 @@ LIST_85xx=" \ TQM8548 \ TQM8555 \ TQM8560 \ + XPEDITE5200 \ + XPEDITE5370 \ " ######################################################################### diff --git a/Makefile b/Makefile index 4df48129b8..d533564d9a 100644 --- a/Makefile +++ b/Makefile @@ -24,7 +24,7 @@ VERSION = 2009 PATCHLEVEL = 01 SUBLEVEL = -EXTRAVERSION = -rc1 +EXTRAVERSION = ifneq "$(SUBLEVEL)" "" U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) else @@ -228,6 +228,7 @@ LIBS += drivers/bios_emulator/libatibiosemu.a LIBS += drivers/block/libblock.a LIBS += drivers/dma/libdma.a LIBS += drivers/fpga/libfpga.a +LIBS += drivers/gpio/libgpio.a LIBS += drivers/hwmon/libhwmon.a LIBS += drivers/i2c/libi2c.a LIBS += drivers/input/libinput.a @@ -347,7 +348,7 @@ $(obj)u-boot: depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(OBJS): depend $(obj)include/autoconf.mk $(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@)) -$(LIBS): depend $(obj)include/autoconf.mk +$(LIBS): depend $(obj)include/autoconf.mk $(SUBDIRS) $(MAKE) -C $(dir $(subst $(obj),,$@)) $(LIBBOARD): depend $(LIBS) $(obj)include/autoconf.mk @@ -407,6 +408,7 @@ TAG_SUBDIRS += disk TAG_SUBDIRS += common TAG_SUBDIRS += drivers/bios_emulator TAG_SUBDIRS += drivers/block +TAG_SUBDIRS += drivers/gpio TAG_SUBDIRS += drivers/hwmon TAG_SUBDIRS += drivers/i2c TAG_SUBDIRS += drivers/input @@ -2461,6 +2463,12 @@ TQM8560_config: unconfig echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h; @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc +XPEDITE5200_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5200 xes + +XPEDITE5370_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5370 xes + ######################################################################### ## MPC86xx Systems ######################################################################### @@ -2594,6 +2602,7 @@ at91sam9260ek_nandflash_config \ at91sam9260ek_dataflash_cs0_config \ at91sam9260ek_dataflash_cs1_config \ at91sam9260ek_config : unconfig + @mkdir -p $(obj)include @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in NAND FLASH" ; \ @@ -2606,10 +2615,28 @@ at91sam9260ek_config : unconfig fi; @$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91 +at91sam9xeek_nandflash_config \ +at91sam9xeek_dataflash_cs0_config \ +at91sam9xeek_dataflash_cs1_config \ +at91sam9xeek_config : unconfig + @mkdir -p $(obj)include + @if [ "$(findstring _nandflash,$@)" ] ; then \ + echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in NAND FLASH" ; \ + elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ + echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ + else \ + echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \ + fi; + @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91sam9 + at91sam9261ek_nandflash_config \ at91sam9261ek_dataflash_cs0_config \ at91sam9261ek_dataflash_cs3_config \ at91sam9261ek_config : unconfig + @mkdir -p $(obj)include @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in NAND FLASH" ; \ @@ -2626,6 +2653,7 @@ at91sam9263ek_nandflash_config \ at91sam9263ek_dataflash_config \ at91sam9263ek_dataflash_cs0_config \ at91sam9263ek_config : unconfig + @mkdir -p $(obj)include @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in NAND FLASH" ; \ @@ -2639,6 +2667,7 @@ at91sam9rlek_nandflash_config \ at91sam9rlek_dataflash_config \ at91sam9rlek_dataflash_cs0_config \ at91sam9rlek_config : unconfig + @mkdir -p $(obj)include @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in NAND FLASH" ; \ @@ -3201,8 +3230,8 @@ mimc200_config : unconfig ## sh2 (Renesas SuperH) ######################################################################### rsk7203_config: unconfig - @ >include/config.h - @echo "#define CONFIG_RSK7203 1" >> include/config.h + @mkdir -p $(obj)include + @echo "#define CONFIG_RSK7203 1" > $(obj)/include/config.h @$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas ######################################################################### diff --git a/README b/README index 2a553c274c..132650ee53 100644 --- a/README +++ b/README @@ -621,6 +621,8 @@ The following options need to be configured: CONFIG_CMD_MII * MII utility commands CONFIG_CMD_NAND * NAND support CONFIG_CMD_NET bootp, tftpboot, rarpboot + CONFIG_CMD_PCA953X * PCA953x I2C gpio commands + CONFIG_CMD_PCA953X_INFO * PCA953x I2C gpio info command CONFIG_CMD_PCI * pciinfo CONFIG_CMD_PCMCIA * PCMCIA support CONFIG_CMD_PING * send ICMP ECHO_REQUEST to network @@ -698,6 +700,13 @@ The following options need to be configured: Note that if the RTC uses I2C, then the I2C interface must also be configured. See I2C Support, below. +- GPIO Support: + CONFIG_PCA953X - use NXP's PCA953X series I2C GPIO + CONFIG_PCA953X_INFO - enable pca953x info command + + Note that if the GPIO device uses I2C, then the I2C interface + must also be configured. See I2C Support, below. + - Timestamp Support: When CONFIG_TIMESTAMP is selected, the timestamp @@ -3731,7 +3740,7 @@ MPC826x processors), on others (parts of) the data cache can be locked as (mis-) used as memory, etc. Chris Hallinan posted a good summary of these issues to the - u-boot-users mailing list: + U-Boot mailing list: Subject: RE: [U-Boot-Users] RE: More On Memory Bank x (nothingness)? From: "Chris Hallinan" @@ -3941,7 +3950,7 @@ int main (int argc, char *argv[]) Download latest U-Boot source; - Subscribe to u-boot-users mailing list; + Subscribe to u-boot mailing list; if (clueless) { email ("Hi, I am new to U-Boot, how do I get started?"); @@ -4018,10 +4027,11 @@ Since the number of patches for U-Boot is growing, we need to establish some rules. Submissions which do not conform to these rules may be rejected, even when they contain important and valuable stuff. -Patches shall be sent to the u-boot-users mailing list. - Please see http://www.denx.de/wiki/U-Boot/Patches for details. +Patches shall be sent to the u-boot mailing list ; +see http://lists.denx.de/mailman/listinfo/u-boot + When you send a patch, please include the following information with it: @@ -4084,7 +4094,7 @@ Notes: disabled must not need more memory than the old code without your modification. -* Remember that there is a size limit of 40 kB per message on the - u-boot-users mailing list. Bigger patches will be moderated. If - they are reasonable and not bigger than 100 kB, they will be - acknowledged. Even bigger patches should be avoided. +* Remember that there is a size limit of 100 kB per message on the + u-boot mailing list. Bigger patches will be moderated. If they are + reasonable and not too big, they will be acknowledged. But patches + bigger than the size limit should be avoided. diff --git a/board/bf533-ezkit/Makefile b/board/bf533-ezkit/Makefile index b2d7acffee..6a45b7cb27 100644 --- a/board/bf533-ezkit/Makefile +++ b/board/bf533-ezkit/Makefile @@ -35,12 +35,11 @@ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(obj).depend $(OBJS) $(SOBJS) u-boot.lds +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) -u-boot.lds: u-boot.lds.S - $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P -Ubfin $^ > $@.tmp - mv -f $@.tmp $@ +$(obj)u-boot.lds: u-boot.lds.S + $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@ clean: rm -f $(SOBJS) $(OBJS) diff --git a/board/bf533-ezkit/config.mk b/board/bf533-ezkit/config.mk index de80ffe7b4..c8b9fb8c15 100644 --- a/board/bf533-ezkit/config.mk +++ b/board/bf533-ezkit/config.mk @@ -1,4 +1,6 @@ # +# Copyright (c) 2005-2008 Analog Device Inc. +# # (C) Copyright 2001 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # @@ -23,3 +25,9 @@ # This is not actually used for Blackfin boards so do not change it #TEXT_BASE = do-not-use-me + +LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds + +# Set some default LDR flags based on boot mode. +LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 +LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/bf533-ezkit/u-boot.lds.S b/board/bf533-ezkit/u-boot.lds.S index 70764acf1a..da16726d86 100644 --- a/board/bf533-ezkit/u-boot.lds.S +++ b/board/bf533-ezkit/u-boot.lds.S @@ -28,6 +28,8 @@ #include #include #undef ALIGN +#undef ENTRY +#undef bfin /* If we don't actually load anything into L1 data, this will avoid * a syntax error. If we do actually load something into L1 data, @@ -50,11 +52,12 @@ MEMORY l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE } +ENTRY(_start) SECTIONS { .text : { - cpu/blackfin/start.o (.text) + cpu/blackfin/start.o (.text .text.*) #ifdef ENV_IS_EMBEDDED /* WARNING - the following is hand-optimized to fit within @@ -63,20 +66,20 @@ SECTIONS * it linked after the configuration sector. */ - cpu/blackfin/traps.o (.text) - cpu/blackfin/interrupt.o (.text) - cpu/blackfin/serial.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_generic/zlib.o (.text) - board/bf533-ezkit/bf533-ezkit.o (.text) + cpu/blackfin/traps.o (.text .text.*) + cpu/blackfin/interrupt.o (.text .text.*) + cpu/blackfin/serial.o (.text .text.*) + common/dlmalloc.o (.text .text.*) + lib_generic/crc32.o (.text .text.*) + lib_generic/zlib.o (.text .text.*) + board/bf533-ezkit/bf533-ezkit.o (.text .text.*) . = DEFINED(env_offset) ? env_offset : .; - common/env_embedded.o (.text) + common/env_embedded.o (.text .text.*) #endif __initcode_start = .; - cpu/blackfin/initcode.o (.text) + cpu/blackfin/initcode.o (.text .text.*) __initcode_end = .; *(.text .text.*) diff --git a/board/bf533-stamp/Makefile b/board/bf533-stamp/Makefile index 21f6ad1b45..5ae022885e 100644 --- a/board/bf533-stamp/Makefile +++ b/board/bf533-stamp/Makefile @@ -35,12 +35,11 @@ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(obj).depend $(OBJS) $(SOBJS) u-boot.lds +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) -u-boot.lds: u-boot.lds.S - $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P -Ubfin $^ > $@.tmp - mv -f $@.tmp $@ +$(obj)u-boot.lds: u-boot.lds.S + $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@ clean: rm -f $(SOBJS) $(OBJS) diff --git a/board/bf533-stamp/config.mk b/board/bf533-stamp/config.mk index de80ffe7b4..c8b9fb8c15 100644 --- a/board/bf533-stamp/config.mk +++ b/board/bf533-stamp/config.mk @@ -1,4 +1,6 @@ # +# Copyright (c) 2005-2008 Analog Device Inc. +# # (C) Copyright 2001 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # @@ -23,3 +25,9 @@ # This is not actually used for Blackfin boards so do not change it #TEXT_BASE = do-not-use-me + +LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds + +# Set some default LDR flags based on boot mode. +LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 +LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/bf533-stamp/u-boot.lds.S b/board/bf533-stamp/u-boot.lds.S index 187309f3fc..76daa75c0d 100644 --- a/board/bf533-stamp/u-boot.lds.S +++ b/board/bf533-stamp/u-boot.lds.S @@ -28,6 +28,8 @@ #include #include #undef ALIGN +#undef ENTRY +#undef bfin /* If we don't actually load anything into L1 data, this will avoid * a syntax error. If we do actually load something into L1 data, @@ -50,11 +52,12 @@ MEMORY l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE } +ENTRY(_start) SECTIONS { .text : { - cpu/blackfin/start.o (.text) + cpu/blackfin/start.o (.text .text.*) #ifdef ENV_IS_EMBEDDED /* WARNING - the following is hand-optimized to fit within @@ -63,18 +66,18 @@ SECTIONS * it linked after the configuration sector. */ - cpu/blackfin/traps.o (.text) - cpu/blackfin/interrupt.o (.text) - cpu/blackfin/serial.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) + cpu/blackfin/traps.o (.text .text.*) + cpu/blackfin/interrupt.o (.text .text.*) + cpu/blackfin/serial.o (.text .text.*) + common/dlmalloc.o (.text .text.*) + lib_generic/crc32.o (.text .text.*) . = DEFINED(env_offset) ? env_offset : .; - common/env_embedded.o (.text) + common/env_embedded.o (.text .text.*) #endif __initcode_start = .; - cpu/blackfin/initcode.o (.text) + cpu/blackfin/initcode.o (.text .text.*) __initcode_end = .; *(.text .text.*) diff --git a/board/bf537-stamp/Makefile b/board/bf537-stamp/Makefile index e5481bfc55..e5ef9af5c5 100644 --- a/board/bf537-stamp/Makefile +++ b/board/bf537-stamp/Makefile @@ -35,12 +35,11 @@ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(obj).depend $(OBJS) $(SOBJS) u-boot.lds +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) -u-boot.lds: u-boot.lds.S - $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P -Ubfin $^ > $@.tmp - mv -f $@.tmp $@ +$(obj)u-boot.lds: u-boot.lds.S + $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@ clean: rm -f $(SOBJS) $(OBJS) diff --git a/board/bf537-stamp/config.mk b/board/bf537-stamp/config.mk index 1b87d53dd6..719b97e254 100644 --- a/board/bf537-stamp/config.mk +++ b/board/bf537-stamp/config.mk @@ -1,4 +1,6 @@ # +# Copyright (c) 2005-2008 Analog Device Inc. +# # (C) Copyright 2001 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # @@ -24,6 +26,9 @@ # This is not actually used for Blackfin boards so do not change it #TEXT_BASE = do-not-use-me +LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds + # Set some default LDR flags based on boot mode. -LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6 +LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 +LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6 LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/bf537-stamp/nand.c b/board/bf537-stamp/nand.c index c597f2db1e..20a7d0ef4c 100644 --- a/board/bf537-stamp/nand.c +++ b/board/bf537-stamp/nand.c @@ -87,7 +87,7 @@ int bfin_device_ready(struct mtd_info *mtd) * Members with a "?" were not set in the merged testing-NAND branch, * so they are not set here either. */ -void board_nand_init(struct nand_chip *nand) +int board_nand_init(struct nand_chip *nand) { *PORT(CONFIG_NAND_GPIO_PORT, _FER) &= ~BFIN_NAND_READY; *PORT(CONFIG_NAND_GPIO_PORT, IO_DIR) &= ~BFIN_NAND_READY; @@ -97,5 +97,7 @@ void board_nand_init(struct nand_chip *nand) nand->ecc.mode = NAND_ECC_SOFT; nand->dev_ready = bfin_device_ready; nand->chip_delay = 30; + + return 0; } #endif diff --git a/board/bf537-stamp/u-boot.lds.S b/board/bf537-stamp/u-boot.lds.S index 187309f3fc..76daa75c0d 100644 --- a/board/bf537-stamp/u-boot.lds.S +++ b/board/bf537-stamp/u-boot.lds.S @@ -28,6 +28,8 @@ #include #include #undef ALIGN +#undef ENTRY +#undef bfin /* If we don't actually load anything into L1 data, this will avoid * a syntax error. If we do actually load something into L1 data, @@ -50,11 +52,12 @@ MEMORY l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE } +ENTRY(_start) SECTIONS { .text : { - cpu/blackfin/start.o (.text) + cpu/blackfin/start.o (.text .text.*) #ifdef ENV_IS_EMBEDDED /* WARNING - the following is hand-optimized to fit within @@ -63,18 +66,18 @@ SECTIONS * it linked after the configuration sector. */ - cpu/blackfin/traps.o (.text) - cpu/blackfin/interrupt.o (.text) - cpu/blackfin/serial.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) + cpu/blackfin/traps.o (.text .text.*) + cpu/blackfin/interrupt.o (.text .text.*) + cpu/blackfin/serial.o (.text .text.*) + common/dlmalloc.o (.text .text.*) + lib_generic/crc32.o (.text .text.*) . = DEFINED(env_offset) ? env_offset : .; - common/env_embedded.o (.text) + common/env_embedded.o (.text .text.*) #endif __initcode_start = .; - cpu/blackfin/initcode.o (.text) + cpu/blackfin/initcode.o (.text .text.*) __initcode_end = .; *(.text .text.*) diff --git a/board/bf561-ezkit/Makefile b/board/bf561-ezkit/Makefile index a1a4433fc1..e7ee243569 100644 --- a/board/bf561-ezkit/Makefile +++ b/board/bf561-ezkit/Makefile @@ -35,12 +35,11 @@ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(obj).depend $(OBJS) $(SOBJS) u-boot.lds +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) -u-boot.lds: u-boot.lds.S - $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P -Ubfin $^ > $@.tmp - mv -f $@.tmp $@ +$(obj)u-boot.lds: u-boot.lds.S + $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@ clean: rm -f $(SOBJS) $(OBJS) diff --git a/board/bf561-ezkit/config.mk b/board/bf561-ezkit/config.mk index de80ffe7b4..710809a9e3 100644 --- a/board/bf561-ezkit/config.mk +++ b/board/bf561-ezkit/config.mk @@ -1,4 +1,6 @@ # +# Copyright (c) 2005-2008 Analog Device Inc. +# # (C) Copyright 2001 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # @@ -23,3 +25,9 @@ # This is not actually used for Blackfin boards so do not change it #TEXT_BASE = do-not-use-me + +LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds + +# Set some default LDR flags based on boot mode. +LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 +LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/bf561-ezkit/u-boot.lds.S b/board/bf561-ezkit/u-boot.lds.S index 99d6be634f..3d0453e2f2 100644 --- a/board/bf561-ezkit/u-boot.lds.S +++ b/board/bf561-ezkit/u-boot.lds.S @@ -28,6 +28,8 @@ #include #include #undef ALIGN +#undef ENTRY +#undef bfin /* If we don't actually load anything into L1 data, this will avoid * a syntax error. If we do actually load something into L1 data, @@ -50,11 +52,12 @@ MEMORY l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE } +ENTRY(_start) SECTIONS { .text : { - cpu/blackfin/start.o (.text) + cpu/blackfin/start.o (.text .text.*) #ifdef ENV_IS_EMBEDDED /* WARNING - the following is hand-optimized to fit within @@ -63,20 +66,20 @@ SECTIONS * it linked after the configuration sector. */ - cpu/blackfin/traps.o (.text) - cpu/blackfin/interrupt.o (.text) - cpu/blackfin/serial.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_generic/zlib.o (.text) - board/bf561-ezkit/bf561-ezkit.o (.text) + cpu/blackfin/traps.o (.text .text.*) + cpu/blackfin/interrupt.o (.text .text.*) + cpu/blackfin/serial.o (.text .text.*) + common/dlmalloc.o (.text .text.*) + lib_generic/crc32.o (.text .text.*) + lib_generic/zlib.o (.text .text.*) + board/bf561-ezkit/bf561-ezkit.o (.text .text.*) . = DEFINED(env_offset) ? env_offset : .; - common/env_embedded.o (.text) + common/env_embedded.o (.text .text.*) #endif __initcode_start = .; - cpu/blackfin/initcode.o (.text) + cpu/blackfin/initcode.o (.text .text.*) __initcode_end = .; *(.text .text.*) diff --git a/board/esd/cpci405/Makefile b/board/esd/cpci405/Makefile index 3867bd809c..7516c2280e 100644 --- a/board/esd/cpci405/Makefile +++ b/board/esd/cpci405/Makefile @@ -29,6 +29,7 @@ endif LIB = $(obj)lib$(BOARD).a COBJS = $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o +COBJS += ../common/cmd_loadpci.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c index c5ccb348a7..bd569a6297 100644 --- a/board/esd/cpci405/cpci405.c +++ b/board/esd/cpci405/cpci405.c @@ -20,8 +20,9 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ - #include +#include +#include #include #include #include @@ -31,16 +32,16 @@ DECLARE_GLOBAL_DATA_PTR; -extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); /*cmd_boot.c*/ -#if 0 -#define FPGA_DEBUG -#endif +extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); +extern void __ft_board_setup(void *blob, bd_t *bd); + +#undef FPGA_DEBUG /* fpga configuration data - generated by bin2cc */ const unsigned char fpgadata[] = { -#ifdef CONFIG_CPCI405_VER2 -# ifdef CONFIG_CPCI405AB +#if defined(CONFIG_CPCI405_VER2) +# if defined(CONFIG_CPCI405AB) # include "fpgadata_cpci405ab.c" # else # include "fpgadata_cpci4052.c" @@ -56,7 +57,7 @@ const unsigned char fpgadata[] = #include "../common/fpga.c" #include "../common/auto_update.h" -#ifdef CONFIG_CPCI405AB +#if defined(CONFIG_CPCI405AB) au_image_t au_image[] = { {"cpci405ab/preinst.img", 0, -1, AU_SCRIPT}, {"cpci405ab/pImage", 0xffc00000, 0x000c0000, AU_NOR}, @@ -65,7 +66,7 @@ au_image_t au_image[] = { {"cpci405ab/postinst.img", 0, 0, AU_SCRIPT}, }; #else -#ifdef CONFIG_CPCI405_VER2 +#if defined(CONFIG_CPCI405_VER2) au_image_t au_image[] = { {"cpci4052/preinst.img", 0, -1, AU_SCRIPT}, {"cpci4052/pImage", 0xffc00000, 0x000c0000, AU_NOR}, @@ -91,7 +92,7 @@ int cpci405_version(void); int gunzip(void *, int, unsigned char *, unsigned long *); void lxt971_no_sleep(void); -int board_early_init_f (void) +int board_early_init_f(void) { #ifndef CONFIG_CPCI405_VER2 int index, len, i; @@ -100,18 +101,19 @@ int board_early_init_f (void) #ifdef FPGA_DEBUG /* set up serial port with default baudrate */ - (void) get_clocks (); + (void)get_clocks(); gd->baudrate = CONFIG_BAUDRATE; - serial_init (); + serial_init(); console_init_f(); #endif /* - * First pull fpga-prg pin low, to disable fpga logic (on version 2 board) + * First pull fpga-prg pin low, + * to disable fpga logic (on version 2 board) */ out32(GPIO0_ODR, 0x00000000); /* no open drain pins */ - out32(GPIO0_TCR, CONFIG_SYS_FPGA_PRG); /* setup for output */ - out32(GPIO0_OR, CONFIG_SYS_FPGA_PRG); /* set output pins to high */ + out32(GPIO0_TCR, CONFIG_SYS_FPGA_PRG); /* setup for output */ + out32(GPIO0_OR, CONFIG_SYS_FPGA_PRG); /* set output pins to high */ out32(GPIO0_OR, 0); /* pull prg low */ /* @@ -124,39 +126,42 @@ int board_early_init_f (void) /* booting FPGA failed */ #ifndef FPGA_DEBUG /* set up serial port with default baudrate */ - (void) get_clocks (); + (void)get_clocks(); gd->baudrate = CONFIG_BAUDRATE; - serial_init (); + serial_init(); console_init_f(); #endif printf("\nFPGA: Booting failed "); switch (status) { case ERROR_FPGA_PRG_INIT_LOW: - printf("(Timeout: INIT not low after asserting PROGRAM*)\n "); + printf("(Timeout: INIT not low after " + "asserting PROGRAM*)\n "); break; case ERROR_FPGA_PRG_INIT_HIGH: - printf("(Timeout: INIT not high after deasserting PROGRAM*)\n "); + printf("(Timeout: INIT not high after " + "deasserting PROGRAM*)\n "); break; case ERROR_FPGA_PRG_DONE: - printf("(Timeout: DONE not high after programming FPGA)\n "); + printf("(Timeout: DONE not high after " + "programming FPGA)\n "); break; } /* display infos on fpgaimage */ index = 15; - for (i=0; i<4; i++) { + for (i = 0; i < 4; i++) { len = fpgadata[index]; - printf("FPGA: %s\n", &(fpgadata[index+1])); - index += len+3; + printf("FPGA: %s\n", &(fpgadata[index + 1])); + index += len + 3; } - putc ('\n'); + putc('\n'); /* delayed reboot */ - for (i=20; i>0; i--) { + for (i = 20; i > 0; i--) { printf("Rebooting in %2d seconds \r",i); - for (index=0;index<1000;index++) + for (index = 0; index < 1000; index++) udelay(1000); } - putc ('\n'); + putc('\n'); do_reset(NULL, 0, 0, NULL); } } @@ -167,7 +172,7 @@ int board_early_init_f (void) * IRQ 16 405GP internally generated; active low; level sensitive * IRQ 17-24 RESERVED * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive - * IRQ 26 (EXT IRQ 1) CAN1 (+FPGA on CPCI4052) ; active low; level sensitive + * IRQ 26 (EXT IRQ 1) CAN1 (+FPGA on CPCI4052); active low; level sens. * IRQ 27 (EXT IRQ 2) PCI SLOT 0; active low; level sensitive * IRQ 28 (EXT IRQ 3) PCI SLOT 1; active low; level sensitive * IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive @@ -177,7 +182,7 @@ int board_early_init_f (void) mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ mtdcr(uicer, 0x00000000); /* disable all ints */ mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ -#ifdef CONFIG_CPCI405_6U +#if defined(CONFIG_CPCI405_6U) if (cpci405_version() == 3) { mtdcr(uicpr, 0xFFFFFF99); /* set int polarities */ } else { @@ -187,21 +192,20 @@ int board_early_init_f (void) mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */ #endif mtdcr(uictr, 0x10000000); /* set int trigger levels */ - mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/ + mtdcr(uicvcr, 0x00000001); /* set vect base=0, + * INT0 highest priority */ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ return 0; } -/* ------------------------------------------------------------------------- */ - int ctermm2(void) { -#ifdef CONFIG_CPCI405_VER2 +#if defined(CONFIG_CPCI405_VER2) return 0; /* no, board is cpci405 */ #else - if ((*(unsigned char *)0xf0000400 == 0x00) && - (*(unsigned char *)0xf0000401 == 0x01)) + if ((in_8((void*)0xf0000400) == 0x00) && + (in_8((void*)0xf0000401) == 0x01)) return 0; /* no, board is cpci405 */ else return -1; /* yes, board is cterm-m2 */ @@ -228,8 +232,8 @@ int cpci405_version(void) mtdcr(cntrl0, cntrl0Reg | 0x03000000); out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x00180000); out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x00180000); - udelay(1000); /* wait some time before reading input */ - value = in_be32((void*)GPIO0_IR) & 0x00180000; /* get config bits */ + udelay(1000); /* wait some time before reading input */ + value = in_be32((void*)GPIO0_IR) & 0x00180000; /* get config bits */ /* * Restore GPIO settings @@ -263,7 +267,7 @@ int misc_init_r (void) gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; gd->bd->bi_flashoffset = 0; -#ifdef CONFIG_CPCI405_VER2 +#if defined(CONFIG_CPCI405_VER2) { unsigned char *dst; ulong len = sizeof(fpgadata); @@ -283,9 +287,10 @@ int misc_init_r (void) mtdcr(cntrl0, cntrl0Reg | 0x00300000); dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE); - if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) { - printf ("GUNZIP ERROR - must RESET board to recover\n"); - do_reset (NULL, 0, 0, NULL); + if (gunzip(dst, CONFIG_SYS_FPGA_MAX_SIZE, + (uchar *)fpgadata, &len) != 0) { + printf("GUNZIP ERROR - must RESET board to recover\n"); + do_reset(NULL, 0, 0, NULL); } status = fpga_boot(dst, len); @@ -293,31 +298,34 @@ int misc_init_r (void) printf("\nFPGA: Booting failed "); switch (status) { case ERROR_FPGA_PRG_INIT_LOW: - printf("(Timeout: INIT not low after asserting PROGRAM*)\n "); + printf("(Timeout: INIT not low after " + "asserting PROGRAM*)\n "); break; case ERROR_FPGA_PRG_INIT_HIGH: - printf("(Timeout: INIT not high after deasserting PROGRAM*)\n "); + printf("(Timeout: INIT not high after " + "deasserting PROGRAM*)\n "); break; case ERROR_FPGA_PRG_DONE: - printf("(Timeout: DONE not high after programming FPGA)\n "); + printf("(Timeout: DONE not high after " + "programming FPGA)\n "); break; } /* display infos on fpgaimage */ index = 15; - for (i=0; i<4; i++) { + for (i = 0; i < 4; i++) { len = dst[index]; - printf("FPGA: %s\n", &(dst[index+1])); - index += len+3; + printf("FPGA: %s\n", &(dst[index + 1])); + index += len + 3; } - putc ('\n'); + putc('\n'); /* delayed reboot */ - for (i=20; i>0; i--) { - printf("Rebooting in %2d seconds \r",i); - for (index=0;index<1000;index++) + for (i = 20; i > 0; i--) { + printf("Rebooting in %2d seconds \r", i); + for (index = 0; index < 1000; index++) udelay(1000); } - putc ('\n'); + putc('\n'); do_reset(NULL, 0, 0, NULL); } @@ -328,12 +336,12 @@ int misc_init_r (void) /* display infos on fpgaimage */ index = 15; - for (i=0; i<4; i++) { + for (i = 0; i < 4; i++) { len = dst[index]; - printf("%s ", &(dst[index+1])); - index += len+3; + printf("%s ", &(dst[index + 1])); + index += len + 3; } - putc ('\n'); + putc('\n'); free(dst); @@ -345,68 +353,48 @@ int misc_init_r (void) SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA); udelay(1000); /* wait 1ms */ -#ifdef CONFIG_CPCI405_6U +#if defined(CONFIG_CPCI405_6U) +#error HIER GETH ES WEITER MIT IO ACCESSORS if (cpci405_version() == 3) { - volatile unsigned short *fpga_mode = (unsigned short *)CONFIG_SYS_FPGA_BASE_ADDR; - volatile unsigned char *leds = (unsigned char *)CONFIG_SYS_LED_ADDR; - /* * Enable outputs in fpga on version 3 board */ - *fpga_mode |= CONFIG_SYS_FPGA_MODE_ENABLE_OUTPUT; + out_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR, + in_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR) | + CONFIG_SYS_FPGA_MODE_ENABLE_OUTPUT); /* * Set outputs to 0 */ - *leds = 0x00; + out_8((void*)CONFIG_SYS_LED_ADDR, 0x00); /* * Reset external DUART */ - *fpga_mode |= CONFIG_SYS_FPGA_MODE_DUART_RESET; + out_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR, + in_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR) | + CONFIG_SYS_FPGA_MODE_DUART_RESET); udelay(100); - *fpga_mode &= ~(CONFIG_SYS_FPGA_MODE_DUART_RESET); + out_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR, + in_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR) & + ~CONFIG_SYS_FPGA_MODE_DUART_RESET); } #endif } else { puts("\n*** U-Boot Version does not match Board Version!\n"); puts("*** CPCI-405 Version 1.x detected!\n"); - puts("*** Please use correct U-Boot version (CPCI405 instead of CPCI4052)!\n\n"); + puts("*** Please use correct U-Boot version " + "(CPCI405 instead of CPCI4052)!\n\n"); } } - #else /* CONFIG_CPCI405_VER2 */ - -#if 0 /* test-only: code-plug now not relavant for ip-address any more */ - /* - * Generate last byte of ip-addr from code-plug @ 0xf0000400 - */ - if (ctermm2()) { - char str[32]; - unsigned char ipbyte = *(unsigned char *)0xf0000400; - - /* - * Only overwrite ip-addr with allowed values - */ - if ((ipbyte != 0x00) && (ipbyte != 0xff)) { - bd->bi_ip_addr = (bd->bi_ip_addr & 0xffffff00) | ipbyte; - sprintf(str, "%ld.%ld.%ld.%ld", - (bd->bi_ip_addr & 0xff000000) >> 24, - (bd->bi_ip_addr & 0x00ff0000) >> 16, - (bd->bi_ip_addr & 0x0000ff00) >> 8, - (bd->bi_ip_addr & 0x000000ff)); - setenv("ipaddr", str); - } - } -#endif - if (cpci405_version() >= 2) { puts("\n*** U-Boot Version does not match Board Version!\n"); puts("*** CPCI-405 Board Version 2.x detected!\n"); - puts("*** Please use correct U-Boot version (CPCI4052 instead of CPCI405)!\n\n"); + puts("*** Please use correct U-Boot version " + "(CPCI4052 instead of CPCI405)!