From: Nobuhiro Iwamatsu Date: Fri, 7 Mar 2008 07:04:25 +0000 (+0900) Subject: pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option X-Git-Tag: v1.3.3-rc1~192 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=55774b512fdf63c0516d441cc5da7c54bbffb7f2;p=u-boot pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option In current source code, when the device number of PCI is 0, process PCI bridge without fail. However, when the device number is 0, it is not PCI always bridge. There are times when device of PCI allocates. When CONFIG_PCI_SKIP_HOST_BRIDGE is enable, this problem is solved when use this patch. Signed-off-by: Nobuhiro Iwamatsu Acked-by: Stefan Roese --- diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 50ca6b0bad..7944b6684a 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -425,6 +425,9 @@ int pci_hose_scan_bus(struct pci_controller *hose, int bus) dev < PCI_BDF(bus,PCI_MAX_PCI_DEVICES-1,PCI_MAX_PCI_FUNCTIONS-1); dev += PCI_BDF(0,0,1)) { + + /* Bus 0 is not necessarily PCI bridge. */ +#if defined(CONFIG_PCI_SKIP_HOST_BRIDGE) /* Skip our host bridge */ if ( dev == PCI_BDF(hose->first_busno,0,0) ) { #if defined(CONFIG_PCI_CONFIG_HOST_BRIDGE) /* don't skip host bridge */ @@ -434,10 +437,11 @@ int pci_hose_scan_bus(struct pci_controller *hose, int bus) if (getenv("pciconfighost") == NULL) { continue; /* Skip our host bridge */ } -#else +#else /* CONFIG_PCI_CONFIG_HOST_BRIDGE */ continue; /* Skip our host bridge */ -#endif +#endif /* CONFIG_PCI_CONFIG_HOST_BRIDGE */ } +#endif /* CONFIG_PCI_SKIP_HOST_BRIDGE */ if (PCI_FUNC(dev) && !found_multi) continue; @@ -473,8 +477,11 @@ int pci_hose_scan_bus(struct pci_controller *hose, int bus) hose->fixup_irq(hose, dev); #ifdef CONFIG_PCI_SCAN_SHOW +#if defined(CONFIG_PCI_SKIP_HOST_BRIDGE) /* Skip our host bridge */ - if ( dev != PCI_BDF(hose->first_busno,0,0) ) { + if ( dev != PCI_BDF(hose->first_busno,0,0) ) +#endif + { unsigned char int_line; pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_LINE,