From: richardbarry Date: Thu, 8 Dec 2011 13:16:34 +0000 (+0000) Subject: Remove all printf() statements from Kinetis demo as they prevent the code running... X-Git-Tag: V7.1.0~7 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=519d1fb64ff60e492a1f2665c712e44be8f1f6e7;p=freertos Remove all printf() statements from Kinetis demo as they prevent the code running when the debugger is not attached. git-svn-id: https://svn.code.sf.net/p/freertos/code/trunk@1653 1d2547de-c912-0410-9cb9-b8ca96c0e9e2 --- diff --git a/Demo/CORTEX_Kinetis_K60_Tower_IAR/Freescale_Code/cpu/arm_cm4.c b/Demo/CORTEX_Kinetis_K60_Tower_IAR/Freescale_Code/cpu/arm_cm4.c index 0e253bcb4..cda275572 100644 --- a/Demo/CORTEX_Kinetis_K60_Tower_IAR/Freescale_Code/cpu/arm_cm4.c +++ b/Demo/CORTEX_Kinetis_K60_Tower_IAR/Freescale_Code/cpu/arm_cm4.c @@ -78,12 +78,6 @@ void enable_irq (int irq) { int div; - /* Make sure that the IRQ is an allowable number. Right now up to 91 is - * used. - */ - if (irq > 91) - printf("\nERR! Invalid IRQ value passed to enable irq function!\n"); - /* Determine which of the NVICISERs corresponds to the irq */ div = irq/32; @@ -119,12 +113,6 @@ void disable_irq (int irq) { int div; - /* Make sure that the IRQ is an allowable number. Right now up to 91 is - * used. - */ - if (irq > 91) - printf("\nERR! Invalid IRQ value passed to disable irq function!\n"); - /* Determine which of the NVICICERs corresponds to the irq */ div = irq/32; @@ -159,15 +147,6 @@ void set_irq_priority (int irq, int prio) /*irq priority pointer*/ uint8 *prio_reg; - /* Make sure that the IRQ is an allowable number. Right now up to 91 is - * used. - */ - if (irq > 91) - printf("\nERR! Invalid IRQ value passed to priority irq function!\n"); - - if (prio > 15) - printf("\nERR! Invalid priority value passed to priority irq function!\n"); - /* Determine which of the NVICIPx corresponds to the irq */ prio_reg = (uint8 *)(((uint32)&NVICIP0) + irq); /* Assign priority to IRQ */ diff --git a/Demo/CORTEX_Kinetis_K60_Tower_IAR/Freescale_Code/cpu/start.c b/Demo/CORTEX_Kinetis_K60_Tower_IAR/Freescale_Code/cpu/start.c index d39070b40..830c1e70b 100644 --- a/Demo/CORTEX_Kinetis_K60_Tower_IAR/Freescale_Code/cpu/start.c +++ b/Demo/CORTEX_Kinetis_K60_Tower_IAR/Freescale_Code/cpu/start.c @@ -29,33 +29,9 @@ void start(void) /* Perform processor initialization */ sysinit(); - printf("\n\n"); - - /* Determine the last cause(s) of reset */ - if (MC_SRSH & MC_SRSH_SW_MASK) - printf("Software Reset\n"); - if (MC_SRSH & MC_SRSH_LOCKUP_MASK) - printf("Core Lockup Event Reset\n"); - if (MC_SRSH & MC_SRSH_JTAG_MASK) - printf("JTAG Reset\n"); - - if (MC_SRSL & MC_SRSL_POR_MASK) - printf("Power-on Reset\n"); - if (MC_SRSL & MC_SRSL_PIN_MASK) - printf("External Pin Reset\n"); - if (MC_SRSL & MC_SRSL_COP_MASK) - printf("Watchdog(COP) Reset\n"); - if (MC_SRSL & MC_SRSL_LOC_MASK) - printf("Loss of Clock Reset\n"); - if (MC_SRSL & MC_SRSL_LVD_MASK) - printf("Low-voltage Detect Reset\n"); - if (MC_SRSL & MC_SRSL_WAKEUP_MASK) - printf("LLWU Reset\n"); - + /* Determine the flash revision */ + flash_identify(); - /* Determine specific Kinetis device and revision */ - cpu_identify(); - /* Jump to main process */ main(); @@ -63,168 +39,6 @@ void start(void) while(1); } /********************************************************************/ -/*! - * \brief Kinetis Identify - * \return None - * - * This is primarly a reporting function that displays information - * about the specific CPU to the default terminal including: - * - Kinetis family - * - package - * - die revision - * - P-flash size - * - Ram size - */ -void cpu_identify (void) -{ - /* Determine the Kinetis family */ - switch((SIM_SDID & SIM_SDID_FAMID(0x7))>>SIM_SDID_FAMID_SHIFT) - { - case 0x0: - printf("\nK10-"); - break; - case 0x1: - printf("\nK20-"); - break; - case 0x2: - printf("\nK30-"); - break; - case 0x3: - printf("\nK40-"); - break; - case 0x4: - printf("\nK60-"); - break; - case 0x5: - printf("\nK70-"); - break; - case 0x6: - printf("\nK50-"); - break; - case 0x7: - printf("\nK53-"); - break; - default: - printf("\nUnrecognized Kinetis family device.\n"); - break; - } - - /* Determine the package size */ - switch((SIM_SDID & SIM_SDID_PINID(0xF))>>SIM_SDID_PINID_SHIFT) - { - case 0x2: - printf("32pin "); - break; - case 0x4: - printf("48pin "); - break; - case 0x5: - printf("64pin "); - break; - case 0x6: - printf("80pin "); - break; - case 0x7: - printf("81pin "); - break; - case 0x8: - printf("100pin "); - break; - case 0x9: - printf("104pin "); - break; - case 0xA: - printf("144pin "); - break; - case 0xC: - printf("196pin "); - break; - case 0xE: - printf("256pin "); - break; - default: - printf("\nUnrecognized Kinetis package code. "); - break; - } - - /* Determine the revision ID */ - printf("Silicon rev %d \n", (SIM_SDID & SIM_SDID_REVID(0xF))>>SIM_SDID_REVID_SHIFT); - - - /* Determine the flash revision */ - flash_identify(); - - /* Determine the P-flash size */ - switch((SIM_FCFG1 & SIM_FCFG1_FSIZE(0xFF))>>SIM_FCFG1_FSIZE_SHIFT) - { - case 0x0: - printf("12 kBytes of P-flash "); - break; - case 0x1: - printf("16 kBytes of P-flash "); - break; - case 0x2: - printf("32 kBytes of P-flash "); - break; - case 0x3: - printf("48 kBytes of P-flash "); - break; - case 0x4: - printf("64 kBytes of P-flash "); - break; - case 0x5: - printf("96 kBytes of P-flash "); - break; - case 0x6: - printf("128 kBytes of P-flash "); - break; - case 0x7: - printf("192 kBytes of P-flash "); - break; - case 0x8: - printf("256 kBytes of P-flash "); - break; - case 0x9: - printf("320 kBytes of P-flash "); - break; - case 0xA: - printf("384 kBytes of P-flash "); - break; - case 0xB: - printf("448 kBytes of P-flash "); - break; - case 0xC: - printf("512 kBytes of P-flash "); - break; - case 0xFF: - printf("Full size P-flash "); - break; - default: - printf("ERR!! Undefined P-flash size\n"); - break; - } - - /* Determine the RAM size */ - switch((SIM_SOPT1 & SIM_SOPT1_RAMSIZE(0xF))>>SIM_SOPT1_RAMSIZE_SHIFT) - { - case 0x5: - printf(" 32 kBytes of RAM\n\n"); - break; - case 0x7: - printf(" 64 kBytes of RAM\n\n"); - break; - case 0x8: - printf(" 96 kBytes of RAM\n\n"); - break; - case 0x9: - printf(" 128 kBytes of RAM\n\n"); - break; - default: - printf(" ERR!! Undefined RAM size\n\n"); - break; - } -} -/********************************************************************/ /*! * \brief flash Identify * \return None @@ -253,8 +67,6 @@ void flash_identify (void) /* Wait for the command to complete */ while(!