\n\n"); } - #endif /* CONFIG_CPCI405_VER2 */ /* @@ -415,46 +403,33 @@ int misc_init_r (void) cntrl0Reg = mfdcr(cntrl0); mtdcr(cntrl0, cntrl0Reg | 0x00001000); - return (0); + return 0; } /* * Check Board Identity: */ -int checkboard (void) +int checkboard(void) { #ifndef CONFIG_CPCI405_VER2 int index; int len; #endif char str[64]; - int i = getenv_r ("serial#", str, sizeof(str)); + int i = getenv_r("serial#", str, sizeof(str)); unsigned short ver; - puts ("Board: "); + puts("Board: "); - if (i == -1) { - puts ("### No HW ID - assuming CPCI405"); - } else { + if (i == -1) + puts("### No HW ID - assuming CPCI405"); + else puts(str); - } ver = cpci405_version(); printf(" (Ver %d.x, ", ver); -#if 0 /* test-only */ - if (ver >= 2) { - volatile u16 *fpga_status = (u16 *)CONFIG_SYS_FPGA_BASE_ADDR + 1; - - if (*fpga_status & CONFIG_SYS_FPGA_STATUS_FLASH) { - puts ("FLASH Bank B, "); - } else { - puts ("FLASH Bank A, "); - } - } -#endif - if (ctermm2()) { char str[4]; @@ -465,32 +440,31 @@ int checkboard (void) setenv("boardid", str); printf("CTERM-M2 - Id=%s)", str); } else { - if (cpci405_host()) { - puts ("PCI Host Version)"); - } else { - puts ("PCI Adapter Version)"); - } + if (cpci405_host()) + puts("PCI Host Version)"); + else + puts("PCI Adapter Version)"); } #ifndef CONFIG_CPCI405_VER2 - puts ("\nFPGA: "); + puts("\nFPGA: "); /* display infos on fpgaimage */ index = 15; - for (i=0; i<4; i++) { + for (i = 0; i < 4; i++) { len = fpgadata[index]; - printf("%s ", &(fpgadata[index+1])); - index += len+3; + printf("%s ", &(fpgadata[index + 1])); + index += len + 3; } #endif - putc ('\n'); + putc('\n'); return 0; } void reset_phy(void) { -#ifdef CONFIG_LXT971_NO_SLEEP +#if defined(CONFIG_LXT971_NO_SLEEP) /* * Disable sleep mode in LXT971 @@ -499,25 +473,24 @@ void reset_phy(void) #endif } -#ifdef CONFIG_CPCI405_VER2 -#ifdef CONFIG_IDE_RESET - +#if defined(CONFIG_CPCI405_VER2) && defined (CONFIG_IDE_RESET) void ide_set_reset(int on) { - volatile unsigned short *fpga_mode = (unsigned short *)CONFIG_SYS_FPGA_BASE_ADDR; - /* * Assert or deassert CompactFlash Reset Pin */ - if (on) { /* assert RESET */ - *fpga_mode &= ~(CONFIG_SYS_FPGA_MODE_CF_RESET); - } else { /* release RESET */ - *fpga_mode |= CONFIG_SYS_FPGA_MODE_CF_RESET; + if (on) { /* assert RESET */ + out_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR, + in_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR) & + ~CONFIG_SYS_FPGA_MODE_CF_RESET); + } else { /* release RESET */ + out_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR, + in_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR) | + CONFIG_SYS_FPGA_MODE_CF_RESET); } } -#endif /* CONFIG_IDE_RESET */ -#endif /* CONFIG_CPCI405_VER2 */ +#endif /* CONFIG_IDE_RESET && CONFIG_CPCI405_VER2 */ #if defined(CONFIG_PCI) void cpci405_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev) @@ -552,15 +525,44 @@ int pci_pre_init(struct pci_controller *hose) } #endif /* defined(CONFIG_PCI) */ +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ + int rc; + + __ft_board_setup(blob, bd); + + /* + * Disable PCI in adapter mode. + */ + if (!cpci405_host()) { + rc = fdt_find_and_setprop(blob, "/plb/pci@ec000000", "status", + "disabled", sizeof("disabled"), 1); + if (rc) { + printf("Unable to update property status in PCI node, " + "err=%s\n", + fdt_strerror(rc)); + } + } +} +#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ + +#if defined(CONFIG_CPCI405AB) +#define ONE_WIRE_CLEAR out_be16((void*)(CONFIG_SYS_FPGA_BASE_ADDR + \ + CONFIG_SYS_FPGA_MODE), \ + in_be16((void*)(CONFIG_SYS_FPGA_BASE_ADDR + \ + CONFIG_SYS_FPGA_MODE)) | \ + CONFIG_SYS_FPGA_MODE_1WIRE_DIR) -#ifdef CONFIG_CPCI405AB +#define ONE_WIRE_SET out_be16((void*)(CONFIG_SYS_FPGA_BASE_ADDR + \ + CONFIG_SYS_FPGA_MODE), \ + in_be16((void*)(CONFIG_SYS_FPGA_BASE_ADDR + \ + CONFIG_SYS_FPGA_MODE)) & \ + ~CONFIG_SYS_FPGA_MODE_1WIRE_DIR) -#define ONE_WIRE_CLEAR (*(volatile unsigned short *)(CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_MODE) \ - |= CONFIG_SYS_FPGA_MODE_1WIRE_DIR) -#define ONE_WIRE_SET (*(volatile unsigned short *)(CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_MODE) \ - &= ~CONFIG_SYS_FPGA_MODE_1WIRE_DIR) -#define ONE_WIRE_GET (*(volatile unsigned short *)(CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_STATUS) \ - & CONFIG_SYS_FPGA_MODE_1WIRE) +#define ONE_WIRE_GET (in_be16((void*)(CONFIG_SYS_FPGA_BASE_ADDR + \ + CONFIG_SYS_FPGA_STATUS)) & \ + CONFIG_SYS_FPGA_MODE_1WIRE) /* * Generate a 1-wire reset, return 1 if no presence detect was found, @@ -630,7 +632,7 @@ void OWWriteByte(int data) { int loop; - for (loop=0; loop<8; loop++) { + for (loop = 0; loop < 8; loop++) { OWWriteBit(data & 0x01); data >>= 1; } @@ -640,11 +642,10 @@ int OWReadByte(void) { int loop, result = 0; - for (loop=0; loop<8; loop++) { + for (loop = 0; loop < 8; loop++) { result >>= 1; - if (OWReadBit()) { + if (OWReadBit()) result |= 0x80; - } } return result; @@ -652,7 +653,7 @@ int OWReadByte(void) int do_onewire(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { - volatile unsigned short val; + unsigned short val; int result; int i; unsigned char ow_id[6]; @@ -662,23 +663,25 @@ int do_onewire(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) /* * Clear 1-wire bit (open drain with pull-up) */ - val = *(volatile unsigned short *)0xf0400000; - val &= ~0x1000; /* clear 1-wire bit */ - *(volatile unsigned short *)0xf0400000 = val; + val = in_be16((void*)(CONFIG_SYS_FPGA_BASE_ADDR + + CONFIG_SYS_FPGA_MODE)); + val &= ~CONFIG_SYS_FPGA_MODE_1WIRE; /* clear 1-wire bit */ + out_be16((void*)(CONFIG_SYS_FPGA_BASE_ADDR + + CONFIG_SYS_FPGA_MODE), val); result = OWTouchReset(); - if (result != 0) { + if (result != 0) puts("No 1-wire device detected!\n"); - } OWWriteByte(0x33); /* send read rom command */ OWReadByte(); /* skip family code ( == 0x01) */ - for (i=0; i<6; i++) { + for (i = 0; i < 6; i++) ow_id[i] = OWReadByte(); - } ow_crc = OWReadByte(); /* read crc */ - sprintf(str, "%08X%04X", *(unsigned int *)&ow_id[0], *(unsigned short *)&ow_id[4]); + sprintf(str, "%08X%04X", + *(unsigned int *)&ow_id[0], + *(unsigned short *)&ow_id[4]); printf("Setting environment variable 'ow_id' to %s\n", str); setenv("ow_id", str); @@ -690,8 +693,8 @@ U_BOOT_CMD( NULL ); -#define CONFIG_SYS_I2C_EEPROM_ADDR_2 0x51 /* EEPROM CAT28WC32 */ -#define CONFIG_ENV_SIZE_2 0x800 /* 2048 bytes may be used for env vars*/ +#define CONFIG_SYS_I2C_EEPROM_ADDR_2 0x51 /* EEPROM CAT24WC32 */ +#define CONFIG_ENV_SIZE_2 0x800 /* 2048 bytes may be used for env vars */ /* * Write backplane ip-address... @@ -706,12 +709,14 @@ int do_get_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) IPaddr_t ipaddr; buf = malloc(CONFIG_ENV_SIZE_2); - if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR_2, 0, (uchar *)buf, CONFIG_ENV_SIZE_2)) { + if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR_2, 0, + (uchar *)buf, CONFIG_ENV_SIZE_2)) puts("\nError reading backplane EEPROM!\n"); - } else { - crc = crc32(0, (uchar *)(buf+4), CONFIG_ENV_SIZE_2-4); + else { + crc = crc32(0, (uchar *)(buf+4), CONFIG_ENV_SIZE_2 - 4); if (crc != *(ulong *)buf) { - printf("ERROR: crc mismatch %08lx %08lx\n", crc, *(ulong *)buf); + printf("ERROR: crc mismatch %08lx %08lx\n", + crc, *(ulong *)buf); return -1; } @@ -768,12 +773,12 @@ int do_set_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) memset(buf, 0, CONFIG_ENV_SIZE_2); sprintf(str, "bp_ip=%s", argv[1]); strcpy(buf+4, str); - crc = crc32(0, (uchar *)(buf+4), CONFIG_ENV_SIZE_2-4); + crc = crc32(0, (uchar *)(buf+4), CONFIG_ENV_SIZE_2 - 4); *(ulong *)buf = crc; - if (eeprom_write(CONFIG_SYS_I2C_EEPROM_ADDR_2, 0, (uchar *)buf, CONFIG_ENV_SIZE_2)) { + if (eeprom_write(CONFIG_SYS_I2C_EEPROM_ADDR_2, + 0, (uchar *)buf, CONFIG_ENV_SIZE_2)) puts("\nError writing backplane EEPROM!\n"); - } free(buf); diff --git a/board/esd/plu405/plu405.c b/board/esd/plu405/plu405.c index 61186a8d7c..85057a268f 100644 --- a/board/esd/plu405/plu405.c +++ b/board/esd/plu405/plu405.c @@ -104,6 +104,7 @@ int misc_init_r (void) unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4); unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4); unsigned char *dst; + unsigned char fctr; ulong len = sizeof(fpgadata); int status; int index; @@ -203,6 +204,15 @@ int misc_init_r (void) out_8(duart0_mcr, 0x08); out_8(duart1_mcr, 0x08); + /* + * Enable auto RS485 mode in 2nd external uart + */ + out_8((void *)DUART1_BA + 3, 0xbf); /* write LCR */ + fctr = in_8((void *)DUART1_BA + 1); /* read FCTR */ + fctr |= 0x08; /* enable RS485 mode */ + out_8((void *)DUART1_BA + 1, fctr); /* write FCTR */ + out_8((void *)DUART1_BA + 3, 0); /* write LCR */ + return (0); } diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c index a0b6fbd121..9e3f67768c 100644 --- a/board/freescale/mpc8540ads/mpc8540ads.c +++ b/board/freescale/mpc8540ads/mpc8540ads.c @@ -133,7 +133,7 @@ local_bus_init(void) */ get_sys_info(&sysinfo); - clkdiv = lbc->lcrr & 0x0f; + clkdiv = lbc->lcrr & LCRR_CLKDIV; lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; if (lbc_hz < 66) { diff --git a/board/freescale/mpc8541cds/mpc8541cds.c b/board/freescale/mpc8541cds/mpc8541cds.c index 7e40c5c80a..e6025c8a56 100644 --- a/board/freescale/mpc8541cds/mpc8541cds.c +++ b/board/freescale/mpc8541cds/mpc8541cds.c @@ -308,7 +308,7 @@ local_bus_init(void) */ get_sys_info(&sysinfo); - clkdiv = lbc->lcrr & 0x0f; + clkdiv = lbc->lcrr & LCRR_CLKDIV; lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; if (lbc_hz < 66) { diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c index 14581abdd8..977731289b 100644 --- a/board/freescale/mpc8544ds/mpc8544ds.c +++ b/board/freescale/mpc8544ds/mpc8544ds.c @@ -121,7 +121,7 @@ pci_init_board(void) volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR; struct pci_controller *hose = &pcie3_hose; int pcie_ep = (host_agent == 1); - int pcie_configured = io_sel >= 1; + int pcie_configured = io_sel >= 6; struct pci_region *r = hose->regions; if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ @@ -188,7 +188,7 @@ pci_init_board(void) volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; struct pci_controller *hose = &pcie1_hose; int pcie_ep = (host_agent == 5); - int pcie_configured = io_sel & 6; + int pcie_configured = io_sel >= 2; struct pci_region *r = hose->regions; if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ @@ -251,7 +251,7 @@ pci_init_board(void) volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR; struct pci_controller *hose = &pcie2_hose; int pcie_ep = (host_agent == 3); - int pcie_configured = io_sel & 4; + int pcie_configured = io_sel >= 4; struct pci_region *r = hose->regions; if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c index c562fc9d95..90e89bc719 100644 --- a/board/freescale/mpc8548cds/mpc8548cds.c +++ b/board/freescale/mpc8548cds/mpc8548cds.c @@ -125,7 +125,7 @@ local_bus_init(void) sys_info_t sysinfo; get_sys_info(&sysinfo); - clkdiv = (lbc->lcrr & 0x0f) * 2; + clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2; lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; gur->lbiuiplldcr1 = 0x00078080; diff --git a/board/freescale/mpc8555cds/mpc8555cds.c b/board/freescale/mpc8555cds/mpc8555cds.c index 33685c19f3..53d5a936af 100644 --- a/board/freescale/mpc8555cds/mpc8555cds.c +++ b/board/freescale/mpc8555cds/mpc8555cds.c @@ -308,7 +308,7 @@ local_bus_init(void) */ get_sys_info(&sysinfo); - clkdiv = lbc->lcrr & 0x0f; + clkdiv = lbc->lcrr & LCRR_CLKDIV; lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; if (lbc_hz < 66) { diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c index 37308189d2..ac7778e25c 100644 --- a/board/freescale/mpc8560ads/mpc8560ads.c +++ b/board/freescale/mpc8560ads/mpc8560ads.c @@ -337,7 +337,7 @@ local_bus_init(void) */ get_sys_info(&sysinfo); - clkdiv = lbc->lcrr & 0x0f; + clkdiv = lbc->lcrr & LCRR_CLKDIV; lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; if (lbc_hz < 66) { diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c index bc93be80fc..7a23b338a5 100644 --- a/board/freescale/mpc8568mds/mpc8568mds.c +++ b/board/freescale/mpc8568mds/mpc8568mds.c @@ -188,7 +188,7 @@ local_bus_init(void) sys_info_t sysinfo; get_sys_info(&sysinfo); - clkdiv = (lbc->lcrr & 0x0f) * 2; + clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2; lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; gur->lbiuiplldcr1 = 0x00078080; diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c index a14db5ad2c..c2487e5b84 100644 --- a/board/freescale/mpc8572ds/mpc8572ds.c +++ b/board/freescale/mpc8572ds/mpc8572ds.c @@ -166,11 +166,11 @@ void pci_init_board(void) struct pci_controller *hose = &pcie3_hose; int pcie_ep = (host_agent == 0) || (host_agent == 3) || (host_agent == 5) || (host_agent == 6); - int pcie_configured = io_sel >= 1; + int pcie_configured = (io_sel == 0x7); struct pci_region *r = hose->regions; u32 temp32; - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ + if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)){ printf ("\n PCIE3 connected to ULI as %s (base address %x)", pcie_ep ? "End Point" : "Root Complex", (uint)pci); @@ -234,10 +234,10 @@ void pci_init_board(void) struct pci_controller *hose = &pcie2_hose; int pcie_ep = (host_agent == 2) || (host_agent == 4) || (host_agent == 6) || (host_agent == 0); - int pcie_configured = io_sel & 4; + int pcie_configured = (io_sel == 0x3) || (io_sel == 0x7); struct pci_region *r = hose->regions; - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ + if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)){ printf ("\n PCIE2 connected to Slot 1 as %s (base address %x)", pcie_ep ? "End Point" : "Root Complex", (uint)pci); @@ -287,7 +287,9 @@ void pci_init_board(void) struct pci_controller *hose = &pcie1_hose; int pcie_ep = (host_agent <= 1) || (host_agent == 4) || (host_agent == 5); - int pcie_configured = io_sel & 6; + int pcie_configured = (io_sel == 0x2) || (io_sel == 0x3) || + (io_sel == 0x7) || (io_sel == 0xb) || + (io_sel == 0xc) || (io_sel == 0xf); struct pci_region *r = hose->regions; if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ diff --git a/board/freescale/mpc8572ds/tlb.c b/board/freescale/mpc8572ds/tlb.c index 8d1f646fac..829896ac06 100644 --- a/board/freescale/mpc8572ds/tlb.c +++ b/board/freescale/mpc8572ds/tlb.c @@ -41,10 +41,6 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, PIXIS_BASE, PIXIS_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 0, BOOKE_PAGESZ_4K, 0), - /* TLB 1 */ /* *I*** - Covers boot page */ SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, @@ -86,6 +82,9 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 7, BOOKE_PAGESZ_1M, 1), + SET_TLB_ENTRY(1, PIXIS_BASE, PIXIS_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 8, BOOKE_PAGESZ_4K, 1), }; int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/mpc8610hpcd/law.c b/board/freescale/mpc8610hpcd/law.c index 2aad28aee1..0fc8384847 100644 --- a/board/freescale/mpc8610hpcd/law.c +++ b/board/freescale/mpc8610hpcd/law.c @@ -31,8 +31,8 @@ struct law_entry law_table[] = { #if !defined(CONFIG_SPD_EEPROM) SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR_1), #endif - SET_LAW(CONFIG_SYS_PCIE1_MEM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_1), - SET_LAW(CONFIG_SYS_PCIE2_MEM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_2), + SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_1), + SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_2), SET_LAW(PIXIS_BASE, LAW_SIZE_2M, LAW_TRGT_IF_LBC), SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1), SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_2), diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd.c b/board/freescale/mpc8610hpcd/mpc8610hpcd.c index 2792778e32..a2097a5aff 100644 --- a/board/freescale/mpc8610hpcd/mpc8610hpcd.c +++ b/board/freescale/mpc8610hpcd/mpc8610hpcd.c @@ -266,14 +266,14 @@ void pci_init_board(void) /* outbound memory */ pci_set_region(r++, - CONFIG_SYS_PCIE1_MEM_BASE, + CONFIG_SYS_PCIE1_MEM_BUS, CONFIG_SYS_PCIE1_MEM_PHYS, CONFIG_SYS_PCIE1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ pci_set_region(r++, - CONFIG_SYS_PCIE1_IO_BASE, + CONFIG_SYS_PCIE1_IO_BUS, CONFIG_SYS_PCIE1_IO_PHYS, CONFIG_SYS_PCIE1_IO_SIZE, PCI_REGION_IO); @@ -321,14 +321,14 @@ void pci_init_board(void) /* outbound memory */ pci_set_region(r++, - CONFIG_SYS_PCIE2_MEM_BASE, + CONFIG_SYS_PCIE2_MEM_BUS, CONFIG_SYS_PCIE2_MEM_PHYS, CONFIG_SYS_PCIE2_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ pci_set_region(r++, - CONFIG_SYS_PCIE2_IO_BASE, + CONFIG_SYS_PCIE2_IO_BUS, CONFIG_SYS_PCIE2_IO_PHYS, CONFIG_SYS_PCIE2_IO_SIZE, PCI_REGION_IO); @@ -370,14 +370,14 @@ void pci_init_board(void) /* outbound memory */ pci_set_region(r++, - CONFIG_SYS_PCI1_MEM_BASE, + CONFIG_SYS_PCI1_MEM_BUS, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ pci_set_region(r++, - CONFIG_SYS_PCI1_IO_BASE, + CONFIG_SYS_PCI1_IO_BUS, CONFIG_SYS_PCI1_IO_PHYS, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO); diff --git a/board/m501sk/Makefile b/board/m501sk/Makefile index c562c600a4..aec3d1c7c0 100644 --- a/board/m501sk/Makefile +++ b/board/m501sk/Makefile @@ -27,8 +27,6 @@ LIB = $(obj)lib$(BOARD).a COBJS := m501sk.o eeprom.o -SOBJS := memsetup.o - SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) diff --git a/board/m501sk/memsetup.S b/board/m501sk/memsetup.S deleted file mode 100644 index 6aea723f91..0000000000 --- a/board/m501sk/memsetup.S +++ /dev/null @@ -1,200 +0,0 @@ -/* - * Memory Setup stuff - taken from blob memsetup.S - * - * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and - * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) - * - * Modified for the at91rm9200dk board by - * (C) Copyright 2004 - * Gary Jennejohn, DENX Software Engineering, - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include - -#ifdef CONFIG_BOOTBINFUNC -/* - * some parameters for the board - * - * This is based on rm9200dk.cfg for the BDI2000 from ABATRON which in - * turn is based on the boot.bin code from ATMEL - * - */ - -/* flash */ -#define MC_PUIA 0xFFFFFF10 -#define MC_PUIA_VAL 0x00000000 -#define MC_PUP 0xFFFFFF50 -#define MC_PUP_VAL 0x00000000 -#define MC_PUER 0xFFFFFF54 -#define MC_PUER_VAL 0x00000000 -#define MC_ASR 0xFFFFFF04 -#define MC_ASR_VAL 0x00000000 -#define MC_AASR 0xFFFFFF08 -#define MC_AASR_VAL 0x00000000 -#define EBI_CFGR 0xFFFFFF64 -#define EBI_CFGR_VAL 0x00000000 -#define SMC_CSR0 0xFFFFFF70 -#define SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ - -/* clocks */ -#define PLLAR 0xFFFFFC28 -#define PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */ -#define PLLBR 0xFFFFFC2C -#define PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */ -#define MCKR 0xFFFFFC30 -/* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */ -#define MCKR_VAL 0x00000202 - -/* sdram */ -#define PIOC_ASR 0xFFFFF870 -#define PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as Perip (D16/D31) */ -#define PIOC_BSR 0xFFFFF874 -#define PIOC_BSR_VAL 0x00000000 -#define PIOC_PDR 0xFFFFF804 -#define PIOC_PDR_VAL 0xFFFF0000 -#define EBI_CSA 0xFFFFFF60 -#define EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */ -#define SDRC_CR 0xFFFFFF98 -#define SDRC_CR_VAL 0x2188c155 /* set up the SDRAM */ -#define SDRAM 0x20000000 /* address of the SDRAM */ -#define SDRAM1 0x20000080 /* address of the SDRAM */ -#define SDRAM_VAL 0x00000000 /* value written to SDRAM */ -#define SDRC_MR 0xFFFFFF90 -#define SDRC_MR_VAL 0x00000002 /* Precharge All */ -#define SDRC_MR_VAL1 0x00000004 /* refresh */ -#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ -#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */ -#define SDRC_TR 0xFFFFFF94 -#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ - -_TEXT_BASE: - .word TEXT_BASE - -.globl lowlevelinit -lowlevelinit: - /* memory control configuration */ - /* this isn't very elegant, but what the heck */ - ldr r0, =SMRDATA - ldr r1, _TEXT_BASE - sub r0, r0, r1 - add r2, r0, #80 -0: - /* the address */ - ldr r1, [r0], #4 - /* the value */ - ldr r3, [r0], #4 - str r3, [r1] - cmp r2, r0 - bne 0b - /* delay - this is all done by guess */ - ldr r0, =0x00010000 -1: - subs r0, r0, #1 - bhi 1b - ldr r0, =SMRDATA1 - ldr r1, _TEXT_BASE - sub r0, r0, r1 - add r2, r0, #176 -2: - /* the address */ - ldr r1, [r0], #4 - /* the value */ - ldr r3, [r0], #4 - str r3, [r1] - cmp r2, r0 - bne 2b - - /* everything is fine now */ - mov pc, lr - - .ltorg - -SMRDATA: - .word MC_PUIA - .word MC_PUIA_VAL - .word MC_PUP - .word MC_PUP_VAL - .word MC_PUER - .word MC_PUER_VAL - .word MC_ASR - .word MC_ASR_VAL - .word MC_AASR - .word MC_AASR_VAL - .word EBI_CFGR - .word EBI_CFGR_VAL - .word SMC_CSR0 - .word SMC_CSR0_VAL - .word PLLAR - .word PLLAR_VAL - .word PLLBR - .word PLLBR_VAL - .word MCKR - .word MCKR_VAL - /* SMRDATA is 80 bytes long */ - /* here there's a delay of 100 */ -SMRDATA1: - .word PIOC_ASR - .word PIOC_ASR_VAL - .word PIOC_BSR - .word PIOC_BSR_VAL - .word PIOC_PDR - .word PIOC_PDR_VAL - .word EBI_CSA - .word EBI_CSA_VAL - .word SDRC_CR - .word SDRC_CR_VAL - .word SDRC_MR - .word SDRC_MR_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRC_MR - .word SDRC_MR_VAL1 - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRC_MR - .word SDRC_MR_VAL2 - .word SDRAM1 - .word SDRAM_VAL - .word SDRC_TR - .word SDRC_TR_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRC_MR - .word SDRC_MR_VAL3 - .word SDRAM - .word SDRAM_VAL - /* SMRDATA1 is 176 bytes long */ -#endif /* CONFIG_BOOTBINFUNC */ diff --git a/board/mpc8540eval/mpc8540eval.c b/board/mpc8540eval/mpc8540eval.c index fa0a336866..bf270f4ce6 100644 --- a/board/mpc8540eval/mpc8540eval.c +++ b/board/mpc8540eval/mpc8540eval.c @@ -101,7 +101,7 @@ phys_size_t initdram (int board_type) #if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus is not emulating flash */ get_sys_info(&sysinfo); /* if localbus freq is less than 66MHz,we use bypass mode,otherwise use DLL */ - if(sysinfo.freqSystemBus/(CONFIG_SYS_LBC_LCRR & 0x0f) < 66000000) { + if(sysinfo.freqSystemBus/(CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV) < 66000000) { lbc->lcrr = (CONFIG_SYS_LBC_LCRR & 0x0fffffff)| 0x80000000; } else { lbc->lcrr = CONFIG_SYS_LBC_LCRR & 0x7fffffff; diff --git a/board/mpr2/lowlevel_init.S b/board/mpr2/lowlevel_init.S index 060957ad06..5f02bd4bb2 100644 --- a/board/mpr2/lowlevel_init.S +++ b/board/mpr2/lowlevel_init.S @@ -22,6 +22,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ +#include .global lowlevel_init @@ -33,59 +34,35 @@ lowlevel_init: /* * Set frequency multipliers and dividers in FRQCR. */ - mov.l WTCSR_A,r1 - mov.l WTCSR_D,r0 - mov.w r0,@r1 + write16 WTCSR_A, WTCSR_D - mov.l WTCNT_A,r1 - mov.l WTCNT_D,r0 - mov.w r0,@r1 + write16 WTCNT_A, WTCNT_D - mov.l FRQCR_A,r1 - mov.l FRQCR_D,r0 - mov.w r0,@r1 + write16 FRQCR_A, FRQCR_D /* * Setup CS0 (Flash). */ - mov.l CS0BCR_A, r1 - mov.l CS0BCR_D, r0 - mov.l r0, @r1 + write32 CS0BCR_A, CS0BCR_D - mov.l CS0WCR_A, r1 - mov.l CS0WCR_D, r0 - mov.l r0, @r1 + write32 CS0WCR_A, CS0WCR_D /* * Setup CS3 (SDRAM). */ - mov.l CS3BCR_A, r1 - mov.l CS3BCR_D, r0 - mov.l r0, @r1 + write32 CS3BCR_A, CS3BCR_D - mov.l CS3WCR_A, r1 - mov.l CS3WCR_D, r0 - mov.l r0, @r1 + write32 CS3WCR_A, CS3WCR_D - mov.l SDCR_A, r1 - mov.l SDCR_D1, r0 - mov.l r0, @r1 + write32 SDCR_A, SDCR_D1 - mov.l RTCSR_A, r1 - mov.l RTCSR_D, r0 - mov.l r0, @r1 + write32 RTCSR_A, RTCSR_D - mov.l RTCNT_A, r1 - mov.l RTCNT_D, r0 - mov.l r0, @r1 + write32 RTCNT_A, RTCNT_D - mov.l RTCOR_A, r1 - mov.l RTCOR_D, r0 - mov.l r0, @r1 + write32 RTCOR_A, RTCOR_D - mov.l SDCR_A, r1 - mov.l SDCR_D2, r0 - mov.l r0, @r1 + write32 SDCR_A, SDCR_D2 mov.l SDMR3_A, r1 mov.l SDMR3_D, r0 @@ -112,21 +89,27 @@ WTCSR_D: .long 0xA507 /* divide by 4096 */ /* * Spansion S29GL256N11 @ 48 MHz */ -CS0BCR_D: .long 0x12490400 /* 1 idle cycle inserted, normal space, 16 bit */ -CS0WCR_D: .long 0x00000340 /* tSW=0.5ck, 6 wait cycles, NO external wait, tHW=0.5ck */ +/* 1 idle cycle inserted, normal space, 16 bit */ +CS0BCR_D: .long 0x12490400 +/* tSW=0.5ck, 6 wait cycles, NO external wait, tHW=0.5ck */ +CS0WCR_D: .long 0x00000340 /* * Samsung K4S511632B-UL75 @ 48 MHz * Micron MT48LC32M16A2-75 @ 48 MHz */ -CS3BCR_D: .long 0x10004400 /* CS3BCR = 0x10004400, minimum idle cycles, SDRAM, 16 bit */ -CS3WCR_D: .long 0x00000091 /* tRP=1ck, tRCD=1ck, CL=2, tRWL=2ck, tRC=4ck */ -SDCR_D1: .long 0x00000012 /* no refresh, 13 rows, 10 cols, NO bank active mode */ -SDCR_D2: .long 0x00000812 /* refresh */ -RTCSR_D: .long 0xA55A0008 /* 1/4, once */ -RTCNT_D: .long 0xA55A005D /* count 93 */ -RTCOR_D: .long 0xa55a005d /* count 93 */ -SDMR3_D: .long 0x440 /* mode register CL2, burst read and SINGLE WRITE */ +/* CS3BCR = 0x10004400, minimum idle cycles, SDRAM, 16 bit */ +CS3BCR_D: .long 0x10004400 +/* tRP=1ck, tRCD=1ck, CL=2, tRWL=2ck, tRC=4ck */ +CS3WCR_D: .long 0x00000091 +/* no refresh, 13 rows, 10 cols, NO bank active mode */ +SDCR_D1: .long 0x00000012 +SDCR_D2: .long 0x00000812 /* refresh */ +RTCSR_D: .long 0xA55A0008 /* 1/4, once */ +RTCNT_D: .long 0xA55A005D /* count 93 */ +RTCOR_D: .long 0xa55a005d /* count 93 */ +/* mode register CL2, burst read and SINGLE WRITE */ +SDMR3_D: .long 0x440 /* * Registers diff --git a/board/ms7722se/lowlevel_init.S b/board/ms7722se/lowlevel_init.S index 8b46595f33..1cb57e72ec 100644 --- a/board/ms7722se/lowlevel_init.S +++ b/board/ms7722se/lowlevel_init.S @@ -27,13 +27,14 @@ #include #include +#include /* - * Board specific low level init code, called _very_ early in the - * startup sequence. Relocation to SDRAM has not happened yet, no - * stack is available, bss section has not been initialised, etc. + * Board specific low level init code, called _very_ early in the + * startup sequence. Relocation to SDRAM has not happened yet, no + * stack is available, bss section has not been initialised, etc. * - * (Note: As no stack is available, no subroutines can be called...). + * (Note: As no stack is available, no subroutines can be called...). */ .global lowlevel_init @@ -43,167 +44,96 @@ lowlevel_init: - /* Address of Cache Control Register */ - mov.l CCR_A, r1 - /*Instruction Cache Invalidate */ - mov.l CCR_D, r0 - mov.l r0, @r1 + /* + * Cache Control Register + * Instruction Cache Invalidate + */ + write32 CCR_A, CCR_D - /* Address of MMU Control Register */ - mov.l MMUCR_A, r1 - /* TI == TLB Invalidate bit */ - mov.l MMUCR_D, r0 - mov.l r0, @r1 + /* + * Address of MMU Control Register + * TI == TLB Invalidate bit + */ + write32 MMUCR_A, MMUCR_D /* Address of Power Control Register 0 */ - mov.l MSTPCR0_A, r1 - mov.l MSTPCR0_D, r0 - mov.l r0, @r1 + write32 MSTPCR0_A, MSTPCR0_D /* Address of Power Control Register 2 */ - mov.l MSTPCR2_A, r1 - mov.l MSTPCR2_D, r0 - mov.l r0, @r1 + write32 MSTPCR2_A, MSTPCR2_D - mov.l SBSCR_A, r1 - mov.w SBSCR_D, r0 - mov.w r0, @r1 + write16 SBSCR_A, SBSCR_D - mov.l PSCR_A, r1 - mov.w PSCR_D, r0 - mov.w r0, @r1 + write16 PSCR_A, PSCR_D /* 0xA4520004 (Watchdog Control / Status Register) */ -! mov.l RWTCSR_A, r1 - /* 0xA507 -> timer_STOP/WDT_CLK=max */ -! mov.w RWTCSR_D_1, r0 -! mov.w r0, @r1 +! write16 RWTCSR_A, RWTCSR_D_1 /* 0xA507 -> timer_STOP/WDT_CLK=max */ /* 0xA4520000 (Watchdog Count Register) */ - mov.l RWTCNT_A, r1 - /*0x5A00 -> Clear */ - mov.w RWTCNT_D, r0 - mov.w r0, @r1 + write16 RWTCNT_A, RWTCNT_D /*0x5A00 -> Clear */ /* 0xA4520004 (Watchdog Control / Status Register) */ - mov.l RWTCSR_A, r1 - /* 0xA504 -> timer_STOP/CLK=500ms */ - mov.w RWTCSR_D_2, r0 - mov.w r0, @r1 + write16 RWTCSR_A, RWTCSR_D_2 /* 0xA504 -> timer_STOP/CLK=500ms */ /* 0xA4150000 Frequency control register */ - mov.l FRQCR_A, r1 - mov.l FRQCR_D, r0 ! - mov.l r0, @r1 + write32 FRQCR_A, FRQCR_D - mov.l CCR_A, r1 - mov.l CCR_D_2, r0 - mov.l r0, @r1 + write32 CCR_A, CCR_D_2 bsc_init: - mov.l PSELA_A, r1 - mov.w PSELA_D, r0 - mov.w r0, @r1 + write16 PSELA_A, PSELA_D - mov.l DRVCR_A, r1 - mov.w DRVCR_D, r0 - mov.w r0, @r1 + write16 DRVCR_A, DRVCR_D - mov.l PCCR_A, r1 - mov.w PCCR_D, r0 - mov.w r0, @r1 + write16 PCCR_A, PCCR_D - mov.l PECR_A, r1 - mov.w PECR_D, r0 - mov.w r0, @r1 + write16 PECR_A, PECR_D - mov.l PJCR_A, r1 - mov.w PJCR_D, r0 - mov.w r0, @r1 + write16 PJCR_A, PJCR_D - mov.l PXCR_A, r1 - mov.w PXCR_D, r0 - mov.w r0, @r1 + write16 PXCR_A, PXCR_D - mov.l CMNCR_A, r1 ! CMNCR address -> R1 - mov.l CMNCR_D, r0 ! CMNCR data -> R0 - mov.l r0, @r1 ! CMNCR set + write32 CMNCR_A, CMNCR_D - mov.l CS0BCR_A, r1 ! CS0BCR address -> R1 - mov.l CS0BCR_D, r0 ! CS0BCR data -> R0 - mov.l r0, @r1 ! CS0BCR set + write32 CS0BCR_A, CS0BCR_D - mov.l CS2BCR_A, r1 ! CS2BCR address -> R1 - mov.l CS2BCR_D, r0 ! CS2BCR data -> R0 - mov.l r0, @r1 ! CS2BCR set + write32 CS2BCR_A, CS2BCR_D - mov.l CS4BCR_A, r1 ! CS4BCR address -> R1 - mov.l CS4BCR_D, r0 ! CS4BCR data -> R0 - mov.l r0, @r1 ! CS4BCR set + write32 CS4BCR_A, CS4BCR_D - mov.l CS5ABCR_A, r1 ! CS5ABCR address -> R1 - mov.l CS5ABCR_D, r0 ! CS5ABCR data -> R0 - mov.l r0, @r1 ! CS5ABCR set + write32 CS5ABCR_A, CS5ABCR_D - mov.l CS5BBCR_A, r1 ! CS5BBCR address -> R1 - mov.l CS5BBCR_D, r0 ! CS5BBCR data -> R0 - mov.l r0, @r1 ! CS5BBCR set + write32 CS5BBCR_A, CS5BBCR_D - mov.l CS6ABCR_A, r1 ! CS6ABCR address -> R1 - mov.l CS6ABCR_D, r0 ! CS6ABCR data -> R0 - mov.l r0, @r1 ! CS6ABCR set + write32 CS6ABCR_A, CS6ABCR_D - mov.l CS0WCR_A, r1 ! CS0WCR address -> R1 - mov.l CS0WCR_D, r0 ! CS0WCR data -> R0 - mov.l r0, @r1 ! CS0WCR set + write32 CS0WCR_A, CS0WCR_D - mov.l CS2WCR_A, r1 ! CS2WCR address -> R1 - mov.l CS2WCR_D, r0 ! CS2WCR data -> R0 - mov.l r0, @r1 ! CS2WCR set + write32 CS2WCR_A, CS2WCR_D - mov.l CS4WCR_A, r1 ! CS4WCR address -> R1 - mov.l CS4WCR_D, r0 ! CS4WCR data -> R0 - mov.l r0, @r1 ! CS4WCR set + write32 CS4WCR_A, CS4WCR_D - mov.l CS5AWCR_A, r1 ! CS5AWCR address -> R1 - mov.l CS5AWCR_D, r0 ! CS5AWCR data -> R0 - mov.l r0, @r1 ! CS5AWCR set + write32 CS5AWCR_A, CS5AWCR_D - mov.l CS5BWCR_A, r1 ! CS5BWCR address -> R1 - mov.l CS5BWCR_D, r0 ! CS5BWCR data -> R0 - mov.l r0, @r1 ! CS5BWCR set + write32 CS5BWCR_A, CS5BWCR_D - mov.l