From: Bin Meng Date: Tue, 12 Jan 2016 06:41:22 +0000 (-0800) Subject: net: tsec: Use tsec_private pointer as the parameter for internal routines X-Git-Tag: v2016.03-rc1~42^2~26 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=56a27a1e6cbc414a8d5b9e59314119777c092635;p=u-boot net: tsec: Use tsec_private pointer as the parameter for internal routines For internal routines like redundant_init(), startup_tsec() and init_phy(), change to use tsec_private pointer as the parameter. Signed-off-by: Bin Meng Acked-by: Joe Hershberger --- diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index ea2363e0e7..7e8bc68e80 100644 --- a/drivers/net/tsec.c +++ b/drivers/net/tsec.c @@ -328,9 +328,8 @@ static void tsec_halt(struct eth_device *dev) * of the eTSEC port initialization sequence, * the eTSEC Rx logic may not be properly initialized. */ -void redundant_init(struct eth_device *dev) +void redundant_init(struct tsec_private *priv) { - struct tsec_private *priv = dev->priv; struct tsec __iomem *regs = priv->regs; uint t, count = 0; int fail = 1; @@ -365,14 +364,14 @@ void redundant_init(struct eth_device *dev) do { uint16_t status; - tsec_send(dev, (void *)pkt, sizeof(pkt)); + tsec_send(priv->dev, (void *)pkt, sizeof(pkt)); /* Wait for buffer to be received */ for (t = 0; in_be16(&priv->rxbd[priv->rx_idx].status) & RXBD_EMPTY; t++) { if (t >= 10 * TOUT_LOOP) { - printf("%s: tsec: rx error\n", dev->name); + printf("%s: tsec: rx error\n", priv->dev->name); break; } } @@ -412,9 +411,8 @@ void redundant_init(struct eth_device *dev) * Set up the buffers and their descriptors, and bring up the * interface */ -static void startup_tsec(struct eth_device *dev) +static void startup_tsec(struct tsec_private *priv) { - struct tsec_private *priv = (struct tsec_private *)dev->priv; struct tsec __iomem *regs = priv->regs; uint16_t status; int i; @@ -451,7 +449,7 @@ static void startup_tsec(struct eth_device *dev) #ifdef CONFIG_SYS_FSL_ERRATUM_NMG_ETSEC129 svr = get_svr(); if ((SVR_MAJ(svr) == 1) || IS_SVR_REV(svr, 2, 0)) - redundant_init(dev); + redundant_init(priv); #endif /* Enable Transmit and Receive */ setbits_be32(®s->maccfg1, MACCFG1_RX_EN | MACCFG1_TX_EN); @@ -504,7 +502,7 @@ static int tsec_init(struct eth_device *dev, bd_t * bd) init_registers(regs); /* Ready the device for tx/rx */ - startup_tsec(dev); + startup_tsec(priv); /* Start up the PHY */ ret = phy_startup(priv->phydev); @@ -567,9 +565,8 @@ static phy_interface_t tsec_get_interface(struct tsec_private *priv) * properly. If the PHY is not recognized, then return 0 * (failure). Otherwise, return 1 */ -static int init_phy(struct eth_device *dev) +static int init_phy(struct tsec_private *priv) { - struct tsec_private *priv = (struct tsec_private *)dev->priv; struct phy_device *phydev; struct tsec __iomem *regs = priv->regs; u32 supported = (SUPPORTED_10baseT_Half | @@ -588,7 +585,8 @@ static int init_phy(struct eth_device *dev) if (priv->interface == PHY_INTERFACE_MODE_SGMII) tsec_configure_serdes(priv); - phydev = phy_connect(priv->bus, priv->phyaddr, dev, priv->interface); + phydev = phy_connect(priv->bus, priv->phyaddr, priv->dev, + priv->interface); if (!phydev) return 0; @@ -633,6 +631,7 @@ static int tsec_initialize(bd_t *bis, struct tsec_info_struct *tsec_info) sprintf(dev->name, tsec_info->devname); priv->interface = tsec_info->interface; priv->bus = miiphy_get_dev_by_name(tsec_info->mii_devname); + priv->dev = dev; dev->iobase = 0; dev->priv = priv; dev->init = tsec_init; @@ -655,7 +654,7 @@ static int tsec_initialize(bd_t *bis, struct tsec_info_struct *tsec_info) clrbits_be32(&priv->regs->maccfg1, MACCFG1_SOFT_RESET); /* Try to initialize PHY here, and return */ - return init_phy(dev); + return init_phy(priv); } /* diff --git a/include/tsec.h b/include/tsec.h index 72002296e6..e8b03d64f5 100644 --- a/include/tsec.h +++ b/include/tsec.h @@ -402,6 +402,7 @@ struct tsec_private { u32 flags; uint rx_idx; /* index of the current RX buffer */ uint tx_idx; /* index of the current TX buffer */ + struct eth_device *dev; }; struct tsec_info_struct {