From: Michal Simek Date: Thu, 6 Oct 2011 20:35:35 +0000 (+0000) Subject: net: axi_ethernet: Add driver to u-boot X-Git-Tag: v2011.12-rc1~521 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=4f1ec4c176810bbc60e7142336b2bd74eac3bec1;p=u-boot net: axi_ethernet: Add driver to u-boot Add axi_ethernet driver for little-endian Microblaze. RX/TX BDs and rxframe buffer are shared among all axi_ethernet MACs. Only one MAC can work in one time. Signed-off-by: Michal Simek Acked-by: Mike Frysinger --- diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 3f845d6237..3f4f9749dd 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -78,6 +78,7 @@ COBJS-$(CONFIG_FMAN_ENET) += fsl_mdio.o COBJS-$(CONFIG_TSI108_ETH) += tsi108_eth.o COBJS-$(CONFIG_ULI526X) += uli526x.o COBJS-$(CONFIG_VSC7385_ENET) += vsc7385.o +COBJS-$(CONFIG_XILINX_AXIEMAC) += xilinx_axi_emac.o COBJS-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o COBJS := $(sort $(COBJS-y)) diff --git a/drivers/net/xilinx_axi_emac.c b/drivers/net/xilinx_axi_emac.c new file mode 100644 index 0000000000..82e254b529 --- /dev/null +++ b/drivers/net/xilinx_axi_emac.c @@ -0,0 +1,664 @@ +/* + * Copyright (C) 2011 Michal Simek + * Copyright (C) 2011 PetaLogix + * Copyright (C) 2010 Xilinx, Inc. All rights reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#if !defined(CONFIG_PHYLIB) +# error AXI_ETHERNET requires PHYLIB +#endif + +/* Link setup */ +#define XAE_EMMC_LINKSPEED_MASK 0xC0000000 /* Link speed */ +#define XAE_EMMC_LINKSPD_10 0x00000000 /* Link Speed mask for 10 Mbit */ +#define XAE_EMMC_LINKSPD_100 0x40000000 /* Link Speed mask for 100 Mbit */ +#define XAE_EMMC_LINKSPD_1000 0x80000000 /* Link Speed mask for 1000 Mbit */ + +/* Interrupt Status/Enable/Mask Registers bit definitions */ +#define XAE_INT_RXRJECT_MASK 0x00000008 /* Rx frame rejected */ +#define XAE_INT_MGTRDY_MASK 0x00000080 /* MGT clock Lock */ + +/* Receive Configuration Word 1 (RCW1) Register bit definitions */ +#define XAE_RCW1_RX_MASK 0x10000000 /* Receiver enable */ + +/* Transmitter Configuration (TC) Register bit definitions */ +#define XAE_TC_TX_MASK 0x10000000 /* Transmitter enable */ + +#define XAE_UAW1_UNICASTADDR_MASK 0x0000FFFF + +/* MDIO Management Configuration (MC) Register bit definitions */ +#define XAE_MDIO_MC_MDIOEN_MASK 0x00000040 /* MII management enable*/ + +/* MDIO Management Control Register (MCR) Register bit definitions */ +#define XAE_MDIO_MCR_PHYAD_MASK 0x1F000000 /* Phy Address Mask */ +#define XAE_MDIO_MCR_PHYAD_SHIFT 24 /* Phy Address Shift */ +#define XAE_MDIO_MCR_REGAD_MASK 0x001F0000 /* Reg Address Mask */ +#define XAE_MDIO_MCR_REGAD_SHIFT 16 /* Reg Address Shift */ +#define XAE_MDIO_MCR_OP_READ_MASK 0x00008000 /* Op Code Read Mask */ +#define XAE_MDIO_MCR_OP_WRITE_MASK 0x00004000 /* Op Code Write Mask */ +#define XAE_MDIO_MCR_INITIATE_MASK 0x00000800 /* Ready Mask */ +#define XAE_MDIO_MCR_READY_MASK 0x00000080 /* Ready Mask */ + +#define XAE_MDIO_DIV_DFT 29 /* Default MDIO clock divisor */ + +/* DMA macros */ +/* Bitmasks of XAXIDMA_CR_OFFSET register */ +#define XAXIDMA_CR_RUNSTOP_MASK 0x00000001 /* Start/stop DMA channel */ +#define XAXIDMA_CR_RESET_MASK 0x00000004 /* Reset DMA engine */ + +/* Bitmasks of XAXIDMA_SR_OFFSET register */ +#define XAXIDMA_HALTED_MASK 0x00000001 /* DMA channel halted */ + +/* Bitmask for interrupts */ +#define XAXIDMA_IRQ_IOC_MASK 0x00001000 /* Completion intr */ +#define XAXIDMA_IRQ_DELAY_MASK 0x00002000 /* Delay interrupt */ +#define XAXIDMA_IRQ_ALL_MASK 0x00007000 /* All interrupts */ + +/* Bitmasks of XAXIDMA_BD_CTRL_OFFSET register */ +#define XAXIDMA_BD_CTRL_TXSOF_MASK 0x08000000 /* First tx packet */ +#define XAXIDMA_BD_CTRL_TXEOF_MASK 0x04000000 /* Last tx packet */ + +#define DMAALIGN 128 + +static u8 rxframe[PKTSIZE_ALIGN] __attribute((aligned(DMAALIGN))); + +/* Reflect dma offsets */ +struct axidma_reg { + u32 control; /* DMACR */ + u32 status; /* DMASR */ + u32 current; /* CURDESC */ + u32 reserved; + u32 tail; /* TAILDESC */ +}; + +/* Private driver structures */ +struct axidma_priv { + struct axidma_reg *dmatx; + struct axidma_reg *dmarx; + int phyaddr; + + struct phy_device *phydev; + struct mii_dev *bus; +}; + +/* BD descriptors */ +struct axidma_bd { + u32 next; /* Next descriptor pointer */ + u32 reserved1; + u32 phys; /* Buffer address */ + u32 reserved2; + u32 reserved3; + u32 reserved4; + u32 cntrl; /* Control */ + u32 status; /* Status */ + u32 app0; + u32 app1; /* TX start << 16 | insert */ + u32 app2; /* TX csum seed */ + u32 app3; + u32 app4; + u32 sw_id_offset; + u32 reserved5; + u32 reserved6; +}; + +/* Static BDs - driver uses only one BD */ +static struct axidma_bd tx_bd __attribute((aligned(DMAALIGN))); +static struct axidma_bd rx_bd __attribute((aligned(DMAALIGN))); + +struct axi_regs { + u32 reserved[3]; + u32 is; /* 0xC: Interrupt status */ + u32 reserved2; + u32 ie; /* 0x14: Interrupt enable */ + u32 reserved3[251]; + u32 rcw1; /* 0x404: Rx Configuration Word 1 */ + u32 tc; /* 0x408: Tx Configuration */ + u32 reserved4; + u32 emmc; /* 0x410: EMAC mode configuration */ + u32 reserved5[59]; + u32 mdio_mc; /* 0x500: MII Management Config */ + u32 mdio_mcr; /* 0x504: MII Management Control */ + u32 mdio_mwd; /* 0x508: MII Management Write Data */ + u32 mdio_mrd; /* 0x50C: MII Management Read Data */ + u32 reserved6[124]; + u32 uaw0; /* 0x700: Unicast address word 0 */ + u32 uaw1; /* 0x704: Unicast address word 1 */ +}; + +/* Use MII register 1 (MII status register) to detect PHY */ +#define PHY_DETECT_REG 1 + +/* + * Mask used to verify certain PHY features (or register contents) + * in the register above: + * 0x1000: 10Mbps full duplex support + * 0x0800: 10Mbps half duplex support + * 0x0008: Auto-negotiation support + */ +#define PHY_DETECT_MASK 0x1808 + +static inline int mdio_wait(struct eth_device *dev) +{ + struct axi_regs *regs = (struct axi_regs *)dev->iobase; + u32 timeout = 200; + + /* Wait till MDIO interface is ready to accept a new transaction. */ + while (timeout && (!