CS6AWCR_A, r1 ! CS6AWCR address -> R1 - mov.l CS6AWCR_D, r0 ! CS6AWCR data -> R0 - mov.l r0, @r1 ! CS6AWCR set + write32 CS6AWCR_A, CS6AWCR_D ! SDRAM initialization - mov.l SDCR_A, r1 ! SB_SDCR address -> R1 - mov.l SDCR_D, r0 ! SB_SDCR data -> R0 - mov.l r0, @r1 ! SB_SDCR set + write32 SDCR_A, SDCR_D - mov.l SDWCR_A, r1 ! SB_SDWCR address -> R1 - mov.l SDWCR_D, r0 ! SB_SDWCR data -> R0 - mov.l r0, @r1 ! SB_SDWCR set + write32 SDWCR_A, SDWCR_D - mov.l SDPCR_A, r1 ! SB_SDPCR address -> R1 - mov.l SDPCR_D, r0 ! SB_SDPCR data -> R0 - mov.l r0, @r1 ! SB_SDPCR set + write32 SDPCR_A, SDPCR_D - mov.l RTCOR_A, r1 ! SB_RTCOR address -> R1 - mov.l RTCOR_D, r0 ! SB_RTCOR data -> R0 - mov.l r0, @r1 ! SB_RTCOR set + write32 RTCOR_A, RTCOR_D - mov.l RTCSR_A, r1 ! SB_RTCSR address -> R1 - mov.l RTCSR_D, r0 ! SB_RTCSR data -> R0 - mov.l r0, @r1 ! SB_RTCSR set + write32 RTCSR_A, RTCSR_D - mov.l SDMR3_A, r1 ! SDMR3 address -> R1 - mov #0x00, r0 ! SDMR3 data -> R0 - mov.b r0, @r1 ! SDMR3 set + write8 SDMR3_A, SDMR3_D - ! BL bit off (init = ON) (?!?) + ! BL bit off (init = ON) (?!?) stc sr, r0 ! BL bit off(init=ON) mov.l SR_MASK_D, r1 @@ -232,28 +162,28 @@ MSTPCR0_D: .long 0x00001001 MSTPCR2_D: .long 0xffffffff FRQCR_D: .long 0x07022538 -PSELA_A: .long 0xa405014E -PSELA_D: .word 0x0A10 +PSELA_A: .long 0xa405014E +PSELA_D: .word 0x0A10 .align 2 -DRVCR_A: .long 0xa405018A -DRVCR_D: .word 0x0554 +DRVCR_A: .long 0xa405018A +DRVCR_D: .word 0x0554 .align 2 -PCCR_A: .long 0xa4050104 -PCCR_D: .word 0x8800 +PCCR_A: .long 0xa4050104 +PCCR_D: .word 0x8800 .align 2 -PECR_A: .long 0xa4050108 -PECR_D: .word 0x0000 +PECR_A: .long 0xa4050108 +PECR_D: .word 0x0000 .align 2 -PJCR_A: .long 0xa4050110 -PJCR_D: .word 0x1000 +PJCR_A: .long 0xa4050110 +PJCR_D: .word 0x1000 .align 2 -PXCR_A: .long 0xa4050148 -PXCR_D: .word 0x0AAA +PXCR_A: .long 0xa4050148 +PXCR_D: .word 0x0AAA .align 2 CMNCR_A: .long CMNCR @@ -295,6 +225,7 @@ RTCOR_D: .long 0xA55A0034 RTCSR_A: .long SBSC_RTCSR RTCSR_D: .long 0xA55A0010 SDMR3_A: .long 0xFE500180 +SDMR3_D: .long 0x0 .align 1 diff --git a/board/ms7750se/lowlevel_init.S b/board/ms7750se/lowlevel_init.S index d3e3cd5e8d..5e09a39bab 100644 --- a/board/ms7750se/lowlevel_init.S +++ b/board/ms7750se/lowlevel_init.S @@ -29,120 +29,94 @@ #include #include +#include #ifdef CONFIG_CPU_SH7751 -#define BCR2_D_VALUE 0x2FFC /* Area 1-6 width: 32/32/32/32/32/16 */ -#define WCR1_D_VALUE 0x02770771 /* DMA:0 A6:2 A3:0 A0:1 Others:15 */ +#define BCR2_D_VALUE 0x2FFC /* Area 1-6 width: 32/32/32/32/32/16 */ +#define WCR1_D_VALUE 0x02770771 /* DMA:0 A6:2 A3:0 A0:1 Others:15 */ #ifdef CONFIG_MARUBUN_PCCARD -#define WCR2_D_VALUE 0xFFFE4FE7 /* A6:15 A6B:7 A5:15 A5B:7 A4:15 - A3:2 A2:15 A1:15 A0:6 A0B:7 */ +#define WCR2_D_VALUE 0xFFFE4FE7 /* A6:15 A6B:7 A5:15 A5B:7 A4:15 + A3:2 A2:15 A1:15 A0:6 A0B:7 */ #else /* CONFIG_MARUBUN_PCCARD */ -#define WCR2_D_VALUE 0x7FFE4FE7 /* A6:3 A6B:7 A5:15 A5B:7 A4:15 - A3:2 A2:15 A1:15 A0:6 A0B:7 */ +#define WCR2_D_VALUE 0x7FFE4FE7 /* A6:3 A6B:7 A5:15 A5B:7 A4:15 + A3:2 A2:15 A1:15 A0:6 A0B:7 */ #endif /* CONFIG_MARUBUN_PCCARD */ -#define WCR3_D_VALUE 0x01777771 /* A6: 0-1 A5: 1-3 A4: 1-3 A3: 1-3 - A2: 1-3 A1: 1-3 A0: 0-1 */ -#define RTCOR_D_VALUE 0xA50D /* Write code A5, data 0D (~15us?) */ -#define SDMR3_ADDRESS 0xFF940088 /* SDMR3 address on 32-bit bus */ -#define MCR_D1_VALUE 0x100901B4 /* SDRAM 32-bit, CAS/RAS Refresh, ... */ -#define MCR_D2_VALUE 0x500901B4 /* Same w/MRSET now 1 (mode reg cmd) */ +#define WCR3_D_VALUE 0x01777771 /* A6: 0-1 A5: 1-3 A4: 1-3 A3: 1-3 + A2: 1-3 A1: 1-3 A0: 0-1 */ +#define RTCOR_D_VALUE 0xA50D /* Write code A5, data 0D (~15us?) */ +#define SDMR3_ADDRESS 0xFF940088 /* SDMR3 address on 32-bit bus */ +#define MCR_D1_VALUE 0x100901B4 /* SDRAM 32-bit, CAS/RAS Refresh, .. */ +#define MCR_D2_VALUE 0x500901B4 /* Same w/MRSET now 1 (mode reg cmd) */ #else /* CONFIG_CPU_SH7751 */ -#define BCR2_D_VALUE 0x2E3C /* Area 1-6 width: 32/32/64/16/32/16 */ -#define WCR1_D_VALUE 0x02720777 /* DMA:0 A6:2 A4:2 A3:0 Others:15 */ -#define WCR2_D_VALUE 0xFFFE4FFF /* A6:15 A6B:7 A5:15 A5B:7 A4:15 - A3:2 A2:15 A1:15 A0:15 A0B:7 */ -#define WCR3_D_VALUE 0x01717771 /* A6: 0-1 A5: 1-3 A4: 0-1 A3: 1-3 - A2: 1-3 A1: 1-3 A0: 0-1 */ -#define RTCOR_D_VALUE 0xA510 /* Write code A5, data 10 (~15us?) */ -#define SDMR3_ADDRESS 0xFF940110 /* SDMR3 address on 64-bit bus */ -#define MCR_D1_VALUE 0x8801001C /* SDRAM 64-bit, CAS/RAS Refresh, ... */ -#define MCR_D2_VALUE 0xC801001C /* Same w/MRSET now 1 (mode reg cmd) */ +#define BCR2_D_VALUE 0x2E3C /* Area 1-6 width: 32/32/64/16/32/16 */ +#define WCR1_D_VALUE 0x02720777 /* DMA:0 A6:2 A4:2 A3:0 Others:15 */ +#define WCR2_D_VALUE 0xFFFE4FFF /* A6:15 A6B:7 A5:15 A5B:7 A4:15 + A3:2 A2:15 A1:15 A0:15 A0B:7 */ +#define WCR3_D_VALUE 0x01717771 /* A6: 0-1 A5: 1-3 A4: 0-1 A3: 1-3 + A2: 1-3 A1: 1-3 A0: 0-1 */ +#define RTCOR_D_VALUE 0xA510 /* Write code A5, data 10 (~15us?) */ +#define SDMR3_ADDRESS 0xFF940110 /* SDMR3 address on 64-bit bus */ +#define MCR_D1_VALUE 0x8801001C /* SDRAM 64-bit, CAS/RAS Refresh, .. */ +#define MCR_D2_VALUE 0xC801001C /* Same w/MRSET now 1 (mode reg cmd) */ #endif /* CONFIG_CPU_SH7751 */ .global lowlevel_init .text - .align 2 + .align 2 lowlevel_init: - mov.l CCR_A, r1 ! CCR Address - mov.l CCR_D_DISABLE, r0 ! CCR Data - mov.l r0, @r1 + write32 CCR_A, CCR_D_DISABLE init_bsc: - mov.l FRQCR_A,r1 /* FRQCR Address */ - mov.l FRQCR_D,r0 /* FRQCR Data */ - mov.w r0,@r1 + write16 FRQCR_A, FRQCR_D - mov.l BCR1_A,r1 /* BCR1 Address */ - mov.l BCR1_D,r0 /* BCR1 Data */ - mov.l r0,@r1 + write32 BCR1_A, BCR1_D - mov.l BCR2_A,r1 /* BCR2 Address */ - mov.l BCR2_D,r0 /* BCR2 Data */ - mov.w r0,@r1 + write16 BCR2_A, BCR2_D - mov.l WCR1_A,r1 /* WCR1 Address */ - mov.l WCR1_D,r0 /* WCR1 Data */ - mov.l r0,@r1 + write32 WCR1_A, WCR1_D - mov.l WCR2_A,r1 /* WCR2 Address */ - mov.l WCR2_D,r0 /* WCR2 Data */ - mov.l r0,@r1 + write32 WCR2_A, WCR2_D - mov.l WCR3_A,r1 /* WCR3 Address */ - mov.l WCR3_D,r0 /* WCR3 Data */ - mov.l r0,@r1 + write32 WCR3_A, WCR3_D - mov.l MCR_A,r1 /* MCR Address */ - mov.l MCR_D1,r0 /* MCR Data1 */ - mov.l r0,@r1 + write32 MCR_A, MCR_D1 - mov.l SDMR3_A,r1 /* Set SDRAM mode */ - mov #0,r0 - mov.b r0,@r1 + /* Set SDRAM mode */ + write8 SDMR3_A, SDMR3_D ! Do you need PCMCIA setting? ! If so, please add the lines here... - mov.l RTCNT_A,r1 /* RTCNT Address */ - mov.l RTCNT_D,r0 /* RTCNT Data */ - mov.w r0,@r1 + write16 RTCNT_A, RTCNT_D + + write16 RTCOR_A, RTCOR_D - mov.l RTCOR_A,r1 /* RTCOR Address */ - mov.l RTCOR_D,r0 /* RTCOR Data */ - mov.w r0,@r1 + write16 RTCSR_A, RTCSR_D - mov.l RTCSR_A,r1 /* RTCSR Address */ - mov.l RTCSR_D,r0 /* RTCSR Data */ - mov.w r0,@r1 + write16 RFCR_A, RFCR_D - mov.l RFCR_A,r1 /* RFCR Address */ - mov.l RFCR_D,r0 /* RFCR Data */ - mov.w r0,@r1 /* Clear reflesh counter */ /* Wait DRAM refresh 30 times */ - mov #30,r3 + mov #30, r3 1: - mov.w @r1,r0 - extu.w r0,r2 - cmp/hi r3,r2 + mov.w @r1, r0 + extu.w r0, r2 + cmp/hi r3, r2 bf 1b - mov.l MCR_A,r1 /* MCR Address */ - mov.l MCR_D2,r0 /* MCR Data2 */ - mov.l r0,@r1 + write32 MCR_A, MCR_D2 - mov.l SDMR3_A,r1 /* Set SDRAM mode */ - mov #0,r0 - mov.b r0,@r1 + /* Set SDRAM mode */ + write8 SDMR3_A, SDMR3_D rts - nop + nop .align 2 -CCR_A: .long CCR -CCR_D_DISABLE: .long 0x0808 +CCR_A: .long CCR +CCR_D_DISABLE: .long 0x0808 FRQCR_A: .long FRQCR FRQCR_D: #ifdef CONFIG_CPU_TYPE_R @@ -172,6 +146,7 @@ RTCNT_D: .long 0xA500 /* RTCNT Write Code A5h Data 00h */ RTCOR_A: .long RTCOR RTCOR_D: .long RTCOR_D_VALUE /* Set refresh time (about 15us) */ SDMR3_A: .long SDMR3_ADDRESS +SDMR3_D: .long 0x00 MCR_A: .long MCR MCR_D1: .long MCR_D1_VALUE MCR_D2: .long MCR_D2_VALUE diff --git a/board/pm854/pm854.c b/board/pm854/pm854.c index fed0ed4318..5353d738b4 100644 --- a/board/pm854/pm854.c +++ b/board/pm854/pm854.c @@ -150,7 +150,7 @@ local_bus_init(void) */ get_sys_info(&sysinfo); - clkdiv = lbc->lcrr & 0x0f; + clkdiv = lbc->lcrr & LCRR_CLKDIV; lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; if (lbc_hz < 66) { diff --git a/board/pm856/pm856.c b/board/pm856/pm856.c index 932f1121e8..b14a3d34b1 100644 --- a/board/pm856/pm856.c +++ b/board/pm856/pm856.c @@ -306,7 +306,7 @@ local_bus_init(void) */ get_sys_info(&sysinfo); - clkdiv = lbc->lcrr & 0x0f; + clkdiv = lbc->lcrr & LCRR_CLKDIV; lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; if (lbc_hz < 66) { diff --git a/board/renesas/MigoR/lowlevel_init.S b/board/renesas/MigoR/lowlevel_init.S index 4c1900ec25..e32a7afb49 100644 --- a/board/renesas/MigoR/lowlevel_init.S +++ b/board/renesas/MigoR/lowlevel_init.S @@ -27,13 +27,14 @@ #include #include +#include /* - * Board specific low level init code, called _very_ early in the - * startup sequence. Relocation to SDRAM has not happened yet, no - * stack is available, bss section has not been initialised, etc. + * Board specific low level init code, called _very_ early in the + * startup sequence. Relocation to SDRAM has not happened yet, no + * stack is available, bss section has not been initialised, etc. * - * (Note: As no stack is available, no subroutines can be called...). + * (Note: As no stack is available, no subroutines can be called...). */ .global lowlevel_init @@ -42,141 +43,83 @@ .align 2 lowlevel_init: - mov.l CCR_A, r1 ! Address of Cache Control Register - mov.l CCR_D, r0 ! Instruction Cache Invalidate - mov.l r0, @r1 + write32 CCR_A, CCR_D ! Address of Cache Control Register + ! Instruction Cache Invalidate - mov.l MMUCR_A, r1 ! Address of MMU Control Register - mov.l MMUCR_D, r0 ! TI == TLB Invalidate bit - mov.l r0, @r1 + write32 MMUCR_A, MMUCR_D ! Address of MMU Control Register + ! TI == TLB Invalidate bit - mov.l MSTPCR0_A, r1 ! Address of Power Control Register 0 - mov.l MSTPCR0_D, r0 ! - mov.l r0, @r1 + write32 MSTPCR0_A, MSTPCR0_D ! Address of Power Control Register 0 - mov.l MSTPCR2_A, r1 ! Address of Power Control Register 2 - mov.l MSTPCR2_D, r0 ! - mov.l r0, @r1 + write32 MSTPCR2_A, MSTPCR2_D ! Address of Power Control Register 2 - mov.l PFC_PULCR_A, r1 - mov.w PFC_PULCR_D, r0 - mov.w r0,@r1 + write16 PFC_PULCR_A, PFC_PULCR_D - mov.l PFC_DRVCR_A, r1 - mov.w PFC_DRVCR_D, r0 - mov.w r0, @r1 + write16 PFC_DRVCR_A, PFC_DRVCR_D - mov.l SBSCR_A, r1 ! - mov.w SBSCR_D, r0 ! - mov.w r0, @r1 + write16 SBSCR_A, SBSCR_D - mov.l PSCR_A, r1 ! - mov.w PSCR_D, r0 ! - mov.w r0, @r1 + write16 PSCR_A, PSCR_D - mov.l RWTCSR_A, r1 ! 0xA4520004 (Watchdog Control / Status Register) - mov.w RWTCSR_D_1, r0 ! 0xA507 -> timer_STOP/WDT_CLK=max - mov.w r0, @r1 + write16 RWTCSR_A, RWTCSR_D_1 ! 0xA4520004 (Watchdog Control / Status Register) + ! 0xA507 -> timer_STOP / WDT_CLK = max - mov.l RWTCNT_A, r1 ! 0xA4520000 (Watchdog Count Register) - mov.w RWTCNT_D, r0 ! 0x5A00 -> Clear - mov.w r0, @r1 + write16 RWTCNT_A, RWTCNT_D ! 0xA4520000 (Watchdog Count Register) + ! 0x5A00 -> Clear - mov.l RWTCSR_A, r1 ! 0xA4520004 (Watchdog Control / Status Register) - mov.w RWTCSR_D_2, r0 ! 0xA504 -> timer_STOP/CLK=500ms - mov.w r0, @r1 + write16 RWTCSR_A, RWTCSR_D_2 ! 0xA4520004 (Watchdog Control / Status Register) + ! 0xA504 -> timer_STOP / CLK = 500ms - mov.l DLLFRQ_A, r1 ! 20080115 - mov.l DLLFRQ_D, r0 ! 20080115 - mov.l r0, @r1 + write32 DLLFRQ_A, DLLFRQ_D ! 20080115 + ! 20080115 - mov.l FRQCR_A, r1 ! 0xA4150000 Frequency control register - mov.l FRQCR_D, r0 ! 20080115 - mov.l r0, @r1 + write32 FRQCR_A, FRQCR_D ! 0xA4150000 Frequency control register + ! 20080115 - mov.l CCR_A, r1 ! Address of Cache Control Register - mov.l CCR_D_2, r0 ! ?? - mov.l r0, @r1 + write32 CCR_A, CCR_D_2 ! Address of Cache Control Register + ! ?? bsc_init: - mov.l CMNCR_A, r1 ! CMNCR address -> R1 - mov.l CMNCR_D, r0 ! CMNCR data -> R0 - mov.l r0, @r1 ! CMNCR set + write32 CMNCR_A, CMNCR_D - mov.l CS0BCR_A, r1 ! CS0BCR address -> R1 - mov.l CS0BCR_D, r0 ! CS0BCR data -> R0 - mov.l r0, @r1 ! CS0BCR set + write32 CS0BCR_A, CS0BCR_D - mov.l CS4BCR_A, r1 ! CS4BCR address -> R1 - mov.l CS4BCR_D, r0 ! CS4BCR data -> R0 - mov.l r0, @r1 ! CS4BCR set + write32 CS4BCR_A, CS4BCR_D - mov.l CS5ABCR_A, r1 ! CS5ABCR address -> R1 - mov.l CS5ABCR_D, r0 ! CS5ABCR data -> R0 - mov.l r0, @r1 ! CS5ABCR set + write32 CS5ABCR_A, CS5ABCR_D - mov.l CS5BBCR_A, r1 ! CS5BBCR address -> R1 - mov.l CS5BBCR_D, r0 ! CS5BBCR data -> R0 - mov.l r0, @r1 ! CS5BBCR set + write32 CS5BBCR_A, CS5BBCR_D - mov.l CS6ABCR_A, r1 ! CS6ABCR address -> R1 - mov.l CS6ABCR_D, r0 ! CS6ABCR data -> R0 - mov.l r0, @r1 ! CS6ABCR set + write32 CS6ABCR_A, CS6ABCR_D - mov.l CS0WCR_A, r1 ! CS0WCR address -> R1 - mov.l CS0WCR_D, r0 ! CS0WCR data -> R0 - mov.l r0, @r1 ! CS0WCR set + write32 CS0WCR_A, CS0WCR_D - mov.l CS4WCR_A, r1 ! CS4WCR address -> R1 - mov.l CS4WCR_D, r0 ! CS4WCR data -> R0 - mov.l r0, @r1 ! CS4WCR set + write32 CS4WCR_A, CS4WCR_D - mov.l CS5AWCR_A, r1 ! CS5AWCR address -> R1 - mov.l CS5AWCR_D, r0 ! CS5AWCR data -> R0 - mov.l r0, @r1 ! CS5AWCR set + write32 CS5AWCR_A, CS5AWCR_D - mov.l CS5BWCR_A, r1 ! CS5BWCR address -> R1 - mov.l CS5BWCR_D, r0 ! CS5BWCR data -> R0 - mov.l r0, @r1 ! CS5BWCR set + write32 CS5BWCR_A, CS5BWCR_D - mov.l CS6AWCR_A, r1 ! CS6AWCR address -> R1 - mov.l CS6AWCR_D, r0 ! CS6AWCR data -> R0 - mov.l r0, @r1 ! CS6AWCR set + write32 CS6AWCR_A, CS6AWCR_D ! SDRAM initialization - mov.l SDCR_A, r1 ! SB_SDCR address -> R1 - mov.l SDCR_D, r0 ! SB_SDCR data -> R0 - mov.l r0, @r1 ! SB_SDCR set + write32 SDCR_A, SDCR_D - mov.l SDWCR_A, r1 ! SB_SDWCR address -> R1 - mov.l SDWCR_D, r0 ! SB_SDWCR data -> R0 - mov.l r0, @r1 ! SB_SDWCR set + write32 SDWCR_A, SDWCR_D - mov.l SDPCR_A, r1 ! SB_SDPCR address -> R1 - mov.l SDPCR_D, r0 ! SB_SDPCR data -> R0 - mov.l r0, @r1 ! SB_SDPCR set + write32 SDPCR_A, SDPCR_D - mov.l RTCOR_A, r1 ! SB_RTCOR address -> R1 - mov.l RTCOR_D, r0 ! SB_RTCOR data -> R0 - mov.l r0, @r1 ! SB_RTCOR set + write32 RTCOR_A, RTCOR_D - mov.l RTCNT_A, r1 ! SB_RTCNT address -> R1 - mov.l RTCNT_D, r0 ! SB_RTCNT data -> R0 - mov.l r0, @r1 + write32 RTCNT_A, RTCNT_D - mov.l RTCSR_A, r1 ! SB_RTCSR address -> R1 - mov.l RTCSR_D, r0 ! SB_RTCSR data -> R0 - mov.l r0, @r1 ! SB_RTCSR set + write32 RTCSR_A, RTCSR_D - mov.l RFCR_A, r1 ! SB_RFCR address -> R1 - mov.l RFCR_D, r0 ! SB_RFCR data -> R0 - mov.l r0, @r1 + write32 RFCR_A, RFCR_D - mov.l SDMR3_A, r1 ! SDMR3 address -> R1 - mov #0x00, r0 ! SDMR3 data -> R0 - mov.b r0, @r1 ! SDMR3 set + write8 SDMR3_A, SDMR3_D - ! BL bit off (init = ON) (?!?) + ! BL bit off (init = ON) (?!?) stc sr, r0 ! BL bit off(init=ON) mov.l SR_MASK_D, r1 @@ -252,6 +195,7 @@ RFCR_A: .long SBSC_RFCR RFCR_D: .long 0xA55A0221 RTCSR_D: .long 0xA55A009a SDMR3_A: .long 0xFE581180 +SDMR3_D: .long 0x0 SR_MASK_D: .long 0xEFFFFF0F diff --git a/board/renesas/ap325rxa/lowlevel_init.S b/board/renesas/ap325rxa/lowlevel_init.S index 4f6658879c..b32f49132d 100644 --- a/board/renesas/ap325rxa/lowlevel_init.S +++ b/board/renesas/ap325rxa/lowlevel_init.S @@ -23,6 +23,7 @@ #include #include #include +#include /* * Board specific low level init code, called _very_ early in the @@ -38,113 +39,59 @@ .align 2 lowlevel_init: - mov.l DRVCRA_A, r1 - mov.l DRVCRA_D, r0 - mov.w r0, @r1 + write16 DRVCRA_A, DRVCRA_D - mov.l DRVCRB_A, r1 - mov.l DRVCRB_D, r0 - mov.w r0, @r1 + write16 DRVCRB_A, DRVCRB_D - mov.l RWTCSR_A, r1 - mov.l RWTCSR_D1, r0 - mov.w r0, @r1 + write16 RWTCSR_A, RWTCSR_D1 - mov.l RWTCNT_A, r1 - mov.l RWTCNT_D, r0 - mov.w r0, @r1 + write16 RWTCNT_A, RWTCNT_D - mov.l RWTCSR_A, r1 - mov.l RWTCSR_D2, r0 - mov.w r0, @r1 + write16 RWTCSR_A, RWTCSR_D2 - mov.l FRQCR_A, r1 - mov.l FRQCR_D, r0 - mov.l r0, @r1 + write32 FRQCR_A, FRQCR_D - mov.l CMNCR_A, r1 - mov.l CMNCR_D, r0 - mov.l r0, @r1 + write32 CMNCR_A, CMNCR_D - mov.l CS0BCR_A ,r1 - mov.l CS0BCR_D ,r0 - mov.l r0, @r1 + write32 CS0BCR_A, CS0BCR_D - mov.l CS4BCR_A ,r1 - mov.l CS4BCR_D ,r0 - mov.l r0, @r1 + write32 CS4BCR_A, CS4BCR_D - mov.l CS5ABCR_A ,r1 - mov.l CS5ABCR_D ,r0 - mov.l r0, @r1 + write32 CS5ABCR_A, CS5ABCR_D - mov.l CS5BBCR_A ,r1 - mov.l CS5BBCR_D ,r0 - mov.l r0, @r1 + write32 CS5BBCR_A, CS5BBCR_D - mov.l CS6ABCR_A ,r1 - mov.l CS6ABCR_D ,r0 - mov.l r0, @r1 + write32 CS6ABCR_A, CS6ABCR_D - mov.l CS6BBCR_A ,r1 - mov.l CS6BBCR_D ,r0 - mov.l r0, @r1 + write32 CS6BBCR_A, CS6BBCR_D - mov.l CS0WCR_A ,r1 - mov.l CS0WCR_D ,r0 - mov.l r0, @r1 + write32 CS0WCR_A, CS0WCR_D - mov.l CS4WCR_A ,r1 - mov.l CS4WCR_D ,r0 - mov.l r0, @r1 + write32 CS4WCR_A, CS4WCR_D - mov.l CS5AWCR_A ,r1 - mov.l CS5AWCR_D ,r0 - mov.l r0, @r1 + write32 CS5AWCR_A, CS5AWCR_D - mov.l CS5BWCR_A ,r1 - mov.l CS5BWCR_D ,r0 - mov.l r0, @r1 + write32 CS5BWCR_A, CS5BWCR_D - mov.l CS6AWCR_A ,r1 - mov.l CS6AWCR_D ,r0 - mov.l r0, @r1 + write32 CS6AWCR_A, CS6AWCR_D - mov.l CS6BWCR_A ,r1 - mov.l CS6BWCR_D ,r0 - mov.l r0, @r1 + write32 CS6BWCR_A, CS6BWCR_D - mov.l SBSC_SDCR_A, r1 - mov.l SBSC_SDCR_D1, r0 - mov.l r0, @r1 + write32 SBSC_SDCR_A, SBSC_SDCR_D1 - mov.l SBSC_SDWCR_A, r1 - mov.l SBSC_SDWCR_D, r0 - mov.l r0, @r1 + write32 SBSC_SDWCR_A, SBSC_SDWCR_D - mov.l SBSC_SDPCR_A, r1 - mov.l SBSC_SDPCR_D, r0 - mov.l r0, @r1 + write32 SBSC_SDPCR_A, SBSC_SDPCR_D - mov.l SBSC_RTCSR_A, r1 - mov.l SBSC_RTCSR_D, r0 - mov.l r0, @r1 + write32 SBSC_RTCSR_A, SBSC_RTCSR_D - mov.l SBSC_RTCNT_A, r1 - mov.l SBSC_RTCNT_D, r0 - mov.l r0, @r1 + write32 SBSC_RTCNT_A, SBSC_RTCNT_D - mov.l SBSC_RTCOR_A, r1 - mov.l SBSC_RTCOR_D, r0 - mov.l r0, @r1 + write32 SBSC_RTCOR_A, SBSC_RTCOR_D - mov.l SBSC_SDMR3_A1, r1 - mov.l SBSC_SDMR3_D, r0 - mov.b r0, @r1 + write8 SBSC_SDMR3_A1, SBSC_SDMR3_D - mov.l SBSC_SDMR3_A2, r1 - mov.l SBSC_SDMR3_D, r0 - mov.b r0, @r1 + write8 SBSC_SDMR3_A2, SBSC_SDMR3_D mov.l SLEEP_CNT, r1 2: tst r1, r1 @@ -152,19 +99,13 @@ lowlevel_init: bf/s 2b dt r1 - mov.l SBSC_SDMR3_A3, r1 - mov.l SBSC_SDMR3_D, r0 - mov.b r0, @r1 + write8 SBSC_SDMR3_A3, SBSC_SDMR3_D - mov.l SBSC_SDCR_A, r1 - mov.l SBSC_SDCR_D2, r0 - mov.l r0, @r1 + write32 SBSC_SDCR_A, SBSC_SDCR_D2 - mov.l CCR_A, r1 - mov.l CCR_D, r0 - mov.l r0, @r1 + write32 CCR_A, CCR_D - ! BL bit off (init = ON) (?!?) + ! BL bit off (init = ON) (?!?) stc sr, r0 ! BL bit off(init=ON) mov.l SR_MASK_D, r1 @@ -211,7 +152,7 @@ SBSC_SDMR3_D: .long 0x00 CMNCR_A: .long CMNCR CS0BCR_A: .long CS0BCR CS4BCR_A: .long CS4BCR -CS5ABCR_A: .long CS5ABCR +CS5ABCR_A: .long CS5ABCR CS5BBCR_A: .long CS5BBCR CS6ABCR_A: .long CS6ABCR CS6BBCR_A: .long CS6BBCR diff --git a/board/renesas/r2dplus/lowlevel_init.S b/board/renesas/r2dplus/lowlevel_init.S index 28d2b3769a..76d3cfc408 100644 --- a/board/renesas/r2dplus/lowlevel_init.S +++ b/board/renesas/r2dplus/lowlevel_init.S @@ -8,6 +8,7 @@ #include #include +#include .global lowlevel_init .text @@ -15,98 +16,56 @@ lowlevel_init: - mov.l CCR_A, r1 - mov.l CCR_D_D, r0 - mov.l r0,@r1 + write32 CCR_A, CCR_D_D - mov.l MMUCR_A,r1 - mov.l MMUCR_D,r0 - mov.l r0,@r1 + write32 MMUCR_A, MMUCR_D - mov.l BCR1_A,r1 - mov.l BCR1_D,r0 - mov.l r0,@r1 + write32 BCR1_A, BCR1_D - mov.l BCR2_A,r1 - mov.l BCR2_D,r0 - mov.w r0,@r1 + write16 BCR2_A, BCR2_D - mov.l BCR3_A,r1 - mov.l BCR3_D,r0 - mov.w r0,@r1 + write16 BCR3_A, BCR3_D - mov.l BCR4_A,r1 - mov.l BCR4_D,r0 - mov.l r0,@r1 + write32 BCR4_A, BCR4_D - mov.l WCR1_A,r1 - mov.l WCR1_D,r0 - mov.l r0,@r1 + write32 WCR1_A, WCR1_D - mov.l WCR2_A,r1 - mov.l WCR2_D,r0 - mov.l r0,@r1 + write32 WCR2_A, WCR2_D - mov.l WCR3_A,r1 - mov.l WCR3_D,r0 - mov.l r0,@r1 + write32 WCR3_A, WCR3_D - mov.l PCR_A,r1 - mov.l PCR_D,r0 - mov.w r0,@r1 + write16 PCR_A, PCR_D - mov.l LED_A,r1 - mov #0xff,r0 - mov.w r0,@r1 + write16 LED_A, LED_D - mov.l MCR_A,r1 - mov.l MCR_D1,r0 - mov.l r0,@r1 + write32 MCR_A, MCR_D1 - mov.l RTCNT_A,r1 - mov.l RTCNT_D,r0 - mov.w r0,@r1 + write16 RTCNT_A, RTCNT_D - mov.l RTCOR_A,r1 - mov.l RTCOR_D,r0 - mov.w r0,@r1 + write16 RTCOR_A, RTCOR_D - mov.l RFCR_A,r1 - mov.l RFCR_D,r0 - mov.w r0,@r1 + write16 RFCR_A, RFCR_D - mov.l RTCSR_A,r1 - mov.l RTCSR_D,r0 - mov.w r0,@r1 + write16 RTCSR_A, RTCSR_D - mov.l SDMR3_A,r1 - mov #0x55,r0 - mov.b r0,@r1 + write8 SDMR3_A, SDMR3_D0 /* Wait DRAM refresh 30 times */ - mov.l RFCR_A,r1 - mov #30,r3 + mov.l RFCR_A, r1 + mov #30, r3 1: - mov.w @r1,r0 - extu.w r0,r2 - cmp/hi r3,r2 + mov.w @r1, r0 + extu.w r0, r2 + cmp/hi r3, r2 bf 1b - mov.l MCR_A,r1 - mov.l MCR_D2,r0 - mov.l r0,@r1 + write32 MCR_A, MCR_D2 - mov.l SDMR3_A,r1 - mov #0,r0 - mov.b r0,@r1 + write8 SDMR3_A, SDMR3_D1 - mov.l IRLMASK_A,r1 - mov.l IRLMASK_D,r0 - mov.l r0,@r1 + write32 IRLMASK_A, IRLMASK_D - mov.l CCR_A, r1 - mov.l CCR_D_E, r0 - mov.l r0, @r1 + write32 CCR_A, CCR_D_E rts nop @@ -133,6 +92,7 @@ WCR2_D: .long 0xcff86fbf WCR3_A: .long WCR3 /* WCR3 Address */ WCR3_D: .long 0x07777707 LED_A: .long 0x04000036 /* LED Address */ +LED_D: .long 0xFF /* LED Data */ RTCNT_A: .long RTCNT /* RTCNT Address */ RTCNT_D: .long 0xA500 /* RTCNT Write Code A5h Data 00h */ RTCOR_A: .long RTCOR /* RTCOR Address */ @@ -140,7 +100,8 @@ RTCOR_D: .long 0xA534 /* RTCOR Write Code */ RTCSR_A: .long RTCSR /* RTCSR Address */ RTCSR_D: .long 0xA510 /* RTCSR Write Code */ SDMR3_A: .long 0xFF9400CC /* SDMR3 Address */ -SDMR3_D: .long 0x55 +SDMR3_D0: .long 0x55 +SDMR3_D1: .long 0x00 MCR_A: .long MCR /* MCR Address */ MCR_D1: .long 0x081901F4 /* MRSET:'0' */ MCR_D2: .long 0x481901F4 /* MRSET:'1' */ diff --git a/board/renesas/r7780mp/lowlevel_init.S b/board/renesas/r7780mp/lowlevel_init.S index ab0499a3a2..bbea621920 100644 --- a/board/renesas/r7780mp/lowlevel_init.S +++ b/board/renesas/r7780mp/lowlevel_init.S @@ -22,13 +22,14 @@ #include #include #include +#include /* - * Board specific low level init code, called _very_ early in the - * startup sequence. Relocation to SDRAM has not happened yet, no - * stack is available, bss section has not been initialised, etc. + * Board specific low level init code, called _very_ early in the + * startup sequence. Relocation to SDRAM has not happened yet, no + * stack is available, bss section has not been initialised, etc. * - * (Note: As no stack is available, no subroutines can be called...). + * (Note: As no stack is available, no subroutines can be called...). */ .global lowlevel_init @@ -38,63 +39,36 @@ lowlevel_init: - mov.l CCR_A, r1 /* Address of Cache Control Register */ - mov.l CCR_D, r0 /* Instruction Cache Invalidate */ - mov.l r0, @r1 + write32 CCR_A, CCR_D /* Address of Cache Control Register */ + /* Instruction Cache Invalidate */ - mov.l FRQCR_A, r1 /* Frequency control register */ - mov.l FRQCR_D, r0 - mov.l r0, @r1 + write32 FRQCR_A, FRQCR_D /* Frequency control register */ /* pin_multi_setting */ - mov.l BBG_PMMR_A,r1 - mov.l BBG_PMMR_D_PMSR1,r0 - mov.l r0,@r1 + write32 BBG_PMMR_A, BBG_PMMR_D_PMSR1 - mov.l BBG_PMSR1_A,r1 - mov.l BBG_PMSR1_D,r0 - mov.l r0,@r1 + write32 BBG_PMSR1_A, BBG_PMSR1_D - mov.l BBG_PMMR_A,r1 - mov.l BBG_PMMR_D_PMSR2,r0 - mov.l r0,@r1 + write32 BBG_PMMR_A, BBG_PMMR_D_PMSR2 - mov.l BBG_PMSR2_A,r1 - mov.l BBG_PMSR2_D,r0 - mov.l r0,@r1 + write32 BBG_PMSR2_A, BBG_PMSR2_D - mov.l BBG_PMMR_A,r1 - mov.l BBG_PMMR_D_PMSR3,r0 - mov.l r0,@r1 + write32 BBG_PMMR_A, BBG_PMMR_D_PMSR3 - mov.l BBG_PMSR3_A,r1 - mov.l BBG_PMSR3_D,r0 - mov.l r0,@r1 + write32 BBG_PMSR3_A, BBG_PMSR3_D - mov.l BBG_PMMR_A,r1 - mov.l BBG_PMMR_D_PMSR4,r0 - mov.l r0,@r1 + write32 BBG_PMMR_A, BBG_PMMR_D_PMSR4 - mov.l BBG_PMSR4_A,r1 - mov.l BBG_PMSR4_D,r0 - mov.l r0,@r1 + write32 BBG_PMSR4_A, BBG_PMSR4_D - mov.l BBG_PMMR_A,r1 - mov.l BBG_PMMR_D_PMSRG,r0 - mov.l r0,@r1 + write32 BBG_PMMR_A, BBG_PMMR_D_PMSRG - mov.l BBG_PMSRG_A,r1 - mov.l BBG_PMSRG_D,r0 - mov.l r0,@r1 + write32 BBG_PMSRG_A, BBG_PMSRG_D /* cpg_setting */ - mov.l FRQCR_A,r1 - mov.l FRQCR_D,r0 - mov.l r0,@r1 + write32 FRQCR_A, FRQCR_D - mov.l DLLCSR_A,r1 - mov.l DLLCSR_D,r0 - mov.l r0,@r1 + write32 DLLCSR_A, DLLCSR_D nop nop @@ -108,111 +82,79 @@ lowlevel_init: nop /* wait 200us */ - mov.l REPEAT0_R3,r3 - mov #0,r2 + mov.l REPEAT0_R3, r3 + mov #0, r2 repeat0: - add #1,r2 - cmp/hs r3,r2 - bf repeat0 + add #1, r2 + cmp/hs r3, r2 + bf repeat0 nop /* bsc_setting */ - mov.l MMSELR_A,r1 - mov.l MMSELR_D,r0 - mov.l r0,@r1 + write32 MMSELR_A, MMSELR_D - mov.l BCR_A,r1 - mov.l BCR_D,r0 - mov.l r0,@r1 + write32 BCR_A, BCR_D - mov.l CS0BCR_A,r1 - mov.l CS0BCR_D,r0 - mov.l r0,@r1 + write32 CS0BCR_A, CS0BCR_D - mov.l CS1BCR_A,r1 - mov.l CS1BCR_D,r0 - mov.l r0,@r1 + write32 CS1BCR_A, CS1BCR_D - mov.l CS2BCR_A,r1 - mov.l CS2BCR_D,r0 - mov.l r0,@r1 + write32 CS2BCR_A, CS2BCR_D - mov.l CS4BCR_A,r1 - mov.l CS4BCR_D,r0 - mov.l r0,@r1 + write32 CS4BCR_A, CS4BCR_D - mov.l CS5BCR_A,r1 - mov.l CS5BCR_D,r0 - mov.l r0,@r1 + write32 CS5BCR_A, CS5BCR_D - mov.l CS6BCR_A,r1 - mov.l CS6BCR_D,r0 - mov.l r0,@r1 + write32 CS6BCR_A, CS6BCR_D - mov.l CS0WCR_A,r1 - mov.l CS0WCR_D,r0 - mov.l r0,@r1 + write32 CS0WCR_A, CS0WCR_D - mov.l CS1WCR_A,r1 - mov.l CS1WCR_D,r0 - mov.l r0,@r1 + write32 CS1WCR_A, CS1WCR_D - mov.l CS2WCR_A,r1 - mov.l CS2WCR_D,r0 - mov.l r0,@r1 + write32 CS2WCR_A, CS2WCR_D - mov.l CS4WCR_A,r1 - mov.l CS4WCR_D,r0 - mov.l r0,@r1 + write32 CS4WCR_A, CS4WCR_D - mov.l CS5WCR_A,r1 - mov.l CS5WCR_D,r0 - mov.l r0,@r1 + write32 CS5WCR_A, CS5WCR_D - mov.l CS6WCR_A,r1 - mov.l CS6WCR_D,r0 - mov.l r0,@r1 + write32 CS6WCR_A, CS6WCR_D - mov.l CS5PCR_A,r1 - mov.l CS5PCR_D,r0 - mov.l r0,@r1 + write32 CS5PCR_A, CS5PCR_D - mov.l CS6PCR_A,r1 - mov.l CS6PCR_D,r0 - mov.l r0,@r1 + write32 CS6PCR_A, CS6PCR_D /* ddr_setting */ /* wait 200us */ - mov.l REPEAT0_R3,r3 - mov #0,r2 + mov.l REPEAT0_R3, r3 + mov #0, r2 repeat1: - add #1,r2 - cmp/hs r3,r2 - bf repeat1 + add #1, r2 + cmp/hs r3, r2 + bf repeat1 nop - mov.l MIM_U_A,r0 - mov.l MIM_U_D,r1 + mov.l MIM_U_A, r0 + mov.l MIM_U_D, r1 synco - mov.l r1,@r0 + mov.l r1, @r0 synco - mov.l MIM_L_A,r0 - mov.l MIM_L_D0,r1 + mov.l MIM_L_A, r0 + mov.l MIM_L_D0, r1 synco - mov.l r1,@r0 + mov.l r1, @r0 synco - mov.l STR_L_A,r0 - mov.l STR_L_D,r1 + mov.l STR_L_A, r0 + mov.l STR_L_D, r1 synco - mov.l r1,@r0 + mov.l r1, @r0 synco - mov.l SDR_L_A,r0 - mov.l SDR_L_D,r1 + mov.l SDR_L_A, r0 + mov.l SDR_L_D, r1 synco - mov.l r1,@r0 + mov.l r1, @r0 synco nop @@ -220,193 +162,193 @@ repeat1: nop nop - mov.l SCR_L_A,r0 - mov.l SCR_L_D0,r1 + mov.l SCR_L_A, r0 + mov.l SCR_L_D0, r1 synco - mov.l r1,@r0 + mov.l r1, @r0 synco - mov.l SCR_L_A,r0 - mov.l SCR_L_D1,r1 + mov.l SCR_L_A, r0 + mov.l SCR_L_D1, r1 synco - mov.l r1,@r0 + mov.l r1, @r0 synco nop nop nop - mov.l EMRS_A,r0 - mov.l EMRS_D,r1 + mov.l EMRS_A, r0 + mov.l EMRS_D, r1 synco - mov.l r1,@r0 + mov.l r1, @r0 synco nop nop nop - mov.l MRS1_A,r0 - mov.l MRS1_D,r1 + mov.l MRS1_A, r0 + mov.l MRS1_D, r1 synco - mov.l r1,@r0 + mov.l r1, @r0 synco nop nop nop - mov.l SCR_L_A,r0 - mov.l SCR_L_D2,r1 + mov.l SCR_L_A, r0 + mov.l SCR_L_D2, r1 synco - mov.l r1,@r0 + mov.l r1, @r0 synco nop nop nop - mov.l SCR_L_A,r0 - mov.l SCR_L_D3,r1 + mov.l SCR_L_A, r0 + mov.l SCR_L_D3, r1 synco - mov.l r1,@r0 + mov.l r1, @r0 synco nop nop nop - mov.l SCR_L_A,r0 - mov.l SCR_L_D4,r1 + mov.l SCR_L_A, r0 + mov.l SCR_L_D4, r1 synco - mov.l r1,@r0 + mov.l r1, @r0 synco nop nop nop - mov.l MRS2_A,r0 - mov.l MRS2_D,r1 + mov.l MRS2_A, r0 + mov.l MRS2_D, r1 synco - mov.l r1,@r0 + mov.l r1, @r0 synco nop nop nop - mov.l SCR_L_A,r0 - mov.l SCR_L_D5,r1 + mov.l SCR_L_A, r0 + mov.l SCR_L_D5, r1 synco - mov.l r1,@r0 + mov.l r1, @r0 synco /* wait 200us */ - mov.l REPEAT0_R1,r3 - mov #0,r2 + mov.l REPEAT0_R1, r3 + mov #0, r2 repeat2: - add #1,r2 - cmp/hs r3,r2 - bf repeat2 + add #1, r2 + cmp/hs r3, r2 + bf repeat2 synco - mov.l MIM_L_A,r0 - mov.l MIM_L_D1,r1 + mov.l MIM_L_A, r0 + mov.l MIM_L_D1, r1 synco - mov.l r1,@r0 + mov.l r1, @r0 synco rts nop .align 4 -RWTCSR_D_1: .word 0xA507 -RWTCSR_D_2: .word 0xA507 -RWTCNT_D: .word 0x5A00 +RWTCSR_D_1: .word 0xA507 +RWTCSR_D_2: .word 0xA507 +RWTCNT_D: .word 0x5A00 .align 2 -BBG_PMMR_A: .long 0xFF800010 -BBG_PMSR1_A: .long 0xFF800014 -BBG_PMSR2_A: .long 0xFF800018 -BBG_PMSR3_A: .long 0xFF80001C -BBG_PMSR4_A: .long 0xFF800020 -BBG_PMSRG_A: .long 0xFF800024 - -BBG_PMMR_D_PMSR1: .long 0xffffbffd -BBG_PMSR1_D: .long 0x00004002 -BBG_PMMR_D_PMSR2: .long 0xfc21a7ff -BBG_PMSR2_D: .long 0x03de5800 -BBG_PMMR_D_PMSR3: .long 0xfffffff8 -BBG_PMSR3_D: .long 0x00000007 -BBG_PMMR_D_PMSR4: .long 0xdffdfff9 -BBG_PMSR4_D: .long 0x20020006 -BBG_PMMR_D_PMSRG: .long 0xffffffff -BBG_PMSRG_D: .long 0x00000000 - -FRQCR_A: .long FRQCR -DLLCSR_A: .long 0xffc40010 -FRQCR_D: .long 0x40233035 -DLLCSR_D: .long 0x00000000 +BBG_PMMR_A: .long 0xFF800010 +BBG_PMSR1_A: .long 0xFF800014 +BBG_PMSR2_A: .long 0xFF800018 +BBG_PMSR3_A: .long 0xFF80001C +BBG_PMSR4_A: .long 0xFF800020 +BBG_PMSRG_A: .long 0xFF800024 + +BBG_PMMR_D_PMSR1: .long 0xffffbffd +BBG_PMSR1_D: .long 0x00004002 +BBG_PMMR_D_PMSR2: .long 0xfc21a7ff +BBG_PMSR2_D: .long 0x03de5800 +BBG_PMMR_D_PMSR3: .long 0xfffffff8 +BBG_PMSR3_D: .long 0x00000007 +BBG_PMMR_D_PMSR4: .long 0xdffdfff9 +BBG_PMSR4_D: .long 0x20020006 +BBG_PMMR_D_PMSRG: .long 0xffffffff +BBG_PMSRG_D: .long 0x00000000 + +FRQCR_A: .long FRQCR +DLLCSR_A: .long 0xffc40010 +FRQCR_D: .long 0x40233035 +DLLCSR_D: .long 0x00000000 /* for DDR-SDRAM */ -MIM_U_A: .long MIM_1 -MIM_L_A: .long MIM_2 -SCR_U_A: .long SCR_1 -SCR_L_A: .long SCR_2 -STR_U_A: .long STR_1 -STR_L_A: .long STR_2 -SDR_U_A: .long SDR_1 -SDR_L_A: .long SDR_2 - -EMRS_A: .long 0xFEC02000 -MRS1_A: .long 0xFEC00B08 -MRS2_A: .long 0xFEC00308 - -MIM_U_D: .long 0x00004000 -MIM_L_D0: .long 0x03e80009 -MIM_L_D1: .long 0x03e80209 -SCR_L_D0: .long 0x3 -SCR_L_D1: .long 0x2 -SCR_L_D2: .long 0x2 -SCR_L_D3: .long 0x4 -SCR_L_D4: .long 0x4 -SCR_L_D5: .long 0x0 -STR_L_D: .long 0x000f0000 -SDR_L_D: .long 0x00000400 -EMRS_D: .long 0x0 -MRS1_D: .long 0x0 -MRS2_D: .long 0x0 +MIM_U_A: .long MIM_1 +MIM_L_A: .long MIM_2 +SCR_U_A: .long SCR_1 +SCR_L_A: .long SCR_2 +STR_U_A: .long STR_1 +STR_L_A: .long STR_2 +SDR_U_A: .long SDR_1 +SDR_L_A: .long SDR_2 + +EMRS_A: .long 0xFEC02000 +MRS1_A: .long 0xFEC00B08 +MRS2_A: .long 0xFEC00308 + +MIM_U_D: .long 0x00004000 +MIM_L_D0: .long 0x03e80009 +MIM_L_D1: .long 0x03e80209 +SCR_L_D0: .long 0x3 +SCR_L_D1: .long 0x2 +SCR_L_D2: .long 0x2 +SCR_L_D3: .long 0x4 +SCR_L_D4: .long 0x4 +SCR_L_D5: .long 0x0 +STR_L_D: .long 0x000f0000 +SDR_L_D: .long 0x00000400 +EMRS_D: .long 0x0 +MRS1_D: .long 0x0 +MRS2_D: .long 0x0 /* Cache Controller */ -CCR_A: .long CCR -MMUCR_A: .long MMUCR -RWTCNT_A: .long WTCNT +CCR_A: .long CCR +MMUCR_A: .long MMUCR +RWTCNT_A: .long WTCNT -CCR_D: .long 0x0000090b -CCR_D_2: .long 0x00000103 -MMUCR_D: .long 0x00000004 -MSTPCR0_D: .long 0x00001001 -MSTPCR2_D: .long 0xffffffff +CCR_D: .long 0x0000090b +CCR_D_2: .long 0x00000103 +MMUCR_D: .long 0x00000004 +MSTPCR0_D: .long 0x00001001 +MSTPCR2_D: .long 0xffffffff /* local Bus State Controller */ -MMSELR_A: .long MMSELR -BCR_A: .long BCR -CS0BCR_A: .long CS0BCR -CS1BCR_A: .long CS1BCR -CS2BCR_A: .long CS2BCR -CS4BCR_A: .long CS4BCR -CS5BCR_A: .long CS5BCR -CS6BCR_A: .long CS6BCR -CS0WCR_A: .long CS0WCR -CS1WCR_A: .long CS1WCR -CS2WCR_A: .long CS2WCR -CS4WCR_A: .long CS4WCR -CS5WCR_A: .long CS5WCR -CS6WCR_A: .long CS6WCR -CS5PCR_A: .long CS5PCR -CS6PCR_A: .long CS6PCR +MMSELR_A: .long MMSELR +BCR_A: .long BCR +CS0BCR_A: .long CS0BCR +CS1BCR_A: .long CS1BCR +CS2BCR_A: .long CS2BCR +CS4BCR_A: .long CS4BCR +CS5BCR_A: .long CS5BCR +CS6BCR_A: .long CS6BCR +CS0WCR_A: .long CS0WCR +CS1WCR_A: .long CS1WCR +CS2WCR_A: .long CS2WCR +CS4WCR_A: .long CS4WCR +CS5WCR_A: .long CS5WCR +CS6WCR_A: .long CS6WCR +CS5PCR_A: .long CS5PCR +CS6PCR_A: .long CS6PCR MMSELR_D: .long 0xA5A50003 BCR_D: .long 0x00000000 @@ -425,5 +367,5 @@ CS6WCR_D: .long 0x77777703 CS5PCR_D: .long 0x77000000 CS6PCR_D: .long 0x77000000 -REPEAT0_R3: .long 0x00002000 -REPEAT0_R1: .long 0x0000200 +REPEAT0_R3: .long 0x00002000 +REPEAT0_R1: .long 0x0000200 diff --git a/board/renesas/rsk7203/Makefile b/board/renesas/rsk7203/Makefile index 7365d19301..5412010ae6 100644 --- a/board/renesas/rsk7203/Makefile +++ b/board/renesas/rsk7203/Makefile @@ -26,6 +26,10 @@ LIB = lib$(BOARD).a OBJS := rsk7203.o SOBJS := lowlevel_init.o +LIB := $(addprefix $(obj),$(LIB)) +OBJS := $(addprefix $(obj),$(OBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) diff --git a/board/renesas/rsk7203/lowlevel_init.S b/board/renesas/rsk7203/lowlevel_init.S index e4d6f9e7df..7b9ecd89c3 100644 --- a/board/renesas/rsk7203/lowlevel_init.S +++ b/board/renesas/rsk7203/lowlevel_init.S @@ -21,6 +21,7 @@ #include #include +#include .global lowlevel_init @@ -29,153 +30,89 @@ lowlevel_init: /* Cache setting */ - mov.l CCR1_A ,r1 - mov.l CCR1_D ,r0 - mov.l r0,@r1 + write32 CCR1_A ,CCR1_D /* ConfigurePortPins */ - mov.l PECRL3_A, r1 - mov.l PECRL3_D, r0 - mov.w r0,@r1 + write16 PECRL3_A, PECRL3_D - mov.l PCCRL4_A, r1 - mov.l PCCRL4_D0, r0 - mov.w r0,@r1 + write16 PCCRL4_A, PCCRL4_D0 - mov.l PECRL4_A, r1 - mov.l PECRL4_D0, r0 - mov.w r0,@r1 + write16 PECRL4_A, PECRL4_D0 - mov.l PEIORL_A, r1 - mov.l PEIORL_D0, r0 - mov.w r0,@r1 + write16 PEIORL_A, PEIORL_D0 - mov.l PCIORL_A, r1 - mov.l PCIORL_D, r0 - mov.w r0,@r1 + write16 PCIORL_A, PCIORL_D - mov.l PFCRH2_A, r1 - mov.l PFCRH2_D, r0 - mov.w r0,@r1 + write16 PFCRH2_A, PFCRH2_D - mov.l PFCRH3_A, r1 - mov.l PFCRH3_D, r0 - mov.w r0,@r1 + write16 PFCRH3_A, PFCRH3_D - mov.l PFCRH1_A, r1 - mov.l PFCRH1_D, r0 - mov.w r0,@r1 + write16 PFCRH1_A, PFCRH1_D - mov.l PFIORH_A, r1 - mov.l PFIORH_D, r0 - mov.w r0,@r1 + write16 PFIORH_A, PFIORH_D - mov.l PECRL1_A, r1 - mov.l PECRL1_D0, r0 - mov.w r0,@r1 + write16 PECRL1_A, PECRL1_D0 - mov.l PEIORL_A, r1 - mov.l PEIORL_D1, r0 - mov.w r0,@r1 + write16 PEIORL_A, PEIORL_D1 /* Configure Operating Frequency */ - mov.l WTCSR_A ,r1 - mov.l WTCSR_D0 ,r0 - mov.w r0,@r1 + write16 WTCSR_A, WTCSR_D0 - mov.l WTCSR_A ,r1 - mov.l WTCSR_D1 ,r0 - mov.w r0,@r1 + write16 WTCSR_A, WTCSR_D1 - mov.l WTCNT_A ,r1 - mov.l WTCNT_D ,r0 - mov.w r0,@r1 + write16 WTCNT_A, WTCNT_D /* Set clock mode*/ - mov.l FRQCR_A,r1 - mov.l FRQCR_D,r0 - mov.w r0,@r1 + write16 FRQCR_A, FRQCR_D /* Configure Bus And Memory */ init_bsc_cs0: - mov.l PCCRL4_A,r1 - mov.l PCCRL4_D1,r0 - mov.w r0,@r1 + write16 PCCRL4_A, PCCRL4_D1 - mov.l PECRL1_A,r1 - mov.l PECRL1_D1,r0 - mov.w r0,@r1 + write16 PECRL1_A, PECRL1_D1 - mov.l CMNCR_A,r1 - mov.l CMNCR_D,r0 - mov.l r0,@r1 + write32 CMNCR_A, CMNCR_D - mov.l SC0BCR_A,r1 - mov.l SC0BCR_D,r0 - mov.l r0,@r1 + write32 SC0BCR_A, SC0BCR_D - mov.l CS0WCR_A,r1 - mov.l CS0WCR_D,r0 - mov.l r0,@r1 + write32 CS0WCR_A, CS0WCR_D init_bsc_cs1: - mov.l PECRL4_A,r1 - mov.l PECRL4_D1,r0 - mov.w r0,@r1 + write16 PECRL4_A, PECRL4_D1 - mov.l CS1WCR_A,r1 - mov.l CS1WCR_D,r0 - mov.l r0,@r1 + write32 CS1WCR_A, CS1WCR_D init_sdram: - mov.l PCCRL2_A,r1 - mov.l PCCRL2_D,r0 - mov.w r0,@r1 + write16 PCCRL2_A, PCCRL2_D - mov.l PCCRL4_A,r1 - mov.l PCCRL4_D2,r0 - mov.w r0,@r1 + write16 PCCRL4_A, PCCRL4_D2 - mov.l PCCRL1_A,r1 - mov.l PCCRL1_D,r0 - mov.w r0,@r1 + write16 PCCRL1_A, PCCRL1_D - mov.l PCCRL3_A,r1 - mov.l PCCRL3_D,r0 - mov.w r0,@r1 + write16 PCCRL3_A, PCCRL3_D - mov.l CS3BCR_A,r1 - mov.l CS3BCR_D,r0 - mov.l r0,@r1 + write32 CS3BCR_A, CS3BCR_D - mov.l CS3WCR_A,r1 - mov.l CS3WCR_D,r0 - mov.l r0,@r1 + write32 CS3WCR_A, CS3WCR_D - mov.l SDCR_A,r1 - mov.l SDCR_D,r0 - mov.l r0,@r1 + write32 SDCR_A, SDCR_D - mov.l RTCOR_A,r1 - mov.l RTCOR_D,r0 - mov.l r0,@r1 + write32 RTCOR_A, RTCOR_D - mov.l RTCSR_A,r1 - mov.l RTCSR_D,r0 - mov.l r0,@r1 + write32 RTCSR_A, RTCSR_D /* wait 200us */ - mov.l REPEAT_D,r3 - mov #0,r2 + mov.l REPEAT_D, r3 + mov #0, r2 repeat0: - add #1,r2 - cmp/hs r3,r2 - bf repeat0 + add #1, r2 + cmp/hs r3, r2 + bf repeat0 nop - mov.l SDRAM_MODE, r1 - mov #0,r0 - mov.l r0, @r1 + mov.l SDRAM_MODE, r1 + mov #0, r0 + mov.l r0, @r1 nop rts @@ -208,8 +145,8 @@ PECRL1_D0: .long 0x00000033 WTCSR_A: .long 0xFFFE0000 -WTCSR_D0: .long 0x0000A518 -WTCSR_D1: .long 0x0000A51D +WTCSR_D0: .long 0x0000A518 +WTCSR_D1: .long 0x0000A51D WTCNT_A: .long 0xFFFE0002 WTCNT_D: .long 0x00005A84 FRQCR_A: .long 0xFFFE0010 @@ -259,7 +196,7 @@ STBCR4_A: .long 0xFFFE040C STBCR4_D: .long 0x00000008 STBCR5_A: .long 0xFFFE0410 STBCR5_D: .long 0x00000000 -STBCR6_A: .long 0xFFFE0414 +STBCR6_A: .long 0xFFFE0414 STBCR6_D: .long 0x00000002 SDRAM_MODE: .long 0xFFFC5040 REPEAT_D: .long 0x00009C40 diff --git a/board/renesas/sh7763rdp/lowlevel_init.S b/board/renesas/sh7763rdp/lowlevel_init.S index 2a44eee1ad..3747bf6f89 100644 --- a/board/renesas/sh7763rdp/lowlevel_init.S +++ b/board/renesas/sh7763rdp/lowlevel_init.S @@ -25,6 +25,7 @@ #include #include +#include .global lowlevel_init @@ -33,218 +34,141 @@ lowlevel_init: - mov.l WDTCSR_A, r1 /* Watchdog Control / Status Register */ - mov.l WDTCSR_D, r0 - mov.l r0, @r1 + write32 WDTCSR_A, WDTCSR_D /* Watchdog Control / Status Register */ - mov.l WDTST_A, r1 /* Watchdog Stop Time Register */ - mov.l WDTST_D, r0 - mov.l r0, @r1 + write32 WDTST_A, WDTST_D /* Watchdog Stop Time Register */ - mov.l WDTBST_A, r1 /* 0xFFCC0008 (Watchdog Base Stop Time Register */ - mov.l WDTBST_D, r0 - mov.l r0, @r1 + write32 WDTBST_A, WDTBST_D /* + * 0xFFCC0008 + * Watchdog Base Stop Time Register + */ - mov.l CCR_A, r1 /* Address of Cache Control Register */ - mov.l CCR_CACHE_ICI_D, r0 /* Instruction Cache Invalidate */ - mov.l r0, @r1 + write32 CCR_A, CCR_CACHE_ICI_D /* Address of Cache Control Register */ + /* Instruction Cache Invalidate */ - mov.l MMUCR_A, r1 /* Address of MMU Control Register */ - mov.l MMU_CONTROL_TI_D, r0 /* TI == TLB Invalidate bit */ - mov.l r0, @r1 + write32 MMUCR_A, MMU_CONTROL_TI_D /* MMU Control Register */ + /* TI == TLB Invalidate bit */ - mov.l MSTPCR0_A, r1 /* Address of Power Control Register 0 */ - mov.l MSTPCR0_D, r0 - mov.l r0, @r1 + write32 MSTPCR0_A, MSTPCR0_D /* Address of Power Control Register 0 */ - mov.l MSTPCR1_A, r1 /*i Address of Power Control Register 1 */ - mov.l MSTPCR1_D, r0 - mov.l r0, @r1 + write32 MSTPCR1_A, MSTPCR1_D /* Address of Power Control Register 1 */ - mov.l RAMCR_A,r1 - mov.l RAMCR_D,r0 - mov.l r0, @r1 + write32 RAMCR_A, RAMCR_D - mov.l MMSELR_A,r1 - mov.l MMSELR_D,r0 + mov.l MMSELR_A, r1 + mov.l MMSELR_D, r0 synco mov.l r0, @r1 - mov.l @r1,r2 /* execute two reads after setting MMSELR*/ - mov.l @r1,r2 + mov.l @r1, r2 /* execute two reads after setting MMSELR */ + mov.l @r1, r2 synco /* issue memory read */ - mov.l DDRSD_START_A,r1 /* memory address to read*/ - mov.l @r1,r0 + mov.l DDRSD_START_A, r1 /* memory address to read*/ + mov.l @r1, r0 synco - mov.l MIM8_A,r1 - mov.l MIM8_D,r0 - mov.l r0,@r1 + write32 MIM8_A, MIM8_D - mov.l MIMC_A,r1 - mov.l MIMC_D1,r0 - mov.l r0,@r1 + write32 MIMC_A, MIMC_D1 - mov.l STRC_A,r1 - mov.l STRC_D,r0 - mov.l r0,@r1 + write32 STRC_A, STRC_D - mov.l SDR4_A,r1 - mov.l SDR4_D,r0 - mov.l r0,@r1 + write32 SDR4_A, SDR4_D - mov.l MIMC_A,r1 - mov.l MIMC_D2,r0 - mov.l r0,@r1 + write32 MIMC_A, MIMC_D2 nop nop nop - mov.l SCR4_A,r1 - mov.l SCR4_D3,r0 - mov.l r0,@r1 + write32 SCR4_A, SCR4_D3 - mov.l SCR4_A,r1 - mov.l SCR4_D2,r0 - mov.l r0,@r1 + write32 SCR4_A, SCR4_D2 - mov.l SDMR02000_A,r1 - mov.l SDMR02000_D,r0 - mov.l r0,@r1 + write32 SDMR02000_A, SDMR02000_D - mov.l SDMR00B08_A,r1 - mov.l SDMR00B08_D,r0 - mov.l r0,@r1 + write32 SDMR00B08_A, SDMR00B08_D - mov.l SCR4_A,r1 - mov.l SCR4_D2,r0 - mov.l r0,@r1 + write32 SCR4_A, SCR4_D2 - mov.l SCR4_A,r1 - mov.l SCR4_D4,r0 - mov.l r0,@r1 + write32 SCR4_A, SCR4_D4 nop nop nop nop - mov.l SCR4_A,r1 - mov.l SCR4_D4,r0 - mov.l r0,@r1 + write32 SCR4_A, SCR4_D4 nop nop nop nop - mov.l SDMR00308_A,r1 - mov.l SDMR00308_D,r0 - mov.l r0,@r1 + write32 SDMR00308_A, SDMR00308_D - mov.l MIMC_A,r1 - mov.l MIMC_D3,r0 - mov.l r0,@r1 + write32 MIMC_A, MIMC_D3 - mov.l SCR4_A,r1 - mov.l SCR4_D1,r0 - mov.l DELAY60_D,r3 + mov.l SCR4_A, r1 + mov.l SCR4_D1, r0 + mov.l DELAY60_D, r3 delay_loop_60: - mov.l r0,@r1 + mov.l r0, @r1 dt r3 bf delay_loop_60 nop - mov.l CCR_A, r1 /* Address of Cache Control Register */ - mov.l CCR_CACHE_D_2, r0 - mov.l r0, @r1 + write32 CCR_A, CCR_CACHE_D_2 /* Address of Cache Control Register */ bsc_init: - mov.l BCR_A, r1 - mov.l BCR_D, r0 - mov.l r0, @r1 + write32 BCR_A, BCR_D - mov.l CS0BCR_A, r1 - mov.l CS0BCR_D, r0 - mov.l r0, @r1 + write32 CS0BCR_A, CS0BCR_D - mov.l CS1BCR_A,r1 - mov.l CS1BCR_D,r0 - mov.l r0,@r1 + write32 CS1BCR_A, CS1BCR_D - mov.l CS2BCR_A, r1 - mov.l CS2BCR_D, r0 - mov.l r0, @r1 + write32 CS2BCR_A, CS2BCR_D - mov.l CS4BCR_A, r1 - mov.l CS4BCR_D, r0 - mov.l r0, @r1 + write32 CS4BCR_A, CS4BCR_D - mov.l CS5BCR_A, r1 - mov.l CS5BCR_D, r0 - mov.l r0, @r1 + write32 CS5BCR_A, CS5BCR_D - mov.l CS6BCR_A, r1 - mov.l CS6BCR_D, r0 - mov.l r0, @r1 + write32 CS6BCR_A, CS6BCR_D - mov.l CS0WCR_A, r1 - mov.l CS0WCR_D, r0 - mov.l r0, @r1 + write32 CS0WCR_A, CS0WCR_D - mov.l CS1WCR_A, r1 - mov.l CS1WCR_D, r0 - mov.l r0, @r1 + write32 CS1WCR_A, CS1WCR_D - mov.l CS2WCR_A, r1 - mov.l CS2WCR_D, r0 - mov.l r0, @r1 + write32 CS2WCR_A, CS2WCR_D - mov.l CS4WCR_A, r1 - mov.l CS4WCR_D, r0 - mov.l r0, @r1 + write32 CS4WCR_A, CS4WCR_D - mov.l CS5WCR_A, r1 - mov.l CS5WCR_D, r0 - mov.l r0, @r1 + write32 CS5WCR_A, CS5WCR_D - mov.l CS6WCR_A, r1 - mov.l CS6WCR_D, r0 - mov.l r0, @r1 + write32 CS6WCR_A, CS6WCR_D - mov.l CS5PCR_A, r1 - mov.l CS5PCR_D, r0 - mov.l r0, @r1 + write32 CS5PCR_A, CS5PCR_D - mov.l CS6PCR_A, r1 - mov.l CS6PCR_D, r0 - mov.l r0, @r1 + write32 CS6PCR_A, CS6PCR_D - mov.l DELAY200_D,r3 + mov.l DELAY200_D, r3 delay_loop_200: dt r3 bf delay_loop_200 nop - mov.l PSEL0_A,r1 - mov.l PSEL0_D,r0 - mov.w r0,@r1 + write16 PSEL0_A, PSEL0_D - mov.l PSEL1_A,r1 - mov.l PSEL1_D,r0 - mov.w r0,@r1 + write16 PSEL1_A, PSEL1_D - mov.l ICR0_A,r1 - mov.l ICR0_D,r0 - mov.l r0,@r1 + write32 ICR0_A, ICR0_D stc sr, r0 /* BL bit off(init=ON) */ - mov.l SR_MASK_D, r1 + mov.l SR_MASK_D, r1 and r1, r0 ldc r0, sr @@ -321,7 +245,7 @@ CS4BCR_D: .long 0x77777670 CS5BCR_D: .long 0x77777670 CS6BCR_D: .long 0x77777670 CS0WCR_D: .long 0x7777770F -CS1WCR_D: .long 0x22000002 +CS1WCR_D: .long 0x22000002 CS2WCR_D: .long 0x7777770F CS4WCR_D: .long 0x7777770F CS5WCR_D: .long 0x7777770F diff --git a/board/renesas/sh7785lcr/lowlevel_init.S b/board/renesas/sh7785lcr/lowlevel_init.S index 50e1789cc5..f5ebeb9a7d 100644 --- a/board/renesas/sh7785lcr/lowlevel_init.S +++ b/board/renesas/sh7785lcr/lowlevel_init.S @@ -19,33 +19,7 @@ #include #include #include - -.macro write32, addr, data - mov.l \addr ,r1 - mov.l \data ,r0 - mov.l r0, @r1 -.endm - -.macro write16, addr, data - mov.l \addr ,r1 - mov.l \data ,r0 - mov.w r0, @r1 -.endm - -.macro write8, addr, data - mov.l \addr ,r1 - mov.l \data ,r0 - mov.b r0, @r1 -.endm - -.macro wait_timer, time - mov.l \time ,r3 -1: - nop - tst r3, r3 - bf/s 1b - dt r3 -.endm +#include #include @@ -305,7 +279,7 @@ CS4WCR_D: .long 0x00101012 CS_USB_BCR_D: .long 0x11111200 CS_USB_WCR_D: .long 0x00020004 -/* SD setting : 32bit mode = CS3, 29bit mode = CS6 */ +/* SD setting : 32bit mode = CS3, 29bit mode = CS6 */ CS_SD_BCR_D: .long 0x00000300 CS_SD_WCR_D: .long 0x00030108 diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c index 8c073cb4bb..519b0f749d 100644 --- a/board/sbc8548/sbc8548.c +++ b/board/sbc8548/sbc8548.c @@ -126,7 +126,7 @@ local_bus_init(void) sys_info_t sysinfo; get_sys_info(&sysinfo); - clkdiv = (lbc->lcrr & 0x0f) * 2; + clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2; lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; gur->lbiuiplldcr1 = 0x00078080; diff --git a/board/sbc8641d/law.c b/board/sbc8641d/law.c index de47fcd634..760c6935de 100644 --- a/board/sbc8641d/law.c +++ b/board/sbc8641d/law.c @@ -45,14 +45,14 @@ struct law_entry law_table[] = { SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1), - SET_LAW(CONFIG_SYS_PCI1_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1), - SET_LAW(CONFIG_SYS_PCI2_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2), + SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1), + SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2), SET_LAW(0xf8000000, LAW_SIZE_2M, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_PCI1_IO_BASE, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1), - SET_LAW(CONFIG_SYS_PCI2_IO_BASE, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2), + SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1), + SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2), SET_LAW(0xfe000000, LAW_SIZE_32M, LAW_TRGT_IF_LBC), SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_2), - SET_LAW(CONFIG_SYS_RIO_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_RIO) + SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO) }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/sbc8641d/sbc8641d.c b/board/sbc8641d/sbc8641d.c index 1471e581e3..508bdc5dd8 100644 --- a/board/sbc8641d/sbc8641d.c +++ b/board/sbc8641d/sbc8641d.c @@ -247,14 +247,14 @@ void pci_init_board(void) /* outbound memory */ pci_set_region(r++, - CONFIG_SYS_PCI1_MEM_BASE, + CONFIG_SYS_PCI1_MEM_BUS, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ pci_set_region(r++, - CONFIG_SYS_PCI1_IO_BASE, + CONFIG_SYS_PCI1_IO_BUS, CONFIG_SYS_PCI1_IO_PHYS, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO); @@ -290,14 +290,14 @@ void pci_init_board(void) /* outbound memory */ pci_set_region(r++, - CONFIG_SYS_PCI2_MEM_BASE, + CONFIG_SYS_PCI2_MEM_BUS, CONFIG_SYS_PCI2_MEM_PHYS, CONFIG_SYS_PCI2_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ pci_set_region(r++, - CONFIG_SYS_PCI2_IO_BASE, + CONFIG_SYS_PCI2_IO_BUS, CONFIG_SYS_PCI2_IO_PHYS, CONFIG_SYS_PCI2_IO_SIZE, PCI_REGION_IO); diff --git a/board/socrates/socrates.c b/board/socrates/socrates.c index d83dc7d6a3..df9696e69a 100644 --- a/board/socrates/socrates.c +++ b/board/socrates/socrates.c @@ -156,7 +156,7 @@ void local_bus_init (void) uint lcrr = CONFIG_SYS_LBC_LCRR; get_sys_info (&sysinfo); - clkdiv = lbc->lcrr & 0x0f; + clkdiv = lbc->lcrr & LCRR_CLKDIV; lbc_mhz = sysinfo.freqSystemBus / 1000000 / clkdiv; /* Disable PLL bypass for Local Bus Clock >= 66 MHz */ diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c index 73f1d01bdf..cda8208eec 100644 --- a/board/tqc/tqm85xx/tqm85xx.c +++ b/board/tqc/tqm85xx/tqm85xx.c @@ -361,7 +361,7 @@ uint get_lbc_clock (void) { volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); sys_info_t sys_info; - ulong clkdiv = lbc->lcrr & 0x0f; + ulong clkdiv = lbc->lcrr & LCRR_CLKDIV; get_sys_info (&sys_info); diff --git a/board/xes/common/Makefile b/board/xes/common/Makefile new file mode 100644 index 0000000000..e7620f447f --- /dev/null +++ b/board/xes/common/Makefile @@ -0,0 +1,57 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)board/$(VENDOR)/common) +endif + +LIB = $(obj)lib$(VENDOR).a + +COBJS-$(CONFIG_FSL_PCI_INIT) += fsl_85xx_pci.o +COBJS-$(CONFIG_MPC8572) += fsl_8572_clk.o +COBJS-$(CONFIG_MPC85xx) += fsl_85xx_ddr.o +COBJS-$(CONFIG_NAND_ACTL) += actl_nand.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/xes/common/actl_nand.c b/board/xes/common/actl_nand.c new file mode 100644 index 0000000000..465aeb0991 --- /dev/null +++ b/board/xes/common/actl_nand.c @@ -0,0 +1,65 @@ +/* + * Copyright 2008 Extreme Engineering Solutions, Inc. + * + * This driver support NAND devices which have address lines + * connected as ALE and CLE inputs. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +/* + * Hardware specific access to control-lines + */ +static void nand_addr_hwcontrol(struct mtd_info *mtd, int cmd, uint ctrl) +{ + struct nand_chip *this = mtd->priv; + ulong IO_ADDR_W; + + if (ctrl & NAND_CTRL_CHANGE) { + IO_ADDR_W = (ulong)this->IO_ADDR_W; + + IO_ADDR_W &= ~(CONFIG_SYS_NAND_ACTL_CLE | + CONFIG_SYS_NAND_ACTL_ALE | + CONFIG_SYS_NAND_ACTL_NCE); + if (ctrl & NAND_CLE) + IO_ADDR_W |= CONFIG_SYS_NAND_ACTL_CLE; + if (ctrl & NAND_ALE) + IO_ADDR_W |= CONFIG_SYS_NAND_ACTL_ALE; + if (ctrl & NAND_NCE) + IO_ADDR_W |= CONFIG_SYS_NAND_ACTL_NCE; + + this->IO_ADDR_W = (void *)IO_ADDR_W; + } + + if (cmd != NAND_CMD_NONE) + writeb(cmd, this->IO_ADDR_W); +} + +int board_nand_init(struct nand_chip *nand) +{ + nand->ecc.mode = NAND_ECC_SOFT; + nand->cmd_ctrl = nand_addr_hwcontrol; + nand->chip_delay = CONFIG_SYS_NAND_ACTL_DELAY; + + return 0; +} diff --git a/board/xes/common/fsl_8572_clk.c b/board/xes/common/fsl_8572_clk.c new file mode 100644 index 0000000000..f5df2dae84 --- /dev/null +++ b/board/xes/common/fsl_8572_clk.c @@ -0,0 +1,51 @@ +/* + * Copyright 2008 Extreme Engineering Solutions, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +/* + * Return SYSCLK input frequency - 50 MHz or 66 MHz depending on POR config + */ +unsigned long get_board_sys_clk(ulong dummy) +{ + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 gpporcr = gur->gpporcr; + + if (gpporcr & 0x10000) + return 66666666; + else + return 50000000; +} + +/* + * Return DDR input clock - synchronous with SYSCLK or 66 MHz + */ +unsigned long get_board_ddr_clk(ulong dummy) +{ + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 ddr_ratio = ((gur->porpllsr) & 0x00003e00) >> 9; + + if (ddr_ratio == 0x7) + return get_board_sys_clk(dummy); + + return 66666666; +} diff --git a/board/xes/common/fsl_85xx_ddr.c b/board/xes/common/fsl_85xx_ddr.c new file mode 100644 index 0000000000..30b4767019 --- /dev/null +++ b/board/xes/common/fsl_85xx_ddr.c @@ -0,0 +1,93 @@ +/* + * Copyright 2008 Extreme Engineering Solutions, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) +extern void ddr_enable_ecc(unsigned int dram_size); +#endif + +phys_size_t initdram(int board_type) +{ + phys_size_t dram_size = fsl_ddr_sdram(); + + dram_size = setup_ddr_tlbs(dram_size / 0x100000); + + dram_size *= 0x100000; + +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) + /* Initialize and enable DDR ECC */ + ddr_enable_ecc(dram_size); +#endif + + return dram_size; +} + +#if defined(CONFIG_DDR_ECC) || (CONFIG_NUM_DDR_CONTROLLERS > 1) +void board_add_ram_info(int use_default) +{ +#if (CONFIG_NUM_DDR_CONTROLLERS > 1) + volatile ccsr_ddr_t *ddr1 = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); +#endif + + puts(" ("); + +#if (CONFIG_NUM_DDR_CONTROLLERS > 1) + /* Print interleaving information */ + if (ddr1->cs0_config & 0x20000000) { + switch ((ddr1->cs0_config >> 24) & 0xf) { + case 0: + puts("cache line"); + break; + case 1: + puts("page"); + break; + case 2: + puts("bank"); + break; + case 3: + puts("super-bank"); + break; + default: + puts("invalid"); + break; + } + } else { + puts("no"); + } + + puts(" interleaving"); +#endif + +#if (CONFIG_NUM_DDR_CONTROLLERS > 1) && defined(CONFIG_DDR_ECC) + puts(", "); +#endif + +#if defined(CONFIG_DDR_ECC) + puts("ECC enabled"); +#endif + + puts(")"); +} +#endif /* CONFIG_DDR_ECC || CONFIG_NUM_DDR_CONTROLLERS > 1 */ diff --git a/board/xes/common/fsl_85xx_pci.c b/board/xes/common/fsl_85xx_pci.c new file mode 100644 index 0000000000..9673a02b5b --- /dev/null +++ b/board/xes/common/fsl_85xx_pci.c @@ -0,0 +1,379 @@ +/* + * Copyright 2008 Extreme Engineering Solutions, Inc. + * Copyright 2007-2008 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +extern int fsl_pci_setup_inbound_windows(struct pci_region *r); +extern void fsl_pci_config_unlock(struct pci_controller *hose); +extern void fsl_pci_init(struct pci_controller *hose); + +int first_free_busno = 0; + +#ifdef CONFIG_PCI1 +static struct pci_controller pci1_hose; +#endif +#ifdef CONFIG_PCIE1 +static struct pci_controller pcie1_hose; +#endif +#ifdef CONFIG_PCIE2 +static struct pci_controller pcie2_hose; +#endif +#ifdef CONFIG_PCIE3 +static struct pci_controller pcie3_hose; +#endif + +#ifdef CONFIG_MPC8572 +/* Correlate host/agent POR bits to usable info. Table 4-14 */ +struct host_agent_cfg_t { + uchar pcie_root[3]; + uchar rio_host; +} host_agent_cfg[8] = { + {{0, 0, 0}, 0}, + {{0, 1, 1}, 1}, + {{1, 0, 1}, 0}, + {{1, 1, 0}, 1}, + {{0, 0, 1}, 0}, + {{0, 1, 0}, 1}, + {{1, 0, 0}, 0}, + {{1, 1, 1}, 1} +}; + +/* Correlate port width POR bits to usable info. Table 4-15 */ +struct io_port_cfg_t { + uchar pcie_width[3]; + uchar rio_width; +} io_port_cfg[16] = { + {{0, 0, 0}, 0}, + {{0, 0, 0}, 0}, + {{4, 0, 0}, 0}, + {{4, 4, 0}, 0}, + {{0, 0, 0}, 0}, + {{0, 0, 0}, 0}, + {{0, 0, 0}, 4}, + {{4, 2, 2}, 0}, + {{0, 0, 0}, 0}, + {{0, 0, 0}, 0}, + {{0, 0, 0}, 0}, + {{4, 0, 0}, 4}, + {{4, 0, 0}, 4}, + {{0, 0, 0}, 4}, + {{0, 0, 0}, 4}, + {{8, 0, 0}, 0}, +}; +#elif defined CONFIG_MPC8548 +/* Correlate host/agent POR bits to usable info. Table 4-12 */ +struct host_agent_cfg_t { + uchar pci_host[2]; + uchar pcie_root[1]; + uchar rio_host; +} host_agent_cfg[8] = { + {{1, 1}, {0}, 0}, + {{1, 1}, {1}, 0}, + {{1, 1}, {0}, 1}, + {{0, 0}, {0}, 0}, /* reserved */ + {{0, 1}, {1}, 0}, + {{1, 1}, {1}, 0}, + {{0, 1}, {1}, 1}, + {{1, 1}, {1}, 1} +}; + +/* Correlate port width POR bits to usable info. Table 4-13 */ +struct io_port_cfg_t { + uchar pcie_width[1]; + uchar rio_width; +} io_port_cfg[8] = { + {{0}, 0}, + {{0}, 0}, + {{0}, 0}, + {{4}, 4}, + {{4}, 4}, + {{0}, 4}, + {{0}, 4}, + {{8}, 0}, +}; +#endif + +void pci_init_board(void) +{ + struct pci_controller *hose; + volatile ccsr_fsl_pci_t *pci; + int width; + int host; + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + uint devdisr = gur->devdisr; + uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; + uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16; + struct pci_region *r; + +#ifdef CONFIG_PCI1 + uint pci_spd_norm = (gur->pordevsr & MPC85xx_PORDEVSR_PCI1_SPD); + uint pci_32 = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32; + uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; + uint pcix = gur->pordevsr & MPC85xx_PORDEVSR_PCI1; + uint freq = CONFIG_SYS_CLK_FREQ / 1000 / 1000; + + width = 0; /* Silence compiler warning... */ + io_sel &= 0xf; /* Silence compiler warning... */ + pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR; + hose = &pci1_hose; + host = host_agent_cfg[host_agent].pci_host[0]; + r = hose->regions; + + + if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { + printf("\n PCI1: %d bit %s, %s %d MHz, %s, %s\n", + pci_32 ? 32 : 64, + pcix ? "PCIX" : "PCI", + pci_spd_norm ? ">=" : "<=", + pcix ? freq * 2 : freq, + host ? "host" : "agent", + pci_arb ? "arbiter" : "external-arbiter"); + + /* inbound */ + r += fsl_pci_setup_inbound_windows(r); + + /* outbound memory */ + pci_set_region(r++, + CONFIG_SYS_PCI1_MEM_BASE, + CONFIG_SYS_PCI1_MEM_PHYS, + CONFIG_SYS_PCI1_MEM_SIZE, + PCI_REGION_MEM); + + /* outbound io */ + pci_set_region(r++, + CONFIG_SYS_PCI1_IO_BASE, + CONFIG_SYS_PCI1_IO_PHYS, + CONFIG_SYS_PCI1_IO_SIZE, + PCI_REGION_IO); + + hose->region_count = r - hose->regions; + + hose->first_busno = first_free_busno; + pci_setup_indirect(hose, (int)&pci->cfg_addr, + (int)&pci->cfg_data); + + fsl_pci_init(hose); + + /* Unlock inbound PCI configuration cycles */ + if (!host) + fsl_pci_config_unlock(hose); + + first_free_busno = hose->last_busno + 1; + printf(" PCI1 on bus %02x - %02x\n", + hose->first_busno, hose->last_busno); + } else { + printf(" PCI1: disabled\n"); + } +#elif defined CONFIG_MPC8548 + /* PCI1 not present on MPC8572 */ + gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */ +#endif +#ifdef CONFIG_PCIE1 + pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; + hose = &pcie1_hose; + host = host_agent_cfg[host_agent].pcie_root[0]; + width = io_port_cfg[io_sel].pcie_width[0]; + r = hose->regions; + + if (width && !(devdisr & MPC85xx_DEVDISR_PCIE)) { + printf("\n PCIE1 connected as %s (x%d)", + host ? "Root Complex" : "End Point", width); + if (pci->pme_msg_det) { + pci->pme_msg_det = 0xffffffff; + debug(" with errors. Clearing. Now 0x%08x", + pci->pme_msg_det); + } + printf("\n"); + + /* inbound */ + r += fsl_pci_setup_inbound_windows(r); + + /* outbound memory */ + pci_set_region(r++, + CONFIG_SYS_PCIE1_MEM_BASE, + CONFIG_SYS_PCIE1_MEM_PHYS, + CONFIG_SYS_PCIE1_MEM_SIZE, + PCI_REGION_MEM); + + /* outbound io */ + pci_set_region(r++, + CONFIG_SYS_PCIE1_IO_BASE, + CONFIG_SYS_PCIE1_IO_PHYS, + CONFIG_SYS_PCIE1_IO_SIZE, + PCI_REGION_IO); + + hose->region_count = r - hose->regions; + + hose->first_busno = first_free_busno; + pci_setup_indirect(hose, (int)&pci->cfg_addr, + (int) &pci->cfg_data); + + fsl_pci_init(hose); + + /* Unlock inbound PCI configuration cycles */ + if (!host) + fsl_pci_config_unlock(hose); + + first_free_busno = hose->last_busno + 1; + printf(" PCIE1 on bus %02x - %02x\n", + hose->first_busno, hose->last_busno); + } +#else + gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */ +#endif /* CONFIG_PCIE1 */ + +#ifdef CONFIG_PCIE2 + pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR; + hose = &pcie2_hose; + host = host_agent_cfg[host_agent].pcie_root[1]; + width = io_port_cfg[io_sel].pcie_width[1]; + r = hose->regions; + + if (width && !(devdisr & MPC85xx_DEVDISR_PCIE2)) { + printf("\n PCIE2 connected as %s (x%d)", + host ? "Root Complex" : "End Point", width); + if (pci->pme_msg_det) { + pci->pme_msg_det = 0xffffffff; + debug(" with errors. Clearing. Now 0x%08x", + pci->pme_msg_det); + } + printf("\n"); + + /* inbound */ + r += fsl_pci_setup_inbound_windows(r); + + /* outbound memory */ + pci_set_region(r++, + CONFIG_SYS_PCIE2_MEM_BASE, + CONFIG_SYS_PCIE2_MEM_PHYS, + CONFIG_SYS_PCIE2_MEM_SIZE, + PCI_REGION_MEM); + + /* outbound io */ + pci_set_region(r++, + CONFIG_SYS_PCIE2_IO_BASE, + CONFIG_SYS_PCIE2_IO_PHYS, + CONFIG_SYS_PCIE2_IO_SIZE, + PCI_REGION_IO); + + hose->region_count = r - hose->regions; + + hose->first_busno = first_free_busno; + pci_setup_indirect(hose, (int)&pci->cfg_addr, + (int)&pci->cfg_data); + + fsl_pci_init(hose); + + /* Unlock inbound PCI configuration cycles */ + if (!host) + fsl_pci_config_unlock(hose); + + first_free_busno = hose->last_busno + 1; + printf(" PCIE2 on bus %02x - %02x\n", + hose->first_busno, hose->last_busno); + } +#else + gur->devdisr |= MPC85xx_DEVDISR_PCIE2; /* disable */ +#endif /* CONFIG_PCIE2 */ + +#ifdef CONFIG_PCIE3 + pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR; + hose = &pcie3_hose; + host = host_agent_cfg[host_agent].pcie_root[2]; + width = io_port_cfg[io_sel].pcie_width[2]; + r = hose->regions; + + if (width && !(devdisr & MPC85xx_DEVDISR_PCIE3)) { + printf("\n PCIE3 connected as %s (x%d)", + host ? "Root Complex" : "End Point", width); + if (pci->pme_msg_det) { + pci->pme_msg_det = 0xffffffff; + debug(" with errors. Clearing. Now 0x%08x", + pci->pme_msg_det); + } + printf("\n"); + + /* inbound */ + r += fsl_pci_setup_inbound_windows(r); + + /* outbound memory */ + pci_set_region(r++, + CONFIG_SYS_PCIE3_MEM_BASE, + CONFIG_SYS_PCIE3_MEM_PHYS, + CONFIG_SYS_PCIE3_MEM_SIZE, + PCI_REGION_MEM); + + /* outbound io */ + pci_set_region(r++, + CONFIG_SYS_PCIE3_IO_BASE, + CONFIG_SYS_PCIE3_IO_PHYS, + CONFIG_SYS_PCIE3_IO_SIZE, + PCI_REGION_IO); + + hose->region_count = r - hose->regions; + + hose->first_busno = first_free_busno; + pci_setup_indirect(hose, (int)&pci->cfg_addr, + (int)&pci->cfg_data); + + fsl_pci_init(hose); + + /* Unlock inbound PCI configuration cycles */ + if (!host) + fsl_pci_config_unlock(hose); + + first_free_busno = hose->last_busno + 1; + printf(" PCIE3 on bus %02x - %02x\n", + hose->first_busno, hose->last_busno); + } +#else + gur->devdisr |= MPC85xx_DEVDISR_PCIE3; /* disable */ +#endif /* CONFIG_PCIE3 */ +} + +#if defined(CONFIG_OF_BOARD_SETUP) +extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, + struct pci_controller *hose); + +void ft_board_pci_setup(void *blob, bd_t *bd) +{ + /* TODO - make node name (eg pci0) dynamic */ +#ifdef CONFIG_PCI1 + ft_fsl_pci_setup(blob, "pci0", &pci1_hose); +#endif +#ifdef CONFIG_PCIE1 + ft_fsl_pci_setup(blob, "pci2", &pcie1_hose); +#endif +#ifdef CONFIG_PCIE2 + ft_fsl_pci_setup(blob, "pci1", &pcie2_hose); +#endif +#ifdef CONFIG_PCIE3 + ft_fsl_pci_setup(blob, "pci0", &pcie3_hose); +#endif +} +#endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/board/xes/xpedite5200/Makefile b/board/xes/xpedite5200/Makefile new file mode 100644 index 0000000000..02fe8fcd2d --- /dev/null +++ b/board/xes/xpedite5200/Makefile @@ -0,0 +1,55 @@ +# +# Copyright 2008 Extreme Engineering Solutions, Inc. +# Copyright 2004 Freescale Semiconductor. +# (C) Copyright 2001-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y += $(BOARD).o +COBJS-y += ddr.o +COBJS-y += law.o +COBJS-y += tlb.o + +SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS-y)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(OBJS) $(SOBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/xes/xpedite5200/config.mk b/board/xes/xpedite5200/config.mk new file mode 100644 index 0000000000..be5a5c32c0 --- /dev/null +++ b/board/xes/xpedite5200/config.mk @@ -0,0 +1,34 @@ +# +# Copyright 2008 Extreme Engineering Solutions, Inc. +# Copyright 2004, 2007 Freescale Semiconductor. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# xpedite5200 board +# +ifndef TEXT_BASE +TEXT_BASE = 0xfff80000 +endif + +PLATFORM_CPPFLAGS += -DCONFIG_E500=1 +PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1 +PLATFORM_CPPFLAGS += -DCONFIG_MPC8548=1 +PLATFORM_CPPFLAGS += -mrelocatable diff --git a/board/xes/xpedite5200/ddr.c b/board/xes/xpedite5200/ddr.c new file mode 100644 index 0000000000..c5616d546b --- /dev/null +++ b/board/xes/xpedite5200/ddr.c @@ -0,0 +1,91 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + */ + +#include +#include + +#include +#include + +static void +get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) +{ + i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); + + /* We use soldered memory, but use an SPD EEPROM to describe it. + * The SPD has an unspecified dimm type, but the DDR2 initialization + * code requires a specific type to be specified. This sets the type + * as a standard unregistered SO-DIMM. */ + if (spd->dimm_type == 0) { + spd->dimm_type = 0x4; + ((uchar *)spd)[63] += 0x4; + } +} + +unsigned int fsl_ddr_get_mem_data_rate(void) +{ + return get_ddr_freq(0); +} + +void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, + unsigned int ctrl_num) +{ + unsigned int i; + + if (ctrl_num) { + printf("%s: invalid ctrl_num = %d\n", __func__, ctrl_num); + return; + } + + for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) + get_spd(&(ctrl_dimms_spd[i]), SPD_EEPROM_ADDRESS); +} + +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) +{ + /* + * Factors to consider for clock adjust: + * - number of chips on bus + * - position of slot + * - DDR1 vs. DDR2? + * - ??? + * + * This needs to be determined on a board-by-board basis. + * 0110 3/4 cycle late + * 0111 7/8 cycle late + */ + popts->clk_adjust = 7; + + /* + * Factors to consider for CPO: + * - frequency + * - ddr1 vs. ddr2 + */ + popts->cpo_override = 9; + + /* + * Factors to consider for write data delay: + * - number of DIMMs + * + * 1 = 1/4 clock delay + * 2 = 1/2 clock delay + * 3 = 3/4 clock delay + * 4 = 1 clock delay + * 5 = 5/4 clock delay + * 6 = 3/2 clock delay + */ + popts->write_data_delay = 3; + + /* + * Factors to consider for half-strength driver enable: + * - number of DIMMs installed + */ + popts->half_strength_driver_enable = 0; +} diff --git a/board/xes/xpedite5200/law.c b/board/xes/xpedite5200/law.c new file mode 100644 index 0000000000..386f9c5873 --- /dev/null +++ b/board/xes/xpedite5200/law.c @@ -0,0 +1,51 @@ +/* + * Copyright 2008 Extreme Engineering Solutions, Inc. + * Copyright 2008 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +/* + * Notes: + * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window. + * If flash is 8M at default position (last 8M), no LAW needed. + */ + +struct law_entry law_table[] = { + /* LBC window - maps 256M 0xf0000000 -> 0xffffffff */ + SET_LAW(CONFIG_SYS_FLASH_BASE2, LAW_SIZE_256M, LAW_TRGT_IF_LBC), + SET_LAW(CONFIG_SYS_NAND_BASE, LAW_SIZE_1M, LAW_TRGT_IF_LBC), +#if CONFIG_SYS_PCI1_MEM_PHYS + SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_1G, LAW_TRGT_IF_PCI_1), + SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAWAR_SIZE_8M, LAW_TRGT_IF_PCI_1), +#endif +#if CONFIG_SYS_PCI2_MEM_PHYS + SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI_2), + SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCI_2), +#endif +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/xes/xpedite5200/tlb.c b/board/xes/xpedite5200/tlb.c new file mode 100644 index 0000000000..bd7bff820b --- /dev/null +++ b/board/xes/xpedite5200/tlb.c @@ -0,0 +1,85 @@ +/* + * Copyright 2008 Extreme Engineering Solutions, Inc. + * Copyright 2008 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* W**G* - NOR flashes */ + /* This will be changed to *I*G* after relocation to RAM. */ + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE2, CONFIG_SYS_FLASH_BASE2, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G, + 0, 0, BOOKE_PAGESZ_256M, 1), + + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 1, BOOKE_PAGESZ_1M, 1), + + /* *I*G* - NAND flash */ + SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 2, BOOKE_PAGESZ_1M, 1), + +#if CONFIG_PCI1 + /* *I*G* - PCI MEM */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_1G, 1), +#endif + +#if CONFIG_PCI2 + /* *I*G* - PCI MEM */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCI2_MEM_PHYS, CONFIG_SYS_PCI2_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 4, BOOKE_PAGESZ_256M, 1), +#endif + +#if defined(CONFIG_PCI1) || defined(CONFIG_PCI2) + /* *I*G* - PCI IO */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_IO_PHYS, CONFIG_SYS_PCI1_IO_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 5, BOOKE_PAGESZ_16M, 1), +#endif +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/xes/xpedite5200/u-boot.lds b/board/xes/xpedite5200/u-boot.lds new file mode 100644 index 0000000000..bd952d20fa --- /dev/null +++ b/board/xes/xpedite5200/u-boot.lds @@ -0,0 +1,145 @@ +/* + * Copyright 2008 Extreme Engineering Solutions, Inc. + * Copyright 2004, 2007-2008 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +PHDRS +{ + text PT_LOAD; + bss PT_LOAD; +} + +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + *(.text) + *(.got1) + } :text + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } :text + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + .bootpg ADDR(.text) + 0x7f000 : + { + cpu/mpc85xx/start.o (.bootpg) + } :text = 0xffff + + .resetvec ADDR(.text) + 0x7fffc : + { + *(.resetvec) + } :text = 0xffff + + . = ADDR(.text) + 0x80000; + + __bss_start = .; + .bss (NOLOAD) : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } :bss + + . = ALIGN(4); + _end = . ; + PROVIDE (end = .); +} diff --git a/board/xes/xpedite5200/xpedite5200.c b/board/xes/xpedite5200/xpedite5200.c new file mode 100644 index 0000000000..e266d1dd83 --- /dev/null +++ b/board/xes/xpedite5200/xpedite5200.c @@ -0,0 +1,125 @@ +/* + * Copyright 2008 Extreme Engineering Solutions, Inc. + * Copyright 2004, 2007 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +extern void ft_board_pci_setup(void *blob, bd_t *bd); + +int checkboard(void) +{ + volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); + + char *s; + + printf("Board: X-ES %s PMC\n", CONFIG_SYS_BOARD_NAME); + printf(" "); + s = getenv("board_rev"); + if (s) + printf("Rev %s, ", s); + s = getenv("serial#"); + if (s) + printf("Serial# %s, ", s); + s = getenv("board_cfg"); + if (s) + printf("Cfg %s", s); + printf("\n"); + + lbc->ltesr = 0xffffffff; /* Clear LBC error interrupts */ + lbc->lteir = 0xffffffff; /* Enable LBC error interrupts */ + ecm->eedr = 0xffffffff; /* Clear ecm errors */ + ecm->eeer = 0xffffffff; /* Enable ecm errors */ + + return 0; +} + +static void flash_cs_fixup(void) +{ + volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + int flash_sel; + + /* + * Print boot dev and swap flash flash chip selects if booted from 2nd + * flash. Swapping chip selects presents user with a common memory + * map regardless of which flash was booted from. + */ + flash_sel = !((pca953x_get_val(CONFIG_SYS_I2C_PCA953X_ADDR0) & + CONFIG_SYS_PCA953X_FLASH_PASS_CS)); + printf("FLASH: Executed from FLASH%d\n", flash_sel ? 2 : 1); + + if (flash_sel) { + lbc->br0 = CONFIG_SYS_BR1_PRELIM; + lbc->or0 = CONFIG_SYS_OR1_PRELIM; + + lbc->br1 = CONFIG_SYS_BR0_PRELIM; + lbc->or1 = CONFIG_SYS_OR0_PRELIM; + } +} + +int board_early_init_r(void) +{ + /* Initialize PCA9557 devices */ + pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR0, 0xff, 0); + pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR1, 0xff, 0); + + /* + * Remap NOR flash region to caching-inhibited + * so that flash can be erased/programmed properly. + */ + + /* Flush d-cache and invalidate i-cache of any FLASH data */ + flush_dcache(); + invalidate_icache(); + + /* Invalidate existing TLB entry for NOR flash */ + disable_tlb(0); + set_tlb(1, (CONFIG_SYS_FLASH_BASE2 & 0xf0000000), + (CONFIG_SYS_FLASH_BASE2 & 0xf0000000), + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_256M, 1); + + flash_cs_fixup(); + + return 0; +} + +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ +#ifdef CONFIG_PCI + ft_board_pci_setup(blob, bd); +#endif + ft_cpu_setup(blob, bd); +} +#endif diff --git a/board/xes/xpedite5370/Makefile b/board/xes/xpedite5370/Makefile new file mode 100644 index 0000000000..919397c40d --- /dev/null +++ b/board/xes/xpedite5370/Makefile @@ -0,0 +1,45 @@ +# +# Copyright 2008 Extreme Engineering Solutions, Inc. +# Copyright 2007 Freescale Semiconductor, Inc. +# (C) Copyright 2001-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y += $(BOARD).o +COBJS-y += ddr.o +COBJS-y += law.o +COBJS-y += tlb.o + +SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS-y)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(OBJS) $(SOBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/xes/xpedite5370/config.mk b/board/xes/xpedite5370/config.mk new file mode 100644 index 0000000000..39469b22c8 --- /dev/null +++ b/board/xes/xpedite5370/config.mk @@ -0,0 +1,35 @@ +# +# Copyright 2008 Extreme Engineering Solutions, Inc. +# Copyright 2007-2008 Freescale Semiconductor, Inc. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# xpedite5370 board +# +ifndef TEXT_BASE +TEXT_BASE = 0xfff80000 +endif + +PLATFORM_RELFLAGS += -mrelocatable + +PLATFORM_CPPFLAGS += -DCONFIG_E500=1 +PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1 +PLATFORM_CPPFLAGS += -DCONFIG_MPC8572=1 diff --git a/board/xes/xpedite5370/ddr.c b/board/xes/xpedite5370/ddr.c new file mode 100644 index 0000000000..4d3f255d70 --- /dev/null +++ b/board/xes/xpedite5370/ddr.c @@ -0,0 +1,270 @@ +/* + * Copyright 2008 Extreme Engineering Solutions, Inc. + * Copyright 2008 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#include +#include + +static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) +{ + i2c_read(i2c_address, SPD_EEPROM_OFFSET, 2, (uchar *)spd, + sizeof(ddr2_spd_eeprom_t)); +} + +unsigned int fsl_ddr_get_mem_data_rate(void) +{ + return get_ddr_freq(0); +} + +void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, + unsigned int ctrl_num) +{ + unsigned int i; + unsigned int i2c_address = 0; + + for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { + if (ctrl_num == 0) + i2c_address = SPD_EEPROM_ADDRESS1; + if (ctrl_num == 1) + i2c_address = SPD_EEPROM_ADDRESS2; + get_spd(&(ctrl_dimms_spd[i]), i2c_address); + } +} + +/* + * There are four board-specific SDRAM timing parameters which must be + * calculated based on the particular PCB artwork. These are: + * 1.) CPO (Read Capture Delay) + * - TIMING_CFG_2 register + * Source: Calculation based on board trace lengths and + * chip-specific internal delays. + * 2.) WR_DATA_DELAY (Write Command to Data Strobe Delay) + * - TIMING_CFG_2 register + * Source: Calculation based on board trace lengths. + * Unless clock and DQ lanes are very different + * lengths (>2"), this should be set to the nominal value + * of 1/2 clock delay. + * 3.) CLK_ADJUST (Clock and Addr/Cmd alignment control) + * - DDR_SDRAM_CLK_CNTL register + * Source: Signal Integrity Simulations + * 4.) 2T Timing on Addr/Ctl + * - TIMING_CFG_2 register + * Source: Signal Integrity Simulations + * Usually only needed with heavy load/very high speed (>DDR2-800) + * + * ====== XPedite5370 DDR2-600 read delay calculations ====== + * + * See Freescale's App Note AN2583 as refrence. This document also + * contains the chip-specific delays for 8548E, 8572, etc. + * + * For MPC8572E + * Minimum chip delay (Ch 0): 1.372ns + * Maximum chip delay (Ch 0): 2.914ns + * Minimum chip delay (Ch 1): 1.220ns + * Maximum chip delay (Ch 1): 2.595ns + * + * CLK adjust = 5 (from simulations) = 5/8* 3.33ns = 2080ps + * + * Minimum delay calc (Ch 0): + * clock prop - dram skew + min dqs prop delay + clk_adjust + min chip dly + * 2.3" * 180 - 400ps + 1.9" * 180 + 2080ps + 1372ps + * = 3808ps + * = 3.808ns + * + * Maximum delay calc (Ch 0): + * clock prop + dram skew + max dqs prop delay + clk_adjust + max chip dly + * 2.3" * 180 + 400ps + 2.4" * 180 + 2080ps + 2914ps + * = 6240ps + * = 6.240ns + * + * Minimum delay calc (Ch 1): + * clock prop - dram skew + min dqs prop delay + clk_adjust + min chip dly + * 1.46" * 180- 400ps + 0.7" * 180 + 2080ps + 1220ps + * = 3288ps + * = 3.288ns + * + * Maximum delay calc (Ch 1): + * clock prop + dram skew + max dqs prop delay + clk_adjust + min chip dly + * 1.46" * 180+ 400ps + 1.1" * 180 + 2080ps + 2595ps + * = 5536ps + * = 5.536ns + * + * Ch.0: 3.808ns to 6.240ns additional delay needed (pick 5ns as target) + * This is 1.5 clock cycles, pick CPO = READ_LAT + 3/2 (0x8) + * Ch.1: 3.288ns to 5.536ns additional delay needed (pick 4.4ns as target) + * This is 1.32 clock cycles, pick CPO = READ_LAT + 5/4 (0x7) + * + * + * ====== XPedite5370 DDR2-800 read delay calculations ====== + * + * See Freescale's App Note AN2583 as refrence. This document also + * contains the chip-specific delays for 8548E, 8572, etc. + * + * For MPC8572E + * Minimum chip delay (Ch 0): 1.372ns + * Maximum chip delay (Ch 0): 2.914ns + * Minimum chip delay (Ch 1): 1.220ns + * Maximum chip delay (Ch 1): 2.595ns + * + * CLK adjust = 5 (from simulations) = 5/8* 2.5ns = 1563ps + * + * Minimum delay calc (Ch 0): + * clock prop - dram skew + min dqs prop delay + clk_adjust + min chip dly + * 2.3" * 180 - 350ps + 1.9" * 180 + 1563ps + 1372ps + * = 3341ps + * = 3.341ns + * + * Maximum delay calc (Ch 0): + * clock prop + dram skew + max dqs prop delay + clk_adjust + max chip dly + * 2.3" * 180 + 350ps + 2.4" * 180 + 1563ps + 2914ps + * = 5673ps + * = 5.673ns + * + * Minimum delay calc (Ch 1): + * clock prop - dram skew + min dqs prop delay + clk_adjust + min chip dly + * 1.46" * 180- 350ps + 0.7" * 180 + 1563ps + 1220ps + * = 2822ps + * = 2.822ns + * + * Maximum delay calc (Ch 1): + * clock prop + dram skew + max dqs prop delay + clk_adjust + min chip dly + * 1.46" * 180+ 350ps + 1.1" * 180 + 1563ps + 2595ps + * = 4968ps + * = 4.968ns + * + * Ch.0: 3.341ns to 5.673ns additional delay needed (pick 4.5ns as target) + * This is 1.8 clock cycles, pick CPO = READ_LAT + 7/4 (0x9) + * Ch.1: 2.822ns to 4.968ns additional delay needed (pick 3.9ns as target) + * This is 1.56 clock cycles, pick CPO = READ_LAT + 3/2 (0x8) + * + * Write latency (WR_DATA_DELAY) is calculated by doing the following: + * + * The DDR SDRAM specification requires DQS be received no sooner than + * 75% of an SDRAM clock period—and no later than 125% of a clock + * period—from the capturing clock edge of the command/address at the + * SDRAM. + * + * Based on the above tracelengths, the following are calculated: + * Ch. 0 8572 to DRAM propagation (DQ lanes) : 1.9" * 180 = 0.342ns + * Ch. 0 8572 to DRAM propagation (CLKs) : 2.3" * 180 = 0.414ns + * Ch. 1 8572 to DRAM propagation (DQ lanes) : 0.7" * 180 = 0.126ns + * Ch. 1 8572 to DRAM propagation (CLKs ) : 1.47" * 180 = 0.264ns + * + * Difference in arrival time CLK vs. DQS: + * Ch. 0 0.072ns + * Ch. 1 0.138ns + * + * Both of these values are much less than 25% of the clock + * period at DDR2-600 or DDR2-800, so no additional delay is needed over + * the 1/2 cycle which normally aligns the first DQS transition + * exactly WL (CAS latency minus one cycle) after the CAS strobe. + * See Figure 9-53 in MPC8572E manual: "1/2 delay" in Freescale's + * terminology corresponds to exactly one clock period delay after + * the CAS strobe. (due to the fact that the "delay" is referenced + * from the *falling* edge of the CLK, just after the rising edge + * which the CAS strobe is latched on. + */ + +typedef struct board_memctl_options { + uint16_t datarate_mhz_low; + uint16_t datarate_mhz_high; + uint8_t clk_adjust; + uint8_t cpo_override; + uint8_t write_data_delay; +} board_memctl_options_t; + +static struct board_memctl_options bopts_ctrl[][2] = { + { + /* Controller 0 */ + { + /* DDR2 600/667 */ + .datarate_mhz_low = 500, + .datarate_mhz_high = 750, + .clk_adjust = 5, + .cpo_override = 8, + .write_data_delay = 2, + }, + { + /* DDR2 800 */ + .datarate_mhz_low = 750, + .datarate_mhz_high = 850, + .clk_adjust = 5, + .cpo_override = 9, + .write_data_delay = 2, + }, + }, + { + /* Controller 1 */ + { + /* DDR2 600/667 */ + .datarate_mhz_low = 500, + .datarate_mhz_high = 750, + .clk_adjust = 5, + .cpo_override = 7, + .write_data_delay = 2, + }, + { + /* DDR2 800 */ + .datarate_mhz_low = 750, + .datarate_mhz_high = 850, + .clk_adjust = 5, + .cpo_override = 8, + .write_data_delay = 2, + }, + }, +}; + +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) +{ + struct board_memctl_options *bopts = bopts_ctrl[ctrl_num]; + sys_info_t sysinfo; + int i; + unsigned int datarate; + + get_sys_info(&sysinfo); + datarate = sysinfo.freqDDRBus / 1000 / 1000; + + for (i = 0; i < ARRAY_SIZE(bopts_ctrl[ctrl_num]); i++) { + if ((bopts[i].datarate_mhz_low <= datarate) && + (bopts[i].datarate_mhz_high >= datarate)) { + debug("controller %d:\n", ctrl_num); + debug(" clk_adjust = %d\n", bopts[i].clk_adjust); + debug(" cpo = %d\n", bopts[i].cpo_override); + debug(" write_data_delay = %d\n", + bopts[i].write_data_delay); + popts->clk_adjust = bopts[i].clk_adjust; + popts->cpo_override = bopts[i].cpo_override; + popts->write_data_delay = bopts[i].write_data_delay; + } + } + + /* + * Factors to consider for half-strength driver enable: + * - number of DIMMs installed + */ + popts->half_strength_driver_enable = 0; +} diff --git a/board/xes/xpedite5370/law.c b/board/xes/xpedite5370/law.c new file mode 100644 index 0000000000..daee676c42 --- /dev/null +++ b/board/xes/xpedite5370/law.c @@ -0,0 +1,54 @@ +/* + * Copyright 2008 Extreme Engineering Solutions, Inc. + * Copyright 2008 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +/* + * Notes: + * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window. + * If flash is 8M at default position (last 8M), no LAW needed. + */ + +struct law_entry law_table[] = { + SET_LAW(CONFIG_SYS_FLASH_BASE2, LAW_SIZE_256M, LAW_TRGT_IF_LBC), + SET_LAW(CONFIG_SYS_NAND_BASE, LAW_SIZE_1M, LAW_TRGT_IF_LBC), +#ifdef CONFIG_SYS_PCIE1_MEM_PHYS + SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_1G, LAW_TRGT_IF_PCIE_1), + SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1), +#endif +#ifdef CONFIG_SYS_PCIE2_MEM_PHYS + SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_2), + SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_2), +#endif +#ifdef CONFIG_SYS_PCIE3_MEM_PHYS + SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_3), + SET_LAW(CONFIG_SYS_PCIE3_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_3), +#endif +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/xes/xpedite5370/tlb.c b/board/xes/xpedite5370/tlb.c new file mode 100644 index 0000000000..caafa3011b --- /dev/null +++ b/board/xes/xpedite5370/tlb.c @@ -0,0 +1,94 @@ +/* + * Copyright 2008 Extreme Engineering Solutions, Inc. + * Copyright 2008 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* W**G* - NOR flashes */ + /* This will be changed to *I*G* after relocation to RAM. */ + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE2, CONFIG_SYS_FLASH_BASE2, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G, + 0, 0, BOOKE_PAGESZ_256M, 1), + + /* *I*G* - CCSRBAR */ + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 1, BOOKE_PAGESZ_1M, 1), + + /* *I*G* - NAND flash */ + SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 2, BOOKE_PAGESZ_1M, 1), + +#ifdef CONFIG_PCIE1 + /* *I*G* - PCIe */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_PHYS, CONFIG_SYS_PCIE1_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_1G, 1), +#endif + +#ifdef CONFIG_PCIE2 + /* *I*G* - PCIe */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE2_MEM_PHYS, CONFIG_SYS_PCIE2_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 4, BOOKE_PAGESZ_256M, 1), +#endif + +#ifdef CONFIG_PCIE3 + /* *I*G* - PCIe */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_PHYS, CONFIG_SYS_PCIE3_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 5, BOOKE_PAGESZ_256M, 1), +#endif + +#if defined(CONFIG_PCIE1) || defined(CONFIG_PCIE2) || defined(CONFIG_PCIE3) + /* *I*G* - PCIe */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_PHYS, CONFIG_SYS_PCIE1_IO_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 6, BOOKE_PAGESZ_64M, 1), +#endif + +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/xes/xpedite5370/u-boot.lds b/board/xes/xpedite5370/u-boot.lds new file mode 100644 index 0000000000..cb399120d4 --- /dev/null +++ b/board/xes/xpedite5370/u-boot.lds @@ -0,0 +1,145 @@ +/* + * Copyright 2008 Extreme Engineering Solutions, Inc. + * Copyright 2007-2008 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +PHDRS +{ + text PT_LOAD; + bss PT_LOAD; +} + +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + *(.text) + *(.got1) + } :text + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } :text + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + .bootpg ADDR(.text) + 0x7f000 : + { + cpu/mpc85xx/start.o (.bootpg) + } :text = 0xffff + + .resetvec ADDR(.text) + 0x7fffc : + { + *(.resetvec) + } :text = 0xffff + + . = ADDR(.text) + 0x80000; + + __bss_start = .; + .bss (NOLOAD) : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } :bss + + . = ALIGN(4); + _end = . ; + PROVIDE (end = .); +} diff --git a/board/xes/xpedite5370/xpedite5370.c b/board/xes/xpedite5370/xpedite5370.c new file mode 100644 index 0000000000..487509527f --- /dev/null +++ b/board/xes/xpedite5370/xpedite5370.c @@ -0,0 +1,128 @@ +/* + * Copyright 2008 Extreme Engineering Solutions, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +extern void ft_board_pci_setup(void *blob, bd_t *bd); + +int checkboard(void) +{ + char *s; + + printf("Board: X-ES %s 3U VPX SBC\n", CONFIG_SYS_BOARD_NAME); + printf(" "); + s = getenv("board_rev"); + if (s) + printf("Rev %s, ", s); + s = getenv("serial#"); + if (s) + printf("Serial# %s, ", s); + s = getenv("board_cfg"); + if (s) + printf("Cfg %s", s); + printf("\n"); + + return 0; +} + +static void flash_cs_fixup(void) +{ + volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + int flash_sel; + + /* + * Print boot dev and swap flash flash chip selects if booted from 2nd + * flash. Swapping chip selects presents user with a common memory + * map regardless of which flash was booted from. + */ + flash_sel = !((pca953x_get_val(CONFIG_SYS_I2C_PCA953X_ADDR0) & + CONFIG_SYS_PCA953X_C0_FLASH_PASS_CS)); + printf("FLASH: Executed from FLASH%d\n", flash_sel ? 2 : 1); + + if (flash_sel) { + lbc->br0 = CONFIG_SYS_BR1_PRELIM; + lbc->or0 = CONFIG_SYS_OR1_PRELIM; + + lbc->br1 = CONFIG_SYS_BR0_PRELIM; + lbc->or1 = CONFIG_SYS_OR0_PRELIM; + } +} + +int board_early_init_r(void) +{ + /* Initialize PCA9557 devices */ + pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR0, 0xff, 0); + pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR1, 0xff, 0); + pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR0, 0xff, 0); + pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR0, 0xff, 0); + + /* + * Remap NOR flash region to caching-inhibited + * so that flash can be erased/programmed properly. + */ + + /* Flush d-cache and invalidate i-cache of any FLASH data */ + flush_dcache(); + invalidate_icache(); + + /* Invalidate existing TLB entry for NOR flash */ + disable_tlb(0); + set_tlb(1, (CONFIG_SYS_FLASH_BASE2 & 0xf0000000), + (CONFIG_SYS_FLASH_BASE2 & 0xf0000000), + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_256M, 1); + + flash_cs_fixup(); + + return 0; +} + +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ +#ifdef CONFIG_PCI + ft_board_pci_setup(blob, bd); +#endif + ft_cpu_setup(blob, bd); +} +#endif + +#ifdef CONFIG_MP +extern void cpu_mp_lmb_reserve(struct lmb *lmb); + +void board_lmb_reserve(struct lmb *lmb) +{ + cpu_mp_lmb_reserve(lmb); +} +#endif diff --git a/common/fdt_support.c b/common/fdt_support.c index 5a83bca481..a79bc085b2 100644 --- a/common/fdt_support.c +++ b/common/fdt_support.c @@ -610,7 +610,7 @@ int fdt_resize(void *blob) fdt_size_dt_strings(blob) + sizeof(struct fdt_reserve_entry); /* Make it so the fdt ends on a page boundary */ - actualsize = ALIGN(actualsize, 0x1000); + actualsize = ALIGN(actualsize + ((uint)blob & 0xfff), 0x1000); actualsize = actualsize - ((uint)blob & 0xfff); /* Change the fdt header to reflect the correct size */ diff --git a/common/usb_kbd.c b/common/usb_kbd.c index cf14560955..89e6ee7e5d 100644 --- a/common/usb_kbd.c +++ b/common/usb_kbd.c @@ -211,7 +211,11 @@ int drv_usb_kbd_init(void) /* deregistering the keyboard */ int usb_kbd_deregister(void) { +#ifdef CONFIG_SYS_DEVICE_DEREGISTER return device_deregister(DEVNAME); +#else + return 1; +#endif } /************************************************************************** diff --git a/config.mk b/config.mk index d770f09f93..b1254e9042 100644 --- a/config.mk +++ b/config.mk @@ -46,7 +46,7 @@ PLATFORM_LDFLAGS = ######################################################################### -ifeq ($(HOSTOS)-$(HOSTARCH),darwin-ppc) +ifeq ($(HOSTOS),darwin) HOSTCC = cc else HOSTCC = gcc @@ -181,7 +181,7 @@ endif # # So far, this is used only by tools/gdb/Makefile. -ifeq ($(HOSTOS)-$(HOSTARCH),darwin-ppc) +ifeq ($(HOSTOS),darwin) BFD_ROOT_DIR = /usr/local/tools else ifeq ($(HOSTARCH),$(ARCH)) diff --git a/cpu/arm920t/at91rm9200/lowlevel_init.S b/cpu/arm920t/at91rm9200/lowlevel_init.S index 66b07da08b..0913284e79 100644 --- a/cpu/arm920t/at91rm9200/lowlevel_init.S +++ b/cpu/arm920t/at91rm9200/lowlevel_init.S @@ -38,33 +38,7 @@ * turn is based on the boot.bin code from ATMEL * */ - -/* flash */ -#define MC_PUIA 0xFFFFFF10 -#define MC_PUP 0xFFFFFF50 -#define MC_PUER 0xFFFFFF54 -#define MC_ASR 0xFFFFFF04 -#define MC_AASR 0xFFFFFF08 -#define EBI_CFGR 0xFFFFFF64 -#define SMC_CSR0 0xFFFFFF70 - -/* clocks */ -#define PLLAR 0xFFFFFC28 -#define PLLBR 0xFFFFFC2C -#define MCKR 0xFFFFFC30 - -#define AT91C_BASE_CKGR 0xFFFFFC20 -#define CKGR_MOR 0 - -/* sdram */ -#define PIOC_ASR 0xFFFFF870 -#define PIOC_BSR 0xFFFFF874 -#define PIOC_PDR 0xFFFFF804 -#define EBI_CSA 0xFFFFFF60 -#define SDRC_CR 0xFFFFFF98 -#define SDRC_MR 0xFFFFFF90 -#define SDRC_TR 0xFFFFFF94 - +#include _MTEXT_BASE: #undef START_FROM_MEM @@ -84,7 +58,7 @@ lowlevel_init: #else ldr r0, =0x0000FF00 /* Disable main oscillator, OSCOUNT = 0xFF */ #endif - str r0, [r1, #CKGR_MOR] + str r0, [r1, #AT91C_CKGR_MOR] /* Add loop to compensate Main Oscillator startup time */ ldr r0, =0x00000010 LoopOsc: @@ -134,72 +108,72 @@ LoopOsc: .ltorg SMRDATA: - .word MC_PUIA - .word MC_PUIA_VAL - .word MC_PUP - .word MC_PUP_VAL - .word MC_PUER - .word MC_PUER_VAL - .word MC_ASR - .word MC_ASR_VAL - .word MC_AASR - .word MC_AASR_VAL - .word EBI_CFGR - .word EBI_CFGR_VAL - .word SMC_CSR0 - .word SMC_CSR0_VAL - .word PLLAR - .word PLLAR_VAL - .word PLLBR - .word PLLBR_VAL - .word MCKR - .word MCKR_VAL + .word AT91C_MC_PUIA + .word CONFIG_SYS_MC_PUIA_VAL + .word AT91C_MC_PUP + .word CONFIG_SYS_MC_PUP_VAL + .word AT91C_MC_PUER + .word CONFIG_SYS_MC_PUER_VAL + .word AT91C_MC_ASR + .word CONFIG_SYS_MC_ASR_VAL + .word AT91C_MC_AASR + .word CONFIG_SYS_MC_AASR_VAL + .word AT91C_EBI_CFGR + .word CONFIG_SYS_EBI_CFGR_VAL + .word AT91C_SMC_CSR0 + .word CONFIG_SYS_SMC_CSR0_VAL + .word AT91C_PLLAR + .word CONFIG_SYS_PLLAR_VAL + .word AT91C_PLLBR + .word CONFIG_SYS_PLLBR_VAL + .word AT91C_MCKR + .word CONFIG_SYS_MCKR_VAL /* SMRDATA is 80 bytes long */ /* here there's a delay of 100 */ SMRDATA1: - .word PIOC_ASR - .word PIOC_ASR_VAL - .word PIOC_BSR - .word PIOC_BSR_VAL - .word PIOC_PDR - .word PIOC_PDR_VAL - .word EBI_CSA - .word EBI_CSA_VAL - .word SDRC_CR - .word SDRC_CR_VAL - .word SDRC_MR - .word SDRC_MR_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRC_MR - .word SDRC_MR_VAL1 - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRC_MR - .word SDRC_MR_VAL2 - .word SDRAM1 - .word SDRAM_VAL - .word SDRC_TR - .word SDRC_TR_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRC_MR - .word SDRC_MR_VAL3 - .word SDRAM - .word SDRAM_VAL + .word AT91C_PIOC_ASR + .word CONFIG_SYS_PIOC_ASR_VAL + .word AT91C_PIOC_BSR + .word CONFIG_SYS_PIOC_BSR_VAL + .word AT91C_PIOC_PDR + .word CONFIG_SYS_PIOC_PDR_VAL + .word AT91C_EBI_CSA + .word CONFIG_SYS_EBI_CSA_VAL + .word AT91C_SDRC_CR + .word CONFIG_SYS_SDRC_CR_VAL + .word AT91C_SDRC_MR + .word CONFIG_SYS_SDRC_MR_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word AT91C_SDRC_MR + .word CONFIG_SYS_SDRC_MR_VAL1 + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word AT91C_SDRC_MR + .word CONFIG_SYS_SDRC_MR_VAL2 + .word CONFIG_SYS_SDRAM1 + .word CONFIG_SYS_SDRAM_VAL + .word AT91C_SDRC_TR + .word CONFIG_SYS_SDRC_TR_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word AT91C_SDRC_MR + .word