From: Benoît Thébaudeau Date: Fri, 3 May 2013 10:32:27 +0000 (+0000) Subject: imx: mx51evk: Convert to iomux-v3 X-Git-Tag: v2013.07-rc1~85^2~21 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=4d15d36c0800179a33695a7a38433fa13085e11f;p=u-boot imx: mx51evk: Convert to iomux-v3 There is no change of behavior, except for older silicon revisions for which support is removed. Signed-off-by: Benoît Thébaudeau --- diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c index 54c16b1f9d..369da6de5b 100644 --- a/board/freescale/mx51evk/mx51evk.c +++ b/board/freescale/mx51evk/mx51evk.c @@ -24,8 +24,7 @@ #include #include #include -#include -#include +#include #include #include #include @@ -64,160 +63,103 @@ u32 get_board_rev(void) return rev; } +#define UART_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_DSE_HIGH) + static void setup_iomux_uart(void) { - unsigned int pad = PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE | - PAD_CTL_PUE_PULL | PAD_CTL_DRV_HIGH; - - mxc_request_iomux(MX51_PIN_UART1_RXD, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_UART1_RXD, pad | PAD_CTL_SRE_FAST); - mxc_request_iomux(MX51_PIN_UART1_TXD, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_UART1_TXD, pad | PAD_CTL_SRE_FAST); - mxc_request_iomux(MX51_PIN_UART1_RTS, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_UART1_RTS, pad); - mxc_request_iomux(MX51_PIN_UART1_CTS, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_UART1_CTS, pad); + static const iomux_v3_cfg_t uart_pads[] = { + MX51_PAD_UART1_RXD__UART1_RXD, + MX51_PAD_UART1_TXD__UART1_TXD, + NEW_PAD_CTRL(MX51_PAD_UART1_RTS__UART1_RTS, UART_PAD_CTRL), + NEW_PAD_CTRL(MX51_PAD_UART1_CTS__UART1_CTS, UART_PAD_CTRL), + }; + + imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); } static void setup_iomux_fec(void) { - /*FEC_MDIO*/ - mxc_request_iomux(MX51_PIN_EIM_EB2 , IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX51_PIN_EIM_EB2 , 0x1FD); - - /*FEC_MDC*/ - mxc_request_iomux(MX51_PIN_NANDF_CS3, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_NANDF_CS3, 0x2004); - - /* FEC RDATA[3] */ - mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX51_PIN_EIM_CS3, 0x180); - - /* FEC RDATA[2] */ - mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX51_PIN_EIM_CS2, 0x180); - - /* FEC RDATA[1] */ - mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX51_PIN_EIM_EB3, 0x180); - - /* FEC RDATA[0] */ - mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_NANDF_D9, 0x2180); - - /* FEC TDATA[3] */ - mxc_request_iomux(MX51_PIN_NANDF_CS6, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_NANDF_CS6, 0x2004); - - /* FEC TDATA[2] */ - mxc_request_iomux(MX51_PIN_NANDF_CS5, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_NANDF_CS5, 0x2004); - - /* FEC TDATA[1] */ - mxc_request_iomux(MX51_PIN_NANDF_CS4, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_NANDF_CS4, 0x2004); - - /* FEC TDATA[0] */ - mxc_request_iomux(MX51_PIN_NANDF_D8, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_NANDF_D8, 0x2004); - - /* FEC TX_EN */ - mxc_request_iomux(MX51_PIN_NANDF_CS7, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_CS7, 0x2004); - - /* FEC TX_ER */ - mxc_request_iomux(MX51_PIN_NANDF_CS2, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_NANDF_CS2, 0x2004); - - /* FEC TX_CLK */ - mxc_request_iomux(MX51_PIN_NANDF_RDY_INT, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_RDY_INT, 0x2180); - - /* FEC TX_COL */ - mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_RB2, 0x2180); - - /* FEC RX_CLK */ - mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, 0x2180); - - /* FEC RX_CRS */ - mxc_request_iomux(MX51_PIN_EIM_CS5, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX51_PIN_EIM_CS5, 0x180); - - /* FEC RX_ER */ - mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX51_PIN_EIM_CS4, 0x180); - - /* FEC RX_DV */ - mxc_request_iomux(MX51_PIN_NANDF_D11, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_NANDF_D11, 0x2180); + static const iomux_v3_cfg_t fec_pads[] = { + NEW_PAD_CTRL(MX51_PAD_EIM_EB2__FEC_MDIO, PAD_CTL_HYS | + PAD_CTL_PUS_22K_UP | PAD_CTL_ODE | + PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST), + MX51_PAD_NANDF_CS3__FEC_MDC, + NEW_PAD_CTRL(MX51_PAD_EIM_CS3__FEC_RDATA3, MX51_PAD_CTRL_2), + NEW_PAD_CTRL(MX51_PAD_EIM_CS2__FEC_RDATA2, MX51_PAD_CTRL_2), + NEW_PAD_CTRL(MX51_PAD_EIM_EB3__FEC_RDATA1, MX51_PAD_CTRL_2), + MX51_PAD_NANDF_D9__FEC_RDATA0, + MX51_PAD_NANDF_CS6__FEC_TDATA3, + MX51_PAD_NANDF_CS5__FEC_TDATA2, + MX51_PAD_NANDF_CS4__FEC_TDATA1, + MX51_PAD_NANDF_D8__FEC_TDATA0, + MX51_PAD_NANDF_CS7__FEC_TX_EN, + MX51_PAD_NANDF_CS2__FEC_TX_ER, + MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK, + NEW_PAD_CTRL(MX51_PAD_NANDF_RB2__FEC_COL, MX51_PAD_CTRL_4), + NEW_PAD_CTRL(MX51_PAD_NANDF_RB3__FEC_RX_CLK, MX51_PAD_CTRL_4), + MX51_PAD_EIM_CS5__FEC_CRS, + MX51_PAD_EIM_CS4__FEC_RX_ER, + NEW_PAD_CTRL(MX51_PAD_NANDF_D11__FEC_RX_DV, MX51_PAD_CTRL_4), + }; + + imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads)); } #ifdef CONFIG_MXC_SPI static void setup_iomux_spi(void) { - /* 000: Select mux mode: ALT0 mux port: MOSI of instance: ecspi1 */ - mxc_request_iomux(MX51_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_CSPI1_MOSI, 0x105); - - /* 000: Select mux mode: ALT0 mux port: MISO of instance: ecspi1. */ - mxc_request_iomux(MX51_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_CSPI1_MISO, 0x105); - - /* de-select SS1 of instance: ecspi1. */ - mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX51_PIN_CSPI1_SS1, 0x85); - - /* 000: Select mux mode: ALT0 mux port: SS0 ecspi1 */ - mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_CSPI1_SS0, 0x185); - - /* 000: Select mux mode: ALT0 mux port: RDY of instance: ecspi1. */ - mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY, 0x180); - - /* 000: Select mux mode: ALT0 mux port: SCLK of instance: ecspi1. */ - mxc_request_iomux(MX51_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_CSPI1_SCLK, 0x105); + static const iomux_v3_cfg_t spi_pads[] = { + NEW_PAD_CTRL(MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI, PAD_CTL_HYS | + PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_CSPI1_MISO__ECSPI1_MISO, PAD_CTL_HYS | + PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_CSPI1_SS1__ECSPI1_SS1, + MX51_GPIO_PAD_CTRL), + MX51_PAD_CSPI1_SS0__ECSPI1_SS0, + NEW_PAD_CTRL(MX51_PAD_CSPI1_RDY__ECSPI1_RDY, MX51_PAD_CTRL_2), + NEW_PAD_CTRL(MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, PAD_CTL_HYS | + PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST), + }; + + imx_iomux_v3_setup_multiple_pads(spi_pads, ARRAY_SIZE(spi_pads)); } #endif #ifdef CONFIG_USB_EHCI_MX5 -#define MX51EVK_USBH1_HUB_RST