(in_be32(®s->mdio_mcr) + & XAE_MDIO_MCR_READY_MASK))) { + timeout--; + udelay(1); + } + if (!timeout) { + printf("%s: Timeout\n", __func__); + return 1; + } + return 0; +} + +static u32 phyread(struct eth_device *dev, u32 phyaddress, u32 registernum, + u16 *val) +{ + struct axi_regs *regs = (struct axi_regs *)dev->iobase; + u32 mdioctrlreg = 0; + + if (mdio_wait(dev)) + return 1; + + mdioctrlreg = ((phyaddress << XAE_MDIO_MCR_PHYAD_SHIFT) & + XAE_MDIO_MCR_PHYAD_MASK) | + ((registernum << XAE_MDIO_MCR_REGAD_SHIFT) + & XAE_MDIO_MCR_REGAD_MASK) | + XAE_MDIO_MCR_INITIATE_MASK | + XAE_MDIO_MCR_OP_READ_MASK; + + out_be32(®s->mdio_mcr, mdioctrlreg); + + if (mdio_wait(dev)) + return 1; + + /* Read data */ + *val = in_be32(®s->mdio_mrd); + return 0; +} + +static u32 phywrite(struct eth_device *dev, u32 phyaddress, u32 registernum, + u32 data) +{ + struct axi_regs *regs = (struct axi_regs *)dev->iobase; + u32 mdioctrlreg = 0; + + if (mdio_wait(dev)) + return 1; + + mdioctrlreg = ((phyaddress << XAE_MDIO_MCR_PHYAD_SHIFT) & + XAE_MDIO_MCR_PHYAD_MASK) | + ((registernum << XAE_MDIO_MCR_REGAD_SHIFT) + & XAE_MDIO_MCR_REGAD_MASK) | + XAE_MDIO_MCR_INITIATE_MASK | + XAE_MDIO_MCR_OP_WRITE_MASK; + + /* Write data */ + out_be32(®s->mdio_mwd, data); + + out_be32(®s->mdio_mcr, mdioctrlreg); + + if (mdio_wait(dev)) + return 1; + + return 0; +} + +/* Setting axi emac and phy to proper setting */ +static int setup_phy(struct eth_device *dev) +{ + u16 phyreg; + u32 i, speed, emmc_reg, ret; + struct axidma_priv *priv = dev->priv; + struct axi_regs *regs = (struct axi_regs *)dev->iobase; + struct phy_device *phydev; + + u32 supported = SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full; + + if (priv->phyaddr == -1) { + /* Detect the PHY address */ + for (i = 31; i >= 0; i--) { + ret = phyread(dev, i, PHY_DETECT_REG, &phyreg); + if (!ret && (phyreg != 0xFFFF) && + ((phyreg & PHY_DETECT_MASK) == PHY_DETECT_MASK)) { + /* Found a valid PHY address */ + priv->phyaddr = i; + debug("axiemac: Found valid phy address, %x\n", + phyreg); + break; + } + } + } + + /* Interface - look at tsec */ + phydev = phy_connect(priv->bus, priv->phyaddr, dev, 0); + + phydev->supported &= supported; + phydev->advertising = phydev->supported; + priv->phydev = phydev; + phy_config(phydev); + phy_startup(phydev); + + switch (phydev->speed) { + case 1000: + speed = XAE_EMMC_LINKSPD_1000; + break; + case 100: + speed = XAE_EMMC_LINKSPD_100; + break; + case 10: + speed = XAE_EMMC_LINKSPD_10; + break; + default: + return 0; + } + + /* Setup the emac for the phy speed */ + emmc_reg = in_be32(®s->emmc); + emmc_reg &= ~XAE_EMMC_LINKSPEED_MASK; + emmc_reg |= speed; + + /* Write new speed setting out to Axi Ethernet */ + out_be32(®s->emmc, emmc_reg); + + /* + * Setting the operating speed of the MAC needs a delay. There + * doesn't seem to be register to poll, so please consider this + * during your application design. + */ + udelay(1); + + return 1; +} + +/* STOP DMA transfers */ +static void axiemac_halt(struct eth_device *dev) +{ + struct axidma_priv *priv = dev->priv; + u32 temp; + + /* Stop the hardware */ + temp = in_be32(&priv->dmatx->control); + temp &= ~XAXIDMA_CR_RUNSTOP_MASK; + out_be32(&priv->dmatx->control, temp); + + temp = in_be32(&priv->dmarx->control); + temp &= ~XAXIDMA_CR_RUNSTOP_MASK; + out_be32(&priv->dmarx->control, temp); + + debug("axiemac: Halted\n"); +} + +static int axi_ethernet_init(struct eth_device *dev) +{ + struct axi_regs *regs = (struct axi_regs *)dev->iobase; + u32 timeout = 200; + + /* + * Check the status of the MgtRdy bit in the interrupt status + * registers. This must be done to allow the MGT clock to become stable + * for the Sgmii and 1000BaseX PHY interfaces. No other register reads + * will be valid until this bit is valid. + * The bit is always a 1 for all other PHY interfaces. + */ + while (timeout && (!