CONFIG_SYS_SDRC_MR_VAL3 + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL /* SMRDATA1 is 176 bytes long */ #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ diff --git a/cpu/mpc824x/Makefile b/cpu/mpc824x/Makefile index f249dd7c3b..a57ad12c41 100644 --- a/cpu/mpc824x/Makefile +++ b/cpu/mpc824x/Makefile @@ -44,7 +44,7 @@ $(LIB): $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) $(obj)bedbug_603e.c: - ln -s $(src)../mpc8260/bedbug_603e.c $(obj)bedbug_603e.c + ln -sf $(src)../mpc8260/bedbug_603e.c $(obj)bedbug_603e.c ######################################################################### diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c index 943602f923..15ba7f1c5e 100644 --- a/cpu/mpc85xx/cpu.c +++ b/cpu/mpc85xx/cpu.c @@ -77,8 +77,6 @@ struct cpu_type *identify_cpu(u32 ver) int checkcpu (void) { sys_info_t sysinfo; - uint lcrr; /* local bus clock ratio register */ - uint clkdiv; /* clock divider portion of lcrr */ uint pvr, svr; uint fam; uint ver; @@ -165,30 +163,11 @@ int checkcpu (void) break; } -#if defined(CONFIG_SYS_LBC_LCRR) - lcrr = CONFIG_SYS_LBC_LCRR; -#else - { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); - - lcrr = lbc->lcrr; - } -#endif - clkdiv = lcrr & 0x0f; - if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) { -#if defined(CONFIG_MPC8548) || defined(CONFIG_MPC8544) || \ - defined(CONFIG_MPC8572) || defined(CONFIG_MPC8536) - /* - * Yes, the entire PQ38 family use the same - * bit-representation for twice the clock divider values. - */ - clkdiv *= 2; -#endif - printf("LBC:%-4s MHz\n", - strmhz(buf1, sysinfo.freqSystemBus / clkdiv)); - } else { - printf("LBC: unknown (lcrr: 0x%08x)\n", lcrr); - } + if (sysinfo.freqLocalBus > LCRR_CLKDIV) + printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus)); + else + printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n", + sysinfo.freqLocalBus); #ifdef CONFIG_CPM2 printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freqSystemBus)); diff --git a/cpu/mpc85xx/fdt.c b/cpu/mpc85xx/fdt.c index 59aafb1be9..69fab99527 100644 --- a/cpu/mpc85xx/fdt.c +++ b/cpu/mpc85xx/fdt.c @@ -28,11 +28,12 @@ #include #include +DECLARE_GLOBAL_DATA_PTR; + extern void ft_qe_setup(void *blob); #ifdef CONFIG_MP #include "mp.h" -DECLARE_GLOBAL_DATA_PTR; void ft_fixup_cpu(void *blob, u64 memory_limit) { @@ -231,6 +232,11 @@ void ft_cpu_setup(void *blob, bd_t *bd) "clock-frequency", bd->bi_intfreq, 1); do_fixup_by_prop_u32(blob, "device_type", "soc", 4, "bus-frequency", bd->bi_busfreq, 1); + + do_fixup_by_compat_u32(blob, "fsl,pq3-localbus", + "bus-frequency", gd->lbc_clk, 1); + do_fixup_by_compat_u32(blob, "fsl,elbc", + "bus-frequency", gd->lbc_clk, 1); #ifdef CONFIG_QE ft_qe_setup(blob); #endif diff --git a/cpu/mpc85xx/release.S b/cpu/mpc85xx/release.S index 7c3e8a1725..54c936c3ed 100644 --- a/cpu/mpc85xx/release.S +++ b/cpu/mpc85xx/release.S @@ -157,6 +157,7 @@ __secondary_start_page: mfspr r0,SPRN_PIR stw r0,ENTRY_PIR(r10) + mtspr IVPR,r12 /* * Coming here, we know the cpu has one TLB mapping in TLB1[0] * which maps 0xfffff000-0xffffffff one-to-one. We set up a diff --git a/cpu/mpc85xx/speed.c b/cpu/mpc85xx/speed.c index 1e0f4838bf..0d55228b64 100644 --- a/cpu/mpc85xx/speed.c +++ b/cpu/mpc85xx/speed.c @@ -28,6 +28,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -37,6 +38,7 @@ void get_sys_info (sys_info_t * sysInfo) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); uint plat_ratio,e500_ratio,half_freqSystemBus; + uint lcrr_div; plat_ratio = (gur->porpllsr) & 0x0000003e; plat_ratio >>= 1; @@ -60,6 +62,30 @@ void get_sys_info (sys_info_t * sysInfo) sysInfo->freqDDRBus = ddr_ratio * CONFIG_DDR_CLK_FREQ; } #endif + +#if defined(CONFIG_SYS_LBC_LCRR) + /* We will program LCRR to this value later */ + lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV; +#else + { + volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + lcrr_div = in_be32(&lbc->lcrr) & LCRR_CLKDIV; + } +#endif + if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) { +#if !defined(CONFIG_MPC8540) && !defined(CONFIG_MPC8541) && \ + !defined(CONFIG_MPC8555) && !defined(CONFIG_MPC8560) + /* + * Yes, the entire PQ38 family use the same + * bit-representation for twice the clock divider values. + */ + lcrr_div *= 2; +#endif + sysInfo->freqLocalBus = sysInfo->freqSystemBus / lcrr_div; + } else { + /* In case anyone cares what the unknown value is */ + sysInfo->freqLocalBus = lcrr_div; + } } @@ -82,6 +108,7 @@ int get_clocks (void) gd->cpu_clk = sys_info.freqProcessor; gd->bus_clk = sys_info.freqSystemBus; gd->mem_clk = sys_info.freqDDRBus; + gd->lbc_clk = sys_info.freqLocalBus; /* * The base clock for I2C depends on the actual SOC. Unfortunately, diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S index 8fa0ff7a8a..80f96773e9 100644 --- a/cpu/mpc85xx/start.S +++ b/cpu/mpc85xx/start.S @@ -184,19 +184,19 @@ _start_e500: mtspr DBCR0,r0 #endif - /* create a temp mapping in AS=1 to the boot window */ + /* create a temp mapping in AS=1 to the 4M boot window */ lis r6,FSL_BOOKE_MAS0(1, 15, 0)@h ori r6,r6,FSL_BOOKE_MAS0(1, 15, 0)@l - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16M)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16M)@l + lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@h + ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@l - /* Align the mapping to 16MB */ - lis r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xff000000, (MAS2_I|MAS2_G))@h - ori r8,r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xff000000, (MAS2_I|MAS2_G))@l + lis r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xffc00000, (MAS2_I|MAS2_G))@h + ori r8,r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xffc00000, (MAS2_I|MAS2_G))@l - lis r9,FSL_BOOKE_MAS3(0xff000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(0xff000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l + /* The 85xx has the default boot window 0xff800000 - 0xffffffff */ + lis r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h + ori r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l mtspr MAS0,r6 mtspr MAS1,r7 diff --git a/cpu/mpc85xx/tlb.c b/cpu/mpc85xx/tlb.c index a2d16ae2fa..25fa9ee8f8 100644 --- a/cpu/mpc85xx/tlb.c +++ b/cpu/mpc85xx/tlb.c @@ -26,6 +26,11 @@ #include #include #include +#ifdef CONFIG_ADDR_MAP +#include +#endif + +DECLARE_GLOBAL_DATA_PTR; void set_tlb(u8 tlb, u32 epn, u64 rpn, u8 perms, u8 wimge, @@ -47,6 +52,11 @@ void set_tlb(u8 tlb, u32 epn, u64 rpn, mtspr(MAS7, _mas7); #endif asm volatile("isync;msync;tlbwe;isync"); + +#ifdef CONFIG_ADDR_MAP + if ((tlb == 1) && (gd->flags & GD_FLG_RELOC)) + addrmap_set_entry(epn, rpn, (1UL << ((tsize * 2) + 10)), esel); +#endif } void disable_tlb(u8 esel) @@ -67,6 +77,11 @@ void disable_tlb(u8 esel) mtspr(MAS7, _mas7); #endif asm volatile("isync;msync;tlbwe;isync"); + +#ifdef CONFIG_ADDR_MAP + if (gd->flags & GD_FLG_RELOC) + addrmap_set_entry(0, 0, 0, esel); +#endif } void invalidate_tlb(u8 tlb) @@ -91,6 +106,29 @@ void init_tlbs(void) return ; } +#ifdef CONFIG_ADDR_MAP +void init_addr_map(void) +{ + int i; + + for (i = 0; i < num_tlb_entries; i++) { + if (tlb_table[i].tlb == 0) + continue; + + addrmap_set_entry(tlb_table[i].epn, + tlb_table[i].rpn, + (1UL << ((tlb_table[i].tsize * 2) + 10)), + tlb_table[i].esel); + } + + return ; +} +#endif + +#ifndef CONFIG_SYS_DDR_TLB_START +#define CONFIG_SYS_DDR_TLB_START 8 +#endif + unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg) { unsigned int tlb_size; @@ -137,7 +175,7 @@ unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg) * Configure DDR TLB1 entries. * Starting at TLB1 8, use no more than 8 TLB1 entries. */ - ram_tlb_index = 8; + ram_tlb_index = CONFIG_SYS_DDR_TLB_START; ram_tlb_address = (unsigned int)CONFIG_SYS_DDR_SDRAM_BASE; while (ram_tlb_address < (memsize_in_meg * 1024 * 1024) && ram_tlb_index < 16) { diff --git a/cpu/mpc86xx/cpu.c b/cpu/mpc86xx/cpu.c index 4cace984d9..dc53bee588 100644 --- a/cpu/mpc86xx/cpu.c +++ b/cpu/mpc86xx/cpu.c @@ -39,8 +39,6 @@ checkcpu(void) uint pvr, svr; uint ver; uint major, minor; - uint lcrr; /* local bus clock ratio register */ - uint clkdiv; /* clock divider portion of lcrr */ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile ccsr_gur_t *gur = &immap->im_gur; @@ -100,22 +98,11 @@ checkcpu(void) printf("MPX:%4lu MHz, ", sysinfo.freqSystemBus / 1000000); printf("DDR:%4lu MHz, ", sysinfo.freqSystemBus / 2000000); -#if defined(CONFIG_SYS_LBC_LCRR) - lcrr = CONFIG_SYS_LBC_LCRR; -#else - { - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile ccsr_lbc_t *lbc = &immap->im_lbc; - - lcrr = lbc->lcrr; - } -#endif - clkdiv = lcrr & 0x0f; - if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) { - printf("LBC:%4lu MHz\n", - sysinfo.freqSystemBus / 1000000 / clkdiv); + if (sysinfo.freqLocalBus > LCRR_CLKDIV) { + printf("LBC:%4lu MHz\n", sysinfo.freqLocalBus / 1000000); } else { - printf(" LBC: unknown (lcrr: 0x%08x)\n", lcrr); + printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n", + sysinfo.freqLocalBus); } puts(" L2: "); diff --git a/cpu/mpc86xx/fdt.c b/cpu/mpc86xx/fdt.c index 3adfad98c6..383b06b5ae 100644 --- a/cpu/mpc86xx/fdt.c +++ b/cpu/mpc86xx/fdt.c @@ -29,6 +29,13 @@ void ft_cpu_setup(void *blob, bd_t *bd) do_fixup_by_prop_u32(blob, "device_type", "soc", 4, "bus-frequency", bd->bi_busfreq, 1); +#if defined(CONFIG_MPC8641) + do_fixup_by_compat_u32(blob, "fsl,mpc8641-localbus", + "bus-frequency", gd->lbc_clk, 1); +#endif + do_fixup_by_compat_u32(blob, "fsl,elbc", + "bus-frequency", gd->lbc_clk, 1); + fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); #if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) \ diff --git a/cpu/mpc86xx/speed.c b/cpu/mpc86xx/speed.c index 415ac9db89..64a3479d7e 100644 --- a/cpu/mpc86xx/speed.c +++ b/cpu/mpc86xx/speed.c @@ -28,6 +28,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -39,6 +40,7 @@ void get_sys_info(sys_info_t *sysInfo) volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile ccsr_gur_t *gur = &immap->im_gur; uint plat_ratio, e600_ratio; + uint lcrr_div; plat_ratio = (gur->porpllsr) & 0x0000003e; plat_ratio >>= 1; @@ -90,6 +92,22 @@ void get_sys_info(sys_info_t *sysInfo) sysInfo->freqProcessor = e600_ratio + sysInfo->freqSystemBus; break; } + +#if defined(CONFIG_SYS_LBC_LCRR) + /* We will program LCRR to this value later */ + lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV; +#else + { + volatile ccsr_lbc_t *lbc = &immap->im_lbc; + lcrr_div = in_be32(&lbc->lcrr) & LCRR_CLKDIV; + } +#endif + if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) { + sysInfo->freqLocalBus = sysInfo->freqSystemBus / (lcrr_div * 2); + } else { + /* In case anyone cares what the unknown value is */ + sysInfo->freqLocalBus = lcrr_div; + } } @@ -105,6 +123,7 @@ int get_clocks(void) get_sys_info(&sys_info); gd->cpu_clk = sys_info.freqProcessor; gd->bus_clk = sys_info.freqSystemBus; + gd->lbc_clk = sys_info.freqLocalBus; /* * The base clock for I2C depends on the actual SOC. Unfortunately, diff --git a/cpu/sh2/Makefile b/cpu/sh2/Makefile index e33ba0f2a9..346d3285db 100644 --- a/cpu/sh2/Makefile +++ b/cpu/sh2/Makefile @@ -28,18 +28,23 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(CPU).a -START = start.o -OBJS = cpu.o interrupts.o watchdog.o +SOBJS = start.o +COBJS = cpu.o interrupts.o watchdog.o -all: .depend $(START) $(LIB) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(OBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) +$(LIB): $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) -######################################################################### +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend -.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@ +######################################################################### # defines $(obj).depend target include $(SRCTREE)/rules.mk diff --git a/doc/README.at91 b/doc/README.at91 index 838769a908..4e3928a475 100644 --- a/doc/README.at91 +++ b/doc/README.at91 @@ -3,7 +3,7 @@ Atmel AT91 Evaluation kits http://atmel.com/dyn/products/tools.asp?family_id=605#1443 ------------------------------------------------------------------------------ -AT91SAM9260EK +AT91SAM9260EK & AT91SAM9XEEK ------------------------------------------------------------------------------ Memory map diff --git a/doc/README.qemu_mips b/doc/README.qemu_mips index 2fdd2b03ad..3985264245 100644 --- a/doc/README.qemu_mips +++ b/doc/README.qemu_mips @@ -17,19 +17,103 @@ create image: start it: # qemu-system-mips -M mips -pflash flash -monitor null -nographic +2) Download kernel + initrd + +On ftp://ftp.denx.de/pub/contrib/Jean-Christophe_Plagniol-Villard/qemu_mips/ +you can downland + +#config to build the kernel +qemu_mips_defconfig +#patch to fix mips interupt init on 2.6.24.y kernel +qemu_mips_kernel.patch +initrd.gz +vmlinux +vmlinux.bin +System.map + +4) Generate uImage + +# tools/mkimage -A mips -O linux -T kernel -C gzip -a 0x80010000 -e 0x80245650 -n "Linux 2.6.24.y" -d vmlinux.bin.gz uImage + +5) Copy uImage to Flash +# dd if=uImage bs=1k conv=notrunc seek=224 of=flash + +6) Generate Ide Disk + +# dd of=ide bs=1k cout=100k if=/dev/zero + +# sfdisk -C 261 -d ide +# partition table of ide +unit: sectors + + ide1 : start= 63, size= 32067, Id=83 + ide2 : start= 32130, size= 32130, Id=83 + ide3 : start= 64260, size= 4128705, Id=83 + ide4 : start= 0, size= 0, Id= 0 + +7) Copy to ide + +# dd if=uImage bs=512 conv=notrunc seek=63 of=ide + +8) Generate ext2 on part 2 on Copy uImage and initrd.gz + +# Attached as loop device ide offset = 32130 * 512 +# losetup -o 16450560 -f ide +# Format as ext2 ( arg2 : nb blocks) +# mke2fs /dev/loop0 16065 +# losetup -d /dev/loop0 +# Mount and copy uImage and initrd.gz to it +# mount -o loop,offset=16450560 -t ext2 ide /mnt +# mkdir /mnt/boot +# cp {initrd.gz,uImage} /mnt/boot/ +# Umount it +# umount /mnt + +9) Set Environment + +setenv rd_start 0x80800000 +setenv rd_size 2663940 +setenv kernel BFC38000 +setenv oad_addr 80500000 +setenv load_addr2 80F00000 +setenv kernel_flash BFC38000 +setenv load_addr_hello 80200000 +setenv bootargs 'root=/dev/ram0 init=/bin/sh' +setenv load_rd_ext2 'ide res; ext2load ide 0:2 ${rd_start} /boot/initrd.gz' +setenv load_rd_tftp 'tftp ${rd_start} /initrd.gz' +setenv load_kernel_hda 'ide res; diskboot ${load_addr} 0:2' +setenv load_kernel_ext2 'ide res; ext2load ide 0:2 ${load_addr} /boot/uImage' +setenv load_kernel_tftp 'tftp ${load_addr} /qemu_mips/uImage' +setenv boot_ext2_ext2 'run load_rd_ext2; run load_kernel_ext2; run addmisc; bootm ${load_addr}' +setenv boot_ext2_flash 'run load_rd_ext2; run addmisc; bootm ${kernel_flash}' +setenv boot_ext2_hda 'run load_rd_ext2; run load_kernel_hda; run addmisc; bootm ${load_addr}' +setenv boot_ext2_tftp 'run load_rd_ext2; run load_kernel_tftp; run addmisc; bootm ${load_addr}' +setenv boot_tftp_hda 'run load_rd_tftp; run load_kernel_hda; run addmisc; bootm ${load_addr}' +setenv boot_tftp_ext2 'run load_rd_tftp; run load_kernel_ext2; run addmisc; bootm ${load_addr}' +setenv boot_tftp_flash 'run load_rd_tftp; run addmisc; bootm ${kernel_flash}' +setenv boot_tftp_tftp 'run load_rd_tftp; run load_kernel_tftp; run addmisc; bootm ${load_addr}' +setenv load_hello_tftp 'tftp ${load_addr_hello} /examples/hello_world.bin' +setenv go_tftp 'run load_hello_tftp; go ${load_addr_hello}' +setenv addmisc 'setenv bootargs ${bootargs} console=ttyS0,${baudrate} rd_start=${rd_start} rd_size=${rd_size} ethaddr=${ethaddr}' +setenv bootcmd 'run boot_tftp_flash' + +10) Now you can boot from flash, ide, ide+ext2 and tfp + +# qemu-system-mips -M mips -pflash flash -monitor null -nographic -net nic -net user -tftp `pwd` -hda ide + II) How to debug U-Boot In order to debug U-Boot you need to start qemu with gdb server support (-s) and waiting the connection to start the CPU (-S) -# qemu-system-mips -S -s -M mips -pflash flash -monitor null -nographic +# qemu-system-mips -S -s -M mips -pflash flash -monitor null -nographic -net nic -net user -tftp `pwd` -hda ide in an other console you start gdb 1) Debugging of U-Boot Before Relocation Before relocation, the addresses in the ELF file can be used without any problems -buy connecting to the gdb server localhost:1234 +by connecting to the gdb server localhost:1234 # mipsel-unknown-linux-gnu-gdb u-boot GNU gdb 6.6 diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile new file mode 100644 index 0000000000..dd618ed71c --- /dev/null +++ b/drivers/gpio/Makefile @@ -0,0 +1,47 @@ +# +# Copyright 2000-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB := $(obj)libgpio.a + +COBJS-$(CONFIG_PCA953X) += pca953x.o + +COBJS := $(COBJS-y) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(LIB) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################## diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c new file mode 100644 index 0000000000..390d99ad3d --- /dev/null +++ b/drivers/gpio/pca953x.c @@ -0,0 +1,227 @@ +/* + * Copyright 2008 Extreme Engineering Solutions, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Driver for NXP's 4 and 8 bit I2C gpio expanders (eg pca9537, pca9557, etc) + * TODO: support additional devices with more than 8-bits GPIO + */ + +#include +#include +#include + +/* Default to an address that hopefully won't corrupt other i2c devices */ +#ifndef CONFIG_SYS_I2C_PCA953X_ADDR +#define CONFIG_SYS_I2C_PCA953X_ADDR (~0) +#endif + +enum { + PCA953X_CMD_INFO, + PCA953X_CMD_DEVICE, + PCA953X_CMD_OUTPUT, + PCA953X_CMD_INPUT, + PCA953X_CMD_INVERT, +}; + +/* + * Modify masked bits in register + */ +static int pca953x_reg_write(uint8_t chip, uint addr, uint mask, uint data) +{ + uint8_t val; + + if (i2c_read(chip, addr, 1, &val, 1)) + return -1; + + val &= ~mask; + val |= data; + + return i2c_write(chip, addr, 1, &val, 1); +} + +/* + * Set output value of IO pins in 'mask' to corresponding value in 'data' + * 0 = low, 1 = high + */ +int pca953x_set_val(uint8_t chip, uint mask, uint data) +{ + return pca953x_reg_write(chip, PCA953X_OUT, mask, data); +} + +/* + * Set read polarity of IO pins in 'mask' to corresponding value in 'data' + * 0 = read pin value, 1 = read inverted pin value + */ +int pca953x_set_pol(uint8_t chip, uint mask, uint data) +{ + return pca953x_reg_write(chip, PCA953X_POL, mask, data); +} + +/* + * Set direction of IO pins in 'mask' to corresponding value in 'data' + * 0 = output, 1 = input + */ +int pca953x_set_dir(uint8_t chip, uint mask, uint data) +{ + return pca953x_reg_write(chip, PCA953X_CONF, mask, data); +} + +/* + * Read current logic level of all IO pins + */ +int pca953x_get_val(uint8_t chip) +{ + uint8_t val; + + if (i2c_read(chip, 0, 1, &val, 1)) + return -1; + + return (int)val; +} + +#ifdef CONFIG_CMD_PCA953X +#ifdef CONFIG_CMD_PCA953X_INFO +/* + * Display pca953x information + */ +static int pca953x_info(uint8_t chip) +{ + int i; + uint8_t data; + + printf("pca953x@ 0x%x:\n\n", chip); + printf("gpio pins: 76543210\n"); + printf("-------------------\n"); + + if (i2c_read(chip, PCA953X_CONF, 1, &data, 1)) + return -1; + printf("conf: "); + for (i = 7; i >= 0; i--) + printf("%c", data & (1 << i) ? 'i' : 'o'); + printf("\n"); + + if (i2c_read(chip, PCA953X_POL, 1, &data, 1)) + return -1; + printf("invert: "); + for (i = 7; i >= 0; i--) + printf("%c", data & (1 << i) ? '1' : '0'); + printf("\n"); + + if (i2c_read(chip, PCA953X_IN, 1, &data, 1)) + return -1; + printf("input: "); + for (i = 7; i >= 0; i--) + printf("%c", data & (1 << i) ? '1' : '0'); + printf("\n"); + + if (i2c_read(chip, PCA953X_OUT, 1, &data, 1)) + return -1; + printf("output: "); + for (i = 7; i >= 0; i--) + printf("%c", data & (1 << i) ? '1' : '0'); + printf("\n"); + + return 0; +} +#endif /* CONFIG_CMD_PCA953X_INFO */ + +cmd_tbl_t cmd_pca953x[] = { + U_BOOT_CMD_MKENT(device, 3, 0, (void *)PCA953X_CMD_DEVICE, "", ""), + U_BOOT_CMD_MKENT(output, 4, 0, (void *)PCA953X_CMD_OUTPUT, "", ""), + U_BOOT_CMD_MKENT(input, 3, 0, (void *)PCA953X_CMD_INPUT, "", ""), + U_BOOT_CMD_MKENT(invert, 4, 0, (void *)PCA953X_CMD_INVERT, "", ""), +#ifdef CONFIG_CMD_PCA953X_INFO + U_BOOT_CMD_MKENT(info, 2, 0, (void *)PCA953X_CMD_INFO, "", ""), +#endif +}; + +int do_pca953x(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + static uint8_t chip = CONFIG_SYS_I2C_PCA953X_ADDR; + int val; + ulong ul_arg2 = 0; + ulong ul_arg3 = 0; + cmd_tbl_t *c; + + c = find_cmd_tbl(argv[1], cmd_pca953x, ARRAY_SIZE(cmd_pca953x)); + + /* All commands but "device" require 'maxargs' arguments */ + if (!c || !((argc == (c->maxargs)) || + (((int)c->cmd == PCA953X_CMD_DEVICE) && + (argc == (c->maxargs - 1))))) { + printf("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + /* arg2 used as chip number or pin number */ + if (argc > 2) + ul_arg2 = simple_strtoul(argv[2], NULL, 16); + + /* arg3 used as pin or invert value */ + if (argc > 3) + ul_arg3 = simple_strtoul(argv[3], NULL, 16) & 0x1; + + switch ((int)c->cmd) { +#ifdef CONFIG_CMD_PCA953X_INFO + case PCA953X_CMD_INFO: + return pca953x_info(chip); +#endif + case PCA953X_CMD_DEVICE: + if (argc == 3) + chip = (uint8_t)ul_arg2; + printf("Current device address: 0x%x\n", chip); + return 0; + case PCA953X_CMD_INPUT: + pca953x_set_dir(chip, (1 << ul_arg2), + PCA953X_DIR_IN << ul_arg2); + val = (pca953x_get_val(chip) & (1 << ul_arg2)) != 0; + + printf("chip 0x%02x, pin 0x%lx = %d\n", chip, ul_arg2, val); + return val; + case PCA953X_CMD_OUTPUT: + pca953x_set_dir(chip, (1 << ul_arg2), + (PCA953X_DIR_OUT << ul_arg2)); + return pca953x_set_val(chip, (1 << ul_arg2), + (ul_arg3 << ul_arg2)); + case PCA953X_CMD_INVERT: + return pca953x_set_pol(chip, (1 << ul_arg2), + (ul_arg3 << ul_arg2)); + default: + /* We should never get here */ + return 1; + } +} + +U_BOOT_CMD( + pca953x, 5, 1, do_pca953x, + "pca953x - pca953x gpio access\n", + "device [dev]\n" + " - show or set current device address\n" +#ifdef CONFIG_CMD_PCA953X_INFO + "pca953x info\n" + " - display info for current chip\n" +#endif + "pca953x output pin 0|1\n" + " - set pin as output and drive low or high\n" + "pca953x invert pin 0|1\n" + " - disable/enable polarity inversion for reads\n" + "pca953x intput pin\n" + " - set pin as input and read value\n" +); + +#endif /* CONFIG_CMD_PCA953X */ diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 367c7d7fcd..3f318e02e2 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -718,7 +718,7 @@ static void fsl_elbc_ctrl_init(void) int board_nand_init(struct nand_chip *nand) { struct fsl_elbc_mtd *priv; - uint32_t br, or; + uint32_t br = 0, or = 0; if (!elbc_ctrl) { fsl_elbc_ctrl_init(); @@ -737,11 +737,13 @@ int board_nand_init(struct nand_chip *nand) * if we could pass more than one datum to the NAND driver... */ for (priv->bank = 0; priv->bank < MAX_BANKS; priv->bank++) { + phys_addr_t base_addr = virt_to_phys(nand->IO_ADDR_R); + br = in_be32(&elbc_ctrl->regs->bank[priv->bank].br); or = in_be32(&elbc_ctrl->regs->bank[priv->bank].or); if ((br & BR_V) && (br & BR_MSEL) == BR_MS_FCM && - (br & or & BR_BA) == (phys_addr_t)nand->IO_ADDR_R) + (br & or & BR_BA) == BR_PHYS_ADDR(base_addr)) break; } diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index ba05b762ed..94a65d4e72 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -460,8 +460,8 @@ static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip, struct nand_chip *chip = mtd->priv; if (!(chip->options & NAND_BBT_SCANNED)) { - chip->scan_bbt(mtd); chip->options |= NAND_BBT_SCANNED; + chip->scan_bbt(mtd); } if (!chip->bbt) diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index 1db42fd8d3..db68f26009 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -37,6 +37,11 @@ DECLARE_GLOBAL_DATA_PTR; #include #include +/* Freescale-specific PCI config registers */ +#define FSL_PCI_PBFR 0x44 +#define FSL_PCIE_CAP_ID 0x4c +#define FSL_PCIE_CFG_RDY 0x4b0 + void pciauto_prescan_setup_bridge(struct pci_controller *hose, pci_dev_t dev, int sub_bus); void pciauto_postscan_setup_bridge(struct pci_controller *hose, @@ -306,6 +311,30 @@ void fsl_pci_init(struct pci_controller *hose) } } +/* Enable inbound PCI config cycles for agent/endpoint interface */ +void fsl_pci_config_unlock(struct pci_controller *hose) +{ + pci_dev_t dev = PCI_BDF(hose->first_busno,0,0); + u8 agent; + u8 pcie_cap; + u16 pbfr; + + pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &agent); + if (!agent) + return; + + pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap); + if (pcie_cap != 0x0) { + /* PCIe - set CFG_READY bit of Configuration Ready Register */ + pci_hose_write_config_byte(hose, dev, FSL_PCIE_CFG_RDY, 0x1); + } else { + /* PCI - clear ACL bit of PBFR */ + pci_hose_read_config_word(hose, dev, FSL_PCI_PBFR, &pbfr); + pbfr &= ~0x20; + pci_hose_write_config_word(hose, dev, FSL_PCI_PBFR, pbfr); + } +} + #ifdef CONFIG_OF_BOARD_SETUP #include #include diff --git a/drivers/serial/serial_sh.c b/drivers/serial/serial_sh.c index 1d76a194a5..bfdb2ce77a 100644 --- a/drivers/serial/serial_sh.c +++ b/drivers/serial/serial_sh.c @@ -18,6 +18,7 @@ */ #include +#include #include #if defined(CONFIG_CONS_SCIF0) @@ -49,7 +50,7 @@ # define SCFRDR (vu_char *)(SCIF_BASE + 0x24) #else # define SCFTDR (vu_char *)(SCIF_BASE + 0xC) -# define SCFSR (vu_short *)(SCIF_BASE + 0x10) +# define SCFSR (vu_short *)(SCIF_BASE + 0x10) # define SCFRDR (vu_char *)(SCIF_BASE + 0x14) #endif @@ -64,7 +65,7 @@ #elif defined(CONFIG_CPU_SH7763) # if defined(CONFIG_CONS_SCIF2) # define SCSPTR (vu_short *)(SCIF_BASE + 0x20) -# define SCLSR (vu_short *)(SCIF_BASE + 0x24) +# define SCLSR (vu_short *)(SCIF_BASE + 0x24) # define LSR_ORER 1 # define FIFOLEVEL_MASK 0x1F # else @@ -90,7 +91,7 @@ defined(CONFIG_CPU_SH7722) || \ defined(CONFIG_CPU_SH7203) # define SCSPTR (vu_short *)(SCIF_BASE + 0x20) -# define SCLSR (vu_short *)(SCIF_BASE + 0x24) +# define SCLSR (vu_short *)(SCIF_BASE + 0x24) # define LSR_ORER 1 # define FIFOLEVEL_MASK 0x1F #elif defined(CONFIG_CPU_SH7720) @@ -106,42 +107,43 @@ /* SCBRR register value setting */ #if defined(CONFIG_CPU_SH7720) -# define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1) +# define SCBRR_VALUE(bps, clk) (((clk * 2) + 16 * bps) / (32 * bps) - 1) #elif defined(CONFIG_CPU_SH7723) && defined(CONFIG_SCIF_A) /* SH7723 SCIFA use bus clock. So clock *2 */ -# define SCBRR_VALUE(bps, clk) (((clk*2*2)+16*bps)/(32*bps)-1) +# define SCBRR_VALUE(bps, clk) (((clk * 2 * 2) + 16 * bps) / (32 * bps) - 1) #else /* Generic SuperH */ -# define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1) +# define SCBRR_VALUE(bps, clk) ((clk + 16 * bps) / (32 * bps) - 1) #endif -#define SCR_RE (1 << 4) -#define SCR_TE (1 << 5) +#define SCR_RE (1 << 4) +#define SCR_TE (1 << 5) #define FCR_RFRST (1 << 1) /* RFCL */ #define FCR_TFRST (1 << 2) /* TFCL */ -#define FSR_DR (1 << 0) -#define FSR_RDF (1 << 1) -#define FSR_FER (1 << 3) -#define FSR_BRK (1 << 4) -#define FSR_FER (1 << 3) -#define FSR_TEND (1 << 6) -#define FSR_ER (1 << 7) +#define FSR_DR (1 << 0) +#define FSR_RDF (1 << 1) +#define FSR_FER (1 << 3) +#define FSR_BRK (1 << 4) +#define FSR_FER (1 << 3) +#define FSR_TEND (1 << 6) +#define FSR_ER (1 << 7) /*----------------------------------------------------------------------*/ void serial_setbrg(void) { DECLARE_GLOBAL_DATA_PTR; - *SCBRR = SCBRR_VALUE(gd->baudrate, CONFIG_SYS_CLK_FREQ); + + writeb(SCBRR_VALUE(gd->baudrate, CONFIG_SYS_CLK_FREQ), SCBRR); } int serial_init(void) { - *SCSCR = (SCR_RE | SCR_TE); - *SCSMR = 0; - *SCSMR = 0; - *SCFCR = (FCR_RFRST | FCR_TFRST); - *SCFCR; - *SCFCR = 0; + writew((SCR_RE | SCR_TE), SCSCR); + writew(0, SCSMR); + writew(0, SCSMR); + writew((FCR_RFRST | FCR_TFRST), SCFCR); + readw(SCFCR); + writew(0, SCFCR); serial_setbrg(); return 0; @@ -150,9 +152,9 @@ int serial_init(void) static int serial_rx_fifo_level(void) { #if defined(SCRFDR) - return (*SCRFDR >> 0) & FIFOLEVEL_MASK; + return (readw(SCRFDR) >> 0) & FIFOLEVEL_MASK; #else - return (*SCFDR >> 0) & FIFOLEVEL_MASK; + return (readw(SCFDR) >> 0) & FIFOLEVEL_MASK; #endif } @@ -161,15 +163,15 @@ void serial_raw_putc(const char c) unsigned int fsr_bits_to_clear; while (1) { - if (*SCFSR & FSR_TEND) { /* Tx fifo is empty */ + if (readw(SCFSR) & FSR_TEND) { /* Tx fifo is empty */ fsr_bits_to_clear = FSR_TEND; break; } } - *SCFTDR = c; + writeb(c, SCFTDR); if (fsr_bits_to_clear != 0) - *SCFSR &= ~fsr_bits_to_clear; + writew(readw(SCFSR) & ~fsr_bits_to_clear, SCFSR); } void serial_putc(const char c) @@ -191,26 +193,25 @@ int serial_tstc(void) return serial_rx_fifo_level() ? 