IOMUX_TO_GPIO(MX51_PIN_GPIO1_7) /* GPIO1_7 */ -#define MX51EVK_USBH1_STP IOMUX_TO_GPIO(MX51_PIN_USBH1_STP) /* GPIO1_27 */ -#define MX51EVK_USB_CLK_EN_B IOMUX_TO_GPIO(MX51_PIN_EIM_D18) /* GPIO2_1 */ -#define MX51EVK_USB_PHY_RESET IOMUX_TO_GPIO(MX51_PIN_EIM_D21) /* GPIO2_5 */ - -#define USBH1_PAD (PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH | \ - PAD_CTL_100K_PU | PAD_CTL_PUE_PULL | \ - PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE) -#define GPIO_PAD (PAD_CTL_DRV_HIGH | PAD_CTL_PKE_ENABLE | \ - PAD_CTL_SRE_FAST) -#define NO_PAD (1 << 16) +#define MX51EVK_USBH1_HUB_RST IMX_GPIO_NR(1, 7) +#define MX51EVK_USBH1_STP IMX_GPIO_NR(1, 27) +#define MX51EVK_USB_CLK_EN_B IMX_GPIO_NR(2, 2) +#define MX51EVK_USB_PHY_RESET IMX_GPIO_NR(2, 5) static void setup_usb_h1(void) { - setup_iomux_usb_h1(); - - /* GPIO_1_7 for USBH1 hub reset */ - mxc_request_iomux(MX51_PIN_GPIO1_7, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_GPIO1_7, NO_PAD); - - /* GPIO_2_1 */ - mxc_request_iomux(MX51_PIN_EIM_D17, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_EIM_D17, GPIO_PAD); - - /* GPIO_2_5 for USB PHY reset */ - mxc_request_iomux(MX51_PIN_EIM_D21, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_EIM_D21, GPIO_PAD); + static const iomux_v3_cfg_t usb_h1_pads[] = { + MX51_PAD_USBH1_CLK__USBH1_CLK, + MX51_PAD_USBH1_DIR__USBH1_DIR, + MX51_PAD_USBH1_STP__USBH1_STP, + MX51_PAD_USBH1_NXT__USBH1_NXT, + MX51_PAD_USBH1_DATA0__USBH1_DATA0, + MX51_PAD_USBH1_DATA1__USBH1_DATA1, + MX51_PAD_USBH1_DATA2__USBH1_DATA2, + MX51_PAD_USBH1_DATA3__USBH1_DATA3, + MX51_PAD_USBH1_DATA4__USBH1_DATA4, + MX51_PAD_USBH1_DATA5__USBH1_DATA5, + MX51_PAD_USBH1_DATA6__USBH1_DATA6, + MX51_PAD_USBH1_DATA7__USBH1_DATA7, + + NEW_PAD_CTRL(MX51_PAD_GPIO1_7__GPIO1_7, 0), /* H1 hub reset */ + MX51_PAD_EIM_D17__GPIO2_1, + MX51_PAD_EIM_D21__GPIO2_5, /* PHY reset */ + }; + + imx_iomux_v3_setup_multiple_pads(usb_h1_pads, ARRAY_SIZE(usb_h1_pads)); } int board_ehci_hcd_init(int port) { /* Set USBH1_STP to GPIO and toggle it */ - mxc_request_iomux(MX51_PIN_USBH1_STP, IOMUX_CONFIG_GPIO); - mxc_iomux_set_pad(MX51_PIN_USBH1_STP, USBH1_PAD); + imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_USBH1_STP__GPIO1_27, + MX51_USBH_PAD_CTRL)); gpio_direction_output(MX51EVK_USBH1_STP, 0); gpio_direction_output(MX51EVK_USB_PHY_RESET, 0); @@ -225,8 +167,7 @@ int board_ehci_hcd_init(int port) gpio_set_value(MX51EVK_USBH1_STP, 1); /* Set back USBH1_STP to be function */ - mxc_request_iomux(MX51_PIN_USBH1_STP, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_USBH1_STP, USBH1_PAD); + imx_iomux_v3_setup_pad(MX51_PAD_USBH1_STP__USBH1_STP); /* De-assert USB PHY RESETB */ gpio_set_value(MX51EVK_USB_PHY_RESET, 1); @@ -328,7 +269,8 @@ static void power_init(void) VVIDEOEN | VAUDIOEN | VSDEN; pmic_reg_write(p, REG_MODE_1, val); - mxc_request_iomux(MX51_PIN_EIM_A20, IOMUX_CONFIG_ALT1); + imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_EIM_A20__GPIO2_14, + NO_PAD_CTRL)); gpio_direction_output(IMX_GPIO_NR(2, 14), 0); udelay(500); @@ -342,9 +284,11 @@ int board_mmc_getcd(struct mmc *mmc) struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; int ret; - mxc_request_iomux(MX51_PIN_GPIO1_0, IOMUX_CONFIG_ALT1); + imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_GPIO1_0__GPIO1_0, + NO_PAD_CTRL)); gpio_direction_input(IMX_GPIO_NR(1, 