From: Mateusz Kulikowski Date: Thu, 31 Mar 2016 21:12:26 +0000 (+0200) Subject: ehci: Add support for Qualcomm EHCI X-Git-Tag: v2016.05-rc1~50 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=5a8221181edca991f7cfbf90b7f60ebf3c0b4970;p=u-boot ehci: Add support for Qualcomm EHCI This driver is able to reconfigure OTG controller into HOST mode. Board can add board-specific initialization as board_prepare_usb(). It requires USB_ULPI_VIEWPORT enabled in board configuration. Signed-off-by: Mateusz Kulikowski Acked-by: Marek Vasut Tested-by: Simon Glass --- diff --git a/doc/device-tree-bindings/usb/ehci-msm.txt b/doc/device-tree-bindings/usb/ehci-msm.txt new file mode 100644 index 0000000000..205bb07220 --- /dev/null +++ b/doc/device-tree-bindings/usb/ehci-msm.txt @@ -0,0 +1,10 @@ +Chipidea EHCI controller (part of OTG controller) used on Qualcomm devices. + +Required properties: +- compatible: must be "qcom,ehci-host" +- reg: start address and size of the registers + +ehci@78d9000 { + compatible = "qcom,ehci-host"; + reg = <0x78d9000 0x400>; +}; diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 9332374193..d2363c8067 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -74,6 +74,17 @@ config USB_EHCI_MX6 ---help--- Enables support for the on-chip EHCI controller on i.MX6 SoCs. +config USB_EHCI_MSM + bool "Support for Qualcomm on-chip EHCI USB controller" + depends on DM_USB + select USB_ULPI_VIEWPORT + default n + ---help--- + Enables support for the on-chip EHCI controller on Qualcomm + Snapdragon SoCs. + This driver supports combination of Chipidea USB controller + and Synapsys USB PHY in host mode only. + config USB_EHCI_GENERIC bool "Support for generic EHCI USB controller" depends on OF_CONTROL diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 9a87d2bf62..507519ea72 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -43,6 +43,7 @@ obj-$(CONFIG_USB_EHCI_MX7) += ehci-mx6.o obj-$(CONFIG_USB_EHCI_OMAP) += ehci-omap.o obj-$(CONFIG_USB_EHCI_PPC4XX) += ehci-ppc4xx.o obj-$(CONFIG_USB_EHCI_MARVELL) += ehci-marvell.o +obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o obj-$(CONFIG_USB_EHCI_SPEAR) += ehci-spear.o obj-$(CONFIG_USB_EHCI_SUNXI) += ehci-sunxi.o diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c new file mode 100644 index 0000000000..6484c1c334 --- /dev/null +++ b/drivers/usb/host/ehci-msm.c @@ -0,0 +1,178 @@ +/* + * Qualcomm EHCI driver + * + * (C) Copyright 2015 Mateusz Kulikowski + * + * Based on Linux driver + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "ehci.h" + +/* PHY viewport regs */ +#define ULPI_MISC_A_READ 0x96 +#define ULPI_MISC_A_SET 0x97 +#define ULPI_MISC_A_CLEAR 0x98 +#define ULPI_MISC_A_VBUSVLDEXTSEL (1 << 1) +#define ULPI_MISC_A_VBUSVLDEXT (1 << 0) + +#define GEN2_SESS_VLD_CTRL_EN (1 << 7) + +#define SESS_VLD_CTRL (1 << 25) + +struct msm_ehci_priv { + struct ehci_ctrl ctrl; /* Needed by EHCI */ + struct usb_ehci *ehci; /* Start of IP core*/ + struct ulpi_viewport ulpi_vp; /* ULPI Viewport */ +}; + +int __weak board_prepare_usb(enum usb_init_type type) +{ + return 0; +} + +static void setup_usb_phy(struct msm_ehci_priv *priv) +{ + /* Select and enable external configuration