From: Uwe Bonnes Date: Sun, 22 May 2016 14:51:34 +0000 (+0200) Subject: stm32l4: Handle failing flash_size read like on other devices. X-Git-Tag: v0.10.0-rc1~128 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=51f039bd0cfd9e5942c3670d6b0526bf32be695a;p=openocd stm32l4: Handle failing flash_size read like on other devices. Change-Id: I54d7cd3a8c80d0e4663c3c09457a4ff338a6f1a0 Signed-off-by: Uwe Bonnes Reviewed-on: http://openocd.zylin.com/3503 Reviewed-by: Andreas Fritiofson Tested-by: jenkins --- diff --git a/src/flash/nor/stm32l4x.c b/src/flash/nor/stm32l4x.c index 4e5f925b..129b281e 100644 --- a/src/flash/nor/stm32l4x.c +++ b/src/flash/nor/stm32l4x.c @@ -599,6 +599,7 @@ static int stm32l4_probe(struct flash_bank *bank) struct stm32l4_flash_bank *stm32l4_info = bank->driver_priv; int i; uint16_t flash_size_in_kb = 0xffff; + uint16_t max_flash_size_in_kb; uint32_t device_id; uint32_t options; uint32_t base_address = 0x08000000; @@ -614,6 +615,7 @@ static int stm32l4_probe(struct flash_bank *bank) /* set max flash size depending on family */ switch (device_id & 0xfff) { case 0x415: + max_flash_size_in_kb = 1024; break; default: LOG_WARNING("Cannot identify target as a STM32L4 family."); @@ -623,6 +625,19 @@ static int stm32l4_probe(struct flash_bank *bank) /* get flash size from target. */ retval = target_read_u16(target, FLASH_SIZE_REG, &flash_size_in_kb); + /* failed reading flash size or flash size invalid (early silicon), + * default to max target family */ + if (retval != ERROR_OK || flash_size_in_kb == 0xffff || flash_size_in_kb == 0) { + LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming %dk flash", + max_flash_size_in_kb); + flash_size_in_kb = max_flash_size_in_kb; + } + + LOG_INFO("flash size = %dkbytes", flash_size_in_kb); + + /* did we assign flash size? */ + assert(flash_size_in_kb != 0xffff); + /* get options to for DUAL BANK. */ retval = target_read_u32(target, STM32_FLASH_OPTR, &options); @@ -632,8 +647,6 @@ static int stm32l4_probe(struct flash_bank *bank) else stm32l4_info->option_bytes.bank_b_start = flash_size_in_kb << 9; - LOG_INFO("flash size = %dkbytes", flash_size_in_kb); - /* did we assign flash size? */ assert((flash_size_in_kb != 0xffff) && flash_size_in_kb);