From: Mathias K Date: Sat, 24 Dec 2011 14:26:12 +0000 (+0100) Subject: command: print BUG warning when usage is missing X-Git-Tag: v0.6.0-rc1~337 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=54d6330b78f46678e78d1ffb265c65fcc8991e83;p=openocd command: print BUG warning when usage is missing These error messages will prompt patches to be submitted for missing .usage or empty fields. All of the below must be resolved before next release. The Jim defined commands are excluded from this checklist because the help text can be set later than during command registration. strlen(.usage) == 0 means that the command expects no arguments. Updates to this patch in Gerrit to fix problems below are most welcome. Anyone can push updated versions of a patch to Gerrit. If there are no further updates to this patch within a week, it will be pushed to the master branch to prompt more fixes. These were caught by launching OpenOCD. Error: BUG: command 'command' does not have the '.usage' field filled out Error: BUG: command 'script' does not have the '.usage' field filled out Error: BUG: command 'power_restore' does not have the '.usage' field filled out Error: BUG: command 'srst_deasserted' does not have the '.usage' field filled out Error: BUG: command 'measure_clk' does not have the '.usage' field filled out Error: BUG: command 'exit' does not have the '.usage' field filled out Error: BUG: command 'shutdown' does not have the '.usage' field filled out Error: BUG: command 'gdb_sync' does not have the '.usage' field filled out Error: BUG: command 'interface_list' does not have the '.usage' field filled out Error: BUG: command 'target' does not have the '.usage' field filled out Error: BUG: command 'target init' does not have the '.usage' field filled out Error: BUG: command 'flash' does not have the '.usage' field filled out Error: BUG: command 'flash init' does not have the '.usage' field filled out Error: BUG: command 'flash banks' does not have the '.usage' field filled out Error: BUG: command 'nand' does not have the '.usage' field filled out Error: BUG: command 'nand drivers' does not have the '.usage' field filled out Error: BUG: command 'nand init' does not have the '.usage' field filled out Error: BUG: command 'pld' does not have the '.usage' field filled out Error: BUG: command 'pld init' does not have the '.usage' field filled out Error: BUG: command 'mflash' does not have the '.usage' field filled out Error: BUG: command 'mflash init' does not have the '.usage' field filled out Error: BUG: command 'dummy' does not have the '.usage' field filled out Error: BUG: command 'dummy foo' does not have the '.usage' field filled out Error: BUG: command 'scan_chain' does not have the '.usage' field filled out Error: BUG: command 'jtag' does not have the '.usage' field filled out Error: BUG: command 'jtag init' does not have the '.usage' field filled out Error: BUG: command 'arm' does not have the '.usage' field filled out Error: BUG: command 'arm reg' does not have the '.usage' field filled out Error: BUG: command 'etm' does not have the '.usage' field filled out Error: BUG: command 'arm7_9' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu arm' does not have the '.usage' field filled out Error: BUG: command 'arm reg' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu etm' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu arm7_9' does not have the '.usage' field filled out Error: BUG: command 'target_request' does not have the '.usage' field filled out ^C oyvind@fierce:~/openocd$ openocd -c "interface dummy" -f board/at91eb40a.cfg 2>&1 | grep -w BUG Error: BUG: command 'command' does not have the '.usage' field filled out Error: BUG: command 'script' does not have the '.usage' field filled out Error: BUG: command 'power_restore' does not have the '.usage' field filled out Error: BUG: command 'srst_deasserted' does not have the '.usage' field filled out Error: BUG: command 'measure_clk' does not have the '.usage' field filled out Error: BUG: command 'exit' does not have the '.usage' field filled out Error: BUG: command 'shutdown' does not have the '.usage' field filled out Error: BUG: command 'gdb_sync' does not have the '.usage' field filled out Error: BUG: command 'interface_list' does not have the '.usage' field filled out Error: BUG: command 'target' does not have the '.usage' field filled out Error: BUG: command 'target init' does not have the '.usage' field filled out Error: BUG: command 'flash' does not have the '.usage' field filled out Error: BUG: command 'flash init' does not have the '.usage' field filled out Error: BUG: command 'flash banks' does not have the '.usage' field filled out Error: BUG: command 'nand' does not have the '.usage' field filled out Error: BUG: command 'nand drivers' does not have the '.usage' field filled out Error: BUG: command 'nand init' does not have the '.usage' field filled out Error: BUG: command 'pld' does not have the '.usage' field filled out Error: BUG: command 'pld init' does not have the '.usage' field filled out Error: BUG: command 'mflash' does not have the '.usage' field filled out Error: BUG: command 'mflash init' does not have the '.usage' field filled out Error: BUG: command 'dummy' does not have the '.usage' field filled out Error: BUG: command 'dummy foo' does not have the '.usage' field filled out Error: BUG: command 'scan_chain' does not have the '.usage' field filled out Error: BUG: command 'jtag' does not have the '.usage' field filled out Error: BUG: command 'jtag init' does not have the '.usage' field filled out Error: BUG: command 'arm' does not have the '.usage' field filled out Error: BUG: command 'arm reg' does not have the '.usage' field filled out Error: BUG: command 'etm' does not have the '.usage' field filled out Error: BUG: command 'arm7_9' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu arm' does not have the '.usage' field filled out Error: BUG: command 'arm reg' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu etm' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu arm7_9' does not have the '.usage' field filled out Error: BUG: command 'target_request' does not have the '.usage' field filled out Change-Id: I2c3e529530a15d2295a1950ffc59e8f2fc661012 Signed-off-by: Øyvind Harboe Signed-off-by: Mathias K Reviewed-on: http://openocd.zylin.com/299 Tested-by: jenkins Reviewed-by: Øyvind Harboe Reviewed-by: Spencer Oliver --- diff --git a/src/helper/command.c b/src/helper/command.c index 552031df..65e538bb 100644 --- a/src/helper/command.c +++ b/src/helper/command.c @@ -323,6 +323,22 @@ static struct command *command_new(struct command_context *cmd_ctx, { assert(cr->name); + /* + If it is a non-jim command with no .usage specified, + log an error. + + strlen(.usage) == 0 means that the command takes no + arguments. + */ + if ((cr->jim_handler == NULL) && + (cr->usage == NULL)) { + LOG_DEBUG("BUG: command '%s%s%s' does not have the " + "'.usage' field filled out", + parent && parent->name ? parent->name : "", + parent && parent->name ? " " : "", + cr->name); + } + struct command *c = calloc(1, sizeof(struct command)); if (NULL == c) return NULL; diff --git a/src/openocd.c b/src/openocd.c index 3f0e1428..60cbf232 100644 --- a/src/openocd.c +++ b/src/openocd.c @@ -195,6 +195,7 @@ static const struct command_registration openocd_command_handlers[] = { .handler = &handle_noinit_command, .mode = COMMAND_CONFIG, .help = "Prevent 'init' from being called at startup.", + .usage = "" }, { .name = "init", @@ -204,14 +205,14 @@ static const struct command_registration openocd_command_handlers[] = { "Changes command mode from CONFIG to EXEC. " "Unless 'noinit' is called, this command is " "called automatically at the end of startup.", - + .usage = "" }, { .name = "add_script_search_dir", .handler = &handle_add_script_search_dir_command, .mode = COMMAND_ANY, .help = "dir to search for config files and scripts", - + .usage = "" }, COMMAND_REGISTRATION_DONE }; diff --git a/src/target/target.c b/src/target/target.c index 6b034665..7763685d 100644 --- a/src/target/target.c +++ b/src/target/target.c @@ -5534,11 +5534,13 @@ static const struct command_registration target_exec_command_handlers[] = { .mode = COMMAND_EXEC, .help = "loads active fast load image to current target " "- mainly for profiling purposes", + .usage = "", }, { .name = "profile", .handler = handle_profile_command, .mode = COMMAND_EXEC, + .usage = "seconds filename", .help = "profiling samples the CPU PC", }, /** @todo don't register virt2phys() unless target supports it */ @@ -5599,6 +5601,7 @@ static const struct command_registration target_exec_command_handlers[] = { .name = "soft_reset_halt", .handler = handle_soft_reset_halt_command, .mode = COMMAND_EXEC, + .usage = "", .help = "halt the target and do a soft reset", }, { @@ -5655,7 +5658,7 @@ static const struct command_registration target_exec_command_handlers[] = { .handler = handle_bp_command, .mode = COMMAND_EXEC, .help = "list or set hardware or software breakpoint", - .usage = "usage: bp
[] ['hw'|'hw_ctx']", + .usage = "
[] ['hw'|'hw_ctx']", }, { .name = "rbp", diff --git a/src/target/trace.c b/src/target/trace.c index a8ec143e..7604db8b 100644 --- a/src/target/trace.c +++ b/src/target/trace.c @@ -179,6 +179,7 @@ static const struct command_registration trace_command_handlers[] = { .name = "trace", .mode = COMMAND_EXEC, .help = "trace command group", + .usage = "", .chain = trace_exec_command_handlers, }, COMMAND_REGISTRATION_DONE diff --git a/src/transport/transport.c b/src/transport/transport.c index b5e4b900..3e672211 100644 --- a/src/transport/transport.c +++ b/src/transport/transport.c @@ -336,12 +336,14 @@ static const struct command_registration transport_commands[] = { */ .mode = COMMAND_ANY, .help = "Initialize this session's transport", + .usage = "" }, { .name = "list", .handler = handle_transport_list, .mode = COMMAND_ANY, .help = "list all built-in transports", + .usage = "" }, { .name = "select", @@ -359,6 +361,7 @@ static const struct command_registration transport_group[] = { .mode = COMMAND_ANY, .help = "Transport command group", .chain = transport_commands, + .usage = "" }, COMMAND_REGISTRATION_DONE };