(in_be32(®s->is) & XAE_INT_MGTRDY_MASK))) { + timeout--; + udelay(1); + } + if (!timeout) { + printf("%s: Timeout\n", __func__); + return 1; + } + + /* Stop the device and reset HW */ + /* Disable interrupts */ + out_be32(®s->ie, 0); + + /* Disable the receiver */ + out_be32(®s->rcw1, in_be32(®s->rcw1) & ~XAE_RCW1_RX_MASK); + + /* + * Stopping the receiver in mid-packet causes a dropped packet + * indication from HW. Clear it. + */ + /* Set the interrupt status register to clear the interrupt */ + out_be32(®s->is, XAE_INT_RXRJECT_MASK); + + /* Setup HW */ + /* Set default MDIO divisor */ + out_be32(®s->mdio_mc, XAE_MDIO_DIV_DFT | XAE_MDIO_MC_MDIOEN_MASK); + + debug("axiemac: InitHw done\n"); + return 0; +} + +static int axiemac_setup_mac(struct eth_device *dev) +{ + struct axi_regs *regs = (struct axi_regs *)dev->iobase; + + /* Set the MAC address */ + int val = ((dev->enetaddr[3] << 24) | (dev->enetaddr[2] << 16) | + (dev->enetaddr[1] << 8) | (dev->enetaddr[0])); + out_be32(®s->uaw0, val); + + val = (dev->enetaddr[5] << 8) | dev->enetaddr[4] ; + val |= in_be32(®s->uaw1) & ~XAE_UAW1_UNICASTADDR_MASK; + out_be32(®s->uaw1, val); + return 0; +} + +/* Reset DMA engine */ +static void axi_dma_init(struct eth_device *dev) +{ + struct axidma_priv *priv = dev->priv; + u32 timeout = 500; + + /* Reset the engine so the hardware starts from a known state */ + out_be32(&priv->dmatx->control, XAXIDMA_CR_RESET_MASK); + out_be32(&priv->dmarx->control, XAXIDMA_CR_RESET_MASK); + + /* At the initialization time, hardware should finish reset quickly */ + while (timeout--) { + /* Check transmit/receive channel */ + /* Reset is done when the reset bit is low */ + if (!(in_be32(&priv->dmatx->control) | + in_be32(&priv->dmarx->control)) + & XAXIDMA_CR_RESET_MASK) { + break; + } + } + if (!timeout) + printf("%s: Timeout\n", __func__); +} + +static int axiemac_init(struct eth_device *dev, bd_t * bis) +{ + struct axidma_priv *priv = dev->priv; + struct axi_regs *regs = (struct axi_regs *)dev->iobase; + u32 temp; + + debug("axiemac: Init started\n"); + /* + * Initialize AXIDMA engine. AXIDMA engine must be initialized before + * AxiEthernet. During AXIDMA engine initialization, AXIDMA hardware is + * reset, and since AXIDMA reset line is connected to AxiEthernet, this + * would ensure a reset of AxiEthernet. + */ + axi_dma_init(dev); + + /* Initialize AxiEthernet hardware. */ + if (axi_ethernet_init(dev)) + return -1; + + /* Disable all RX interrupts before RxBD space setup */ + temp = in_be32(&priv->dmarx->control); + temp &= ~XAXIDMA_IRQ_ALL_MASK; + out_be32(&priv->dmarx->control, temp); + + /* Start DMA RX channel. Now it's ready to receive data.