0)); - mxc_request_iomux(MX51_PIN_GPIO1_6, IOMUX_CONFIG_ALT0); + imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_GPIO1_6__GPIO1_6, + NO_PAD_CTRL)); gpio_direction_input(IMX_GPIO_NR(1, 6)); if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) @@ -357,6 +301,40 @@ int board_mmc_getcd(struct mmc *mmc) int board_mmc_init(bd_t *bis) { + static const iomux_v3_cfg_t sd1_pads[] = { + NEW_PAD_CTRL(MX51_PAD_SD1_CMD__SD1_CMD, PAD_CTL_DSE_MAX | + PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_SD1_CLK__SD1_CLK, PAD_CTL_DSE_MAX | + PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_SD1_DATA0__SD1_DATA0, PAD_CTL_DSE_MAX | + PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_SD1_DATA1__SD1_DATA1, PAD_CTL_DSE_MAX | + PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_SD1_DATA2__SD1_DATA2, PAD_CTL_DSE_MAX | + PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_SD1_DATA3__SD1_DATA3, PAD_CTL_DSE_MAX | + PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_GPIO1_0__SD1_CD, PAD_CTL_HYS), + NEW_PAD_CTRL(MX51_PAD_GPIO1_1__SD1_WP, PAD_CTL_HYS), + }; + + static const iomux_v3_cfg_t sd2_pads[] = { + NEW_PAD_CTRL(MX51_PAD_SD2_CMD__SD2_CMD, + PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_SD2_CLK__SD2_CLK, + PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_SD2_DATA0__SD2_DATA0, + PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_SD2_DATA1__SD2_DATA1, + PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_SD2_DATA2__SD2_DATA2, + PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_SD2_DATA3__SD2_DATA3, + PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_GPIO1_6__GPIO1_6, PAD_CTL_HYS), + NEW_PAD_CTRL(MX51_PAD_GPIO1_5__GPIO1_5, PAD_CTL_HYS), + }; + u32 index; s32 status = 0; @@ -367,98 +345,12 @@ int board_mmc_init(bd_t *bis) index++) { switch (index) { case 0: - mxc_request_iomux(MX51_PIN_SD1_CMD, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX51_PIN_SD1_CLK, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX51_PIN_SD1_DATA0, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX51_PIN_SD1_DATA1, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX51_PIN_SD1_DATA2, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX51_PIN_SD1_DATA3, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(MX51_PIN_SD1_CMD, - PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | - PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD1_CLK, - PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | - PAD_CTL_HYS_NONE | PAD_CTL_47K_PU | - PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA0, - PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | - PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA1, - PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | - PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA2, - PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | - PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA3, - PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | - PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PD | - PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); - mxc_request_iomux(MX51_PIN_GPIO1_0, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(MX51_PIN_GPIO1_0, - PAD_CTL_HYS_ENABLE); - mxc_request_iomux(MX51_PIN_GPIO1_1, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(MX51_PIN_GPIO1_1, - PAD_CTL_HYS_ENABLE); + imx_iomux_v3_setup_multiple_pads(sd1_pads, + ARRAY_SIZE(sd1_pads)); break; case 