(FTFL_FSTAT & FTFL_FSTAT_CCIF_MASK)); - printf("Flash parameter version %d.%d.%d.%d\n",FTFL_FCCOB4,FTFL_FCCOB5,FTFL_FCCOB6,FTFL_FCCOB7); - /* Get the flash version ID */ /* Write the flash FCCOB registers with the values for a read resource command */ @@ -269,8 +81,6 @@ void flash_identify (void) /* Wait for the command to complete */ while(!(FTFL_FSTAT & FTFL_FSTAT_CCIF_MASK)); - - printf("Flash version ID %d.%d.%d.%d\n",FTFL_FCCOB4,FTFL_FCCOB5,FTFL_FCCOB6,FTFL_FCCOB7); } /********************************************************************/ diff --git a/Demo/CORTEX_Kinetis_K60_Tower_IAR/Freescale_Code/cpu/vectors.c b/Demo/CORTEX_Kinetis_K60_Tower_IAR/Freescale_Code/cpu/vectors.c index 8ce424162..2312305df 100644 --- a/Demo/CORTEX_Kinetis_K60_Tower_IAR/Freescale_Code/cpu/vectors.c +++ b/Demo/CORTEX_Kinetis_K60_Tower_IAR/Freescale_Code/cpu/vectors.c @@ -300,10 +300,7 @@ typedef void (*vector_entry)(void); void default_isr(void) { - #define VECTORNUM (*(volatile uint8_t*)(0xE000ED04)) - - printf("\n****default_isr entered on vector %d*****\r\n\n",VECTORNUM); - return; + for( ;; ); } /******************************************************************************/ /* End of "vectors.c" */ diff --git a/Demo/CORTEX_Kinetis_K60_Tower_IAR/Freescale_Code/drivers/enet/eth_phy.c b/Demo/CORTEX_Kinetis_K60_Tower_IAR/Freescale_Code/drivers/enet/eth_phy.c index 6183f50ee..87e6db87c 100644 --- a/Demo/CORTEX_Kinetis_K60_Tower_IAR/Freescale_Code/drivers/enet/eth_phy.c +++ b/Demo/CORTEX_Kinetis_K60_Tower_IAR/Freescale_Code/drivers/enet/eth_phy.c @@ -397,17 +397,10 @@ eth_phy_reg_dump(int ch, int phy_addr) { int j, settings; - printf("\n MII Register Block\n"); - printf("--------------------------------"); for (j = 0; j < 32; j++) { mii_read(ch, phy_addr, j, &settings); - if (!(j % 4)) - printf("\n0x%02X-0x%02X : %04X ", j, j + 3, settings); - else - printf("%04X ", settings); } - printf("\n"); return 0; } diff --git a/Demo/CORTEX_Kinetis_K60_Tower_IAR/main-full.c b/Demo/CORTEX_Kinetis_K60_Tower_IAR/main-full.c index a8b60fa3e..c401d0ce1 100644 --- a/Demo/CORTEX_Kinetis_K60_Tower_IAR/main-full.c +++ b/Demo/CORTEX_Kinetis_K60_Tower_IAR/main-full.c @@ -389,7 +389,6 @@ static long lChangedTimerPeriodAlready = pdFALSE; if( lChangedTimerPeriodAlready == pdFALSE ) { lChangedTimerPeriodAlready = pdTRUE; - printf( "%s", pcStatusMessage ); /* This call to xTimerChangePeriod() uses a zero block time. Functions called from inside of a timer callback function must @@ -561,7 +560,6 @@ volatile size_t xFreeHeapSpace; xTimerStart( xLED2Timer, portMAX_DELAY ); xFreeHeapSpace = xPortGetFreeHeapSize(); - printf( "%d bytes of FreeRTOS heap remain unused\nconfigTOTAL_HEAP_SIZE can be reduced\n", xFreeHeapSpace ); if( xFreeHeapSpace > 100 ) {