*/ + out_be32(&priv->dmarx->current, (u32)&rx_bd); + + /* Setup the BD. */ + memset(&rx_bd, 0, sizeof(rx_bd)); + rx_bd.next = (u32)&rx_bd; + rx_bd.phys = (u32)&rxframe; + rx_bd.cntrl = sizeof(rxframe); + /* Flush the last BD so DMA core could see the updates */ + flush_cache((u32)&rx_bd, sizeof(rx_bd)); + + /* It is necessary to flush rxframe because if you don't do it + * then cache can contain uninitialized data */ + flush_cache((u32)&rxframe, sizeof(rxframe)); + + /* Start the hardware */ + temp = in_be32(&priv->dmarx->control); + temp |= XAXIDMA_CR_RUNSTOP_MASK; + out_be32(&priv->dmarx->control, temp); + + /* Rx BD is ready - start */ + out_be32(&priv->dmarx->tail, (u32)&rx_bd); + + /* Enable TX */ + out_be32(®s->tc, XAE_TC_TX_MASK); + /* Enable RX */ + out_be32(®s->rcw1, XAE_RCW1_RX_MASK); + + /* PHY setup */ + if (!setup_phy(dev)) { + axiemac_halt(dev); + return -1; + } + + debug("axiemac: Init complete\n"); + return 0; +} + +static int axiemac_send(struct eth_device *dev, volatile void *ptr, int len) +{ + struct axidma_priv *priv = dev->priv; + u32 timeout; + + if (len > PKTSIZE_ALIGN) + len = PKTSIZE_ALIGN; + + /* Flush packet to main memory to be trasfered by DMA */ + flush_cache((u32)ptr, len); + + /* Setup Tx BD */ + memset(&tx_bd, 0, sizeof(tx_bd)); + /* At the end of the ring, link the last BD back to the top */ + tx_bd.next = (u32)&tx_bd; + tx_bd.phys = (u32)ptr; + /* Save len */ + tx_bd.cntrl = len | XAXIDMA_BD_CTRL_TXSOF_MASK | + XAXIDMA_BD_CTRL_TXEOF_MASK; + + /* Flush the last BD so DMA core could see the updates */ + flush_cache((u32)&tx_bd, sizeof(tx_bd)); + + if (in_be32(&priv->dmatx->status) & XAXIDMA_HALTED_MASK) { + u32 temp; + out_be32(&priv->dmatx->current, (u32)&tx_bd); + /* Start the hardware */ + temp = in_be32(&priv->dmatx->control); + temp |= XAXIDMA_CR_RUNSTOP_MASK; + out_be32(&priv->dmatx->control, temp); + } + + /* Start transfer */ + out_be32(&priv->dmatx->tail, (u32)&tx_bd); + + /* Wait for transmission to complete */ + debug("axiemac: Waiting for tx to be done\n"); + timeout = 200; + while (timeout && (!in_be32(&priv->dmatx->status) & + (XAXIDMA_IRQ_DELAY_MASK | XAXIDMA_IRQ_IOC_MASK))) { + timeout--; + udelay(1); + } + if (!timeout) { + printf("%s: Timeout\n", __func__); + return 1; + } + + debug("axiemac: Sending complete\n"); + return 0; +} + +static int isrxready(struct eth_device *dev) +{ + u32 status; + struct axidma_priv *priv = dev->priv; + + /* Read pending interrupts */ + status = in_be32(&priv->dmarx->status); + + /* Acknowledge pending interrupts */ + out_be32(&priv->dmarx->status, status & XAXIDMA_IRQ_ALL_MASK); + + /* + * If Reception done interrupt is asserted, call RX call back function + * to handle the processed BDs and then raise the according flag. + */ + if ((status & (XAXIDMA_IRQ_DELAY_MASK | XAXIDMA_IRQ_IOC_MASK))) + return 1; + + return 0; +} + +static int axiemac_recv(struct eth_device *dev) +{ + u32 length; + struct axidma_priv *priv = dev->priv; + u32 temp; + + /* Wait for an incoming packet */ + if (!isrxready(dev)) + return 0; + + debug("axiemac: RX data ready\n"); + + /* Disable IRQ for a moment till packet is handled */ + temp = in_be32(&priv->dmarx->control); + temp &= ~XAXIDMA_IRQ_ALL_MASK; + out_be32(&priv->dmarx->control, temp); + + length = rx_bd.app4 & 0xFFFF; /* max length mask */ +#ifdef DEBUG + print_buffer(&rxframe, &rxframe[0], 