From: Simon Glass Date: Thu, 13 Aug 2015 16:36:17 +0000 (-0600) Subject: x86: Add a simple interrupt script to the README X-Git-Tag: v2015.10-rc2~10^2~1 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=590870e7e8919bca7adfd97069ac5b2a924b3151;p=u-boot x86: Add a simple interrupt script to the README It is a bit tedious to figure out the interrupt configuration for a new x86 platform. Add a script which can do this, based on the output of 'pci long'. This may be helpful in some cases. Signed-off-by: Simon Glass Reviewed-by: Bin Meng Tested-by: Bin Meng --- diff --git a/doc/README.x86 b/doc/README.x86 index 9012541cad..e7dc090e76 100644 --- a/doc/README.x86 +++ b/doc/README.x86 @@ -718,6 +718,21 @@ allocation and assignment will be done by U-Boot automatically. Now you can enable CONFIG_GENERATE_PIRQ_TABLE for testing Linux kernel using i8259 PIC and CONFIG_GENERATE_MP_TABLE for testing Linux kernel using local APIC and I/O APIC. +This script might be useful. If you feed it the output of 'pci long' from +U-Boot then it will generate a device tree fragment with the interrupt +configuration for each device (note it needs gawk 4.0.0): + + $ cat console_output |awk '/PCI/ {device=$4} /interrupt line/ {line=$4} \ + /interrupt pin/ {pin = $4; if (pin != "0x00" && pin != "0xff") \ + {patsplit(device, bdf, "[0-9a-f]+"); \ + printf "PCI_BDF(%d, %d, %d) INT%c PIRQ%c\n", strtonum("0x" bdf[1]), \ + strtonum("0x" bdf[2]), bdf[3], strtonum(pin) + 64, 64 + strtonum(pin)}}' + +Example output: + PCI_BDF(0, 2, 0) INTA PIRQA + PCI_BDF(0, 3, 0) INTA PIRQA +... + TODO List --------- - Audio