1 : 0; } -#define FSR_ERR_CLEAR 0x0063 -#define RDRF_CLEAR 0x00fc +#define FSR_ERR_CLEAR 0x0063 +#define RDRF_CLEAR 0x00fc void handle_error(void) { - - (void)*SCFSR; - *SCFSR = FSR_ERR_CLEAR; - (void)*SCLSR; - *SCLSR = 0x00; + readw(SCFSR); + writew(FSR_ERR_CLEAR, SCFSR); + readw(SCLSR); + writew(0x00, SCLSR); } int serial_getc_check(void) { unsigned short status; - status = *SCFSR; + status = readw(SCFSR); if (status & (FSR_FER | FSR_ER | FSR_BRK)) handle_error(); - if (*SCLSR & LSR_ORER) + if (readw(SCLSR) & LSR_ORER) handle_error(); return status & (FSR_DR | FSR_RDF); } @@ -223,15 +224,15 @@ int serial_getc(void) while (!serial_getc_check()) ; - ch = *SCFRDR; - status = *SCFSR; + ch = readb(SCFRDR); + status = readw(SCFSR); - *SCFSR = RDRF_CLEAR; + writew(RDRF_CLEAR, SCFSR); if (status & (FSR_FER | FSR_FER | FSR_ER | FSR_BRK)) handle_error(); - if (*SCLSR & LSR_ORER) + if (readw(SCLSR) & LSR_ORER) handle_error(); return ch; diff --git a/include/asm-arm/arch-at91rm9200/AT91RM9200.h b/include/asm-arm/arch-at91rm9200/AT91RM9200.h index 95db0177cd..00bae1c4d5 100644 --- a/include/asm-arm/arch-at91rm9200/AT91RM9200.h +++ b/include/asm-arm/arch-at91rm9200/AT91RM9200.h @@ -781,5 +781,32 @@ typedef struct _AT91S_PDC #define AT91C_PIOB_ODR ((AT91_REG *) 0xFFFFF614) /* (PIOB) Output Disable Registerr */ #define AT91C_PIOB_PDSR ((AT91_REG *) 0xFFFFF63C) /* (PIOB) Pin Data Status Register */ +#else +/* flash */ +#define AT91C_MC_PUIA 0xFFFFFF10 +#define AT91C_MC_PUP 0xFFFFFF50 +#define AT91C_MC_PUER 0xFFFFFF54 +#define AT91C_MC_ASR 0xFFFFFF04 +#define AT91C_MC_AASR 0xFFFFFF08 +#define AT91C_EBI_CFGR 0xFFFFFF64 +#define AT91C_SMC_CSR0 0xFFFFFF70 + +/* clocks */ +#define AT91C_PLLAR 0xFFFFFC28 +#define AT91C_PLLBR 0xFFFFFC2C +#define AT91C_MCKR 0xFFFFFC30 + +#define AT91C_BASE_CKGR 0xFFFFFC20 +#define AT91C_CKGR_MOR 0 + +/* sdram */ +#define AT91C_PIOC_ASR 0xFFFFF870 +#define AT91C_PIOC_BSR 0xFFFFF874 +#define AT91C_PIOC_PDR 0xFFFFF804 +#define AT91C_EBI_CSA 0xFFFFFF60 +#define AT91C_SDRC_CR 0xFFFFFF98 +#define AT91C_SDRC_MR 0xFFFFFF90 +#define AT91C_SDRC_TR 0xFFFFFF94 + #endif /* __ASSEMBLY__ */ #endif /* AT91RM9200_H */ diff --git a/include/asm-ppc/fsl_lbc.h b/include/asm-ppc/fsl_lbc.h index 51fc5c13b0..e492c62a8b 100644 --- a/include/asm-ppc/fsl_lbc.h +++ b/include/asm-ppc/fsl_lbc.h @@ -300,7 +300,10 @@ #define LCRR_EADC_2 0x00020000 #define LCRR_EADC_3 0x00030000 #define LCRR_EADC_4 0x00000000 -#define LCRR_CLKDIV 0x0000000F +/* CLKDIV is five bits only on 8536, 8572, and 8610, so far, but the fifth bit + * should always be zero on older parts that have a four bit CLKDIV. + */ +#define LCRR_CLKDIV 0x0000001F #define LCRR_CLKDIV_SHIFT 0 #define LCRR_CLKDIV_2 0x00000002 #define LCRR_CLKDIV_4 0x00000004 diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h index aade097fa4..2bb50b47f5 100644 --- a/include/asm-ppc/global_data.h +++ b/include/asm-ppc/global_data.h @@ -89,6 +89,9 @@ typedef struct global_data { #if defined(CONFIG_MPC837X) || defined(CONFIG_MPC8536) u32 sdhc_clk; #endif +#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) + u32 lbc_clk; +#endif /* CONFIG_MPC85xx || CONFIG_MPC86xx */ #if defined(CONFIG_MPC83XX) || defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) u32 i2c1_clk; u32 i2c2_clk; diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h index 64cb746b10..4ddad26e81 100644 --- a/include/asm-ppc/io.h +++ b/include/asm-ppc/io.h @@ -10,6 +10,10 @@ #include #include +#ifdef CONFIG_ADDR_MAP +#include +#endif + #define SIO_CONFIG_RA 0x398 #define SIO_CONFIG_RD 0x399 @@ -287,7 +291,11 @@ extern inline void out_be32(volatile unsigned __iomem *addr, int val) static inline void * map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags) { +#ifdef CONFIG_ADDR_MAP + return (void *)(addrmap_phys_to_virt(paddr)); +#else return (void *)((unsigned long)paddr); +#endif } /* @@ -300,7 +308,11 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags) static inline phys_addr_t virt_to_phys(void * vaddr) { +#ifdef CONFIG_ADDR_MAP + return addrmap_virt_to_phys(vaddr); +#else return (phys_addr_t)((unsigned long)vaddr); +#endif } #endif diff --git a/include/asm-ppc/mmu.h b/include/asm-ppc/mmu.h index 8975e6c90a..6d942d083a 100644 --- a/include/asm-ppc/mmu.h +++ b/include/asm-ppc/mmu.h @@ -431,6 +431,9 @@ extern void set_tlb(u8 tlb, u32 epn, u64 rpn, extern void disable_tlb(u8 esel); extern void invalidate_tlb(u8 tlb); extern void init_tlbs(void); +#ifdef CONFIG_ADDR_MAP +extern void init_addr_map(void); +#endif extern unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg); #define SET_TLB_ENTRY(_tlb, _epn, _rpn, _perms, _wimge, _ts, _esel, _sz, _iprot) \ diff --git a/include/asm-sh/macro.h b/include/asm-sh/macro.h new file mode 100644 index 0000000000..61f792a044 --- /dev/null +++ b/include/asm-sh/macro.h @@ -0,0 +1,52 @@ +/* + * Copyright (C) 2008 Yoshihiro Shimoda + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __MACRO_H__ +#define __MACRO_H__ +#ifdef __ASSEMBLY__ + +.macro write32, addr, data + mov.l \addr ,r1 + mov.l \data ,r0 + mov.l r0, @r1 +.endm + +.macro write16, addr, data + mov.l \addr ,r1 + mov.l \data ,r0 + mov.w r0, @r1 +.endm + +.macro write8, addr, data + mov.l \addr ,r1 + mov.l \data ,r0 + mov.b r0, @r1 +.endm + +.macro wait_timer, time + mov.l \time ,r3 +1: + nop + tst r3, r3 + bf/s 1b + dt r3 +.endm + +#endif /* __ASSEMBLY__ */ +#endif /* __MACRO_H__ */ diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h index e231fa7058..d0b4d11339 100644 --- a/include/configs/CPCI4052.h +++ b/include/configs/CPCI4052.h @@ -216,6 +216,8 @@ #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */ #define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ +#define CONFIG_PRAM 0 /* use pram variable to overwrite */ + /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h index 2319c58725..69c8c6eee7 100644 --- a/include/configs/CPCI405AB.h +++ b/include/configs/CPCI405AB.h @@ -92,6 +92,7 @@ #define CONFIG_CMD_I2C #define CONFIG_CMD_MII #define CONFIG_CMD_PING +#define CONFIG_CMD_BSP #define CONFIG_CMD_EEPROM @@ -212,6 +213,8 @@ #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */ #define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */ +#define CONFIG_PRAM 0 /* use pram variable to overwrite */ + /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 37c3f4200b..6c7a364545 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -92,6 +92,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) /* DDR Setup */ +#define CONFIG_SYS_DDR_TLB_START 9 #define CONFIG_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index 27517e5b1f..4bd3e0bd3d 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -273,11 +273,13 @@ * General PCI * Addresses are mapped 1-1. */ -#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 -#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE +#define CONFIG_SYS_PCI1_MEM_BUS 0x80000000 +#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BUS +#define CONFIG_SYS_PCI1_MEM_VIRT CONFIG_SYS_PCI1_MEM_BUS #define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI1_IO_BASE 0x00000000 +#define CONFIG_SYS_PCI1_IO_BUS 0x0000000 #define CONFIG_SYS_PCI1_IO_PHYS 0xe1000000 +#define CONFIG_SYS_PCI1_IO_VIRT 0xe1000000 #define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */ /* For RTL8139 */ @@ -285,18 +287,18 @@ #define _IO_BASE 0x00000000 /* controller 1, Base address 0xa000 */ -#define CONFIG_SYS_PCIE1_MEM_BASE 0xa0000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BASE +#define CONFIG_SYS_PCIE1_MEM_BUS 0xa0000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCIE1_IO_BASE 0x00000000 +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 #define CONFIG_SYS_PCIE1_IO_PHYS 0xe3000000 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00100000 /* 1M */ /* controller 2, Base Address 0x9000 */ -#define CONFIG_SYS_PCIE2_MEM_BASE 0x90000000 -#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BASE +#define CONFIG_SYS_PCIE2_MEM_BUS 0x90000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BUS #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCIE2_IO_BASE 0x00000000 /* reuse mem LAW */ +#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 /* reuse mem LAW */ #define CONFIG_SYS_PCIE2_IO_PHYS 0xe2000000 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00100000 /* 1M */ @@ -364,7 +366,7 @@ #define CONFIG_SYS_DBAT1L (CONFIG_SYS_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT \ | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT1U (CONFIG_SYS_PCI1_MEM_PHYS | BATU_BL_1G | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT1U (CONFIG_SYS_PCI1_MEM_VIRT | BATU_BL_1G | BATU_VS | BATU_VP) #define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) #define CONFIG_SYS_IBAT1U CONFIG_SYS_DBAT1U @@ -375,7 +377,7 @@ #define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT \ | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI1_IO_PHYS | BATU_BL_16M | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI1_IO_VIRT | BATU_BL_16M | BATU_VS | BATU_VP) #define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) #define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U diff --git a/include/configs/XPEDITE5200.h b/include/configs/XPEDITE5200.h new file mode 100644 index 0000000000..1df6855cca --- /dev/null +++ b/include/configs/XPEDITE5200.h @@ -0,0 +1,546 @@ +/* + * Copyright 2008 Extreme Engineering Solutions, Inc. + * Copyright 2004-2008 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * xpedite5200 board configuration file + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_BOOKE 1 /* BOOKE */ +#define CONFIG_E500 1 /* BOOKE e500 family */ +#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ +#define CONFIG_MPC8548 1 +#define CONFIG_XPEDITE5200 1 +#define CONFIG_SYS_BOARD_NAME "XPedite5200" +#define CONFIG_BOARD_EARLY_INIT_R /* Call board_pre_init */ +#define CONFIG_RELOC_FIXUP_WORKS /* Fully relocate to SDRAM */ + +#define CONFIG_PCI 1 /* Enable PCI/PCIE */ +#define CONFIG_PCI_PNP 1 /* do pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ +#define CONFIG_PCI1 1 /* PCI controller 1 */ +#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ +#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ +#define CONFIG_FSL_LAW 1 /* Use common FSL init code */ + +/* + * DDR config + */ +#define CONFIG_FSL_DDR2 +#undef CONFIG_FSL_DDR_INTERACTIVE +#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ +#define CONFIG_DDR_SPD +#define CONFIG_MEM_INIT_VALUE 0xdeadbeef +#define SPD_EEPROM_ADDRESS 0x54 +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL 2 +#define CONFIG_DDR_ECC +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER +#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CONFIG_VERY_BIG_RAM + +#define CONFIG_SYS_CLK_FREQ 66666666 + +/* + * These can be toggled for performance analysis, otherwise use default. + */ +#define CONFIG_L2_CACHE /* toggle L2 cache */ +#define CONFIG_BTB /* toggle branch predition */ +#define CONFIG_ENABLE_36BIT_PHYS 1 + +/* + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + */ +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ +#define CONFIG_SYS_CCSRBAR 0xef000000 /* relocated CCSRBAR */ +#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ +#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ +#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR + 0x8000) + +/* + * Diagnostics + */ +#define CONFIG_SYS_ALT_MEMTEST +#define CONFIG_SYS_MEMTEST_START 0x10000000 +#define CONFIG_SYS_MEMTEST_END 0x20000000 + +/* + * Memory map + * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable + * 0x8000_0000 0xbfff_ffff PCI1 Mem 1G non-cacheable + * 0xe000_0000 0xe7ff_ffff SRAM/SSRAM/L1 Cache 128M non-cacheable + * 0xe800_0000 0xe87f_ffff PCI1 IO 8M non-cacheable + * 0xef00_0000 0xef0f_ffff CCSR/IMMR 1M non-cacheable + * 0xef80_0000 0xef8f_ffff NAND Flash 1M non-cacheable + * 0xf800_0000 0xfbff_ffff NOR Flash 2 64M non-cacheable + * 0xfc00_0000 0xffff_ffff NOR Flash 1 64M non-cacheable + */ + +#define CONFIG_SYS_LBC_LCRR (LCRR_CLKDIV_4 | LCRR_EADC_3) + +/* + * NAND flash configuration + */ +#define CONFIG_SYS_NAND_BASE 0xef800000 +#define CONFIG_SYS_NAND_BASE2 0xef840000 /* Unused at this time */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_NAND_ACTL +#define CONFIG_SYS_NAND_ACTL_CLE (1 << 3) /* ADDR3 is CLE */ +#define CONFIG_SYS_NAND_ACTL_ALE (1 << 4) /* ADDR4 is ALE */ +#define CONFIG_SYS_NAND_ACTL_NCE (0) /* NCE not controlled by ADDR */ +#define CONFIG_SYS_NAND_ACTL_DELAY 25 + +/* + * NOR flash configuration + */ +#define CONFIG_SYS_FLASH_BASE 0xfc000000 +#define CONFIG_SYS_FLASH_BASE2 0xf8000000 +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2} +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_AUTOPROTECT_LIST { {0xfff40000, 0xc0000}, \ + {0xfbf40000, 0xc0000} } +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ + +/* + * Chip select configuration + */ +/* NOR Flash 0 on CS0 */ +#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ + BR_PS_16 | \ + BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_64MB | \ + OR_GPCM_ACS_DIV4 | \ + OR_GPCM_SCY_8) + +/* NOR Flash 1 on CS1 */ +#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_FLASH_BASE2 | \ + BR_PS_16 | \ + BR_V) +#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR0_PRELIM + +/* NAND flash on CS2 */ +#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_NAND_BASE | \ + BR_PS_8 | \ + BR_V) + +/* NAND flash on CS2 */ +#define CONFIG_SYS_OR2_PRELIM (OR_AM_256KB | \ + OR_GPCM_BCTLD | \ + OR_GPCM_CSNT | \ + OR_GPCM_ACS_DIV4 | \ + OR_GPCM_SCY_4 | \ + OR_GPCM_TRLX | \ + OR_GPCM_EHTR) + +/* NAND flash on CS3 */ +#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_NAND_BASE2 | \ + BR_PS_8 | \ + BR_V) +#define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_OR2_PRELIM + +/* + * Use L1 as initial stack + */ +#define CONFIG_SYS_INIT_RAM_LOCK 1 +#define CONFIG_SYS_INIT_RAM_ADDR 0xe0000000 +#define CONFIG_SYS_INIT_RAM_END 0x4000 + +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 KB for Mon */ +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} +#define CONFIG_BAUDRATE 115200 +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/* + * Use the HUSH parser + */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +/* + * Pass open firmware flat tree + */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 + +#define CONFIG_SYS_64BIT_VSPRINTF 1 +#define CONFIG_SYS_64BIT_STRTOUL 1 + +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_OFFSET 0x3000 +#define CONFIG_SYS_I2C2_OFFSET 0x3100 +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_CMD_TREE + +/* I2C EEPROM */ +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* 64 byte pages */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* take up to 10 msec */ + +/* I2C RTC */ +#define CONFIG_RTC_M41T11 1 +#define CONFIG_SYS_I2C_RTC_ADDR 0x68 +#define CONFIG_SYS_M41T11_BASE_YEAR 2000 + +/* GPIO */ +#define CONFIG_PCA953X +#define CONFIG_SYS_I2C_PCA953X_ADDR0 0x18 +#define CONFIG_SYS_I2C_PCA953X_ADDR1 0x19 +#define CONFIG_SYS_I2C_PCA953X_ADDR CONFIG_SYS_I2C_PCA953X_ADDR0 + +/* PCA957 @ 0x18 */ +#define CONFIG_SYS_PCA953X_BRD_CFG0 0x01 +#define CONFIG_SYS_PCA953X_BRD_CFG1 0x02 +#define CONFIG_SYS_PCA953X_BRD_CFG2 0x04 +#define CONFIG_SYS_PCA953X_XMC_ROOT0 0x08 +#define CONFIG_SYS_PCA953X_FLASH_PASS_CS 0x10 +#define CONFIG_SYS_PCA953X_FLASH_WP 0x20 +#define CONFIG_SYS_PCA953X_MONARCH 0x40 +#define CONFIG_SYS_PCA953X_EREADY 0x80 + +/* PCA957 @ 0x19 */ +#define CONFIG_SYS_PCA953X_P14_IO0 0x01 +#define CONFIG_SYS_PCA953X_P14_IO1 0x02 +#define CONFIG_SYS_PCA953X_P14_IO2 0x04 +#define CONFIG_SYS_PCA953X_P14_IO3 0x08 +#define CONFIG_SYS_PCA953X_P14_IO4 0x10 +#define CONFIG_SYS_PCA953X_P14_IO5 0x20 +#define CONFIG_SYS_PCA953X_P14_IO6 0x40 +#define CONFIG_SYS_PCA953X_P14_IO7 0x80 + +/* + * General PCI + * Memory space is mapped 1-1, but I/O space must start from 0. + */ +#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 +#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE +#define CONFIG_SYS_PCI1_MEM_SIZE 0x40000000 /* 1G */ +#define CONFIG_SYS_PCI1_IO_BASE 0x00000000 +#define CONFIG_SYS_PCI1_IO_PHYS 0xe8000000 +#define CONFIG_SYS_PCI1_IO_SIZE 0x00800000 /* 1M */ + +/* + * Networking options + */ +#define CONFIG_TSEC_ENET /* tsec ethernet support */ +#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ +#define CONFIG_NET_MULTI 1 +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_ETHPRIME "eTSEC1" + +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC1" +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC1_PHY_ADDR 1 +#define TSEC1_PHYIDX 0 +#define CONFIG_HAS_ETH0 + +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "eTSEC2" +#define TSEC2_FLAGS TSEC_GIGABIT +#define TSEC2_PHY_ADDR 2 +#define TSEC2_PHYIDX 0 +#define CONFIG_HAS_ETH1 + +#define CONFIG_TSEC3 1 +#define CONFIG_TSEC3_NAME "eTSEC3" +#define TSEC3_FLAGS TSEC_GIGABIT +#define TSEC3_PHY_ADDR 3 +#define TSEC3_PHYIDX 0 +#define CONFIG_HAS_ETH2 + +#define CONFIG_TSEC4 1 +#define CONFIG_TSEC4_NAME "eTSEC4" +#define TSEC4_FLAGS TSEC_GIGABIT +#define TSEC4_PHY_ADDR 4 +#define TSEC4_PHYIDX 0 +#define CONFIG_HAS_ETH3 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY + +/* + * Command configuration. + */ +#include + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_I2C +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCA953X +#define CONFIG_CMD_PCA953X_INFO +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_SNTP + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */ +#define CONFIG_BOOTDELAY 3 /* -1 disables auto-boot */ +#define CONFIG_PANIC_HANG /* do not reset board on panic */ +#define CONFIG_PREBOOT /* enable preboot variable */ +#define CONFIG_FIT 1 +#define CONFIG_FIT_VERBOSE 1 +#define CONFIG_INTEGRITY /* support booting INTEGRITY OS */ +#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 16 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ + +/* + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +/* + * Environment Configuration + */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128k (one sector) for env */ +#define CONFIG_ENV_SIZE 0x8000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - (256 * 1024)) + +/* + * Flash memory map: + * fff80000 - ffffffff Pri U-Boot (512 KB) + * fff40000 - fff7ffff Pri U-Boot Environment (256 KB) + * fff00000 - fff3ffff Pri FDT (256KB) + * fef00000 - ffefffff Pri OS image (16MB) + * fc000000 - feefffff Pri OS Use/Filesystem (47MB) + * + * fbf80000 - fbffffff Sec U-Boot (512 KB) + * fbf40000 - fbf7ffff Sec U-Boot Environment (256 KB) + * fbf00000 - fbf3ffff Sec FDT (256KB) + * faf00000 - fbefffff Sec OS image (16MB) + * f8000000 - faefffff Sec OS Use/Filesystem (47MB) + */ +#define CONFIG_UBOOT1_ENV_ADDR MK_STR(0xfff80000) +#define CONFIG_UBOOT2_ENV_ADDR MK_STR(0xfbf80000) +#define CONFIG_FDT1_ENV_ADDR MK_STR(0xfff00000) +#define CONFIG_FDT2_ENV_ADDR MK_STR(0xfbf00000) +#define CONFIG_OS1_ENV_ADDR MK_STR(0xfef00000) +#define CONFIG_OS2_ENV_ADDR MK_STR(0xfaf00000) + +#define CONFIG_PROG_UBOOT1 \ + "$download_cmd $loadaddr $ubootfile; " \ + "if test $? -eq 0; then " \ + "protect off "CONFIG_UBOOT1_ENV_ADDR" +80000; " \ + "erase "CONFIG_UBOOT1_ENV_ADDR" +80000; " \ + "cp.w $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 40000; " \ + "protect on "CONFIG_UBOOT1_ENV_ADDR" +80000; " \ + "cmp.b $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 80000; " \ + "if test $? -ne 0; then " \ + "echo PROGRAM FAILED; " \ + "else; " \ + "echo PROGRAM SUCCEEDED; " \ + "fi; " \ + "else; " \ + "echo DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_PROG_UBOOT2 \ + "$download_cmd $loadaddr $ubootfile; " \ + "if test $? -eq 0; then " \ + "protect off "CONFIG_UBOOT2_ENV_ADDR" +80000; " \ + "erase "CONFIG_UBOOT2_ENV_ADDR" +80000; " \ + "cp.w $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 40000; " \ + "protect on "CONFIG_UBOOT2_ENV_ADDR" +80000; " \ + "cmp.b $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 80000; " \ + "if test $? -ne 0; then " \ + "echo PROGRAM FAILED; " \ + "else; " \ + "echo PROGRAM SUCCEEDED; " \ + "fi; " \ + "else; " \ + "echo DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_BOOT_OS_NET \ + "$download_cmd $osaddr $osfile; " \ + "if test $? -eq 0; then " \ + "if test -n $fdtaddr; then " \ + "$download_cmd $fdtaddr $fdtfile; " \ + "if test $? -eq 0; then " \ + "bootm $osaddr - $fdtaddr; " \ + "else; " \ + "echo FDT DOWNLOAD FAILED; " \ + "fi; " \ + "else; " \ + "bootm $osaddr; " \ + "fi; " \ + "else; " \ + "echo OS DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_PROG_OS1 \ + "$download_cmd $osaddr $osfile; " \ + "if test $? -eq 0; then " \ + "erase "CONFIG_OS1_ENV_ADDR" +$filesize; " \ + "cp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; " \ + "cmp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; " \ + "if test $? -ne 0; then " \ + "echo OS PROGRAM FAILED; " \ + "else; " \ + "echo OS PROGRAM SUCCEEDED; " \ + "fi; " \ + "else; " \ + "echo OS DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_PROG_OS2 \ + "$download_cmd $osaddr $osfile; " \ + "if test $? -eq 0; then " \ + "erase "CONFIG_OS2_ENV_ADDR" +$filesize; " \ + "cp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; " \ + "cmp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; " \ + "if test $? -ne 0; then " \ + "echo OS PROGRAM FAILED; " \ + "else; " \ + "echo OS PROGRAM SUCCEEDED; " \ + "fi; " \ + "else; " \ + "echo OS DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_PROG_FDT1 \ + "$download_cmd $fdtaddr $fdtfile; " \ + "if test $? -eq 0; then " \ + "erase "CONFIG_FDT1_ENV_ADDR" +$filesize;" \ + "cp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; " \ + "cmp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; " \ + "if test $? -ne 0; then " \ + "echo FDT PROGRAM FAILED; " \ + "else; " \ + "echo FDT PROGRAM SUCCEEDED; " \ + "fi; " \ + "else; " \ + "echo FDT DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_PROG_FDT2 \ + "$download_cmd $fdtaddr $fdtfile; " \ + "if test $? -eq 0; then " \ + "erase "CONFIG_FDT2_ENV_ADDR" +$filesize;" \ + "cp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; " \ + "cmp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; " \ + "if test $? -ne 0; then " \ + "echo FDT PROGRAM FAILED; " \ + "else; " \ + "echo FDT PROGRAM SUCCEEDED; " \ + "fi; " \ + "else; " \ + "echo FDT DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "autoload=yes\0" \ + "download_cmd=tftp\0" \ + "console_args=console=ttyS0,115200\0" \ + "root_args=root=/dev/nfs rw\0" \ + "misc_args=ip=on\0" \ + "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \ + "bootfile=/home/user/file\0" \ + "osfile=/home/user/uImage-XPedite5200\0" \ + "fdtfile=/home/user/xpedite5200.dtb\0" \ + "ubootfile=/home/user/u-boot.bin\0" \ + "fdtaddr=c00000\0" \ + "osaddr=0x1000000\0" \ + "loadaddr=0x1000000\0" \ + "prog_uboot1="CONFIG_PROG_UBOOT1"\0" \ + "prog_uboot2="CONFIG_PROG_UBOOT2"\0" \ + "prog_os1="CONFIG_PROG_OS1"\0" \ + "prog_os2="CONFIG_PROG_OS2"\0" \ + "prog_fdt1="CONFIG_PROG_FDT1"\0" \ + "prog_fdt2="CONFIG_PROG_FDT2"\0" \ + "bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0" \ + "bootcmd_flash1=run set_bootargs; " \ + "bootm "CONFIG_OS1_ENV_ADDR" - "CONFIG_FDT1_ENV_ADDR"\0"\ + "bootcmd_flash2=run set_bootargs; " \ + "bootm "CONFIG_OS2_ENV_ADDR" - "CONFIG_FDT2_ENV_ADDR"\0"\ + "bootcmd=run bootcmd_flash1\0" +#endif /* __CONFIG_H */ diff --git a/include/configs/XPEDITE5370.h b/include/configs/XPEDITE5370.h new file mode 100644 index 0000000000..3bc0fe8f67 --- /dev/null +++ b/include/configs/XPEDITE5370.h @@ -0,0 +1,589 @@ +/* + * Copyright 2008 Extreme Engineering Solutions, Inc. + * Copyright 2007-2008 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * xpedite5370 board configuration file + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_BOOKE 1 /* BOOKE */ +#define CONFIG_E500 1 /* BOOKE e500 family */ +#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ +#define CONFIG_MPC8572 1 +#define CONFIG_XPEDITE5370 1 +#define CONFIG_SYS_BOARD_NAME "XPedite5370" +#define CONFIG_NUM_CPUS 2 /* 2 Cores */ +#define CONFIG_BOARD_EARLY_INIT_R /* Call board_pre_init */ +#define CONFIG_RELOC_FIXUP_WORKS /* Fully relocate to SDRAM */ + +#define CONFIG_PCI 1 /* Enable PCI/PCIE */ +#define CONFIG_PCI_PNP 1 /* do pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ +#define CONFIG_PCIE1 1 /* PCIE controler 1 */ +#define CONFIG_PCIE2 1 /* PCIE controler 2 */ +#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ +#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ +#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ +#define CONFIG_FSL_LAW 1 /* Use common FSL init code */ + +/* + * DDR config + */ +#define CONFIG_FSL_DDR2 +#undef CONFIG_FSL_DDR_INTERACTIVE +#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ +#define CONFIG_DDR_SPD +#define CONFIG_MEM_INIT_VALUE 0xdeadbeef +#define SPD_EEPROM_ADDRESS1 0x54 /* Both channels use the */ +#define SPD_EEPROM_ADDRESS2 0x54 /* same SPD data */ +#define SPD_EEPROM_OFFSET 0x200 /* OFFSET of SPD in EEPROM */ +#define CONFIG_NUM_DDR_CONTROLLERS 2 +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL 1 +#define CONFIG_DDR_ECC +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER +#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CONFIG_VERY_BIG_RAM + +#ifndef __ASSEMBLY__ +extern unsigned long get_board_sys_clk(unsigned long dummy); +extern unsigned long get_board_ddr_clk(unsigned long dummy); +#endif + +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /* sysclk for MPC85xx */ +#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk(0) /* ddrclk for MPC85xx */ + +/* + * These can be toggled for performance analysis, otherwise use default. + */ +#define CONFIG_L2_CACHE /* toggle L2 cache */ +#define CONFIG_BTB /* toggle branch predition */ +#define CONFIG_ENABLE_36BIT_PHYS 1 + +/* + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + */ +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ +#define CONFIG_SYS_CCSRBAR 0xef000000 /* relocated CCSRBAR */ +#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ +#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ +#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR + 0xa000) +#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR + 0x9000) + +/* + * Diagnostics + */ +#define CONFIG_SYS_ALT_MEMTEST +#define CONFIG_SYS_MEMTEST_START 0x10000000 +#define CONFIG_SYS_MEMTEST_END 0x20000000 + +/* + * Memory map + * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable + * 0x8000_0000 0xbfff_ffff PCIe1 Mem 1G non-cacheable + * 0xc000_0000 0xcfff_ffff PCIe2 Mem 256M non-cacheable + * 0xe000_0000 0xe7ff_ffff SRAM/SSRAM/L1 Cache 128M non-cacheable + * 0xe800_0000 0xe87f_ffff PCIe1 IO 8M non-cacheable + * 0xe880_0000 0xe8ff_ffff PCIe2 IO 8M non-cacheable + * 0xef00_0000 0xef0f_ffff CCSR/IMMR 1M non-cacheable + * 0xef80_0000 0xef8f_ffff NAND Flash 1M non-cacheable + * 0xf000_0000 0xf7ff_ffff NOR Flash 2 128M non-cacheable + * 0xf800_0000 0xffff_ffff NOR Flash 1 128M non-cacheable + */ + +#define CONFIG_SYS_LBC_LCRR (LCRR_CLKDIV_4 | LCRR_EADC_3) + +/* + * NAND flash configuration + */ +#define CONFIG_SYS_NAND_BASE 0xef800000 +#define CONFIG_SYS_NAND_BASE2 0xef840000 /* Unused at this time */ + +/* + * NOR flash configuration + */ +#define CONFIG_SYS_FLASH_BASE 0xf8000000 +#define CONFIG_SYS_FLASH_BASE2 0xf0000000 +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2} +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_AUTOPROTECT_LIST { {0xfff40000, 0xc0000}, \ + {0xf7f40000, 0xc0000} } +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ + +/* + * Chip select configuration + */ +/* NOR Flash 0 on CS0 */ +#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ + BR_PS_16 | \ + BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_128MB | \ + OR_GPCM_CSNT | \ + OR_GPCM_XACS | \ + OR_GPCM_ACS_DIV2 | \ + OR_GPCM_SCY_8 | \ + OR_GPCM_TRLX | \ + OR_GPCM_EHTR | \ + OR_GPCM_EAD) + +/* NOR Flash 1 on CS1 */ +#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_FLASH_BASE2 | \ + BR_PS_16 | \ + BR_V) +#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR0_PRELIM + +/* NAND flash on CS2 */ +#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_NAND_BASE | \ + (2< " + +/* + * Pass open firmware flat tree + */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 + +#define CONFIG_SYS_64BIT_VSPRINTF 1 +#define CONFIG_SYS_64BIT_STRTOUL 1 + +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_OFFSET 0x3000 +#define CONFIG_SYS_I2C2_OFFSET 0x3100 +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_CMD_TREE + +/* PEX8518 slave I2C interface */ +#define CONFIG_SYS_I2C_PEX8518_ADDR 0x70 + +/* I2C DS1631 temperature sensor */ +#define CONFIG_SYS_I2C_DS1621_ADDR 0x48 +#define CONFIG_DTT_DS1621 +#define CONFIG_DTT_SENSORS { 0 } + +/* I2C EEPROM - AT24C128B */ +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* 64 byte pages */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* take up to 10 msec */ + +/* I2C RTC */ +#define CONFIG_RTC_M41T11 1 +#define CONFIG_SYS_I2C_RTC_ADDR 0x68 +#define CONFIG_SYS_M41T11_BASE_YEAR 2000 + +/* GPIO/EEPROM/SRAM */ +#define CONFIG_DS4510 +#define CONFIG_SYS_I2C_DS4510_ADDR 0x51 + +/* GPIO */ +#define CONFIG_PCA953X +#define CONFIG_SYS_I2C_PCA953X_ADDR0 0x18 +#define CONFIG_SYS_I2C_PCA953X_ADDR1 0x1c +#define CONFIG_SYS_I2C_PCA953X_ADDR2 0x1e +#define CONFIG_SYS_I2C_PCA953X_ADDR3 0x1f +#define CONFIG_SYS_I2C_PCA953X_ADDR CONFIG_SYS_I2C_PCA953X_ADDR0 + +/* + * PU = pulled high, PD = pulled low + * I = input, O = output, IO = input/output + */ +/* PCA9557 @ 0x18*/ +#define CONFIG_SYS_PCA953X_C0_SER0_EN 0x01 /* PU; UART0 enable (1: enabled) */ +#define CONFIG_SYS_PCA953X_C0_SER0_MODE 0x02 /* PU; UART0 serial mode select */ +#define CONFIG_SYS_PCA953X_C0_SER1_EN 0x04 /* PU; UART1 enable (1: enabled) */ +#define CONFIG_SYS_PCA953X_C0_SER1_MODE 0x08 /* PU; UART1 serial mode select */ +#define CONFIG_SYS_PCA953X_C0_FLASH_PASS_CS 0x10 /* PU; Boot flash CS select */ +#define CONFIG_SYS_PCA953X_NVM_WP 0x20 /* PU; Set to 0 to enable NVM writing */ +#define CONFIG_SYS_PCA953X_C0_VCORE_VID2 0x40 /* VID2 of ISL6262 */ +#define CONFIG_SYS_PCA953X_C0_VCORE_VID3 0x80 /* VID3 of ISL6262 */ + +/* PCA9557 @ 0x1c*/ +#define CONFIG_SYS_PCA953X_XMC0_ROOT0 0x01 /* PU; Low if XMC is RC */ +#define CONFIG_SYS_PCA953X_XMC0_MVMR0 0x02 /* XMC EEPROM write protect */ +#define CONFIG_SYS_PCA953X_XMC0_WAKE 0x04 /* PU; XMC wake */ +#define CONFIG_SYS_PCA953X_XMC0_BIST 0x08 /* PU; XMC built in self test */ +#define CONFIG_SYS_PCA953X_XMC_PRESENT 0x10 /* PU; Low if XMC module installed */ +#define CONFIG_SYS_PCA953X_PMC_PRESENT 0x20 /* PU; Low if PMC module installed */ +#define CONFIG_SYS_PCA953X_PMC0_MONARCH 0x40 /* PMC monarch mode enable */ +#define CONFIG_SYS_PCA953X_PMC0_EREADY 0x80 /* PU; PMC PCI eready */ + +/* PCA9557 @ 0x1e*/ +#define CONFIG_SYS_PCA953X_P0_GA0 0x01 /* PU; VPX Geographical address */ +#define CONFIG_SYS_PCA953X_P0_GA1 0x02 /* PU; VPX Geographical address */ +#define CONFIG_SYS_PCA953X_P0_GA2 0x04 /* PU; VPX Geographical address */ +#define CONFIG_SYS_PCA953X_P0_GA3 0x08 /* PU; VPX Geographical address */ +#define CONFIG_SYS_PCA953X_P0_GA4 0x10 /* PU; VPX Geographical address */ +#define CONFIG_SYS_PCA953X_P0_GAP 0x20 /* PU; tied to VPX P0.GAP */ +#define CONFIG_SYS_PCA953X_P1_SYSEN 0x80 /* PU; Pulled high; tied to VPX P1.SYSCON */ + +/* PCA9557 @ 0x1f */ +#define CONFIG_SYS_PCA953X_GPIO_VPX0 0x01 /* PU */ +#define CONFIG_SYS_PCA953X_GPIO_VPX1 0x02 /* PU */ +#define CONFIG_SYS_PCA953X_GPIO_VPX2 0x04 /* PU */ +#define CONFIG_SYS_PCA953X_GPIO_VPX3 0x08 /* PU */ +#define CONFIG_SYS_PCA953X_VPX_FRU_WRCTL 0x10 /* PD; I2C master source for FRU SEEPROM */ + +/* + * General PCI + * Memory space is mapped 1-1, but I/O space must start from 0. + */ +/* PCIE1 - VPX P1 */ +#define CONFIG_SYS_PCIE1_MEM_BASE 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BASE +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x40000000 /* 1G */ +#define CONFIG_SYS_PCIE1_IO_BASE 0x00000000 +#define CONFIG_SYS_PCIE1_IO_PHYS 0xe8000000 +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */ + +/* PCIE2 - PEX8518 */ +#define CONFIG_SYS_PCIE2_MEM_BASE 0xc0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BASE +#define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCIE2_IO_BASE 0x00000000 +#define CONFIG_SYS_PCIE2_IO_PHYS 0xe8800000 +#define CONFIG_SYS_PCIE2_IO_SIZE 0x00800000 /* 8M */ + +/* + * Networking options + */ +#define CONFIG_TSEC_ENET /* tsec ethernet support */ +#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ +#define CONFIG_NET_MULTI 1 +#define CONFIG_TSEC_TBI +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ +#define CONFIG_ETHPRIME "eTSEC2" + +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC1" +#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC1_PHY_ADDR 1 +#define TSEC1_PHYIDX 0 +#define CONFIG_HAS_ETH0 + +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "eTSEC2" +#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC2_PHY_ADDR 2 +#define TSEC2_PHYIDX 0 +#define CONFIG_HAS_ETH1 + +/* + * Command configuration. + */ +#include + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DS4510 +#define CONFIG_CMD_DS4510_INFO +#define CONFIG_CMD_DTT +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_I2C +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCA953X +#define CONFIG_CMD_PCA953X_INFO +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_SNTP + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */ +#define CONFIG_BOOTDELAY 3 /* -1 disables auto-boot */ +#define CONFIG_PANIC_HANG /* do not reset board on panic */ +#define CONFIG_PREBOOT /* enable preboot variable */ +#define CONFIG_FIT 1 +#define CONFIG_FIT_VERBOSE 1 +#define CONFIG_INTEGRITY /* support booting INTEGRITY OS */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 16 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ + +/* + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +/* + * Environment Configuration + */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128k (one sector) for env */ +#define CONFIG_ENV_SIZE 0x8000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - (256 * 1024)) + +/* + * Flash memory map: + * fff80000 - ffffffff Pri U-Boot (512 KB) + * fff40000 - fff7ffff Pri U-Boot Environment (256 KB) + * fff00000 - fff3ffff Pri FDT (256KB) + * fef00000 - ffefffff Pri OS image (16MB) + * f8000000 - feefffff Pri OS Use/Filesystem (111MB) + * + * f7f80000 - f7ffffff Sec U-Boot (512 KB) + * f7f40000 - f7f7ffff Sec U-Boot Environment (256 KB) + * f7f00000 - f7f3ffff Sec FDT (256KB) + * f6f00000 - f7efffff Sec OS image (16MB) + * f0000000 - f6efffff Sec OS Use/Filesystem (111MB) + */ +#define CONFIG_UBOOT1_ENV_ADDR MK_STR(0xfff80000) +#define CONFIG_UBOOT2_ENV_ADDR MK_STR(0xf7f80000) +#define CONFIG_FDT1_ENV_ADDR MK_STR(0xfff00000) +#define CONFIG_FDT2_ENV_ADDR MK_STR(0xf7f00000) +#define CONFIG_OS1_ENV_ADDR MK_STR(0xfef00000) +#define CONFIG_OS2_ENV_ADDR MK_STR(0xf6f00000) + +#define CONFIG_PROG_UBOOT1 \ + "$download_cmd $loadaddr $ubootfile; " \ + "if test $? -eq 0; then " \ + "protect off "CONFIG_UBOOT1_ENV_ADDR" +80000; " \ + "erase "CONFIG_UBOOT1_ENV_ADDR" +80000; " \ + "cp.w $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 40000; " \ + "protect on "CONFIG_UBOOT1_ENV_ADDR" +80000; " \ + "cmp.b $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 80000; " \ + "if test $? -ne 0; then " \ + "echo PROGRAM FAILED; " \ + "else; " \ + "echo PROGRAM SUCCEEDED; " \ + "fi; " \ + "else; " \ + "echo DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_PROG_UBOOT2 \ + "$download_cmd $loadaddr $ubootfile; " \ + "if test $? -eq 0; then " \ + "protect off "CONFIG_UBOOT2_ENV_ADDR" +80000; " \ + "erase "CONFIG_UBOOT2_ENV_ADDR" +80000; " \ + "cp.w $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 40000; " \ + "protect on "CONFIG_UBOOT2_ENV_ADDR" +80000; " \ + "cmp.b $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 80000; " \ + "if test $? -ne 0; then " \ + "echo PROGRAM FAILED; " \ + "else; " \ + "echo PROGRAM SUCCEEDED; " \ + "fi; " \ + "else; " \ + "echo DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_BOOT_OS_NET \ + "$download_cmd $osaddr $osfile; " \ + "if test $? -eq 0; then " \ + "if test -n $fdtaddr; then " \ + "$download_cmd $fdtaddr $fdtfile; " \ + "if test $? -eq 0; then " \ + "bootm $osaddr - $fdtaddr; " \ + "else; " \ + "echo FDT DOWNLOAD FAILED; " \ + "fi; " \ + "else; " \ + "bootm $osaddr; " \ + "fi; " \ + "else; " \ + "echo OS DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_PROG_OS1 \ + "$download_cmd $osaddr $osfile; " \ + "if test $? -eq 0; then " \ + "erase "CONFIG_OS1_ENV_ADDR" +$filesize; " \ + "cp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; " \ + "cmp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; " \ + "if test $? -ne 0; then " \ + "echo OS PROGRAM FAILED; " \ + "else; " \ + "echo OS PROGRAM SUCCEEDED; " \ + "fi; " \ + "else; " \ + "echo OS DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_PROG_OS2 \ + "$download_cmd $osaddr $osfile; " \ + "if test $? -eq 0; then " \ + "erase "CONFIG_OS2_ENV_ADDR" +$filesize; " \ + "cp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; " \ + "cmp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; " \ + "if test $? -ne 0; then " \ + "echo OS PROGRAM FAILED; " \ + "else; " \ + "echo OS PROGRAM SUCCEEDED; " \ + "fi; " \ + "else; " \ + "echo OS DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_PROG_FDT1 \ + "$download_cmd $fdtaddr $fdtfile; " \ + "if test $? -eq 0; then " \ + "erase "CONFIG_FDT1_ENV_ADDR" +$filesize;" \ + "cp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; " \ + "cmp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; " \ + "if test $? -ne 0; then " \ + "echo FDT PROGRAM FAILED; " \ + "else; " \ + "echo FDT PROGRAM SUCCEEDED; " \ + "fi; " \ + "else; " \ + "echo FDT DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_PROG_FDT2 \ + "$download_cmd $fdtaddr $fdtfile; " \ + "if test $? -eq 0; then " \ + "erase "CONFIG_FDT2_ENV_ADDR" +$filesize;" \ + "cp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; " \ + "cmp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; " \ + "if test $? -ne 0; then " \ + "echo FDT PROGRAM FAILED; " \ + "else; " \ + "echo FDT PROGRAM SUCCEEDED; " \ + "fi; " \ + "else; " \ + "echo FDT DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "autoload=yes\0" \ + "download_cmd=tftp\0" \ + "console_args=console=ttyS0,115200\0" \ + "root_args=root=/dev/nfs rw\0" \ + "misc_args=ip=on\0" \ + "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \ + "bootfile=/home/user/file\0" \ + "osfile=/home/user/uImage-XPedite5370\0" \ + "fdtfile=/home/user/xpedite5370.dtb\0" \ + "ubootfile=/home/user/u-boot.bin\0" \ + "fdtaddr=c00000\0" \ + "osaddr=0x1000000\0" \ + "loadaddr=0x1000000\0" \ + "prog_uboot1="CONFIG_PROG_UBOOT1"\0" \ + "prog_uboot2="CONFIG_PROG_UBOOT2"\0" \ + "prog_os1="CONFIG_PROG_OS1"\0" \ + "prog_os2="CONFIG_PROG_OS2"\0" \ + "prog_fdt1="CONFIG_PROG_FDT1"\0" \ + "prog_fdt2="CONFIG_PROG_FDT2"\0" \ + "bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0" \ + "bootcmd_flash1=run set_bootargs; " \ + "bootm "CONFIG_OS1_ENV_ADDR" - "CONFIG_FDT1_ENV_ADDR"\0"\ + "bootcmd_flash2=run set_bootargs; " \ + "bootm "CONFIG_OS2_ENV_ADDR" - "CONFIG_FDT2_ENV_ADDR"\0"\ + "bootcmd=run bootcmd_flash1\0" +#endif /* __CONFIG_H */ diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h index 746f0ef102..c7e83ccfc1 100644 --- a/include/configs/at91rm9200dk.h +++ b/include/configs/at91rm9200dk.h @@ -45,33 +45,33 @@ #ifndef CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 /* flash */ -#define MC_PUIA_VAL 0x00000000 -#define MC_PUP_VAL 0x00000000 -#define MC_PUER_VAL 0x00000000 -#define MC_ASR_VAL 0x00000000 -#define MC_AASR_VAL 0x00000000 -#define EBI_CFGR_VAL 0x00000000 -#define SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ +#define CONFIG_SYS_MC_PUIA_VAL 0x00000000 +#define CONFIG_SYS_MC_PUP_VAL 0x00000000 +#define CONFIG_SYS_MC_PUER_VAL 0x00000000 +#define CONFIG_SYS_MC_ASR_VAL 0x00000000 +#define CONFIG_SYS_MC_AASR_VAL 0x00000000 +#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 +#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ /* clocks */ -#define PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */ -#define PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */ -#define MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */ +#define CONFIG_SYS_PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */ +#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */ +#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */ /* sdram */ -#define PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ -#define PIOC_BSR_VAL 0x00000000 -#define PIOC_PDR_VAL 0xFFFF0000 -#define EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */ -#define SDRC_CR_VAL 0x2188c155 /* set up the SDRAM */ -#define SDRAM 0x20000000 /* address of the SDRAM */ -#define SDRAM1 0x20000080 /* address of the SDRAM */ -#define SDRAM_VAL 0x00000000 /* value written to SDRAM */ -#define SDRC_MR_VAL 0x00000002 /* Precharge All */ -#define SDRC_MR_VAL1 0x00000004 /* refresh */ -#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ -#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */ -#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ +#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ +#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 +#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 +#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRC_CR_VAL 0x2188c155 /* set up the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ +#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ +#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ +#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ +#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ #else #define CONFIG_SKIP_RELOCATE_UBOOT #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h index cdd308d8b9..d9acb470fe 100644 --- a/include/configs/cmc_pu2.h +++ b/include/configs/cmc_pu2.h @@ -44,33 +44,33 @@ #ifndef CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 /* flash */ -#define MC_PUIA_VAL 0x00000000 -#define MC_PUP_VAL 0x00000000 -#define MC_PUER_VAL 0x00000000 -#define MC_ASR_VAL 0x00000000 -#define MC_AASR_VAL 0x00000000 -#define EBI_CFGR_VAL 0x00000000 -#define SMC_CSR0_VAL 0x100032ad /* 16bit, 2 TDF, 4 WS */ +#define CONFIG_SYS_MC_PUIA_VAL 0x00000000 +#define CONFIG_SYS_MC_PUP_VAL 0x00000000 +#define CONFIG_SYS_MC_PUER_VAL 0x00000000 +#define CONFIG_SYS_MC_ASR_VAL 0x00000000 +#define CONFIG_SYS_MC_AASR_VAL 0x00000000 +#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 +#define CONFIG_SYS_SMC_CSR0_VAL 0x100032ad /* 16bit, 2 TDF, 4 WS */ /* clocks */ -#define PLLAR_VAL 0x2026BE04 /* 179,712 MHz for PCK */ -#define PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */ -#define MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 69.120MHz from PLLA */ +#define CONFIG_SYS_PLLAR_VAL 0x2026BE04 /* 179,712 MHz for PCK */ +#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */ +#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 69.120MHz from PLLA */ /* sdram */ -#define PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ -#define PIOC_BSR_VAL 0x00000000 -#define PIOC_PDR_VAL 0xFFFF0000 -#define EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */ -#define SDRC_CR_VAL 0x3399c1d4 /* set up the SDRAM */ -#define SDRAM 0x20000000 /* address of the SDRAM */ -#define SDRAM1 0x20000080 /* address of the SDRAM */ -#define SDRAM_VAL 0x00000000 /* value written to SDRAM */ -#define SDRC_MR_VAL 0x00000002 /* Precharge All */ -#define SDRC_MR_VAL1 0x00000004 /* refresh */ -#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ -#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */ -#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ +#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ +#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 +#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 +#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRC_CR_VAL 0x3399c1d4 /* set up the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ +#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ +#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ +#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ +#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ #else #define CONFIG_SKIP_RELOCATE_UBOOT #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ diff --git a/include/configs/csb637.h b/include/configs/csb637.h index 682db447dd..2df77cfa7d 100644 --- a/include/configs/csb637.h +++ b/include/configs/csb637.h @@ -45,33 +45,33 @@ #ifndef CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 /* flash */ -#define MC_PUIA_VAL 0x00000000 -#define MC_PUP_VAL 0x00000000 -#define MC_PUER_VAL 0x00000000 -#define MC_ASR_VAL 0x00000000 -#define MC_AASR_VAL 0x00000000 -#define EBI_CFGR_VAL 0x00000000 -#define SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ +#define CONFIG_SYS_MC_PUIA_VAL 0x00000000 +#define CONFIG_SYS_MC_PUP_VAL 0x00000000 +#define CONFIG_SYS_MC_PUER_VAL 0x00000000 +#define CONFIG_SYS_MC_ASR_VAL 0x00000000 +#define CONFIG_SYS_MC_AASR_VAL 0x00000000 +#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 +#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ /* clocks */ -#define PLLAR_VAL 0x2031BE01 /* 184.320000 MHz for PCK */ -#define PLLBR_VAL 0x128A3E19 /* 47.996928 MHz (divider by 2 for USB) */ -#define MCKR_VAL 0x00000302 /* PCK/4 = MCK Master Clock = 46.080000 MHz from PLLA */ +#define CONFIG_SYS_PLLAR_VAL 0x2031BE01 /* 184.320000 MHz for PCK */ +#define CONFIG_SYS_PLLBR_VAL 0x128A3E19 /* 47.996928 MHz (divider by 2 for USB) */ +#define CONFIG_SYS_MCKR_VAL 0x00000302 /* PCK/4 = MCK Master Clock = 46.080000 MHz from PLLA */ /* sdram */ -#define PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ -#define PIOC_BSR_VAL 0x00000000 -#define PIOC_PDR_VAL 0xFFFF0000 -#define EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */ -#define SDRC_CR_VAL 0x21914159 /* set up the SDRAM */ -#define SDRAM 0x20000000 /* address of the SDRAM */ -#define SDRAM1 0x20000080 /* address of the SDRAM */ -#define SDRAM_VAL 0x00000000 /* value written to SDRAM */ -#define SDRC_MR_VAL 0x00000002 /* Precharge All */ -#define SDRC_MR_VAL1 0x00000004 /* refresh */ -#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ -#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */ -#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ +#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ +#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 +#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 +#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRC_CR_VAL 0x21914159 /* set up the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ +#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ +#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ +#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ +#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ #else #define CONFIG_SKIP_RELOCATE_UBOOT #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ diff --git a/include/configs/m501sk.h b/include/configs/m501sk.h index f09214dce9..eab37df22d 100644 --- a/include/configs/m501sk.h +++ b/include/configs/m501sk.h @@ -41,6 +41,39 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_MENUPROMPT "." +/* + * LowLevel Init + */ +#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 +/* flash */ +#define CONFIG_SYS_MC_PUIA_VAL 0x00000000 +#define CONFIG_SYS_MC_PUP_VAL 0x00000000 +#define CONFIG_SYS_MC_PUER_VAL 0x00000000 +#define CONFIG_SYS_MC_ASR_VAL 0x00000000 +#define CONFIG_SYS_MC_AASR_VAL 0x00000000 +#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 +#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ + +/* clocks */ +#define CONFIG_SYS_PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */ +#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */ +/* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */ +#define CONFIG_SYS_MCKR_VAL 0x00000202 + +/* sdram */ +#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ +#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 +#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 +#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRC_CR_VAL 0x2188c155 /* set up the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ +#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ +#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ +#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ +#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ /* * Size of malloc() pool diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h index cbbdb0c77e..fb10616c30 100644 --- a/include/configs/mp2usb.h +++ b/include/configs/mp2usb.h @@ -49,33 +49,33 @@ #ifndef CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 /* flash */ -#define MC_PUIA_VAL 0x00000000 -#define MC_PUP_VAL 0x00000000 -#define MC_PUER_VAL 0x00000000 -#define MC_ASR_VAL 0x00000000 -#define MC_AASR_VAL 0x00000000 -#define EBI_CFGR_VAL 0x00000000 -#define SMC_CSR0_VAL 0x00003084 /* 16bit, 2 TDF, 4 WS */ +#define CONFIG_SYS_MC_PUIA_VAL 0x00000000 +#define CONFIG_SYS_MC_PUP_VAL 0x00000000 +#define CONFIG_SYS_MC_PUER_VAL 0x00000000 +#define CONFIG_SYS_MC_ASR_VAL 0x00000000 +#define CONFIG_SYS_MC_AASR_VAL 0x00000000 +#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 +#define CONFIG_SYS_SMC_CSR0_VAL 0x00003084 /* 16bit, 2 TDF, 4 WS */ /* clocks */ -#define PLLAR_VAL 0x20263E04 /* 180 MHz for PCK */ -#define PLLBR_VAL 0x1048bE0E /* 48 MHz (divider by 2 for USB) */ -#define MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 60MHz from PLLA */ +#define CONFIG_SYS_PLLAR_VAL 0x20263E04 /* 180 MHz for PCK */ +#define CONFIG_SYS_PLLBR_VAL 0x1048bE0E /* 48 MHz (divider by 2 for USB) */ +#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 60MHz from PLLA */ /* sdram */ -#define PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ -#define PIOC_BSR_VAL 0x00000000 -#define PIOC_PDR_VAL 0xFFFF0000 -#define EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */ -#define SDRC_CR_VAL 0x3211295A /* set up the SDRAM */ -#define SDRAM 0x20000000 /* address of the SDRAM */ -#define SDRAM1 0x20000020 /* address of the SDRAM */ -#define SDRAM_VAL 0x00000000 /* value written to SDRAM */ -#define SDRC_MR_VAL 0x00000002 /* Precharge All */ -#define SDRC_MR_VAL1 0x00000004 /* refresh */ -#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ -#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */ -#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ +#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ +#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 +#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 +#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRC_CR_VAL 0x3211295A /* set up the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM1 0x20000020 /* address of the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ +#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ +#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ +#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ +#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ #else #define CONFIG_SKIP_RELOCATE_UBOOT #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h index f028d1ac63..844446205b 100644 --- a/include/configs/qemu-mips.h +++ b/include/configs/qemu-mips.h @@ -150,7 +150,7 @@ #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 #define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) /* Address and size of Primary Environment Sector */ #define CONFIG_ENV_SIZE 0x8000 diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h index 528c810900..8141a46dc0 100644 --- a/include/configs/sbc8548.h +++ b/include/configs/sbc8548.h @@ -399,25 +399,16 @@ #define CONFIG_TSEC1_NAME "eTSEC0" #define CONFIG_TSEC2 1 #define CONFIG_TSEC2_NAME "eTSEC1" -#define CONFIG_TSEC3 1 -#define CONFIG_TSEC3_NAME "eTSEC2" -#define CONFIG_TSEC4 -#define CONFIG_TSEC4_NAME "eTSEC3" #undef CONFIG_MPC85XX_FEC -#define TSEC1_PHY_ADDR 0 -#define TSEC2_PHY_ADDR 1 -#define TSEC3_PHY_ADDR 2 -#define TSEC4_PHY_ADDR 3 +#define TSEC1_PHY_ADDR 0x19 +#define TSEC2_PHY_ADDR 0x1a #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 -#define TSEC3_PHYIDX 0 -#define TSEC4_PHYIDX 0 + #define TSEC1_FLAGS TSEC_GIGABIT #define TSEC2_FLAGS TSEC_GIGABIT -#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) /* Options are: eTSEC[0-3] */ #define CONFIG_ETHPRIME "eTSEC0" @@ -464,6 +455,7 @@ /* * Miscellaneous configurable options */ +#define CONFIG_CMDLINE_EDITING /* undef to save memory */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ @@ -507,10 +499,6 @@ #define CONFIG_ETHADDR 02:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 02:E0:0C:00:01:FD -#define CONFIG_HAS_ETH2 -#define CONFIG_ETH2ADDR 02:E0:0C:00:02:FD -#define CONFIG_HAS_ETH3 -#define CONFIG_ETH3ADDR 02:E0:0C:00:03:FD #endif #define CONFIG_IPADDR 192.168.0.55 diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index 0012945758..1008812b71 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -311,18 +311,22 @@ * General PCI * Addresses are mapped 1-1. */ -#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 -#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE +#define CONFIG_SYS_PCI1_MEM_BUS 0x80000000 +#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BUS +#define CONFIG_SYS_PCI1_MEM_VIRT CONFIG_SYS_PCI1_MEM_BUS #define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCI1_IO_BASE 0xe2000000 -#define CONFIG_SYS_PCI1_IO_PHYS CONFIG_SYS_PCI1_IO_BASE +#define CONFIG_SYS_PCI1_IO_BUS 0xe2000000 +#define CONFIG_SYS_PCI1_IO_PHYS CONFIG_SYS_PCI1_IO_BUS +#define CONFIG_SYS_PCI1_IO_VIRT CONFIG_SYS_PCI1_IO_BUS #define CONFIG_SYS_PCI1_IO_SIZE 0x1000000 /* 16M */ -#define CONFIG_SYS_PCI2_MEM_BASE 0xa0000000 -#define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BASE +#define CONFIG_SYS_PCI2_MEM_BUS 0xa0000000 +#define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BUS +#define CONFIG_SYS_PCI2_MEM_VIRT CONFIG_SYS_PCI2_MEM_BUS #define CONFIG_SYS_PCI2_MEM_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI2_IO_BASE 0xe3000000 -#define CONFIG_SYS_PCI2_IO_PHYS CONFIG_SYS_PCI2_IO_BASE +#define CONFIG_SYS_PCI2_IO_BUS 0xe3000000 +#define CONFIG_SYS_PCI2_IO_PHYS CONFIG_SYS_PCI2_IO_BUS +#define CONFIG_SYS_PCI2_IO_VIRT CONFIG_SYS_PCI2_IO_BUS #define CONFIG_SYS_PCI2_IO_SIZE 0x1000000 /* 16M */ #if defined(CONFIG_PCI) @@ -409,10 +413,10 @@ * 0xa000_0000 512M PCI-Express 2 Memory * Changed it for operating from 0xd0000000 */ -#define CONFIG_SYS_DBAT1L ( CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_RW \ +#define CONFIG_SYS_DBAT1L ( CONFIG_SYS_PCI1_MEM_PHYS | BATL_PP_RW \ | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT1U (CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_DBAT1U (CONFIG_SYS_PCI1_MEM_VIRT | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) #define CONFIG_SYS_IBAT1U CONFIG_SYS_DBAT1U /* @@ -452,10 +456,10 @@ * 0xe300_0000 16M PCI-Express 2 I/0 * Note that this is at 0xe0000000 */ -#define CONFIG_SYS_DBAT4L ( CONFIG_SYS_PCI1_IO_BASE | BATL_PP_RW \ +#define CONFIG_SYS_DBAT4L ( CONFIG_SYS_PCI1_IO_PHYS | BATL_PP_RW \ | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT4U (CONFIG_SYS_PCI1_IO_BASE | BATU_BL_32M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI1_IO_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_DBAT4U (CONFIG_SYS_PCI1_IO_VIRT | BATU_BL_32M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) #define CONFIG_SYS_IBAT4U CONFIG_SYS_DBAT4U /* diff --git a/include/devices.h b/include/devices.h index 6b78d58889..20ddfc4342 100644 --- a/include/devices.h +++ b/include/devices.h @@ -91,7 +91,9 @@ extern char *stdio_names[MAX_FILES]; */ int device_register (device_t * dev); int devices_init (void); +#ifdef CONFIG_SYS_DEVICE_DEREGISTER int device_deregister(char *devname); +#endif struct list_head* device_get_list(void); device_t* device_get_by_name(char* name); device_t* device_clone(device_t *dev); diff --git a/include/e500.h b/include/e500.h index 1971eee291..9d3c8417c0 100644 --- a/include/e500.h +++ b/include/e500.h @@ -13,6 +13,7 @@ typedef struct unsigned long freqProcessor; unsigned long freqSystemBus; unsigned long freqDDRBus; + unsigned long freqLocalBus; } MPC85xx_SYS_INFO; #endif /* _ASMLANGUAGE */ diff --git a/include/mpc86xx.h b/include/mpc86xx.h index f119d5bb15..a6fdea352f 100644 --- a/include/mpc86xx.h +++ b/include/mpc86xx.h @@ -84,6 +84,7 @@ typedef struct { unsigned long freqProcessor; unsigned long freqSystemBus; + unsigned long freqLocalBus; } MPC86xx_SYS_INFO; #define l1icache_enable icache_enable diff --git a/include/pca953x.h b/include/pca953x.h new file mode 100644 index 0000000000..6c2b58c563 --- /dev/null +++ b/include/pca953x.h @@ -0,0 +1,39 @@ +/* + * Copyright 2008 Extreme Engineering Solutions, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __PCA953X_H_ +#define __PCA953X_H_ + +#define PCA953X_IN 0x00 +#define PCA953X_OUT 0x01 +#define PCA953X_POL 0x02 +#define PCA953X_CONF 0x03 + +#define PCA953X_OUT_LOW 0 +#define PCA953X_OUT_HIGH 1 +#define PCA953X_POL_NORMAL 0 +#define PCA953X_POL_INVERT 1 +#define PCA953X_DIR_OUT 0 +#define PCA953X_DIR_IN 1 + +int pca953x_set_val(u8 chip, uint mask, uint data); +int pca953x_set_pol(u8 chip, uint mask, uint data); +int pca953x_set_dir(u8 chip, uint mask, uint data); +int pca953x_get_val(u8 chip); + +#endif /* __PCA953X_H_ */ diff --git a/lib_blackfin/board.c b/lib_blackfin/board.c index fde4bbe0ff..05e66e3c55 100644 --- a/lib_blackfin/board.c +++ b/lib_blackfin/board.c @@ -374,13 +374,6 @@ void board_init_r(gd_t * id, ulong dest_addr) mem_malloc_init(); malloc_bin_reloc(); -#ifdef CONFIG_SPI -# if ! defined(CONFIG_ENV_IS_IN_EEPROM) - spi_init_f(); -# endif - spi_init_r(); -#endif - #ifdef CONFIG_CMD_NAND puts("NAND: "); nand_init(); /* go init the NAND */ diff --git a/lib_ppc/board.c b/lib_ppc/board.c index 289a32a644..61c29b563d 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -75,6 +75,10 @@ #include #endif +#ifdef CONFIG_ADDR_MAP +#include +#endif + #ifdef CONFIG_SYS_UPDATE_FLASH_SIZE extern int update_flash_size (int flash_size); #endif @@ -694,6 +698,10 @@ void board_init_r (gd_t *id, ulong dest_addr) */ trap_init (dest_addr); +#if defined(CONFIG_ADDR_MAP) && defined(CONFIG_E500) + init_addr_map(); +#endif + #if defined(CONFIG_BOARD_EARLY_INIT_R) board_early_init_r (); #endif diff --git a/lib_sh/time.c b/lib_sh/time.c index 2bd7715282..8fccce3d6a 100644 --- a/lib_sh/time.c +++ b/lib_sh/time.c @@ -49,21 +49,21 @@ int timer_init (void) { /* Divide clock by TMU_CLK_DIVIDER */ u16 bit = 0; - switch( TMU_CLK_DIVIDER ){ - case 4: - bit = 0; - break; - case 16: - bit = 1; - break; - case 64: bit = 2; + + switch (TMU_CLK_DIVIDER) { + case 1024: + bit = 4; break; case 256: bit = 3; break; - case 1024: - bit = 4; + case 64: + bit = 2; break; + case 16: + bit = 1; + break; + case 4: default: bit = 0; break; @@ -71,7 +71,7 @@ int timer_init (void) writew(readw(TCR0) | bit, TCR0); /* Clock adjustment calc */ - clk_adj = (int)(1.0/((1.0/CONFIG_SYS_HZ)*1000000)); + clk_adj = (int)(1.0 / ((1.0 / CONFIG_SYS_HZ) * 1000000)); if (clk_adj < 1) clk_adj = 1; @@ -102,8 +102,8 @@ void udelay (unsigned long usec) unsigned long get_timer (unsigned long base) { - /* return msec */ - return ((get_usec()/clk_adj)/1000) - base; + /* return msec */ + return ((get_usec() / clk_adj) / 1000) - base; } void set_timer (unsigned long t) diff --git a/lib_sh/time_sh2.c b/lib_sh/time_sh2.c index 4f893c87bd..5c6c9d4384 100644 --- a/lib_sh/time_sh2.c +++ b/lib_sh/time_sh2.c @@ -28,7 +28,7 @@ #include #include -#define CMT_CMCSR_INIT 0x0001 /* PCLK/32 */ +#define CMT_CMCSR_INIT 0x0001 /* PCLK/32 */ #define CMT_CMCSR_CALIB 0x0000 #define CMT_MAX_COUNTER (0xFFFFFFFF) #define CMT_TIMER_RESET (0xFFFF) @@ -87,7 +87,7 @@ static unsigned long get_usec (void) /* return msec */ ulong get_timer(ulong base) { - return (get_usec()/1000) - base; + return (get_usec() / 1000) - base; } void set_timer(ulong t) diff --git a/tools/ncb.c b/tools/ncb.c index 74deebb652..7e123f163d 100644 --- a/tools/ncb.c +++ b/tools/ncb.c @@ -8,7 +8,7 @@ int main (int argc, char *argv[]) int s, len, o, port = 6666; char buf[512]; struct sockaddr_in addr; - int addr_len = sizeof addr; + socklen_t addr_len = sizeof addr; if (argc > 1) port = atoi (argv[1]);