1, length, 16); +#endif + /* Pass the received frame up for processing */ + if (length) + NetReceive(rxframe, length); + +#ifdef DEBUG + /* It is useful to clear buffer to be sure that it is consistent */ + memset(rxframe, 0, sizeof(rxframe)); +#endif + /* Setup RxBD */ + /* Clear the whole buffer and setup it again - all flags are cleared */ + memset(&rx_bd, 0, sizeof(rx_bd)); + rx_bd.next = (u32)&rx_bd; + rx_bd.phys = (u32)&rxframe; + rx_bd.cntrl = sizeof(rxframe); + + /* Write bd to HW */ + flush_cache((u32)&rx_bd, sizeof(rx_bd)); + + /* It is necessary to flush rxframe because if you don't do it + * then cache will contain previous packet */ + flush_cache((u32)&rxframe, sizeof(rxframe)); + + /* Rx BD is ready - start again */ + out_be32(&priv->dmarx->tail, (u32)&rx_bd); + + debug("axiemac: RX completed, framelength = %d\n", length); + + return length; +} + +static int axiemac_miiphy_read(const char *devname, uchar addr, + uchar reg, ushort *val) +{ + struct eth_device *dev = eth_get_dev(); + u32 ret; + + ret = phyread(dev, addr, reg, val); + debug("axiemac: Read MII 0x%x, 0x%x, 0x%x\n", addr, reg, *val); + return ret; +} + +static int axiemac_miiphy_write(const char *devname, uchar addr, + uchar reg, ushort val) +{ + struct eth_device *dev = eth_get_dev(); + + debug("axiemac: Write MII 0x%x, 0x%x, 0x%x\n", addr, reg, val); + return phywrite(dev, addr, reg, val); +} + +static int axiemac_bus_reset(struct mii_dev *bus) +{ + debug("axiemac: Bus reset\n"); + return 0; +} + +int xilinx_axiemac_initialize(bd_t *bis, unsigned long base_addr, + unsigned long dma_addr) +{ + struct eth_device *dev; + struct axidma_priv *priv; + + dev = calloc(1, sizeof(struct eth_device)); + if (dev == NULL) + return -1; + + dev->priv = calloc(1, sizeof(struct axidma_priv)); + if (dev->priv == NULL) { + free(dev); + return -1; + } + priv = dev->priv; + + sprintf(dev->name, "aximac.%lx", base_addr); + + dev->iobase = base_addr; + priv->dmatx = (struct axidma_reg *)dma_addr; + /* RX channel offset is 0x30 */ + priv->dmarx = (struct axidma_reg *)(dma_addr + 0x30); + dev->init = axiemac_init; + dev->halt = axiemac_halt; + dev->send = axiemac_send; + dev->recv = axiemac_recv; + dev->write_hwaddr = axiemac_setup_mac; + +#ifdef CONFIG_PHY_ADDR + priv->phyaddr = CONFIG_PHY_ADDR; +#else + priv->phyaddr = -1; +#endif + + eth_register(dev); + +#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) || defined(CONFIG_PHYLIB) + miiphy_register(dev->name, axiemac_miiphy_read, axiemac_miiphy_write); + priv->bus = miiphy_get_dev_by_name(dev->name); + priv->bus->reset = axiemac_bus_reset; +#endif + return 1; +} diff --git a/include/netdev.h b/include/netdev.h index 480453e51d..669f60b7e4 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -95,6 +95,8 @@ int tsi108_eth_initialize(bd_t *bis); int uec_standard_init(bd_t *bis); int uli526x_initialize(bd_t *bis); int armada100_fec_register(unsigned long base_addr); +int xilinx_axiemac_initialize(bd_t *bis, unsigned long base_addr, + unsigned long dma_addr); int xilinx_emaclite_initialize (bd_t *bis, int base_addr); /* Boards with PCI network controllers can call this from their board_eth_init()