From: Fabio Estevam <fabio.estevam@nxp.com>
Date: Wed, 5 Oct 2016 18:00:58 +0000 (-0300)
Subject: udoo: Add a README file
X-Git-Tag: v2016.11-rc2~19^2~12
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=5b0d03b306b8d3010835d8b191bfc0581735021f;p=u-boot

udoo: Add a README file

Add a README file to explain how to build and flash the SD card
for Udoo boards.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---

diff --git a/board/udoo/README b/board/udoo/README
new file mode 100644
index 0000000000..6fbcc598f7
--- /dev/null
+++ b/board/udoo/README
@@ -0,0 +1,21 @@
+How to use U-Boot on MX6Q/DL Udoo boards
+----------------------------------------
+
+- Build U-Boot for MX6Q/DL Udoo boards:
+
+$ make mrproper
+$ make udoo_defconfig
+$ make
+
+This will generate the SPL image called SPL and the u-boot.img.
+
+- Flash the SPL image into the SD card:
+
+sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
+
+- Flash the u-boot.img image into the SD card:
+
+sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync
+
+- Insert the SD card in the board, power it up and U-Boot messages should
+come up.