From: Simon Glass Date: Mon, 3 Aug 2015 14:19:31 +0000 (-0600) Subject: exynos: Drop old exynos5250-specific board code X-Git-Tag: v2015.10-rc2~394^2~28 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=54abb000e3d76ab7c2d0df11a2b4074aec7f3c1f;p=u-boot exynos: Drop old exynos5250-specific board code Now that most exynos5250 boards can use the generic exynos5 code, switch over to it and remove the old code. Signed-off-by: Simon Glass --- diff --git a/board/samsung/smdk5250/Makefile b/board/samsung/smdk5250/Makefile index 3d96b077b4..501cab69e1 100644 --- a/board/samsung/smdk5250/Makefile +++ b/board/samsung/smdk5250/Makefile @@ -5,7 +5,3 @@ # obj-y += smdk5250_spl.o - -ifndef CONFIG_SPL_BUILD -obj-y += exynos5-dt.o -endif diff --git a/board/samsung/smdk5250/exynos5-dt.c b/board/samsung/smdk5250/exynos5-dt.c deleted file mode 100644 index 53ff7061d7..0000000000 --- a/board/samsung/smdk5250/exynos5-dt.c +++ /dev/null @@ -1,306 +0,0 @@ -/* - * Copyright (C) 2012 Samsung Electronics - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_SOUND_MAX98095 -static void board_enable_audio_codec(void) -{ - /* Enable MAX98095 Codec */ - gpio_request(EXYNOS5_GPIO_X17, "max98095_enable"); - gpio_direction_output(EXYNOS5_GPIO_X17, 1); - gpio_set_pull(EXYNOS5_GPIO_X17, S5P_GPIO_PULL_NONE); -} -#endif - -int exynos_init(void) -{ -#ifdef CONFIG_SOUND_MAX98095 - board_enable_audio_codec(); -#endif - return 0; -} - -#if defined(CONFIG_POWER) -#ifdef CONFIG_POWER_MAX77686 -static int pmic_reg_update(struct pmic *p, int reg, uint regval) -{ - u32 val; - int ret = 0; - - ret = pmic_reg_read(p, reg, &val); - if (ret) { - debug("%s: PMIC %d register read failed\n", __func__, reg); - return -1; - } - val |= regval; - ret = pmic_reg_write(p, reg, val); - if (ret) { - debug("%s: PMIC %d register write failed\n", __func__, reg); - return -1; - } - return 0; -} - -static int max77686_init(void) -{ - struct pmic *p; - - if (pmic_init(I2C_PMIC)) - return -1; - - p = pmic_get("MAX77686_PMIC"); - if (!p) - return -ENODEV; - - if (pmic_probe(p)) - return -1; - - if (pmic_reg_update(p, MAX77686_REG_PMIC_32KHZ, MAX77686_32KHCP_EN)) - return -1; - - if (pmic_reg_update(p, MAX77686_REG_PMIC_BBAT, - MAX77686_BBCHOSTEN | MAX77686_BBCVS_3_5V)) - return -1; - - /* VDD_MIF */ - if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK1OUT, - MAX77686_BUCK1OUT_1V)) { - debug("%s: PMIC %d register write failed\n", __func__, - MAX77686_REG_PMIC_BUCK1OUT); - return -1; - } - - if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK1CRTL, - MAX77686_BUCK1CTRL_EN)) - return -1; - - /* VDD_ARM */ - if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK2DVS1, - MAX77686_BUCK2DVS1_1_3V)) { - debug("%s: PMIC %d register write failed\n", __func__, - MAX77686_REG_PMIC_BUCK2DVS1); - return -1; - } - - if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK2CTRL1, - MAX77686_BUCK2CTRL_ON)) - return -1; - - /* VDD_INT */ - if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK3DVS1, - MAX77686_BUCK3DVS1_1_0125V)) { - debug("%s: PMIC %d register write failed\n", __func__, - MAX77686_REG_PMIC_BUCK3DVS1); - return -1; - } - - if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK3CTRL, - MAX77686_BUCK3CTRL_ON)) - return -1; - - /* VDD_G3D */ - if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK4DVS1, - MAX77686_BUCK4DVS1_1_2V)) { - debug("%s: PMIC %d register write failed\n", __func__, - MAX77686_REG_PMIC_BUCK4DVS1); - return -1; - } - - if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK4CTRL1, - MAX77686_BUCK3CTRL_ON)) - return -1; - - /* VDD_LDO2 */ - if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO2CTRL1, - MAX77686_LD02CTRL1_1_5V | EN_LDO)) - return -1; - - /* VDD_LDO3 */ - if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO3CTRL1, - MAX77686_LD03CTRL1_1_8V | EN_LDO)) - return -1; - - /* VDD_LDO5 */ - if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO5CTRL1, - MAX77686_LD05CTRL1_1_8V | EN_LDO)) - return -1; - - /* VDD_LDO10 */ - if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO10CTRL1, - MAX77686_LD10CTRL1_1_8V | EN_LDO)) - return -1; - - return 0; -} -#endif /* CONFIG_POWER_MAX77686 */ - -int exynos_power_init(void) -{ - int ret = 0; - -#ifdef CONFIG_POWER_MAX77686 - ret = max77686_init(); - if (ret) - return ret; -#endif -#ifdef CONFIG_POWER_TPS65090 - /* - * The TPS65090 may not be in the device tree. If so, it is not - * an error. - */ - ret = tps65090_init(); - if (ret == 0 || ret == -ENODEV) - return 0; -#endif - - return ret; -} -#endif /* CONFIG_POWER */ - -#ifdef CONFIG_LCD -static int board_dp_bridge_setup(void) -{ - const int max_tries = 10; - int num_tries, node; - - /* - * TODO(sjg): Use device tree for GPIOs when exynos GPIO - * numbering patch is in mainline. - */ - debug("%s\n", __func__); - node = fdtdec_next_compatible(gd->fdt_blob, 0, COMPAT_NXP_PTN3460); - if (node < 0) { - debug("%s: No node for DP bridge in device tree\n", __func__); - return -ENODEV; - } - - /* Setup the GPIOs */ - - /* PD is ACTIVE_LOW, and initially de-asserted */ - gpio_request(EXYNOS5_GPIO_Y25, "dp_bridge_pd"); - gpio_set_pull(EXYNOS5_GPIO_Y25, S5P_GPIO_PULL_NONE); - gpio_direction_output(EXYNOS5_GPIO_Y25, 1); - - /* Reset is ACTIVE_LOW */ - gpio_request(EXYNOS5_GPIO_X15, "dp_bridge_reset"); - gpio_set_pull(EXYNOS5_GPIO_X15, S5P_GPIO_PULL_NONE); - gpio_direction_output(EXYNOS5_GPIO_X15, 0); - - udelay(10); - gpio_set_value(EXYNOS5_GPIO_X15, 1); - - gpio_request(EXYNOS5_GPIO_X07, "dp_bridge_hpd"); - gpio_direction_input(EXYNOS5_GPIO_X07); - - /* - * We need to wait for 90ms after bringing up the bridge since there - * is a phantom "high" on the HPD chip during its bootup. The phantom - * high comes within 7ms of de-asserting PD and persists for at least - * 15ms. The real high comes roughly 50ms after PD is de-asserted. The - * phantom high makes it hard for us to know when the NXP chip is up. - */ - mdelay(90); - - for (num_tries = 0; num_tries < max_tries; num_tries++) { - /* Check HPD. If it's high, we're all good. */ - if (gpio_get_value(EXYNOS5_GPIO_X07)) - return 0; - - debug("%s: eDP bridge failed to come up; try %d of %d\n", - __func__, num_tries, max_tries); - } - - /* Immediately go into bridge reset if the hp line is not high */ - return -ENODEV; -} - -void exynos_cfg_lcd_gpio(void) -{ - /* For Backlight */ - gpio_request(EXYNOS5_GPIO_B20, "lcd_backlight"); - gpio_cfg_pin(EXYNOS5_GPIO_B20, S5P_GPIO_OUTPUT); - gpio_set_value(EXYNOS5_GPIO_B20, 1); - - /* LCD power on */ - gpio_request(EXYNOS5_GPIO_X15, "lcd_power"); - gpio_cfg_pin(EXYNOS5_GPIO_X15, S5P_GPIO_OUTPUT); - gpio_set_value(EXYNOS5_GPIO_X15, 1); - - /* Set Hotplug detect for DP */ - gpio_cfg_pin(EXYNOS5_GPIO_X07, S5P_GPIO_FUNC(0x3)); -} - -void exynos_set_dp_phy(unsigned int onoff) -{ - set_dp_phy_ctrl(onoff); -} - -void exynos_backlight_on(unsigned int on) -{ - debug("%s(%u)\n", __func__, on); - - if (!on) - return; - -#ifdef CONFIG_POWER_TPS65090 - int ret; - - ret = tps65090_fet_enable(1); /* Enable FET1, backlight */ - if (ret) - return; - - /* T5 in the LCD timing spec (defined as > 10ms) */ - mdelay(10); - - /* board_dp_backlight_pwm */ - gpio_direction_output(EXYNOS5_GPIO_B20, 1); - - /* T6 in the LCD timing spec (defined as > 10ms) */ - mdelay(10); - - /* board_dp_backlight_en */ - gpio_request(EXYNOS5_GPIO_X30, "board_dp_backlight_en"); - gpio_direction_output(EXYNOS5_GPIO_X30, 1); -#endif -} - -void exynos_lcd_power_on(void) -{ - int ret; - - debug("%s\n", __func__); - -#ifdef CONFIG_POWER_TPS65090 - /* board_dp_lcd_vdd */ - tps65090_fet_enable(6); /* Enable FET6, lcd panel */ -#endif - - ret = board_dp_bridge_setup(); - if (ret && ret != -ENODEV) - printf("LCD bridge failed to enable: %d\n", ret); -} - -#endif diff --git a/include/configs/exynos5-dt-common.h b/include/configs/exynos5-dt-common.h index 29ef84b6a3..8b61a52c5a 100644 --- a/include/configs/exynos5-dt-common.h +++ b/include/configs/exynos5-dt-common.h @@ -16,6 +16,8 @@ "stdout=serial,lcd\0" \ "stderr=serial,lcd\0" +#define CONFIG_EXYNOS5_DT + #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SPI_BASE 0x12D30000 #define FLASH_SIZE (4 << 20)