with USB PHY */ + ulpi_write(&priv->ulpi_vp, (u8 *)ULPI_MISC_A_SET, + ULPI_MISC_A_VBUSVLDEXTSEL | ULPI_MISC_A_VBUSVLDEXT); +} + +static void reset_usb_phy(struct msm_ehci_priv *priv) +{ + /* Disable VBUS mimicing in the controller. */ + ulpi_write(&priv->ulpi_vp, (u8 *)ULPI_MISC_A_CLEAR, + ULPI_MISC_A_VBUSVLDEXTSEL | ULPI_MISC_A_VBUSVLDEXT); +} + + +static int msm_init_after_reset(struct ehci_ctrl *dev) +{ + struct msm_ehci_priv *p = container_of(dev, struct msm_ehci_priv, ctrl); + struct usb_ehci *ehci = p->ehci; + + /* select ULPI phy */ + writel(PORT_PTS_ULPI, &ehci->portsc); + setup_usb_phy(p); + + /* Enable sess_vld */ + setbits_le32(&ehci->genconfig2, GEN2_SESS_VLD_CTRL_EN); + + /* Enable external vbus configuration in the LINK */ + setbits_le32(&ehci->usbcmd, SESS_VLD_CTRL); + + /* USB_OTG_HS_AHB_BURST */ + writel(0x0, &ehci->sbuscfg); + + /* USB_OTG_HS_AHB_MODE: HPROT_MODE */ + /* Bus access related config. */ + writel(0x08, &ehci->sbusmode); + + /* set mode to host controller */ + writel(CM_HOST, &ehci->usbmode); + + return 0; +} + +static const struct ehci_ops msm_ehci_ops = { + .init_after_reset = msm_init_after_reset +}; + +static int ehci_usb_probe(struct udevice *dev) +{ + struct msm_ehci_priv *p = dev_get_priv(dev); + struct usb_ehci *ehci = p->ehci; + struct ehci_hccr *hccr; + struct ehci_hcor *hcor; + int ret; + + hccr = (struct ehci_hccr *)((phys_addr_t)&ehci->caplength); + hcor = (struct ehci_hcor *)((phys_addr_t)hccr + + HC_LENGTH(ehci_readl(&(hccr)->cr_capbase))); + + ret = board_prepare_usb(USB_INIT_HOST); + if (ret < 0) + return ret; + + return ehci_register(dev, hccr, hcor, &msm_ehci_ops, 0, USB_INIT_HOST); +} + +static int ehci_usb_remove(struct udevice *dev) +{ + struct msm_ehci_priv *p = dev_get_priv(dev); + struct usb_ehci *ehci = p->ehci; + int ret; + + ret = ehci_deregister(dev); + if (ret) + return ret; + + /* Stop controller. */ + clrbits_le32(&ehci->usbcmd, CMD_RUN); + + reset_usb_phy(p); + + ret = board_prepare_usb(USB_INIT_DEVICE); /* Board specific hook */ + if (ret < 0) + return ret; + + /* Reset controller */ + setbits_le32(&ehci->usbcmd, CMD_RESET); + + /* Wait for reset */ + if (wait_for_bit(__func__, &ehci->usbcmd, CMD_RESET, false, 30, + false)) { + printf("Stuck on USB reset.\n"); + return -ETIMEDOUT; + } + + return 0; +} + +static int ehci_usb_ofdata_to_platdata(struct udevice *dev) +{ + struct msm_ehci_priv *priv = dev_get_priv(dev); + + priv->ulpi_vp.port_num = 0; + priv->ehci = (void *)dev_get_addr(dev); + + if (priv->ehci == (void *)FDT_ADDR_T_NONE) + return -EINVAL; + + /* Warning: this will not work if viewport address is > 64 bit due to + * ULPI design. + */ + priv->ulpi_vp.viewport_addr = (phys_addr_t)&priv->ehci->ulpi_viewpoint; + + return 0; +} + +static const struct udevice_id ehci_usb_ids[] = { + { .compatible = "qcom,ehci-host", }, + { } +}; + +U_BOOT_DRIVER(usb_ehci) = { + .name = "ehci_msm", + .id = UCLASS_USB, + .of_match = ehci_usb_ids, + .ofdata_to_platdata = ehci_usb_ofdata_to_platdata, + .probe = ehci_usb_probe, + .remove = ehci_usb_remove, + .ops = &ehci_usb_ops, + .priv_auto_alloc_size = sizeof(struct msm_ehci_priv), + .flags = DM_FLAG_ALLOC_PRIV_DMA, +};