1: - mxc_request_iomux(MX51_PIN_SD2_CMD, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX51_PIN_SD2_CLK, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX51_PIN_SD2_DATA0, - IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX51_PIN_SD2_DATA1, - IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX51_PIN_SD2_DATA2, - IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX51_PIN_SD2_DATA3, - IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_SD2_CMD, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | - PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD2_CLK, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | - PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD2_DATA0, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | - PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD2_DATA1, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | - PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD2_DATA2, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | - PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD2_DATA3, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | - PAD_CTL_SRE_FAST); - mxc_request_iomux(MX51_PIN_SD2_CMD, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX51_PIN_GPIO1_6, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(MX51_PIN_GPIO1_6, - PAD_CTL_HYS_ENABLE); - mxc_request_iomux(MX51_PIN_GPIO1_5, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(MX51_PIN_GPIO1_5, - PAD_CTL_HYS_ENABLE); + imx_iomux_v3_setup_multiple_pads(sd2_pads, + ARRAY_SIZE(sd2_pads)); break; default: printf("Warning: you configured more ESDHC controller" diff --git a/board/freescale/mx51evk/mx51evk_video.c b/board/freescale/mx51evk/mx51evk_video.c index 7be5c9befc..556cb38ca6 100644 --- a/board/freescale/mx51evk/mx51evk_video.c +++ b/board/freescale/mx51evk/mx51evk_video.c @@ -24,7 +24,7 @@ #include #include #include -#include +#include #include #include @@ -67,25 +67,25 @@ static struct fb_videomode const dvi = { void setup_iomux_lcd(void) { /* DI2_PIN15 */ - mxc_request_iomux(MX51_PIN_DI_GP4, IOMUX_CONFIG_ALT4); + imx_iomux_v3_setup_pad(MX51_PAD_DI_GP4__DI2_PIN15); - /* Pad settings for MX51_PIN_DI2_DISP_CLK */ - mxc_iomux_set_pad(MX51_PIN_DI2_DISP_CLK, PAD_CTL_HYS_NONE | - PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | - PAD_CTL_DRV_MAX | PAD_CTL_SRE_SLOW); + /* Pad settings for DI2_DISP_CLK */ + imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK, + PAD_CTL_PKE | PAD_CTL_DSE_MAX | PAD_CTL_SRE_SLOW)); /* Turn on 3.3V voltage for LCD */ - mxc_request_iomux(MX51_PIN_CSI2_D12, IOMUX_CONFIG_ALT3); + imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_CSI2_D12__GPIO4_9, + NO_PAD_CTRL)); gpio_direction_output(MX51EVK_LCD_3V3, 1); /* Turn on 5V voltage for LCD */ - mxc_request_iomux(MX51_PIN_CSI2_D13, IOMUX_CONFIG_ALT3); + imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_CSI2_D13__GPIO4_10, + NO_PAD_CTRL)); gpio_direction_output(MX51EVK_LCD_5V, 1); /* Turn on GPIO backlight */ - mxc_request_iomux(MX51_PIN_DI1_D1_CS, IOMUX_CONFIG_ALT4); - mxc_iomux_set_input(MX51_GPIO3_IPP_IND_G_IN_4_SELECT_INPUT, - INPUT_CTL_PATH1); + imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_DI1_D1_CS__GPIO3_4, + NO_PAD_CTRL)); gpio_direction_output(MX51EVK_LCD_BACKLIGHT, 1); }