From: Ash Charles Date: Wed, 28 Sep 2011 06:47:16 +0000 (+0000) Subject: omap: TWL4030 Bump VMMC1 interface voltage from 3V to 3.15V X-Git-Tag: v2011.12-rc1~29^2~2 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=528cdcaacee55eb6c2910637e19541ee2c327487;p=u-boot omap: TWL4030 Bump VMMC1 interface voltage from 3V to 3.15V MMC interfaces are specified to be 3.3V compatible with an operating voltage range of 3.1V to 3.5V for SD cards. This change affects hardware using TWL4030 (TPS6595x) PMICs and should improve the reliability when communicating with marginally-spec'd MMC devices. 3.15V is the highest possible level for this chip. This patch has been tested on a Gumstix Overo board. Signed-off-by: Ash Charles Tested-by: Steve Sakoman --- diff --git a/drivers/power/twl4030.c b/drivers/power/twl4030.c index 5a7323a715..4a4ddeb91f 100644 --- a/drivers/power/twl4030.c +++ b/drivers/power/twl4030.c @@ -97,9 +97,9 @@ void twl4030_power_init(void) void twl4030_power_mmc_init(void) { - /* Set VMMC1 to 3 Volts */ + /* Set VMMC1 to 3.15 Volts */ twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC1_DEDICATED, - TWL4030_PM_RECEIVER_VMMC1_VSEL_30, + TWL4030_PM_RECEIVER_VMMC1_VSEL_32, TWL4030_PM_RECEIVER_VMMC1_DEV_GRP, TWL4030_PM_RECEIVER_DEV_GRP_P1); } diff --git a/include/twl4030.h b/include/twl4030.h index 930c285c26..9cd32ab45a 100644 --- a/include/twl4030.h +++ b/include/twl4030.h @@ -310,6 +310,7 @@ #define TWL4030_PM_RECEIVER_VPLL2_VSEL_18 0x05 #define TWL4030_PM_RECEIVER_VDAC_VSEL_18 0x03 #define TWL4030_PM_RECEIVER_VMMC1_VSEL_30 0x02 +#define TWL4030_PM_RECEIVER_VMMC1_VSEL_32 0x03 /* Device Selection in PM Receiver Module */ #define TWL4030_PM_RECEIVER_DEV_GRP_P1 0x20