From: Jocelyn Bohr Date: Sun, 2 Apr 2017 08:24:33 +0000 (-0700) Subject: mmc: bcm2835_sdhci: Speed up mmc writes. X-Git-Tag: v2017.05-rc2~7^2~1 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=4db2b61fcf206cb45753cd1f988a9b0aad92b561;p=u-boot mmc: bcm2835_sdhci: Speed up mmc writes. The linux kernel driver for this module does not use a delay when writing to the SDHCI_BUFFER register. This patch mimics that behavior in order to speed up the mmc writes on the Raspberry Pi. Signed-off-by: Alex Deymo Reviewed-by: Simon Glass --- diff --git a/drivers/mmc/bcm2835_sdhci.c b/drivers/mmc/bcm2835_sdhci.c index 29c2a85812..20079bce48 100644 --- a/drivers/mmc/bcm2835_sdhci.c +++ b/drivers/mmc/bcm2835_sdhci.c @@ -44,6 +44,7 @@ /* 400KHz is max freq for card ID etc. Use that as min */ #define MIN_FREQ 400000 +#define SDHCI_BUFFER 0x20 struct bcm2835_sdhci_host { struct sdhci_host host; @@ -69,8 +70,11 @@ static inline void bcm2835_sdhci_raw_writel(struct sdhci_host *host, u32 val, * (Which is just as well - otherwise we'd have to nobble the DMA engine * too) */ - while (timer_get_us() - bcm_host->last_write < bcm_host->twoticks_delay) - ; + if (reg != SDHCI_BUFFER) { + while (timer_get_us() - bcm_host->last_write < + bcm_host->twoticks_delay) + ; + } writel(val, host->ioaddr + reg); bcm_host->last_write = timer_get_us();